{
"NDC": [
{
"NDCCode": "69482-475-06",
"PackageDescription": "6 CAPSULE in 1 BOTTLE (69482-475-06) ",
"NDC11Code": "69482-0475-06",
"ProductNDC": "69482-475",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Okebo",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204234",
"LabelerName": "Encore Dermatology Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20171120",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of Okebo and other antibacterial drugs. Okebo should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae., 3 Lymphogranuloma venereum caused by Chlamydia trachomatis., 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci., 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence., 6 Inclusion conjunctivitis caused by Chlamydia trachomatis., 7 Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis., 8 Nongonococcal urethritis caused by Ureaplasma urealyticum., 9 Relapsing fever due to Borrelia recurrentis.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Okebo (Doxycycline monohydrate USP) Capsules, 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate Type A Potato. Hard gelatin capsule contains black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "69482-450-06",
"PackageDescription": "6 CAPSULE in 1 BOTTLE (69482-450-06) ",
"NDC11Code": "69482-0450-06",
"ProductNDC": "69482-450",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Okebo",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204234",
"LabelerName": "Encore Dermatology Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20171120",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of Okebo and other antibacterial drugs. Okebo should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae., 3 Lymphogranuloma venereum caused by Chlamydia trachomatis., 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci., 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence., 6 Inclusion conjunctivitis caused by Chlamydia trachomatis., 7 Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis., 8 Nongonococcal urethritis caused by Ureaplasma urealyticum., 9 Relapsing fever due to Borrelia recurrentis.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Okebo (Doxycycline monohydrate USP) Capsules, 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate Type A Potato. Hard gelatin capsule contains black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "69482-475-99",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (69482-475-99) ",
"NDC11Code": "69482-0475-99",
"ProductNDC": "69482-475",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Okebo",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204234",
"LabelerName": "Encore Dermatology Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20171120",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of Okebo and other antibacterial drugs. Okebo should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae., 3 Lymphogranuloma venereum caused by Chlamydia trachomatis., 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci., 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence., 6 Inclusion conjunctivitis caused by Chlamydia trachomatis., 7 Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis., 8 Nongonococcal urethritis caused by Ureaplasma urealyticum., 9 Relapsing fever due to Borrelia recurrentis.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Okebo (Doxycycline monohydrate USP) Capsules, 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate Type A Potato. Hard gelatin capsule contains black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "61037-475-06",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (61037-475-06) ",
"NDC11Code": "61037-0475-06",
"ProductNDC": "61037-475",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer Gel",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200316",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Bajaj Medical, LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200316",
"SamplePackage": "N",
"IndicationAndUsage": "Hand sanitizer to help reduce bacteria on the skin."
},
{
"NDCCode": "68382-475-06",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-475-06) ",
"NDC11Code": "68382-0475-06",
"ProductNDC": "68382-475",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pramipexole Dihydrochloride",
"NonProprietaryName": "Pramipexole Dihydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180424",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202891",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "PRAMIPEXOLE DIHYDROCHLORIDE",
"StrengthNumber": ".75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180424",
"SamplePackage": "N",
"IndicationAndUsage": "Pramipexole dihydrochloride extended-release tablets are a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).",
"Description": "Pramipexole dihydrochloride extended-release tablets contain pramipexole, a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its molecular formula is C10H17N3S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride, USP (Monohydrate) is white to almost white crystalline powder. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is freely soluble in water; soluble in methanol, slightly soluble in alcohol and practically insoluble in methylene chloride. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, corn starch, dibasic calcium phosphate dihydrate, hydrogenated castor oil, lactose monohydrate, magnesium stearate, mannitol and stearyl alcohol."
