RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "69452-465-81",
      "PackageDescription": "400 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (69452-465-81) ",
      "NDC11Code": "69452-0465-81",
      "ProductNDC": "69452-465",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Cetirizine Hydrochloride",
      "NonProprietaryName": "Cetirizine Hydrochloride",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20241020",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078862",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "CETIRIZINE HYDROCHLORIDE",
      "StrengthNumber": "10",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-12-16",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20241020",
      "SamplePackage": "N",
      "IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
    },
    {
      "NDCCode": "69452-305-81",
      "PackageDescription": "400 CAPSULE, LIQUID FILLED in 1 BOTTLE (69452-305-81) ",
      "NDC11Code": "69452-0305-81",
      "ProductNDC": "69452-305",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Ibuprofen",
      "NonProprietaryName": "Ibuprofen",
      "DosageFormName": "CAPSULE, LIQUID FILLED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20210204",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078682",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "IBUPROFEN",
      "StrengthNumber": "200",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-12-22",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20210204",
      "SamplePackage": "N",
      "IndicationAndUsage": "temporarily relieves minor aches and pains due to:. headache. toothache. backache. menstrual cramps. the common cold. muscular aches. minor pain of arthritis. temporarily reduces fever."
    },
    {
      "NDCCode": "69452-394-81",
      "PackageDescription": "400 TABLET, FILM COATED in 1 BOTTLE (69452-394-81) ",
      "NDC11Code": "69452-0394-81",
      "ProductNDC": "69452-394",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Acetaminophen And Ibuprofen",
      "NonProprietaryName": "Acetaminophen And Ibuprofen",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20230908",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA216999",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "IBUPROFEN; ACETAMINOPHEN",
      "StrengthNumber": "125; 250",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-12-16",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20251205",
      "SamplePackage": "N",
      "IndicationAndUsage": "Uses: 1 temporarily relieves minor aches and pains due to:, 2 headache, 3 toothache, 4 backache, 5 menstrual cramps, 6 muscular aches, 7 minor pain of arthritis."
    },
    {
      "NDCCode": "69452-513-81",
      "PackageDescription": "400 CAPSULE, LIQUID FILLED in 1 BOTTLE (69452-513-81) ",
      "NDC11Code": "69452-0513-81",
      "ProductNDC": "69452-513",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Dye-free Pain Relief",
      "NonProprietaryName": "Ibuprofen",
      "DosageFormName": "CAPSULE, LIQUID FILLED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20251027",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078682",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "IBUPROFEN",
      "StrengthNumber": "200",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-24",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20251027",
      "SamplePackage": "N",
      "IndicationAndUsage": "■ temporarily relieves minor aches and pains due to. ■ headache ■ toothache ■ backache ■ menstrual cramps ■ the common cold ■ muscular aches ■ minor pain of arthritis ■ temporarily reduces fever."
    },
    {
      "NDCCode": "69452-175-17",
      "PackageDescription": "60 CAPSULE, LIQUID FILLED in 1 BOTTLE (69452-175-17) ",
      "NDC11Code": "69452-0175-17",
      "ProductNDC": "69452-175",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Omega-3-acid Ethyl Ester",
      "NonProprietaryName": "Omega-3-acid Ethyl Esters",
      "DosageFormName": "CAPSULE, LIQUID FILLED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170115",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA206455",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "OMEGA-3-ACID ETHYL ESTERS",
      "StrengthNumber": "900",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Fatty Acids, Omega-3 [CS], Omega-3 Fatty Acid [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-05-08",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170115",
      "SamplePackage": "N",
      "IndicationAndUsage": "Omega-3-acid ethyl esters capsules are indicated as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (greater than or equal to 500 mg/dL) hypertriglyceridemia. Usage Considerations: Patients should be placed on an appropriate lipid-lowering diet before receiving omega-3-acid ethyl esters capsules and should continue this diet during treatment with omega-3-acid ethyl esters capsules. Laboratory studies should be done to ascertain that the lipid levels are consistently abnormal before instituting therapy with omega-3-acid ethyl esters capsules. Every attempt should be made to control serum lipids with appropriate diet, exercise, weight loss in obese patients, and control of any medical problems such as diabetes mellitus and hypothyroidism that are contributing to the lipid abnormalities. Medications known to exacerbate hypertriglyceridemia (such as beta blockers, thiazides, estrogens) should be discontinued or changed, if possible, prior to consideration of TG-lowering drug therapy. Limitations of Use:. The effect of omega-3-acid ethyl esters capsules on the risk for pancreatitis has not been determined. The effect of omega-3-acid ethyl esters capsules on cardiovascular mortality and morbidity has not been determined.",
      "Description": "Omega-3-acid ethyl esters, a lipid-regulating agent, are supplied as a liquid-filled gel capsule for oral administration. Each 1 gram capsule of omega-3-acid ethyl esters contains at least 900 mg of the ethyl esters of omega-3 fatty acids sourced from fish oils. These are predominantly a combination of ethyl esters of eicosapentaenoic acid (EPA - approximately 465 mg) and docosahexaenoic acid (DHA - approximately 375 mg). The empirical formula of EPA ethyl ester is C 22H 34O 2, and the molecular weight of EPA ethyl ester is 330.51. The structural formula of EPA ethyl ester is:. The empirical formula of DHA ethyl ester is C 24H 36O 2, and the molecular weight of DHA ethyl ester is 356.55. The structural formula of DHA ethyl ester is:. Omega-3-acid ethyl esters capsules, USP also contain 4 mg alpha-tocopherol as an inactive ingredient in the capsule fill. The capsule shell is composed of gelatin, glycerin and water. The capsules are printed with white ink composed of hypromellose, isopropyl alcohol, propylene glycol, titanium dioxide and water."
