RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>69097-532-32</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (69097-532-32)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>69097-0532-32</NDC11Code>
    <ProductNDC>69097-532</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Nitroprusside</ProprietaryName>
    <NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180716</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210855</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-12-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180716</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium nitroprusside is indicated for the immediate reduction of blood pressure of adult and pediatric patients in hypertensive crises. Concomitant longer-acting antihypertensive medication should be administered so that the duration of treatment with sodium nitroprusside can be minimized. Sodium nitroprusside is also indicated for producing controlled hypotension in order to reduce bleeding during surgery. Sodium nitroprusside is also indicated for the treatment of acute congestive heart failure.</IndicationAndUsage>
    <Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. whose molecular formula is Na2[Fe(CN)5NO]  2H2O, and whose molecular weight is 297.95. Dry sodium nitroprusside is a light-brown to reddish-brown crystals or powder, freely soluble in water. In an aqueous solution infused intravenously, sodium nitroprusside is a rapid-acting vasodilator, active on both arteries and veins. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes. (See DOSAGE AND ADMINISTRATION section.) The solution is also sensitive to certain wavelengths of light, and it must be protected from light in clinical use. Sodium nitroprusside injection is available as. 50 mg single-dose vial – Each 2 mL vial contains the equivalent of 50 mg sodium nitroprusside dihydrate in sterile water for injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>45802-532-32</NDCCode>
    <PackageDescription>1 CANISTER in 1 CARTON (45802-532-32)  / 50 g in 1 CANISTER</PackageDescription>
    <NDC11Code>45802-0532-32</NDC11Code>
    <ProductNDC>45802-532</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketoconazole</ProprietaryName>
    <NonProprietaryName>Ketoconazole</NonProprietaryName>
    <DosageFormName>AEROSOL, FOAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20110830</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091550</ApplicationNumber>
    <LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
    <SubstanceName>KETOCONAZOLE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 3A4 Inhibitors [MoA], Cytochrome P450 3A5 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110830</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ketoconazole foam, 2% is indicated for the topical treatment of seborrheic dermatitis in immunocompetent patients 12 years of age and older. Limitations of Use. Safety and efficacy of ketoconazole foam, 2% for treatment of fungal infections have not been established.</IndicationAndUsage>
    <Description>Ketoconazole foam, 2% contains 2% ketoconazole USP, an antifungal agent, in a thermolabile hydroethanolic foam for topical application. The chemical name for ketoconazole is piperazine, 1-acetyl-4-[4-[[2-(2,4-dichlorophenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-, cis- with the molecular formula C26H28Cl2N4O4 and a molecular weight of 531.43. The following is the chemical structure. Ketoconazole foam, 2% contains 20 mg ketoconazole per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol 58%, polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.</Description>
  </NDC>
  <NDC>
    <NDCCode>75270-532-32</NDCCode>
    <PackageDescription>946 mL in 1 BOTTLE, DISPENSING (75270-532-32) </PackageDescription>
    <NDC11Code>75270-0532-32</NDC11Code>
    <ProductNDC>75270-532</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Safety First Hand Sanitizer 70% Etoh</ProprietaryName>
    <NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>LifeTech Pharma, LLC</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>70.7</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>When using this product keep out of eyes. In case of contact, flush eyes with water.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>77335-001-32</NDCCode>
    <PackageDescription>.532 L in 1 BOTTLE (77335-001-32) </PackageDescription>
    <NDC11Code>77335-0001-32</NDC11Code>
    <ProductNDC>77335-001</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>W.r.lulus Rinse-free Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Ethanol</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200512</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Lulus import and export co., ltd</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>73.7</StrengthNumber>
    <StrengthUnit>L/100L</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2021-07-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200512</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hand sanitize to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>69097-027-50</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (69097-027-50)  *  1 mL in 1 VIAL, GLASS (69097-028-32)  *  1 mL in 1 SYRINGE, GLASS (69097-029-31) </PackageDescription>
    <NDC11Code>69097-0027-50</NDC11Code>
    <ProductNDC>69097-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glucagon</ProprietaryName>
