{
"NDC": [
{
"NDCCode": "69238-2141-7",
"PackageDescription": "1 BOTTLE in 1 CARTON (69238-2141-7) / 150 mL in 1 BOTTLE",
"NDC11Code": "69238-2141-07",
"ProductNDC": "69238-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalapril Maleate",
"NonProprietaryName": "Enalapril",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA208686",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ENALAPRIL MALEATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220323",
"SamplePackage": "N",
"IndicationAndUsage": "Enalapril maleate oral solution is an angiotensin-converting enzyme inhibitor indicated for: : 1 treatment of hypertension in adults and children older than one month, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1). , 2 treatment of symptomatic heart failure (1.2). , 3 treatment of asymptomatic left ventricular dysfunction, to decrease the rate of development of overt heart failure and reduce hospitalization for heart failure (1.3). .",
"Description": "Enalapril maleate oral solution is the maleate salt of enalapril, the ethyl ester prodrug of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, (Z)-2-butenedioate salt (1:1). Its empirical formula is C20H28N2O5C4H4O4, and its structural formula is. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.52. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril maleate oral solution is a ready-to-use oral solution. Each 1 mL contains 1 mg of enalapril maleate, USP equivalent to 0.764 mg of enalapril. Inactive ingredients include citric acid, mixed berry flavor, purified water, sodium benzoate, sodium citrate, and sucralose. It may also contain hydrochloric acid or sodium hydroxide for pH adjustment. Enalapril maleate oral solution is clear and colorless."
},
{
"NDCCode": "71335-2141-7",
"PackageDescription": "90 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-7) ",
"NDC11Code": "71335-2141-07",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "50090-2141-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-2141-0) ",
"NDC11Code": "50090-2141-00",
"ProductNDC": "50090-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Warfarin Sodium",
"NonProprietaryName": "Warfarin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040616",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20151020",
"SamplePackage": "N",
"IndicationAndUsage": "Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "Warfarin sodium tablets, USP contain warfarin sodium, an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α-acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its structural formula may be represented as follows. C19H15NaO4 M.W. 330.31. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each tablet, for oral administration, contains 1 mg, 2 mg, 2.5 mg, 3 mg, 4 mg, 5 mg, 6 mg, 7.5 mg or 10 mg warfarin sodium, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 1 mg also contains FD&C red no. 40. The 2 mg also contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake. The 2.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 3 mg also contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, and D&C yellow no. 10 aluminum lake. The 4 mg also contains FD&C blue no. 1 aluminum lake and FD&C blue no. 2 aluminum lake. The 5 mg also contains FD&C yellow no. 6 aluminum lake, FD&C red no. 40 aluminum lake and D&C yellow no. 10 aluminum lake. The 6 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 7.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C yellow no. 6 aluminum lake."
},
{
"NDCCode": "50090-2141-1",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-2141-1) ",
"NDC11Code": "50090-2141-01",
"ProductNDC": "50090-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Warfarin Sodium",
"NonProprietaryName": "Warfarin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040616",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190321",
"SamplePackage": "N",
"IndicationAndUsage": "Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "Warfarin sodium tablets, USP contain warfarin sodium, an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α-acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its structural formula may be represented as follows. C19H15NaO4 M.W. 330.31. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each tablet, for oral administration, contains 1 mg, 2 mg, 2.5 mg, 3 mg, 4 mg, 5 mg, 6 mg, 7.5 mg or 10 mg warfarin sodium, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 1 mg also contains FD&C red no. 40. The 2 mg also contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake. The 2.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 3 mg also contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, and D&C yellow no. 10 aluminum lake. The 4 mg also contains FD&C blue no. 1 aluminum lake and FD&C blue no. 2 aluminum lake. The 5 mg also contains FD&C yellow no. 6 aluminum lake, FD&C red no. 40 aluminum lake and D&C yellow no. 10 aluminum lake. The 6 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 7.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C yellow no. 6 aluminum lake."
},
{
"NDCCode": "70518-2141-2",
"PackageDescription": "45 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-2141-2) ",
"NDC11Code": "70518-2141-02",
"ProductNDC": "70518-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079170",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220913",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated.",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula:. The empirical formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium USP is a white to off-white powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: crospovidone, dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin. Meets USP Dissolution Test-2."