},
{
"NDCCode": "68428-475-06",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (68428-475-06) ",
"NDC11Code": "68428-0475-06",
"ProductNDC": "68428-475",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lepidium Bonariense",
"NonProprietaryName": "Lepidium Didymum Leaf",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "LEPIDIUM DIDYMUM LEAF",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "73763-475-06",
"PackageDescription": "946 mL in 1 BOTTLE, DISPENSING (73763-475-06) ",
"NDC11Code": "73763-0475-06",
"ProductNDC": "73763-475",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Infinity Shields Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200413",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Aquagenics Technologies Inc",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200413",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria on skin."
},
{
"NDCCode": "78623-475-06",
"PackageDescription": "30 mL in 1 BOTTLE (78623-475-06) ",
"NDC11Code": "78623-0475-06",
"ProductNDC": "78623-475",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210105",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "ningbo fareast industry co.,ltd",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210105",
"SamplePackage": "N",
"IndicationAndUsage": "to help reduce bacteria that potentially can cause disease.for use when soap and water are not available."
},
{
"NDCCode": "0093-0010-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0093-0010-06) ",
"NDC11Code": "00093-0010-06",
"ProductNDC": "0093-0010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077006",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151101",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "This product contains tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). It has the following structural formula. C26H37NO7 M.W. 475.6. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Each tolterodine tartrate tablet, for oral administration, contains 1 mg or 2 mg of tolterodine tartrate. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate, and titanium dioxide."
},
{
"NDCCode": "0093-0018-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0093-0018-06) ",
"NDC11Code": "00093-0018-06",
"ProductNDC": "0093-0018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077006",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151101",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "This product contains tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). It has the following structural formula. C26H37NO7 M.W. 475.6. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Each tolterodine tartrate tablet, for oral administration, contains 1 mg or 2 mg of tolterodine tartrate. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate, and titanium dioxide."
},
{
"NDCCode": "0143-9466-06",
"PackageDescription": "6 BAG in 1 CARTON (0143-9466-06) / 250 mL in 1 BAG (0143-9466-01) ",
"NDC11Code": "00143-9466-06",
"ProductNDC": "0143-9466",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyzavan",
"NonProprietaryName": "Vancomycin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211962",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VANCOMYCIN",
"StrengthNumber": "1.25",
"StrengthUnit": "g/250mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L."
},
{
"NDCCode": "0143-9467-06",
"PackageDescription": "6 BAG in 1 CARTON (0143-9467-06) / 350 mL in 1 BAG (0143-9467-01) ",
"NDC11Code": "00143-9467-06",
"ProductNDC": "0143-9467",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyzavan",
"NonProprietaryName": "Vancomycin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211962",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VANCOMYCIN",
"StrengthNumber": "1.75",
"StrengthUnit": "g/350mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L."
},
{
"NDCCode": "0143-9468-06",
"PackageDescription": "6 BAG in 1 CARTON (0143-9468-06) / 150 mL in 1 BAG (0143-9468-01) ",
"NDC11Code": "00143-9468-06",
"ProductNDC": "0143-9468",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyzavan",
"NonProprietaryName": "Vancomycin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211962",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VANCOMYCIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L."
},
{
"NDCCode": "0143-9469-06",
"PackageDescription": "6 BAG in 1 CARTON (0143-9469-06) / 300 mL in 1 BAG (0143-9469-01) ",
"NDC11Code": "00143-9469-06",
"ProductNDC": "0143-9469",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyzavan",
"NonProprietaryName": "Vancomycin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211962",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VANCOMYCIN",
"StrengthNumber": "1.5",
"StrengthUnit": "g/300mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L."
},
{
"NDCCode": "0143-9470-06",
"PackageDescription": "6 BAG in 1 CARTON (0143-9470-06) / 400 mL in 1 BAG (0143-9470-01) ",
"NDC11Code": "00143-9470-06",
"ProductNDC": "0143-9470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyzavan",
"NonProprietaryName": "Vancomycin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211962",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VANCOMYCIN",
"StrengthNumber": "2",
"StrengthUnit": "g/400mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L."
