{
"NDC": [
{
"NDCCode": "69452-172-74",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (69452-172-74) / 3 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "69452-0172-74",
"ProductNDC": "69452-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210001",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191010",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].",
"Description": "Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "69452-172-13",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (69452-172-13) ",
"NDC11Code": "69452-0172-13",
"ProductNDC": "69452-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210001",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190312",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].",
"Description": "Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "69452-172-72",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (69452-172-72) / 3 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "69452-0172-72",
"ProductNDC": "69452-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210001",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191010",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].",
"Description": "Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "69452-172-99",
"PackageDescription": "6150 TABLET, FILM COATED in 1 DRUM (69452-172-99) ",
"NDC11Code": "69452-0172-99",
"ProductNDC": "69452-172",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"StartMarketingDate": "20220817",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2022-08-19",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "17-AUG-22"
},
{
"NDCCode": "69452-156-73",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (69452-156-73) > 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (69452-156-74) ",
"NDC11Code": "69452-0156-73",
"ProductNDC": "69452-156",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204722",
"LabelerName": "Bionpharma Inc.,",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2021-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170117",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan Benzoate Orally Disintegrating Tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use: 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, USP, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets, USP are administered to treat any subsequent attacks., 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)] . , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks., 4 Safety and effectiveness of Rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.",
"Description": "Rizatriptan Benzoate Orally Disintegrating Tablet contains rizatriptan benzoate, a selective 5-hydroxytryptamine (5- 1B/1D HT ) receptor agonist. Rizatriptan benzoate is described 1B/1D chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. Its empirical formula is C 15H 19N 5C 7H 6O 2, representing a molecular weight of the free base of 269.4. Rizatriptan Benzoate is a white to off-white crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan Benzoate Orally Disintegrating Tablets are available for oral administration in strengths of 5 and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hydroxypropyl cellulose, colloidal silicon dioxide, xylitol, anhydrous dibasic calcium phosphate, crospovidone, mannitol, sodium stearyl fumarate, aspartame, isopropyl alcohol and menthol."
},
{
"NDCCode": "69452-157-73",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (69452-157-73) > 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (69452-157-74) ",
"NDC11Code": "69452-0157-73",
"ProductNDC": "69452-157",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204722",
"LabelerName": "Bionpharma Inc.,",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2021-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170117",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan Benzoate Orally Disintegrating Tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use: 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, USP, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets, USP are administered to treat any subsequent attacks., 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)] . , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks., 4 Safety and effectiveness of Rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.",
"Description": "Rizatriptan Benzoate Orally Disintegrating Tablet contains rizatriptan benzoate, a selective 5-hydroxytryptamine (5- 1B/1D HT ) receptor agonist. Rizatriptan benzoate is described 1B/1D chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. Its empirical formula is C 15H 19N 5C 7H 6O 2, representing a molecular weight of the free base of 269.4. Rizatriptan Benzoate is a white to off-white crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan Benzoate Orally Disintegrating Tablets are available for oral administration in strengths of 5 and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hydroxypropyl cellulose, colloidal silicon dioxide, xylitol, anhydrous dibasic calcium phosphate, crospovidone, mannitol, sodium stearyl fumarate, aspartame, isopropyl alcohol and menthol."
},
{
"NDCCode": "69452-375-96",
"PackageDescription": "1 CONTAINER in 1 CARTON (69452-375-96) / 74 mL in 1 CONTAINER",
"NDC11Code": "69452-0375-96",
"ProductNDC": "69452-375",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cool And Heat Pain Relieving Liquid",
"NonProprietaryName": "Menthol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20221101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "MENTHOL",
"StrengthNumber": "16",
"StrengthUnit": "mg/100mL",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221101",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily relieves minor muscle and joint pain associated with: 1 arthritis, 2 simple backache, 3 muscle strains, 4 sprains, 5 bruises."
