RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>69097-055-97</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (69097-055-97)  / 50 mL in 1 VIAL (69097-055-67) </PackageDescription>
    <NDC11Code>69097-0055-97</NDC11Code>
    <ProductNDC>69097-055</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphates</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217892</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
    <Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>33261-055-97</NDCCode>
    <PackageDescription>126 TABLET in 1 BOTTLE, PLASTIC (33261-055-97) </PackageDescription>
    <NDC11Code>33261-0055-97</NDC11Code>
    <ProductNDC>33261-055</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
    <NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20060119</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040656</ApplicationNumber>
    <LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
    <SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>7.5; 325</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>69097-077-97</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (69097-077-97)  / 15 mL in 1 VIAL (69097-077-67) </PackageDescription>
    <NDC11Code>69097-0077-97</NDC11Code>
    <ProductNDC>69097-077</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphates</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217892</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
    <Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-078-97</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (69097-078-97)  / 5 mL in 1 VIAL (69097-078-67) </PackageDescription>
    <NDC11Code>69097-0078-97</NDC11Code>
    <ProductNDC>69097-078</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Phosphates</ProprietaryName>
    <NonProprietaryName>Potassium Phosphates</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217892</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>224; 236</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
    <Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-534-97</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (69097-534-97)  &gt; 1 mL in 1 VIAL, SINGLE-DOSE (69097-534-31) </PackageDescription>
    <NDC11Code>69097-0534-97</NDC11Code>
    <ProductNDC>69097-534</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180601</StartMarketingDate>
    <EndMarketingDate>20200930</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210334</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>alpha-1 Adrenergic Agonist [EPC],Adrenergic alpha1-Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20180601</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>61755-005-01</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (61755-005-01)  / .05 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>61755-0005-01</NDC11Code>
    <ProductNDC>61755-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eylea</ProprietaryName>
    <NonProprietaryName>Aflibercept</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVITREAL</RouteName>
    <StartMarketingDate>20111121</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125387</ApplicationNumber>
    <LabelerName>Regeneron Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>AFLIBERCEPT</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191209</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EYLEA is indicated for the treatment of.</IndicationAndUsage>
    <Description>Aflibercept is a recombinant fusion protein consisting of portions of human VEGF receptors 1 and 2 extracellular domains fused to the Fc portion of human IgG1 formulated as an iso-osmotic solution for intravitreal administration. Aflibercept is a dimeric glycoprotein with a protein molecular weight of 97 kilodaltons (kDa) and contains glycosylation, constituting an additional 15% of the total molecular mass, resulting in a total molecular weight of 115 kDa. Aflibercept is produced in recombinant Chinese hamster ovary (CHO) cells. EYLEA (aflibercept) Injection is a sterile, clear, and colorless to pale yellow solution. EYLEA does not contain anti-microbial preservative and is supplied as a sterile, aqueous solution for intravitreal injection in a single-dose pre-filled glass syringe or a single-dose glass vial designed to deliver 0.05 mL (50 microliters) of solution containing 2 mg of aflibercept in polysorbate 20 (0.015 mg), sodium chloride (0.117 mg), sodium phosphate monobasic monohydrate (0.055 mg), sodium phosphate dibasic heptahydrate (0.027 mg), sucrose (2.5 mg) and water for injection with a pH of 6.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>61755-005-02</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (61755-005-02)  / .05 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>61755-0005-02</NDC11Code>
    <ProductNDC>61755-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eylea</ProprietaryName>
    <NonProprietaryName>Aflibercept</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVITREAL</RouteName>
    <StartMarketingDate>20111121</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125387</ApplicationNumber>