    },
    {
      "NDCCode": "69452-175-22",
      "PackageDescription": "120 CAPSULE, LIQUID FILLED in 1 BOTTLE (69452-175-22) ",
      "NDC11Code": "69452-0175-22",
      "ProductNDC": "69452-175",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Omega-3-acid Ethyl Ester",
      "NonProprietaryName": "Omega-3-acid Ethyl Esters",
      "DosageFormName": "CAPSULE, LIQUID FILLED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170115",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA206455",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "OMEGA-3-ACID ETHYL ESTERS",
      "StrengthNumber": "900",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Fatty Acids, Omega-3 [CS], Omega-3 Fatty Acid [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-05-08",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170115",
      "SamplePackage": "N",
      "IndicationAndUsage": "Omega-3-acid ethyl esters capsules are indicated as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (greater than or equal to 500 mg/dL) hypertriglyceridemia. Usage Considerations: Patients should be placed on an appropriate lipid-lowering diet before receiving omega-3-acid ethyl esters capsules and should continue this diet during treatment with omega-3-acid ethyl esters capsules. Laboratory studies should be done to ascertain that the lipid levels are consistently abnormal before instituting therapy with omega-3-acid ethyl esters capsules. Every attempt should be made to control serum lipids with appropriate diet, exercise, weight loss in obese patients, and control of any medical problems such as diabetes mellitus and hypothyroidism that are contributing to the lipid abnormalities. Medications known to exacerbate hypertriglyceridemia (such as beta blockers, thiazides, estrogens) should be discontinued or changed, if possible, prior to consideration of TG-lowering drug therapy. Limitations of Use:. The effect of omega-3-acid ethyl esters capsules on the risk for pancreatitis has not been determined. The effect of omega-3-acid ethyl esters capsules on cardiovascular mortality and morbidity has not been determined.",
      "Description": "Omega-3-acid ethyl esters, a lipid-regulating agent, are supplied as a liquid-filled gel capsule for oral administration. Each 1 gram capsule of omega-3-acid ethyl esters contains at least 900 mg of the ethyl esters of omega-3 fatty acids sourced from fish oils. These are predominantly a combination of ethyl esters of eicosapentaenoic acid (EPA - approximately 465 mg) and docosahexaenoic acid (DHA - approximately 375 mg). The empirical formula of EPA ethyl ester is C 22H 34O 2, and the molecular weight of EPA ethyl ester is 330.51. The structural formula of EPA ethyl ester is:. The empirical formula of DHA ethyl ester is C 24H 36O 2, and the molecular weight of DHA ethyl ester is 356.55. The structural formula of DHA ethyl ester is:. Omega-3-acid ethyl esters capsules, USP also contain 4 mg alpha-tocopherol as an inactive ingredient in the capsule fill. The capsule shell is composed of gelatin, glycerin and water. The capsules are printed with white ink composed of hypromellose, isopropyl alcohol, propylene glycol, titanium dioxide and water."