},
{
"NDCCode": "71335-2141-1",
"PackageDescription": "60 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-1) ",
"NDC11Code": "71335-2141-01",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "71335-2141-2",
"PackageDescription": "40 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-2) ",
"NDC11Code": "71335-2141-02",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "71335-2141-3",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-3) ",
"NDC11Code": "71335-2141-03",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220729",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "71335-2141-4",
"PackageDescription": "56 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-4) ",
"NDC11Code": "71335-2141-04",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "71335-2141-5",
"PackageDescription": "28 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-5) ",
"NDC11Code": "71335-2141-05",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "71335-2141-6",
"PackageDescription": "20 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-6) ",
"NDC11Code": "71335-2141-06",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "71335-2141-8",
"PackageDescription": "45 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-8) ",
"NDC11Code": "71335-2141-08",
"ProductNDC": "71335-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "72162-2141-1",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (72162-2141-1) ",
"NDC11Code": "72162-2141-01",
"ProductNDC": "72162-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2023-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231012",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin tablets are indicated for: : 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc."
},
{
"NDCCode": "72162-2141-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (72162-2141-5) ",
"NDC11Code": "72162-2141-05",
"ProductNDC": "72162-2141",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2023-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231012",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin tablets are indicated for: : 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc."
},
{
"NDCCode": "69238-1031-7",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (69238-1031-7) / 1 KIT in 1 BLISTER PACK (69238-1031-6) ",
"NDC11Code": "69238-1031-07",
"ProductNDC": "69238-1031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melodetta 24 Fe",
"NonProprietaryName": "Norethindrone Acetate And Ethinyl Estradiol And Ferrous Fumarate",
"DosageFormName": "KIT",
"StartMarketingDate": "20170921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207514",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"Status": "Active",
"LastUpdate": "2023-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170921",
"SamplePackage": "N",
"IndicationAndUsage": "Melodetta 24 Fe is indicated for use by females of reproductive age to prevent pregnancy [see Clinical Studies (14)]. The efficacy of Melodetta 24 Fe in women with a body mass index (BMI) of more than 35 kg/m2 has not been evaluated.",
"Description": "Melodetta 24 Fe provides an oral contraceptive regimen consisting of 24 white active chewable tablets that contain the active ingredients, followed by 4 brown non-hormonal placebo tablets as specified below: : 1 24 white, round tablets each containing 1 mg norethindrone acetate, USP and 20 mcg ethinyl estradiol, USP. , 2 4 brown, round tablets each containing 75 mg ferrous fumarate. ."
},
{
"NDCCode": "69238-1065-7",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (69238-1065-7) ",
"NDC11Code": "69238-1065-07",
"ProductNDC": "69238-1065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212861",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200511",
"SamplePackage": "N",
"IndicationAndUsage": "BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. .",
"Description": "The Potassium Chloride Extended-Release Tablets USP, 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 15 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 10 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Its molecular weight is 74.55 g/mole. Potassium chloride, USP occurs as a white to off-white, crystalline, granular powder. It is freely soluble in water and insoluble in alcohol. Potassium Chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of out-side agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients: croscarmellose sodium, ethyl cellulose, microcrystalline cellulose and triethyl citrate. Meets USP Dissolution Test 7."
},
{
"NDCCode": "69238-1165-7",
"PackageDescription": "120 TABLET in 1 BOTTLE (69238-1165-7) ",
"NDC11Code": "69238-1165-07",
"ProductNDC": "69238-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abiraterone Acetate",
"NonProprietaryName": "Abiraterone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208327",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ABIRATERONE ACETATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190107",
"SamplePackage": "N",
"IndicationAndUsage": "Abiraterone acetate tablets are indicated in combination with prednisone for the treatment of patients with : 1 Metastatic castration-resistant prostate cancer (CRPC), 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC).",
"Description": "Abiraterone acetate USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains either 250 mg or 500 mg of abiraterone acetate, USP. Abiraterone acetate, USP is designated chemically as (3β)-17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is. Abiraterone acetate, USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C26H33NO2 and it has a molecular weight of 391.55. Abiraterone acetate, USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets are available in 250 mg uncoated tablets and 500 mg film-coated tablets with the following inactive ingredients: : 1 250 mg uncoated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate., 2 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, silicified microcrystalline cellulose, and sodium lauryl sulfate. The coating, Opadry® II Purple, contains iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. ."
