{
"NDC": [
{
"NDCCode": "69339-168-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (69339-168-03) ",
"NDC11Code": "69339-0168-03",
"ProductNDC": "69339-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gefitinib",
"NonProprietaryName": "Gefitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230605",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212827",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "GEFITINIB",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230605",
"SamplePackage": "N",
"IndicationAndUsage": "Gefitinib tablets are indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test [see Clinical Studies (14)]. Limitation of Use: Safety and efficacy of gefitinib tablets have not been established in patients with metastatic NSCLC whose tumors have EGFR mutations other than exon 19 deletions or exon 21 (L858R) substitution mutations [seeClinical Studies (14)].",
"Description": "Gefitinib is a kinase inhibitor. The chemical name of gefitinib is N-(3ʹ-Chloro-4ʹ-fluorophenyl)-7-methoxy-6-{3-(4- morpholinyl)proproxy}-4-quinazolinamine and the following structural formula. Gefitinib has the molecular formula C22H24ClFN4O3, a relative molecular mass of 446.9 daltons and is a White to off-white crystalline powder. Gefitinib is a free base. The molecule has pKa1 is 6.5 & pKa2 is 6.9. Gefitinib can be defined as soluble at pH 1, but insoluble above pH 7, freely soluble in dimethylformamide and acetic acid, slightly soluble in methanol. Gefitinib tablets are available as brown film-coated tablets, containing 250 mg of gefitinib, for oral administration. The inactive ingredients of the tablet core of gefitinib tablets are lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, povidone, and sodium lauryl sulfate and magnesium stearate. Tablet coating contains: polyvinyl alcohol, polyethylene glycol/PEG, talc, titanium dioxide, yellow iron oxide and red iron oxide."
},
{
"NDCCode": "69339-136-34",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (69339-136-34) / 2 mL in 1 SYRINGE, GLASS (69339-136-03) ",
"NDC11Code": "69339-0136-34",
"ProductNDC": "69339-136",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210363",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. As an adjunct prior to endoscopic procedures if apprehension, anxiety or acute stress reactions are present, and to diminish the patient's recall of the procedures (See WARNINGS). Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; stiff-man syndrome; and tetanus. Diazepam injection is a useful adjunct in status epilepticus. Diazepam is a useful premedication (the intramuscular route is preferred) for relief of anxiety and tension in patients who are to undergo surgical procedures. Intravenously, prior to cardioversion for the relief of anxiety and tension and to diminish the patient's recall of the procedure.",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5- phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless crystalline compound, insoluble in water, with a molecular weight of 284.74 and with the following molecular structure. M.W. 284.74Diazepam Injection, USP is a sterile solution and each mL contains 5 mg diazepam compounded with 40% propylene glycol, 10% alcohol, 5% sodium benzoate and benzoic acid as buffers, and 1.5% benzyl alcohol as preservative."
},
{
"NDCCode": "69339-169-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-169-03) ",
"NDC11Code": "69339-0169-03",
"ProductNDC": "69339-169",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209555",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240102",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is sparingly soluble in acetone, slightly soluble in polyethylene glycol and ethanol, very slightly soluble in isopropanol and practically insoluble in water.Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The film coating for the 14 mg tablet is made of FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, polyethylene glycol, talc and titanium dioxide. In addition to these, the 7 mg tablet film coating includes iron oxide yellow."
},
{
"NDCCode": "69339-170-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-170-03) ",
"NDC11Code": "69339-0170-03",
"ProductNDC": "69339-170",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209555",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "14",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240102",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is sparingly soluble in acetone, slightly soluble in polyethylene glycol and ethanol, very slightly soluble in isopropanol and practically insoluble in water.Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The film coating for the 14 mg tablet is made of FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, polyethylene glycol, talc and titanium dioxide. In addition to these, the 7 mg tablet film coating includes iron oxide yellow."
},
{
"NDCCode": "69339-171-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-171-03) ",
"NDC11Code": "69339-0171-03",
"ProductNDC": "69339-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221024",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077851",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221024",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.5. Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 4 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, triacetin, and iron oxide yellow (8 mg tablet only). This product meets USP Dissolution Test 3."
},
{
"NDCCode": "69339-172-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-172-03) ",
"NDC11Code": "69339-0172-03",
"ProductNDC": "69339-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221024",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077851",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221024",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.5. Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 4 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, triacetin, and iron oxide yellow (8 mg tablet only). This product meets USP Dissolution Test 3."
},
{
"NDCCode": "69339-177-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-177-03) ",
"NDC11Code": "69339-0177-03",
"ProductNDC": "69339-177",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Armodafinil",
"NonProprietaryName": "Armodafinil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202768",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "ARMODAFINIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230323",
"SamplePackage": "N",
"IndicationAndUsage": "Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.",
"Description": "Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch."
},
{
"NDCCode": "69339-178-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-178-03) ",
"NDC11Code": "69339-0178-03",
"ProductNDC": "69339-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Armodafinil",
"NonProprietaryName": "Armodafinil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202768",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "ARMODAFINIL",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230323",
"SamplePackage": "N",
"IndicationAndUsage": "Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.",
"Description": "Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch."
},
{
"NDCCode": "69339-179-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-179-03) ",
"NDC11Code": "69339-0179-03",
"ProductNDC": "69339-179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Armodafinil",
"NonProprietaryName": "Armodafinil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202768",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "ARMODAFINIL",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230323",
"SamplePackage": "N",
"IndicationAndUsage": "Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.",
"Description": "Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch."