},
{
"NDCCode": "69452-378-74",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (69452-378-74) / 3 TABLET in 1 BLISTER PACK",
"NDC11Code": "69452-0378-74",
"ProductNDC": "69452-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibandronate Sodium",
"NonProprietaryName": "Ibandronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078998",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "IBANDRONATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230526",
"SamplePackage": "N",
"Description": "Ibandronate sodium is a nitrogen-containing bisphosphonate that inhibits osteoclast-mediated bone resorption. The chemical name for ibandronate sodium is 3-(N-methyl-N-pentyl) amino-1-hydroxypropane-1,1-diphosphonic acid, monosodium salt, monohydrate with the molecular formula C9H22NO7P2Na·H2O and a molecular weight of 359.24. Ibandronate sodium is a white- to off-white powder. It is freely soluble in water and practically insoluble in organic solvents. Ibandronate sodium has the following structural formula. Ibandronate sodium is available as a yellow colored capsule shaped 150 mg film-coated tablet for once-monthly oral administration. One 150 mg film-coated tablet contains 168.75 mg ibandronate monosodium monohydrate, equivalent to 150 mg free acid. Ibandronate sodium tablet also contains the following inactive ingredients: lactose monohydrate, povidone, crospovidone, microcrystalline cellulose, colloidal silicon dioxide, and sodium stearyl fumarate. The tablet film coating contains hypromellose, titanium dioxide, polyethylene glycol, and iron oxide yellow."
},
{
"NDCCode": "69452-393-63",
"PackageDescription": "1 BOTTLE, WITH APPLICATOR in 1 CARTON (69452-393-63) / 74 mL in 1 BOTTLE, WITH APPLICATOR",
"NDC11Code": "69452-0393-63",
"ProductNDC": "69452-393",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pain Relief Roll-on",
"NonProprietaryName": "Lidocaine 4%",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230220",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230220",
"SamplePackage": "N",
"IndicationAndUsage": "For temporarily relief of pain and itching."
},
{
"NDCCode": "12634-537-00",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-00)",
"NDC11Code": "12634-0537-00",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-01)",
"NDC11Code": "12634-0537-01",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-55",
"PackageDescription": "15 TABLET, FILM COATED in 1 BLISTER PACK (12634-537-55)",
"NDC11Code": "12634-0537-55",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-60)",
"NDC11Code": "12634-0537-60",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-69",
"PackageDescription": "9 TABLET, FILM COATED in 1 BLISTER PACK (12634-537-69)",
"NDC11Code": "12634-0537-69",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-71",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-71)",
"NDC11Code": "12634-0537-71",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-80",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-80)",
"NDC11Code": "12634-0537-80",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-82",
"PackageDescription": "12 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-82)",
"NDC11Code": "12634-0537-82",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-85",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-85)",
"NDC11Code": "12634-0537-85",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-91",
"PackageDescription": "1 TABLET, FILM COATED in 1 BLISTER PACK (12634-537-91)",
"NDC11Code": "12634-0537-91",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-537-98",
"PackageDescription": "8 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-98)",
"NDC11Code": "12634-0537-98",
"ProductNDC": "12634-537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Apotheca, Inc.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone."
},
{
"NDCCode": "12634-547-74",
"PackageDescription": "24 CAPSULE in 1 BOTTLE (12634-547-74)",
"NDC11Code": "12634-0547-74",
"ProductNDC": "12634-547",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20031023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040525",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Phentermine hydrochloride capsules are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m 2, or ≥ 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches × 0.0254 = meters. The limited usefulness of agents of this class, including phentermine, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder, which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP, an anorectic agent for oral administration, is available as an oral capsule containing 30 mg of phentermine hydrochloride (equivalent to 24 mg of phentermine base). Each phentermine hydrochloride capsule also contains the following inactive ingredients: crospovidone, dibasic calcium phosphate dihydrate, FDA/E 172 Yellow Iron Oxide, gelatin, magnesium stearate, povidone, and titanium dioxide. The imprinting ink contains D&C Yellow #10 Lake, FD&C Blue #1, FD&C Blue #2, and FD&C Red #40."