},
{
"NDCCode": "69238-1293-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1293-7) / 1 d in 1 POUCH (69238-1293-1) ",
"NDC11Code": "69238-1293-07",
"ProductNDC": "69238-1293",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211396",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6."
},
{
"NDCCode": "69238-1294-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1294-7) / 1 d in 1 POUCH (69238-1294-1) ",
"NDC11Code": "69238-1294-07",
"ProductNDC": "69238-1294",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211396",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6."
},
{
"NDCCode": "69238-1295-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1295-7) / 1 d in 1 POUCH (69238-1295-1) ",
"NDC11Code": "69238-1295-07",
"ProductNDC": "69238-1295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211396",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6."
},
{
"NDCCode": "69238-1296-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1296-7) / 1 d in 1 POUCH (69238-1296-1) ",
"NDC11Code": "69238-1296-07",
"ProductNDC": "69238-1296",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211396",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6."
},
{
"NDCCode": "69238-1308-7",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (69238-1308-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK (69238-1308-1) ",
"NDC11Code": "69238-1308-07",
"ProductNDC": "69238-1308",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209719",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-(3R)-1-azabicyclo[2.2.2]oct-3-yl 3,4-dihydro-1-phenyl-2(1H)-iso-quinolinecarboxylate (1:1) having a molecular formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble at room temperature in water, glacial acetic acid, dimethyl sulfoxide, and methanol. Each solifenacin succinate tablet contains 5 mg or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: butylated hydroxyanisole, corn starch, hypromellose, iron oxide yellow (5 mg), iron oxide red (10 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, propyl gallate, titanium dioxide, talc and tartaric acid."
},
{
"NDCCode": "69238-1309-7",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (69238-1309-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK (69238-1309-1) ",
"NDC11Code": "69238-1309-07",
"ProductNDC": "69238-1309",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solifenacin Succinate",
"NonProprietaryName": "Solifenacin Succinate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209719",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "SOLIFENACIN SUCCINATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190520",
"SamplePackage": "N",
"IndicationAndUsage": "Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.",
"Description": "Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-(3R)-1-azabicyclo[2.2.2]oct-3-yl 3,4-dihydro-1-phenyl-2(1H)-iso-quinolinecarboxylate (1:1) having a molecular formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble at room temperature in water, glacial acetic acid, dimethyl sulfoxide, and methanol. Each solifenacin succinate tablet contains 5 mg or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: butylated hydroxyanisole, corn starch, hypromellose, iron oxide yellow (5 mg), iron oxide red (10 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, propyl gallate, titanium dioxide, talc and tartaric acid."
},
{
"NDCCode": "69238-1447-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1447-7) / 1 d in 1 POUCH (69238-1447-1) ",
"NDC11Code": "69238-1447-07",
"ProductNDC": "69238-1447",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20200930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211396",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6."
