{
"NDC": [
{
"NDCCode": "69097-224-76",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (69097-224-76) / 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "69097-0224-76",
"ProductNDC": "69097-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076768",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "70",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The empirical formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Each tablet, for oral administration contains: 6.53, 13.05, 45.68, 52.21 or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5, 10, 35, 40 and 70 mg, respectively, of free acid, and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, sodium starch glycolate and starch."
},
{
"NDCCode": "69097-224-16",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (69097-224-16) / 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "69097-0224-16",
"ProductNDC": "69097-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076768",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "70",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The empirical formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Each tablet, for oral administration contains: 6.53, 13.05, 45.68, 52.21 or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5, 10, 35, 40 and 70 mg, respectively, of free acid, and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, sodium starch glycolate and starch."
},
{
"NDCCode": "82876-224-40",
"PackageDescription": "118.76 g in 1 JAR (82876-224-40) ",
"NDC11Code": "82876-0224-40",
"ProductNDC": "82876-224",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Healing Hand Cream",
"NonProprietaryName": "Allantoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250801",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Carolina Cannabis Creations LLC",
"SubstanceName": "ALLANTOIN",
"StrengthNumber": ".85",
"StrengthUnit": "g/118.76g",
"Status": "Active",
"LastUpdate": "2025-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250801",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent and temporarily protects and helps relieve chafed, chapped, or cracked skin helps prevent and protect from the drying effects of wind and cold weather."
},
{
"NDCCode": "69097-031-91",
"PackageDescription": "4 CARTON in 1 CARTON (69097-031-91) / 2 BLISTER PACK in 1 CARTON (69097-031-73) / 14 CAPSULE in 1 BLISTER PACK (69097-031-76) ",
"NDC11Code": "69097-0031-91",
"ProductNDC": "69097-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nilotinib",
"NonProprietaryName": "Nilotinib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250618",
"EndMarketingDate": "20270430",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA218922",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "NILOTINIB",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250618",
"EndMarketingDatePackage": "20270430",
"SamplePackage": "N",
"IndicationAndUsage": "Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).",
"Description": "Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution."
},
{
"NDCCode": "69097-032-91",
"PackageDescription": "4 CARTON in 1 CARTON (69097-032-91) / 2 BLISTER PACK in 1 CARTON (69097-032-73) / 14 CAPSULE in 1 BLISTER PACK (69097-032-76) ",
"NDC11Code": "69097-0032-91",
"ProductNDC": "69097-032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nilotinib",
"NonProprietaryName": "Nilotinib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250618",
"EndMarketingDate": "20270430",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA218922",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "NILOTINIB",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250618",
"EndMarketingDatePackage": "20270430",
"SamplePackage": "N",
"IndicationAndUsage": "Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).",
"Description": "Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution."
},
{
"NDCCode": "69097-223-76",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (69097-223-76) / 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "69097-0223-76",
"ProductNDC": "69097-223",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate Sodium",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076768",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "35",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080804",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The empirical formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Each tablet, for oral administration contains: 6.53, 13.05, 45.68, 52.21 or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5, 10, 35, 40 and 70 mg, respectively, of free acid, and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, sodium starch glycolate and starch."
},
{
"NDCCode": "69097-377-76",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (69097-377-76) > 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "69097-0377-76",
"ProductNDC": "69097-377",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosentan",
"NonProprietaryName": "Bosentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210342",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "BOSENTAN",
"StrengthNumber": "62.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC],Endothelin Receptor Antagonists [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200103",
"SamplePackage": "N"
},
{
"NDCCode": "69097-378-76",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (69097-378-76) > 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "69097-0378-76",
"ProductNDC": "69097-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosentan",
"NonProprietaryName": "Bosentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210342",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "BOSENTAN",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC],Endothelin Receptor Antagonists [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200103",
"SamplePackage": "N"
},
{
"NDCCode": "69097-055-97",
"PackageDescription": "25 VIAL in 1 CARTON (69097-055-97) / 50 mL in 1 VIAL (69097-055-67) ",
"NDC11Code": "69097-0055-97",
"ProductNDC": "69097-055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217892",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250206",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.",
"Description": "Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "69097-077-97",
"PackageDescription": "25 VIAL in 1 CARTON (69097-077-97) / 15 mL in 1 VIAL (69097-077-67) ",
"NDC11Code": "69097-0077-97",
"ProductNDC": "69097-077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217892",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250206",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.",
"Description": "Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "69097-078-97",
"PackageDescription": "25 VIAL in 1 CARTON (69097-078-97) / 5 mL in 1 VIAL (69097-078-67) ",
"NDC11Code": "69097-0078-97",
"ProductNDC": "69097-078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217892",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250206",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.",
"Description": "Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "69097-438-02",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (69097-438-02) ",
"NDC11Code": "69097-0438-02",
"ProductNDC": "69097-438",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218853",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250717",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride is indicated for the treatment of the following [see Clinical Studies (14)]: 1 Major depressive disorder (MDD) in adults, 2 Obsessive-compulsive disorder (OCD) in adults and pediatric patients 6 years and older.",
"Description": "Sertraline hydrochloride capsules contain sertraline hydrochloride, a selective serotonin reuptake inhibitor (SSRI). Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S,4S)-4-(3, 4-dichloro phenyl)-1, 2, 3, 4-tetrahydro-N-methyl-1 naphthylamine hydrochloride. The empirical formula C17H17Cl2N HCI is represented by the following structural formula. Sertraline hydrochloride is a white to off-white, crystalline powder that is sparingly soluble in ethanol, slightly soluble in water and in isopropyl alcohol. Sertraline hydrochloride capsules is for oral administration and contain 168 mg and 224 mg sertraline hydrochloride, equivalent to 150 mg and 200 mg sertraline, and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose, titanium dioxide, gelatin, purified water. Ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide. The 150 mg capsules contain FD&C Yellow No. 5 as a color additive. The 200 mg capsules contain FD&C Blue No. 1 and FD&C Yellow No. 5 as color additives."