    <LabelerName>Regeneron Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>AFLIBERCEPT</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111121</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EYLEA is indicated for the treatment of.</IndicationAndUsage>
    <Description>Aflibercept is a recombinant fusion protein consisting of portions of human VEGF receptors 1 and 2 extracellular domains fused to the Fc portion of human IgG1 formulated as an iso-osmotic solution for intravitreal administration. Aflibercept is a dimeric glycoprotein with a protein molecular weight of 97 kilodaltons (kDa) and contains glycosylation, constituting an additional 15% of the total molecular mass, resulting in a total molecular weight of 115 kDa. Aflibercept is produced in recombinant Chinese hamster ovary (CHO) cells. EYLEA (aflibercept) Injection is a sterile, clear, and colorless to pale yellow solution. EYLEA does not contain anti-microbial preservative and is supplied as a sterile, aqueous solution for intravitreal injection in a single-dose pre-filled glass syringe or a single-dose glass vial designed to deliver 0.05 mL (50 microliters) of solution containing 2 mg of aflibercept in polysorbate 20 (0.015 mg), sodium chloride (0.117 mg), sodium phosphate monobasic monohydrate (0.055 mg), sodium phosphate dibasic heptahydrate (0.027 mg), sucrose (2.5 mg) and water for injection with a pH of 6.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>61755-005-54</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (61755-005-54)  / .05 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>61755-0005-54</NDC11Code>
    <ProductNDC>61755-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eylea</ProprietaryName>
    <NonProprietaryName>Aflibercept</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVITREAL</RouteName>
    <StartMarketingDate>20111121</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125387</ApplicationNumber>
    <LabelerName>Regeneron Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>AFLIBERCEPT</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191209</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EYLEA is indicated for the treatment of.</IndicationAndUsage>
    <Description>Aflibercept is a recombinant fusion protein consisting of portions of human VEGF receptors 1 and 2 extracellular domains fused to the Fc portion of human IgG1 formulated as an iso-osmotic solution for intravitreal administration. Aflibercept is a dimeric glycoprotein with a protein molecular weight of 97 kilodaltons (kDa) and contains glycosylation, constituting an additional 15% of the total molecular mass, resulting in a total molecular weight of 115 kDa. Aflibercept is produced in recombinant Chinese hamster ovary (CHO) cells. EYLEA (aflibercept) Injection is a sterile, clear, and colorless to pale yellow solution. EYLEA does not contain anti-microbial preservative and is supplied as a sterile, aqueous solution for intravitreal injection in a single-dose pre-filled glass syringe or a single-dose glass vial designed to deliver 0.05 mL (50 microliters) of solution containing 2 mg of aflibercept in polysorbate 20 (0.015 mg), sodium chloride (0.117 mg), sodium phosphate monobasic monohydrate (0.055 mg), sodium phosphate dibasic heptahydrate (0.027 mg), sucrose (2.5 mg) and water for injection with a pH of 6.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>61755-005-55</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (61755-005-55)  / .05 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>61755-0005-55</NDC11Code>
    <ProductNDC>61755-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eylea</ProprietaryName>
    <NonProprietaryName>Aflibercept</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVITREAL</RouteName>
    <StartMarketingDate>20111121</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125387</ApplicationNumber>
    <LabelerName>Regeneron Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>AFLIBERCEPT</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EYLEA is indicated for the treatment of.</IndicationAndUsage>
    <Description>Aflibercept is a recombinant fusion protein consisting of portions of human VEGF receptors 1 and 2 extracellular domains fused to the Fc portion of human IgG1 formulated as an iso-osmotic solution for intravitreal administration. Aflibercept is a dimeric glycoprotein with a protein molecular weight of 97 kilodaltons (kDa) and contains glycosylation, constituting an additional 15% of the total molecular mass, resulting in a total molecular weight of 115 kDa. Aflibercept is produced in recombinant Chinese hamster ovary (CHO) cells. EYLEA (aflibercept) Injection is a sterile, clear, and colorless to pale yellow solution. EYLEA does not contain anti-microbial preservative and is supplied as a sterile, aqueous solution for intravitreal injection in a single-dose pre-filled glass syringe or a single-dose glass vial designed to deliver 0.05 mL (50 microliters) of solution containing 2 mg of aflibercept in polysorbate 20 (0.015 mg), sodium chloride (0.117 mg), sodium phosphate monobasic monohydrate (0.055 mg), sodium phosphate dibasic heptahydrate (0.027 mg), sucrose (2.5 mg) and water for injection with a pH of 6.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-788-05</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (69097-788-05) </PackageDescription>
