{
"NDC": [
{
"NDCCode": "69097-369-32",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (69097-369-32) > 2 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "69097-0369-32",
"ProductNDC": "69097-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Docetaxel Anhydrous",
"NonProprietaryName": "Docetaxel Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180824",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209634",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "DOCETAXEL ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Microtubule Inhibition [PE],Microtubule Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180824",
"SamplePackage": "N"
},
{
"NDCCode": "31722-369-32",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (31722-369-32) / 10 mL in 1 VIAL, MULTI-DOSE (31722-369-10) ",
"NDC11Code": "31722-0369-32",
"ProductNDC": "31722-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20250227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218746",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250227",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide USP 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 to 7.8 with sodium hydroxide. Chemically, bumetanide USP is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a white crystalline powder having a molecular weight of 364.42, soluble in alkaline solutions, acetone, methanol and ethanol (96%), slightly soluble in chloroform and very slightly soluble in water and hexane, and the following structural formula."
},
{
"NDCCode": "42571-369-11",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (42571-369-11) / 10 TABLET in 1 BLISTER PACK (42571-369-32) ",
"NDC11Code": "42571-0369-11",
"ProductNDC": "42571-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Roflumilast",
"NonProprietaryName": "Roflumilast",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208180",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "ROFLUMILAST",
"StrengthNumber": "250",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Phosphodiesterase 4 Inhibitor [EPC], Phosphodiesterase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230501",
"SamplePackage": "N",
"IndicationAndUsage": "Roflumilast tablets are indicated as a treatment to reduce the risk of COPD exacerbations in patients with severe COPD associated with chronic bronchitis and a history of exacerbations. Limitations of Use. Roflumilast tablet is not a bronchodilator and is not indicated for the relief of acute bronchospasm. Roflumilast tablet 250 mcg is a starting dose, for the first 4 weeks of treatment only and is not the effective (therapeutic) dose.",
"Description": "The active ingredient in roflumilast tablets is roflumilast. Roflumilast and its active metabolite (roflumilast N-oxide) are selective phosphodiesterase 4 (PDE4) inhibitors. The chemical name of roflumilast is N-(3,5-dichloropyridin-4-yl)-3-cyclopropylmethoxy-4-difluoromethoxy-benzamide. Its molecular formula is C 17H 14Cl 2F 2N 2O 3and the molecular weight is 403.22. The chemical structure is:. The drug substance is a white to off-white non-hygroscopic powder with a melting point of 160°C. It is practically insoluble in water and hexane, sparingly soluble in ethanol and freely soluble in acetone. Roflumilast tablets are supplied as white to off white colored, round shaped, flat face, beveled edge, uncoated tablets, debossed with ‘0.25’ or ‘0.5’ on one face and plain on other face. Each tablet contains 250 mcg or 500 mcg of roflumilast. Each tablet of roflumilast for oral administration contains the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and maize starch."
},
{
"NDCCode": "55301-369-27",
"PackageDescription": "1 BOTTLE in 1 CARTON (55301-369-27) > 32 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "55301-0369-27",
"ProductNDC": "55301-369",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Menstrual Relief",
"ProprietaryNameSuffix": "Maximum Strength",
"NonProprietaryName": "Acetaminophen, Pamabrom, Pyrilamine Maleate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20000620",
"EndMarketingDate": "20190119",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "ARMY AND AIR FORCE EXCHANGE SERVICE",
"SubstanceName": "ACETAMINOPHEN; PAMABROM; PYRILAMINE MALEATE",
"StrengthNumber": "500; 25; 15",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-01-22",
"ProductNdcExcludeFlag": "N"
},
{
"NDCCode": "55910-153-32",
"PackageDescription": "369.7 mL in 1 BOTTLE, PLASTIC (55910-153-32) ",
"NDC11Code": "55910-0153-32",
"ProductNDC": "55910-153",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Simply Clean Dandruff",
"NonProprietaryName": "Pyrithione Zinc",
"DosageFormName": "SHAMPOO",
"RouteName": "TOPICAL",
"StartMarketingDate": "19950215",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "Old East Main Co.",
"SubstanceName": "PYRITHIONE ZINC",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19950215",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent recurrence of flaking and itching associated with dandruff."
},
{
"NDCCode": "55910-311-32",
"PackageDescription": "369.7 mL in 1 BOTTLE, PLASTIC (55910-311-32) ",
"NDC11Code": "55910-0311-32",
"ProductNDC": "55910-311",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "2 In 1 Dandruff",
"NonProprietaryName": "Pyrithione Zinc",
"DosageFormName": "SHAMPOO",
"RouteName": "TOPICAL",
"StartMarketingDate": "20050623",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "Old East Main Co.",
"SubstanceName": "PYRITHIONE ZINC",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050623",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent recurrence of flaking and itching associated with dandruff."
},
{
"NDCCode": "55910-369-27",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (55910-369-27) > 32 TABLET, FILM COATED in 1 BOTTLE, GLASS",
"NDC11Code": "55910-0369-27",
"ProductNDC": "55910-369",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Menstrual Pain Relief",
"NonProprietaryName": "Acetaminophen, Pamabrom And Pyrilamine Maleate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20000620",
"EndMarketingDate": "20181101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "DOLGENCORP, LLC",
"SubstanceName": "ACETAMINOPHEN; PAMABROM; PYRILAMINE MALEATE",
"StrengthNumber": "500; 25; 15",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-11-02",
"ProductNdcExcludeFlag": "N"
},
{
"NDCCode": "55910-496-32",
"PackageDescription": "369.7 mL in 1 BOTTLE, PLASTIC (55910-496-32) ",
"NDC11Code": "55910-0496-32",
"ProductNDC": "55910-496",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "2 In 1 Dandruff",
"NonProprietaryName": "Pyrithione Zinc",
"DosageFormName": "SHAMPOO",
"RouteName": "TOPICAL",
"StartMarketingDate": "20211007",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "Old East Main Co.",
"SubstanceName": "PYRITHIONE ZINC",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211007",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent recurrence of flaking and itching associated with dandruff."
},
{
"NDCCode": "55910-921-32",
"PackageDescription": "369.7 mL in 1 BOTTLE, PLASTIC (55910-921-32) ",
"NDC11Code": "55910-0921-32",
"ProductNDC": "55910-921",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "2 In 1 Dandruff",
"NonProprietaryName": "Pyrithione Zinc",
"DosageFormName": "SHAMPOO",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230106",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "Old East Main Co.",
"SubstanceName": "PYRITHIONE ZINC",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230106",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent recurrence of flaking and itching associated with dandruff."