},
{
"NDCCode": "69097-451-02",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (69097-451-02) ",
"NDC11Code": "69097-0451-02",
"ProductNDC": "69097-451",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218853",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250717",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride is indicated for the treatment of the following [see Clinical Studies (14)]: 1 Major depressive disorder (MDD) in adults, 2 Obsessive-compulsive disorder (OCD) in adults and pediatric patients 6 years and older.",
"Description": "Sertraline hydrochloride capsules contain sertraline hydrochloride, a selective serotonin reuptake inhibitor (SSRI). Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S,4S)-4-(3, 4-dichloro phenyl)-1, 2, 3, 4-tetrahydro-N-methyl-1 naphthylamine hydrochloride. The empirical formula C17H17Cl2N HCI is represented by the following structural formula. Sertraline hydrochloride is a white to off-white, crystalline powder that is sparingly soluble in ethanol, slightly soluble in water and in isopropyl alcohol. Sertraline hydrochloride capsules is for oral administration and contain 168 mg and 224 mg sertraline hydrochloride, equivalent to 150 mg and 200 mg sertraline, and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose, titanium dioxide, gelatin, purified water. Ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide. The 150 mg capsules contain FD&C Yellow No. 5 as a color additive. The 200 mg capsules contain FD&C Blue No. 1 and FD&C Yellow No. 5 as color additives."
},
{
"NDCCode": "69097-362-02",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (69097-362-02) ",
"NDC11Code": "69097-0362-02",
"ProductNDC": "69097-362",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abacavir And Lamivudine",
"NonProprietaryName": "Abacavir And Lamivudine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091144",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "ABACAVIR SULFATE; LAMIVUDINE",
"StrengthNumber": "600; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 1A1 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170329",
"SamplePackage": "N",
"IndicationAndUsage": "Abacavir and lamivudine tablets, a combination of abacavir and lamivudine, both nucleoside analogue HIV-1 reverse transcriptase inhibitors, is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection. (1).",
"Description": "Abacavir and lamivudine tablets USP. Abacavir and lamivudine tablets USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR®) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets USP are for oral administration. Each orange, film-coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate and 300 mg of lamivudine, and the inactive ingredients microcrystalline cellulose, sodium starch glycolate, hypromellose, corn starch, colloidal silicon dioxide, magnesium stearate. The tablets are coated with a film (Opadry orange 14B53805) that is made of hyperomellose 15CP, titanium dioxide, PEG 400, FD&C Yellow No 6, polysorbate 80. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g per mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g per mol. It has the following structural formula. Lamivudine is a white to off-white crystalline solid and is soluble in water."
},
{
"NDCCode": "69097-514-03",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (69097-514-03) ",
"NDC11Code": "69097-0514-03",
"ProductNDC": "69097-514",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abacavir",
"NonProprietaryName": "Abacavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078119",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "ABACAVIR SULFATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171121",
"SamplePackage": "N",
"IndicationAndUsage": "Abacavir tablet, a nucleoside analogue human immunodeficiency virus (HIV-1) reverse transcriptase inhibitor, is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection.",
"Description": "Abacavir sulfate is a synthetic carbocyclic nucleoside analogue with inhibitory activity against HIV-1. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6- (cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g per mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. Abacavir tablets USP 300 mg are for oral administration. Each tablet contains abacavir sulfate equivalent to 300 mg of abacavir as active ingredient and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, corn starch, hypromellose, magnesium stearate, colloidal silicon dioxide and opadry yellow 15C52843 (consist of hypromellose, titanium dioxide, polyethylene glycol, iron oxide yellow, polysorbate 80). In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir."
},
{
"NDCCode": "69097-639-03",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (69097-639-03) ",
"NDC11Code": "69097-0639-03",
"ProductNDC": "69097-639",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nintedanib",
"NonProprietaryName": "Nintedanib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260402",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212609",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "NINTEDANIB ESYLATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260402",
"SamplePackage": "N",
"IndicationAndUsage": "Nintedanib is a kinase inhibitor indicated in adults for: : 1 Treatment of idiopathic pulmonary fibrosis (IPF). (1.1), 2 Treatment of chronic fibrosing interstitial lung diseases (ILDs) with a progressive phenotype. (1.2), 3 Slowing the rate of decline in pulmonary function in patients with systemic sclerosis-associated interstitial lung disease (SSc-ILD). (1.3).",
"Description": "Nintedanib capsules contain nintedanib, a kinase inhibitor [see Mechanism of Action (12.1)]. Nintedanib is presented as the ethanesulfonate salt (esylate), with the chemical name 1H-Indole-6-carboxylic acid, 2,3-dihydro-3-[[[4-[methyl[(4-methyl-1-piperazinyl)acetyl]amino]phenyl]amino]phenylmethylene]-2-oxo-,methyl ester, (3Z)-, ethanesulfonate (1:1). Its structural formula is:. Nintedanib esylate is a pale yellow to yellow colored powder with an empirical formula of C31H33N5O4·C2H6O3S and a molecular weight of 649.76 g/mol. Nintedanib capsules for oral administration are available in 2 dose strengths containing 100 mg or 150 mg of nintedanib (equivalent to 120.40 mg or 180.60 mg nintedanib ethanesulfonate, respectively). The inactive ingredients of nintedanib capsule are the following: Fill Material: medium chain triglyceride, hard fat, lecithin. Capsule Shell: gelatin, glycerin, titanium dioxide, red ferric oxide, yellow ferric oxide."
},
{
"NDCCode": "69097-641-03",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (69097-641-03) ",
"NDC11Code": "69097-0641-03",
"ProductNDC": "69097-641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nintedanib",
"NonProprietaryName": "Nintedanib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260402",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212609",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "NINTEDANIB ESYLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260402",
"SamplePackage": "N",
"IndicationAndUsage": "Nintedanib is a kinase inhibitor indicated in adults for: : 1 Treatment of idiopathic pulmonary fibrosis (IPF). (1.1), 2 Treatment of chronic fibrosing interstitial lung diseases (ILDs) with a progressive phenotype. (1.2), 3 Slowing the rate of decline in pulmonary function in patients with systemic sclerosis-associated interstitial lung disease (SSc-ILD). (1.3).",
"Description": "Nintedanib capsules contain nintedanib, a kinase inhibitor [see Mechanism of Action (12.1)]. Nintedanib is presented as the ethanesulfonate salt (esylate), with the chemical name 1H-Indole-6-carboxylic acid, 2,3-dihydro-3-[[[4-[methyl[(4-methyl-1-piperazinyl)acetyl]amino]phenyl]amino]phenylmethylene]-2-oxo-,methyl ester, (3Z)-, ethanesulfonate (1:1). Its structural formula is:. Nintedanib esylate is a pale yellow to yellow colored powder with an empirical formula of C31H33N5O4·C2H6O3S and a molecular weight of 649.76 g/mol. Nintedanib capsules for oral administration are available in 2 dose strengths containing 100 mg or 150 mg of nintedanib (equivalent to 120.40 mg or 180.60 mg nintedanib ethanesulfonate, respectively). The inactive ingredients of nintedanib capsule are the following: Fill Material: medium chain triglyceride, hard fat, lecithin. Capsule Shell: gelatin, glycerin, titanium dioxide, red ferric oxide, yellow ferric oxide."