    <NonProprietaryName>Glucagon</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20251008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218813</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-10-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glucagon for injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. (1.1), 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. (1.2).</IndicationAndUsage>
    <Description>Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is synthesized by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons. The empirical formula is C153H225N43O49S. The primary sequence of glucagon is shown below. Crystalline glucagon is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-168-53</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (69097-168-53)  / 1 VIAL, SINGLE-DOSE in 1 POUCH (69097-168-32)  / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>69097-0168-53</NDC11Code>
    <ProductNDC>69097-168</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Arformoterol Tartrate</ProprietaryName>
    <NonProprietaryName>Arformoterol Tartrate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20210622</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207306</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>ARFORMOTEROL TARTRATE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>ug/2mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Arformoterol tartrate inhalation solution is a long-acting beta2-adrenergic agonist (beta2-agonist) indicated for: : 1   Long-term, twice daily (morning and evening) administration in the maintenance treatment of bronchoconstriction in patients with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. (1.1).</IndicationAndUsage>
    <Description>Arformoterol tartrate inhalation solution is a sterile, clear, colorless, aqueous solution of the tartrate salt of arformoterol, the (R,R)-enantiomer of formoterol. Arformoterol is a selective beta2-adrenergic bronchodilator. The chemical name for arformoterol tartrate is formamide, N-[2-hydroxy-5-[(1R)-1-hydroxy-2-[[(1R)-2(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]-, (2R,3R)-2,3-dihydroxybutanedioate (1:1 salt), and its established structural formula is as follows. The molecular weight of arformoterol tartrate is 494.5 g/mol, and its empirical formula is C19H24N2O4C4H6O6 (1:1 salt). It is a white to off-white solid that is slightly soluble in water. Arformoterol tartrate is the United States Adopted Name (USAN) for (R,R)-formoterol L-tartrate. Arformoterol tartrate inhalation solution is supplied as 2 mL of arformoterol tartrate solution packaged in 2.1 mL unit-dose, low-density polyethylene (LDPE) unit-dose vials. Each unit-dose vial contains 15 mcg of arformoterol (equivalent to 22 mcg of arformoterol tartrate) in a sterile, isotonic saline solution, pH-adjusted to 5.0 with citric acid and sodium citrate. Arformoterol tartrate inhalation solution requires no dilution before administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend upon patient factors, the nebulizer used, and compressor performance. Using the PARI LC®Plus nebulizer (with mouthpiece) connected to a PARI DURA NEBTM3000 compressor under in vitro conditions, the mean delivered dose from the mouthpiece (% nominal) was approximately 4.1 mcg (27.6%) at a mean flow rate of 3.3 L/min. The mean nebulization time was 6 minutes or less. Arformoterol tartrate inhalation solution should be administered from a standard jet nebulizer at adequate flow rates via face mask or mouthpiece. Patients should be carefully instructed on the correct use of this drug product (please refer to the accompanying Patient Information).</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-318-53</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (69097-318-53)  / 1 AMPULE in 1 POUCH (69097-318-32)  / 2 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>69097-0318-53</NDC11Code>
    <ProductNDC>69097-318</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Budesonide</ProprietaryName>
    <ProprietaryNameSuffix>Inhalation Suspension</ProprietaryNameSuffix>
    <NonProprietaryName>Budesonide</NonProprietaryName>
    <DosageFormName>INHALANT</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20171116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205710</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>BUDESONIDE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201015</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for:.   Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).</IndicationAndUsage>
    <Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-319-53</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (69097-319-53)  / 1 AMPULE in 1 POUCH (69097-319-32)  / 2 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>69097-0319-53</NDC11Code>
    <ProductNDC>69097-319</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Budesonide</ProprietaryName>
    <ProprietaryNameSuffix>Inhalation Suspension</ProprietaryNameSuffix>
    <NonProprietaryName>Budesonide</NonProprietaryName>
    <DosageFormName>INHALANT</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20171116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205710</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>BUDESONIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for:.   Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).</IndicationAndUsage>