    },
    {
      "NDCCode": "69452-347-13",
      "PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (69452-347-13) ",
      "NDC11Code": "69452-0347-13",
      "ProductNDC": "69452-347",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Eszopiclone",
      "NonProprietaryName": "Eszopiclone",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220601",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091113",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "ESZOPICLONE",
      "StrengthNumber": "1",
      "StrengthUnit": "mg/1",
      "DEASchedule": "CIV",
      "Status": "Active",
      "LastUpdate": "2023-12-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220601",
      "SamplePackage": "N",
      "IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6 week study (adults only), at the end of both 2 week studies (elderly only) and at the end of the 6 month study (adults only).",
      "Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone, USP is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b]pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.81, and its empirical formula is C17H17ClN6O3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone, USP is insoluble in water and slightly soluble in ethanol. Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate. In addition, both the 1 mg and 3 mg tablets contain opadry blue (components of opadry blue are hypromellose, titanium dioxide, triacetin, polyethylene glycol 3350, FD&C Blue#2) and 2 mg tablet contain opadry white (components of opadry white are hypromellose, titanium dioxide and triacetin)."
    },
    {
      "NDCCode": "69452-347-20",
      "PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (69452-347-20) ",
      "NDC11Code": "69452-0347-20",
      "ProductNDC": "69452-347",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Eszopiclone",
      "NonProprietaryName": "Eszopiclone",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220601",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091113",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "ESZOPICLONE",
      "StrengthNumber": "1",
      "StrengthUnit": "mg/1",
      "DEASchedule": "CIV",
      "Status": "Active",
      "LastUpdate": "2023-12-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220601",
      "SamplePackage": "N",
      "IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6 week study (adults only), at the end of both 2 week studies (elderly only) and at the end of the 6 month study (adults only).",
      "Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone, USP is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b]pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.81, and its empirical formula is C17H17ClN6O3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone, USP is insoluble in water and slightly soluble in ethanol. Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate. In addition, both the 1 mg and 3 mg tablets contain opadry blue (components of opadry blue are hypromellose, titanium dioxide, triacetin, polyethylene glycol 3350, FD&C Blue#2) and 2 mg tablet contain opadry white (components of opadry white are hypromellose, titanium dioxide and triacetin)."
    },
    {
      "NDCCode": "69452-348-20",
      "PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (69452-348-20) ",
      "NDC11Code": "69452-0348-20",
      "ProductNDC": "69452-348",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Eszopiclone",
      "NonProprietaryName": "Eszopiclone",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220601",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091113",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "ESZOPICLONE",
      "StrengthNumber": "2",
      "StrengthUnit": "mg/1",
      "DEASchedule": "CIV",
      "Status": "Active",
      "LastUpdate": "2023-12-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220601",
      "SamplePackage": "N",
      "IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6 week study (adults only), at the end of both 2 week studies (elderly only) and at the end of the 6 month study (adults only).",
      "Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone, USP is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b]pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.81, and its empirical formula is C17H17ClN6O3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone, USP is insoluble in water and slightly soluble in ethanol. Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate. In addition, both the 1 mg and 3 mg tablets contain opadry blue (components of opadry blue are hypromellose, titanium dioxide, triacetin, polyethylene glycol 3350, FD&C Blue#2) and 2 mg tablet contain opadry white (components of opadry white are hypromellose, titanium dioxide and triacetin)."
    },
    {
      "NDCCode": "69452-349-20",
      "PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (69452-349-20) ",
      "NDC11Code": "69452-0349-20",
      "ProductNDC": "69452-349",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Eszopiclone",
      "NonProprietaryName": "Eszopiclone",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220601",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091113",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "ESZOPICLONE",
      "StrengthNumber": "3",
      "StrengthUnit": "mg/1",
      "DEASchedule": "CIV",
      "Status": "Active",
      "LastUpdate": "2023-12-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220601",
      "SamplePackage": "N",
      "IndicationAndUsage": "Eszopiclone tablets are indicated for the treatment of insomnia. In controlled outpatient and sleep laboratory studies, eszopiclone tablets administered at bedtime decreased sleep latency and improved sleep maintenance. The clinical trials performed in support of efficacy were up to 6 months in duration. The final formal assessments of sleep latency and maintenance were performed at 4 weeks in the 6 week study (adults only), at the end of both 2 week studies (elderly only) and at the end of the 6 month study (adults only).",
      "Description": "Eszopiclone, USP is a nonbenzodiazepine hypnotic agent that is a pyrrolopyrazine derivative of the cyclopyrrolone class. The chemical name of eszopiclone, USP is (+)-(5S)-6-(5-chloropyridin-2-yl)-7-oxo-6,7-dihydro-5H-pyrrolo[3,4-b]pyrazin-5-yl 4-methylpiperazine-1-carboxylate. Its molecular weight is 388.81, and its empirical formula is C17H17ClN6O3. Eszopiclone, USP has a single chiral center with an (S)-configuration. It has the following chemical structure. Eszopiclone, USP is a white to light-yellow crystalline solid. Eszopiclone, USP is insoluble in water and slightly soluble in ethanol. Eszopiclone, USP is formulated as film-coated tablets for oral administration. Eszopiclone tablets, USP contain 1 mg, 2 mg, or 3 mg eszopiclone and the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate. In addition, both the 1 mg and 3 mg tablets contain opadry blue (components of opadry blue are hypromellose, titanium dioxide, triacetin, polyethylene glycol 3350, FD&C Blue#2) and 2 mg tablet contain opadry white (components of opadry white are hypromellose, titanium dioxide and triacetin)."