},
{
"NDCCode": "0054-0650-25",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (0054-0650-25) ",
"NDC11Code": "00054-0650-25",
"ProductNDC": "0054-0650",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen, Caffeine And Codeine Phosphate",
"NonProprietaryName": "Butalbital, Acetaminophen, Caffeine And Codeine Phosphate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215138",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE; CODEINE PHOSPHATE",
"StrengthNumber": "50; 300; 40; 30",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Full Opioid Agonists [MoA], Methylxanthine [EPC], Opioid Agonist [EPC], Xanthines [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220509",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are indicated for the management of the symptom complex of tension (or muscle contraction) headache when non-opioid analgesic and alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy, [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are supplied in two strength combinations in capsule form for oral administration. Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, 50 mg/300 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….300 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….325 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, USP (5-allyl-5-isobutylbarbituric acid), is a short-to intermediate-acting barbiturate. It has the following structural formula. MW = 224.26. Acetaminophen, USP (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. MW = 151.16. Caffeine, USP (1,3,7-trimethylxanthine), a methylxanthine, is a central nervous system stimulant. It has the following structural formula:. C8H10N4O2. MW = 194.19. Codeine Phosphate, USP (7,8-Didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1)(salt) hemihydrate) is an opioid agonist. It has the following structural formula. C18H21NO3H3PO41/2H2O. MW = 406.37. Inactive Ingredients: pregelatinized starch. colloidal silicon dioxide, magnesium stearate. The capsule cap is printed with white ink. The white ink contains shellac glaze, titanium dioxide, ammonium hydroxide, propylene glycol, and simethicone. The capsule body is printed with black ink. The black ink contains shellac glaze, iron oxide black, propylene glycol, and ammonium hydroxide. The capsule shell contains: gelatin, titanium dioxide for both strengths and FD&C red #40, FD&C blue #1 in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/300 mg/40mg/30mg and FD&C red #3, FD&C blue #2, red iron oxide, yellow iron oxide in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40mg/30mg."
},
{
"NDCCode": "0054-3000-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (0054-3000-01) ",
"NDC11Code": "00054-3000-01",
"ProductNDC": "0054-3000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen, Caffeine And Codeine Phosphate",
"NonProprietaryName": "Butalbital, Acetaminophen, Caffeine And Codeine Phosphate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215138",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE; CODEINE PHOSPHATE",
"StrengthNumber": "50; 325; 40; 30",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Full Opioid Agonists [MoA], Methylxanthine [EPC], Opioid Agonist [EPC], Xanthines [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220509",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are indicated for the management of the symptom complex of tension (or muscle contraction) headache when non-opioid analgesic and alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy, [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are supplied in two strength combinations in capsule form for oral administration. Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, 50 mg/300 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….300 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….325 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, USP (5-allyl-5-isobutylbarbituric acid), is a short-to intermediate-acting barbiturate. It has the following structural formula. MW = 224.26. Acetaminophen, USP (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. MW = 151.16. Caffeine, USP (1,3,7-trimethylxanthine), a methylxanthine, is a central nervous system stimulant. It has the following structural formula:. C8H10N4O2. MW = 194.19. Codeine Phosphate, USP (7,8-Didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1)(salt) hemihydrate) is an opioid agonist. It has the following structural formula. C18H21NO3H3PO41/2H2O. MW = 406.37. Inactive Ingredients: pregelatinized starch. colloidal silicon dioxide, magnesium stearate. The capsule cap is printed with white ink. The white ink contains shellac glaze, titanium dioxide, ammonium hydroxide, propylene glycol, and simethicone. The capsule body is printed with black ink. The black ink contains shellac glaze, iron oxide black, propylene glycol, and ammonium hydroxide. The capsule shell contains: gelatin, titanium dioxide for both strengths and FD&C red #40, FD&C blue #1 in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/300 mg/40mg/30mg and FD&C red #3, FD&C blue #2, red iron oxide, yellow iron oxide in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40mg/30mg."
},
{
"NDCCode": "0078-0630-35",
"PackageDescription": "224 PACKAGE in 1 BOX, UNIT-DOSE (0078-0630-35) > 56 BLISTER PACK in 1 PACKAGE (0078-0630-56) > 4 CAPSULE in 1 BLISTER PACK (0078-0630-11) ",
"NDC11Code": "00078-0630-35",
"ProductNDC": "0078-0630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobi Podhaler",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130322",
"EndMarketingDate": "20220731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201688",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "28",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130322",
"EndMarketingDatePackage": "20220731",
"SamplePackage": "N"
},
{
"NDCCode": "0143-9289-01",
"PackageDescription": "1 VIAL in 1 CARTON (0143-9289-01) / 5 mL in 1 VIAL",
"NDC11Code": "00143-9289-01",
"ProductNDC": "0143-9289",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol Valerate",
"NonProprietaryName": "Estradiol Valerate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20200421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203723",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ESTRADIOL VALERATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200421",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .",
"Description": "Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3 MW 356.50."
},
{
"NDCCode": "0143-9290-01",
"PackageDescription": "1 VIAL in 1 CARTON (0143-9290-01) / 5 mL in 1 VIAL",
"NDC11Code": "00143-9290-01",
"ProductNDC": "0143-9290",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol Valerate",
"NonProprietaryName": "Estradiol Valerate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20200421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203723",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ESTRADIOL VALERATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200421",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .",
"Description": "Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3 MW 356.50."
},
{
"NDCCode": "0143-9291-01",
"PackageDescription": "1 VIAL in 1 CARTON (0143-9291-01) / 5 mL in 1 VIAL",
"NDC11Code": "00143-9291-01",
"ProductNDC": "0143-9291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol Valerate",
"NonProprietaryName": "Estradiol Valerate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20200421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203723",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "ESTRADIOL VALERATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200421",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .",
"Description": "Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3 MW 356.50."
