{
"NDC": [
{
"NDCCode": "69238-1204-2",
"PackageDescription": "4 POUCH in 1 CARTON (69238-1204-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "69238-1204-02",
"ProductNDC": "69238-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211586",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "15",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200420",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone."
},
{
"NDCCode": "10191-1204-2",
"PackageDescription": "151 PELLET in 1 VIAL, GLASS (10191-1204-2)",
"NDC11Code": "10191-1204-02",
"ProductNDC": "10191-1204",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allium Cepa",
"NonProprietaryName": "Onion",
"DosageFormName": "PELLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20040929",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Remedy Makers",
"SubstanceName": "ONION",
"StrengthNumber": "15",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Free from yeast, wheat, corn, and soy.DIRECTIONS: Dissolve 3 or 4 pelletsin mouth or under tongue 3 times a day or as directed by a physician.Children 2 years and older take 1/2adult dose.INDICATIONS: To be used accordingto standard homeopathic indicationsfor self limiting conditions such asthose indicated on the front panel or as directed by a physician.Warnings: *Use only if cap andseal are unbroken. * Keep this and all medications out of reach of children.* If symptoms persist for more then 3days, consult your physician. *As with any drug, if your are pregnant or nursing a baby, seek the advice of ahealth professional before using this product.*Store tightly closed in a cool, dark place.Made according to The Homeopathic Pharmacopoeia of the United States by: Remedy Makers, Pomona, CA 91768."
},
{
"NDCCode": "10742-1204-2",
"PackageDescription": "55 SWAB in 1 JAR (10742-1204-2)",
"NDC11Code": "10742-1204-02",
"ProductNDC": "10742-1204",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Oxy Daily Defense Cleansing Pads",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130115",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333D",
"LabelerName": "The Mentholatum Company",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "36987-1204-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1204-2)",
"NDC11Code": "36987-1204-02",
"ProductNDC": "36987-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Codfish",
"NonProprietaryName": "Codfish",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "CODFISH",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fish Proteins, Dietary [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1204-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-1204-2) ",
"NDC11Code": "37662-1204-02",
"ProductNDC": "37662-1204",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sabal Serrulata",
"NonProprietaryName": "Sabal Serrulata",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220804",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "SAW PALMETTO",
"StrengthNumber": "200",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-08-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220804",
"SamplePackage": "N"
},
{
"NDCCode": "48951-1204-2",
"PackageDescription": "1350 PELLET in 1 BOTTLE, GLASS (48951-1204-2) ",
"NDC11Code": "48951-1204-02",
"ProductNDC": "48951-1204",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aurum Prunus",
"NonProprietaryName": "Aurum Prunus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Uriel Pharmacy Inc.",
"SubstanceName": "GOLD; SLOE",
"StrengthNumber": "10; 6",
"StrengthUnit": "[hp_X]/1; [hp_X]/1",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20090901",
"SamplePackage": "N",
"IndicationAndUsage": "Directions: FOR ORAL USE ONLY."
},
{
"NDCCode": "51662-1204-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1204-3) / 1 mL in 1 POUCH (51662-1204-2) ",
"NDC11Code": "51662-1204-03",
"ProductNDC": "51662-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminophylline",
"NonProprietaryName": "Aminophylline",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087242",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "AMINOPHYLLINE DIHYDRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Methylxanthine [EPC], Xanthines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous theophylline is indicated as an adjunct to inhaled beta-2 selective agonists and systemically administered corticosteroids for the treatment of acute exacerbations of the symptoms and reversible airflow obstruction associated with asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.",
"Description": "Aminophylline Injection, USP is a sterile, nonpyrogenic solution of aminophylline in water for injection. Aminophylline (dihydrate) is approximately 79% of anhydrous theophylline by weight. Aminophylline Injection is administered by slow intravenous injection or diluted and administered by intravenous infusion. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Aminophylline is a 2:1 complex of theophylline and ethylenediamine. Theophylline is structurally classified as a methylxanthine. Aminophylline occurs as a white or slightly yellowish granule or powder, with a slight ammoniacal odor. Aminophylline has the chemical name 1H-Purine-2, 6-dione, 3,7-dihydro-1,3-dimethyl-, compound with 1,2-ethanediamine (2:1). The structural formula of aminophylline (dihydrate) is as follows. The molecular formula of aminophylline dihydrate is C16H24N10O4 2(H2O) with a molecular weight of 456.46. Aminophylline Injection, USP contains aminophylline (calculated as the dihydrate) 25 mg/mL (equivalent to 19.7 mg/mL anhydrous theophylline) prepared with the aid of ethylenediamine. The solution may contain an excess of ethylenediamine for pH adjustment. pH is 8.8 (8.6 to 9.0). The osmolar concentration is 0.17 mOsmol/mL (calc.)."
},
{
"NDCCode": "64942-1204-2",
"PackageDescription": "1 CONTAINER in 1 CARTON (64942-1204-2) > 48 g in 1 CONTAINER (64942-1204-1)",
"NDC11Code": "64942-1204-02",
"ProductNDC": "64942-1204",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dove",
"ProprietaryNameSuffix": "Clinical Protection Cleartone Antiperspirant And Deodorant",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110826",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Conopco Inc. d/b/a Unilever",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "20",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Uses· reduces underarm wetness· 24 hour protection· extra effective."