    <Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-321-53</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (69097-321-53)  / 1 AMPULE in 1 POUCH (69097-321-32)  / 2 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>69097-0321-53</NDC11Code>
    <ProductNDC>69097-321</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Budesonide</ProprietaryName>
    <ProprietaryNameSuffix>Inhalation Suspension</ProprietaryNameSuffix>
    <NonProprietaryName>Budesonide</NonProprietaryName>
    <DosageFormName>INHALANT</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20171116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205710</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>BUDESONIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Budesonide inhalation suspension is an inhaled corticosteroid indicated for:.   Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1). Limitations of Use:. Not indicated for the relief of acute bronchospasm (1).</IndicationAndUsage>
    <Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β, 16α, 17, 21-tetrahydroxypregna-1, 4-diene-3, 20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients disodium edetate, sodium chloride, sodium citrate dihydrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules (ampules): 0.25 mg, 0.5 mg, and 1 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-369-32</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (69097-369-32)  &gt; 2 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>69097-0369-32</NDC11Code>
    <ProductNDC>69097-369</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel Anhydrous</ProprietaryName>
    <NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180824</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209634</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE],Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-10-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180824</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>69097-770-32</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (69097-770-32)  / 2 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>69097-0770-32</NDC11Code>
    <ProductNDC>69097-770</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcitonin Salmon</ProprietaryName>
    <NonProprietaryName>Calcitonin Salmon</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20241025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213766</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>CALCITONIN SALMON</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Calcitonin [CS], Calcitonin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcitonin salmon injection is a calcitonin, indicated for the following conditions: : 1 Treatment of symptomatic Paget's disease of bone when alternative treatments are not suitable (1.1), 2 Treatment of hypercalcemia (1.2), 3 Treatment of postmenopausal osteoporosis when alternative treatments are not suitable. Fracture reduction efficacy has not been demonstrated (1.3).</IndicationAndUsage>
    <Description>Calcitonin is a polypeptide hormone secreted by the parafollicular cells of the thyroid gland in mammals and by the ultimobranchial gland of birds and fish. Calcitonin-salmon injection, Synthetic is a synthetic polypeptide of 32 amino acids in the same linear sequence that is found in calcitonin of salmon origin. This is shown by the following graphic formula. It is provided in sterile solution for subcutaneous or intramuscular injection. Each milliliter contains: calcitonin-salmon 200 USP Units. Inactive Ingredients (per mL): acetic acid, USP, 2.25 mg; phenol, USP, 5.0 mg; sodium acetate trihydrate, USP, 2.0 mg; sodium chloride, USP, 7.5 mg; water for injection, USP. The activity of calcitonin salmon injection is stated in International Units based on bioassay in comparison with the International Reference Preparation of calcitonin-salmon for Bioassay, distributed by the National Institute for Biological Standards and Control, Holly Hill, London.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-802-32</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (69097-802-32)  / 1 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>69097-0802-32</NDC11Code>
    <ProductNDC>69097-802</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Testosterone Cypionate</ProprietaryName>
    <NonProprietaryName>Testosterone Cypionate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20190326</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091244</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>TESTOSTERONE CYPIONATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Testosterone Cypionate Injection, USP is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency or absence of endogenous testosterone. : 1 Primary hypogonadism (congenital or acquired): testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy., 2 Hypogonadotropic hypogonadism (congenital or acquired): gonadotropin or luteinizing hormone-releasing hormone (LHRH) deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation.</IndicationAndUsage>
