RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>69238-1837-7</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (69238-1837-7) </PackageDescription>
    <NDC11Code>69238-1837-07</NDC11Code>
    <ProductNDC>69238-1837</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071001</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021210</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>.137</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levothyroxine sodium is used for the following indications. Hypothyroidism - As replacement or supplemental therapy in congenital or acquired hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. Specific indications include: primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) hypothyroidism and subclinical hypothyroidism. Primary hypothyroidism may result from functional deficiency, primary atrophy, partial or total congenital absence of the thyroid gland, or from the effects of surgery, radiation, or drugs, with or without the presence of goiter. Pituitary TSH Suppression - In the treatment or prevention of various types of euthyroid goiters (see WARNINGS and PRECAUTIONS), including thyroid nodules (see WARNINGS and PRECAUTIONS), subacute or chronic Iymphocytic thyroiditis (Hashimoto's thyroiditis), multinodular goiter (see WARNINGS and PRECAUTIONS), and, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer.</IndicationAndUsage>
    <Description>Levothyroxine Sodium Tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4  H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1837-1</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (69238-1837-1) </PackageDescription>
    <NDC11Code>69238-1837-01</NDC11Code>
    <ProductNDC>69238-1837</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071001</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA021210</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>.137</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levothyroxine sodium is used for the following indications. Hypothyroidism - As replacement or supplemental therapy in congenital or acquired hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. Specific indications include: primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) hypothyroidism and subclinical hypothyroidism. Primary hypothyroidism may result from functional deficiency, primary atrophy, partial or total congenital absence of the thyroid gland, or from the effects of surgery, radiation, or drugs, with or without the presence of goiter. Pituitary TSH Suppression - In the treatment or prevention of various types of euthyroid goiters (see WARNINGS and PRECAUTIONS), including thyroid nodules (see WARNINGS and PRECAUTIONS), subacute or chronic Iymphocytic thyroiditis (Hashimoto's thyroiditis), multinodular goiter (see WARNINGS and PRECAUTIONS), and, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer.</IndicationAndUsage>
    <Description>Levothyroxine Sodium Tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4  H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-1837-7</NDCCode>
    <PackageDescription>28 TABLET, EXTENDED RELEASE in 1 BOTTLE (71335-1837-7) </PackageDescription>
    <NDC11Code>71335-1837-07</NDC11Code>
    <ProductNDC>71335-1837</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211347</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240717</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion Hydrochloride Extended-Release Tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies ( 14)] . The efficacy of Bupropion Hydrochloride Extended-Release Tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies ( 14)] .</IndicationAndUsage>
    <Description>Bupropion Hydrochloride Extended-Release Tablets USP (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1, 1-dimethylethyl) amino]-1­-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion Hydrochloride Extended-Release Tablets USP (SR) are supplied for oral administration as 100-mg (light blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride USP and the inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, L-cysteine hydrochloride monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part hydrolyzed, povidone, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&amp;C blue No. 1 aluminum lake and FD&amp;C blue No. 2 aluminum lake; the 150-mg tablet contains FD&amp;C blue No. 2 aluminum lake and FD&amp;C red No. 40 aluminum lake, and the 200-mg tablet contains FD&amp;C red No. 40 aluminum lake. Bupropion Hydrochloride Extended-Release Tablets, USP (SR) meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-1837-02</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0169-1837-02)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00169-1837-02</NDC11Code>
    <ProductNDC>0169-1837</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Novolin</ProprietaryName>
    <ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
    <NonProprietaryName>Human Insulin</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19910625</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA019991</ApplicationNumber>
    <LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
    <SubstanceName>INSULIN HUMAN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19910625</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.</IndicationAndUsage>
    <Description>Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0169-1837-11</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0169-1837-11)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00169-1837-11</NDC11Code>
    <ProductNDC>0169-1837</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Novolin</ProprietaryName>
    <ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
    <NonProprietaryName>Human Insulin</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19910625</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA019991</ApplicationNumber>