},
{
"NDCCode": "0143-9471-06",
"PackageDescription": "6 BAG in 1 CARTON (0143-9471-06) / 100 mL in 1 BAG (0143-9471-01) ",
"NDC11Code": "00143-9471-06",
"ProductNDC": "0143-9471",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyzavan",
"NonProprietaryName": "Vancomycin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211962",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VANCOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L."
},
{
"NDCCode": "0143-9472-06",
"PackageDescription": "6 BAG in 1 CARTON (0143-9472-06) / 200 mL in 1 BAG (0143-9472-01) ",
"NDC11Code": "00143-9472-06",
"ProductNDC": "0143-9472",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyzavan",
"NonProprietaryName": "Vancomycin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211962",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VANCOMYCIN",
"StrengthNumber": "1",
"StrengthUnit": "g/200mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L."
},
{
"NDCCode": "0990-4178-03",
"PackageDescription": "12 BAG in 1 CASE (0990-4178-03) / 500 mL in 1 BAG",
"NDC11Code": "00990-4178-03",
"ProductNDC": "0990-4178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn-pf",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019398",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE",
"StrengthNumber": "534; 831; 475; 125; 300; 360; 125; 452; 490; 861; 370; 576; 270; 220; 570; 347; 50; 44",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211001",
"SamplePackage": "N",
"IndicationAndUsage": "Aminosyn-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 7% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes, (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.",
"Description": "Aminosyn®-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn®-PF 7% is oxygen sensitive. The formulation is described below. * Amount cited is for lysine alone and does not include the acetate salt. a From lysine acetate. The formulas for the individual amino acids present in Aminosyn-PF 7% are as follows. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "12497-1044-1",
"PackageDescription": "1 BAG in 1 DRUM (12497-1044-1) > 50 kg in 1 BAG",
"NDC11Code": "12497-1044-01",
"ProductNDC": "12497-1044",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Amino Acid Mixture F-14",
"DosageFormName": "POWDER",
"StartMarketingDate": "19880420",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Kyowa Hakko Bio Co., Ltd.",
"SubstanceName": "ISOLEUCINE; PROLINE; VALINE; LEUCINE; ASPARTIC ACID; ARGININE; GLYCINE; HISTIDINE; THREONINE; SERINE; ALANINE; METHIONINE; TAURINE; GLUTAMIC ACID",
"StrengthNumber": "4.965; 4.115; 4.695; 8.475; 1.935; 7.385; 2.18; 2.905; 2.54; 2.3; 3.27; 2.06; .15; 3.025",
"StrengthUnit": "kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20-APR-88"
},
{
"NDCCode": "16571-126-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (16571-126-06) ",
"NDC11Code": "16571-0126-06",
"ProductNDC": "16571-126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204721",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200124",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "Tolterodine tartrate tablets contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7 , and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, opadry white 03A18585 [hypromellose, purified stearic acid, titanium dioxide, microcrystalline cellulose]."
},
{
"NDCCode": "16571-127-06",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (16571-127-06) ",
"NDC11Code": "16571-0127-06",
"ProductNDC": "16571-127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204721",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200124",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "Tolterodine tartrate tablets contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7 , and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, opadry white 03A18585 [hypromellose, purified stearic acid, titanium dioxide, microcrystalline cellulose]."
},
{
"NDCCode": "41250-475-00",
"PackageDescription": "1 BOTTLE in 1 CARTON (41250-475-00) / 120 mL in 1 BOTTLE",
"NDC11Code": "41250-0475-00",
"ProductNDC": "41250-475",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens 24 Hour Allergy",
"NonProprietaryName": "Cetirizine Hcl",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20151202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204226",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250610",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "41250-475-26",
"PackageDescription": "1 BOTTLE in 1 CARTON (41250-475-26) / 118 mL in 1 BOTTLE",
"NDC11Code": "41250-0475-26",
"ProductNDC": "41250-475",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens 24 Hour Allergy",
"NonProprietaryName": "Cetirizine Hcl",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20151202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204226",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151202",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "41250-475-34",
"PackageDescription": "1 BOTTLE in 1 CARTON (41250-475-34) / 236 mL in 1 BOTTLE",
"NDC11Code": "41250-0475-34",
"ProductNDC": "41250-475",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens 24 Hour Allergy",
"NonProprietaryName": "Cetirizine Hcl",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20151202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204226",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151202",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "43975-322-03",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-322-03) ",
"NDC11Code": "43975-0322-03",
"ProductNDC": "43975-322",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204562",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .",
"Description": "Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3."