},
{
"NDCCode": "0338-0673-04",
"PackageDescription": "1000 mL in 1 BAG (0338-0673-04) ",
"NDC11Code": "00338-0673-04",
"ProductNDC": "0338-0673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose And Sodium Chloride",
"NonProprietaryName": "Potassium Chloride, Dextrose Monohydrate And Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19790202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018008",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "POTASSIUM CHLORIDE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE",
"StrengthNumber": "224; 5; 450",
"StrengthUnit": "mg/100mL; g/100mL; mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19790202",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride in Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.",
"Description": "Potassium Chloride in Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single dose container for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0338-0685-04",
"PackageDescription": "1000 mL in 1 BAG (0338-0685-04)",
"NDC11Code": "00338-0685-04",
"ProductNDC": "0338-0685",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride In Dextrose",
"NonProprietaryName": "Potassium Chloride And Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19790201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017634",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXTROSE MONOHYDRATE; POTASSIUM CHLORIDE",
"StrengthNumber": "5; 224",
"StrengthUnit": "g/100mL; mg/100mL",
"Pharm_Classes": "Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-12-19"
},
{
"NDCCode": "0404-9936-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 BAG (0404-9936-10) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00404-9936-10",
"ProductNDC": "0404-9936",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088901",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "meq/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220113",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride for Injection Concentrate, USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible.",
"Description": "Potassium Chloride for Injection Concentrate, USP is a sterile, nonpyrogenic concentrated solution of Potassium Chloride, USP in Water for Injection to be administered by intravenous infusion only after dilution in a larger volume of fluid. Each mL of Potassium Chloride for Injection Concentrate contains 2 mEq of K+ and Cl– equivalent to 149 mg of potassium chloride and has an osmolarity of 4000 mOsmol/L (calc). A more concentrated Potassium Chloride for Injection Concentrate is also available. Each mL of this injection contains 3 mEq of K+ and Cl– equivalent to 224 mg of potassium chloride and has an osmolarity of 6000 mOsmol/L(calc). pH (4.0-8.0) may have been adjusted with hydrochloric acid and if necessary, potassium hydroxide. Some packages are intended for multiple dose use and contain preservatives (0.05% methylparaben and 0.005% propylparaben). A summary of the available products is presented in the HOW SUPPLIED section. Potassium Chloride for Injection Concentrate (appropriately diluted) is a parenteral fluid and electrolyte replenisher."
},
{
"NDCCode": "0404-9936-20",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 BAG (0404-9936-20) / 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00404-9936-20",
"ProductNDC": "0404-9936",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088901",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "meq/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220113",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Chloride for Injection Concentrate, USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible.",
"Description": "Potassium Chloride for Injection Concentrate, USP is a sterile, nonpyrogenic concentrated solution of Potassium Chloride, USP in Water for Injection to be administered by intravenous infusion only after dilution in a larger volume of fluid. Each mL of Potassium Chloride for Injection Concentrate contains 2 mEq of K+ and Cl– equivalent to 149 mg of potassium chloride and has an osmolarity of 4000 mOsmol/L (calc). A more concentrated Potassium Chloride for Injection Concentrate is also available. Each mL of this injection contains 3 mEq of K+ and Cl– equivalent to 224 mg of potassium chloride and has an osmolarity of 6000 mOsmol/L(calc). pH (4.0-8.0) may have been adjusted with hydrochloric acid and if necessary, potassium hydroxide. Some packages are intended for multiple dose use and contain preservatives (0.05% methylparaben and 0.005% propylparaben). A summary of the available products is presented in the HOW SUPPLIED section. Potassium Chloride for Injection Concentrate (appropriately diluted) is a parenteral fluid and electrolyte replenisher."
},
{
"NDCCode": "0409-0032-01",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) ",
"NDC11Code": "00409-0032-01",
"ProductNDC": "0409-0032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphates",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217459",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250929",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .",
"Description": "Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route."
},
{
"NDCCode": "0409-7295-01",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-7295-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-7295-11) ",
"NDC11Code": "00409-7295-01",
"ProductNDC": "0409-7295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic And Potassium Phosphate, Dibasic",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050826",
"EndMarketingDate": "20260201",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DIBASIC POTASSIUM PHOSPHATE; MONOBASIC POTASSIUM PHOSPHATE",
"StrengthNumber": "236; 224",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20050826",
"EndMarketingDatePackage": "20260201",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of potassium (K+ 4.4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions. Safety has not been established for parenteral nutrition in pediatric patients due to the risk of aluminum toxicity. (See WARNINGS).",
"Description": "Potassium Phosphates Injection, USP 3 mM P/mL (millimoles/mL) is a sterile, nonpyrogenic, concentrated solution containing a mixture of mono- and dibasic potassium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each milliliter contains 224 mg of monobasic potassium phosphate, anhydrous and 236 mg of dibasic potassium phosphate, anhydrous. One mM of phosphorus weighs 31 mg and the product provides 93 mg (approximately 3 mM) of phosphorus/mL, plus 170.3 mg (4.4 mEq) of potassium/mL. Note: 1 mM P=1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The osmolar concentration is 7.4 mOsmol/mL (calc.). The solution is intended as an alternative to sodium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. Monobasic Potassium Phosphate, NF (monopotassium phosphate), anhydrous is chemically designated KH2PO4, colorless crystals or white granular powder freely soluble in water. Dibasic Potassium Phosphate, USP (dipotassium phosphate), anhydrous is chemically designated K2HPO4, white granules very soluble in water."