},
{
"NDCCode": "69238-1521-3",
"PackageDescription": "3 POUCH in 1 CARTON (69238-1521-3) / 1 PATCH in 1 POUCH (69238-1521-1) / 7 d in 1 PATCH",
"NDC11Code": "69238-1521-03",
"ProductNDC": "69238-1521",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norelgestromin And Ethinly Estradiol",
"NonProprietaryName": "Norelgestromin And Ethinly Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20210226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213950",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "NORELGESTROMIN; ETHINYL ESTRADIOL",
"StrengthNumber": "150; 35",
"StrengthUnit": "ug/d; ug/d",
"Pharm_Classes": "Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210226",
"SamplePackage": "N",
"IndicationAndUsage": "Norelgestromin and ethinyl estradiol transdermal system is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Norelgestromin and ethinyl estradiol transdermal system may be less effective in preventing pregnancy in women who weigh 198 lbs (90 kg) or more. Norelgestromin and ethinyl estradiol transdermal system is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].",
"Description": "Norelgestromin and ethinyl estradiol transdermal system has a contact surface area of 12.5 cm2. It contains 3.15 mg norelgestromin, USP (NGMN) and 0.289 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN, USP and 35 mcg of EE, USP per day. Systemic exposures (as measured by area under the curve [AUC] and steady-state concentration [Css]) of NGMN, USP and EE, USP during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing norgestimate, USP (NGM) 250 mcg / EE, USP 35 mcg [see Boxed Warning and Clinical Pharmacology (12.3)]. Norelgestromin and ethinyl estradiol transdermal system is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a tan backing consisting of pigmented polyethylene and polyester. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains polyisobutylene/polybutene adhesive, polybutene, crospovidone, oleyl alcohol and dipropylene glycol as inactive components. The active components in this layer are the hormones, NGMN, USP and EE, USP. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyethylene terephthalate (PET) film with a silicone coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with “Norelgestromin and Ethinyl Estradiol 150/35 mcg per day” in brown ink. The structural formulas of the components are. Norelgestromin, USP ethinyl estradiol, USP. Molecular weight, NGMN, USP: 327.47. Molecular weight, EE, USP: 296.41. Chemical name for NGMN, USP: 18, 19-Dinorpregn-4-en-20-yn-3-one, 13-ethyl-17-hydroxy-,3-oxime,(17α). Chemical name for EE, USP: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17-diol,(17α)."
},
{
"NDCCode": "69238-1524-7",
"PackageDescription": "8 APPLICATOR in 1 CARTON (69238-1524-7) > 1 TABLET in 1 APPLICATOR",
"NDC11Code": "69238-1524-07",
"ProductNDC": "69238-1524",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Yuvafem",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "VAGINAL",
"StartMarketingDate": "20160201",
"EndMarketingDate": "20200401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020908",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL HEMIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Estradiol Congeners [CS],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160201",
"EndMarketingDatePackage": "20200401",
"SamplePackage": "N"
},
{
"NDCCode": "69238-1629-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1629-7) / 1 d in 1 POUCH (69238-1629-1) ",
"NDC11Code": "69238-1629-07",
"ProductNDC": "69238-1629",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211293",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190204",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP."
},
{
"NDCCode": "69238-1630-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1630-7) / 1 d in 1 POUCH (69238-1630-1) ",
"NDC11Code": "69238-1630-07",
"ProductNDC": "69238-1630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211293",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190204",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP."
},
{
"NDCCode": "69238-1631-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1631-7) / 1 d in 1 POUCH (69238-1631-1) ",
"NDC11Code": "69238-1631-07",
"ProductNDC": "69238-1631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211293",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190204",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP."
},
{
"NDCCode": "69238-1632-7",
"PackageDescription": "8 POUCH in 1 CARTON (69238-1632-7) / 1 d in 1 POUCH (69238-1632-1) ",
"NDC11Code": "69238-1632-07",
"ProductNDC": "69238-1632",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211293",
"LabelerName": "Amneal Pharmaceuticals NY LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190204",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69238-2141-7</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (69238-2141-7) / 150 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>69238-2141-07</NDC11Code>
<ProductNDC>69238-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalapril Maleate</ProprietaryName>
<NonProprietaryName>Enalapril</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA208686</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ENALAPRIL MALEATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enalapril maleate oral solution is an angiotensin-converting enzyme inhibitor indicated for: : 1 treatment of hypertension in adults and children older than one month, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1). , 2 treatment of symptomatic heart failure (1.2). , 3 treatment of asymptomatic left ventricular dysfunction, to decrease the rate of development of overt heart failure and reduce hospitalization for heart failure (1.3). .</IndicationAndUsage>