},
{
"NDCCode": "69339-180-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (69339-180-03) ",
"NDC11Code": "69339-0180-03",
"ProductNDC": "69339-180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Armodafinil",
"NonProprietaryName": "Armodafinil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202768",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "ARMODAFINIL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230323",
"SamplePackage": "N",
"IndicationAndUsage": "Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.",
"Description": "Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch."
},
{
"NDCCode": "69339-181-03",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-181-03) ",
"NDC11Code": "69339-0181-03",
"ProductNDC": "69339-181",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20231014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091537",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231014",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "69339-182-03",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-182-03) ",
"NDC11Code": "69339-0182-03",
"ProductNDC": "69339-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20231014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091537",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231014",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "69339-183-03",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-183-03) ",
"NDC11Code": "69339-0183-03",
"ProductNDC": "69339-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20231014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091537",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231014",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "69339-184-03",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-184-03) ",
"NDC11Code": "69339-0184-03",
"ProductNDC": "69339-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20231014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091537",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231014",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "69339-185-03",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-185-03) ",
"NDC11Code": "69339-0185-03",
"ProductNDC": "69339-185",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20231014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091537",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231014",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "69339-186-03",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-186-03) ",
"NDC11Code": "69339-0186-03",
"ProductNDC": "69339-186",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20231014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091537",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231014",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "69339-236-03",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (69339-236-03) ",
"NDC11Code": "69339-0236-03",
"ProductNDC": "69339-236",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bisoprolol Fumarate",
"NonProprietaryName": "Bisoprolol Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075831",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "BISOPROLOL FUMARATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241125",
"SamplePackage": "N",
"IndicationAndUsage": "Bisoprolol fumarate is indicated in the management of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "BISOPROLOL FUMARATE USP is a synthetic, beta1-selective (cardioselective) adrenoceptor blocking agent. The chemical name for bisoprolol fumarate is (±)-1-[4-[[2- (1-Methylethoxy)ethoxy]methyl]phenoxy]-3-[(1-methylethyl)amino]-2-propanol (E)-2- butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta- blocking activity. Its molecular formula is (C18H31NO4)2C4H4O4 and its structure is. Bisoprolol fumarate has a molecular weight of 766.97. It is a white crystalline powder which is approximately equally hydrophilic and lipophilic, and is readily soluble in water, methanol, ethanol, and chloroform. Bisoprolol fumarate tablets USP are available as 5 and 10 mg tablets for oral administration. Inactive ingredients include Colloidal Silicon Dioxide, Corn Starch (Pregelatinized), Crospovidone, Dibasic Calcium Phosphate, Hypromelloses, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polysorbate 80 and Titanium Dioxide. The 5 mg tablets also contain Red and Yellow Iron Oxide."
},
{
"NDCCode": "69339-237-03",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (69339-237-03) ",
"NDC11Code": "69339-0237-03",
"ProductNDC": "69339-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bisoprolol Fumarate",
"NonProprietaryName": "Bisoprolol Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075831",
"LabelerName": "Natco Pharma USA LLC",
"SubstanceName": "BISOPROLOL FUMARATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241125",
"SamplePackage": "N",
"IndicationAndUsage": "Bisoprolol fumarate is indicated in the management of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "BISOPROLOL FUMARATE USP is a synthetic, beta1-selective (cardioselective) adrenoceptor blocking agent. The chemical name for bisoprolol fumarate is (±)-1-[4-[[2- (1-Methylethoxy)ethoxy]methyl]phenoxy]-3-[(1-methylethyl)amino]-2-propanol (E)-2- butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta- blocking activity. Its molecular formula is (C18H31NO4)2C4H4O4 and its structure is. Bisoprolol fumarate has a molecular weight of 766.97. It is a white crystalline powder which is approximately equally hydrophilic and lipophilic, and is readily soluble in water, methanol, ethanol, and chloroform. Bisoprolol fumarate tablets USP are available as 5 and 10 mg tablets for oral administration. Inactive ingredients include Colloidal Silicon Dioxide, Corn Starch (Pregelatinized), Crospovidone, Dibasic Calcium Phosphate, Hypromelloses, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polysorbate 80 and Titanium Dioxide. The 5 mg tablets also contain Red and Yellow Iron Oxide."
},
{
"NDCCode": "10825-002-03",
"PackageDescription": "168 L in 1 DEWAR (10825-002-03)",
"NDC11Code": "10825-0002-03",
"ProductNDC": "10825-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19740101",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "Northern Welding Supply",
"SubstanceName": "OXYGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "11534-168-03",
"PackageDescription": "1000 TABLET in 1 BOTTLE (11534-168-03)",
"NDC11Code": "11534-0168-03",
"ProductNDC": "11534-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204713",
"LabelerName": "SUNRISE PHARMACEUTICAL, INC",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Antihistamine [EPC],Cholinergic Antagonists [MoA],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-12-07",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "55289-168-03",
"PackageDescription": "3 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55289-168-03) ",
"NDC11Code": "55289-0168-03",
"ProductNDC": "55289-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famciclovir",
"NonProprietaryName": "Famciclovir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077487",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "FAMCICLOVIR",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110414",
"SamplePackage": "N",
"IndicationAndUsage": "Famciclovir tablets, a prodrug of penciclovir, are a deoxynucleoside analog DNA polymerase inhibitor indicated for. Immunocompetent Adult Patients( 1.1) : 1 Herpes labialis (cold sores) Treatment of recurrent episodes, 2 Genital herpes Treatment of recurrent episodesSuppressive therapy of recurrent episodes, 3 Herpes zoster (shingles).",
"Description": "Famciclovir Tablets, USP contain famciclovir, USP, an orally administered prodrug of the antiviral agent penciclovir. Chemically, famciclovir, USP is known as 2-[2-(2-amino-9 H-purin-9-yl)ethyl]-1,3-propanediol diacetate. It is a synthetic acyclic guanine derivative and has the following structure:. C 14H 19N 5O 4M.W. 321.3. Famciclovir, USP is a white to pale yellow solid. It is freely soluble in acetone and methanol, and sparingly soluble in ethanol and isopropanol. At 25°C famciclovir, USP is freely soluble (greater than 25% w/v) in water initially, but rapidly precipitates as the sparingly soluble (2% to 3% w/v) monohydrate. Famciclovir, USP is not hygroscopic below 85% relative humidity. Partition coefficients are: octanol/water (pH 4.8) P= 1.09 and octanol/phosphate buffer (pH 7.4) P= 2.08. Each white, film-coated tablet contains famciclovir, USP. The 125 mg and 250 mg tablets are round; the 500 mg tablets are capsule-shaped. Inactive ingredients consist of croscarmellose sodium, hydroxypropyl cellulose, hypromellose, polydextrose, polyethylene glycol, silicified microcrystalline cellulose, sodium starch glycolate, sodium stearyl fumarate, titanium dioxide, and triacetin. Product meets USP Dissolution Test 2."