    <NDC11Code>69097-0788-05</NDC11Code>
    <ProductNDC>69097-788</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-788-12</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (69097-788-12) </PackageDescription>
    <NDC11Code>69097-0788-12</NDC11Code>
    <ProductNDC>69097-788</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-789-05</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (69097-789-05) </PackageDescription>
    <NDC11Code>69097-0789-05</NDC11Code>
    <ProductNDC>69097-789</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-789-12</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (69097-789-12) </PackageDescription>
    <NDC11Code>69097-0789-12</NDC11Code>
    <ProductNDC>69097-789</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-791-05</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (69097-791-05) </PackageDescription>
    <NDC11Code>69097-0791-05</NDC11Code>
    <ProductNDC>69097-791</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-791-12</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (69097-791-12) </PackageDescription>
    <NDC11Code>69097-0791-12</NDC11Code>
    <ProductNDC>69097-791</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-792-05</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (69097-792-05) </PackageDescription>
    <NDC11Code>69097-0792-05</NDC11Code>
    <ProductNDC>69097-792</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-792-12</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (69097-792-12) </PackageDescription>
    <NDC11Code>69097-0792-12</NDC11Code>
    <ProductNDC>69097-792</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077987</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low- density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with:oPrimary dysbetalipoproteinemia.oHypertriglyceridemia.</IndicationAndUsage>
    <Description>Pravastatin Sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthaleneheptanoic acid, 1,2,6,7,8,8a-hexahydro-b,d,6-trihydroxy-2- methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is an odorless, white to off-white, fine or crystalline powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin Sodium Tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.48 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, magnesium oxide light, magnesium stearate, mannitol, microcrystalline cellulose and starch. The 10 mg, 20 mg and 80 mg tablets also contain D&amp;C yellow no. 10 aluminum lake and the 40 mg tablet also contains D&amp;C yellow no. 10 aluminum lake and FD&amp;C blue no. 1 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-912-02</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (69097-912-02) </PackageDescription>
    <NDC11Code>69097-0912-02</NDC11Code>
    <ProductNDC>69097-912</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Trospium Chloride</ProprietaryName>
    <NonProprietaryName>Trospium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160923</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091688</ApplicationNumber>
    <LabelerName>CIPLA USA INC.,</LabelerName>
    <SubstanceName>TROSPIUM CHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-09-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Trospium chloride tablets are a muscarinic antagonist indicated for the treatment of overactive bladder (OAB) with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
    <Description>Trospium chloride, USP is a quaternary ammonium compound with the chemical name of Spiro[8azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride, USP is C25H30ClNO3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below. Trospium chloride, USP is a fine, colorless to slightly yellow, crystalline solid. The compound’s solubility in water is approximately 1 g per 2 mL. Each trospium chloride tablet contains 20 mg of trospium chloride, USP a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, hypromellose 2910, titanium dioxide, polyethylene glycol 400, polysorbate 80, xylitol, sucralose, red iron oxide and yellow iron oxide. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-912-03</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (69097-912-03) </PackageDescription>
    <NDC11Code>69097-0912-03</NDC11Code>
    <ProductNDC>69097-912</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Trospium Chloride</ProprietaryName>
    <NonProprietaryName>Trospium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160923</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091688</ApplicationNumber>
    <LabelerName>CIPLA USA INC.,</LabelerName>
    <SubstanceName>TROSPIUM CHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-09-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Trospium chloride tablets are a muscarinic antagonist indicated for the treatment of overactive bladder (OAB) with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