<Description>Enalapril maleate oral solution is the maleate salt of enalapril, the ethyl ester prodrug of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, (Z)-2-butenedioate salt (1:1). Its empirical formula is C20H28N2O5C4H4O4, and its structural formula is. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.52. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril maleate oral solution is a ready-to-use oral solution. Each 1 mL contains 1 mg of enalapril maleate, USP equivalent to 0.764 mg of enalapril. Inactive ingredients include citric acid, mixed berry flavor, purified water, sodium benzoate, sodium citrate, and sucralose. It may also contain hydrochloric acid or sodium hydroxide for pH adjustment. Enalapril maleate oral solution is clear and colorless.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-7</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-7) </PackageDescription>
<NDC11Code>71335-2141-07</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>50090-2141-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-2141-0) </PackageDescription>
<NDC11Code>50090-2141-00</NDC11Code>
<ProductNDC>50090-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Warfarin Sodium</ProprietaryName>
<NonProprietaryName>Warfarin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040616</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>Warfarin sodium tablets, USP contain warfarin sodium, an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α-acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its structural formula may be represented as follows. C19H15NaO4 M.W. 330.31. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each tablet, for oral administration, contains 1 mg, 2 mg, 2.5 mg, 3 mg, 4 mg, 5 mg, 6 mg, 7.5 mg or 10 mg warfarin sodium, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 1 mg also contains FD&C red no. 40. The 2 mg also contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake. The 2.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 3 mg also contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, and D&C yellow no. 10 aluminum lake. The 4 mg also contains FD&C blue no. 1 aluminum lake and FD&C blue no. 2 aluminum lake. The 5 mg also contains FD&C yellow no. 6 aluminum lake, FD&C red no. 40 aluminum lake and D&C yellow no. 10 aluminum lake. The 6 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 7.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C yellow no. 6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>50090-2141-1</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-2141-1) </PackageDescription>
<NDC11Code>50090-2141-01</NDC11Code>
<ProductNDC>50090-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Warfarin Sodium</ProprietaryName>
<NonProprietaryName>Warfarin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040616</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC], Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Warfarin sodium tablets are indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>Warfarin sodium tablets, USP contain warfarin sodium, an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. The chemical name of warfarin sodium is 3-(α-acetonylbenzyl)-4-hydroxycoumarin sodium salt, which is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its structural formula may be represented as follows. C19H15NaO4 M.W. 330.31. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. Each tablet, for oral administration, contains 1 mg, 2 mg, 2.5 mg, 3 mg, 4 mg, 5 mg, 6 mg, 7.5 mg or 10 mg warfarin sodium, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 1 mg also contains FD&C red no. 40. The 2 mg also contains FD&C blue no. 2 aluminum lake and FD&C red no. 40 aluminum lake. The 2.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 3 mg also contains FD&C yellow no. 6 aluminum lake, FD&C blue no. 2 aluminum lake, FD&C red no. 40 aluminum lake, and D&C yellow no. 10 aluminum lake. The 4 mg also contains FD&C blue no. 1 aluminum lake and FD&C blue no. 2 aluminum lake. The 5 mg also contains FD&C yellow no. 6 aluminum lake, FD&C red no. 40 aluminum lake and D&C yellow no. 10 aluminum lake. The 6 mg also contains D&C yellow no. 10 aluminum lake and FD&C blue no. 1 aluminum lake. The 7.5 mg also contains D&C yellow no. 10 aluminum lake and FD&C yellow no. 6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70518-2141-2</NDCCode>
<PackageDescription>45 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-2141-2) </PackageDescription>
<NDC11Code>70518-2141-02</NDC11Code>
<ProductNDC>70518-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079170</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated.</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula:. The empirical formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium USP is a white to off-white powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: crospovidone, dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin. Meets USP Dissolution Test-2.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-1</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-1) </PackageDescription>
<NDC11Code>71335-2141-01</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-2</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-2) </PackageDescription>