},
{
"NDCCode": "43975-322-09",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-322-09) ",
"NDC11Code": "43975-0322-09",
"ProductNDC": "43975-322",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204562",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .",
"Description": "Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3."
},
{
"NDCCode": "43975-322-50",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-322-50) ",
"NDC11Code": "43975-0322-50",
"ProductNDC": "43975-322",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204562",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .",
"Description": "Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3."
},
{
"NDCCode": "43975-323-03",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-323-03) ",
"NDC11Code": "43975-0323-03",
"ProductNDC": "43975-323",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204562",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .",
"Description": "Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3."
},
{
"NDCCode": "43975-323-09",
"PackageDescription": "90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-323-09) ",
"NDC11Code": "43975-0323-09",
"ProductNDC": "43975-323",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204562",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .",
"Description": "Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3."
},
{
"NDCCode": "43975-323-50",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-323-50) ",
"NDC11Code": "43975-0323-50",
"ProductNDC": "43975-323",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204562",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190829",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .",
"Description": "Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69482-475-06</NDCCode>
<PackageDescription>6 CAPSULE in 1 BOTTLE (69482-475-06) </PackageDescription>
<NDC11Code>69482-0475-06</NDC11Code>
<ProductNDC>69482-475</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Okebo</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204234</ApplicationNumber>
<LabelerName>Encore Dermatology Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of Okebo and other antibacterial drugs. Okebo should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae., 3 Lymphogranuloma venereum caused by Chlamydia trachomatis., 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci., 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence., 6 Inclusion conjunctivitis caused by Chlamydia trachomatis., 7 Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis., 8 Nongonococcal urethritis caused by Ureaplasma urealyticum., 9 Relapsing fever due to Borrelia recurrentis.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Okebo (Doxycycline monohydrate USP) Capsules, 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate Type A Potato. Hard gelatin capsule contains black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69482-450-06</NDCCode>
<PackageDescription>6 CAPSULE in 1 BOTTLE (69482-450-06) </PackageDescription>
<NDC11Code>69482-0450-06</NDC11Code>
<ProductNDC>69482-450</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Okebo</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204234</ApplicationNumber>
<LabelerName>Encore Dermatology Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of Okebo and other antibacterial drugs. Okebo should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae., 3 Lymphogranuloma venereum caused by Chlamydia trachomatis., 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci., 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence., 6 Inclusion conjunctivitis caused by Chlamydia trachomatis., 7 Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis., 8 Nongonococcal urethritis caused by Ureaplasma urealyticum., 9 Relapsing fever due to Borrelia recurrentis.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Okebo (Doxycycline monohydrate USP) Capsules, 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate Type A Potato. Hard gelatin capsule contains black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>69482-475-99</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (69482-475-99) </PackageDescription>
<NDC11Code>69482-0475-99</NDC11Code>
<ProductNDC>69482-475</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Okebo</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204234</ApplicationNumber>
<LabelerName>Encore Dermatology Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of Okebo and other antibacterial drugs. Okebo should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae., 2 Respiratory tract infections caused by Mycoplasma pneumoniae., 3 Lymphogranuloma venereum caused by Chlamydia trachomatis., 4 Psittacosis (ornithosis) caused by Chlamydophila psittaci., 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence., 6 Inclusion conjunctivitis caused by Chlamydia trachomatis., 7 Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis., 8 Nongonococcal urethritis caused by Ureaplasma urealyticum., 9 Relapsing fever due to Borrelia recurrentis.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Okebo (Doxycycline monohydrate USP) Capsules, 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and sodium starch glycolate Type A Potato. Hard gelatin capsule contains black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>61037-475-06</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (61037-475-06) </PackageDescription>
<NDC11Code>61037-0475-06</NDC11Code>