    <Description>Trospium chloride, USP is a quaternary ammonium compound with the chemical name of Spiro[8azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride, USP is C25H30ClNO3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below. Trospium chloride, USP is a fine, colorless to slightly yellow, crystalline solid. The compound’s solubility in water is approximately 1 g per 2 mL. Each trospium chloride tablet contains 20 mg of trospium chloride, USP a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, hypromellose 2910, titanium dioxide, polyethylene glycol 400, polysorbate 80, xylitol, sucralose, red iron oxide and yellow iron oxide. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-912-15</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (69097-912-15) </PackageDescription>
    <NDC11Code>69097-0912-15</NDC11Code>
    <ProductNDC>69097-912</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Trospium Chloride</ProprietaryName>
    <NonProprietaryName>Trospium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160923</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091688</ApplicationNumber>
    <LabelerName>CIPLA USA INC.,</LabelerName>
    <SubstanceName>TROSPIUM CHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-09-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Trospium chloride tablets are a muscarinic antagonist indicated for the treatment of overactive bladder (OAB) with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
    <Description>Trospium chloride, USP is a quaternary ammonium compound with the chemical name of Spiro[8azoniabicyclo[3.2.1]octane-8,1'-pyrrolidinium], 3-[(hydroxydiphenylacetyl)oxy]-, chloride, (1α, 3β, 5α). The empirical formula of trospium chloride, USP is C25H30ClNO3 and its molecular weight is 427.97. The structural formula of trospium chloride is represented below. Trospium chloride, USP is a fine, colorless to slightly yellow, crystalline solid. The compound’s solubility in water is approximately 1 g per 2 mL. Each trospium chloride tablet contains 20 mg of trospium chloride, USP a muscarinic antagonist, for oral administration. Each tablet also contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, hypromellose 2910, titanium dioxide, polyethylene glycol 400, polysorbate 80, xylitol, sucralose, red iron oxide and yellow iron oxide. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0209-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0069-0209-10)  / 20 mL in 1 VIAL (0069-0209-01) </PackageDescription>
    <NDC11Code>00069-0209-10</NDC11Code>
    <ProductNDC>0069-0209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Propofol</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201005</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205576</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201005</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>Propofol Injectable Emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6-diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol, USP is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of Propofol Injectable Emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerin (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol Injectable Emulsion, USP is isotonic and has a pH of 6 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0234-20</NDCCode>
    <PackageDescription>20 VIAL in 1 CARTON (0069-0234-20)  / 50 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00069-0234-20</NDC11Code>
    <ProductNDC>0069-0234</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Propofol</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201005</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205576</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201005</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>Propofol Injectable Emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6-diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol, USP is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of Propofol Injectable Emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerin (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol Injectable Emulsion, USP is isotonic and has a pH of 6 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0248-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (0069-0248-10)  / 100 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00069-0248-10</NDC11Code>
    <ProductNDC>0069-0248</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Propofol</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201005</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205576</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201005</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>Propofol Injectable Emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6-diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol, USP is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of Propofol Injectable Emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerin (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol Injectable Emulsion, USP is isotonic and has a pH of 6 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-4147-56</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (0093-4147-56)  &gt; 1 VIAL, SINGLE-DOSE in 1 POUCH (0093-4147-19)  &gt; .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00093-4147-56</NDC11Code>