    <LabelerName>Novo Nordisk Pharmaceutical Industries, LP</LabelerName>
    <SubstanceName>INSULIN HUMAN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19910625</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NOVOLIN 70/30 is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus. Limitations of Use. In NOVOLIN 70/30, the proportions of short-acting and intermediate-acting insulins are fixed and do not allow for basal versus prandial dose adjustments.</IndicationAndUsage>
    <Description>Insulin human is produced by recombinant DNA technology, utilizing Saccharomyces cerevisiae (baker’s yeast) as the production organism. The amino acid sequence of insulin human is identical to human insulin and has the empirical formula C257H383N65O77S6 and a molecular weight of 5808 Da. NOVOLIN 70/30 (insulin isophane human and insulin human) injectable suspension is a mixture of 70% of insulin isophane human, an intermediate-acting insulin, and 30% of insulin human, a short-acting insulin. NOVOLIN 70/30 is a suspension of crystals produced from combining insulin human and protamine sulfate under appropriate conditions for crystal formation and mixing with insulin human injection. Figure 1: Structural formula of human insulin. NOVOLIN 70/30 is a sterile, white and cloudy injectable suspension that contains insulin isophane human suspension (NPH) and insulin human injection (regular) for subcutaneous use. Each milliliter of NOVOLIN 70/30 contains 100 units of insulin human, dibasic sodium phosphate (1.9 mg), glycerin (16 mg), metacresol (1.5 mg), phenol (0.65 mg), protamine sulfate (approximately 0.25 mg), zinc (20.5 mcg/mL for the vial or 30.1 mcg for the FlexPen), and Water for Injection. Hydrochloric acid 2N and sodium hydroxide 2N may be added during manufacture to adjust the pH. The pH is 7.1-7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>61589-1837-1</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (61589-1837-1)  &gt; 30 g in 1 BOTTLE</PackageDescription>
    <NDC11Code>61589-1837-01</NDC11Code>
    <ProductNDC>61589-1837</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>No7 Stay Perfect Foundation Sunscreen Broad Spectrum Spf 15 Warm Ivory</ProprietaryName>
    <NonProprietaryName>Octinoxate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20150710</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>BCM Cosmetique SAS</LabelerName>
    <SubstanceName>OCTINOXATE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>g/30g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Directions for suncreen use. apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 monhts of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. limit time in the sun, especially from 10 a.m. - 2 p.m. wear long-sleeved shirts, pants, hats, and sunglasses.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>64725-1837-1</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, GLASS (64725-1837-1)</PackageDescription>
    <NDC11Code>64725-1837-01</NDC11Code>
    <ProductNDC>64725-1837</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Novolin</ProprietaryName>
    <ProprietaryNameSuffix>70/30</ProprietaryNameSuffix>
    <NonProprietaryName>Human Insulin</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19910625</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019991</ApplicationNumber>
    <LabelerName>TYA Pharmaceuticals</LabelerName>
    <SubstanceName>INSULIN HUMAN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>[USP'U]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Talk to your healthcare provider if you have any questions. Your healthcare provider should show you how to inject Novolin 70/30 before you start taking it. Follow your healthcare provider’s instructions to make changes to your insulin dose. Read the instructions for use that come with your Novolin 70/30 product. ®®: 1 Take Novolin 70/30 exactly as prescribed. ®, 2 The effects of Novolin 70/30 start working ½ hour after injection. Novolin 70/30 is an intermediate-acting insulin. ®®, 3 The greatest blood sugar lowering effect is between 2 and 12 hours after the injection. This blood sugar lowering may last up to 24 hours. , 4 , any change of insulin should be made cautiously and only under medical supervision. Doses of oral anti-diabetic medicines may also need to change, if your insulin is changed. While using Novolin 70/30 ®, 5 with any insulins. Do not mix Novolin  70/30 ®, 6 Novolin 70/30 may affect your blood sugar levels sooner if you inject it into the skin of your stomach area. Inject Novolin 70/30 into the skin of your stomach area, upper arms, buttocks or upper legs. ®®Never inject Novolin 70/30 into a vein or into a muscle. ®, 7 Change (rotate) your injection site within the chosen area (for example, stomach or upper arm) with each dose. Do not inject into the same spot for each injection., 8 You can treat mild low blood sugar (hypoglycemia) by drinking or eating something sugary right away (fruit juice, sugar candies, or glucose tablets). It is important to treat low blood sugar (hypoglycemia) right away because it could get worse and you could pass out (become unconscious). If you pass out, you will need help from another person or emergency medical services right away, and will need treatment with a glucagon injection or treatment at a hospital. See “What are the possible side effects of Novolin 70/30?” for more information on low blood sugar (hypoglycemia). If you take too much Novolin 70/30, your blood sugar may fall low (hypoglycemia). ®®, 9 If  high blood sugar (hyperglycemia) is not treated it can lead to diabetic ketoacidosis, which can lead to serious problems, like loss of consciousness (passing out), coma or even death. Follow your healthcare provider’s instructions for treating high blood sugar (hyperglycemia), and talk to your healthcare provider if high blood sugar is a problem for you. Severe or continuing high blood sugar (hyperglycemia) requires prompt evaluation and treatment by your healthcare provider. Know your symptoms of high blood sugar (hyperglycemia) and diabetic ketoacidosis which may include:   If you forget to take your dose of Novolin 70/30, your blood sugar may go too high (hyperglycemia).   ®.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>68071-1837-6</NDCCode>
