{
"NDC": [
{
"NDCCode": "69097-037-81",
"PackageDescription": "21 CAPSULE in 1 BOTTLE (69097-037-81) ",
"NDC11Code": "69097-0037-81",
"ProductNDC": "69097-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pomalidomide",
"NonProprietaryName": "Pomalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219718",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "POMALIDOMIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260830",
"SamplePackage": "N",
"IndicationAndUsage": "Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).",
"Description": "Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "69097-037-07",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (69097-037-07) ",
"NDC11Code": "69097-0037-07",
"ProductNDC": "69097-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pomalidomide",
"NonProprietaryName": "Pomalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219718",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "POMALIDOMIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260830",
"SamplePackage": "N",
"IndicationAndUsage": "Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).",
"Description": "Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "65954-037-81",
"PackageDescription": "130 g in 1 BOTTLE (65954-037-81) ",
"NDC11Code": "65954-0037-81",
"ProductNDC": "65954-037",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Colgate Kids",
"ProprietaryNameSuffix": "2in1 Strawberry",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "GEL, DENTIFRICE",
"RouteName": "DENTAL",
"StartMarketingDate": "20110726",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part355",
"LabelerName": "Mission Hills S.A de C.V",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": "1.1",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-12-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20110726",
"SamplePackage": "N"
},
{
"NDCCode": "73069-037-81",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BOX (73069-037-81) > 100 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "73069-0037-81",
"ProductNDC": "73069-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Viatrexx-articula",
"NonProprietaryName": "Anti-interleukin 1, Ankle Articulations, Beta Endorphin, Bfgf, Calcaneal Tendon, Hip Articulation, Knee Articulation, Liver, Transforming Growth Factor-1, Transforming Gf-beta",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "VIATREXX BIO INCORPORATED",
"SubstanceName": "ANTI-INTERLEUKIN-1.ALPHA. IMMUNOGLOBULIN G RABBIT; BOS TAURUS ANKLE JOINT; SUS SCROFA ANKLE JOINT; METENKEFALIN; ERSOFERMIN; BOS TAURUS ACHILLES TENDON; SUS SCROFA ACHILLES TENDON; BOS TAURUS HIP JOINT; SUS SCROFA HIP JOINT; BOS TAURUS KNEE JOINT; SUS SCROFA KNEE JOINT; BEEF LIVER; PORK LIVER; TRANSFORMING GROWTH FACTOR BETA-1; AVOTERMIN",
"StrengthNumber": "201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 31; 31",
"StrengthUnit": "[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2020-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190506",
"SamplePackage": "N"
},
{
"NDCCode": "69097-036-81",
"PackageDescription": "21 CAPSULE in 1 BOTTLE (69097-036-81) ",
"NDC11Code": "69097-0036-81",
"ProductNDC": "69097-036",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pomalidomide",
"NonProprietaryName": "Pomalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219718",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "POMALIDOMIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260830",
"SamplePackage": "N",
"IndicationAndUsage": "Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).",
"Description": "Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "69097-038-81",
"PackageDescription": "21 CAPSULE in 1 BOTTLE (69097-038-81) ",
"NDC11Code": "69097-0038-81",
"ProductNDC": "69097-038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pomalidomide",
"NonProprietaryName": "Pomalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219718",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "POMALIDOMIDE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260830",
"SamplePackage": "N",
"IndicationAndUsage": "Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).",
"Description": "Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "69097-039-81",
"PackageDescription": "21 CAPSULE in 1 BOTTLE (69097-039-81) ",
"NDC11Code": "69097-0039-81",
"ProductNDC": "69097-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pomalidomide",
"NonProprietaryName": "Pomalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219718",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "POMALIDOMIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260830",
"SamplePackage": "N",
"IndicationAndUsage": "Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).",
"Description": "Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "69097-287-81",
"PackageDescription": "20 TABLET in 1 BOTTLE (69097-287-81) ",
"NDC11Code": "69097-0287-81",
"ProductNDC": "69097-287",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076890",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2023-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20120330",
"SamplePackage": "N"
},
{
"NDCCode": "69097-383-81",
"PackageDescription": "21 CAPSULE in 1 BOTTLE, PLASTIC (69097-383-81) ",
"NDC11Code": "69097-0383-81",
"ProductNDC": "69097-383",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220906",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210435",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220906",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1)., 3 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2)., 4 Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib (1.3)., 5 Previously treated follicular lymphoma (FL), in combination with a rituximab product (1.4)., 6 Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product (1.5).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and with relative molecular mass 259.27. Lenalidomide is an off-white to pale-yellow solid powder. It is freely soluble in dimethyl formamide and practically insoluble in water, diethyl ether, ethanol, and buffered aqueous solvents. Solubility was significantly lower in buffers, ranging from ranging from 1.2 to 6.8 as 0.01g in 100 mL. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, yellow iron oxide, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 15 mg capsule shell contains gelatin, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 20 mg capsule shell contains gelatin, yellow iron oxide, FD&C Blue # 2, titanium dioxide, and black ink. The imprinting ink for 5 mg, 10 mg, 15 mg and 25 mg contains black iron oxide, potassium hydroxide, propylene glycol, purified water, and shellac. The imprinting ink for 20 mg contains black iron oxide, D & C yellow # 10, FD & C blue # 1, FD & C blue # 2, FD & C red # 40, and propylene glycol and shellac glaze."