    },
    {
      "NDCCode": "0054-0326-56",
      "PackageDescription": "1 POUCH in 1 CARTON (0054-0326-56)  / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
      "NDC11Code": "00054-0326-56",
      "ProductNDC": "0054-0326",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20201217",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203433",
      "LabelerName": "Hikma Pharmaceuticals USA Inc.",
      "SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
      "StrengthNumber": "50; 100",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2024-12-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20201217",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0054-0327-56",
      "PackageDescription": "1 POUCH in 1 CARTON (0054-0327-56)  / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
      "NDC11Code": "00054-0327-56",
      "ProductNDC": "0054-0327",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20201217",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203433",
      "LabelerName": "Hikma Pharmaceuticals USA Inc.",
      "SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
      "StrengthNumber": "50; 250",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2024-12-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20201217",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0054-0328-56",
      "PackageDescription": "1 POUCH in 1 CARTON (0054-0328-56)  / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
      "NDC11Code": "00054-0328-56",
      "ProductNDC": "0054-0328",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20201217",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203433",
      "LabelerName": "Hikma Pharmaceuticals USA Inc.",
      "SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
      "StrengthNumber": "50; 500",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2024-12-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20231219",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0093-7516-31",
      "PackageDescription": "1 POUCH in 1 CARTON (0093-7516-31)  > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
      "NDC11Code": "00093-7516-31",
      "ProductNDC": "0093-7516",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20220323",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213948",
      "LabelerName": "Teva Pharmaceuticals USA, Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "500; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-09-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20220323",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0093-7517-31",
      "PackageDescription": "1 POUCH in 1 CARTON (0093-7517-31)  > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
      "NDC11Code": "00093-7517-31",
      "ProductNDC": "0093-7517",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20220323",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213948",
      "LabelerName": "Teva Pharmaceuticals USA, Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "100; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-09-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20220323",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0093-7518-31",
      "PackageDescription": "1 POUCH in 1 CARTON (0093-7518-31)  > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
      "NDC11Code": "00093-7518-31",
      "ProductNDC": "0093-7518",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20220323",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213948",
      "LabelerName": "Teva Pharmaceuticals USA, Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "250; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-09-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20220323",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "0378-9320-32",
      "PackageDescription": "1 INHALER in 1 CARTON (0378-9320-32)  > 60 POWDER in 1 INHALER",
      "NDC11Code": "00378-9320-32",
      "ProductNDC": "0378-9320",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Wixela Inhub",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20190211",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA208891",
      "LabelerName": "Mylan Pharmaceuticals Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "100; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-09-13",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20190211",
      "SamplePackage": "N",
      "IndicationAndUsage": "Wixela Inhub® is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Wixela Inhub® is fluticasone propionate, a corticosteroid having the chemical name S-Fluoromethyl 6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate, USP is a white to almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Wixela Inhub® is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name (±)-4-Hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-m-xylene-α,α'-diol 1-hydroxy-2-naphthoate (salt) and the following chemical structure. Salmeterol xinafoate, USP is a white to almost white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Wixela Inhub® is a grey colored plastic inhaler containing two foil sealed discs, each disc containing 30 pre-metered doses. Each of the 60 doses contains a white to off white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Wixela Inhub® delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per dose from Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. Meets USP Aerodynamic Particle Size Distribution Test 2."