},
{
"NDCCode": "21695-280-08",
"PackageDescription": "8 TABLET, FILM COATED in 1 BOTTLE (21695-280-08)",
"NDC11Code": "21695-0280-08",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-12",
"PackageDescription": "12 TABLET, FILM COATED in 1 BOTTLE (21695-280-12)",
"NDC11Code": "21695-0280-12",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-15",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (21695-280-15)",
"NDC11Code": "21695-0280-15",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-16",
"PackageDescription": "16 TABLET, FILM COATED in 1 BOTTLE (21695-280-16)",
"NDC11Code": "21695-0280-16",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (21695-280-20)",
"NDC11Code": "21695-0280-20",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-28",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (21695-280-28)",
"NDC11Code": "21695-0280-28",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (21695-280-30)",
"NDC11Code": "21695-0280-30",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (21695-280-60)",
"NDC11Code": "21695-0280-60",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "21695-280-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (21695-280-90)",
"NDC11Code": "21695-0280-90",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69452-172-74</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (69452-172-74) / 3 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69452-0172-74</NDC11Code>
<ProductNDC>69452-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210001</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].</IndicationAndUsage>
<Description>Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69452-172-13</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (69452-172-13) </PackageDescription>
<NDC11Code>69452-0172-13</NDC11Code>
<ProductNDC>69452-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210001</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].</IndicationAndUsage>
<Description>Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69452-172-72</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (69452-172-72) / 3 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69452-0172-72</NDC11Code>
<ProductNDC>69452-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210001</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].</IndicationAndUsage>
<Description>Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69452-172-99</NDCCode>
<PackageDescription>6150 TABLET, FILM COATED in 1 DRUM (69452-172-99) </PackageDescription>
<NDC11Code>69452-0172-99</NDC11Code>
<ProductNDC>69452-172</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<StartMarketingDate>20220817</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2022-08-19</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>17-AUG-22</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>69452-156-73</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (69452-156-73) > 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (69452-156-74) </PackageDescription>
<NDC11Code>69452-0156-73</NDC11Code>
<ProductNDC>69452-156</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204722</ApplicationNumber>
<LabelerName>Bionpharma Inc.,</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan Benzoate Orally Disintegrating Tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use: 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, USP, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets, USP are administered to treat any subsequent attacks., 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)] . , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks., 4 Safety and effectiveness of Rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan Benzoate Orally Disintegrating Tablet contains rizatriptan benzoate, a selective 5-hydroxytryptamine (5- 1B/1D HT ) receptor agonist. Rizatriptan benzoate is described 1B/1D chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. Its empirical formula is C 15H 19N 5C 7H 6O 2, representing a molecular weight of the free base of 269.4. Rizatriptan Benzoate is a white to off-white crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan Benzoate Orally Disintegrating Tablets are available for oral administration in strengths of 5 and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hydroxypropyl cellulose, colloidal silicon dioxide, xylitol, anhydrous dibasic calcium phosphate, crospovidone, mannitol, sodium stearyl fumarate, aspartame, isopropyl alcohol and menthol.</Description>
</NDC>
<NDC>
<NDCCode>69452-157-73</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (69452-157-73) > 3 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (69452-157-74) </PackageDescription>
<NDC11Code>69452-0157-73</NDC11Code>
<ProductNDC>69452-157</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204722</ApplicationNumber>
<LabelerName>Bionpharma Inc.,</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan Benzoate Orally Disintegrating Tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use: 1 Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, USP, the diagnosis of migraine should be reconsidered before rizatriptan benzoate orally disintegrating tablets, USP are administered to treat any subsequent attacks., 2 Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)] . , 3 Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks., 4 Safety and effectiveness of Rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan Benzoate Orally Disintegrating Tablet contains rizatriptan benzoate, a selective 5-hydroxytryptamine (5- 1B/1D HT ) receptor agonist. Rizatriptan benzoate is described 1B/1D chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. Its empirical formula is C 15H 19N 5C 7H 6O 2, representing a molecular weight of the free base of 269.4. Rizatriptan Benzoate is a white to off-white crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan Benzoate Orally Disintegrating Tablets are available for oral administration in strengths of 5 and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hydroxypropyl cellulose, colloidal silicon dioxide, xylitol, anhydrous dibasic calcium phosphate, crospovidone, mannitol, sodium stearyl fumarate, aspartame, isopropyl alcohol and menthol.</Description>
</NDC>
<NDC>
<NDCCode>69452-375-96</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (69452-375-96) / 74 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>69452-0375-96</NDC11Code>
<ProductNDC>69452-375</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cool And Heat Pain Relieving Liquid</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20221101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>16</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily relieves minor muscle and joint pain associated with: 1 arthritis, 2 simple backache, 3 muscle strains, 4 sprains, 5 bruises.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69452-378-74</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (69452-378-74) / 3 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>69452-0378-74</NDC11Code>