},
{
"NDCCode": "69097-384-81",
"PackageDescription": "21 CAPSULE in 1 BOTTLE (69097-384-81) ",
"NDC11Code": "69097-0384-81",
"ProductNDC": "69097-384",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210435",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230307",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1)., 3 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2)., 4 Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib (1.3)., 5 Previously treated follicular lymphoma (FL), in combination with a rituximab product (1.4)., 6 Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product (1.5).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and with relative molecular mass 259.27. Lenalidomide is an off-white to pale-yellow solid powder. It is freely soluble in dimethyl formamide and practically insoluble in water, diethyl ether, ethanol, and buffered aqueous solvents. Solubility was significantly lower in buffers, ranging from ranging from 1.2 to 6.8 as 0.01g in 100 mL. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, yellow iron oxide, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 15 mg capsule shell contains gelatin, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 20 mg capsule shell contains gelatin, yellow iron oxide, FD&C Blue # 2, titanium dioxide, and black ink. The imprinting ink for 5 mg, 10 mg, 15 mg and 25 mg contains black iron oxide, potassium hydroxide, propylene glycol, purified water, and shellac. The imprinting ink for 20 mg contains black iron oxide, D & C yellow # 10, FD & C blue # 1, FD & C blue # 2, FD & C red # 40, and propylene glycol and shellac glaze."
},
{
"NDCCode": "69097-385-81",
"PackageDescription": "21 CAPSULE in 1 BOTTLE, PLASTIC (69097-385-81) ",
"NDC11Code": "69097-0385-81",
"ProductNDC": "69097-385",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220906",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210435",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220906",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1)., 3 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2)., 4 Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib (1.3)., 5 Previously treated follicular lymphoma (FL), in combination with a rituximab product (1.4)., 6 Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product (1.5).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and with relative molecular mass 259.27. Lenalidomide is an off-white to pale-yellow solid powder. It is freely soluble in dimethyl formamide and practically insoluble in water, diethyl ether, ethanol, and buffered aqueous solvents. Solubility was significantly lower in buffers, ranging from ranging from 1.2 to 6.8 as 0.01g in 100 mL. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, yellow iron oxide, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 15 mg capsule shell contains gelatin, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 20 mg capsule shell contains gelatin, yellow iron oxide, FD&C Blue # 2, titanium dioxide, and black ink. The imprinting ink for 5 mg, 10 mg, 15 mg and 25 mg contains black iron oxide, potassium hydroxide, propylene glycol, purified water, and shellac. The imprinting ink for 20 mg contains black iron oxide, D & C yellow # 10, FD & C blue # 1, FD & C blue # 2, FD & C red # 40, and propylene glycol and shellac glaze."
},
{
"NDCCode": "62485-037-15",
"PackageDescription": "150000 TABLET, COATED in 1 DRUM (62485-037-15) ",
"NDC11Code": "62485-0037-15",
"ProductNDC": "62485-037",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, COATED",
"StartMarketingDate": "20210125",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "TCB USA Corporation",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "25-JAN-21"
},
{
"NDCCode": "72090-037-01",
"PackageDescription": "500 TABLET in 1 BOTTLE (72090-037-01) ",
"NDC11Code": "72090-0037-01",
"ProductNDC": "72090-037",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gencare-aspirin Low Dose Pain Reliever (nsaid)",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241107",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Pioneer Life Sciences, LLC",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241107",
"SamplePackage": "N",
"IndicationAndUsage": " for the temporary relief of minor aches and pains or as recommended by your doctor. Because of its delayed action, this product will not provide fast relief of headaches or other symptoms needing immediate relief. ask your doctor about other uses for Safety Coated 81 mg Aspirin."
},
{
"NDCCode": "69097-661-03",
"PackageDescription": "1 INHALER in 1 CARTON (69097-661-03) / 60 POWDER in 1 INHALER",
"NDC11Code": "69097-0661-03",
"ProductNDC": "69097-661",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20260727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213087",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "250; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260727",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .",
"Description": "Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "69097-662-03",
"PackageDescription": "1 INHALER in 1 CARTON (69097-662-03) / 60 POWDER in 1 INHALER",
"NDC11Code": "69097-0662-03",
"ProductNDC": "69097-662",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20260727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213087",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "100; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260727",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .",
"Description": "Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "69097-663-03",
"PackageDescription": "1 INHALER in 1 CARTON (69097-663-03) / 60 POWDER in 1 INHALER",
"NDC11Code": "69097-0663-03",
"ProductNDC": "69097-663",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20260727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213087",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "500; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260727",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .",
"Description": "Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "69097-686-34",
"PackageDescription": "1 BOTTLE, WITH APPLICATOR in 1 CARTON (69097-686-34) / 4 mL in 1 BOTTLE, WITH APPLICATOR",
"NDC11Code": "69097-0686-34",
"ProductNDC": "69097-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tavaborole",
"NonProprietaryName": "Tavaborole",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212224",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "TAVABOROLE",
"StrengthNumber": "43.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Boron Compounds [CS], Oxaborole Antifungal [EPC], Protein Synthesis Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210218",
"SamplePackage": "N",
"IndicationAndUsage": "Tavaborole topical solution, 5% is an oxaborole antifungal indicated for the treatment of onychomycosis of the toenails due to Trichophyton rubrum or Trichophyton mentagrophytes.",
"Description": "Tavaborole topical solution, 5% contains tavaborole, 5% (w/w) in a clear, colorless alcohol-based solution for topical use. The active ingredient, tavaborole, is an oxaborole antifungal with the chemical name of 5-fluoro-1,3-dihydro-1-hydroxy-2,1-benzoxaborole. The chemical formula is C7H6BFO2, the molecular weight is 151.93 and the structural formula is. Tavaborole is a white to off-white powder. It is slightly soluble in water and freely soluble in ethanol and propylene glycol. Each mL of tavaborole topical solution contains 43.5 mg of tavaborole. Inactive ingredients include alcohol 74.81 % (v/v), edetate calcium disodium, and propylene glycol."