    <Description>Testosterone Cypionate Injection, USP for intramuscular injection, contains Testosterone Cypionate, USP which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone Cypionate, USP is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for Testosterone Cypionate, USP is androst-4-en-3-one,17-(3-cyclopentyl-1- oxopropoxy)-, (17β)-. Its molecular formula is C27H40O3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in one strength, 200 mg/mL Testosterone Cypionate, USP. Each mL of the 200 mg/mL solution contains.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-909-50</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (69097-909-50)  *  2 mL in 1 VIAL, SINGLE-DOSE (69097-950-32)  *  2 mL in 1 SYRINGE (69097-960-31) </PackageDescription>
    <NDC11Code>69097-0909-50</NDC11Code>
    <ProductNDC>69097-909</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leuprolide Acetate Depot</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20220715</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA205054</ApplicationNumber>
    <LabelerName>CIPLA USA INC.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220715</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration (leuprolide acetate) is indicated for treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin-releasing hormone (GnRH). The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. Where: n=1 or 2. Leuprolide acetate has a molecular weight of 1209.41 as free base”. Leuprolide is freely soluble in water. LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration is available in a vial containing white to off white sterile lyophilized microspheres together with the corresponding sterile reconstitution diluent in a pre-filled syringe. When LEUPROLIDE ACETATE FOR DEPOT SUSPENSION and the diluent are mixed together they become a suspension intended as an intramuscular injection to be given ONCE EVERY 12 WEEKS as a single dose. Each vial of LEUPROLIDE ACETATE FOR DEPOT SUSPENSION 22.5 mg for 3-month administration delivers leuprolide acetate (22.5 mg), polylactic acid (188.4 mg), triethylcitrate (10.4 mg), polysorbate 80 (3.8 mg), mannitol (88.4 mg) and carmellose sodium (25 mg). The prefilled syringe containing the clear reconstitution diluent (2 mL) contains mannitol (16 mg), water for injections, and sodium hydroxide and hydrochloric acid to control pH. Leuprolide acetate for depot suspension is an extended release sterile, single dose injection in suspension form for intramuscular administration.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-043-01</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (85766-043-01)  *  1 mL in 1 VIAL, GLASS (69097-028-32)  *  1 mL in 1 SYRINGE, GLASS (69097-029-31) </PackageDescription>
    <NDC11Code>85766-0043-01</NDC11Code>
    <ProductNDC>85766-043</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glucagon</ProprietaryName>
    <NonProprietaryName>Glucagon</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20251008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218813</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glucagon for injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes. ( 1.1) , 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients. ( 1.2) .</IndicationAndUsage>
    <Description>Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. Glucagon is synthesized by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide that contains 29 amino acid residues and has a molecular weight of 3483 Daltons. The empirical formula is C 153H 225N 43O 49S. The primary sequence of glucagon is shown below. Crystalline glucagon is a white to off-white powder. It is relatively insoluble in water but is soluble at a pH of less than 3 or more than 9.5. Glucagon for injection, USP is a sterile lyophilized white to off white powder in a vial and a syringe of sterile diluent for intravenous, intramuscular, or subcutaneous use. The vial contains 1 mg of glucagon, 49 mg of lactose monohydrate. Hydrochloric acid may have been added during manufacture to adjust the pH of the glucagon to 2.5 to 3.0. One International Unit of glucagon is equivalent to 1 mg of glucagon. The 1-mL diluent syringe contains 12 mg of glycerin, 1 mg hydrochloric acid, and Water for Injection, at pH 1.8 to 2.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-218-02</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (69097-218-02) </PackageDescription>
    <NDC11Code>69097-0218-02</NDC11Code>
    <ProductNDC>69097-218</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prucalopride</ProprietaryName>
    <NonProprietaryName>Prucalopride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250625</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218795</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>PRUCALOPRIDE SUCCINATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250625</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prucalopride tablets are indicated for the treatment of chronic idiopathic constipation (CIC) in adults.</IndicationAndUsage>
    <Description>Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-amino-5-chloro-N-[1-(3-methoxypropyl)piperidin-4-yl]-2,3-dihydrobenzofuran-7-carboxamide succinate. The molecular formula is C18H26ClN3O3.C4H6O4 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to almost white powder. It is freely soluble in water, sparingly soluble in methanol and slightly soluble in N, N-Dimethyl acetamide. Each film-coated tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The coating for the 1 mg tablet contains hypromellose, lactose monohydrate, polyethylene glycol, titanium dioxide, and triacetin. Each film-coated tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The coating for the 2 mg tablet contains hypromellose, lactose monohydrate, polyethylene glycol, titanium dioxide, triacetin, red iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-219-02</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (69097-219-02) </PackageDescription>