},
{
"NDCCode": "63304-168-03",
"PackageDescription": "10 TABLET, COATED in 1 BOTTLE (63304-168-03)",
"NDC11Code": "63304-0168-03",
"ProductNDC": "63304-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077977",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Major Depressive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-Compulsive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive-compulsive disorder (OCD), as defined in the DSM-III-R; i.e., the obsessions or compulsions cause marked distress, are time-consuming, or significantly interfere with social or occupational functioning. The efficacy of sertraline hydrochloride was established in 12-week trials with obsessive-compulsive outpatients having diagnoses of obsessive-compulsive disorder as defined according to DSM-III or DSM-III-R criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-compulsive disorder is characterized by recurrent and persistent ideas, thoughts, impulses, or images (obsessions) that are ego-dystonic and/or repetitive, purposeful, and intentional behaviors (compulsions) that are recognized by the person as excessive or unreasonable. The efficacy of sertraline hydrochloride in maintaining a response, in patients with OCD who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Panic Disorder–Sertraline hydrochloride is indicated for the treatment of panic disorder in adults, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of sertraline hydrochloride was established in three 10 to 12 week trials in adult panic disorder patients whose diagnoses corresponded to the DSM-III-R category of panic disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, i.e., a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The efficacy of sertraline hydrochloride in maintaining a response, in adult patients with panic disorder who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Posttraumatic Stress Disorder (PTSD)–Sertraline hydrochloride is indicated for the treatment of posttraumatic stress disorder in adults. The efficacy of sertraline hydrochloride in the treatment of PTSD was established in two 12-week placebo-controlled trials of adult outpatients whose diagnosis met criteria for the DSM-III-R category of PTSD (see Clinical Trials under CLINICAL PHARMACOLOGY). PTSD, as defined by DSM-III-R/IV, requires exposure to a traumatic event that involved actual or threatened death or serious injury, or threat to the physical integrity of self or others, and a response which involves intense fear, helplessness, or horror. Symptoms that occur as a result of exposure to the traumatic event include reexperiencing of the event in the form of intrusive thoughts, flashbacks or dreams, and intense psychological distress and physiological reactivity on exposure to cues to the event; avoidance of situations reminiscent of the traumatic event, inability to recall details of the event, and/or numbing of general responsiveness manifested as diminished interest in significant activities, estrangement from others, restricted range of affect, or sense of foreshortened future; and symptoms of autonomic arousal including hypervigilance, exaggerated startle response, sleep disturbance, impaired concentration, and irritability or outbursts of anger. A PTSD diagnosis requires that the symptoms are present for at least a month and that they cause clinically significant distress or impairment in social, occupational, or other important areas of functioning. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with PTSD for up to 28 weeks following 24 weeks of open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-III-R/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Social Anxiety Disorder – Sertraline hydrochloride tablets are indicated for the treatment of social anxiety disorder, also known as social phobia in adults. The efficacy of sertraline hydrochloride in the treatment of social anxiety disorder was established in two placebo-controlled trials of adult outpatients with a diagnosis of social anxiety disorder as defined by DSM-IV criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Social anxiety disorder, as defined by DSM-IV, is characterized by marked and persistent fear of social or performance situations involving exposure to unfamiliar people or possible scrutiny by others and by fears of acting in a humiliating or embarrassing way. Exposure to the feared social situation almost always provokes anxiety and feared social or performance situations are avoided or else are endured with intense anxiety or distress. In addition, patients recognize that the fear is excessive or unreasonable and the avoidance and anticipatory anxiety of the feared situation is associated with functional impairment or marked distress. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with social anxiety disorder for up to 24 weeks following 20 weeks of sertraline hydrochloride treatment was demonstrated in a placebo-controlled trial. Physicians who prescribe sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see Clinical Trials under CLINICAL PHARMACOLOGY).",
"Description": "Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The molecular formula C17H17NCl2HCl is represented by the following molecular structure. Sertraline hydrochloride is a white to off-white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50, 100, 150, and 200 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc, and titanium dioxide."