},
{
"NDCCode": "69097-686-37",
"PackageDescription": "1 BOTTLE, WITH APPLICATOR in 1 CARTON (69097-686-37) / 10 mL in 1 BOTTLE, WITH APPLICATOR",
"NDC11Code": "69097-0686-37",
"ProductNDC": "69097-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tavaborole",
"NonProprietaryName": "Tavaborole",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212224",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "TAVABOROLE",
"StrengthNumber": "43.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Boron Compounds [CS], Oxaborole Antifungal [EPC], Protein Synthesis Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210218",
"SamplePackage": "N",
"IndicationAndUsage": "Tavaborole topical solution, 5% is an oxaborole antifungal indicated for the treatment of onychomycosis of the toenails due to Trichophyton rubrum or Trichophyton mentagrophytes.",
"Description": "Tavaborole topical solution, 5% contains tavaborole, 5% (w/w) in a clear, colorless alcohol-based solution for topical use. The active ingredient, tavaborole, is an oxaborole antifungal with the chemical name of 5-fluoro-1,3-dihydro-1-hydroxy-2,1-benzoxaborole. The chemical formula is C7H6BFO2, the molecular weight is 151.93 and the structural formula is. Tavaborole is a white to off-white powder. It is slightly soluble in water and freely soluble in ethanol and propylene glycol. Each mL of tavaborole topical solution contains 43.5 mg of tavaborole. Inactive ingredients include alcohol 74.81 % (v/v), edetate calcium disodium, and propylene glycol."
},
{
"NDCCode": "0264-2205-00",
"PackageDescription": "16 CONTAINER in 1 CASE (0264-2205-00) / 1000 mL in 1 CONTAINER",
"NDC11Code": "00264-2205-00",
"ProductNDC": "0264-2205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Physiolyte",
"NonProprietaryName": "Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, And Magnesium Chloride",
"DosageFormName": "IRRIGANT",
"RouteName": "IRRIGATION",
"StartMarketingDate": "19840608",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019024",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": ".53; .5; .37; .037; .03",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2023-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19840608",
"SamplePackage": "N",
"IndicationAndUsage": "Physiolyte (A Physiological Irrigating Solution) is indicated for all general irrigation, washing, and rinsing purposes which permit use of a sterile, nonpyrogenic electrolyte solution.",
"Description": "Physiolyte is a sterile, nonpyrogenic solution of electrolytes in water for injection intended only for sterile irrigation, washing, and rinsing purposes. Each 100 mL contains:Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium ChlorideUSP 0.037 g; Magnesium Chloride Hexahydrate USP 0.03 gWater for Injection USP qsGlacial Acetic Acid USP has been added to adjust the pH. pH: 6.8 (6.3–7.3)Calculated Osmolarity: The solution is isotonic (295 mOsmol/liter). Concentration of Electrolytes (mEq/liter): Sodium 140Potassium 5; Magnesium 3; Chloride 98; Acetate (CH3COO−) 27Gluconate (HOCH2(CHOH)4COO−) 23. It contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose or short procedure irrigation. When smaller volumes are required the unused portion should be discarded. Physiolyte may be classified as a sterile irrigant, wash, rinse and pharmaceutical vehicle. The formulas of the active ingredients are. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. Not made with natural rubber latex, PVC or DEHP."
},
{
"NDCCode": "0264-3301-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3301-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-3301-10",
"ProductNDC": "0264-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Sodium Chloride",
"NonProprietaryName": "Heparin Sodium In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250718",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019953",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250718",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-3462-20",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3462-20) / 250 mL in 1 CONTAINER",
"NDC11Code": "00264-3462-20",
"ProductNDC": "0264-3462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Sodium Chloride",
"NonProprietaryName": "Heparin Sodium In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250718",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019953",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "10000",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250718",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-7703-00",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-7703-00) > 1000 mL in 1 CONTAINER",
"NDC11Code": "00264-7703-00",
"ProductNDC": "0264-7703",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isolyte S",
"NonProprietaryName": "Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, And Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19890929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019711",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": ".53; .5; .37; .037; .03",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2020-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890929",
"SamplePackage": "N",
"IndicationAndUsage": "This solution is indicated for use in adults and pediatric patients as a source of electrolytes and water for hydration, and as an alkalinizing agent.",
"Description": "Each 100 mL of Isolyte® S (Multi-Electrolyte Injection) contains:Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 gMagnesium Chloride Hexahydrate USP 0.03 gWater for Injection USP qs. pH adjusted with Glacial Acetic Acid USPpH: 6.7 (6.3–7.3)Calculated Osmolarity: 295 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 140; Potassium 5Magnesium 3; Chloride 98; Acetate (CH3COO−) 27Gluconate (HOCH2(CHOH)4COO−) 23. Isolyte® S is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7704-00",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-7704-00) > 1000 mL in 1 CONTAINER",
"NDC11Code": "00264-7704-00",
"ProductNDC": "0264-7704",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isolyte S In Dextrose",
"NonProprietaryName": "Hydrous Dextrose, Sodium Chloride, Sodium Gluconate, Sodium Acetate Trihydrate, Potassium Chloride And Magnesium Chloride Hexahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19930809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA019843",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE; SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "5; .53; .5; .37; .037; .03",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-04-13",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "0264-7707-00",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-7707-00) / 1000 mL in 1 CONTAINER",
"NDC11Code": "00264-7707-00",
"ProductNDC": "0264-7707",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isolyte S Ph 7.4",
"NonProprietaryName": "Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, Magnesium Chloride, Sodium Phosphate, Dibasic, And Potassium Phosphate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19890929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019696",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; SODIUM PHOSPHATE, DIBASIC; POTASSIUM PHOSPHATE, MONOBASIC",