    },
    {
      "NDCCode": "0378-9321-32",
      "PackageDescription": "1 INHALER in 1 CARTON (0378-9321-32)  > 60 POWDER in 1 INHALER",
      "NDC11Code": "00378-9321-32",
      "ProductNDC": "0378-9321",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Wixela Inhub",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20190211",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA208891",
      "LabelerName": "Mylan Pharmaceuticals Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "250; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-09-13",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20190211",
      "SamplePackage": "N",
      "IndicationAndUsage": "Wixela Inhub® is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Wixela Inhub® is fluticasone propionate, a corticosteroid having the chemical name S-Fluoromethyl 6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate, USP is a white to almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Wixela Inhub® is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name (±)-4-Hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-m-xylene-α,α'-diol 1-hydroxy-2-naphthoate (salt) and the following chemical structure. Salmeterol xinafoate, USP is a white to almost white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Wixela Inhub® is a grey colored plastic inhaler containing two foil sealed discs, each disc containing 30 pre-metered doses. Each of the 60 doses contains a white to off white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Wixela Inhub® delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per dose from Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. Meets USP Aerodynamic Particle Size Distribution Test 2."
    },
    {
      "NDCCode": "0378-9322-32",
      "PackageDescription": "1 INHALER in 1 CARTON (0378-9322-32)  > 60 POWDER in 1 INHALER",
      "NDC11Code": "00378-9322-32",
      "ProductNDC": "0378-9322",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Wixela Inhub",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20190211",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA208891",
      "LabelerName": "Mylan Pharmaceuticals Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "500; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-09-13",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20190211",
      "SamplePackage": "N",
      "IndicationAndUsage": "Wixela Inhub® is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Wixela Inhub® is fluticasone propionate, a corticosteroid having the chemical name S-Fluoromethyl 6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate, USP is a white to almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Wixela Inhub® is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name (±)-4-Hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-m-xylene-α,α'-diol 1-hydroxy-2-naphthoate (salt) and the following chemical structure. Salmeterol xinafoate, USP is a white to almost white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Wixela Inhub® is a grey colored plastic inhaler containing two foil sealed discs, each disc containing 30 pre-metered doses. Each of the 60 doses contains a white to off white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Wixela Inhub® delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per dose from Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. Meets USP Aerodynamic Particle Size Distribution Test 2."
    },
    {
      "NDCCode": "60432-465-51",
      "PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (60432-465-51)  > 50 mL in 1 BOTTLE, GLASS (60432-465-50) ",
      "NDC11Code": "60432-0465-51",
      "ProductNDC": "60432-465",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Lidocaine Hydrochloride",
      "NonProprietaryName": "Lidocaine Hydrochloride",
      "DosageFormName": "SOLUTION",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "19821118",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA087881",
      "LabelerName": "Morton Grove Pharmaceuticals, Inc.",
      "SubstanceName": "LIDOCAINE HYDROCHLORIDE",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
      "Status": "Deprecated",
      "LastUpdate": "2024-01-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20231231",
      "StartMarketingDatePackage": "19821118",
      "SamplePackage": "N",
      "IndicationAndUsage": "Lidocaine Hydrochloride Topical Solution is indicated for the production of topical anesthesia of accessible mucous membranes of the oral and nasal cavities and proximal portions of the digestive tract.",
      "Description": "Lidocaine Hydrochloride Topical Solution, USP 4% contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Topical Solution USP 4% contains lidocaine hydrochloride monohydrate, which is chemically designated as 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate and has the following structural formula. C14H22N2O ∙ HCl ∙ H20                                                                                M.W. 288.81. Each mL contains. Lidocaine Hydrochloride Monohydrate,           40. USP                                                                 mg. Inactive Ingredients:  methylparaben, propylene glycol and purified water.  It may also contain  sodium hydroxide for pH adjustment. The pH range is between 5.0 and 7.0. An aqueous solution for topical use only. NOT FOR INJECTION."
    },
    {
      "NDCCode": "63629-4989-1",
      "PackageDescription": "1 INHALER in 1 CARTON (63629-4989-1)  / 60 POWDER in 1 INHALER",
      "NDC11Code": "63629-4989-01",
      "ProductNDC": "63629-4989",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Wixela Inhub",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20190211",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA208891",
      "LabelerName": "Bryant Ranch Prepack",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "250; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-02-17",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20250213",
      "SamplePackage": "N",
      "IndicationAndUsage": "Wixela Inhub® is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
      "Description": "Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Wixela Inhub® is fluticasone propionate, a corticosteroid having the chemical name S-Fluoromethyl 6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate, USP is a white to almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Wixela Inhub® is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name (±)-4-Hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-m-xylene-α,α'-diol 1-hydroxy-2-naphthoate (salt) and the following chemical structure. Salmeterol xinafoate, USP is a white to almost white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Wixela Inhub® is a grey colored plastic inhaler containing two foil sealed discs, each disc containing 30 pre-metered doses. Each of the 60 doses contains a white to off white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Wixela Inhub® delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per dose from Wixela Inhub® 100/50, Wixela Inhub® 250/50, and Wixela Inhub® 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. Meets USP Aerodynamic Particle Size Distribution Test 2."