    <NDC11Code>69097-0219-02</NDC11Code>
    <ProductNDC>69097-219</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prucalopride</ProprietaryName>
    <NonProprietaryName>Prucalopride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250625</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218795</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>PRUCALOPRIDE SUCCINATE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250625</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prucalopride tablets are indicated for the treatment of chronic idiopathic constipation (CIC) in adults.</IndicationAndUsage>
    <Description>Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-amino-5-chloro-N-[1-(3-methoxypropyl)piperidin-4-yl]-2,3-dihydrobenzofuran-7-carboxamide succinate. The molecular formula is C18H26ClN3O3.C4H6O4 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to almost white powder. It is freely soluble in water, sparingly soluble in methanol and slightly soluble in N, N-Dimethyl acetamide. Each film-coated tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The coating for the 1 mg tablet contains hypromellose, lactose monohydrate, polyethylene glycol, titanium dioxide, and triacetin. Each film-coated tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The coating for the 2 mg tablet contains hypromellose, lactose monohydrate, polyethylene glycol, titanium dioxide, triacetin, red iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-003-96</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (69097-003-96)  / .5 mL in 1 SYRINGE (69097-003-67) </PackageDescription>
    <NDC11Code>69097-0003-96</NDC11Code>
    <ProductNDC>69097-003</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phytonadione</ProprietaryName>
    <NonProprietaryName>Phytonadione</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214966</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>PHYTONADIONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phytonadione Injectable Emulsion is a vitamin K replacement indicated for the treatment of the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by vitamin K deficiency or interference with vitamin K activity. : 1 Anticoagulant-induced hypoprothrombinemia deficiency caused by coumarin or indanedione derivatives; (1.1), 2 Hypoprothrombinemia due to antibacterial therapy; (1.1), 3 Hypoprothrombinemia secondary to factors limiting absorption or synthesis of vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis; (1.1), 4 Other drug-induced hypoprothrombinemia where is it definitely shown that the result is due to interference with vitamin K metabolism, e.g., salicylates. (1.1).</IndicationAndUsage>
    <Description>Phytonadione is a vitamin K replacement, which is a clear, yellow to amber, viscous, odorless or nearly odorless liquid. It is insoluble in water, soluble in chloroform and slightly soluble in ethanol. It has a molecular weight of 450.70. Phytonadione is 2-methyl-3-phytyl-1, 4-naphthoquinone. Its empirical formula is C31H46O2 and its molecular structure is. Phytonadione Injectable Emulsion, USP injection is a yellow, sterile, aqueous colloidal solution of vitamin K1, with a pH of 3.5 to 7.0, available for injection by the intravenous, intramuscular, and subcutaneous routes. Phytonadione Injectable Emulsion, USP is available in 1 mg (1 mg/0.5 mL) single-dose pre-filled syringe. Each 0.5 mL of Phytonadione Injectable Emulsion, USP contains the following inactive ingredients: 0.125 mg L-cysteine hydrochloride monohydrate, 10 mg polysorbate 80, 10.4 mg propylene glycol, 0.17 mg sodium acetate anhydrous, and 0.00002 mL glacial acetic acid. Additional glacial acetic acid or sodium acetate anhydrous may have been added to adjust pH to meet USP limits of 3.5 to 7.0. The air above the liquid in the individual containers has been displaced by flushing with nitrogen during the filling operation.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-004-67</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (69097-004-67)  / 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>69097-0004-67</NDC11Code>
    <ProductNDC>69097-004</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrocortisone Sodium Succinate</ProprietaryName>
    <NonProprietaryName>Hydrocortisone Sodium Succinate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20240925</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214050</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>HYDROCORTISONE SODIUM SUCCINATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240925</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of hydrocortisone sodium succinate for injection is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, select cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome, or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>Hydrocortisone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid that contains hydrocortisone sodium succinate, USP as the active ingredient. Hydrocortisone sodium succinate for injection, USP is available in below mentioned package for intravenous or intramuscular administration. 