},
{
"NDCCode": "85922-369-32",
"PackageDescription": "5 BOTTLE in 1 BOX (85922-369-32) / 1 CREAM in 1 BOTTLE",
"NDC11Code": "85922-0369-32",
"ProductNDC": "85922-369",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Plongtui Genital Warts Remover",
"NonProprietaryName": "Plongtui Genital Warts Remover",
"DosageFormName": "CREAM",
"RouteName": "CUTANEOUS",
"StartMarketingDate": "20250708",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Guangzhou Jingze Jiexin Electronics Co Ltd",
"SubstanceName": "CHLORHEXIDINE; SALICYLIC ACID",
"StrengthNumber": "1; 1",
"StrengthUnit": "g/1; g/1",
"Pharm_Classes": "Decreased Cell Wall Integrity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250708",
"SamplePackage": "N",
"IndicationAndUsage": "Genital Warts Remover."
},
{
"NDCCode": "69097-027-50",
"PackageDescription": "1 KIT in 1 CARTON (69097-027-50) * 1 mL in 1 VIAL, GLASS (69097-028-32) * 1 mL in 1 SYRINGE, GLASS (69097-029-31) ",
"NDC11Code": "69097-0027-50",
"ProductNDC": "69097-027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glucagon",
"NonProprietaryName": "Glucagon",
"DosageFormName": "KIT",
"StartMarketingDate": "20251008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218813",
"LabelerName": "Cipla USA Inc.",
"Status": "Active",
"LastUpdate": "2025-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Glucagon for injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. (1.1), 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. (1.2).",
"Description": "Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is synthesized by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons. The empirical formula is C153H225N43O49S. The primary sequence of glucagon is shown below. Crystalline glucagon is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2."
},
{
"NDCCode": "69097-168-53",
"PackageDescription": "30 POUCH in 1 CARTON (69097-168-53) / 1 VIAL, SINGLE-DOSE in 1 POUCH (69097-168-32) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "69097-0168-53",
"ProductNDC": "69097-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arformoterol Tartrate",
"NonProprietaryName": "Arformoterol Tartrate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207306",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "ARFORMOTEROL TARTRATE",
"StrengthNumber": "15",
"StrengthUnit": "ug/2mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220127",
"SamplePackage": "N",
"IndicationAndUsage": "Arformoterol tartrate inhalation solution is a long-acting beta2-adrenergic agonist (beta2-agonist) indicated for: : 1 Long-term, twice daily (morning and evening) administration in the maintenance treatment of bronchoconstriction in patients with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. (1.1).",
"Description": "Arformoterol tartrate inhalation solution is a sterile, clear, colorless, aqueous solution of the tartrate salt of arformoterol, the (R,R)-enantiomer of formoterol. Arformoterol is a selective beta2-adrenergic bronchodilator. The chemical name for arformoterol tartrate is formamide, N-[2-hydroxy-5-[(1R)-1-hydroxy-2-[[(1R)-2(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]-, (2R,3R)-2,3-dihydroxybutanedioate (1:1 salt), and its established structural formula is as follows. The molecular weight of arformoterol tartrate is 494.5 g/mol, and its empirical formula is C19H24N2O4C4H6O6 (1:1 salt). It is a white to off-white solid that is slightly soluble in water. Arformoterol tartrate is the United States Adopted Name (USAN) for (R,R)-formoterol L-tartrate. Arformoterol tartrate inhalation solution is supplied as 2 mL of arformoterol tartrate solution packaged in 2.1 mL unit-dose, low-density polyethylene (LDPE) unit-dose vials. Each unit-dose vial contains 15 mcg of arformoterol (equivalent to 22 mcg of arformoterol tartrate) in a sterile, isotonic saline solution, pH-adjusted to 5.0 with citric acid and sodium citrate. Arformoterol tartrate inhalation solution requires no dilution before administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend upon patient factors, the nebulizer used, and compressor performance. Using the PARI LC®Plus nebulizer (with mouthpiece) connected to a PARI DURA NEBTM3000 compressor under in vitro conditions, the mean delivered dose from the mouthpiece (% nominal) was approximately 4.1 mcg (27.6%) at a mean flow rate of 3.3 L/min. The mean nebulization time was 6 minutes or less. Arformoterol tartrate inhalation solution should be administered from a standard jet nebulizer at adequate flow rates via face mask or mouthpiece. Patients should be carefully instructed on the correct use of this drug product (please refer to the accompanying Patient Information)."
},
{
"NDCCode": "69097-318-53",
"PackageDescription": "30 POUCH in 1 CARTON (69097-318-53) / 1 AMPULE in 1 POUCH (69097-318-32) / 2 mL in 1 AMPULE",
"NDC11Code": "69097-0318-53",
"ProductNDC": "69097-318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"ProprietaryNameSuffix": "Inhalation Suspension",
"NonProprietaryName": "Budesonide",
"DosageFormName": "INHALANT",
"RouteName": "ORAL",
"StartMarketingDate": "20171116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205710",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201015",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide inhalation suspension is an inhaled corticosteroid indicated for:. Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "69097-319-53",
"PackageDescription": "30 POUCH in 1 CARTON (69097-319-53) / 1 AMPULE in 1 POUCH (69097-319-32) / 2 mL in 1 AMPULE",
"NDC11Code": "69097-0319-53",
"ProductNDC": "69097-319",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"ProprietaryNameSuffix": "Inhalation Suspension",
"NonProprietaryName": "Budesonide",
"DosageFormName": "INHALANT",
"RouteName": "ORAL",
"StartMarketingDate": "20171116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205710",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200410",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide inhalation suspension is an inhaled corticosteroid indicated for:. Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "69097-321-53",
"PackageDescription": "30 POUCH in 1 CARTON (69097-321-53) / 1 AMPULE in 1 POUCH (69097-321-32) / 2 mL in 1 AMPULE",
"NDC11Code": "69097-0321-53",
"ProductNDC": "69097-321",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide",
"ProprietaryNameSuffix": "Inhalation Suspension",
"NonProprietaryName": "Budesonide",
"DosageFormName": "INHALANT",
"RouteName": "ORAL",
"StartMarketingDate": "20171116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205710",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200410",
"SamplePackage": "N",
"IndicationAndUsage": "Budesonide inhalation suspension is an inhaled corticosteroid indicated for:. Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).",
"Description": "Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)]."