    },
    {
      "NDCCode": "64679-465-51",
      "PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (64679-465-51)  / 50 mL in 1 BOTTLE, GLASS (64679-465-50) ",
      "NDC11Code": "64679-0465-51",
      "ProductNDC": "64679-465",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Lidocaine Hydrochloride",
      "NonProprietaryName": "Lidocaine Hydrochloride",
      "DosageFormName": "SOLUTION",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "19821118",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA087881",
      "LabelerName": "Wockhardt USA LLC.",
      "SubstanceName": "LIDOCAINE HYDROCHLORIDE",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
      "Status": "Deprecated",
      "LastUpdate": "2025-11-21",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "19821118",
      "SamplePackage": "N",
      "IndicationAndUsage": "Lidocaine Hydrochloride Topical Solution is indicated for the production of topical anesthesia of accessible mucous membranes of the oral and nasal cavities and proximal portions of the digestive tract.",
      "Description": "Lidocaine Hydrochloride Topical Solution, USP 4% contains a local anesthetic agent and is administered topically. See INDICATIONSfor specific uses. Lidocaine Hydrochloride Topical Solution USP 4% contains lidocaine hydrochloride monohydrate, which is chemically designated as 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate and has the following structural formula. C 14H 22N 2O ∙ HCl ∙ H 20                                                                                M.W. 288.81. Each mL contains. Lidocaine Hydrochloride Monohydrate,           40. USP                                                                 mg. Inactive Ingredients: methylparaben, propylene glycol and purified water.  It may also contain sodium hydroxide for pH adjustment. The pH range is between 5.0 and 7.0. An aqueous solution for topical use only. NOT FOR INJECTION."
    },
    {
      "NDCCode": "68788-8704-6",
      "PackageDescription": "1 POUCH in 1 CARTON (68788-8704-6)  / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
      "NDC11Code": "68788-8704-06",
      "ProductNDC": "68788-8704",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20240628",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203433",
      "LabelerName": "Preferred Pharmaceuticals Inc.",
      "SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
      "StrengthNumber": "50; 100",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-05-16",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20240628",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). ().",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "69097-661-03",
      "PackageDescription": "1 INHALER in 1 CARTON (69097-661-03)  / 60 POWDER in 1 INHALER",
      "NDC11Code": "69097-0661-03",
      "ProductNDC": "69097-661",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260727",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213087",
      "LabelerName": "Cipla USA Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "250; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260727",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .",
      "Description": "Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "69097-662-03",
      "PackageDescription": "1 INHALER in 1 CARTON (69097-662-03)  / 60 POWDER in 1 INHALER",
      "NDC11Code": "69097-0662-03",
      "ProductNDC": "69097-662",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260727",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213087",
      "LabelerName": "Cipla USA Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "100; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260727",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .",
      "Description": "Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "69097-663-03",
      "PackageDescription": "1 INHALER in 1 CARTON (69097-663-03)  / 60 POWDER in 1 INHALER",
      "NDC11Code": "69097-0663-03",
      "ProductNDC": "69097-663",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260727",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213087",
      "LabelerName": "Cipla USA Inc.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "500; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-08-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260727",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2) .",
      "Description": "Fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg are combinations of fluticasone propionate and salmeterol xinafoate. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is supplied in a blue-white plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder, USP 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder, USP 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder, USP 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "70518-2501-0",
      "PackageDescription": "1 INHALER in 1 CARTON (70518-2501-0)  / 60 POWDER in 1 INHALER",
      "NDC11Code": "70518-2501-00",
      "ProductNDC": "70518-2501",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Wixela Inhub",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20191219",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA208891",
      "LabelerName": "REMEDYREPACK INC.",
      "SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
      "StrengthNumber": "250; 50",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2024-11-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20251231",
      "StartMarketingDatePackage": "20191219",
      "SamplePackage": "N",
      "IndicationAndUsage": "Wixela Inhub ® is a combination product containing a corticosteroid and a long-acting beta 2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. ( 1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (  1.2)  .",
      "Description": "Wixela Inhub ® 100/50, Wixela Inhub ® 250/50, and Wixela Inhub ® 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of Wixela Inhub ® is fluticasone propionate, a corticosteroid having the chemical name S-Fluoromethyl 6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure:. Fluticasone propionate, USP is a white to almost white powder with a molecular weight of 500.6, and the empirical formula is C 25H 31F 3O 5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of Wixela Inhub ® is salmeterol xinafoate, a beta 2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name (±)-4-Hydroxy-α 1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]- m-xylene-α,α'-diol 1-hydroxy-2-naphthoate (salt) and the following chemical structure:. Salmeterol xinafoate, USP is a white to almost white powder with a molecular weight of 603.8, and the empirical formula is C 25H 37NO 4C 11H 8O 3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Wixela Inhub ® is a grey colored plastic inhaler containing two foil sealed discs, each disc containing 30 pre-metered doses. Each of the 60 doses contains a white to off white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, Wixela Inhub ® delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per dose from Wixela Inhub ® 100/50, Wixela Inhub ® 250/50, and Wixela Inhub ® 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV 1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile. Meets USP Aerodynamic Particle Size Distribution Test 2."