},
{
"NDCCode": "65372-1204-2",
"PackageDescription": "20 kg in 1 DRUM (65372-1204-2) ",
"NDC11Code": "65372-1204-02",
"ProductNDC": "65372-1204",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Apremilast",
"DosageFormName": "POWDER",
"StartMarketingDate": "20200117",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Jubilant Biosys limited",
"SubstanceName": "APREMILAST",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-31",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "17-JAN-20"
},
{
"NDCCode": "70518-1204-2",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (70518-1204-2) ",
"NDC11Code": "70518-1204-02",
"ProductNDC": "70518-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trazodone Hydrochloride",
"NonProprietaryName": "Trazodone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205253",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "TRAZODONE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220331",
"SamplePackage": "N",
"IndicationAndUsage": "Trazodone is a selective serotonin reuptake inhibitor indicated for the treatment of major depressive disorder (MDD) ( 1).",
"Description": "Trazodone hydrochloride is a selective serotonin reuptake inhibitor and 5HT2 receptor antagonist. Trazodone hydrochloride, USP is a triazolopyridine derivative designated as 2-[3-[4-(3-chlorophenyl)-1-piperazinyl]propyl]- 1,2,4-triazolo[4, 3-a]pyridin-3(2H)-one hydrochloride. It is a white to off-white, crystalline powder which is sparingly soluble in chloroform and in water. The structural formula is represented as follows. Molecular Formula: C 19H 22C lN 5OHCl. Molecular Weight: 408.33. Each trazodone hydrochloride tablet, USP for oral administration contains 50 mg, 100 mg, 150 mg or 300 mg of trazodone hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate, and sodium starch glycolate. The USP Dissolution Test is pending."
},
{
"NDCCode": "72934-1204-2",
"PackageDescription": "30 g in 1 BOTTLE, PUMP (72934-1204-2) ",
"NDC11Code": "72934-1204-02",
"ProductNDC": "72934-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "011020 Niacinamide 4% / Tretinoin 0.05%",
"NonProprietaryName": "011020 Niacinamide 4% / Tretinoin 0.05%",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200702",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Sincerus Florida, LLC",
"SubstanceName": "NIACINAMIDE; TRETINOIN",
"StrengthNumber": "4; .05",
"StrengthUnit": "g/100g; g/100g",
"Pharm_Classes": "Retinoid [EPC],Retinoids [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200702",
"SamplePackage": "N"
},
{
"NDCCode": "79481-1204-2",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (79481-1204-2) / 14 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "79481-1204-02",
"ProductNDC": "79481-1204",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucus Relief",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213420",
"LabelerName": "Meijer",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": "1200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]",
"Status": "Active",
"LastUpdate": "2025-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250314",
"SamplePackage": "N",
"IndicationAndUsage": "■ helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive."
},
{
"NDCCode": "82969-1204-2",
"PackageDescription": "8 g in 1 BOTTLE, GLASS (82969-1204-2) ",
"NDC11Code": "82969-1204-02",
"ProductNDC": "82969-1204",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bmnp Ferr Phos",
"NonProprietaryName": "Ferrum Phosphoricum",
"DosageFormName": "GLOBULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260601",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Total Operations Management LLC DBA:Bestmade Natural Products Micro",
"SubstanceName": "FERROSOFERRIC PHOSPHATE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/g",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Helps temporarily relieve: occasional poor appetite; feelings of tiredness or weakness; congestion; aches; elevated body temperature; and headaches."
},
{
"NDCCode": "69238-1013-2",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (69238-1013-2) / 88 g in 1 BOTTLE, PUMP",
"NDC11Code": "69238-1013-02",
"ProductNDC": "69238-1013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Testosterone",
"NonProprietaryName": "Testosterone",
"DosageFormName": "GEL, METERED",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207373",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "TESTOSTERONE",
"StrengthNumber": "20.25",
"StrengthUnit": "mg/1.25g",
"Pharm_Classes": "Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2025-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190410",
"SamplePackage": "N",
"IndicationAndUsage": "Testosterone gel 1.62% is indicated for replacement therapy in adult males for conditions associated with a deficiency or absence of endogenous testosterone: : 1 Primary hypogonadism (congenital or acquired): testicular failure due to conditions such as cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome, orchiectomy, Klinefelter's syndrome, chemotherapy, or toxic damage from alcohol or heavy metals. These men usually have low serum testosterone concentrations and gonadotropins (follicle-stimulating hormone [FSH], luteinizing hormone [LH]) above the normal range. .",
"Description": "Testosterone gel 1.62% for topical use is a clear, colorless gel, free from lumps and foreign matter with homogeneous consistency and no phase separation containing testosterone, USP. Testosterone, USP is an androgen. Testosterone gel 1.62% is available in a metered-dose pump. The active pharmacologic ingredient in testosterone gel 1.62% is testosterone, USP. Testosterone, USP is a white to almost white powder chemically described as 17-beta hydroxyandrost-4-en-3-one. The structural formula is. The inactive ingredients in testosterone gel 1.62% are: carbopol 980, ethyl alcohol (alcohol 72.22% v/v), isopropyl myristate, purified water and sodium hydroxide."