},
{
"NDCCode": "69097-532-32",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (69097-532-32) > 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "69097-0532-32",
"ProductNDC": "69097-532",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Nitroprusside",
"NonProprietaryName": "Sodium Nitroprusside",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210855",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "SODIUM NITROPRUSSIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Vasodilation [PE], Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180716",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium nitroprusside is indicated for the immediate reduction of blood pressure of adult and pediatric patients in hypertensive crises. Concomitant longer-acting antihypertensive medication should be administered so that the duration of treatment with sodium nitroprusside can be minimized. Sodium nitroprusside is also indicated for producing controlled hypotension in order to reduce bleeding during surgery. Sodium nitroprusside is also indicated for the treatment of acute congestive heart failure.",
"Description": "Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. whose molecular formula is Na2[Fe(CN)5NO] 2H2O, and whose molecular weight is 297.95. Dry sodium nitroprusside is a light-brown to reddish-brown crystals or powder, freely soluble in water. In an aqueous solution infused intravenously, sodium nitroprusside is a rapid-acting vasodilator, active on both arteries and veins. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes. (See DOSAGE AND ADMINISTRATION section.) The solution is also sensitive to certain wavelengths of light, and it must be protected from light in clinical use. Sodium nitroprusside injection is available as. 50 mg single-dose vial – Each 2 mL vial contains the equivalent of 50 mg sodium nitroprusside dihydrate in sterile water for injection."
},
{
"NDCCode": "69097-770-32",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (69097-770-32) / 2 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "69097-0770-32",
"ProductNDC": "69097-770",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcitonin Salmon",
"NonProprietaryName": "Calcitonin Salmon",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20241025",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213766",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "CALCITONIN SALMON",
"StrengthNumber": "200",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Calcitonin [CS], Calcitonin [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241025",
"SamplePackage": "N",
"IndicationAndUsage": "Calcitonin salmon injection is a calcitonin, indicated for the following conditions: : 1 Treatment of symptomatic Paget's disease of bone when alternative treatments are not suitable (1.1), 2 Treatment of hypercalcemia (1.2), 3 Treatment of postmenopausal osteoporosis when alternative treatments are not suitable. Fracture reduction efficacy has not been demonstrated (1.3).",
"Description": "Calcitonin is a polypeptide hormone secreted by the parafollicular cells of the thyroid gland in mammals and by the ultimobranchial gland of birds and fish. Calcitonin-salmon injection, Synthetic is a synthetic polypeptide of 32 amino acids in the same linear sequence that is found in calcitonin of salmon origin. This is shown by the following graphic formula. It is provided in sterile solution for subcutaneous or intramuscular injection. Each milliliter contains: calcitonin-salmon 200 USP Units. Inactive Ingredients (per mL): acetic acid, USP, 2.25 mg; phenol, USP, 5.0 mg; sodium acetate trihydrate, USP, 2.0 mg; sodium chloride, USP, 7.5 mg; water for injection, USP. The activity of calcitonin salmon injection is stated in International Units based on bioassay in comparison with the International Reference Preparation of calcitonin-salmon for Bioassay, distributed by the National Institute for Biological Standards and Control, Holly Hill, London."
},
{
"NDCCode": "69097-802-32",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (69097-802-32) / 1 mL in 1 VIAL, GLASS",
"NDC11Code": "69097-0802-32",
"ProductNDC": "69097-802",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Testosterone Cypionate",
"NonProprietaryName": "Testosterone Cypionate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20190326",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091244",
"LabelerName": "Cipla USA Inc.",
"SubstanceName": "TESTOSTERONE CYPIONATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190326",
"SamplePackage": "N",
"IndicationAndUsage": "Testosterone Cypionate Injection, USP is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency or absence of endogenous testosterone. : 1 Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy., 2 Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation.",
"Description": "Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17β)-. Its molecular formula is C27H40O3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains."
},
{
"NDCCode": "69097-909-50",
"PackageDescription": "1 KIT in 1 CARTON (69097-909-50) * 2 mL in 1 VIAL, SINGLE-DOSE (69097-950-32) * 2 mL in 1 SYRINGE (69097-960-31) ",
"NDC11Code": "69097-0909-50",
"ProductNDC": "69097-909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leuprolide Acetate Depot",
"NonProprietaryName": "Leuprolide Acetate",
"DosageFormName": "KIT",
"StartMarketingDate": "20220715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205054",
"LabelerName": "CIPLA USA INC.",
"Status": "Active",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220715",
"SamplePackage": "N",
"IndicationAndUsage": "LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration (leuprolide acetate) is indicated for treatment of advanced prostate cancer.",
"Description": "Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin-releasing hormone (GnRH). The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. Where: n=1 or 2. Leuprolide acetate has a molecular weight of 1209.41 as free base”. Leuprolide is freely soluble in water. LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration is available in a vial containing white to off white sterile lyophilized microspheres together with the corresponding sterile reconstitution diluent in a pre-filled syringe. When LEUPROLIDE ACETATE FOR DEPOT SUSPENSION and the diluent are mixed together they become a suspension intended as an intramuscular injection to be given ONCE EVERY 12 WEEKS as a single dose. Each vial of LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration delivers leuprolide acetate (22.5 mg), polylactic acid (188.4 mg), triethylcitrate (10.4 mg), polysorbate 80 (3.8 mg), mannitol (88.4 mg) and carmellose sodium (25 mg). The prefilled syringe containing the clear reconstitution diluent (2 mL) contains mannitol (16 mg), water for injections, and sodium hydroxide and hydrochloric acid to control pH. Leuprolide acetate for depot suspension is an extended release sterile, single dose injection in suspension form for intramuscular administration."
},
{
"NDCCode": "85766-043-01",
"PackageDescription": "1 KIT in 1 CARTON (85766-043-01) * 1 mL in 1 VIAL, GLASS (69097-028-32) * 1 mL in 1 SYRINGE, GLASS (69097-029-31) ",
"NDC11Code": "85766-0043-01",
"ProductNDC": "85766-043",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glucagon",
"NonProprietaryName": "Glucagon",
"DosageFormName": "KIT",
"StartMarketingDate": "20251008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218813",
"LabelerName": "Sportpharm LLC",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260206",
"SamplePackage": "N",
"IndicationAndUsage": "Glucagon for injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. ( 1.1) , 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. ( 1.2) .",
"Description": "Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is synthesized by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons. The empirical formula is C 153H 225N 43O 49S. The primary sequence of glucagon is shown below. Crystalline glucagon is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2."
},
{
"NDCCode": "0378-6981-88",
"PackageDescription": "2 CARTON in 1 BOX (0378-6981-88) / 5 BLISTER PACK in 1 CARTON (0378-6981-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6981-32) ",
"NDC11Code": "00378-6981-88",
"ProductNDC": "0378-6981",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202396",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181129",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet."
},
{
"NDCCode": "0378-6982-88",
"PackageDescription": "2 CARTON in 1 BOX (0378-6982-88) / 5 BLISTER PACK in 1 CARTON (0378-6982-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6982-32) ",
"NDC11Code": "00378-6982-88",
"ProductNDC": "0378-6982",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202396",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181129",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet."