},
{
"NDCCode": "0409-7295-17",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (0409-7295-17) > 15 mL in 1 VIAL, SINGLE-DOSE (0409-7295-27)",
"NDC11Code": "00409-7295-17",
"ProductNDC": "0409-7295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Phosphates",
"NonProprietaryName": "Potassium Phosphate, Monobasic And Potassium Phosphate, Dibasic",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC",
"StrengthNumber": "224; 236",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-08-23",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69097-224-76</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (69097-224-76) / 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69097-0224-76</NDC11Code>
<ProductNDC>69097-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076768</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The empirical formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Each tablet, for oral administration contains: 6.53, 13.05, 45.68, 52.21 or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5, 10, 35, 40 and 70 mg, respectively, of free acid, and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, sodium starch glycolate and starch.</Description>
</NDC>
<NDC>
<NDCCode>69097-224-16</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (69097-224-16) / 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69097-0224-16</NDC11Code>
<ProductNDC>69097-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076768</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The empirical formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Each tablet, for oral administration contains: 6.53, 13.05, 45.68, 52.21 or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5, 10, 35, 40 and 70 mg, respectively, of free acid, and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, sodium starch glycolate and starch.</Description>
</NDC>
<NDC>
<NDCCode>82876-224-40</NDCCode>
<PackageDescription>118.76 g in 1 JAR (82876-224-40) </PackageDescription>
<NDC11Code>82876-0224-40</NDC11Code>
<ProductNDC>82876-224</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Healing Hand Cream</ProprietaryName>
<NonProprietaryName>Allantoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Carolina Cannabis Creations LLC</LabelerName>
<SubstanceName>ALLANTOIN</SubstanceName>
<StrengthNumber>.85</StrengthNumber>
<StrengthUnit>g/118.76g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent and temporarily protects and helps relieve chafed, chapped, or cracked skin helps prevent and protect from the drying effects of wind and cold weather.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69097-031-91</NDCCode>
<PackageDescription>4 CARTON in 1 CARTON (69097-031-91) / 2 BLISTER PACK in 1 CARTON (69097-031-73) / 14 CAPSULE in 1 BLISTER PACK (69097-031-76) </PackageDescription>
<NDC11Code>69097-0031-91</NDC11Code>
<ProductNDC>69097-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nilotinib</ProprietaryName>
<NonProprietaryName>Nilotinib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250618</StartMarketingDate>
<EndMarketingDate>20270430</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA218922</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>NILOTINIB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250618</StartMarketingDatePackage>
<EndMarketingDatePackage>20270430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
<Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>69097-032-91</NDCCode>
<PackageDescription>4 CARTON in 1 CARTON (69097-032-91) / 2 BLISTER PACK in 1 CARTON (69097-032-73) / 14 CAPSULE in 1 BLISTER PACK (69097-032-76) </PackageDescription>
<NDC11Code>69097-0032-91</NDC11Code>
<ProductNDC>69097-032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nilotinib</ProprietaryName>
<NonProprietaryName>Nilotinib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250618</StartMarketingDate>
<EndMarketingDate>20270430</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA218922</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>NILOTINIB</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250618</StartMarketingDatePackage>
<EndMarketingDatePackage>20270430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
<Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>69097-223-76</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (69097-223-76) / 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69097-0223-76</NDC11Code>
<ProductNDC>69097-223</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate Sodium</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076768</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2), 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The empirical formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, non-hygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Each tablet, for oral administration contains: 6.53, 13.05, 45.68, 52.21 or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5, 10, 35, 40 and 70 mg, respectively, of free acid, and the following inactive ingredients: magnesium stearate, mannitol, microcrystalline cellulose, sodium starch glycolate and starch.</Description>
</NDC>
<NDC>
<NDCCode>69097-377-76</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (69097-377-76) > 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69097-0377-76</NDC11Code>
<ProductNDC>69097-377</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosentan</ProprietaryName>
<NonProprietaryName>Bosentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210342</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>BOSENTAN</SubstanceName>
<StrengthNumber>62.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC],Endothelin Receptor Antagonists [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69097-378-76</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (69097-378-76) > 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69097-0378-76</NDC11Code>
<ProductNDC>69097-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosentan</ProprietaryName>
<NonProprietaryName>Bosentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210342</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>BOSENTAN</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC],Endothelin Receptor Antagonists [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69097-055-97</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (69097-055-97) / 50 mL in 1 VIAL (69097-055-67) </PackageDescription>
<NDC11Code>69097-0055-97</NDC11Code>
<ProductNDC>69097-055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217892</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
<Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>69097-077-97</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (69097-077-97) / 15 mL in 1 VIAL (69097-077-67) </PackageDescription>
<NDC11Code>69097-0077-97</NDC11Code>
<ProductNDC>69097-077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217892</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
<Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>69097-078-97</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (69097-078-97) / 5 mL in 1 VIAL (69097-078-67) </PackageDescription>
<NDC11Code>69097-0078-97</NDC11Code>
<ProductNDC>69097-078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217892</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium phosphates injection is indicated as a source of phosphorus: 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated., 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated.</IndicationAndUsage>
<Description>Potassium phosphates injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as a 5 mL and 15 mL single-dose vials and a 50 mL Pharmacy Bulk Package vial. Monobasic Potassium Phosphate is chemically designated KH 2PO 4, molecular weight 136.09, white or colorless crystals or crystalline powder freely soluble in water. Dibasic Potassium Phosphate is chemically designated K 2HPO 4, molecular weight 174.18, colorless to white granular powder freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>69097-438-02</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (69097-438-02) </PackageDescription>
<NDC11Code>69097-0438-02</NDC11Code>
<ProductNDC>69097-438</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218853</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride is indicated for the treatment of the following [see Clinical Studies (14)]: 1 Major depressive disorder (MDD) in adults, 2 Obsessive-compulsive disorder (OCD) in adults and pediatric patients 6 years and older.</IndicationAndUsage>