100 mg Plain—Vials containing hydrocortisone sodium succinate, USP equivalent to 100 mg hydrocortisone, 0.8 mg monobasic sodium phosphate anhydrous, 8.73 mg dibasic sodium phosphate dried. Hydrocortisone sodium succinate for injection, USP 100 mg plain does not contain diluent (see DOSAGE AND ADMINISTRATION, Preparation of Solutions). When necessary, the pH was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8. The chemical name for hydrocortisone sodium succinate is pregn-4-ene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-, monosodium salt, (11β)- and its molecular weight is 484.52. The structural formula is represented below. Hydrocortisone sodium succinate is a white or nearly white, odorless, hygroscopic amorphous solid. It is very soluble in water and in alcohol, very slightly soluble in acetone, and insoluble in chloroform.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-007-22</NDCCode>
    <PackageDescription>10 BAG in 1 CARTON (69097-007-22)  / 200 mL in 1 BAG (69097-007-45) </PackageDescription>
    <NDC11Code>69097-0007-22</NDC11Code>
    <ProductNDC>69097-007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241002</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215592</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241002</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nicardipine hydrochloride in 0.9% sodium chloride injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.</IndicationAndUsage>
    <Description>Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure:. Nicardipine hydrochloride is a pale greenish yellow powder that has a melting point range of 167-171°C. It is soluble in methanol and acetic acid, sparingly soluble in ethanol, slightly soluble in water. It has a molecular weight of 515.99. Nicardipine hydrochloride in 0.9% sodium chloride injection is available as a single-use, ready-to-use, iso-osmotic, clear, colorless to yellow solution for intravenous administration in a 200 mL single dose container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride USP in 9 mg sodium chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3.5 to 4.7.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-008-22</NDCCode>
    <PackageDescription>10 BAG in 1 CARTON (69097-008-22)  / 200 mL in 1 BAG (69097-008-45) </PackageDescription>
    <NDC11Code>69097-0008-22</NDC11Code>
    <ProductNDC>69097-008</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241002</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215592</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NICARDIPINE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241002</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nicardipine hydrochloride in 0.9% sodium chloride injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible.</IndicationAndUsage>
    <Description>Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2, 6-dimethyl-4- (m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure:. Nicardipine hydrochloride is a pale greenish yellow powder that has a melting point range of 167-171°C. It is soluble in methanol and acetic acid, sparingly soluble in ethanol, slightly soluble in water. It has a molecular weight of 515.99. Nicardipine hydrochloride in 0.9% sodium chloride injection is available as a single-use, ready-to-use, iso-osmotic, clear, colorless to yellow solution for intravenous administration in a 200 mL single dose container. Each mL contains 0.1 mg or 0.2 mg nicardipine hydrochloride USP in 9 mg sodium chloride, USP. Hydrochloric acid (q.s.) may have been added to adjust pH to 3.5 to 4.7.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-021-60</NDCCode>
    <PackageDescription>1 INHALER in 1 CARTON (69097-021-60)  / 200 AEROSOL, METERED in 1 INHALER</PackageDescription>
    <NDC11Code>69097-0021-60</NDC11Code>
    <ProductNDC>69097-021</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>AEROSOL, METERED</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20260422</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219409</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260422</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>The active component of albuterol sulfate inhalation aerosol is albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta2-adrenergic bronchodilator. Albuterol sulfate has the chemical name α1-[(tert-butylamino)methyl]-4-hydroxy-m-xylene-α, α′-diol sulfate (2:1)(salt) and the following chemical structure. Albuterol sulfate is a white crystalline powder with a molecular weight of 576.7, and the empirical formula is (C13H21NO3)2H2SO4. It is freely soluble in water and very slightly soluble in ethanol. The World Health Organization recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation aerosol is a white plastic inhaler with a blue cap fitted with a counter containing a pressurized metered-dose aerosol canister. Each canister contains a microcrystalline suspension of albuterol sulfate in propellant HFA-134a (1,1,1,2-tetrafluoroethane). It contains no other excipients. After priming, each actuation of the inhaler delivers 120 mcg of albuterol sulfate, USP in 75 mg of suspension from the valve and 108 mcg of albuterol sulfate, USP from the mouthpiece (equivalent to 90 mcg of albuterol base from the mouthpiece). Prime albuterol sulfate inhalation aerosol before using for the first time, when the inhaler has not been used for more than 2 weeks, or when the inhaler has been dropped. To prime albuterol sulfate inhalation aerosol, release 4 sprays into the air away from the face, shaking well before each spray. Avoid spraying in eyes.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-030-08</NDCCode>