},
{
"NDCCode": "68382-369-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (68382-369-01) ",
"NDC11Code": "68382-0369-01",
"ProductNDC": "68382-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090459",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190103",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "68382-369-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (68382-369-06) ",
"NDC11Code": "68382-0369-06",
"ProductNDC": "68382-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090459",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190103",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "68382-369-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (68382-369-10) ",
"NDC11Code": "68382-0369-10",
"ProductNDC": "68382-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090459",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190103",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "68382-369-14",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (68382-369-14) ",
"NDC11Code": "68382-0369-14",
"ProductNDC": "68382-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090459",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190103",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "68382-369-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-369-77) > 10 TABLET, FILM COATED in 1 BLISTER PACK (68382-369-30) ",
"NDC11Code": "68382-0369-77",
"ProductNDC": "68382-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090459",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190103",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).",
"Description": "Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum."
},
{
"NDCCode": "71390-125-20",
"PackageDescription": "10 CARTON in 1 PACKAGE (71390-125-20) / 1 VIAL, SINGLE-DOSE in 1 CARTON (71390-125-21) / 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71390-0125-20",
"ProductNDC": "71390-125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Barhemsys",
"NonProprietaryName": "Amisulpride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200227",
"EndMarketingDate": "20301130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209510",
"LabelerName": "Acacia Pharma Ltd",
"SubstanceName": "AMISULPRIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200227",
"EndMarketingDatePackage": "20301130",
"SamplePackage": "N",
"IndicationAndUsage": "BARHEMSYS® is indicated in adults for: 1 prevention of postoperative nausea and vomiting (PONV), either alone or in combination with an antiemetic of a different class., 2 treatment of PONV in patients who have received antiemetic prophylaxis with an agent of a different class or have not received prophylaxis.",
"Description": "The active ingredient of BARHEMSYS is amisulpride, a dopamine-2 (D2) receptor antagonist. Its chemical name is 4-Amino-N-[(1-ethyl-2-pyrrolidinyl)methyl]-5-(ethylsulfonyl)-o-anisamide. It has the following chemical structure. The empirical formula is C17H27N3O4S representing a molecular weight of 369.48. Amisulpride is a white or almost white crystalline powder. It is practically insoluble in water, sparingly soluble in ethanol and freely soluble in methylene chloride, and has a melting point of around 126°C. The compound is racemic and shows no optical rotation and is not hygroscopic. No other polymorphs of amisulpride have been reported. BARHEMSYS (amisulpride) injection is a clear, colorless, nonpyrogenic, sterile solution formulation of amisulpride 5 mg/2 mL (2.5 mg/mL) or 10 mg/4 mL (2.5 mg/mL) for intravenous infusion presented in a single-dose vial. It has a pH of approximately 5.0 and the osmolality of the product is between 250 and 330 mOsmol/kg. Each 2 mL vial of BARHEMSYS contains 5 mg of amisulpride; 18.7 mg of citric acid monohydrate USP; 3.6 mg of sodium chloride USP; 32.64 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume. Each 4 mL vial of BARHEMSYS contains 10 mg of amisulpride; 37.4 mg of citric acid monohydrate USP; 7.2 mg of sodium chloride USP; 65.3 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume."
},
{
"NDCCode": "71390-125-50",
"PackageDescription": "10 CARTON in 1 PACKAGE (71390-125-50) / 1 VIAL, SINGLE-DOSE in 1 CARTON (71390-125-51) / 4 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "71390-0125-50",
"ProductNDC": "71390-125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Barhemsys",
"NonProprietaryName": "Amisulpride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200227",
"EndMarketingDate": "20301130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209510",
"LabelerName": "Acacia Pharma Ltd",
"SubstanceName": "AMISULPRIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200227",
"EndMarketingDatePackage": "20301130",
"SamplePackage": "N",
"IndicationAndUsage": "BARHEMSYS® is indicated in adults for: 1 prevention of postoperative nausea and vomiting (PONV), either alone or in combination with an antiemetic of a different class., 2 treatment of PONV in patients who have received antiemetic prophylaxis with an agent of a different class or have not received prophylaxis.",
"Description": "The active ingredient of BARHEMSYS is amisulpride, a dopamine-2 (D2) receptor antagonist. Its chemical name is 4-Amino-N-[(1-ethyl-2-pyrrolidinyl)methyl]-5-(ethylsulfonyl)-o-anisamide. It has the following chemical structure. The empirical formula is C17H27N3O4S representing a molecular weight of 369.48. Amisulpride is a white or almost white crystalline powder. It is practically insoluble in water, sparingly soluble in ethanol and freely soluble in methylene chloride, and has a melting point of around 126°C. The compound is racemic and shows no optical rotation and is not hygroscopic. No other polymorphs of amisulpride have been reported. BARHEMSYS (amisulpride) injection is a clear, colorless, nonpyrogenic, sterile solution formulation of amisulpride 5 mg/2 mL (2.5 mg/mL) or 10 mg/4 mL (2.5 mg/mL) for intravenous infusion presented in a single-dose vial. It has a pH of approximately 5.0 and the osmolality of the product is between 250 and 330 mOsmol/kg. Each 2 mL vial of BARHEMSYS contains 5 mg of amisulpride; 18.7 mg of citric acid monohydrate USP; 3.6 mg of sodium chloride USP; 32.64 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume. Each 4 mL vial of BARHEMSYS contains 10 mg of amisulpride; 37.4 mg of citric acid monohydrate USP; 7.2 mg of sodium chloride USP; 65.3 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume."