"StrengthNumber": ".53; .5; .37; .037; .03; .012; .00082",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2023-10-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890929",
"SamplePackage": "N",
"IndicationAndUsage": "This solution is indicated for use in adults as a source of electrolytes and water for hydration, and as an alkalinizing agent.",
"Description": "Each 100 mL of Isolyte® S pH 7.4 (Multi-Electrolyte Injection) contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 gMagnesium Chloride Hexahydrate USP 0.03 g Dibasic Sodium Phosphate Heptahydrate USP 0.012 g Monobasic Potassium Phosphate NF 0.00082 g; Water for Injection USP qs pH may be adjusted with Glacial Acetic Acid USP or Sodium Hydroxide NF pH: 7.4 (7.0–7.8) Calculated Osmolarity: 295 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 141; Potassium 5Magnesium 3; Chloride 98; 0.5 mmole P/literPhosphate (HPO) 1; Acetate (CH3COO–) 27 Gluconate (HOCH2(CHOH)4COO–) 23. Isolyte® S pH 7.4 is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-7707-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-7707-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-7707-10",
"ProductNDC": "0264-7707",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isolyte S Ph 7.4",
"NonProprietaryName": "Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, Magnesium Chloride, Sodium Phosphate, Dibasic, And Potassium Phosphate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19890929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019696",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; SODIUM PHOSPHATE, DIBASIC; POTASSIUM PHOSPHATE, MONOBASIC",
"StrengthNumber": ".53; .5; .37; .037; .03; .012; .00082",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2023-10-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890929",
"SamplePackage": "N",
"IndicationAndUsage": "This solution is indicated for use in adults as a source of electrolytes and water for hydration, and as an alkalinizing agent.",
"Description": "Each 100 mL of Isolyte® S pH 7.4 (Multi-Electrolyte Injection) contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 gMagnesium Chloride Hexahydrate USP 0.03 g Dibasic Sodium Phosphate Heptahydrate USP 0.012 g Monobasic Potassium Phosphate NF 0.00082 g; Water for Injection USP qs pH may be adjusted with Glacial Acetic Acid USP or Sodium Hydroxide NF pH: 7.4 (7.0–7.8) Calculated Osmolarity: 295 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 141; Potassium 5Magnesium 3; Chloride 98; 0.5 mmole P/literPhosphate (HPO) 1; Acetate (CH3COO–) 27 Gluconate (HOCH2(CHOH)4COO–) 23. Isolyte® S pH 7.4 is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container."
},
{
"NDCCode": "0264-9872-00",
"PackageDescription": "12 CONTAINER in 1 CASE (0264-9872-00) / 1000 mL in 1 CONTAINER",
"NDC11Code": "00264-9872-00",
"ProductNDC": "0264-9872",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Sodium Chloride",
"NonProprietaryName": "Heparin Sodium In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920720",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019953",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231215",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 0.9% Sodium Chloride Injection at the concentration of 2 USP units/mL is indicated as an anticoagulant to maintain catheter patency.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino-alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2-deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.9% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.9% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each 100 mL contains 200 USP Units Heparin Sodium, 0.43 g Dibasic Sodium Phosphate7H2O USP and 0.037 g Citric Acid Anhydrous USP as a buffer system, 0.9 g Sodium Chloride USP, and Water for Injection USP qs. pH: 7.0 (6.8-7.2); Calculated Osmolarity: 360 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 186; Chloride 154; Phosphate (HPO) 32; Citrate 6. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-9872-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-9872-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-9872-10",
"ProductNDC": "0264-9872",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Sodium Chloride",
"NonProprietaryName": "Heparin Sodium In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920720",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019953",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920720",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 0.9% Sodium Chloride Injection at the concentration of 2 USP units/mL is indicated as an anticoagulant to maintain catheter patency.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino-alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2-deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.9% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.9% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each 100 mL contains 200 USP Units Heparin Sodium, 0.43 g Dibasic Sodium Phosphate7H2O USP and 0.037 g Citric Acid Anhydrous USP as a buffer system, 0.9 g Sodium Chloride USP, and Water for Injection USP qs. pH: 7.0 (6.8-7.2); Calculated Osmolarity: 360 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 186; Chloride 154; Phosphate (HPO) 32; Citrate 6. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "10019-037-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 PACKAGE (10019-037-25) > 20 mL in 1 VIAL, SINGLE-DOSE (10019-037-20)",
"NDC11Code": "10019-0037-25",
"ProductNDC": "10019-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA019101",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
},
{
"NDCCode": "10019-037-27",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 PACKAGE (10019-037-27) > 2 mL in 1 VIAL, SINGLE-DOSE (10019-037-02)",
"NDC11Code": "10019-0037-27",
"ProductNDC": "10019-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA019101",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
},
{
"NDCCode": "10019-037-30",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 PACKAGE (10019-037-30) > 5 mL in 1 VIAL, SINGLE-DOSE (10019-037-05)",
"NDC11Code": "10019-0037-30",
"ProductNDC": "10019-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA019101",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69097-037-81</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE (69097-037-81) </PackageDescription>
<NDC11Code>69097-0037-81</NDC11Code>
<ProductNDC>69097-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pomalidomide</ProprietaryName>
<NonProprietaryName>Pomalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219718</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>POMALIDOMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).</IndicationAndUsage>
<Description>Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69097-037-07</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (69097-037-07) </PackageDescription>
<NDC11Code>69097-0037-07</NDC11Code>
<ProductNDC>69097-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pomalidomide</ProprietaryName>