},
{
"NDCCode": "63545-168-03",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (63545-168-03) ",
"NDC11Code": "63545-0168-03",
"ProductNDC": "63545-168",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Arsenicum Album",
"NonProprietaryName": "Arsenicum Album",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210323",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "ARSENIC TRIOXIDE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2021-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210323",
"SamplePackage": "N"
},
{
"NDCCode": "65841-046-03",
"PackageDescription": "168 TABLET, FILM COATED in 1 BOTTLE (65841-046-03) ",
"NDC11Code": "65841-0046-03",
"ProductNDC": "65841-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ribavirin",
"NonProprietaryName": "Ribavirin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20051205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077094",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "RIBAVIRIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20051205",
"SamplePackage": "N"
},
{
"NDCCode": "65841-260-03",
"PackageDescription": "168 CAPSULE in 1 BOTTLE (65841-260-03) ",
"NDC11Code": "65841-0260-03",
"ProductNDC": "65841-260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ribavirin",
"NonProprietaryName": "Ribavirin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077224",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "RIBAVIRIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20060125",
"SamplePackage": "N"
},
{
"NDCCode": "68382-046-03",
"PackageDescription": "168 TABLET, FILM COATED in 1 BOTTLE (68382-046-03) ",
"NDC11Code": "68382-0046-03",
"ProductNDC": "68382-046",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ribavirin",
"NonProprietaryName": "Ribavirin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20051205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077094",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIBAVIRIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20051205",
"SamplePackage": "N",
"IndicationAndUsage": "Ribavirin is a nucleoside analogue indicated for the treatment of chronic hepatitis C (CHC) virus infection in combination with peginterferon alfa-2a in patients 5 years of age and older with compensated liver disease not previously treated with interferon alpha, and in adult CHC patients coinfected with HIV (1).",
"Description": "Ribavirin is a nucleoside analogue with antiviral activity. The chemical name of ribavirin is 1-β-D-ribofuranosyl-1H-1,2,4-triazole-3-carboxamide and has the following structural formula. The molecular formula of ribavirin is C8H12N4O5 and the molecular weight is 244.2. Ribavirin, USP is white, crystalline powder. It is freely soluble in water and slightly soluble in dehydrated alcohol. Each film-coated ribavirin tablet intended for oral administration contains 200 mg or 400 mg or 500 mg or 600 mg of ribavirin. In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, silicon dioxide, talc and titanium dioxide. Organic test number pending in the USP."
},
{
"NDCCode": "68382-260-03",
"PackageDescription": "168 CAPSULE in 1 BOTTLE (68382-260-03) ",
"NDC11Code": "68382-0260-03",
"ProductNDC": "68382-260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ribavirin",
"NonProprietaryName": "Ribavirin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077224",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIBAVIRIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20060125",
"SamplePackage": "N",
"IndicationAndUsage": "Ribavirin is a nucleoside analogue indicated in combination with interferon alfa- 2b (pegylated and nonpegylated) for the treatment of Chronic Hepatitis C (CHC) in patients 3 years of age or older with compensated liver disease. (1.1). Patients with the following characteristics are less likely to benefit from re-treatment after failing a course of therapy: previous nonresponse, previous pegylated interferon treatment, significant bridging fibrosis or cirrhosis, and genotype 1 infection.",
"Description": "Ribavirin is a synthetic nucleoside analogue (purine analogue). The chemical name of ribavirin is 1-β-D-ribofuranosyl-1H-1,2,4-triazole-3-carboxamide and has the following structural formula (see Figure 1). Figure 1: Structural Formula. Ribavirin, USP is a white, crystalline powder. It is freely soluble in water and slightly soluble in dehydrated alcohol. The molecular formula is C8H12N4O5 and the molecular weight is 244.21. Each ribavirin capsule, USP intended for oral administration contains 200 mg of ribavirin, USP in white, hard gelatin capsule shells. In addition, each capsule contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, and silicon dioxide. The capsule shell consists of gelatin and titanium dioxide. It may also contain sodium lauryl sulfate. The capsule is printed with black pharmaceutical ink."
},
{
"NDCCode": "70436-168-03",
"PackageDescription": "1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70436-168-03) ",
"NDC11Code": "70436-0168-03",
"ProductNDC": "70436-168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fenofibric Acid",
"NonProprietaryName": "Fenofibric Acid",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212562",
"LabelerName": "Slate Run Pharmaceuticals, LLC",
"SubstanceName": "FENOFIBRIC ACID",
"StrengthNumber": "45",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-11-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220411",
"SamplePackage": "N"
},
{
"NDCCode": "73377-168-03",
"PackageDescription": "480 g in 1 JAR (73377-168-03) ",
"NDC11Code": "73377-0168-03",
"ProductNDC": "73377-168",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cyclobenzaprine Hudrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20220520",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "AX Pharmaceutical Corp",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-10-29",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "23-APR-25"
},
{
"NDCCode": "76420-168-03",
"PackageDescription": "3 g in 1 JAR (76420-168-03)",
"NDC11Code": "76420-0168-03",
"ProductNDC": "76420-168",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150531",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20181231"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69339-168-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (69339-168-03) </PackageDescription>
<NDC11Code>69339-0168-03</NDC11Code>
<ProductNDC>69339-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gefitinib</ProprietaryName>
<NonProprietaryName>Gefitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230605</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212827</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>GEFITINIB</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gefitinib tablets are indicated for the first-line treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test [see Clinical Studies (14)]. Limitation of Use: Safety and efficacy of gefitinib tablets have not been established in patients with metastatic NSCLC whose tumors have EGFR mutations other than exon 19 deletions or exon 21 (L858R) substitution mutations [seeClinical Studies (14)].</IndicationAndUsage>