<NDC11Code>71335-2141-02</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-3) </PackageDescription>
<NDC11Code>71335-2141-03</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-4</NDCCode>
<PackageDescription>56 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-4) </PackageDescription>
<NDC11Code>71335-2141-04</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-5</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-5) </PackageDescription>
<NDC11Code>71335-2141-05</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-6</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-6) </PackageDescription>
<NDC11Code>71335-2141-06</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>71335-2141-8</NDCCode>
<PackageDescription>45 CAPSULE in 1 BOTTLE, PLASTIC (71335-2141-8) </PackageDescription>
<NDC11Code>71335-2141-08</NDC11Code>
<ProductNDC>71335-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>72162-2141-1</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (72162-2141-1) </PackageDescription>
<NDC11Code>72162-2141-01</NDC11Code>
<ProductNDC>72162-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin tablets are indicated for: : 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>72162-2141-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (72162-2141-5) </PackageDescription>
<NDC11Code>72162-2141-05</NDC11Code>
<ProductNDC>72162-2141</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin tablets are indicated for: : 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>69238-1031-7</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (69238-1031-7) / 1 KIT in 1 BLISTER PACK (69238-1031-6) </PackageDescription>
<NDC11Code>69238-1031-07</NDC11Code>
<ProductNDC>69238-1031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melodetta 24 Fe</ProprietaryName>
<NonProprietaryName>Norethindrone Acetate And Ethinyl Estradiol And Ferrous Fumarate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20170921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207514</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melodetta 24 Fe is indicated for use by females of reproductive age to prevent pregnancy [see Clinical Studies (14)]. The efficacy of Melodetta 24 Fe in women with a body mass index (BMI) of more than 35 kg/m2 has not been evaluated.</IndicationAndUsage>
<Description>Melodetta 24 Fe provides an oral contraceptive regimen consisting of 24 white active chewable tablets that contain the active ingredients, followed by 4 brown non-hormonal placebo tablets as specified below: : 1 24 white, round tablets each containing 1 mg norethindrone acetate, USP and 20 mcg ethinyl estradiol, USP. , 2 4 brown, round tablets each containing 75 mg ferrous fumarate. .</Description>
</NDC>
<NDC>
<NDCCode>69238-1065-7</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (69238-1065-7) </PackageDescription>
<NDC11Code>69238-1065-07</NDC11Code>
<ProductNDC>69238-1065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212861</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g., digitalized patients or patients with significant cardiac arrhythmias. .</IndicationAndUsage>
<Description>The Potassium Chloride Extended-Release Tablets USP, 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 15 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1,125 mg of microencapsulated potassium chloride, USP equivalent to 15 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets USP, 10 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Its molecular weight is 74.55 g/mole. Potassium chloride, USP occurs as a white to off-white, crystalline, granular powder. It is freely soluble in water and insoluble in alcohol. Potassium Chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of out-side agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended-release of potassium chloride. Inactive Ingredients: croscarmellose sodium, ethyl cellulose, microcrystalline cellulose and triethyl citrate. Meets USP Dissolution Test 7.</Description>
</NDC>
<NDC>
<NDCCode>69238-1165-7</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (69238-1165-7) </PackageDescription>
<NDC11Code>69238-1165-07</NDC11Code>
<ProductNDC>69238-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abiraterone Acetate</ProprietaryName>
<NonProprietaryName>Abiraterone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208327</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ABIRATERONE ACETATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 17A1 Inhibitor [EPC], Cytochrome P450 17A1 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abiraterone acetate tablets are indicated in combination with prednisone for the treatment of patients with : 1 Metastatic castration-resistant prostate cancer (CRPC), 2 Metastatic high-risk castration-sensitive prostate cancer (CSPC).</IndicationAndUsage>