<ProductNDC>61037-475</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer Gel</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200316</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Bajaj Medical, LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand sanitizer to help reduce bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68382-475-06</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-475-06) </PackageDescription>
<NDC11Code>68382-0475-06</NDC11Code>
<ProductNDC>68382-475</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
<NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180424</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202891</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>.75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180424</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pramipexole dihydrochloride extended-release tablets are a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
<Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole, a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its molecular formula is C10H17N3S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride, USP (Monohydrate) is white to almost white crystalline powder. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is freely soluble in water; soluble in methanol, slightly soluble in alcohol and practically insoluble in methylene chloride. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, corn starch, dibasic calcium phosphate dihydrate, hydrogenated castor oil, lactose monohydrate, magnesium stearate, mannitol and stearyl alcohol.</Description>
</NDC>
<NDC>
<NDCCode>68428-475-06</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (68428-475-06) </PackageDescription>
<NDC11Code>68428-0475-06</NDC11Code>
<ProductNDC>68428-475</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lepidium Bonariense</ProprietaryName>
<NonProprietaryName>Lepidium Didymum Leaf</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>LEPIDIUM DIDYMUM LEAF</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>73763-475-06</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, DISPENSING (73763-475-06) </PackageDescription>
<NDC11Code>73763-0475-06</NDC11Code>
<ProductNDC>73763-475</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Infinity Shields Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200413</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Aquagenics Technologies Inc</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria on skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>78623-475-06</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE (78623-475-06) </PackageDescription>
<NDC11Code>78623-0475-06</NDC11Code>
<ProductNDC>78623-475</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210105</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>ningbo fareast industry co.,ltd</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to help reduce bacteria that potentially can cause disease.for use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0093-0010-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0093-0010-06) </PackageDescription>
<NDC11Code>00093-0010-06</NDC11Code>
<ProductNDC>0093-0010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077006</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>This product contains tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). It has the following structural formula. C26H37NO7 M.W. 475.6. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Each tolterodine tartrate tablet, for oral administration, contains 1 mg or 2 mg of tolterodine tartrate. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0093-0018-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0093-0018-06) </PackageDescription>
<NDC11Code>00093-0018-06</NDC11Code>
<ProductNDC>0093-0018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077006</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>This product contains tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). It has the following structural formula. C26H37NO7 M.W. 475.6. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Each tolterodine tartrate tablet, for oral administration, contains 1 mg or 2 mg of tolterodine tartrate. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0143-9466-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0143-9466-06) / 250 mL in 1 BAG (0143-9466-01) </PackageDescription>
<NDC11Code>00143-9466-06</NDC11Code>
<ProductNDC>0143-9466</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyzavan</ProprietaryName>
<NonProprietaryName>Vancomycin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211962</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VANCOMYCIN</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/250mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0143-9467-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0143-9467-06) / 350 mL in 1 BAG (0143-9467-01) </PackageDescription>
<NDC11Code>00143-9467-06</NDC11Code>
<ProductNDC>0143-9467</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyzavan</ProprietaryName>
<NonProprietaryName>Vancomycin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211962</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VANCOMYCIN</SubstanceName>
<StrengthNumber>1.75</StrengthNumber>
<StrengthUnit>g/350mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0143-9468-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0143-9468-06) / 150 mL in 1 BAG (0143-9468-01) </PackageDescription>
<NDC11Code>00143-9468-06</NDC11Code>
<ProductNDC>0143-9468</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyzavan</ProprietaryName>