<Description>Gefitinib is a kinase inhibitor. The chemical name of gefitinib is N-(3ʹ-Chloro-4ʹ-fluorophenyl)-7-methoxy-6-{3-(4- morpholinyl)proproxy}-4-quinazolinamine and the following structural formula. Gefitinib has the molecular formula C22H24ClFN4O3, a relative molecular mass of 446.9 daltons and is a White to off-white crystalline powder. Gefitinib is a free base. The molecule has pKa1 is 6.5 & pKa2 is 6.9. Gefitinib can be defined as soluble at pH 1, but insoluble above pH 7, freely soluble in dimethylformamide and acetic acid, slightly soluble in methanol. Gefitinib tablets are available as brown film-coated tablets, containing 250 mg of gefitinib, for oral administration. The inactive ingredients of the tablet core of gefitinib tablets are lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, povidone, and sodium lauryl sulfate and magnesium stearate. Tablet coating contains: polyvinyl alcohol, polyethylene glycol/PEG, talc, titanium dioxide, yellow iron oxide and red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>69339-136-34</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (69339-136-34) / 2 mL in 1 SYRINGE, GLASS (69339-136-03) </PackageDescription>
<NDC11Code>69339-0136-34</NDC11Code>
<ProductNDC>69339-136</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210363</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. As an adjunct prior to endoscopic procedures if apprehension, anxiety or acute stress reactions are present, and to diminish the patient's recall of the procedures (See WARNINGS). Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; stiff-man syndrome; and tetanus. Diazepam injection is a useful adjunct in status epilepticus. Diazepam is a useful premedication (the intramuscular route is preferred) for relief of anxiety and tension in patients who are to undergo surgical procedures. Intravenously, prior to cardioversion for the relief of anxiety and tension and to diminish the patient's recall of the procedure.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5- phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless crystalline compound, insoluble in water, with a molecular weight of 284.74 and with the following molecular structure. M.W. 284.74Diazepam Injection, USP is a sterile solution and each mL contains 5 mg diazepam compounded with 40% propylene glycol, 10% alcohol, 5% sodium benzoate and benzoic acid as buffers, and 1.5% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>69339-169-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-169-03) </PackageDescription>
<NDC11Code>69339-0169-03</NDC11Code>
<ProductNDC>69339-169</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209555</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is sparingly soluble in acetone, slightly soluble in polyethylene glycol and ethanol, very slightly soluble in isopropanol and practically insoluble in water.Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The film coating for the 14 mg tablet is made of FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, polyethylene glycol, talc and titanium dioxide. In addition to these, the 7 mg tablet film coating includes iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>69339-170-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-170-03) </PackageDescription>
<NDC11Code>69339-0170-03</NDC11Code>
<ProductNDC>69339-170</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209555</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablets are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to almost white powder that is sparingly soluble in acetone, slightly soluble in polyethylene glycol and ethanol, very slightly soluble in isopropanol and practically insoluble in water.Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablets contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The film coating for the 14 mg tablet is made of FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, polyethylene glycol, talc and titanium dioxide. In addition to these, the 7 mg tablet film coating includes iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>69339-171-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-171-03) </PackageDescription>
<NDC11Code>69339-0171-03</NDC11Code>
<ProductNDC>69339-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221024</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077851</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.5. Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 4 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, triacetin, and iron oxide yellow (8 mg tablet only). This product meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>69339-172-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-172-03) </PackageDescription>
<NDC11Code>69339-0172-03</NDC11Code>
<ProductNDC>69339-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221024</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077851</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.5. Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 4 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, triacetin, and iron oxide yellow (8 mg tablet only). This product meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>69339-177-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-177-03) </PackageDescription>
<NDC11Code>69339-0177-03</NDC11Code>
<ProductNDC>69339-177</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Armodafinil</ProprietaryName>
<NonProprietaryName>Armodafinil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202768</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>ARMODAFINIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.</IndicationAndUsage>
<Description>Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>69339-178-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-178-03) </PackageDescription>
<NDC11Code>69339-0178-03</NDC11Code>
<ProductNDC>69339-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Armodafinil</ProprietaryName>
<NonProprietaryName>Armodafinil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202768</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>ARMODAFINIL</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.</IndicationAndUsage>
<Description>Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>69339-179-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-179-03) </PackageDescription>
<NDC11Code>69339-0179-03</NDC11Code>
<ProductNDC>69339-179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Armodafinil</ProprietaryName>
<NonProprietaryName>Armodafinil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202768</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>ARMODAFINIL</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.</IndicationAndUsage>
<Description>Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>69339-180-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (69339-180-03) </PackageDescription>
<NDC11Code>69339-0180-03</NDC11Code>
<ProductNDC>69339-180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Armodafinil</ProprietaryName>