    <PackageDescription>473 mL in 1 BOTTLE (68071-1837-6) </PackageDescription>
    <NDC11Code>68071-1837-06</NDC11Code>
    <ProductNDC>68071-1837</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Chlorhexidine Gluconate</ProprietaryName>
    <NonProprietaryName>Chlorhexidine Gluconate</NonProprietaryName>
    <DosageFormName>RINSE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077789</ApplicationNumber>
    <LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
    <SubstanceName>CHLORHEXIDINE GLUCONATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Cell Wall Integrity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170816</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Chlorhexidine gluconate oral rinse is indicated for use between dental visits as part of a professional program for the treatment of gingivitis as characterized by redness and swelling of the gingivae, including gingival bleeding upon probing. Chlorhexidine gluconate oral rinse has not been tested among patients with acute necrotizing ulcerative gingivitis (ANUG). For patients having coexisting gingivitis and periodontitis, see  PRECAUTIONS.</IndicationAndUsage>
    <Description>0.12% chlorhexidine gluconate (CHG) is an oral rinse containing (1,1'-hexamethylene bis [5-(p-chlorophenyl) biguanide]di-D-gluconate) in a base containing water, 11 .6% alcohol, glycerin, PEG-40 sorbitan diisostearate, flavor, sodium saccharin, and FD&amp;C Blue No.1. Chlorhexidine gluconate product is a near neutral solution (pH range 5-7). Chlorhexidine gluconate is a salt of chlorhxidine and gluconic acid. Its chemical structure is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1837-5</NDCCode>
    <PackageDescription>5 VIAL in 1 CARTON (70710-1837-5)  / 2 mL in 1 VIAL (70710-1837-1) </PackageDescription>
    <NDC11Code>70710-1837-05</NDC11Code>
    <ProductNDC>70710-1837</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylene Blue</ProprietaryName>
    <NonProprietaryName>Methylene Blue</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20231205</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215636</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>METHYLENE BLUE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Oxidation-Reduction Activity [MoA], Oxidation-Reduction Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Methylene blue injection is indicated for the treatment of pediatric and adult patients with acquired methemoglobinemia.</IndicationAndUsage>
    <Description>Methylene blue, USP is an oxidation-reduction agent. Its chemical name is 3,7-bis(dimethylamino)phenothiazin-5-ium, chloride hydrate. The molecular formula of methylene blue is C16H18ClN3S xH2O and its molecular weight of 319.86 g/mol for the anhydrous form. The structural formula of methylene blue, USP is. Methylene blue injection, USP is a sterile solution intended for intravenous administration. Each mL of solution contains 5 mg methylene blue USP and water for injection USP for strengths 50 mg/10 mL (5 mg/mL) (0.5%) or 10 mg/2 mL (5 mg/mL) (0.5%). Each mL of solution contains 10 mg methylene blue USP and water for injection USP for strength 100 mg/10 mL (10 mg/mL) (1%). Additionally, it contains the excipients sodium citrate dihydrate USP and citric acid anhydrous USP in single dose glass vial for all strengths. Methylene blue injection, USP is a clear dark blue solution with a pH value between 3.0 and 4.5. The osmolality is between 10 and 15 mOsm/kg. Methylene blue injection, USP strength is expressed in terms of trihydrate.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1031-7</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (69238-1031-7)  / 1 KIT in 1 BLISTER PACK (69238-1031-6) </PackageDescription>
    <NDC11Code>69238-1031-07</NDC11Code>
    <ProductNDC>69238-1031</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Melodetta 24 Fe</ProprietaryName>
    <NonProprietaryName>Norethindrone Acetate And Ethinyl Estradiol And Ferrous Fumarate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20170921</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207514</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170921</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Melodetta 24 Fe is indicated for use by females of reproductive age to prevent pregnancy [see Clinical Studies (14)]. The efficacy of Melodetta 24 Fe in women with a body mass index (BMI) of more than 35 kg/m2 has not been evaluated.</IndicationAndUsage>
    <Description>Melodetta 24 Fe provides an oral contraceptive regimen consisting of 24 white active chewable tablets that contain the active ingredients, followed by 4 brown non-hormonal placebo tablets as specified below: : 1 24 white, round tablets each containing 1 mg norethindrone acetate, USP and 20 mcg ethinyl estradiol, USP. , 2 4 brown, round tablets each containing 75 mg ferrous fumarate. .</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1065-7</NDCCode>
    <PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (69238-1065-7) </PackageDescription>
    <NDC11Code>69238-1065-07</NDC11Code>
    <ProductNDC>69238-1065</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Chloride</ProprietaryName>
    <NonProprietaryName>Potassium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200511</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212861</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200511</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. .</IndicationAndUsage>