<Description>Sertraline hydrochloride capsules contain sertraline hydrochloride, a selective serotonin reuptake inhibitor (SSRI). Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S,4S)-4-(3, 4-dichloro phenyl)-1, 2, 3, 4-tetrahydro-N-methyl-1 naphthylamine hydrochloride. The empirical formula C17H17Cl2N HCI is represented by the following structural formula. Sertraline hydrochloride is a white to off-white, crystalline powder that is sparingly soluble in ethanol, slightly soluble in water and in isopropyl alcohol. Sertraline hydrochloride capsules is for oral administration and contain 168 mg and 224 mg sertraline hydrochloride, equivalent to 150 mg and 200 mg sertraline, and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose, titanium dioxide, gelatin, purified water. Ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide. The 150 mg capsules contain FD&C Yellow No. 5 as a color additive. The 200 mg capsules contain FD&C Blue No. 1 and FD&C Yellow No. 5 as color additives.</Description>
</NDC>
<NDC>
<NDCCode>69097-451-02</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (69097-451-02) </PackageDescription>
<NDC11Code>69097-0451-02</NDC11Code>
<ProductNDC>69097-451</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218853</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride is indicated for the treatment of the following [see Clinical Studies (14)]: 1 Major depressive disorder (MDD) in adults, 2 Obsessive-compulsive disorder (OCD) in adults and pediatric patients 6 years and older.</IndicationAndUsage>
<Description>Sertraline hydrochloride capsules contain sertraline hydrochloride, a selective serotonin reuptake inhibitor (SSRI). Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S,4S)-4-(3, 4-dichloro phenyl)-1, 2, 3, 4-tetrahydro-N-methyl-1 naphthylamine hydrochloride. The empirical formula C17H17Cl2N HCI is represented by the following structural formula. Sertraline hydrochloride is a white to off-white, crystalline powder that is sparingly soluble in ethanol, slightly soluble in water and in isopropyl alcohol. Sertraline hydrochloride capsules is for oral administration and contain 168 mg and 224 mg sertraline hydrochloride, equivalent to 150 mg and 200 mg sertraline, and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose, titanium dioxide, gelatin, purified water. Ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide. The 150 mg capsules contain FD&C Yellow No. 5 as a color additive. The 200 mg capsules contain FD&C Blue No. 1 and FD&C Yellow No. 5 as color additives.</Description>
</NDC>
<NDC>
<NDCCode>69097-362-02</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (69097-362-02) </PackageDescription>
<NDC11Code>69097-0362-02</NDC11Code>
<ProductNDC>69097-362</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abacavir And Lamivudine</ProprietaryName>
<NonProprietaryName>Abacavir And Lamivudine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091144</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>ABACAVIR SULFATE; LAMIVUDINE</SubstanceName>
<StrengthNumber>600; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A1 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abacavir and lamivudine tablets, a combination of abacavir and lamivudine, both nucleoside analogue HIV-1 reverse transcriptase inhibitors, is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection. (1).</IndicationAndUsage>
<Description>Abacavir and lamivudine tablets USP. Abacavir and lamivudine tablets USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR®) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets USP are for oral administration. Each orange, film-coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate and 300 mg of lamivudine, and the inactive ingredients microcrystalline cellulose, sodium starch glycolate, hypromellose, corn starch, colloidal silicon dioxide, magnesium stearate. The tablets are coated with a film (Opadry orange 14B53805) that is made of hyperomellose 15CP, titanium dioxide, PEG 400, FD&C Yellow No 6, polysorbate 80. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g per mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g per mol. It has the following structural formula. Lamivudine is a white to off-white crystalline solid and is soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>69097-514-03</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (69097-514-03) </PackageDescription>
<NDC11Code>69097-0514-03</NDC11Code>
<ProductNDC>69097-514</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abacavir</ProprietaryName>
<NonProprietaryName>Abacavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078119</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>ABACAVIR SULFATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abacavir tablet, a nucleoside analogue human immunodeficiency virus (HIV-1) reverse transcriptase inhibitor, is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection.</IndicationAndUsage>
<Description>Abacavir sulfate is a synthetic carbocyclic nucleoside analogue with inhibitory activity against HIV-1. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6- (cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g per mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. Abacavir tablets USP 300 mg are for oral administration. Each tablet contains abacavir sulfate equivalent to 300 mg of abacavir as active ingredient and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, corn starch, hypromellose, magnesium stearate, colloidal silicon dioxide and opadry yellow 15C52843 (consist of hypromellose, titanium dioxide, polyethylene glycol, iron oxide yellow, polysorbate 80). In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir.</Description>
</NDC>
<NDC>
<NDCCode>69097-639-03</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (69097-639-03) </PackageDescription>
<NDC11Code>69097-0639-03</NDC11Code>
<ProductNDC>69097-639</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nintedanib</ProprietaryName>
<NonProprietaryName>Nintedanib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260402</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212609</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>NINTEDANIB ESYLATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nintedanib is a kinase inhibitor indicated in adults for: : 1 Treatment of idiopathic pulmonary fibrosis (IPF). (1.1), 2 Treatment of chronic fibrosing interstitial lung diseases (ILDs) with a progressive phenotype. (1.2), 3 Slowing the rate of decline in pulmonary function in patients with systemic sclerosis-associated interstitial lung disease (SSc-ILD). (1.3).</IndicationAndUsage>
<Description>Nintedanib capsules contain nintedanib, a kinase inhibitor [see Mechanism of Action (12.1)]. Nintedanib is presented as the ethanesulfonate salt (esylate), with the chemical name 1H-Indole-6-carboxylic acid, 2,3-dihydro-3-[[[4-[methyl[(4-methyl-1-piperazinyl)acetyl]amino]phenyl]amino]phenylmethylene]-2-oxo-,methyl ester, (3Z)-, ethanesulfonate (1:1). Its structural formula is:. Nintedanib esylate is a pale yellow to yellow colored powder with an empirical formula of C31H33N5O4·C2H6O3S and a molecular weight of 649.76 g/mol. Nintedanib capsules for oral administration are available in 2 dose strengths containing 100 mg or 150 mg of nintedanib (equivalent to 120.40 mg or 180.60 mg nintedanib ethanesulfonate, respectively). The inactive ingredients of nintedanib capsule are the following: Fill Material: medium chain triglyceride, hard fat, lecithin. Capsule Shell: gelatin, glycerin, titanium dioxide, red ferric oxide, yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>69097-641-03</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (69097-641-03) </PackageDescription>
<NDC11Code>69097-0641-03</NDC11Code>
<ProductNDC>69097-641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nintedanib</ProprietaryName>
<NonProprietaryName>Nintedanib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260402</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212609</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>NINTEDANIB ESYLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nintedanib is a kinase inhibitor indicated in adults for: : 1 Treatment of idiopathic pulmonary fibrosis (IPF). (1.1), 2 Treatment of chronic fibrosing interstitial lung diseases (ILDs) with a progressive phenotype. (1.2), 3 Slowing the rate of decline in pulmonary function in patients with systemic sclerosis-associated interstitial lung disease (SSc-ILD). (1.3).</IndicationAndUsage>
<Description>Nintedanib capsules contain nintedanib, a kinase inhibitor [see Mechanism of Action (12.1)]. Nintedanib is presented as the ethanesulfonate salt (esylate), with the chemical name 1H-Indole-6-carboxylic acid, 2,3-dihydro-3-[[[4-[methyl[(4-methyl-1-piperazinyl)acetyl]amino]phenyl]amino]phenylmethylene]-2-oxo-,methyl ester, (3Z)-, ethanesulfonate (1:1). Its structural formula is:. Nintedanib esylate is a pale yellow to yellow colored powder with an empirical formula of C31H33N5O4·C2H6O3S and a molecular weight of 649.76 g/mol. Nintedanib capsules for oral administration are available in 2 dose strengths containing 100 mg or 150 mg of nintedanib (equivalent to 120.40 mg or 180.60 mg nintedanib ethanesulfonate, respectively). The inactive ingredients of nintedanib capsule are the following: Fill Material: medium chain triglyceride, hard fat, lecithin. Capsule Shell: gelatin, glycerin, titanium dioxide, red ferric oxide, yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>0054-0650-25</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (0054-0650-25) </PackageDescription>