<NonProprietaryName>Armodafinil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202768</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>ARMODAFINIL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Armodafinil tablets are indicated to improve wakefulness in adult patients with excessive sleepiness associated with obstructive sleep apnea (OSA), narcolepsy, or shift work disorder (SWD).Limitations of Use In OSA, armodafinil tablets are indicated to treat excessive sleepiness and not as treatment for the underlying obstruction. If continuous positive airway pressure (CPAP) is the treatment of choice for a patient, a maximal effort to treat with CPAP for an adequate period of time should be made prior to initiating armodafinil tablets for excessive sleepiness.</IndicationAndUsage>
<Description>Armodafinil is a wakefulness-promoting agent for oral administration. Armodafinil is the R-enantiomer of modafinil which is a 1:1 mixture of the R- and S-enantiomers. The chemical name for armodafinil is 2-[(R)-(diphenylmethyl)sulfinyl] acetamide. The molecular formula is C15H15NO2S and the molecular weight is 273.35.The chemical structure is. Armodafinil is a white to off-white, crystalline powder that is freely soluble in dimethyl formamide, soluble in methanol, insoluble in water.Armodafinil tablets contain 50,150,200 and 250 mg of armodafinil and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate, povidone and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>69339-181-03</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-181-03) </PackageDescription>
<NDC11Code>69339-0181-03</NDC11Code>
<ProductNDC>69339-181</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091537</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>69339-182-03</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-182-03) </PackageDescription>
<NDC11Code>69339-0182-03</NDC11Code>
<ProductNDC>69339-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091537</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>69339-183-03</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-183-03) </PackageDescription>
<NDC11Code>69339-0183-03</NDC11Code>
<ProductNDC>69339-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091537</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>69339-184-03</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-184-03) </PackageDescription>
<NDC11Code>69339-0184-03</NDC11Code>
<ProductNDC>69339-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091537</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>69339-185-03</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-185-03) </PackageDescription>
<NDC11Code>69339-0185-03</NDC11Code>
<ProductNDC>69339-185</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091537</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>69339-186-03</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (69339-186-03) </PackageDescription>
<NDC11Code>69339-0186-03</NDC11Code>
<ProductNDC>69339-186</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091537</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone orally disintegrating tablets are an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone orally disintegrating tablets, USP contain risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-α]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.48. The structural formula is. Risperidone, USP is a white or almost white powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl.Risperidone orally disintegrating tablets are available in 0.25 mg (white), 0.5 mg (white), 1 mg (white), 2 mg (peach), 3 mg (green), and 4 mg (blue) strengths. Risperidone orally disintegrating tablets contain the following inactive ingredients: amino methacrylate copolymer, aspartame, crospovidone, magnesium stearate, mannitol, lactose monohydrate, peppermint flavor, silicon dioxide, sodium lauryl sulfate, sodium stearyl fumarate, sorbitol and stearic acid. The 2 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and the 3 mg and 4 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>69339-236-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (69339-236-03) </PackageDescription>
<NDC11Code>69339-0236-03</NDC11Code>
<ProductNDC>69339-236</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bisoprolol Fumarate</ProprietaryName>
<NonProprietaryName>Bisoprolol Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075831</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>BISOPROLOL FUMARATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bisoprolol fumarate is indicated in the management of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>BISOPROLOL FUMARATE USP is a synthetic, beta1-selective (cardioselective) adrenoceptor blocking agent. The chemical name for bisoprolol fumarate is (±)-1-[4-[[2- (1-Methylethoxy)ethoxy]methyl]phenoxy]-3-[(1-methylethyl)amino]-2-propanol (E)-2- butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta- blocking activity. Its molecular formula is (C18H31NO4)2C4H4O4 and its structure is. Bisoprolol fumarate has a molecular weight of 766.97. It is a white crystalline powder which is approximately equally hydrophilic and lipophilic, and is readily soluble in water, methanol, ethanol, and chloroform. Bisoprolol fumarate tablets USP are available as 5 and 10 mg tablets for oral administration. Inactive ingredients include Colloidal Silicon Dioxide, Corn Starch (Pregelatinized), Crospovidone, Dibasic Calcium Phosphate, Hypromelloses, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polysorbate 80 and Titanium Dioxide. The 5 mg tablets also contain Red and Yellow Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>69339-237-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (69339-237-03) </PackageDescription>
<NDC11Code>69339-0237-03</NDC11Code>
<ProductNDC>69339-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bisoprolol Fumarate</ProprietaryName>
<NonProprietaryName>Bisoprolol Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075831</ApplicationNumber>
<LabelerName>Natco Pharma USA LLC</LabelerName>
<SubstanceName>BISOPROLOL FUMARATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bisoprolol fumarate is indicated in the management of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>BISOPROLOL FUMARATE USP is a synthetic, beta1-selective (cardioselective) adrenoceptor blocking agent. The chemical name for bisoprolol fumarate is (±)-1-[4-[[2- (1-Methylethoxy)ethoxy]methyl]phenoxy]-3-[(1-methylethyl)amino]-2-propanol (E)-2- butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta- blocking activity. Its molecular formula is (C18H31NO4)2C4H4O4 and its structure is. Bisoprolol fumarate has a molecular weight of 766.97. It is a white crystalline powder which is approximately equally hydrophilic and lipophilic, and is readily soluble in water, methanol, ethanol, and chloroform. Bisoprolol fumarate tablets USP are available as 5 and 10 mg tablets for oral administration. Inactive ingredients include Colloidal Silicon Dioxide, Corn Starch (Pregelatinized), Crospovidone, Dibasic Calcium Phosphate, Hypromelloses, Magnesium Stearate, Microcrystalline Cellulose, Polyethylene Glycol, Polysorbate 80 and Titanium Dioxide. The 5 mg tablets also contain Red and Yellow Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>10825-002-03</NDCCode>
<PackageDescription>168 L in 1 DEWAR (10825-002-03)</PackageDescription>
<NDC11Code>10825-0002-03</NDC11Code>