    <Description>The Potassium Chloride Extended-Release Tablets USP, 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 15 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 10 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Its molecular weight is 74.55 g/mole. Potassium chloride, USP occurs as a white to off-white, crystalline, granular powder. It is freely soluble in water and insoluble in alcohol. Potassium Chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of out-side agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients: croscarmellose sodium, ethyl cellulose, microcrystalline cellulose and triethyl citrate. Meets USP Dissolution Test 7.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1165-7</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE (69238-1165-7) </PackageDescription>
    <NDC11Code>69238-1165-07</NDC11Code>
    <ProductNDC>69238-1165</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Abiraterone Acetate</ProprietaryName>
    <NonProprietaryName>Abiraterone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190107</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208327</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ABIRATERONE ACETATE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Abiraterone acetate tablets are indicated in combination with prednisone for the treatment of patients with : 1 Metastatic castration-resistant prostate cancer (CRPC), 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC).</IndicationAndUsage>
    <Description>Abiraterone acetate USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains either 250 mg or 500 mg of abiraterone acetate, USP. Abiraterone acetate, USP is designated chemically as (3β)-17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is. Abiraterone acetate, USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C26H33NO2 and it has a molecular weight of 391.55. Abiraterone acetate, USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets are available in 250 mg uncoated tablets and 500 mg film-coated tablets with the following inactive ingredients: : 1 250 mg uncoated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate., 2 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, silicified microcrystalline cellulose, and sodium lauryl sulfate. The coating, Opadry® II Purple, contains iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. .</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1293-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1293-7)  / 1 d in 1 POUCH (69238-1293-1) </PackageDescription>
    <NDC11Code>69238-1293-07</NDC11Code>
    <ProductNDC>69238-1293</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20200930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211396</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.0375</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1294-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1294-7)  / 1 d in 1 POUCH (69238-1294-1) </PackageDescription>
    <NDC11Code>69238-1294-07</NDC11Code>
    <ProductNDC>69238-1294</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20200930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211396</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.075</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1295-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1295-7)  / 1 d in 1 POUCH (69238-1295-1) </PackageDescription>
    <NDC11Code>69238-1295-07</NDC11Code>
    <ProductNDC>69238-1295</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20200930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211396</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1296-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1296-7)  / 1 d in 1 POUCH (69238-1296-1) </PackageDescription>
    <NDC11Code>69238-1296-07</NDC11Code>
    <ProductNDC>69238-1296</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20200930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211396</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1308-7</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (69238-1308-7)  / 10 TABLET, FILM COATED in 1 BLISTER PACK (69238-1308-1) </PackageDescription>
    <NDC11Code>69238-1308-07</NDC11Code>
    <ProductNDC>69238-1308</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Solifenacin Succinate</ProprietaryName>
    <NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190520</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209719</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
    <Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-(3R)-1-azabicyclo[2.2.2]oct-3-yl 3,4-dihydro-1-phenyl-2(1H)-iso-quinolinecarboxylate (1:1) having a molecular formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble at room temperature in water, glacial acetic acid, dimethyl sulfoxide, and methanol. Each solifenacin succinate tablet contains 5 mg or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: butylated hydroxyanisole, corn starch, hypromellose, iron oxide yellow (5 mg), iron oxide red (10 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, propyl gallate, titanium dioxide, talc and tartaric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1309-7</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (69238-1309-7)  / 10 TABLET, FILM COATED in 1 BLISTER PACK (69238-1309-1) </PackageDescription>
    <NDC11Code>69238-1309-07</NDC11Code>
    <ProductNDC>69238-1309</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Solifenacin Succinate</ProprietaryName>
    <NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190520</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209719</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