    },
    {
      "NDCCode": "70518-3968-0",
      "PackageDescription": "1 POUCH in 1 CARTON (70518-3968-0)  / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
      "NDC11Code": "70518-3968-00",
      "ProductNDC": "70518-3968",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20231226",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203433",
      "LabelerName": "REMEDYREPACK INC.",
      "SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
      "StrengthNumber": "50; 250",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-13",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20231226",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta 2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. ( 1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). ( 1.2) .",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure:. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C 25H 31F 3O 5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta 2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α 1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure:. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C 25H 37NO 4C 11H 8O 3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV 120% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "70518-4406-0",
      "PackageDescription": "1 POUCH in 1 CARTON (70518-4406-0)  / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
      "NDC11Code": "70518-4406-00",
      "ProductNDC": "70518-4406",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fluticasone Propionate And Salmeterol",
      "NonProprietaryName": "Fluticasone Propionate And Salmeterol",
      "DosageFormName": "POWDER",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20250727",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203433",
      "LabelerName": "REMEDYREPACK INC.",
      "SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
      "StrengthNumber": "50; 100",
      "StrengthUnit": "ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-01-21",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20250727",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta 2-adrenergic agonist (LABA) indicated for: : 1 Twice-daily treatment of asthma in patients aged 4 years and older. ( 1.1) , 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). ( 1.2) .",
      "Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure:. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C 25H 31F 3O 5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta 2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α 1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure:. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C 25H 37NO 4C 11H 8O 3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV 120% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
    },
    {
      "NDCCode": "69452-100-20",
      "PackageDescription": "100 TABLET in 1 BOTTLE (69452-100-20)",
      "NDC11Code": "69452-0100-20",
      "ProductNDC": "69452-100",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Metoclopramide",
      "NonProprietaryName": "Metoclopramide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20151215",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078807",
      "LabelerName": "Bionpharma Inc.",
      "SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
      "StrengthNumber": "5",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2017-12-18",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20171231"
    }
  ]
}
                    

{"NDC":[{"NDCCode":"69452-465-81","ProprietaryName":"Cetirizine Hydrochloride","NonProprietaryName":"Cetirizine Hydrochloride"},{"NDCCode":"69452-305-81","ProprietaryName":"Ibuprofen","NonProprietaryName":"Ibuprofen"},{"NDCCode":"69452-394-81","ProprietaryName":"Acetaminophen And Ibuprofen","NonProprietaryName":"Acetaminophen And Ibuprofen"},{"NDCCode":"69452-513-81","ProprietaryName":"Dye-free Pain Relief","NonProprietaryName":"Ibuprofen"},{"NDCCode":"69452-175-17","ProprietaryName":"Omega-3-acid Ethyl Ester","NonProprietaryName":"Omega-3-acid Ethyl Esters"},{"NDCCode":"69452-175-22","ProprietaryName":"Omega-3-acid Ethyl Ester","NonProprietaryName":"Omega-3-acid Ethyl Esters"},{"NDCCode":"69452-347-13","ProprietaryName":"Eszopiclone","NonProprietaryName":"Eszopiclone"},{"NDCCode":"69452-347-20","ProprietaryName":"Eszopiclone","NonProprietaryName":"Eszopiclone"},{"NDCCode":"69452-348-20","ProprietaryName":"Eszopiclone","NonProprietaryName":"Eszopiclone"},{"NDCCode":"69452-349-20","ProprietaryName":"Eszopiclone","NonProprietaryName":"Eszopiclone"},{"NDCCode":"0054-0326-56","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0054-0327-56","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0054-0328-56","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0093-7516-31","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0093-7517-31","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0093-7518-31","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0378-9320-32","ProprietaryName":"Wixela