},
{
"NDCCode": "69238-1050-2",
"PackageDescription": "2 BOTTLE in 1 CARTON (69238-1050-2) / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (69238-1050-4) ",
"NDC11Code": "69238-1050-02",
"ProductNDC": "69238-1050",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190605",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209716",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190605",
"SamplePackage": "N",
"IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
},
{
"NDCCode": "69238-1050-9",
"PackageDescription": "2 BOTTLE in 1 BLISTER PACK (69238-1050-9) / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (69238-1050-4) ",
"NDC11Code": "69238-1050-09",
"ProductNDC": "69238-1050",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190605",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209716",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190605",
"SamplePackage": "N",
"IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
},
{
"NDCCode": "69238-1063-2",
"PackageDescription": "50 TABLET, FILM COATED in 1 BOTTLE (69238-1063-2) ",
"NDC11Code": "69238-1063-02",
"ProductNDC": "69238-1063",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desipramine Hydrochloride",
"NonProprietaryName": "Desipramine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160321",
"EndMarketingDate": "20271130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208105",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "DESIPRAMINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160321",
"EndMarketingDatePackage": "20271130",
"SamplePackage": "N",
"IndicationAndUsage": "Desipramine hydrochloride tablets are indicated for the treatment of depression.",
"Description": "Desipramine hydrochloride tablets, USP are an antidepressant drug of the tricyclic type, and is chemically: 5H-Dibenz[bƒ]azepine-5-propanamine,10,11-dihydro-N-methyl-, monohydrochloride. Each desipramine hydrochloride tablet, USP contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg of desipramine hydrochloride, USP for oral administration. Inactive IngredientsDesipramine hydrochloride tablets, USP contain the following inactive ingredients: corn starch, D&C Red #27 aluminum lake (in 75 mg), FD&C Blue #1 aluminum lake (in 10 mg and 50 mg), FD&C Blue #2 aluminum lake (in 10 mg), FD&C Red #40 aluminum lake (in 75 mg), FD&C Yellow #6 aluminum lake (in 50 mg, 75 mg and 100 mg), hydroxypropyl cellulose, hypromellose, iron oxide red (in 100 mg), iron oxide yellow (in 25 mg and 50 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "69238-1100-2",
"PackageDescription": "50 CAPSULE in 1 BOTTLE (69238-1100-2) ",
"NDC11Code": "69238-1100-02",
"ProductNDC": "69238-1100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160628",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207289",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160628",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Treatment: Doxycycline is indicated for the treatment of the following infections: : 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. , 2 Respiratory tract infections caused by Mycoplasma pneumoniae. , 3 Lymphogranuloma venereum caused by Chlamydia trachomatis. , 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci. , 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence. , 6 Inclusion conjunctivitis caused by Chlamydia trachomatis. , 7 Uncomplicated urethral, endocervical, or rectal infections in adults caused by Chlamydia trachomatis. , 8 Nongonococcal urethritis caused by Ureaplasma urealyticum. , 9 Relapsing fever due to Borrelia recurrentis. .",
"Description": "Doxycycline hyclate, USP is an antibacterial drug synthetically derived from oxytetracycline for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46 g/mol. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8HCl)2C2H6OH2O and the molecular weight is 1025.89 g/mol. Doxycycline, USP is a light-yellow crystalline powder. Doxycycline hyclate, USP is soluble in water. Doxycycline, USP has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline, USP will not degrade into an epianhydro form. Inert ingredients in the capsule formulations are: magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. The hard gelatin capsule shells contains: FD&C Blue 1, gelatin, sodium lauryl sulfate and titanium dioxide. The printing ink contains: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "69238-1118-2",
"PackageDescription": "180 TABLET in 1 BOTTLE (69238-1118-2) ",
"NDC11Code": "69238-1118-02",
"ProductNDC": "69238-1118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hcl",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208829",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-12-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170524",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling \"on edge,\" irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet, for oral administration, contains 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "69238-1202-2",
"PackageDescription": "4 POUCH in 1 CARTON (69238-1202-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "69238-1202-02",
"ProductNDC": "69238-1202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211586",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "5",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200420",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone."
},
{
"NDCCode": "69238-1203-2",
"PackageDescription": "4 POUCH in 1 CARTON (69238-1203-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "69238-1203-02",
"ProductNDC": "69238-1203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211586",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "10",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200420",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone."
},
{
"NDCCode": "69238-1205-2",
"PackageDescription": "4 POUCH in 1 CARTON (69238-1205-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "69238-1205-02",
"ProductNDC": "69238-1205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211586",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "20",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200420",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone."
},
{
"NDCCode": "69238-1271-2",
"PackageDescription": "1 TUBE in 1 CARTON (69238-1271-2) / 120 g in 1 TUBE",
"NDC11Code": "69238-1271-02",
"ProductNDC": "69238-1271",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211111",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180731",
"SamplePackage": "N",
"IndicationAndUsage": "Fluocinonide Cream, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses in patients 12 years of age or older. (1). Limitation of Use: : 1 Treatment beyond 2 consecutive weeks is not recommended and the total dosage should not exceed 60 g per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. (1), 2 Avoid use on the face, groin, or axillae. (1.2), 3 Avoid use in perioral dermatitis or rosacea. .",
"Description": "Fluocinonide Cream, USP, 0.1% contains fluocinonide, USP, a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Fluocinonide, USP has the chemical name 6α, 9-Difluoro-11ß, 16α, 17,21-tetrahydroxypregna-1, 4-diene-3,20-dione, cyclic 16,17-acetal with acetone, 21-acetate. Its chemical formula is C26H32F2O7 and it has a molecular weight of 494.52. It has the following chemical structure. Fluocinonide, USP is an almost odorless white to creamy white crystalline powder. It is practically insoluble in water and slightly soluble in ethanol. Each gram of Fluocinonide Cream, USP 0.1% contains 1 mg micronized fluocinonide, USP in a cream base of propylene glycol USP, diethylene glycol monoethyl ether NF, glyceryl stearate (and) PEG-100 stearate, glyceryl monostearate NF, purified water USP, carbomer homopolymer Type C NF (carbopol 980), diisopropanolamine, and anhydrous citric acid USP."
},
{
"NDCCode": "69238-1303-2",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (69238-1303-2) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "69238-1303-02",
"ProductNDC": "69238-1303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209613",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21 g/mol, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is sparingly soluble in acetone, slightly soluble in ethanol and practically insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of colloidal anhydrous silica, FD & C Blue # 2/indigo carmine aluminum lake, hypromellose, polyethylene glycol, titanium dioxide and in addition to these, the 7 mg tablet film coating includes iron oxide yellow."
},
{
"NDCCode": "69238-1304-2",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (69238-1304-2) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "69238-1304-02",
"ProductNDC": "69238-1304",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209613",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "14",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21 g/mol, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is sparingly soluble in acetone, slightly soluble in ethanol and practically insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of colloidal anhydrous silica, FD & C Blue # 2/indigo carmine aluminum lake, hypromellose, polyethylene glycol, titanium dioxide and in addition to these, the 7 mg tablet film coating includes iron oxide yellow."