<NonProprietaryName>Vancomycin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211962</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VANCOMYCIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0143-9469-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0143-9469-06) / 300 mL in 1 BAG (0143-9469-01) </PackageDescription>
<NDC11Code>00143-9469-06</NDC11Code>
<ProductNDC>0143-9469</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyzavan</ProprietaryName>
<NonProprietaryName>Vancomycin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211962</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VANCOMYCIN</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/300mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0143-9470-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0143-9470-06) / 400 mL in 1 BAG (0143-9470-01) </PackageDescription>
<NDC11Code>00143-9470-06</NDC11Code>
<ProductNDC>0143-9470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyzavan</ProprietaryName>
<NonProprietaryName>Vancomycin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211962</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VANCOMYCIN</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/400mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0143-9471-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0143-9471-06) / 100 mL in 1 BAG (0143-9471-01) </PackageDescription>
<NDC11Code>00143-9471-06</NDC11Code>
<ProductNDC>0143-9471</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyzavan</ProprietaryName>
<NonProprietaryName>Vancomycin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211962</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VANCOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0143-9472-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0143-9472-06) / 200 mL in 1 BAG (0143-9472-01) </PackageDescription>
<NDC11Code>00143-9472-06</NDC11Code>
<ProductNDC>0143-9472</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyzavan</ProprietaryName>
<NonProprietaryName>Vancomycin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211962</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VANCOMYCIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/200mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYZAVAN is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients (1 month and older) for whom appropriate dosing with this formulation can be achieved: : 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags contain vancomycin as vancomycin hydrochloride. It is a tricyclic glycopeptide antibacterial drug derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-{[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]-oxy}-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino]valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36(iminometha-no)-13,16:31,35-dimetheno-1H,16H-[1,6,9]-oxadiazacyclohexadecino-[4,5-m][10,2,16]-benzoxa-diazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. TYZAVAN (Vancomycin Injection, USP), in single-dose flexible bags are sterile, nonpyrogenic premixed 100 mL, 150 mL, 200 mL, 250 mL, 300 mL, 350 mL or 400 mL solution containing 500 mg, 750 mg, 1 g, 1.25 g, 1.5 g, 1.75 g or 2 g vancomycin, respectively, as vancomycin hydrochloride. Each 100 mL of solution contains 1.36 g N-acetyl-D-alanine, 1.26 g L-lysine hydrochloride (monochloride) in water for injection. Hydrochloric acid and sodium hydroxide are used for pH adjustment. The pH is 4.5 to 5.5 and the osmolarity is 350 to 475 mOsmol/L.</Description>
</NDC>
<NDC>
<NDCCode>0990-4178-03</NDCCode>
<PackageDescription>12 BAG in 1 CASE (0990-4178-03) / 500 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-4178-03</NDC11Code>
<ProductNDC>0990-4178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn-pf</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019398</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE</SubstanceName>
<StrengthNumber>534; 831; 475; 125; 300; 360; 125; 452; 490; 861; 370; 576; 270; 220; 570; 347; 50; 44</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aminosyn-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 7% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes, (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.</IndicationAndUsage>
<Description>Aminosyn®-PF 7%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn®-PF 7% is oxygen sensitive. The formulation is described below. * Amount cited is for lysine alone and does not include the acetate salt. a From lysine acetate. The formulas for the individual amino acids present in Aminosyn-PF 7% are as follows. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>12497-1044-1</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (12497-1044-1) > 50 kg in 1 BAG</PackageDescription>
<NDC11Code>12497-1044-01</NDC11Code>
<ProductNDC>12497-1044</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Amino Acid Mixture F-14</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19880420</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Kyowa Hakko Bio Co., Ltd.</LabelerName>
<SubstanceName>ISOLEUCINE; PROLINE; VALINE; LEUCINE; ASPARTIC ACID; ARGININE; GLYCINE; HISTIDINE; THREONINE; SERINE; ALANINE; METHIONINE; TAURINE; GLUTAMIC ACID</SubstanceName>
<StrengthNumber>4.965; 4.115; 4.695; 8.475; 1.935; 7.385; 2.18; 2.905; 2.54; 2.3; 3.27; 2.06; .15; 3.025</StrengthNumber>
<StrengthUnit>kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg; kg/50kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20-APR-88</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>16571-126-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (16571-126-06) </PackageDescription>