},
{
"NDCCode": "72205-369-91",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (72205-369-91) ",
"NDC11Code": "72205-0369-91",
"ProductNDC": "72205-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tapentadol Hydrochloride",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260903",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220865",
"LabelerName": "Novadoz Pharmaceuticals LLC",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260903",
"SamplePackage": "N",
"IndicationAndUsage": "Tapentadol tablets are indicated for the management of acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate in adults. Limitations of Use Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dose or duration [see Warnings and Precautions (5.1)], and persist over the course of therapy, reserve opioid analgesics, including tapentadol tablets for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.Pediatric use information is approved for Collegium Pharmaceutical, Inc.’s NUCYNTA tablets. However, due to Collegium Pharmaceutical, Inc.’s marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Tapentadol tablets are a mu-opioid receptor agonist, available in immediate-release film-coated tablets for oral administration, containing 58.24, 87.36 and 116.48 mg of tapentadol hydrochloride in each tablet strength, equivalent to 50, 75, and 100 mg of tapentadol free-base, respectively. The chemical name is (3-[(lR,2R)-3-(Dimethylamino)-1-ethyl-2-methylpropyl] phenol monohydrochloride) and it has the following chemical structure. The molecular weight of tapentadol hydrochloride is 257.8, and the molecular formula is C14H24ClNO. The n-octanol:water partition coefficient log P value is -1.32. The pKa value is 7.90. The inactive ingredients in tapentadol tablets include: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone. The film coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide and iron oxide red."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69097-369-32</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (69097-369-32) > 2 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>69097-0369-32</NDC11Code>
<ProductNDC>69097-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Docetaxel Anhydrous</ProprietaryName>
<NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180824</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209634</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE],Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180824</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>31722-369-32</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (31722-369-32) / 10 mL in 1 VIAL, MULTI-DOSE (31722-369-10) </PackageDescription>
<NDC11Code>31722-0369-32</NDC11Code>
<ProductNDC>31722-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20250227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218746</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide USP 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 to 7.8 with sodium hydroxide. Chemically, bumetanide USP is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a white crystalline powder having a molecular weight of 364.42, soluble in alkaline solutions, acetone, methanol and ethanol (96%), slightly soluble in chloroform and very slightly soluble in water and hexane, and the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>42571-369-11</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (42571-369-11) / 10 TABLET in 1 BLISTER PACK (42571-369-32) </PackageDescription>
<NDC11Code>42571-0369-11</NDC11Code>
<ProductNDC>42571-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Roflumilast</ProprietaryName>
<NonProprietaryName>Roflumilast</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208180</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>ROFLUMILAST</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 4 Inhibitor [EPC], Phosphodiesterase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Roflumilast tablets are indicated as a treatment to reduce the risk of COPD exacerbations in patients with severe COPD associated with chronic bronchitis and a history of exacerbations. Limitations of Use. Roflumilast tablet is not a bronchodilator and is not indicated for the relief of acute bronchospasm. Roflumilast tablet 250 mcg is a starting dose, for the first 4 weeks of treatment only and is not the effective (therapeutic) dose.</IndicationAndUsage>
<Description>The active ingredient in roflumilast tablets is roflumilast. Roflumilast and its active metabolite (roflumilast N-oxide) are selective phosphodiesterase 4 (PDE4) inhibitors. The chemical name of roflumilast is N-(3,5-dichloropyridin-4-yl)-3-cyclopropylmethoxy-4-difluoromethoxy-benzamide. Its molecular formula is C 17H 14Cl 2F 2N 2O 3and the molecular weight is 403.22. The chemical structure is:. The drug substance is a white to off-white non-hygroscopic powder with a melting point of 160°C. It is practically insoluble in water and hexane, sparingly soluble in ethanol and freely soluble in acetone. Roflumilast tablets are supplied as white to off white colored, round shaped, flat face, beveled edge, uncoated tablets, debossed with ‘0.25’ or ‘0.5’ on one face and plain on other face. Each tablet contains 250 mcg or 500 mcg of roflumilast. Each tablet of roflumilast for oral administration contains the following inactive ingredients: hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, and maize starch.</Description>
</NDC>
<NDC>
<NDCCode>55301-369-27</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (55301-369-27) > 32 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>55301-0369-27</NDC11Code>
<ProductNDC>55301-369</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Menstrual Relief</ProprietaryName>
<ProprietaryNameSuffix>Maximum Strength</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Pamabrom, Pyrilamine Maleate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000620</StartMarketingDate>
<EndMarketingDate>20190119</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>ARMY AND AIR FORCE EXCHANGE SERVICE</LabelerName>
<SubstanceName>ACETAMINOPHEN; PAMABROM; PYRILAMINE MALEATE</SubstanceName>
<StrengthNumber>500; 25; 15</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-01-22</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
</NDC>
<NDC>
<NDCCode>55910-153-32</NDCCode>
<PackageDescription>369.7 mL in 1 BOTTLE, PLASTIC (55910-153-32) </PackageDescription>
<NDC11Code>55910-0153-32</NDC11Code>
<ProductNDC>55910-153</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Simply Clean Dandruff</ProprietaryName>
<NonProprietaryName>Pyrithione Zinc</NonProprietaryName>
<DosageFormName>SHAMPOO</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19950215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>Old East Main Co.</LabelerName>
<SubstanceName>PYRITHIONE ZINC</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19950215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent recurrence of flaking and itching associated with dandruff.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55910-311-32</NDCCode>
<PackageDescription>369.7 mL in 1 BOTTLE, PLASTIC (55910-311-32) </PackageDescription>
<NDC11Code>55910-0311-32</NDC11Code>
<ProductNDC>55910-311</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>2 In 1 Dandruff</ProprietaryName>
<NonProprietaryName>Pyrithione Zinc</NonProprietaryName>
<DosageFormName>SHAMPOO</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20050623</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>Old East Main Co.</LabelerName>
<SubstanceName>PYRITHIONE ZINC</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent recurrence of flaking and itching associated with dandruff.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55910-369-27</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (55910-369-27) > 32 TABLET, FILM COATED in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>55910-0369-27</NDC11Code>
<ProductNDC>55910-369</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Menstrual Pain Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen, Pamabrom And Pyrilamine Maleate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000620</StartMarketingDate>
<EndMarketingDate>20181101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>DOLGENCORP, LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; PAMABROM; PYRILAMINE MALEATE</SubstanceName>
<StrengthNumber>500; 25; 15</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-11-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
</NDC>
<NDC>
<NDCCode>55910-496-32</NDCCode>
<PackageDescription>369.7 mL in 1 BOTTLE, PLASTIC (55910-496-32) </PackageDescription>