},
{
"NDCCode": "69238-1373-2",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (69238-1373-2) / 2.5 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "69238-1373-02",
"ProductNDC": "69238-1373",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin And Dexamethasone",
"NonProprietaryName": "Tobramycin And Dexamethasone",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212991",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "DEXAMETHASONE; TOBRAMYCIN",
"StrengthNumber": "1; 3",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210717",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.",
"Description": "Tobramycin and dexamethasone ophthalmic suspension, USP is a sterile, multiple-dose antibiotic and steroid combination for topical ophthalmic use.The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin, USP. Tobramycin, USP is a white to off-white, hygroscopic powder. It is freely soluble in water, very slightly soluble in alcohol, practically insoluble in chloroform and in ether. Chemical Structure:. Molecular Formula: C18H37N5O9Molecular Weight: 467.51Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl (1→6)]-2-deoxy-L-streptamine. Dexamethasone, USP. Dexamethasone, USP (Micronised) is a white or practically white crystalline powder. Chemical Structure. Molecular Formula: C22H29FO5Molecular Weight: 392.46Chemical Name: 9-Fluoro-11ß,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. Each mL of tobramycin and dexamethasone ophthalmic suspension, USP contains. Active: tobramycin, USP 0.3% (3 mg) and dexamethasone, USP 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: tyloxapol, edetate disodium, sodium chloride, hydroxyethyl cellulose, sodium sulfate, sulfuric acid and/or sodium hydroxide (to adjust pH) and water for injection, USP."
},
{
"NDCCode": "69238-1422-2",
"PackageDescription": "1 BOTTLE in 1 CARTON (69238-1422-2) / 20 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "69238-1422-02",
"ProductNDC": "69238-1422",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naproxen Sodium And Diphenhydramine Hcl",
"NonProprietaryName": "Naproxen Sodium And Diphenhydramine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209726",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "NAPROXEN SODIUM; DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "220; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181023",
"SamplePackage": "N",
"IndicationAndUsage": "for relief of occasional sleeplessness when associated with minor aches and pains. helps you fall asleep and stay asleep."
},
{
"NDCCode": "69238-1458-2",
"PackageDescription": "473 mL in 1 BOTTLE (69238-1458-2) ",
"NDC11Code": "69238-1458-02",
"ProductNDC": "69238-1458",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20180724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210041",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180724",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride oral solution is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.",
"Description": "Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose."
},
{
"NDCCode": "69238-1459-2",
"PackageDescription": "473 mL in 1 BOTTLE (69238-1459-2) ",
"NDC11Code": "69238-1459-02",
"ProductNDC": "69238-1459",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20180724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210041",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/15mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180724",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride oral solution is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.",
"Description": "Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose."
},
{
"NDCCode": "69238-1504-2",
"PackageDescription": "100 mL in 1 BOTTLE (69238-1504-2) ",
"NDC11Code": "69238-1504-02",
"ProductNDC": "69238-1504",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin Ethylsuccinate",
"NonProprietaryName": "Erythromycin",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20191104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211204",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ERYTHROMYCIN ETHYLSUCCINATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191104",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin ethylsuccinate for oral suspension and other antibacterial drugs, erythromycin ethylsuccinate for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin ethylsuccinate for oral suspension is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below:. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute Pelvic Inflammatory Disease Caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis Caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in penicillin-allergic patients. In primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: Conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease. Prophylaxis. Prevention of Initial Attacks of Rheumatic Fever. Penicillin is considered by the American Heart Association to be the drug of choice in the prevention of initial attacks of rheumatic fever (treatment of Streptococcus pyogenes infections of the upper respiratory tract, e.g., tonsillitis or pharyngitis). Erythromycin is indicated for the treatment of penicillin-allergic patients.4 The therapeutic dose should be administered for 10 days. Prevention of Recurrent Attacks of Rheumatic Fever. Penicillin or sulfonamides are considered by the American Heart Association to be the drugs of choice in the prevention of recurrent attacks of rheumatic fever. In patients who are allergic to penicillin and sulfonamides, oral erythromycin is recommended by the American Heart Association in the long-term prophylaxis of Streptococcal pharyngitis (for the prevention of recurrent attacks of rheumatic fever).4.",
"Description": "Erythromycin, USP is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate, USP is an ester of erythromycin, USP suitable for oral administration. Erythromycin ethylsuccinate, USP is known chemically as erythromycin 2′-(ethyl succinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. Erythromycin ethylsuccinate for oral suspension, USP, 200 mg/5 mL when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate, USP equivalent to 200 mg erythromycin, USP per 5 mL (teaspoonful) or 100 mg per 2.5 mL (dropperful) with an appealing fruit flavor. Erythromycin ethylsuccinate for oral suspension, USP, 400 mg/5 mL when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate, USP equivalent to 400 mg of erythromycin, USP per 5 mL (teaspoonful) with an appealing banana flavor. These products are intended primarily for pediatric use but can also be used in adults. Inactive Ingredients. Erythromycin ethylsuccinate for oral suspension, USP, 200 mg/5 mL contains caramel flavor, mixed fruit flavor, polysorbate 80, sodium citrate dihydrate, sucrose, and xanthan gum. Erythromycin ethylsuccinate for oral suspension, USP 400 mg/5 mL contains banana flavor, caramel flavor, polysorbate 80, sodium citrate dihydrate, sucrose, and xanthan gum."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69238-1204-2</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (69238-1204-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>69238-1204-02</NDC11Code>
<ProductNDC>69238-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211586</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>10191-1204-2</NDCCode>
<PackageDescription>151 PELLET in 1 VIAL, GLASS (10191-1204-2)</PackageDescription>
<NDC11Code>10191-1204-02</NDC11Code>