<NDC11Code>16571-0126-06</NDC11Code>
<ProductNDC>16571-126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204721</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>Tolterodine tartrate tablets contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7 , and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, opadry white 03A18585 [hypromellose, purified stearic acid, titanium dioxide, microcrystalline cellulose].</Description>
</NDC>
<NDC>
<NDCCode>16571-127-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (16571-127-06) </PackageDescription>
<NDC11Code>16571-0127-06</NDC11Code>
<ProductNDC>16571-127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204721</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>Tolterodine tartrate tablets contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7 , and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, opadry white 03A18585 [hypromellose, purified stearic acid, titanium dioxide, microcrystalline cellulose].</Description>
</NDC>
<NDC>
<NDCCode>41250-475-00</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (41250-475-00) / 120 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>41250-0475-00</NDC11Code>
<ProductNDC>41250-475</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens 24 Hour Allergy</ProprietaryName>
<NonProprietaryName>Cetirizine Hcl</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204226</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-475-26</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (41250-475-26) / 118 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>41250-0475-26</NDC11Code>
<ProductNDC>41250-475</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens 24 Hour Allergy</ProprietaryName>
<NonProprietaryName>Cetirizine Hcl</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204226</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-475-34</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (41250-475-34) / 236 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>41250-0475-34</NDC11Code>
<ProductNDC>41250-475</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens 24 Hour Allergy</ProprietaryName>
<NonProprietaryName>Cetirizine Hcl</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204226</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43975-322-03</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-322-03) </PackageDescription>
<NDC11Code>43975-0322-03</NDC11Code>
<ProductNDC>43975-322</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204562</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .</IndicationAndUsage>
<Description>Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>43975-322-09</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-322-09) </PackageDescription>
<NDC11Code>43975-0322-09</NDC11Code>
<ProductNDC>43975-322</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204562</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .</IndicationAndUsage>
<Description>Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>43975-322-50</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-322-50) </PackageDescription>
<NDC11Code>43975-0322-50</NDC11Code>
<ProductNDC>43975-322</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204562</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .</IndicationAndUsage>
<Description>Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>43975-323-03</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-323-03) </PackageDescription>
<NDC11Code>43975-0323-03</NDC11Code>
<ProductNDC>43975-323</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204562</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .</IndicationAndUsage>
<Description>Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>43975-323-09</NDCCode>
<PackageDescription>90 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-323-09) </PackageDescription>
<NDC11Code>43975-0323-09</NDC11Code>
<ProductNDC>43975-323</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204562</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .</IndicationAndUsage>
<Description>Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>43975-323-50</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (43975-323-50) </PackageDescription>
<NDC11Code>43975-0323-50</NDC11Code>
<ProductNDC>43975-323</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204562</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate extended-release capsules, USP are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)] .</IndicationAndUsage>
<Description>Tolterodine tartrate extended-release capsules, USP contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C 26H 37NO 7, Its structure is:. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pK avalue is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate extended-release capsules 4 mg for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, sucrose, talc and titanium dioxide. Tolterodine tartrate extended-release capsules 2 mg for oral administration contains 2 mg of tolterodine tartrate, and the following Inactive ingredients are colloidal silicon dioxide, dibutyl sebacate, ethylcellulose, FD & C Blue no.2, gelatin, hypromellose, hypromellose phthalate, iron oxide yellow, sucrose, talc and titanium dioxide. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains ammonium hydroxide, iron oxide black, shellac, potassium hydroxide, propylene glycol and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
</NDCList>