<NonProprietaryName>Pomalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219718</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>POMALIDOMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).</IndicationAndUsage>
<Description>Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65954-037-81</NDCCode>
<PackageDescription>130 g in 1 BOTTLE (65954-037-81) </PackageDescription>
<NDC11Code>65954-0037-81</NDC11Code>
<ProductNDC>65954-037</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Colgate Kids</ProprietaryName>
<ProprietaryNameSuffix>2in1 Strawberry</ProprietaryNameSuffix>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>GEL, DENTIFRICE</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20110726</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part355</ApplicationNumber>
<LabelerName>Mission Hills S.A de C.V</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>1.1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-12-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>73069-037-81</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BOX (73069-037-81) > 100 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>73069-0037-81</NDC11Code>
<ProductNDC>73069-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Viatrexx-articula</ProprietaryName>
<NonProprietaryName>Anti-interleukin 1, Ankle Articulations, Beta Endorphin, Bfgf, Calcaneal Tendon, Hip Articulation, Knee Articulation, Liver, Transforming Growth Factor-1, Transforming Gf-beta</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>VIATREXX BIO INCORPORATED</LabelerName>
<SubstanceName>ANTI-INTERLEUKIN-1.ALPHA. IMMUNOGLOBULIN G RABBIT; BOS TAURUS ANKLE JOINT; SUS SCROFA ANKLE JOINT; METENKEFALIN; ERSOFERMIN; BOS TAURUS ACHILLES TENDON; SUS SCROFA ACHILLES TENDON; BOS TAURUS HIP JOINT; SUS SCROFA HIP JOINT; BOS TAURUS KNEE JOINT; SUS SCROFA KNEE JOINT; BEEF LIVER; PORK LIVER; TRANSFORMING GROWTH FACTOR BETA-1; AVOTERMIN</SubstanceName>
<StrengthNumber>201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 31; 31</StrengthNumber>
<StrengthUnit>[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69097-036-81</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE (69097-036-81) </PackageDescription>
<NDC11Code>69097-0036-81</NDC11Code>
<ProductNDC>69097-036</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pomalidomide</ProprietaryName>
<NonProprietaryName>Pomalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219718</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>POMALIDOMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).</IndicationAndUsage>
<Description>Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69097-038-81</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE (69097-038-81) </PackageDescription>
<NDC11Code>69097-0038-81</NDC11Code>
<ProductNDC>69097-038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pomalidomide</ProprietaryName>
<NonProprietaryName>Pomalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219718</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>POMALIDOMIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).</IndicationAndUsage>
<Description>Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69097-039-81</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE (69097-039-81) </PackageDescription>
<NDC11Code>69097-0039-81</NDC11Code>
<ProductNDC>69097-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pomalidomide</ProprietaryName>
<NonProprietaryName>Pomalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219718</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>POMALIDOMIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pomalidomide is a thalidomide analogue indicated, for the treatment of adult patients: : 1 in combination with dexamethasone, for patients with multiple myeloma (MM) who have received at least two prior therapies including lenalidomide and a proteasome inhibitor and have demonstrated disease progression on or within 60 days of completion of the last therapy (1.1)., 2 with AIDS-related Kaposi sarcoma (KS) after failure of highly active antiretroviral therapy (HAART) or in patients with KS who are HIV negative. This indication is approved under accelerated approval based on overall response rate. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s) (1.2).</IndicationAndUsage>
<Description>Pomalidomide is a thalidomide analog. The chemical name is (RS)-4-Amino-2-(2,6-dioxo-piperidin-3-yl)-isoindoline-1,3-dione and it has the following chemical structure:. The empirical formula for pomalidomide is C13H11N3O4 and the gram molecular weight is 273.24. Pomalidomide is a yellow to dark yellow powder. It has limited to low solubility into organic solvents and is practically insoluble in all pH solutions (about 0.01 mg/mL). Pomalidomide has a chiral carbon atom which exists as a racemic mixture of the R(+) and S(-) enantiomers. Pomalidomide capsule is available in 1-mg, 2-mg, 3-mg, and 4-mg capsules for oral administration. Each capsule contains pomalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, maltodextrin, pregelatinized starch, and sodium stearyl fumarate. The 1-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, and black ink. The 2-mg capsule shell contains gelatin, titanium dioxide, iron oxide yellow, iron oxide red, and black ink. The 3-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, iron oxide yellow, black ink, and white ink. The 4-mg capsule shell contains gelatin, titanium dioxide, FD&C blue 2, black ink, and white ink. Black ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac. White ink contains potassium hydroxide, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69097-287-81</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (69097-287-81) </PackageDescription>
<NDC11Code>69097-0287-81</NDC11Code>
<ProductNDC>69097-287</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076890</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69097-383-81</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE, PLASTIC (69097-383-81) </PackageDescription>
<NDC11Code>69097-0383-81</NDC11Code>
<ProductNDC>69097-383</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220906</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210435</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1)., 3 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2)., 4 Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib (1.3)., 5 Previously treated follicular lymphoma (FL), in combination with a rituximab product (1.4)., 6 Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product (1.5).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and with relative molecular mass 259.27. Lenalidomide is an off-white to pale-yellow solid powder. It is freely soluble in dimethyl formamide and practically insoluble in water, diethyl ether, ethanol, and buffered aqueous solvents. Solubility was significantly lower in buffers, ranging from ranging from 1.2 to 6.8 as 0.01g in 100 mL. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, yellow iron oxide, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 15 mg capsule shell contains gelatin, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 20 mg capsule shell contains gelatin, yellow iron oxide, FD&C Blue # 2, titanium dioxide, and black ink. The imprinting ink for 5 mg, 10 mg, 15 mg and 25 mg contains black iron oxide, potassium hydroxide, propylene glycol, purified water, and shellac. The imprinting ink for 20 mg contains black iron oxide, D & C yellow # 10, FD & C blue # 1, FD & C blue # 2, FD & C red # 40, and propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>69097-384-81</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE (69097-384-81) </PackageDescription>