<ProductNDC>10191-1204</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allium Cepa</ProprietaryName>
<NonProprietaryName>Onion</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20040929</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Remedy Makers</LabelerName>
<SubstanceName>ONION</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Free from yeast, wheat, corn, and soy.DIRECTIONS: Dissolve 3 or 4 pelletsin mouth or under tongue 3 times a day or as directed by a physician.Children 2 years and older take 1/2adult dose.INDICATIONS: To be used accordingto standard homeopathic indicationsfor self limiting conditions such asthose indicated on the front panel or as directed by a physician.Warnings: *Use only if cap andseal are unbroken. * Keep this and all medications out of reach of children.* If symptoms persist for more then 3days, consult your physician. *As with any drug, if your are pregnant or nursing a baby, seek the advice of ahealth professional before using this product.*Store tightly closed in a cool, dark place.Made according to The Homeopathic Pharmacopoeia of the United States by: Remedy Makers, Pomona, CA 91768.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10742-1204-2</NDCCode>
<PackageDescription>55 SWAB in 1 JAR (10742-1204-2)</PackageDescription>
<NDC11Code>10742-1204-02</NDC11Code>
<ProductNDC>10742-1204</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Oxy Daily Defense Cleansing Pads</ProprietaryName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130115</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333D</ApplicationNumber>
<LabelerName>The Mentholatum Company</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>36987-1204-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1204-2)</PackageDescription>
<NDC11Code>36987-1204-02</NDC11Code>
<ProductNDC>36987-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Codfish</ProprietaryName>
<NonProprietaryName>Codfish</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>CODFISH</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fish Proteins, Dietary [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1204-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-1204-2) </PackageDescription>
<NDC11Code>37662-1204-02</NDC11Code>
<ProductNDC>37662-1204</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sabal Serrulata</ProprietaryName>
<NonProprietaryName>Sabal Serrulata</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220804</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>SAW PALMETTO</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-08-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>48951-1204-2</NDCCode>
<PackageDescription>1350 PELLET in 1 BOTTLE, GLASS (48951-1204-2) </PackageDescription>
<NDC11Code>48951-1204-02</NDC11Code>
<ProductNDC>48951-1204</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aurum Prunus</ProprietaryName>
<NonProprietaryName>Aurum Prunus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Uriel Pharmacy Inc.</LabelerName>
<SubstanceName>GOLD; SLOE</SubstanceName>
<StrengthNumber>10; 6</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions: FOR ORAL USE ONLY.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51662-1204-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1204-3) / 1 mL in 1 POUCH (51662-1204-2) </PackageDescription>
<NDC11Code>51662-1204-03</NDC11Code>
<ProductNDC>51662-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminophylline</ProprietaryName>
<NonProprietaryName>Aminophylline</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087242</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>AMINOPHYLLINE DIHYDRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous theophylline is indicated as an adjunct to inhaled beta-2 selective agonists and systemically administered corticosteroids for the treatment of acute exacerbations of the symptoms and reversible airflow obstruction associated with asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.</IndicationAndUsage>
<Description>Aminophylline Injection, USP is a sterile, nonpyrogenic solution of aminophylline in water for injection. Aminophylline (dihydrate) is approximately 79% of anhydrous theophylline by weight. Aminophylline Injection is administered by slow intravenous injection or diluted and administered by intravenous infusion. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Aminophylline is a 2:1 complex of theophylline and ethylenediamine. Theophylline is structurally classified as a methylxanthine. Aminophylline occurs as a white or slightly yellowish granule or powder, with a slight ammoniacal odor. Aminophylline has the chemical name 1H-Purine-2, 6-dione, 3,7-dihydro-1,3-dimethyl-, compound with 1,2-ethanediamine (2:1). The structural formula of aminophylline (dihydrate) is as follows. The molecular formula of aminophylline dihydrate is C16H24N10O4 2(H2O) with a molecular weight of 456.46. Aminophylline Injection, USP contains aminophylline (calculated as the dihydrate) 25 mg/mL (equivalent to 19.7 mg/mL anhydrous theophylline) prepared with the aid of ethylenediamine. The solution may contain an excess of ethylenediamine for pH adjustment. pH is 8.8 (8.6 to 9.0). The osmolar concentration is 0.17 mOsmol/mL (calc.).</Description>
</NDC>
<NDC>
<NDCCode>64942-1204-2</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (64942-1204-2) > 48 g in 1 CONTAINER (64942-1204-1)</PackageDescription>
<NDC11Code>64942-1204-02</NDC11Code>
<ProductNDC>64942-1204</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dove</ProprietaryName>
<ProprietaryNameSuffix>Clinical Protection Cleartone Antiperspirant And Deodorant</ProprietaryNameSuffix>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110826</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Conopco Inc. d/b/a Unilever</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses· reduces underarm wetness· 24 hour protection· extra effective.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65372-1204-2</NDCCode>
<PackageDescription>20 kg in 1 DRUM (65372-1204-2) </PackageDescription>
<NDC11Code>65372-1204-02</NDC11Code>
<ProductNDC>65372-1204</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Apremilast</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20200117</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Jubilant Biosys limited</LabelerName>
<SubstanceName>APREMILAST</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-31</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>17-JAN-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70518-1204-2</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (70518-1204-2) </PackageDescription>
<NDC11Code>70518-1204-02</NDC11Code>
<ProductNDC>70518-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trazodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Trazodone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205253</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>TRAZODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Trazodone is a selective serotonin reuptake inhibitor indicated for the treatment of major depressive disorder (MDD) ( 1).</IndicationAndUsage>
<Description>Trazodone hydrochloride is a selective serotonin reuptake inhibitor and 5HT2 receptor antagonist. Trazodone hydrochloride, USP is a triazolopyridine derivative designated as 2-[3-[4-(3-chlorophenyl)-1-piperazinyl]propyl]- 1,2,4-triazolo[4, 3-a]pyridin-3(2H)-one hydrochloride. It is a white to off-white, crystalline powder which is sparingly soluble in chloroform and in water. The structural formula is represented as follows. Molecular Formula: C 19H 22C lN 5OHCl. Molecular Weight: 408.33. Each trazodone hydrochloride tablet, USP for oral administration contains 50 mg, 100 mg, 150 mg or 300 mg of trazodone hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate, and sodium starch glycolate. The USP Dissolution Test is pending.</Description>