<ProductNDC>69452-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibandronate Sodium</ProprietaryName>
<NonProprietaryName>Ibandronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078998</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>IBANDRONATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230526</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Ibandronate sodium is a nitrogen-containing bisphosphonate that inhibits osteoclast-mediated bone resorption. The chemical name for ibandronate sodium is 3-(N-methyl-N-pentyl) amino-1-hydroxypropane-1,1-diphosphonic acid, monosodium salt, monohydrate with the molecular formula C9H22NO7P2Na·H2O and a molecular weight of 359.24. Ibandronate sodium is a white- to off-white powder. It is freely soluble in water and practically insoluble in organic solvents. Ibandronate sodium has the following structural formula. Ibandronate sodium is available as a yellow colored capsule shaped 150 mg film-coated tablet for once-monthly oral administration. One 150 mg film-coated tablet contains 168.75 mg ibandronate monosodium monohydrate, equivalent to 150 mg free acid. Ibandronate sodium tablet also contains the following inactive ingredients: lactose monohydrate, povidone, crospovidone, microcrystalline cellulose, colloidal silicon dioxide, and sodium stearyl fumarate. The tablet film coating contains hypromellose, titanium dioxide, polyethylene glycol, and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>69452-393-63</NDCCode>
<PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (69452-393-63) / 74 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
<NDC11Code>69452-0393-63</NDC11Code>
<ProductNDC>69452-393</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pain Relief Roll-on</ProprietaryName>
<NonProprietaryName>Lidocaine 4%</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230220</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For temporarily relief of pain and itching.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>12634-537-00</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-00)</PackageDescription>
<NDC11Code>12634-0537-00</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-01)</PackageDescription>
<NDC11Code>12634-0537-01</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-55</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BLISTER PACK (12634-537-55)</PackageDescription>
<NDC11Code>12634-0537-55</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-60)</PackageDescription>
<NDC11Code>12634-0537-60</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-69</NDCCode>
<PackageDescription>9 TABLET, FILM COATED in 1 BLISTER PACK (12634-537-69)</PackageDescription>
<NDC11Code>12634-0537-69</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-71</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-71)</PackageDescription>
<NDC11Code>12634-0537-71</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-80</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-80)</PackageDescription>
<NDC11Code>12634-0537-80</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-82</NDCCode>
<PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-82)</PackageDescription>
<NDC11Code>12634-0537-82</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-85</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-85)</PackageDescription>
<NDC11Code>12634-0537-85</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-91</NDCCode>
<PackageDescription>1 TABLET, FILM COATED in 1 BLISTER PACK (12634-537-91)</PackageDescription>
<NDC11Code>12634-0537-91</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-537-98</NDCCode>
<PackageDescription>8 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (12634-537-98)</PackageDescription>
<NDC11Code>12634-0537-98</NDC11Code>
<ProductNDC>12634-537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Apotheca, Inc.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients. colloidal silicon dioxide,D and C red No 27 aluminum lake, D and C yellow No 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate,microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>12634-547-74</NDCCode>
<PackageDescription>24 CAPSULE in 1 BOTTLE (12634-547-74)</PackageDescription>
<NDC11Code>12634-0547-74</NDC11Code>
<ProductNDC>12634-547</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20031023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040525</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE],Increased Sympathetic Activity [PE],Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Phentermine hydrochloride capsules are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m 2, or ≥ 27 kg/m 2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches × 0.0254 = meters. The limited usefulness of agents of this class, including phentermine, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder, which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP, an anorectic agent for oral administration, is available as an oral capsule containing 30 mg of phentermine hydrochloride (equivalent to 24 mg of phentermine base). Each phentermine hydrochloride capsule also contains the following inactive ingredients: crospovidone, dibasic calcium phosphate dihydrate, FDA/E 172 Yellow Iron Oxide, gelatin, magnesium stearate, povidone, and titanium dioxide. The imprinting ink contains D&C Yellow #10 Lake, FD&C Blue #1, FD&C Blue #2, and FD&C Red #40.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-08</NDCCode>
<PackageDescription>8 TABLET, FILM COATED in 1 BOTTLE (21695-280-08)</PackageDescription>
<NDC11Code>21695-0280-08</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-12</NDCCode>
<PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE (21695-280-12)</PackageDescription>
<NDC11Code>21695-0280-12</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-15</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (21695-280-15)</PackageDescription>
<NDC11Code>21695-0280-15</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-16</NDCCode>
<PackageDescription>16 TABLET, FILM COATED in 1 BOTTLE (21695-280-16)</PackageDescription>
<NDC11Code>21695-0280-16</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (21695-280-20)</PackageDescription>
<NDC11Code>21695-0280-20</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-28</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (21695-280-28)</PackageDescription>
<NDC11Code>21695-0280-28</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (21695-280-30)</PackageDescription>
<NDC11Code>21695-0280-30</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (21695-280-60)</PackageDescription>
<NDC11Code>21695-0280-60</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (21695-280-90)</PackageDescription>
<NDC11Code>21695-0280-90</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
</NDCList>