    <Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-(3R)-1-azabicyclo[2.2.2]oct-3-yl 3,4-dihydro-1-phenyl-2(1H)-iso-quinolinecarboxylate (1:1) having a molecular formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble at room temperature in water, glacial acetic acid, dimethyl sulfoxide, and methanol. Each solifenacin succinate tablet contains 5 mg or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: butylated hydroxyanisole, corn starch, hypromellose, iron oxide yellow (5 mg), iron oxide red (10 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, propyl gallate, titanium dioxide, talc and tartaric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1447-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1447-7)  / 1 d in 1 POUCH (69238-1447-1) </PackageDescription>
    <NDC11Code>69238-1447-07</NDC11Code>
    <ProductNDC>69238-1447</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20200930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211396</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.025</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200930</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1521-3</NDCCode>
    <PackageDescription>3 POUCH in 1 CARTON (69238-1521-3)  / 1 PATCH in 1 POUCH (69238-1521-1)  / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>69238-1521-03</NDC11Code>
    <ProductNDC>69238-1521</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Norelgestromin And Ethinly Estradiol</ProprietaryName>
    <NonProprietaryName>Norelgestromin And Ethinly Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20210226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213950</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>NORELGESTROMIN; ETHINYL ESTRADIOL</SubstanceName>
    <StrengthNumber>150; 35</StrengthNumber>
    <StrengthUnit>ug/d; ug/d</StrengthUnit>
    <Pharm_Classes>Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Norelgestromin and ethinyl estradiol transdermal system is indicated for the prevention of pregnancy in women with a body mass index (BMI) &lt; 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Norelgestromin and ethinyl estradiol transdermal system may be less effective in preventing pregnancy in women who weigh 198 lbs (90 kg) or more. Norelgestromin and ethinyl estradiol transdermal system is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].</IndicationAndUsage>
    <Description>Norelgestromin and ethinyl estradiol transdermal system has a contact surface area of 12.5 cm2. It contains 3.15 mg norelgestromin, USP (NGMN) and 0.289 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN, USP and 35 mcg of EE, USP per day. Systemic exposures (as measured by area under the curve [AUC] and steady-state concentration [Css]) of NGMN, USP and EE, USP during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing norgestimate, USP (NGM) 250 mcg / EE, USP 35 mcg [see Boxed Warning and Clinical Pharmacology (12.3)]. Norelgestromin and ethinyl estradiol transdermal system is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a tan backing consisting of pigmented polyethylene and polyester. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains polyisobutylene/polybutene adhesive, polybutene, crospovidone, oleyl alcohol and dipropylene glycol as inactive components. The active components in this layer are the hormones, NGMN, USP and EE, USP. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyethylene terephthalate (PET) film with a silicone coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with “Norelgestromin and Ethinyl Estradiol 150/35 mcg per day” in brown ink. The structural formulas of the components are. Norelgestromin, USP                          ethinyl estradiol, USP. Molecular weight, NGMN, USP: 327.47. Molecular weight, EE, USP: 296.41. Chemical name for NGMN, USP: 18, 19-Dinorpregn-4-en-20-yn-3-one, 13-ethyl-17-hydroxy-,3-oxime,(17α). Chemical name for EE, USP: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17-diol,(17α).</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1524-7</NDCCode>
    <PackageDescription>8 APPLICATOR in 1 CARTON (69238-1524-7)  &gt; 1 TABLET in 1 APPLICATOR</PackageDescription>
    <NDC11Code>69238-1524-07</NDC11Code>
    <ProductNDC>69238-1524</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Yuvafem</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>VAGINAL</RouteName>
    <StartMarketingDate>20160201</StartMarketingDate>
    <EndMarketingDate>20200401</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020908</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL HEMIHYDRATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20160201</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200401</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>69238-1629-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1629-7)  / 1 d in 1 POUCH (69238-1629-1) </PackageDescription>
    <NDC11Code>69238-1629-07</NDC11Code>
    <ProductNDC>69238-1629</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20190204</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211293</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.025</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190204</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1630-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1630-7)  / 1 d in 1 POUCH (69238-1630-1) </PackageDescription>
    <NDC11Code>69238-1630-07</NDC11Code>
    <ProductNDC>69238-1630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20190204</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211293</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.0375</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190204</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1631-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1631-7)  / 1 d in 1 POUCH (69238-1631-1) </PackageDescription>
    <NDC11Code>69238-1631-07</NDC11Code>
    <ProductNDC>69238-1631</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20190204</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211293</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190204</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1632-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1632-7)  / 1 d in 1 POUCH (69238-1632-1) </PackageDescription>