<NDC11Code>55910-0496-32</NDC11Code>
<ProductNDC>55910-496</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>2 In 1 Dandruff</ProprietaryName>
<NonProprietaryName>Pyrithione Zinc</NonProprietaryName>
<DosageFormName>SHAMPOO</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20211007</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>Old East Main Co.</LabelerName>
<SubstanceName>PYRITHIONE ZINC</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent recurrence of flaking and itching associated with dandruff.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55910-921-32</NDCCode>
<PackageDescription>369.7 mL in 1 BOTTLE, PLASTIC (55910-921-32) </PackageDescription>
<NDC11Code>55910-0921-32</NDC11Code>
<ProductNDC>55910-921</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>2 In 1 Dandruff</ProprietaryName>
<NonProprietaryName>Pyrithione Zinc</NonProprietaryName>
<DosageFormName>SHAMPOO</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230106</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>Old East Main Co.</LabelerName>
<SubstanceName>PYRITHIONE ZINC</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent recurrence of flaking and itching associated with dandruff.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>85922-369-32</NDCCode>
<PackageDescription>5 BOTTLE in 1 BOX (85922-369-32) / 1 CREAM in 1 BOTTLE</PackageDescription>
<NDC11Code>85922-0369-32</NDC11Code>
<ProductNDC>85922-369</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Plongtui Genital Warts Remover</ProprietaryName>
<NonProprietaryName>Plongtui Genital Warts Remover</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>CUTANEOUS</RouteName>
<StartMarketingDate>20250708</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Guangzhou Jingze Jiexin Electronics Co Ltd</LabelerName>
<SubstanceName>CHLORHEXIDINE; SALICYLIC ACID</SubstanceName>
<StrengthNumber>1; 1</StrengthNumber>
<StrengthUnit>g/1; g/1</StrengthUnit>
<Pharm_Classes>Decreased Cell Wall Integrity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Genital Warts Remover.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69097-027-50</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (69097-027-50) * 1 mL in 1 VIAL, GLASS (69097-028-32) * 1 mL in 1 SYRINGE, GLASS (69097-029-31) </PackageDescription>
<NDC11Code>69097-0027-50</NDC11Code>
<ProductNDC>69097-027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glucagon</ProprietaryName>
<NonProprietaryName>Glucagon</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218813</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glucagon for injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. (1.1), 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. (1.2).</IndicationAndUsage>
<Description>Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is synthesized by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons. The empirical formula is C153H225N43O49S. The primary sequence of glucagon is shown below. Crystalline glucagon is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2.</Description>
</NDC>
<NDC>
<NDCCode>69097-168-53</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (69097-168-53) / 1 VIAL, SINGLE-DOSE in 1 POUCH (69097-168-32) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>69097-0168-53</NDC11Code>
<ProductNDC>69097-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arformoterol Tartrate</ProprietaryName>
<NonProprietaryName>Arformoterol Tartrate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207306</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>ARFORMOTEROL TARTRATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>ug/2mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220127</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Arformoterol tartrate inhalation solution is a long-acting beta2-adrenergic agonist (beta2-agonist) indicated for: : 1 Long-term, twice daily (morning and evening) administration in the maintenance treatment of bronchoconstriction in patients with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. (1.1).</IndicationAndUsage>
<Description>Arformoterol tartrate inhalation solution is a sterile, clear, colorless, aqueous solution of the tartrate salt of arformoterol, the (R,R)-enantiomer of formoterol. Arformoterol is a selective beta2-adrenergic bronchodilator. The chemical name for arformoterol tartrate is formamide, N-[2-hydroxy-5-[(1R)-1-hydroxy-2-[[(1R)-2(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]-, (2R,3R)-2,3-dihydroxybutanedioate (1:1 salt), and its established structural formula is as follows. The molecular weight of arformoterol tartrate is 494.5 g/mol, and its empirical formula is C19H24N2O4C4H6O6 (1:1 salt). It is a white to off-white solid that is slightly soluble in water. Arformoterol tartrate is the United States Adopted Name (USAN) for (R,R)-formoterol L-tartrate. Arformoterol tartrate inhalation solution is supplied as 2 mL of arformoterol tartrate solution packaged in 2.1 mL unit-dose, low-density polyethylene (LDPE) unit-dose vials. Each unit-dose vial contains 15 mcg of arformoterol (equivalent to 22 mcg of arformoterol tartrate) in a sterile, isotonic saline solution, pH-adjusted to 5.0 with citric acid and sodium citrate. Arformoterol tartrate inhalation solution requires no dilution before administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend upon patient factors, the nebulizer used, and compressor performance. Using the PARI LC®Plus nebulizer (with mouthpiece) connected to a PARI DURA NEBTM3000 compressor under in vitro conditions, the mean delivered dose from the mouthpiece (% nominal) was approximately 4.1 mcg (27.6%) at a mean flow rate of 3.3 L/min. The mean nebulization time was 6 minutes or less. Arformoterol tartrate inhalation solution should be administered from a standard jet nebulizer at adequate flow rates via face mask or mouthpiece. Patients should be carefully instructed on the correct use of this drug product (please refer to the accompanying Patient Information).</Description>
</NDC>
<NDC>
<NDCCode>69097-318-53</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (69097-318-53) / 1 AMPULE in 1 POUCH (69097-318-32) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>69097-0318-53</NDC11Code>
<ProductNDC>69097-318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<ProprietaryNameSuffix>Inhalation Suspension</ProprietaryNameSuffix>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205710</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for:. Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>69097-319-53</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (69097-319-53) / 1 AMPULE in 1 POUCH (69097-319-32) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>69097-0319-53</NDC11Code>
<ProductNDC>69097-319</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<ProprietaryNameSuffix>Inhalation Suspension</ProprietaryNameSuffix>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205710</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for:. Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>69097-321-53</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (69097-321-53) / 1 AMPULE in 1 POUCH (69097-321-32) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>69097-0321-53</NDC11Code>
<ProductNDC>69097-321</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide</ProprietaryName>
<ProprietaryNameSuffix>Inhalation Suspension</ProprietaryNameSuffix>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205710</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for:. Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).</IndicationAndUsage>
<Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>69097-532-32</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (69097-532-32) > 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>69097-0532-32</NDC11Code>
<ProductNDC>69097-532</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Nitroprusside</ProprietaryName>
<NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210855</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium nitroprusside is indicated for the immediate reduction of blood pressure of adult and pediatric patients in hypertensive crises. Concomitant longer-acting antihypertensive medication should be administered so that the duration of treatment with sodium nitroprusside can be minimized. Sodium nitroprusside is also indicated for producing controlled hypotension in order to reduce bleeding during surgery. Sodium nitroprusside is also indicated for the treatment of acute congestive heart failure.</IndicationAndUsage>
<Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. whose molecular formula is Na2[Fe(CN)5NO] 2H2O, and whose molecular weight is 297.95. Dry sodium nitroprusside is a light-brown to reddish-brown crystals or powder, freely soluble in water. In an aqueous solution infused intravenously, sodium nitroprusside is a rapid-acting vasodilator, active on both arteries and veins. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes. (See DOSAGE AND ADMINISTRATION section.) The solution is also sensitive to certain wavelengths of light, and it must be protected from light in clinical use. Sodium nitroprusside injection is available as. 50 mg single-dose vial – Each 2 mL vial contains the equivalent of 50 mg sodium nitroprusside dihydrate in sterile water for injection.</Description>
</NDC>
<NDC>
<NDCCode>69097-770-32</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (69097-770-32) / 2 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>69097-0770-32</NDC11Code>
<ProductNDC>69097-770</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcitonin Salmon</ProprietaryName>
<NonProprietaryName>Calcitonin Salmon</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20241025</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213766</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>CALCITONIN SALMON</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Calcitonin [CS], Calcitonin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcitonin salmon injection is a calcitonin, indicated for the following conditions: : 1 Treatment of symptomatic Paget's disease of bone when alternative treatments are not suitable (1.1), 2 Treatment of hypercalcemia (1.2), 3 Treatment of postmenopausal osteoporosis when alternative treatments are not suitable. Fracture reduction efficacy has not been demonstrated (1.3).</IndicationAndUsage>
<Description>Calcitonin is a polypeptide hormone secreted by the parafollicular cells of the thyroid gland in mammals and by the ultimobranchial gland of birds and fish. Calcitonin-salmon injection, Synthetic is a synthetic polypeptide of 32 amino acids in the same linear sequence that is found in calcitonin of salmon origin. This is shown by the following graphic formula. It is provided in sterile solution for subcutaneous or intramuscular injection. Each milliliter contains: calcitonin-salmon 200 USP Units. Inactive Ingredients (per mL): acetic acid, USP, 2.25 mg; phenol, USP, 5.0 mg; sodium acetate trihydrate, USP, 2.0 mg; sodium chloride, USP, 7.5 mg; water for injection, USP. The activity of calcitonin salmon injection is stated in International Units based on bioassay in comparison with the International Reference Preparation of calcitonin-salmon for Bioassay, distributed by the National Institute for Biological Standards and Control, Holly Hill, London.</Description>
</NDC>
<NDC>
<NDCCode>69097-802-32</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (69097-802-32) / 1 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>69097-0802-32</NDC11Code>
<ProductNDC>69097-802</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Testosterone Cypionate</ProprietaryName>
<NonProprietaryName>Testosterone Cypionate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20190326</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091244</ApplicationNumber>
<LabelerName>Cipla USA Inc.</LabelerName>
<SubstanceName>TESTOSTERONE CYPIONATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Testosterone Cypionate Injection, USP is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency or absence of endogenous testosterone. : 1 Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy., 2 Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation.</IndicationAndUsage>
<Description>Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17β)-. Its molecular formula is C27H40O3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains.</Description>
</NDC>
<NDC>
<NDCCode>69097-909-50</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (69097-909-50) * 2 mL in 1 VIAL, SINGLE-DOSE (69097-950-32) * 2 mL in 1 SYRINGE (69097-960-31) </PackageDescription>
<NDC11Code>69097-0909-50</NDC11Code>
<ProductNDC>69097-909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leuprolide Acetate Depot</ProprietaryName>
<NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20220715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205054</ApplicationNumber>
<LabelerName>CIPLA USA INC.</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration (leuprolide acetate) is indicated for treatment of advanced prostate cancer.</IndicationAndUsage>
<Description>Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin-releasing hormone (GnRH). The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. Where: n=1 or 2. Leuprolide acetate has a molecular weight of 1209.41 as free base”. Leuprolide is freely soluble in water. LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration is available in a vial containing white to off white sterile lyophilized microspheres together with the corresponding sterile reconstitution diluent in a pre-filled syringe. When LEUPROLIDE ACETATE FOR DEPOT SUSPENSION and the diluent are mixed together they become a suspension intended as an intramuscular injection to be given ONCE EVERY 12 WEEKS as a single dose. Each vial of LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration delivers leuprolide acetate (22.5 mg), polylactic acid (188.4 mg), triethylcitrate (10.4 mg), polysorbate 80 (3.8 mg), mannitol (88.4 mg) and carmellose sodium (25 mg). The prefilled syringe containing the clear reconstitution diluent (2 mL) contains mannitol (16 mg), water for injections, and sodium hydroxide and hydrochloric acid to control pH. Leuprolide acetate for depot suspension is an extended release sterile, single dose injection in suspension form for intramuscular administration.</Description>
</NDC>
<NDC>
<NDCCode>85766-043-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (85766-043-01) * 1 mL in 1 VIAL, GLASS (69097-028-32) * 1 mL in 1 SYRINGE, GLASS (69097-029-31) </PackageDescription>
<NDC11Code>85766-0043-01</NDC11Code>
<ProductNDC>85766-043</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glucagon</ProprietaryName>
<NonProprietaryName>Glucagon</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218813</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glucagon for injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. ( 1.1) , 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. ( 1.2) .</IndicationAndUsage>
<Description>Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is synthesized by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons. The empirical formula is C 153H 225N 43O 49S. The primary sequence of glucagon is shown below. Crystalline glucagon is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2.</Description>
</NDC>
<NDC>
<NDCCode>0378-6981-88</NDCCode>
<PackageDescription>2 CARTON in 1 BOX (0378-6981-88) / 5 BLISTER PACK in 1 CARTON (0378-6981-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6981-32) </PackageDescription>
<NDC11Code>00378-6981-88</NDC11Code>
<ProductNDC>0378-6981</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202396</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet.</Description>
</NDC>
<NDC>
<NDCCode>0378-6982-88</NDCCode>
<PackageDescription>2 CARTON in 1 BOX (0378-6982-88) / 5 BLISTER PACK in 1 CARTON (0378-6982-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6982-32) </PackageDescription>
<NDC11Code>00378-6982-88</NDC11Code>
<ProductNDC>0378-6982</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202396</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet.</Description>
</NDC>
<NDC>
<NDCCode>68382-369-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (68382-369-01) </PackageDescription>
<NDC11Code>68382-0369-01</NDC11Code>
<ProductNDC>68382-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090459</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).</IndicationAndUsage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68382-369-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (68382-369-06) </PackageDescription>
<NDC11Code>68382-0369-06</NDC11Code>
<ProductNDC>68382-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090459</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).</IndicationAndUsage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68382-369-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (68382-369-10) </PackageDescription>
<NDC11Code>68382-0369-10</NDC11Code>
<ProductNDC>68382-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090459</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).</IndicationAndUsage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68382-369-14</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (68382-369-14) </PackageDescription>