<ProductNDC>10825-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19740101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>Northern Welding Supply</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11534-168-03</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (11534-168-03)</PackageDescription>
<NDC11Code>11534-0168-03</NDC11Code>
<ProductNDC>11534-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204713</ApplicationNumber>
<LabelerName>SUNRISE PHARMACEUTICAL, INC</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Antihistamine [EPC],Cholinergic Antagonists [MoA],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-12-07</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55289-168-03</NDCCode>
<PackageDescription>3 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55289-168-03) </PackageDescription>
<NDC11Code>55289-0168-03</NDC11Code>
<ProductNDC>55289-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famciclovir</ProprietaryName>
<NonProprietaryName>Famciclovir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077487</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FAMCICLOVIR</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110414</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famciclovir tablets, a prodrug of penciclovir, are a deoxynucleoside analog DNA polymerase inhibitor indicated for. Immunocompetent Adult Patients( 1.1) : 1 Herpes labialis (cold sores) Treatment of recurrent episodes, 2 Genital herpes Treatment of recurrent episodesSuppressive therapy of recurrent episodes, 3 Herpes zoster (shingles).</IndicationAndUsage>
<Description>Famciclovir Tablets, USP contain famciclovir, USP, an orally administered prodrug of the antiviral agent penciclovir. Chemically, famciclovir, USP is known as 2-[2-(2-amino-9 H-purin-9-yl)ethyl]-1,3-propanediol diacetate. It is a synthetic acyclic guanine derivative and has the following structure:. C 14H 19N 5O 4M.W. 321.3. Famciclovir, USP is a white to pale yellow solid. It is freely soluble in acetone and methanol, and sparingly soluble in ethanol and isopropanol. At 25°C famciclovir, USP is freely soluble (greater than 25% w/v) in water initially, but rapidly precipitates as the sparingly soluble (2% to 3% w/v) monohydrate. Famciclovir, USP is not hygroscopic below 85% relative humidity. Partition coefficients are: octanol/water (pH 4.8) P= 1.09 and octanol/phosphate buffer (pH 7.4) P= 2.08. Each white, film-coated tablet contains famciclovir, USP. The 125 mg and 250 mg tablets are round; the 500 mg tablets are capsule-shaped. Inactive ingredients consist of croscarmellose sodium, hydroxypropyl cellulose, hypromellose, polydextrose, polyethylene glycol, silicified microcrystalline cellulose, sodium starch glycolate, sodium stearyl fumarate, titanium dioxide, and triacetin. Product meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>63304-168-03</NDCCode>
<PackageDescription>10 TABLET, COATED in 1 BOTTLE (63304-168-03)</PackageDescription>
<NDC11Code>63304-0168-03</NDC11Code>
<ProductNDC>63304-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077977</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Major Depressive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-Compulsive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive-compulsive disorder (OCD), as defined in the DSM-III-R; i.e., the obsessions or compulsions cause marked distress, are time-consuming, or significantly interfere with social or occupational functioning. The efficacy of sertraline hydrochloride was established in 12-week trials with obsessive-compulsive outpatients having diagnoses of obsessive-compulsive disorder as defined according to DSM-III or DSM-III-R criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-compulsive disorder is characterized by recurrent and persistent ideas, thoughts, impulses, or images (obsessions) that are ego-dystonic and/or repetitive, purposeful, and intentional behaviors (compulsions) that are recognized by the person as excessive or unreasonable. The efficacy of sertraline hydrochloride in maintaining a response, in patients with OCD who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Panic Disorder–Sertraline hydrochloride is indicated for the treatment of panic disorder in adults, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of sertraline hydrochloride was established in three 10 to 12 week trials in adult panic disorder patients whose diagnoses corresponded to the DSM-III-R category of panic disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, i.e., a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The efficacy of sertraline hydrochloride in maintaining a response, in adult patients with panic disorder who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Posttraumatic Stress Disorder (PTSD)–Sertraline hydrochloride is indicated for the treatment of posttraumatic stress disorder in adults. The efficacy of sertraline hydrochloride in the treatment of PTSD was established in two 12-week placebo-controlled trials of adult outpatients whose diagnosis met criteria for the DSM-III-R category of PTSD (see Clinical Trials under CLINICAL PHARMACOLOGY). PTSD, as defined by DSM-III-R/IV, requires exposure to a traumatic event that involved actual or threatened death or serious injury, or threat to the physical integrity of self or others, and a response which involves intense fear, helplessness, or horror. Symptoms that occur as a result of exposure to the traumatic event include reexperiencing of the event in the form of intrusive thoughts, flashbacks or dreams, and intense psychological distress and physiological reactivity on exposure to cues to the event; avoidance of situations reminiscent of the traumatic event, inability to recall details of the event, and/or numbing of general responsiveness manifested as diminished interest in significant activities, estrangement from others, restricted range of affect, or sense of foreshortened future; and symptoms of autonomic arousal including hypervigilance, exaggerated startle response, sleep disturbance, impaired concentration, and irritability or outbursts of anger. A PTSD diagnosis requires that the symptoms are present for at least a month and that they cause clinically significant distress or impairment in social, occupational, or other important areas of functioning. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with PTSD for up to 28 weeks following 24 weeks of open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-III-R/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Social Anxiety Disorder – Sertraline hydrochloride tablets are indicated for the treatment of social anxiety disorder, also known as social phobia in adults. The efficacy of sertraline hydrochloride in the treatment of social anxiety disorder was established in two placebo-controlled trials of adult outpatients with a diagnosis of social anxiety disorder as defined by DSM-IV criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Social anxiety disorder, as defined by DSM-IV, is characterized by marked and persistent fear of social or performance situations involving exposure to unfamiliar people or possible scrutiny by others and by fears of acting in a humiliating or embarrassing way. Exposure to the feared social situation almost always provokes anxiety and feared social or performance situations are avoided or else are endured with intense anxiety or distress. In addition, patients recognize that the fear is excessive or unreasonable and the avoidance and anticipatory anxiety of the feared situation is associated with functional impairment or marked distress. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with social anxiety disorder for up to 24 weeks following 20 weeks of sertraline hydrochloride treatment was demonstrated in a placebo-controlled trial. Physicians who prescribe sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see Clinical Trials under CLINICAL PHARMACOLOGY).</IndicationAndUsage>