<Description>Abiraterone acetate USP, the active ingredient of abiraterone acetate tablets, USP is the acetyl ester of abiraterone. Abiraterone is an inhibitor of CYP17 (17α-hydroxylase/C17,20-lyase). Each abiraterone acetate tablet, USP contains either 250 mg or 500 mg of abiraterone acetate, USP. Abiraterone acetate, USP is designated chemically as (3β)-17-(3-pyridinyl) androsta-5,16-dien-3-yl acetate and its structure is. Abiraterone acetate, USP is a white to off-white, non-hygroscopic, crystalline powder. Its molecular formula is C26H33NO2 and it has a molecular weight of 391.55. Abiraterone acetate, USP is a lipophilic compound with an octanol-water partition coefficient of 5.12 (Log P) and is practically insoluble in water. The pKa of the aromatic nitrogen is 5.19. Abiraterone acetate tablets are available in 250 mg uncoated tablets and 500 mg film-coated tablets with the following inactive ingredients: : 1 250 mg uncoated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium lauryl sulfate., 2 500 mg film-coated tablets: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, silicified microcrystalline cellulose, and sodium lauryl sulfate. The coating, Opadry® II Purple, contains iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. .</Description>
</NDC>
<NDC>
<NDCCode>69238-1293-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1293-7) / 1 d in 1 POUCH (69238-1293-1) </PackageDescription>
<NDC11Code>69238-1293-07</NDC11Code>
<ProductNDC>69238-1293</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211396</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
</NDC>
<NDC>
<NDCCode>69238-1294-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1294-7) / 1 d in 1 POUCH (69238-1294-1) </PackageDescription>
<NDC11Code>69238-1294-07</NDC11Code>
<ProductNDC>69238-1294</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211396</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
</NDC>
<NDC>
<NDCCode>69238-1295-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1295-7) / 1 d in 1 POUCH (69238-1295-1) </PackageDescription>
<NDC11Code>69238-1295-07</NDC11Code>
<ProductNDC>69238-1295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211396</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
</NDC>
<NDC>
<NDCCode>69238-1296-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1296-7) / 1 d in 1 POUCH (69238-1296-1) </PackageDescription>
<NDC11Code>69238-1296-07</NDC11Code>
<ProductNDC>69238-1296</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211396</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
</NDC>
<NDC>
<NDCCode>69238-1308-7</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (69238-1308-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK (69238-1308-1) </PackageDescription>
<NDC11Code>69238-1308-07</NDC11Code>
<ProductNDC>69238-1308</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209719</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-(3R)-1-azabicyclo[2.2.2]oct-3-yl 3,4-dihydro-1-phenyl-2(1H)-iso-quinolinecarboxylate (1:1) having a molecular formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble at room temperature in water, glacial acetic acid, dimethyl sulfoxide, and methanol. Each solifenacin succinate tablet contains 5 mg or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: butylated hydroxyanisole, corn starch, hypromellose, iron oxide yellow (5 mg), iron oxide red (10 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, propyl gallate, titanium dioxide, talc and tartaric acid.</Description>
</NDC>
<NDC>
<NDCCode>69238-1309-7</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (69238-1309-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK (69238-1309-1) </PackageDescription>
<NDC11Code>69238-1309-07</NDC11Code>
<ProductNDC>69238-1309</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solifenacin Succinate</ProprietaryName>
<NonProprietaryName>Solifenacin Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209719</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>SOLIFENACIN SUCCINATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Solifenacin succinate tablets are indicated for the treatment of adults with overactive bladder with symptoms of urge urinary incontinence, urgency, and urinary frequency.</IndicationAndUsage>
<Description>Solifenacin succinate is a muscarinic receptor antagonist. Chemically, solifenacin succinate is a butanedioic acid compound with (1S)-(3R)-1-azabicyclo[2.2.2]oct-3-yl 3,4-dihydro-1-phenyl-2(1H)-iso-quinolinecarboxylate (1:1) having a molecular formula of C23H26N2O2C4H6O4, and a molecular weight of 480.55. The structural formula of solifenacin succinate is. Solifenacin succinate is a white to pale-yellowish-white crystal or crystalline powder. It is freely soluble at room temperature in water, glacial acetic acid, dimethyl sulfoxide, and methanol. Each solifenacin succinate tablet contains 5 mg or 10 mg of solifenacin succinate and is for oral administration. In addition to the active ingredient solifenacin succinate, each solifenacin succinate tablet also contains the following inactive ingredients: butylated hydroxyanisole, corn starch, hypromellose, iron oxide yellow (5 mg), iron oxide red (10 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, propyl gallate, titanium dioxide, talc and tartaric acid.</Description>
</NDC>
<NDC>
<NDCCode>69238-1447-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1447-7) / 1 d in 1 POUCH (69238-1447-1) </PackageDescription>
<NDC11Code>69238-1447-07</NDC11Code>
<ProductNDC>69238-1447</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20200930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211396</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system USP, contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39. Estradiol transdermal system USP, is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. Meets USP Drug Release Test 6.</Description>
</NDC>
<NDC>
<NDCCode>69238-1521-3</NDCCode>
<PackageDescription>3 POUCH in 1 CARTON (69238-1521-3) / 1 PATCH in 1 POUCH (69238-1521-1) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>69238-1521-03</NDC11Code>