<NDC11Code>68382-0369-14</NDC11Code>
<ProductNDC>68382-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090459</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).</IndicationAndUsage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>68382-369-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-369-77) > 10 TABLET, FILM COATED in 1 BLISTER PACK (68382-369-30) </PackageDescription>
<NDC11Code>68382-0369-77</NDC11Code>
<ProductNDC>68382-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090459</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine tablets are an atypical antipsychotic indicated:. As oral formulation for the: : 1 Treatment of schizophrenia. (1.1)Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6 week trials and one maintenance trial. (14.1)Adolescents (ages 13 to 17 years): Efficacy was established in one 6- week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1).</IndicationAndUsage>
<Description>Olanzapine is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, soluble in n-propanol, sparingly soluble in acetonitrile, slightly soluble in methanol and in dehydrated alcohol and practically insoluble in water. Olanzapine tablets are intended for oral administration only. Each olanzapine tablet intended for oral administration contains olanzapine equivalent to 2.5 mg (8 µmol) or 5 mg (16 µmol) or 7.5 mg (24 µmol) or 10 mg (32 µmol) or 15 mg (48 µmol) or 20 mg (64 µmol). In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, lecithin, magnesium stearate, talc, titanium dioxide and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>71390-125-20</NDCCode>
<PackageDescription>10 CARTON in 1 PACKAGE (71390-125-20) / 1 VIAL, SINGLE-DOSE in 1 CARTON (71390-125-21) / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71390-0125-20</NDC11Code>
<ProductNDC>71390-125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Barhemsys</ProprietaryName>
<NonProprietaryName>Amisulpride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200227</StartMarketingDate>
<EndMarketingDate>20301130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209510</ApplicationNumber>
<LabelerName>Acacia Pharma Ltd</LabelerName>
<SubstanceName>AMISULPRIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200227</StartMarketingDatePackage>
<EndMarketingDatePackage>20301130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BARHEMSYS® is indicated in adults for: 1 prevention of postoperative nausea and vomiting (PONV), either alone or in combination with an antiemetic of a different class., 2 treatment of PONV in patients who have received antiemetic prophylaxis with an agent of a different class or have not received prophylaxis.</IndicationAndUsage>
<Description>The active ingredient of BARHEMSYS is amisulpride, a dopamine-2 (D2) receptor antagonist. Its chemical name is 4-Amino-N-[(1-ethyl-2-pyrrolidinyl)methyl]-5-(ethylsulfonyl)-o-anisamide. It has the following chemical structure. The empirical formula is C17H27N3O4S representing a molecular weight of 369.48. Amisulpride is a white or almost white crystalline powder. It is practically insoluble in water, sparingly soluble in ethanol and freely soluble in methylene chloride, and has a melting point of around 126°C. The compound is racemic and shows no optical rotation and is not hygroscopic. No other polymorphs of amisulpride have been reported. BARHEMSYS (amisulpride) injection is a clear, colorless, nonpyrogenic, sterile solution formulation of amisulpride 5 mg/2 mL (2.5 mg/mL) or 10 mg/4 mL (2.5 mg/mL) for intravenous infusion presented in a single-dose vial. It has a pH of approximately 5.0 and the osmolality of the product is between 250 and 330 mOsmol/kg. Each 2 mL vial of BARHEMSYS contains 5 mg of amisulpride; 18.7 mg of citric acid monohydrate USP; 3.6 mg of sodium chloride USP; 32.64 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume. Each 4 mL vial of BARHEMSYS contains 10 mg of amisulpride; 37.4 mg of citric acid monohydrate USP; 7.2 mg of sodium chloride USP; 65.3 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume.</Description>
</NDC>
<NDC>
<NDCCode>71390-125-50</NDCCode>
<PackageDescription>10 CARTON in 1 PACKAGE (71390-125-50) / 1 VIAL, SINGLE-DOSE in 1 CARTON (71390-125-51) / 4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>71390-0125-50</NDC11Code>
<ProductNDC>71390-125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Barhemsys</ProprietaryName>
<NonProprietaryName>Amisulpride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200227</StartMarketingDate>
<EndMarketingDate>20301130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209510</ApplicationNumber>
<LabelerName>Acacia Pharma Ltd</LabelerName>
<SubstanceName>AMISULPRIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200227</StartMarketingDatePackage>
<EndMarketingDatePackage>20301130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BARHEMSYS® is indicated in adults for: 1 prevention of postoperative nausea and vomiting (PONV), either alone or in combination with an antiemetic of a different class., 2 treatment of PONV in patients who have received antiemetic prophylaxis with an agent of a different class or have not received prophylaxis.</IndicationAndUsage>
<Description>The active ingredient of BARHEMSYS is amisulpride, a dopamine-2 (D2) receptor antagonist. Its chemical name is 4-Amino-N-[(1-ethyl-2-pyrrolidinyl)methyl]-5-(ethylsulfonyl)-o-anisamide. It has the following chemical structure. The empirical formula is C17H27N3O4S representing a molecular weight of 369.48. Amisulpride is a white or almost white crystalline powder. It is practically insoluble in water, sparingly soluble in ethanol and freely soluble in methylene chloride, and has a melting point of around 126°C. The compound is racemic and shows no optical rotation and is not hygroscopic. No other polymorphs of amisulpride have been reported. BARHEMSYS (amisulpride) injection is a clear, colorless, nonpyrogenic, sterile solution formulation of amisulpride 5 mg/2 mL (2.5 mg/mL) or 10 mg/4 mL (2.5 mg/mL) for intravenous infusion presented in a single-dose vial. It has a pH of approximately 5.0 and the osmolality of the product is between 250 and 330 mOsmol/kg. Each 2 mL vial of BARHEMSYS contains 5 mg of amisulpride; 18.7 mg of citric acid monohydrate USP; 3.6 mg of sodium chloride USP; 32.64 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume. Each 4 mL vial of BARHEMSYS contains 10 mg of amisulpride; 37.4 mg of citric acid monohydrate USP; 7.2 mg of sodium chloride USP; 65.3 mg of trisodium citrate dihydrate; hydrochloric acid NF and sodium hydroxide NF as needed to adjust the pH (4.75 to 5.25); and Water for Injection USP to make up to volume.</Description>
</NDC>
<NDC>
<NDCCode>72205-369-91</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (72205-369-91) </PackageDescription>
<NDC11Code>72205-0369-91</NDC11Code>
<ProductNDC>72205-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tapentadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260903</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220865</ApplicationNumber>
<LabelerName>Novadoz Pharmaceuticals LLC</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tapentadol tablets are indicated for the management of acute pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate in adults. Limitations of Use Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dose or duration [see Warnings and Precautions (5.1)], and persist over the course of therapy, reserve opioid analgesics, including tapentadol tablets for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.Pediatric use information is approved for Collegium Pharmaceutical, Inc.’s NUCYNTA tablets. However, due to Collegium Pharmaceutical, Inc.’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Tapentadol tablets are a mu-opioid receptor agonist, available in immediate-release film-coated tablets for oral administration, containing 58.24, 87.36 and 116.48 mg of tapentadol hydrochloride in each tablet strength, equivalent to 50, 75, and 100 mg of tapentadol free-base, respectively. The chemical name is (3-[(lR,2R)-3-(Dimethylamino)-1-ethyl-2-methylpropyl] phenol monohydrochloride) and it has the following chemical structure. The molecular weight of tapentadol hydrochloride is 257.8, and the molecular formula is C14H24ClNO. The n-octanol:water partition coefficient log P value is -1.32. The pKa value is 7.90. The inactive ingredients in tapentadol tablets include: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone. The film coatings for all tablet strengths contain polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide and iron oxide red.</Description>
</NDC>
</NDCList>