<Description>Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The molecular formula C17H17NCl2HCl is represented by the following molecular structure. Sertraline hydrochloride is a white to off-white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50, 100, 150, and 200 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63545-168-03</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (63545-168-03) </PackageDescription>
<NDC11Code>63545-0168-03</NDC11Code>
<ProductNDC>63545-168</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Arsenicum Album</ProprietaryName>
<NonProprietaryName>Arsenicum Album</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210323</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>ARSENIC TRIOXIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-046-03</NDCCode>
<PackageDescription>168 TABLET, FILM COATED in 1 BOTTLE (65841-046-03) </PackageDescription>
<NDC11Code>65841-0046-03</NDC11Code>
<ProductNDC>65841-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ribavirin</ProprietaryName>
<NonProprietaryName>Ribavirin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077094</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>RIBAVIRIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-260-03</NDCCode>
<PackageDescription>168 CAPSULE in 1 BOTTLE (65841-260-03) </PackageDescription>
<NDC11Code>65841-0260-03</NDC11Code>
<ProductNDC>65841-260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ribavirin</ProprietaryName>
<NonProprietaryName>Ribavirin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077224</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>RIBAVIRIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68382-046-03</NDCCode>
<PackageDescription>168 TABLET, FILM COATED in 1 BOTTLE (68382-046-03) </PackageDescription>
<NDC11Code>68382-0046-03</NDC11Code>
<ProductNDC>68382-046</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ribavirin</ProprietaryName>
<NonProprietaryName>Ribavirin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077094</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIBAVIRIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ribavirin is a nucleoside analogue indicated for the treatment of chronic hepatitis C (CHC) virus infection in combination with peginterferon alfa-2a in patients 5 years of age and older with compensated liver disease not previously treated with interferon alpha, and in adult CHC patients coinfected with HIV (1).</IndicationAndUsage>
<Description>Ribavirin is a nucleoside analogue with antiviral activity. The chemical name of ribavirin is 1-β-D-ribofuranosyl-1H-1,2,4-triazole-3-carboxamide and has the following structural formula. The molecular formula of ribavirin is C8H12N4O5 and the molecular weight is 244.2. Ribavirin, USP is white, crystalline powder. It is freely soluble in water and slightly soluble in dehydrated alcohol. Each film-coated ribavirin tablet intended for oral administration contains 200 mg or 400 mg or 500 mg or 600 mg of ribavirin. In addition, each tablet contains the following inactive ingredients: crospovidone, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, silicon dioxide, talc and titanium dioxide. Organic test number pending in the USP.</Description>
</NDC>
<NDC>
<NDCCode>68382-260-03</NDCCode>
<PackageDescription>168 CAPSULE in 1 BOTTLE (68382-260-03) </PackageDescription>
<NDC11Code>68382-0260-03</NDC11Code>
<ProductNDC>68382-260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ribavirin</ProprietaryName>
<NonProprietaryName>Ribavirin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077224</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIBAVIRIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ribavirin is a nucleoside analogue indicated in combination with interferon alfa- 2b (pegylated and nonpegylated) for the treatment of Chronic Hepatitis C (CHC) in patients 3 years of age or older with compensated liver disease. (1.1). Patients with the following characteristics are less likely to benefit from re-treatment after failing a course of therapy: previous nonresponse, previous pegylated interferon treatment, significant bridging fibrosis or cirrhosis, and genotype 1 infection.</IndicationAndUsage>
<Description>Ribavirin is a synthetic nucleoside analogue (purine analogue). The chemical name of ribavirin is 1-β-D-ribofuranosyl-1H-1,2,4-triazole-3-carboxamide and has the following structural formula (see Figure 1). Figure 1: Structural Formula. Ribavirin, USP is a white, crystalline powder. It is freely soluble in water and slightly soluble in dehydrated alcohol. The molecular formula is C8H12N4O5 and the molecular weight is 244.21. Each ribavirin capsule, USP intended for oral administration contains 200 mg of ribavirin, USP in white, hard gelatin capsule shells. In addition, each capsule contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, and silicon dioxide. The capsule shell consists of gelatin and titanium dioxide. It may also contain sodium lauryl sulfate. The capsule is printed with black pharmaceutical ink.</Description>
</NDC>
<NDC>
<NDCCode>70436-168-03</NDCCode>
<PackageDescription>1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70436-168-03) </PackageDescription>
<NDC11Code>70436-0168-03</NDC11Code>
<ProductNDC>70436-168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fenofibric Acid</ProprietaryName>
<NonProprietaryName>Fenofibric Acid</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212562</ApplicationNumber>
<LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
<SubstanceName>FENOFIBRIC ACID</SubstanceName>
<StrengthNumber>45</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>73377-168-03</NDCCode>
<PackageDescription>480 g in 1 JAR (73377-168-03) </PackageDescription>
<NDC11Code>73377-0168-03</NDC11Code>
<ProductNDC>73377-168</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cyclobenzaprine Hudrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20220520</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>AX Pharmaceutical Corp</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-10-29</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>23-APR-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>76420-168-03</NDCCode>
<PackageDescription>3 g in 1 JAR (76420-168-03)</PackageDescription>
<NDC11Code>76420-0168-03</NDC11Code>
<ProductNDC>76420-168</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150531</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
</NDCList>