<NDC11Code>00054-0650-25</NDC11Code>
<ProductNDC>0054-0650</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen, Caffeine And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen, Caffeine And Codeine Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215138</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>50; 300; 40; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Full Opioid Agonists [MoA], Methylxanthine [EPC], Opioid Agonist [EPC], Xanthines [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are indicated for the management of the symptom complex of tension (or muscle contraction) headache when non-opioid analgesic and alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy, [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are supplied in two strength combinations in capsule form for oral administration. Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, 50 mg/300 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….300 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….325 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, USP (5-allyl-5-isobutylbarbituric acid), is a short-to intermediate-acting barbiturate. It has the following structural formula. MW = 224.26. Acetaminophen, USP (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. MW = 151.16. Caffeine, USP (1,3,7-trimethylxanthine), a methylxanthine, is a central nervous system stimulant. It has the following structural formula:. C8H10N4O2. MW = 194.19. Codeine Phosphate, USP (7,8-Didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1)(salt) hemihydrate) is an opioid agonist. It has the following structural formula. C18H21NO3H3PO41/2H2O. MW = 406.37. Inactive Ingredients: pregelatinized starch. colloidal silicon dioxide, magnesium stearate. The capsule cap is printed with white ink. The white ink contains shellac glaze, titanium dioxide, ammonium hydroxide, propylene glycol, and simethicone. The capsule body is printed with black ink. The black ink contains shellac glaze, iron oxide black, propylene glycol, and ammonium hydroxide. The capsule shell contains: gelatin, titanium dioxide for both strengths and FD&C red #40, FD&C blue #1 in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/300 mg/40mg/30mg and FD&C red #3, FD&C blue #2, red iron oxide, yellow iron oxide in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40mg/30mg.</Description>
</NDC>
<NDC>
<NDCCode>0054-3000-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (0054-3000-01) </PackageDescription>
<NDC11Code>00054-3000-01</NDC11Code>
<ProductNDC>0054-3000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen, Caffeine And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen, Caffeine And Codeine Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215138</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>50; 325; 40; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Full Opioid Agonists [MoA], Methylxanthine [EPC], Opioid Agonist [EPC], Xanthines [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are indicated for the management of the symptom complex of tension (or muscle contraction) headache when non-opioid analgesic and alternative treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy, [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules are supplied in two strength combinations in capsule form for oral administration. Butalbital, Acetaminophen, Caffeine, and Codeine Phosphate Capsules, 50 mg/300 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….300 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40 mg/30 mg contain. Butalbital, USP……………………50 mgAcetaminophen, USP…………….325 mgCaffeine, USP……………………..40 mg. Codeine Phosphate, USP………….30 mg. Butalbital, USP (5-allyl-5-isobutylbarbituric acid), is a short-to intermediate-acting barbiturate. It has the following structural formula. MW = 224.26. Acetaminophen, USP (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. MW = 151.16. Caffeine, USP (1,3,7-trimethylxanthine), a methylxanthine, is a central nervous system stimulant. It has the following structural formula:. C8H10N4O2. MW = 194.19. Codeine Phosphate, USP (7,8-Didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1)(salt) hemihydrate) is an opioid agonist. It has the following structural formula. C18H21NO3H3PO41/2H2O. MW = 406.37. Inactive Ingredients: pregelatinized starch. colloidal silicon dioxide, magnesium stearate. The capsule cap is printed with white ink. The white ink contains shellac glaze, titanium dioxide, ammonium hydroxide, propylene glycol, and simethicone. The capsule body is printed with black ink. The black ink contains shellac glaze, iron oxide black, propylene glycol, and ammonium hydroxide. The capsule shell contains: gelatin, titanium dioxide for both strengths and FD&C red #40, FD&C blue #1 in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/300 mg/40mg/30mg and FD&C red #3, FD&C blue #2, red iron oxide, yellow iron oxide in the Butalbital, Acetaminophen, Caffeine and Codeine Phosphate Capsules, 50 mg/325 mg/40mg/30mg.</Description>
</NDC>
<NDC>
<NDCCode>0078-0630-35</NDCCode>
<PackageDescription>224 PACKAGE in 1 BOX, UNIT-DOSE (0078-0630-35) > 56 BLISTER PACK in 1 PACKAGE (0078-0630-56) > 4 CAPSULE in 1 BLISTER PACK (0078-0630-11) </PackageDescription>
<NDC11Code>00078-0630-35</NDC11Code>
<ProductNDC>0078-0630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobi Podhaler</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130322</StartMarketingDate>
<EndMarketingDate>20220731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201688</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>28</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130322</StartMarketingDatePackage>
<EndMarketingDatePackage>20220731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0143-9289-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0143-9289-01) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9289-01</NDC11Code>
<ProductNDC>0143-9289</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol Valerate</ProprietaryName>
<NonProprietaryName>Estradiol Valerate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20200421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203723</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ESTRADIOL VALERATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .</IndicationAndUsage>
<Description>Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3 MW 356.50.</Description>
</NDC>
<NDC>
<NDCCode>0143-9290-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0143-9290-01) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9290-01</NDC11Code>
<ProductNDC>0143-9290</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol Valerate</ProprietaryName>
<NonProprietaryName>Estradiol Valerate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20200421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203723</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ESTRADIOL VALERATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .</IndicationAndUsage>
<Description>Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3 MW 356.50.</Description>
</NDC>
<NDC>
<NDCCode>0143-9291-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0143-9291-01) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>00143-9291-01</NDC11Code>
<ProductNDC>0143-9291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol Valerate</ProprietaryName>
<NonProprietaryName>Estradiol Valerate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20200421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203723</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ESTRADIOL VALERATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .</IndicationAndUsage>
<Description>Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3 MW 356.50.</Description>
</NDC>
<NDC>
<NDCCode>0338-0673-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0673-04) </PackageDescription>
<NDC11Code>00338-0673-04</NDC11Code>
<ProductNDC>0338-0673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose And Sodium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride, Dextrose Monohydrate And Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19790202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018008</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>224; 5; 450</StrengthNumber>
<StrengthUnit>mg/100mL; g/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19790202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride in Dextrose and Sodium Chloride Injection is indicated as a source of water, electrolytes and calories.</IndicationAndUsage>