<NDC11Code>69097-0384-81</NDC11Code>
<ProductNDC>69097-384</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210435</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1)., 3 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2)., 4 Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib (1.3)., 5 Previously treated follicular lymphoma (FL), in combination with a rituximab product (1.4)., 6 Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product (1.5).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and with relative molecular mass 259.27. Lenalidomide is an off-white to pale-yellow solid powder. It is freely soluble in dimethyl formamide and practically insoluble in water, diethyl ether, ethanol, and buffered aqueous solvents. Solubility was significantly lower in buffers, ranging from ranging from 1.2 to 6.8 as 0.01g in 100 mL. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, yellow iron oxide, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 15 mg capsule shell contains gelatin, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 20 mg capsule shell contains gelatin, yellow iron oxide, FD&C Blue # 2, titanium dioxide, and black ink. The imprinting ink for 5 mg, 10 mg, 15 mg and 25 mg contains black iron oxide, potassium hydroxide, propylene glycol, purified water, and shellac. The imprinting ink for 20 mg contains black iron oxide, D & C yellow # 10, FD & C blue # 1, FD & C blue # 2, FD & C red # 40, and propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>69097-385-81</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE, PLASTIC (69097-385-81) </PackageDescription>
<NDC11Code>69097-0385-81</NDC11Code>
<ProductNDC>69097-385</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220906</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210435</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) (1.1)., 3 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2)., 4 Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib (1.3)., 5 Previously treated follicular lymphoma (FL), in combination with a rituximab product (1.4)., 6 Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product (1.5).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C13H13N3O3, and with relative molecular mass 259.27. Lenalidomide is an off-white to pale-yellow solid powder. It is freely soluble in dimethyl formamide and practically insoluble in water, diethyl ether, ethanol, and buffered aqueous solvents. Solubility was significantly lower in buffers, ranging from ranging from 1.2 to 6.8 as 0.01g in 100 mL. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsules are available in 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: lactose anhydrous, microcrystalline cellulose, croscarmellose sodium, and magnesium stearate. The 5 mg and 25 mg capsule shell contains gelatin, titanium dioxide and black ink. The 10 mg capsule shell contains gelatin, yellow iron oxide, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 15 mg capsule shell contains gelatin, indigotine FD&C Blue # 2, titanium dioxide, and black ink. The 20 mg capsule shell contains gelatin, yellow iron oxide, FD&C Blue # 2, titanium dioxide, and black ink. The imprinting ink for 5 mg, 10 mg, 15 mg and 25 mg contains black iron oxide, potassium hydroxide, propylene glycol, purified water, and shellac. The imprinting ink for 20 mg contains black iron oxide, D & C yellow # 10, FD & C blue # 1, FD & C blue # 2, FD & C red # 40, and propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>62485-037-15</NDCCode>
<PackageDescription>150000 TABLET, COATED in 1 DRUM (62485-037-15) </PackageDescription>
<NDC11Code>62485-0037-15</NDC11Code>
<ProductNDC>62485-037</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<StartMarketingDate>20210125</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>TCB USA Corporation</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>25-JAN-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>72090-037-01</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (72090-037-01) </PackageDescription>
<NDC11Code>72090-0037-01</NDC11Code>
<ProductNDC>72090-037</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gencare-aspirin Low Dose Pain Reliever (nsaid)</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241107</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Pioneer Life Sciences, LLC</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> for the temporary relief of minor aches and pains or as recommended by your doctor. Because of its delayed action, this product will not provide fast relief of headaches or other symptoms needing immediate relief. ask your doctor about other uses for Safety Coated 81 mg Aspirin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69097-661-03</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (69097-661-03) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>69097-0661-03</NDC11Code>
<ProductNDC>69097-661</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20260727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213087</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>250; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>69097-662-03</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (69097-662-03) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>69097-0662-03</NDC11Code>
<ProductNDC>69097-662</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20260727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213087</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>69097-663-03</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (69097-663-03) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>69097-0663-03</NDC11Code>
<ProductNDC>69097-663</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20260727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213087</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>500; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>69097-686-34</NDCCode>
<PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (69097-686-34) / 4 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
<NDC11Code>69097-0686-34</NDC11Code>
<ProductNDC>69097-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tavaborole</ProprietaryName>
<NonProprietaryName>Tavaborole</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212224</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>TAVABOROLE</SubstanceName>