</NDC>
<NDC>
<NDCCode>72934-1204-2</NDCCode>
<PackageDescription>30 g in 1 BOTTLE, PUMP (72934-1204-2) </PackageDescription>
<NDC11Code>72934-1204-02</NDC11Code>
<ProductNDC>72934-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>011020 Niacinamide 4% / Tretinoin 0.05%</ProprietaryName>
<NonProprietaryName>011020 Niacinamide 4% / Tretinoin 0.05%</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200702</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Sincerus Florida, LLC</LabelerName>
<SubstanceName>NIACINAMIDE; TRETINOIN</SubstanceName>
<StrengthNumber>4; .05</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC],Retinoids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>79481-1204-2</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (79481-1204-2) / 14 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>79481-1204-02</NDC11Code>
<ProductNDC>79481-1204</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucus Relief</ProprietaryName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213420</ApplicationNumber>
<LabelerName>Meijer</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>1200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250314</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>■ helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>82969-1204-2</NDCCode>
<PackageDescription>8 g in 1 BOTTLE, GLASS (82969-1204-2) </PackageDescription>
<NDC11Code>82969-1204-02</NDC11Code>
<ProductNDC>82969-1204</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bmnp Ferr Phos</ProprietaryName>
<NonProprietaryName>Ferrum Phosphoricum</NonProprietaryName>
<DosageFormName>GLOBULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260601</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Total Operations Management LLC DBA:Bestmade Natural Products Micro</LabelerName>
<SubstanceName>FERROSOFERRIC PHOSPHATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps temporarily relieve: occasional poor appetite; feelings of tiredness or weakness; congestion; aches; elevated body temperature; and headaches.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69238-1013-2</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (69238-1013-2) / 88 g in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>69238-1013-02</NDC11Code>
<ProductNDC>69238-1013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Testosterone</ProprietaryName>
<NonProprietaryName>Testosterone</NonProprietaryName>
<DosageFormName>GEL, METERED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207373</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>TESTOSTERONE</SubstanceName>
<StrengthNumber>20.25</StrengthNumber>
<StrengthUnit>mg/1.25g</StrengthUnit>
<Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Testosterone gel 1.62% is indicated for replacement therapy in adult males for conditions associated with a deficiency or absence of endogenous testosterone: : 1 Primary hypogonadism (congenital or acquired): testicular failure due to conditions such as cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome, orchiectomy, Klinefelter's syndrome, chemotherapy, or toxic damage from alcohol or heavy metals. These men usually have low serum testosterone concentrations and gonadotropins (follicle-stimulating hormone [FSH], luteinizing hormone [LH]) above the normal range. .</IndicationAndUsage>
<Description>Testosterone gel 1.62% for topical use is a clear, colorless gel, free from lumps and foreign matter with homogeneous consistency and no phase separation containing testosterone, USP. Testosterone, USP is an androgen. Testosterone gel 1.62% is available in a metered-dose pump. The active pharmacologic ingredient in testosterone gel 1.62% is testosterone, USP. Testosterone, USP is a white to almost white powder chemically described as 17-beta hydroxyandrost-4-en-3-one. The structural formula is. The inactive ingredients in testosterone gel 1.62% are: carbopol 980, ethyl alcohol (alcohol 72.22% v/v), isopropyl myristate, purified water and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>69238-1050-2</NDCCode>
<PackageDescription>2 BOTTLE in 1 CARTON (69238-1050-2) / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (69238-1050-4) </PackageDescription>
<NDC11Code>69238-1050-02</NDC11Code>
<ProductNDC>69238-1050</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190605</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209716</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69238-1050-9</NDCCode>
<PackageDescription>2 BOTTLE in 1 BLISTER PACK (69238-1050-9) / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (69238-1050-4) </PackageDescription>
<NDC11Code>69238-1050-09</NDC11Code>
<ProductNDC>69238-1050</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190605</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209716</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69238-1063-2</NDCCode>
<PackageDescription>50 TABLET, FILM COATED in 1 BOTTLE (69238-1063-2) </PackageDescription>
<NDC11Code>69238-1063-02</NDC11Code>
<ProductNDC>69238-1063</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desipramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Desipramine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160321</StartMarketingDate>
<EndMarketingDate>20271130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208105</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DESIPRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160321</StartMarketingDatePackage>
<EndMarketingDatePackage>20271130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desipramine hydrochloride tablets are indicated for the treatment of depression.</IndicationAndUsage>
<Description>Desipramine hydrochloride tablets, USP are an antidepressant drug of the tricyclic type, and is chemically: 5H-Dibenz[bƒ]azepine-5-propanamine,10,11-dihydro-N-methyl-, monohydrochloride. Each desipramine hydrochloride tablet, USP contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg of desipramine hydrochloride, USP for oral administration. Inactive IngredientsDesipramine hydrochloride tablets, USP contain the following inactive ingredients: corn starch, D&C Red #27 aluminum lake (in 75 mg), FD&C Blue #1 aluminum lake (in 10 mg and 50 mg), FD&C Blue #2 aluminum lake (in 10 mg), FD&C Red #40 aluminum lake (in 75 mg), FD&C Yellow #6 aluminum lake (in 50 mg, 75 mg and 100 mg), hydroxypropyl cellulose, hypromellose, iron oxide red (in 100 mg), iron oxide yellow (in 25 mg and 50 mg), lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>69238-1100-2</NDCCode>
<PackageDescription>50 CAPSULE in 1 BOTTLE (69238-1100-2) </PackageDescription>
<NDC11Code>69238-1100-02</NDC11Code>
<ProductNDC>69238-1100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160628</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207289</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Treatment: Doxycycline is indicated for the treatment of the following infections: : 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. , 2 Respiratory tract infections caused by Mycoplasma pneumoniae. , 3 Lymphogranuloma venereum caused by Chlamydia trachomatis. , 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci. , 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence. , 6 Inclusion conjunctivitis caused by Chlamydia trachomatis. , 7 Uncomplicated urethral, endocervical, or rectal infections in adults caused by Chlamydia trachomatis. , 8 Nongonococcal urethritis caused by Ureaplasma urealyticum. , 9 Relapsing fever due to Borrelia recurrentis. .</IndicationAndUsage>