    <ProductNDC>0093-4147</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levalbuterol</ProprietaryName>
    <NonProprietaryName>Levalbuterol</NonProprietaryName>
    <DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20141216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200875</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1.25</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levalbuterol inhalation solution (concentrate) is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
    <Description>Levalbuterol Inhalation Solution USP (Concentrate) is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol hydrochloride, USP is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol hydrochloride, USP is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol hydrochloride, USP is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 188°C and is soluble in water and slightly soluble in ethanol. Levalbuterol hydrochloride, USP is the USAN modified name for (R)-albuterol hydrochloride in the United States. Levalbuterol Inhalation Solution USP (Concentrate) is supplied in 0.5 mL unit-dose vials that must be diluted with normal saline before administration by nebulization. Each 0.5 mL unit-dose vial contains 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol hydrochloride, USP), 4 mg sodium chloride to adjust tonicity, and 0.055 mg edetate sodium dihydrate, 1 mg of trisodium citrate dihydrate, and sulfuric acid to adjust pH to 4.0 (3.3 to 4.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-7810-01</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (0169-7810-01)  *  4 mL in 1 VIAL, GLASS (0169-7811-11)  *  4 mL in 1 SYRINGE, GLASS (0169-7008-98) </PackageDescription>
    <NDC11Code>00169-7810-01</NDC11Code>
    <ProductNDC>0169-7810</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Novoeight</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Recombinant</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125466</ApplicationNumber>
    <LabelerName>Novo Nordisk</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Novoeight, Antihemophilic Factor (Recombinant), is a human antihemophilic factor (human blood coagulation. factor VIII (FVIII)) indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes , 2 Perioperative management , 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
    <Description>Novoeight is formulated as a sterile, non-pyrogenic, lyophilized powder for intravenous injection after reconstitution with the diluent (0.9% sodium chloride). Novoeight is available in single-dose vials that contain nominally 250, 500, 1000, 1500, 2000 or 3000 international units (IU) per vial. When reconstituted with the appropriate volume of diluent, the product contains the following components per mL: 18 mg sodium chloride, 1.5 mg L-histidine, 3 mg sucrose, 0.1 mg polysorbate 80, 0.055 mg L-methionine and 0.25 mg calcium chloride dihydrate. The product contains no preservative. Each vial of Novoeight is labeled with the actual rFVIII activity expressed in IU determined by the one-stage clotting assay, using a reference material calibrated against a World Health Organization (WHO) International Standard for FVIII Concentrates. One IU, as defined by the WHO standard for human FVIII, is approximately equal to the level of FVIII activity in 1 mL of fresh pooled human plasma. The specific activity of Novoeight is approximately 8340 IU per milligram of protein. The active ingredient in Novoeight is a recombinant (r) analogue of human coagulation factor VIII (FVIII) with a molecular mass of 166 kDa, calculated excluding post-translational modifications. The rFVIII molecule in Novoeight is a glycoprotein containing a heavy chain and a light chain, with 21 of the 908 amino acids of the B-domain of endogenous FVIII connected to the C-terminus of the heavy chain. Once activated, the resulting rFVIIIa has a comparable structure to the endogenous FVIIIa. Novoeight is synthesized by a genetically engineered Chinese hamster ovary (CHO) cell line which secretes rFVIII into the cell culture medium. The rFVIII protein is purified using a series of chromatography steps, one of which is the use of an immunoaffinity column in which a monoclonal antibody, produced in CHO cells and directed against FVIII, is employed to selectively isolate the rFVIII from the medium. The production process includes two dedicated viral clearance steps - a detergent treatment step for inactivation and a 20-nm filtration step for removal of viruses. No additives of human or animal origin are used in the cell culture, purification and formulation of Novoeight.</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-7815-01</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (0169-7815-01)  *  4 mL in 1 VIAL, GLASS (0169-7855-11)  *  4 mL in 1 SYRINGE, GLASS (0169-7008-98) </PackageDescription>
    <NDC11Code>00169-7815-01</NDC11Code>