<StrengthNumber>43.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Boron Compounds [CS], Oxaborole Antifungal [EPC], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tavaborole topical solution, 5% is an oxaborole antifungal indicated for the treatment of onychomycosis of the toenails due to Trichophyton rubrum or Trichophyton mentagrophytes.</IndicationAndUsage>
<Description>Tavaborole topical solution, 5% contains tavaborole, 5% (w/w) in a clear, colorless alcohol-based solution for topical use. The active ingredient, tavaborole, is an oxaborole antifungal with the chemical name of 5-fluoro-1,3-dihydro-1-hydroxy-2,1-benzoxaborole. The chemical formula is C7H6BFO2, the molecular weight is 151.93 and the structural formula is. Tavaborole is a white to off-white powder. It is slightly soluble in water and freely soluble in ethanol and propylene glycol. Each mL of tavaborole topical solution contains 43.5 mg of tavaborole. Inactive ingredients include alcohol 74.81 % (v/v), edetate calcium disodium, and propylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>69097-686-37</NDCCode>
<PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (69097-686-37) / 10 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
<NDC11Code>69097-0686-37</NDC11Code>
<ProductNDC>69097-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tavaborole</ProprietaryName>
<NonProprietaryName>Tavaborole</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212224</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>TAVABOROLE</SubstanceName>
<StrengthNumber>43.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Boron Compounds [CS], Oxaborole Antifungal [EPC], Protein Synthesis Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tavaborole topical solution, 5% is an oxaborole antifungal indicated for the treatment of onychomycosis of the toenails due to Trichophyton rubrum or Trichophyton mentagrophytes.</IndicationAndUsage>
<Description>Tavaborole topical solution, 5% contains tavaborole, 5% (w/w) in a clear, colorless alcohol-based solution for topical use. The active ingredient, tavaborole, is an oxaborole antifungal with the chemical name of 5-fluoro-1,3-dihydro-1-hydroxy-2,1-benzoxaborole. The chemical formula is C7H6BFO2, the molecular weight is 151.93 and the structural formula is. Tavaborole is a white to off-white powder. It is slightly soluble in water and freely soluble in ethanol and propylene glycol. Each mL of tavaborole topical solution contains 43.5 mg of tavaborole. Inactive ingredients include alcohol 74.81 % (v/v), edetate calcium disodium, and propylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>0264-2205-00</NDCCode>
<PackageDescription>16 CONTAINER in 1 CASE (0264-2205-00) / 1000 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-2205-00</NDC11Code>
<ProductNDC>0264-2205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Physiolyte</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, And Magnesium Chloride</NonProprietaryName>
<DosageFormName>IRRIGANT</DosageFormName>
<RouteName>IRRIGATION</RouteName>
<StartMarketingDate>19840608</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019024</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>.53; .5; .37; .037; .03</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19840608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Physiolyte (A Physiological Irrigating Solution) is indicated for all general irrigation, washing, and rinsing purposes which permit use of a sterile, nonpyrogenic electrolyte solution.</IndicationAndUsage>
<Description>Physiolyte is a sterile, nonpyrogenic solution of electrolytes in water for injection intended only for sterile irrigation, washing, and rinsing purposes. Each 100 mL contains:Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium ChlorideUSP 0.037 g; Magnesium Chloride Hexahydrate USP 0.03 gWater for Injection USP qsGlacial Acetic Acid USP has been added to adjust the pH. pH: 6.8 (6.3–7.3)Calculated Osmolarity: The solution is isotonic (295 mOsmol/liter). Concentration of Electrolytes (mEq/liter): Sodium 140Potassium 5; Magnesium 3; Chloride 98; Acetate (CH3COO−) 27Gluconate (HOCH2(CHOH)4COO−) 23. It contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single-dose or short procedure irrigation. When smaller volumes are required the unused portion should be discarded. Physiolyte may be classified as a sterile irrigant, wash, rinse and pharmaceutical vehicle. The formulas of the active ingredients are. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. Not made with natural rubber latex, PVC or DEHP.</Description>
</NDC>
<NDC>
<NDCCode>0264-3301-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3301-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3301-10</NDC11Code>
<ProductNDC>0264-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Heparin Sodium In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250718</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019953</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-3462-20</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3462-20) / 250 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3462-20</NDC11Code>
<ProductNDC>0264-3462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Heparin Sodium In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250718</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019953</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-7703-00</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-7703-00) > 1000 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7703-00</NDC11Code>
<ProductNDC>0264-7703</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isolyte S</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, And Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19890929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019711</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>.53; .5; .37; .037; .03</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This solution is indicated for use in adults and pediatric patients as a source of electrolytes and water for hydration, and as an alkalinizing agent.</IndicationAndUsage>
<Description>Each 100 mL of Isolyte® S (Multi-Electrolyte Injection) contains:Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 gMagnesium Chloride Hexahydrate USP 0.03 gWater for Injection USP qs. pH adjusted with Glacial Acetic Acid USPpH: 6.7 (6.3–7.3)Calculated Osmolarity: 295 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 140; Potassium 5Magnesium 3; Chloride 98; Acetate (CH3COO−) 27Gluconate (HOCH2(CHOH)4COO−) 23. Isolyte® S is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7704-00</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-7704-00) > 1000 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7704-00</NDC11Code>
<ProductNDC>0264-7704</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isolyte S In Dextrose</ProprietaryName>
<NonProprietaryName>Hydrous Dextrose, Sodium Chloride, Sodium Gluconate, Sodium Acetate Trihydrate, Potassium Chloride And Magnesium Chloride Hexahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19930809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA019843</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE; SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; .53; .5; .37; .037; .03</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-13</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0264-7707-00</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-7707-00) / 1000 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7707-00</NDC11Code>