<Description>Doxycycline hyclate, USP is an antibacterial drug synthetically derived from oxytetracycline for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46 g/mol. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8HCl)2C2H6OH2O and the molecular weight is 1025.89 g/mol. Doxycycline, USP is a light-yellow crystalline powder. Doxycycline hyclate, USP is soluble in water. Doxycycline, USP has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline, USP will not degrade into an epianhydro form. Inert ingredients in the capsule formulations are: magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. The hard gelatin capsule shells contains: FD&C Blue 1, gelatin, sodium lauryl sulfate and titanium dioxide. The printing ink contains: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>69238-1118-2</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (69238-1118-2) </PackageDescription>
<NDC11Code>69238-1118-02</NDC11Code>
<ProductNDC>69238-1118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hcl</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208829</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling "on edge," irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride, USP is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Each tablet, for oral administration, contains 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>69238-1202-2</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (69238-1202-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>69238-1202-02</NDC11Code>
<ProductNDC>69238-1202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211586</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>69238-1203-2</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (69238-1203-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>69238-1203-02</NDC11Code>
<ProductNDC>69238-1203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211586</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>69238-1205-2</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (69238-1205-2) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>69238-1205-02</NDC11Code>
<ProductNDC>69238-1205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211586</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine transdermal system is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including buprenorphine transdermal system, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Buprenorphine transdermal system is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14- ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of buprenorphine transdermal system are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. Table 6: Buprenorphine Transdermal System Product Specifications. Buprenorphine transdermal system is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of Buprenorphine Transdermal System (not to scale). The active ingredient in buprenorphine transdermal system is buprenorphine. The inactive ingredients in each system are: acrylic adhesive, levulinic acid, oleyl oleate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>69238-1271-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (69238-1271-2) / 120 g in 1 TUBE</PackageDescription>
<NDC11Code>69238-1271-02</NDC11Code>
<ProductNDC>69238-1271</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211111</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluocinonide Cream, 0.1% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses in patients 12 years of age or older. (1). Limitation of Use: : 1 Treatment beyond 2 consecutive weeks is not recommended and the total dosage should not exceed 60 g per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. (1), 2 Avoid use on the face, groin, or axillae. (1.2), 3 Avoid use in perioral dermatitis or rosacea. .</IndicationAndUsage>
<Description>Fluocinonide Cream, USP, 0.1% contains fluocinonide, USP, a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory and antipruritic agents. Fluocinonide, USP has the chemical name 6α, 9-Difluoro-11ß, 16α, 17,21-tetrahydroxypregna-1, 4-diene-3,20-dione, cyclic 16,17-acetal with acetone, 21-acetate. Its chemical formula is C26H32F2O7 and it has a molecular weight of 494.52. It has the following chemical structure. Fluocinonide, USP is an almost odorless white to creamy white crystalline powder. It is practically insoluble in water and slightly soluble in ethanol. Each gram of Fluocinonide Cream, USP 0.1% contains 1 mg micronized fluocinonide, USP in a cream base of propylene glycol USP, diethylene glycol monoethyl ether NF, glyceryl stearate (and) PEG-100 stearate, glyceryl monostearate NF, purified water USP, carbomer homopolymer Type C NF (carbopol 980), diisopropanolamine, and anhydrous citric acid USP.</Description>
</NDC>
<NDC>
<NDCCode>69238-1303-2</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (69238-1303-2) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69238-1303-02</NDC11Code>
<ProductNDC>69238-1303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209613</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21 g/mol, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is sparingly soluble in acetone, slightly soluble in ethanol and practically insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of colloidal anhydrous silica, FD & C Blue # 2/indigo carmine aluminum lake, hypromellose, polyethylene glycol, titanium dioxide and in addition to these, the 7 mg tablet film coating includes iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>69238-1304-2</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (69238-1304-2) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69238-1304-02</NDC11Code>
<ProductNDC>69238-1304</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209613</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21 g/mol, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is sparingly soluble in acetone, slightly soluble in ethanol and practically insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet is made of colloidal anhydrous silica, FD & C Blue # 2/indigo carmine aluminum lake, hypromellose, polyethylene glycol, titanium dioxide and in addition to these, the 7 mg tablet film coating includes iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>69238-1373-2</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (69238-1373-2) / 2.5 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>69238-1373-02</NDC11Code>
<ProductNDC>69238-1373</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin And Dexamethasone</ProprietaryName>
<NonProprietaryName>Tobramycin And Dexamethasone</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212991</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>DEXAMETHASONE; TOBRAMYCIN</SubstanceName>
<StrengthNumber>1; 3</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin and dexamethasone ophthalmic suspension is indicated for steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where superficial bacterial ocular infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns, or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of superficial ocular infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens. Staphylococci, including S. aureus and S. epidermidis (coagulase-positive and coagulase-negative), including penicillin-resistant strains. Streptococci, including some of the Group A-beta-hemolytic species, some nonhemolytic species, and some Streptococcus pneumoniae. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Enterobacter aerogenes, Proteus mirabilis, Morganella morganii, most Proteus vulgaris strains, Haemophilus influenzae and H. aegyptius, Moraxella lacunata, Acinetobacter calcoaceticus and some Neisseria species.</IndicationAndUsage>