<Description>Potassium Chloride in Dextrose and Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment and caloric supply in a single dose container for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. Dextrose is derived from corn. The VIAFLEX Plus plastic container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). VIAFLEX Plus on the container indicates the presence of a drug additive in a drug vehicle. The VIAFLEX Plus plastic container system utilizes the same container as the VIAFLEX plastic container system. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0338-0685-04</NDCCode>
<PackageDescription>1000 mL in 1 BAG (0338-0685-04)</PackageDescription>
<NDC11Code>00338-0685-04</NDC11Code>
<ProductNDC>0338-0685</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride In Dextrose</ProprietaryName>
<NonProprietaryName>Potassium Chloride And Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19790201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017634</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>5; 224</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-12-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>0404-9936-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 BAG (0404-9936-10) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00404-9936-10</NDC11Code>
<ProductNDC>0404-9936</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088901</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>meq/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride for Injection Concentrate, USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible.</IndicationAndUsage>
<Description>Potassium Chloride for Injection Concentrate, USP is a sterile, nonpyrogenic concentrated solution of Potassium Chloride, USP in Water for Injection to be administered by intravenous infusion only after dilution in a larger volume of fluid. Each mL of Potassium Chloride for Injection Concentrate contains 2 mEq of K+ and Cl– equivalent to 149 mg of potassium chloride and has an osmolarity of 4000 mOsmol/L (calc). A more concentrated Potassium Chloride for Injection Concentrate is also available. Each mL of this injection contains 3 mEq of K+ and Cl– equivalent to 224 mg of potassium chloride and has an osmolarity of 6000 mOsmol/L(calc). pH (4.0-8.0) may have been adjusted with hydrochloric acid and if necessary, potassium hydroxide. Some packages are intended for multiple dose use and contain preservatives (0.05% methylparaben and 0.005% propylparaben). A summary of the available products is presented in the HOW SUPPLIED section. Potassium Chloride for Injection Concentrate (appropriately diluted) is a parenteral fluid and electrolyte replenisher.</Description>
</NDC>
<NDC>
<NDCCode>0404-9936-20</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 BAG (0404-9936-20) / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00404-9936-20</NDC11Code>
<ProductNDC>0404-9936</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088901</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>meq/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Chloride for Injection Concentrate, USP is indicated in the treatment of potassium deficiency states when oral replacement is not feasible.</IndicationAndUsage>
<Description>Potassium Chloride for Injection Concentrate, USP is a sterile, nonpyrogenic concentrated solution of Potassium Chloride, USP in Water for Injection to be administered by intravenous infusion only after dilution in a larger volume of fluid. Each mL of Potassium Chloride for Injection Concentrate contains 2 mEq of K+ and Cl– equivalent to 149 mg of potassium chloride and has an osmolarity of 4000 mOsmol/L (calc). A more concentrated Potassium Chloride for Injection Concentrate is also available. Each mL of this injection contains 3 mEq of K+ and Cl– equivalent to 224 mg of potassium chloride and has an osmolarity of 6000 mOsmol/L(calc). pH (4.0-8.0) may have been adjusted with hydrochloric acid and if necessary, potassium hydroxide. Some packages are intended for multiple dose use and contain preservatives (0.05% methylparaben and 0.005% propylparaben). A summary of the available products is presented in the HOW SUPPLIED section. Potassium Chloride for Injection Concentrate (appropriately diluted) is a parenteral fluid and electrolyte replenisher.</Description>
</NDC>
<NDC>
<NDCCode>0409-0032-01</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-0032-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-0032-10) </PackageDescription>
<NDC11Code>00409-0032-01</NDC11Code>
<ProductNDC>0409-0032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphates</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217459</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MONOBASIC POTASSIUM PHOSPHATE; DIBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Compounds [CS], Potassium Salt [EPC], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection is indicated as a source of phosphorus: : 1 in intravenous fluids to correct hypophosphatemia in adults and pediatric patients when oral or enteral replacement is not possible, insufficient or contraindicated. , 2 for parenteral nutrition in adults and pediatric patients when oral or enteral nutrition is not possible, insufficient or contraindicated. .</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP, a phosphorus replacement product containing phosphorus 3 mmol/mL and potassium 4.4 mEq/mL. It is a sterile, non-pyrogenic, concentrated solution containing a mixture of monobasic potassium phosphate and dibasic potassium phosphate in water for injection. It is supplied as 15 mL single-dose vials. Monobasic Potassium Phosphate is chemically designated KH2PO4, molecular weight 136.09, white, odorless crystals or granules freely soluble in water. Dibasic Potassium Phosphate is chemically designated K2HPO4, molecular weight 174.18, colorless or white granular salt freely soluble in water. Each mL contains 224 mg of monobasic potassium phosphate and 236 mg of dibasic potassium phosphate. Each mL contains 3 mmol phosphorus (equivalent to 93 mg phosphorus) and 4.4 mEq potassium (equivalent to 170 mg of potassium). Note: 1 mmol of phosphorus is equal to 1 mmol phosphate. The pH is 6.0 to 7.0. This product contains no more than 900 mcg/L of aluminum [see Warnings and Precautions (5.5)]. The osmolarity is 7.4 mOsmol/mL (calc). The solution is administered after dilution or admixing by the intravenous route.</Description>
</NDC>
<NDC>
<NDCCode>0409-7295-01</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-7295-01) / 15 mL in 1 VIAL, SINGLE-DOSE (0409-7295-11) </PackageDescription>
<NDC11Code>00409-7295-01</NDC11Code>
<ProductNDC>0409-7295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic And Potassium Phosphate, Dibasic</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050826</StartMarketingDate>
<EndMarketingDate>20260201</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DIBASIC POTASSIUM PHOSPHATE; MONOBASIC POTASSIUM PHOSPHATE</SubstanceName>
<StrengthNumber>236; 224</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20050826</StartMarketingDatePackage>
<EndMarketingDatePackage>20260201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of potassium (K+ 4.4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions. Safety has not been established for parenteral nutrition in pediatric patients due to the risk of aluminum toxicity. (See WARNINGS).</IndicationAndUsage>
<Description>Potassium Phosphates Injection, USP 3 mM P/mL (millimoles/mL) is a sterile, nonpyrogenic, concentrated solution containing a mixture of mono- and dibasic potassium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each milliliter contains 224 mg of monobasic potassium phosphate, anhydrous and 236 mg of dibasic potassium phosphate, anhydrous. One mM of phosphorus weighs 31 mg and the product provides 93 mg (approximately 3 mM) of phosphorus/mL, plus 170.3 mg (4.4 mEq) of potassium/mL. Note: 1 mM P=1 mM PO4. It contains no bacteriostat, antimicrobial agent or added buffer. The osmolar concentration is 7.4 mOsmol/mL (calc.). The solution is intended as an alternative to sodium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. Monobasic Potassium Phosphate, NF (monopotassium phosphate), anhydrous is chemically designated KH2PO4, colorless crystals or white granular powder freely soluble in water. Dibasic Potassium Phosphate, USP (dipotassium phosphate), anhydrous is chemically designated K2HPO4, white granules very soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>0409-7295-17</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (0409-7295-17) > 15 mL in 1 VIAL, SINGLE-DOSE (0409-7295-27)</PackageDescription>
<NDC11Code>00409-7295-17</NDC11Code>
<ProductNDC>0409-7295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Phosphates</ProprietaryName>
<NonProprietaryName>Potassium Phosphate, Monobasic And Potassium Phosphate, Dibasic</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>POTASSIUM PHOSPHATE, MONOBASIC; POTASSIUM PHOSPHATE, DIBASIC</SubstanceName>
<StrengthNumber>224; 236</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [Chemical/Ingredient],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-08-23</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
</NDCList>