    <ProductNDC>0169-7815</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Novoeight</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Recombinant</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125466</ApplicationNumber>
    <LabelerName>Novo Nordisk</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Novoeight, Antihemophilic Factor (Recombinant), is a human antihemophilic factor (human blood coagulation. factor VIII (FVIII)) indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes , 2 Perioperative management , 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
    <Description>Novoeight is formulated as a sterile, non-pyrogenic, lyophilized powder for intravenous injection after reconstitution with the diluent (0.9% sodium chloride). Novoeight is available in single-dose vials that contain nominally 250, 500, 1000, 1500, 2000 or 3000 international units (IU) per vial. When reconstituted with the appropriate volume of diluent, the product contains the following components per mL: 18 mg sodium chloride, 1.5 mg L-histidine, 3 mg sucrose, 0.1 mg polysorbate 80, 0.055 mg L-methionine and 0.25 mg calcium chloride dihydrate. The product contains no preservative. Each vial of Novoeight is labeled with the actual rFVIII activity expressed in IU determined by the one-stage clotting assay, using a reference material calibrated against a World Health Organization (WHO) International Standard for FVIII Concentrates. One IU, as defined by the WHO standard for human FVIII, is approximately equal to the level of FVIII activity in 1 mL of fresh pooled human plasma. The specific activity of Novoeight is approximately 8340 IU per milligram of protein. The active ingredient in Novoeight is a recombinant (r) analogue of human coagulation factor VIII (FVIII) with a molecular mass of 166 kDa, calculated excluding post-translational modifications. The rFVIII molecule in Novoeight is a glycoprotein containing a heavy chain and a light chain, with 21 of the 908 amino acids of the B-domain of endogenous FVIII connected to the C-terminus of the heavy chain. Once activated, the resulting rFVIIIa has a comparable structure to the endogenous FVIIIa. Novoeight is synthesized by a genetically engineered Chinese hamster ovary (CHO) cell line which secretes rFVIII into the cell culture medium. The rFVIII protein is purified using a series of chromatography steps, one of which is the use of an immunoaffinity column in which a monoclonal antibody, produced in CHO cells and directed against FVIII, is employed to selectively isolate the rFVIII from the medium. The production process includes two dedicated viral clearance steps - a detergent treatment step for inactivation and a 20-nm filtration step for removal of viruses. No additives of human or animal origin are used in the cell culture, purification and formulation of Novoeight.</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-7820-01</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (0169-7820-01)  *  4 mL in 1 VIAL, GLASS (0169-7821-11)  *  4 mL in 1 SYRINGE, GLASS (0169-7008-98) </PackageDescription>
    <NDC11Code>00169-7820-01</NDC11Code>
    <ProductNDC>0169-7820</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Novoeight</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Recombinant</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125466</ApplicationNumber>
    <LabelerName>Novo Nordisk</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Novoeight, Antihemophilic Factor (Recombinant), is a human antihemophilic factor (human blood coagulation. factor VIII (FVIII)) indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes , 2 Perioperative management , 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
    <Description>Novoeight is formulated as a sterile, non-pyrogenic, lyophilized powder for intravenous injection after reconstitution with the diluent (0.9% sodium chloride). Novoeight is available in single-dose vials that contain nominally 250, 500, 1000, 1500, 2000 or 3000 international units (IU) per vial. When reconstituted with the appropriate volume of diluent, the product contains the following components per mL: 18 mg sodium chloride, 1.5 mg L-histidine, 3 mg sucrose, 0.1 mg polysorbate 80, 0.055 mg L-methionine and 0.25 mg calcium chloride dihydrate. The product contains no preservative. Each vial of Novoeight is labeled with the actual rFVIII activity expressed in IU determined by the one-stage clotting assay, using a reference material calibrated against a World Health Organization (WHO) International Standard for FVIII Concentrates. One IU, as defined by the WHO standard for human FVIII, is approximately equal to the level of FVIII activity in 1 mL of fresh pooled human plasma. The specific activity of Novoeight is approximately 8340 IU per milligram of protein. The active ingredient in Novoeight is a recombinant (r) analogue of human coagulation factor VIII (FVIII) with a molecular mass of 166 kDa, calculated excluding post-translational modifications. The rFVIII molecule in Novoeight is a glycoprotein containing a heavy chain and a light chain, with 21 of the 908 amino acids of the B-domain of endogenous FVIII connected to the C-terminus of the heavy chain. Once activated, the resulting rFVIIIa has a comparable structure to the endogenous FVIIIa. Novoeight is synthesized by a genetically engineered Chinese hamster ovary (CHO) cell line which secretes rFVIII into the cell culture medium. The rFVIII protein is purified using a series of chromatography steps, one of which is the use of an immunoaffinity column in which a monoclonal antibody, produced in CHO cells and directed against FVIII, is employed to selectively isolate the rFVIII from the medium. The production process includes two dedicated viral clearance steps - a detergent treatment step for inactivation and a 20-nm filtration step for removal of viruses. No additives of human or animal origin are used in the cell culture, purification and formulation of Novoeight.