    <PackageDescription>120 CAPSULE in 1 BOTTLE, PLASTIC (69097-030-08) </PackageDescription>
    <NDC11Code>69097-0030-08</NDC11Code>
    <ProductNDC>69097-030</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <EndMarketingDate>20270430</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270430</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-030-63</NDCCode>
    <PackageDescription>7 BLISTER PACK in 1 CARTON (69097-030-63)  / 4 CAPSULE in 1 BLISTER PACK (69097-030-16) </PackageDescription>
    <NDC11Code>69097-0030-63</NDC11Code>
    <ProductNDC>69097-030</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <EndMarketingDate>20270430</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270430</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-031-56</NDCCode>
    <PackageDescription>4 BLISTER PACK in 1 CARTON (69097-031-56)  / 28 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>69097-0031-56</NDC11Code>
    <ProductNDC>69097-031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-031-73</NDCCode>
    <PackageDescription>2 BLISTER PACK in 1 CARTON (69097-031-73)  / 28 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>69097-0031-73</NDC11Code>
    <ProductNDC>69097-031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-031-74</NDCCode>
    <PackageDescription>4 CARTON in 1 CARTON (69097-031-74)  / 4 BLISTER PACK in 1 CARTON (69097-031-56)  / 7 CAPSULE in 1 BLISTER PACK (69097-031-17) </PackageDescription>
    <NDC11Code>69097-0031-74</NDC11Code>
    <ProductNDC>69097-031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <EndMarketingDate>20270430</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270430</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-031-91</NDCCode>
    <PackageDescription>4 CARTON in 1 CARTON (69097-031-91)  / 2 BLISTER PACK in 1 CARTON (69097-031-73)  / 14 CAPSULE in 1 BLISTER PACK (69097-031-76) </PackageDescription>
    <NDC11Code>69097-0031-91</NDC11Code>
    <ProductNDC>69097-031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <EndMarketingDate>20270430</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270430</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-032-56</NDCCode>
    <PackageDescription>4 BLISTER PACK in 1 CARTON (69097-032-56)  / 28 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>69097-0032-56</NDC11Code>
    <ProductNDC>69097-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-032-73</NDCCode>
    <PackageDescription>2 BLISTER PACK in 1 CARTON (69097-032-73)  / 28 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>69097-0032-73</NDC11Code>
    <ProductNDC>69097-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69097-032-74</NDCCode>
    <PackageDescription>4 CARTON in 1 CARTON (69097-032-74)  / 4 BLISTER PACK in 1 CARTON (69097-032-56)  / 7 CAPSULE in 1 BLISTER PACK (69097-032-17) </PackageDescription>
    <NDC11Code>69097-0032-74</NDC11Code>
    <ProductNDC>69097-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nilotinib</ProprietaryName>
    <NonProprietaryName>Nilotinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250618</StartMarketingDate>
    <EndMarketingDate>20270430</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218922</ApplicationNumber>
    <LabelerName>Cipla USA Inc.</LabelerName>
    <SubstanceName>NILOTINIB</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Kinase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250618</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270430</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nilotinib Capsules is a kinase inhibitor indicated for the treatment of: : 1 Adult patients with newly diagnosed Philadelphia chromosome positive chronic myeloid leukemia (Ph+ CML) in chronic phase. (1.1) , 2 Adult patients with chronic phase (CP) and accelerated phase (AP) Ph+ CML resistant to or intolerant to prior therapy that included imatinib. (1.2).</IndicationAndUsage>
    <Description>Nilotinib Capsules contains nilotinib d-tartrate, which belongs to a pharmacologic class of drugs known as kinase inhibitors. Nilotinib d-tartrate is a white to yellow powder with the molecular formula and weight, respectively, of C32H28F3N7O7 and 679.61 g/mol (corresponding molecular formula and weight of nilotinib base, anhydrous are C28H22F3N7O and 529 g/mol, respectively). The solubility of nilotinib d-tartrate in aqueous solutions decreases with increasing pH. The pKa1 of nilotinib d-tartrate was determined to be 4.0. The chemical name of nilotinib d-tartrate is 4-methyl-N-[3-(4-methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)phenyl]-3-((4-(pyridin-3-yl)pyrimidin-2-yl)amino)benzamide D-Tartrate. Its structure is shown below:. Nilotinib Capsules, for oral use, contain 50 mg, 150 mg, or 200 mg nilotinib, anhydrous (equivalent to 64.172 mg, 192.517 mg, and 256.689 mg nilotinib d-tartrate, respectively). The inactive ingredients of Nilotinib Capsules are colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium aluminometasilicate, magnesium stearate, and polysorbate 80. The inactive ingredients in the empty capsules contain gelatin, iron oxide (black), iron oxide (red), iron oxide (yellow), and titanium dioxide. The black ink contains iron oxide (black), potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
  </NDC>
</NDCList>