<Description>Tobramycin and dexamethasone ophthalmic suspension, USP is a sterile, multiple-dose antibiotic and steroid combination for topical ophthalmic use.The chemical structures for tobramycin and dexamethasone are presented below. Tobramycin, USP. Tobramycin, USP is a white to off-white, hygroscopic powder. It is freely soluble in water, very slightly soluble in alcohol, practically insoluble in chloroform and in ether. Chemical Structure:. Molecular Formula: C18H37N5O9Molecular Weight: 467.51Chemical Name: O-3-Amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl (1→6)]-2-deoxy-L-streptamine. Dexamethasone, USP. Dexamethasone, USP (Micronised) is a white or practically white crystalline powder. Chemical Structure. Molecular Formula: C22H29FO5Molecular Weight: 392.46Chemical Name: 9-Fluoro-11ß,17,21-trihydroxy-16α-methylpregna-1,4-diene-3,20-dione. Each mL of tobramycin and dexamethasone ophthalmic suspension, USP contains. Active: tobramycin, USP 0.3% (3 mg) and dexamethasone, USP 0.1% (1 mg). Preservative: benzalkonium chloride 0.01%. Inactives: tyloxapol, edetate disodium, sodium chloride, hydroxyethyl cellulose, sodium sulfate, sulfuric acid and/or sodium hydroxide (to adjust pH) and water for injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>69238-1422-2</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (69238-1422-2) / 20 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>69238-1422-02</NDC11Code>
<ProductNDC>69238-1422</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naproxen Sodium And Diphenhydramine Hcl</ProprietaryName>
<NonProprietaryName>Naproxen Sodium And Diphenhydramine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209726</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>NAPROXEN SODIUM; DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>220; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for relief of occasional sleeplessness when associated with minor aches and pains. helps you fall asleep and stay asleep.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69238-1458-2</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (69238-1458-2) </PackageDescription>
<NDC11Code>69238-1458-02</NDC11Code>
<ProductNDC>69238-1458</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210041</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride oral solution is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.</IndicationAndUsage>
<Description>Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose.</Description>
</NDC>
<NDC>
<NDCCode>69238-1459-2</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (69238-1459-2) </PackageDescription>
<NDC11Code>69238-1459-02</NDC11Code>
<ProductNDC>69238-1459</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210041</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/15mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride oral solution is indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction are insufficient.</IndicationAndUsage>
<Description>Potassium chloride, USP is a white granular powder. It is freely soluble in water and insoluble in alcohol. Chemically, potassium chloride, USP is K-Cl with a molecular mass of 74.55. Oral Solution 10%: Each 15 mL of solution contains 1.5 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose. Oral Solution 20%: Each 15 mL of solution contains 3 g of potassium chloride, USP and the following inactive ingredients: citric acid anhydrous, FD&C Yellow #6, glycerin, methylparaben, natural/artificial orange flavor, propylene glycol, propylparaben, purified water, sodium citrate, sucralose.</Description>
</NDC>
<NDC>
<NDCCode>69238-1504-2</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (69238-1504-2) </PackageDescription>
<NDC11Code>69238-1504-02</NDC11Code>
<ProductNDC>69238-1504</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin Ethylsuccinate</ProprietaryName>
<NonProprietaryName>Erythromycin</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211204</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ERYTHROMYCIN ETHYLSUCCINATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin ethylsuccinate for oral suspension and other antibacterial drugs, erythromycin ethylsuccinate for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin ethylsuccinate for oral suspension is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below:. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae, or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes. Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute Pelvic Inflammatory Disease Caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis Caused by Treponema pallidum: Erythromycin is an alternate choice of treatment for primary syphilis in penicillin-allergic patients. In primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: Conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease. Prophylaxis. Prevention of Initial Attacks of Rheumatic Fever. Penicillin is considered by the American Heart Association to be the drug of choice in the prevention of initial attacks of rheumatic fever (treatment of Streptococcus pyogenes infections of the upper respiratory tract, e.g., tonsillitis or pharyngitis). Erythromycin is indicated for the treatment of penicillin-allergic patients.4 The therapeutic dose should be administered for 10 days. Prevention of Recurrent Attacks of Rheumatic Fever. Penicillin or sulfonamides are considered by the American Heart Association to be the drugs of choice in the prevention of recurrent attacks of rheumatic fever. In patients who are allergic to penicillin and sulfonamides, oral erythromycin is recommended by the American Heart Association in the long-term prophylaxis of Streptococcal pharyngitis (for the prevention of recurrent attacks of rheumatic fever).4.</IndicationAndUsage>
<Description>Erythromycin, USP is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate, USP is an ester of erythromycin, USP suitable for oral administration. Erythromycin ethylsuccinate, USP is known chemically as erythromycin 2′-(ethyl succinate). The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. Erythromycin ethylsuccinate for oral suspension, USP, 200 mg/5 mL when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate, USP equivalent to 200 mg erythromycin, USP per 5 mL (teaspoonful) or 100 mg per 2.5 mL (dropperful) with an appealing fruit flavor. Erythromycin ethylsuccinate for oral suspension, USP, 400 mg/5 mL when reconstituted with water, forms a suspension containing erythromycin ethylsuccinate, USP equivalent to 400 mg of erythromycin, USP per 5 mL (teaspoonful) with an appealing banana flavor. These products are intended primarily for pediatric use but can also be used in adults. Inactive Ingredients. Erythromycin ethylsuccinate for oral suspension, USP, 200 mg/5 mL contains caramel flavor, mixed fruit flavor, polysorbate 80, sodium citrate dihydrate, sucrose, and xanthan gum. Erythromycin ethylsuccinate for oral suspension, USP 400 mg/5 mL contains banana flavor, caramel flavor, polysorbate 80, sodium citrate dihydrate, sucrose, and xanthan gum.</Description>
</NDC>
</NDCList>