</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-7825-01</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (0169-7825-01)  *  4 mL in 1 VIAL, GLASS (0169-7829-11)  *  4 mL in 1 SYRINGE, GLASS (0169-7008-98) </PackageDescription>
    <NDC11Code>00169-7825-01</NDC11Code>
    <ProductNDC>0169-7825</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Novoeight</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Recombinant</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125466</ApplicationNumber>
    <LabelerName>Novo Nordisk</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Novoeight, Antihemophilic Factor (Recombinant), is a human antihemophilic factor (human blood coagulation. factor VIII (FVIII)) indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes , 2 Perioperative management , 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
    <Description>Novoeight is formulated as a sterile, non-pyrogenic, lyophilized powder for intravenous injection after reconstitution with the diluent (0.9% sodium chloride). Novoeight is available in single-dose vials that contain nominally 250, 500, 1000, 1500, 2000 or 3000 international units (IU) per vial. When reconstituted with the appropriate volume of diluent, the product contains the following components per mL: 18 mg sodium chloride, 1.5 mg L-histidine, 3 mg sucrose, 0.1 mg polysorbate 80, 0.055 mg L-methionine and 0.25 mg calcium chloride dihydrate. The product contains no preservative. Each vial of Novoeight is labeled with the actual rFVIII activity expressed in IU determined by the one-stage clotting assay, using a reference material calibrated against a World Health Organization (WHO) International Standard for FVIII Concentrates. One IU, as defined by the WHO standard for human FVIII, is approximately equal to the level of FVIII activity in 1 mL of fresh pooled human plasma. The specific activity of Novoeight is approximately 8340 IU per milligram of protein. The active ingredient in Novoeight is a recombinant (r) analogue of human coagulation factor VIII (FVIII) with a molecular mass of 166 kDa, calculated excluding post-translational modifications. The rFVIII molecule in Novoeight is a glycoprotein containing a heavy chain and a light chain, with 21 of the 908 amino acids of the B-domain of endogenous FVIII connected to the C-terminus of the heavy chain. Once activated, the resulting rFVIIIa has a comparable structure to the endogenous FVIIIa. Novoeight is synthesized by a genetically engineered Chinese hamster ovary (CHO) cell line which secretes rFVIII into the cell culture medium. The rFVIII protein is purified using a series of chromatography steps, one of which is the use of an immunoaffinity column in which a monoclonal antibody, produced in CHO cells and directed against FVIII, is employed to selectively isolate the rFVIII from the medium. The production process includes two dedicated viral clearance steps - a detergent treatment step for inactivation and a 20-nm filtration step for removal of viruses. No additives of human or animal origin are used in the cell culture, purification and formulation of Novoeight.</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-7830-01</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (0169-7830-01)  *  4 mL in 1 VIAL, GLASS (0169-7831-11)  *  4 mL in 1 SYRINGE, GLASS (0169-7008-98) </PackageDescription>
    <NDC11Code>00169-7830-01</NDC11Code>
    <ProductNDC>0169-7830</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Novoeight</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Recombinant</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125466</ApplicationNumber>
    <LabelerName>Novo Nordisk</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Novoeight, Antihemophilic Factor (Recombinant), is a human antihemophilic factor (human blood coagulation. factor VIII (FVIII)) indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes , 2 Perioperative management , 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