    <NDC11Code>69238-1632-07</NDC11Code>
    <ProductNDC>69238-1632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20190204</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211293</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.075</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190204</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1633-7</NDCCode>
    <PackageDescription>8 POUCH in 1 CARTON (69238-1633-7)  / 1 d in 1 POUCH (69238-1633-1) </PackageDescription>
    <NDC11Code>69238-1633-07</NDC11Code>
    <ProductNDC>69238-1633</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20190204</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211293</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190204</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1642-7</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (69238-1642-7)  / 270 CAPSULE in 1 BOTTLE</PackageDescription>
    <NDC11Code>69238-1642-07</NDC11Code>
    <ProductNDC>69238-1642</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pirfenidone</ProprietaryName>
    <NonProprietaryName>Pirfenidone</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220107</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212569</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>PIRFENIDONE</SubstanceName>
    <StrengthNumber>267</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Pyridone [EPC], Pyridones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pirfenidone capsules are indicated for the treatment of idiopathic pulmonary fibrosis (IPF).</IndicationAndUsage>
    <Description>Pirfenidone, USP belongs to the chemical class of pyridone. Pirfenidone capsules, USP are available as a opaque white to off-white hard gelatin capsule containing 267 mg of pirfenidone, USP for oral administration. Pirfenidone, USP has a molecular formula of C12H11NO and a molecular weight of 185.22 g/mol. Pirfenidone, USP has the following structural formula, which has been referred to as 5-methyl-1-phenylpyridin-2-one. Pirfenidone, USP is a white to pale yellow, non-hygroscopic, crystalline powder. It is sparingly soluble in water, freely soluble in ethanol (96%), and slightly soluble in heptane. The melting point range is 107°C to 111°C. Each pirfenidone capsule, USP contains pirfenidone USP, 267 mg as active ingredient and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. In addition, the capsule shell contains gelatin and titanium dioxide. The capsule is imprinted with black pharmaceutical ink which includes butyl alcohol, dehydrated alcohol, ferrosoferric oxide, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac, and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69238-1720-7</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE, PLASTIC (69238-1720-7) </PackageDescription>
    <NDC11Code>69238-1720-07</NDC11Code>
    <ProductNDC>69238-1720</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Etravirine</ProprietaryName>
    <NonProprietaryName>Etravirine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210614</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214196</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ETRAVIRINE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210614</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>69238-1721-7</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE, PLASTIC (69238-1721-7) </PackageDescription>
    <NDC11Code>69238-1721-07</NDC11Code>
    <ProductNDC>69238-1721</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Etravirine</ProprietaryName>
    <NonProprietaryName>Etravirine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210614</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214196</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ETRAVIRINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210614</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>69238-1729-7</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (69238-1729-7)  / 150 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>69238-1729-07</NDC11Code>
    <ProductNDC>69238-1729</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enalapril Maleate</ProprietaryName>
    <NonProprietaryName>Enalapril</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20191201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212894</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
    <SubstanceName>ENALAPRIL MALEATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enalapril maleate oral solution is an angiotensin-converting enzyme inhibitor indicated for: : 1 treatment of hypertension in adults and children older than one month, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 treatment of symptomatic heart failure. (1.2) , 3 treatment of asymptomatic left ventricular dysfunction, to decrease the rate of development of overt heart failure and reduce hospitalization for heart failure. (1.3) .</IndicationAndUsage>
    <Description>Enalapril maleate (enalapril maleate) oral solution is the maleate salt of enalapril, the ethyl ester prodrug of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, (Z)-2-butenedioate salt (1:1). Its empirical formula is C20H28N2O5C4H4O4, and its structural formula is. Enalapril maleate is an off-white, crystalline powder with a molecular weight of 492.52. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril maleate oral solution is a ready-to-use oral solution. Each 1 mL contains 1 mg of enalapril maleate, USP equivalent to 0.764 mg of enalapril. Inactive ingredients include artificial juicy raspberry flavor, malic acid, purified water, sodium benzoate, and sucralose. Enalapril maleate oral solution is clear and colorless.</Description>
  </NDC>
</NDCList>