<ProductNDC>69238-1521</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norelgestromin And Ethinly Estradiol</ProprietaryName>
<NonProprietaryName>Norelgestromin And Ethinly Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20210226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213950</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>NORELGESTROMIN; ETHINYL ESTRADIOL</SubstanceName>
<StrengthNumber>150; 35</StrengthNumber>
<StrengthUnit>ug/d; ug/d</StrengthUnit>
<Pharm_Classes>Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norelgestromin and ethinyl estradiol transdermal system is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Norelgestromin and ethinyl estradiol transdermal system may be less effective in preventing pregnancy in women who weigh 198 lbs (90 kg) or more. Norelgestromin and ethinyl estradiol transdermal system is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Norelgestromin and ethinyl estradiol transdermal system has a contact surface area of 12.5 cm2. It contains 3.15 mg norelgestromin, USP (NGMN) and 0.289 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN, USP and 35 mcg of EE, USP per day. Systemic exposures (as measured by area under the curve [AUC] and steady-state concentration [Css]) of NGMN, USP and EE, USP during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing norgestimate, USP (NGM) 250 mcg / EE, USP 35 mcg [see Boxed Warning and Clinical Pharmacology (12.3)]. Norelgestromin and ethinyl estradiol transdermal system is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a tan backing consisting of pigmented polyethylene and polyester. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains polyisobutylene/polybutene adhesive, polybutene, crospovidone, oleyl alcohol and dipropylene glycol as inactive components. The active components in this layer are the hormones, NGMN, USP and EE, USP. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyethylene terephthalate (PET) film with a silicone coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with “Norelgestromin and Ethinyl Estradiol 150/35 mcg per day” in brown ink. The structural formulas of the components are. Norelgestromin, USP ethinyl estradiol, USP. Molecular weight, NGMN, USP: 327.47. Molecular weight, EE, USP: 296.41. Chemical name for NGMN, USP: 18, 19-Dinorpregn-4-en-20-yn-3-one, 13-ethyl-17-hydroxy-,3-oxime,(17α). Chemical name for EE, USP: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17-diol,(17α).</Description>
</NDC>
<NDC>
<NDCCode>69238-1524-7</NDCCode>
<PackageDescription>8 APPLICATOR in 1 CARTON (69238-1524-7) > 1 TABLET in 1 APPLICATOR</PackageDescription>
<NDC11Code>69238-1524-07</NDC11Code>
<ProductNDC>69238-1524</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Yuvafem</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>VAGINAL</RouteName>
<StartMarketingDate>20160201</StartMarketingDate>
<EndMarketingDate>20200401</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020908</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL HEMIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160201</StartMarketingDatePackage>
<EndMarketingDatePackage>20200401</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69238-1629-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1629-7) / 1 d in 1 POUCH (69238-1629-1) </PackageDescription>
<NDC11Code>69238-1629-07</NDC11Code>
<ProductNDC>69238-1629</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211293</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>69238-1630-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1630-7) / 1 d in 1 POUCH (69238-1630-1) </PackageDescription>
<NDC11Code>69238-1630-07</NDC11Code>
<ProductNDC>69238-1630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211293</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>69238-1631-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1631-7) / 1 d in 1 POUCH (69238-1631-1) </PackageDescription>
<NDC11Code>69238-1631-07</NDC11Code>
<ProductNDC>69238-1631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211293</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>69238-1632-7</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (69238-1632-7) / 1 d in 1 POUCH (69238-1632-1) </PackageDescription>
<NDC11Code>69238-1632-07</NDC11Code>
<ProductNDC>69238-1632</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211293</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals NY LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP contains estradiol, USP in a multipolymeric adhesive. The system is designed to release estradiol, USP continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system, USP are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol, USP per day via the skin. Each corresponding system has an active surface area of 1.89, 2.83, 3.78, 5.66, or 7.55 cm2 and contains 0.314, 0.470, 0.627, 0.940, or 1.253 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol, USP is a white to practically white powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol, USP is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system, USP is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) polyester and ethylene vinyl acetate copolymer film (2) an adhesive formulation containing estradiol USP, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol, USP. The remaining components of the system are pharmacologically inactive. FDA approved acceptance criteria for dissolution test specifications differ from USP.</Description>
</NDC>
</NDCList>