    <Description>Novoeight is formulated as a sterile, non-pyrogenic, lyophilized powder for intravenous injection after reconstitution with the diluent (0.9% sodium chloride). Novoeight is available in single-dose vials that contain nominally 250, 500, 1000, 1500, 2000 or 3000 international units (IU) per vial. When reconstituted with the appropriate volume of diluent, the product contains the following components per mL: 18 mg sodium chloride, 1.5 mg L-histidine, 3 mg sucrose, 0.1 mg polysorbate 80, 0.055 mg L-methionine and 0.25 mg calcium chloride dihydrate. The product contains no preservative. Each vial of Novoeight is labeled with the actual rFVIII activity expressed in IU determined by the one-stage clotting assay, using a reference material calibrated against a World Health Organization (WHO) International Standard for FVIII Concentrates. One IU, as defined by the WHO standard for human FVIII, is approximately equal to the level of FVIII activity in 1 mL of fresh pooled human plasma. The specific activity of Novoeight is approximately 8340 IU per milligram of protein. The active ingredient in Novoeight is a recombinant (r) analogue of human coagulation factor VIII (FVIII) with a molecular mass of 166 kDa, calculated excluding post-translational modifications. The rFVIII molecule in Novoeight is a glycoprotein containing a heavy chain and a light chain, with 21 of the 908 amino acids of the B-domain of endogenous FVIII connected to the C-terminus of the heavy chain. Once activated, the resulting rFVIIIa has a comparable structure to the endogenous FVIIIa. Novoeight is synthesized by a genetically engineered Chinese hamster ovary (CHO) cell line which secretes rFVIII into the cell culture medium. The rFVIII protein is purified using a series of chromatography steps, one of which is the use of an immunoaffinity column in which a monoclonal antibody, produced in CHO cells and directed against FVIII, is employed to selectively isolate the rFVIII from the medium. The production process includes two dedicated viral clearance steps - a detergent treatment step for inactivation and a 20-nm filtration step for removal of viruses. No additives of human or animal origin are used in the cell culture, purification and formulation of Novoeight.</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-7850-01</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (0169-7850-01)  *  4 mL in 1 VIAL, GLASS (0169-7851-11)  *  4 mL in 1 SYRINGE, GLASS (0169-7008-98) </PackageDescription>
    <NDC11Code>00169-7850-01</NDC11Code>
    <ProductNDC>0169-7850</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Novoeight</ProprietaryName>
    <NonProprietaryName>Antihemophilic Factor Recombinant</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20150401</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125466</ApplicationNumber>
    <LabelerName>Novo Nordisk</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Novoeight, Antihemophilic Factor (Recombinant), is a human antihemophilic factor (human blood coagulation. factor VIII (FVIII)) indicated for use in adults and children with hemophilia A for: 1 On-demand treatment and control of bleeding episodes , 2 Perioperative management , 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
    <Description>Novoeight is formulated as a sterile, non-pyrogenic, lyophilized powder for intravenous injection after reconstitution with the diluent (0.9% sodium chloride). Novoeight is available in single-dose vials that contain nominally 250, 500, 1000, 1500, 2000 or 3000 international units (IU) per vial. When reconstituted with the appropriate volume of diluent, the product contains the following components per mL: 18 mg sodium chloride, 1.5 mg L-histidine, 3 mg sucrose, 0.1 mg polysorbate 80, 0.055 mg L-methionine and 0.25 mg calcium chloride dihydrate. The product contains no preservative. Each vial of Novoeight is labeled with the actual rFVIII activity expressed in IU determined by the one-stage clotting assay, using a reference material calibrated against a World Health Organization (WHO) International Standard for FVIII Concentrates. One IU, as defined by the WHO standard for human FVIII, is approximately equal to the level of FVIII activity in 1 mL of fresh pooled human plasma. The specific activity of Novoeight is approximately 8340 IU per milligram of protein. The active ingredient in Novoeight is a recombinant (r) analogue of human coagulation factor VIII (FVIII) with a molecular mass of 166 kDa, calculated excluding post-translational modifications. The rFVIII molecule in Novoeight is a glycoprotein containing a heavy chain and a light chain, with 21 of the 908 amino acids of the B-domain of endogenous FVIII connected to the C-terminus of the heavy chain. Once activated, the resulting rFVIIIa has a comparable structure to the endogenous FVIIIa. Novoeight is synthesized by a genetically engineered Chinese hamster ovary (CHO) cell line which secretes rFVIII into the cell culture medium. The rFVIII protein is purified using a series of chromatography steps, one of which is the use of an immunoaffinity column in which a monoclonal antibody, produced in CHO cells and directed against FVIII, is employed to selectively isolate the rFVIII from the medium. The production process includes two dedicated viral clearance steps - a detergent treatment step for inactivation and a 20-nm filtration step for removal of viruses. No additives of human or animal origin are used in the cell culture, purification and formulation of Novoeight.</Description>
  </NDC>
</NDCList>