Inhub","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0378-9321-32","ProprietaryName":"Wixela Inhub","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"0378-9322-32","ProprietaryName":"Wixela Inhub","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"60432-465-51","ProprietaryName":"Lidocaine Hydrochloride","NonProprietaryName":"Lidocaine Hydrochloride"},{"NDCCode":"63629-4989-1","ProprietaryName":"Wixela Inhub","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"64679-465-51","ProprietaryName":"Lidocaine Hydrochloride","NonProprietaryName":"Lidocaine Hydrochloride"},{"NDCCode":"68788-8704-6","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"69097-661-03","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"69097-662-03","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"69097-663-03","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"70518-2501-0","ProprietaryName":"Wixela Inhub","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"70518-3968-0","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"70518-4406-0","ProprietaryName":"Fluticasone Propionate And Salmeterol","NonProprietaryName":"Fluticasone Propionate And Salmeterol"},{"NDCCode":"69452-100-20","ProprietaryName":"Metoclopramide","NonProprietaryName":"Metoclopramide"}]}
                    

<NDCList><NDC><NDCCode>69452-465-81</NDCCode><ProprietaryName>Cetirizine Hydrochloride</ProprietaryName><NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>69452-305-81</NDCCode><ProprietaryName>Ibuprofen</ProprietaryName><NonProprietaryName>Ibuprofen</NonProprietaryName></NDC><NDC><NDCCode>69452-394-81</NDCCode><ProprietaryName>Acetaminophen And Ibuprofen</ProprietaryName><NonProprietaryName>Acetaminophen And Ibuprofen</NonProprietaryName></NDC><NDC><NDCCode>69452-513-81</NDCCode><ProprietaryName>Dye-free Pain Relief</ProprietaryName><NonProprietaryName>Ibuprofen</NonProprietaryName></NDC><NDC><NDCCode>69452-175-17</NDCCode><ProprietaryName>Omega-3-acid Ethyl Ester</ProprietaryName><NonProprietaryName>Omega-3-acid Ethyl Esters</NonProprietaryName></NDC><NDC><NDCCode>69452-175-22</NDCCode><ProprietaryName>Omega-3-acid Ethyl Ester</ProprietaryName><NonProprietaryName>Omega-3-acid Ethyl Esters</NonProprietaryName></NDC><NDC><NDCCode>69452-347-13</NDCCode><ProprietaryName>Eszopiclone</ProprietaryName><NonProprietaryName>Eszopiclone</NonProprietaryName></NDC><NDC><NDCCode>69452-347-20</NDCCode><ProprietaryName>Eszopiclone</ProprietaryName><NonProprietaryName>Eszopiclone</NonProprietaryName></NDC><NDC><NDCCode>69452-348-20</NDCCode><ProprietaryName>Eszopiclone</ProprietaryName><NonProprietaryName>Eszopiclone</NonProprietaryName></NDC><NDC><NDCCode>69452-349-20</NDCCode><ProprietaryName>Eszopiclone</ProprietaryName><NonProprietaryName>Eszopiclone</NonProprietaryName></NDC><NDC><NDCCode>0054-0326-56</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0054-0327-56</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0054-0328-56</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0093-7516-31</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0093-7517-31</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0093-7518-31</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0378-9320-32</NDCCode><ProprietaryName>Wixela Inhub</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0378-9321-32</NDCCode><ProprietaryName>Wixela Inhub</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>0378-9322-32</NDCCode><ProprietaryName>Wixela Inhub</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>60432-465-51</NDCCode><ProprietaryName>Lidocaine Hydrochloride</ProprietaryName><NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>63629-4989-1</NDCCode><ProprietaryName>Wixela Inhub</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>64679-465-51</NDCCode><ProprietaryName>Lidocaine Hydrochloride</ProprietaryName><NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>68788-8704-6</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>69097-661-03</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>69097-662-03</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>69097-663-03</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>70518-2501-0</NDCCode><ProprietaryName>Wixela Inhub</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>70518-3968-0</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>70518-4406-0</NDCCode><ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName><NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName></NDC><NDC><NDCCode>69452-100-20</NDCCode><ProprietaryName>Metoclopramide</ProprietaryName><NonProprietaryName>Metoclopramide</NonProprietaryName></NDC></NDCList>