<ProductNDC>0264-7707</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isolyte S Ph 7.4</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, Magnesium Chloride, Sodium Phosphate, Dibasic, And Potassium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19890929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019696</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; SODIUM PHOSPHATE, DIBASIC; POTASSIUM PHOSPHATE, MONOBASIC</SubstanceName>
<StrengthNumber>.53; .5; .37; .037; .03; .012; .00082</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This solution is indicated for use in adults as a source of electrolytes and water for hydration, and as an alkalinizing agent.</IndicationAndUsage>
<Description>Each 100 mL of Isolyte® S pH 7.4 (Multi-Electrolyte Injection) contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 gMagnesium Chloride Hexahydrate USP 0.03 g Dibasic Sodium Phosphate Heptahydrate USP 0.012 g Monobasic Potassium Phosphate NF 0.00082 g; Water for Injection USP qs pH may be adjusted with Glacial Acetic Acid USP or Sodium Hydroxide NF pH: 7.4 (7.0–7.8) Calculated Osmolarity: 295 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 141; Potassium 5Magnesium 3; Chloride 98; 0.5 mmole P/literPhosphate (HPO) 1; Acetate (CH3COO–) 27 Gluconate (HOCH2(CHOH)4COO–) 23. Isolyte® S pH 7.4 is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-7707-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-7707-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-7707-10</NDC11Code>
<ProductNDC>0264-7707</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isolyte S Ph 7.4</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Gluconate, Sodium Acetate, Potassium Chloride, Magnesium Chloride, Sodium Phosphate, Dibasic, And Potassium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19890929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019696</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM GLUCONATE; SODIUM ACETATE; POTASSIUM CHLORIDE; MAGNESIUM CHLORIDE; SODIUM PHOSPHATE, DIBASIC; POTASSIUM PHOSPHATE, MONOBASIC</SubstanceName>
<StrengthNumber>.53; .5; .37; .037; .03; .012; .00082</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This solution is indicated for use in adults as a source of electrolytes and water for hydration, and as an alkalinizing agent.</IndicationAndUsage>
<Description>Each 100 mL of Isolyte® S pH 7.4 (Multi-Electrolyte Injection) contains: Sodium Chloride USP 0.53 g; Sodium Gluconate USP 0.5 gSodium Acetate Trihydrate USP 0.37 g; Potassium Chloride USP 0.037 gMagnesium Chloride Hexahydrate USP 0.03 g Dibasic Sodium Phosphate Heptahydrate USP 0.012 g Monobasic Potassium Phosphate NF 0.00082 g; Water for Injection USP qs pH may be adjusted with Glacial Acetic Acid USP or Sodium Hydroxide NF pH: 7.4 (7.0–7.8) Calculated Osmolarity: 295 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 141; Potassium 5Magnesium 3; Chloride 98; 0.5 mmole P/literPhosphate (HPO) 1; Acetate (CH3COO–) 27 Gluconate (HOCH2(CHOH)4COO–) 23. Isolyte® S pH 7.4 is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formulas of the active ingredients are. Not made with natural rubber latex, PVC or DEHP. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. Addition of medication should be accomplished using complete aseptic technique. The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.</Description>
</NDC>
<NDC>
<NDCCode>0264-9872-00</NDCCode>
<PackageDescription>12 CONTAINER in 1 CASE (0264-9872-00) / 1000 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-9872-00</NDC11Code>
<ProductNDC>0264-9872</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Heparin Sodium In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920720</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019953</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 0.9% Sodium Chloride Injection at the concentration of 2 USP units/mL is indicated as an anticoagulant to maintain catheter patency.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino-alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2-deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.9% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.9% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each 100 mL contains 200 USP Units Heparin Sodium, 0.43 g Dibasic Sodium Phosphate7H2O USP and 0.037 g Citric Acid Anhydrous USP as a buffer system, 0.9 g Sodium Chloride USP, and Water for Injection USP qs. pH: 7.0 (6.8-7.2); Calculated Osmolarity: 360 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 186; Chloride 154; Phosphate (HPO) 32; Citrate 6. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-9872-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-9872-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-9872-10</NDC11Code>
<ProductNDC>0264-9872</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Heparin Sodium In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920720</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019953</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 0.9% Sodium Chloride Injection at the concentration of 2 USP units/mL is indicated as an anticoagulant to maintain catheter patency.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino-alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2-deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.9% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.9% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Each 100 mL contains 200 USP Units Heparin Sodium, 0.43 g Dibasic Sodium Phosphate7H2O USP and 0.037 g Citric Acid Anhydrous USP as a buffer system, 0.9 g Sodium Chloride USP, and Water for Injection USP qs. pH: 7.0 (6.8-7.2); Calculated Osmolarity: 360 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 186; Chloride 154; Phosphate (HPO) 32; Citrate 6. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>10019-037-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 PACKAGE (10019-037-25) > 20 mL in 1 VIAL, SINGLE-DOSE (10019-037-20)</PackageDescription>
<NDC11Code>10019-0037-25</NDC11Code>
<ProductNDC>10019-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA019101</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>10019-037-27</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 PACKAGE (10019-037-27) > 2 mL in 1 VIAL, SINGLE-DOSE (10019-037-02)</PackageDescription>
<NDC11Code>10019-0037-27</NDC11Code>
<ProductNDC>10019-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA019101</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>10019-037-30</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 PACKAGE (10019-037-30) > 5 mL in 1 VIAL, SINGLE-DOSE (10019-037-05)</PackageDescription>
<NDC11Code>10019-0037-30</NDC11Code>
<ProductNDC>10019-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA019101</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
</NDCList>