{
"NDC": [
{
"NDCCode": "69743-513-23",
"PackageDescription": "1 TUBE in 1 BOX (69743-513-23) > 170 g in 1 TUBE",
"NDC11Code": "69743-0513-23",
"ProductNDC": "69743-513",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rhemu",
"NonProprietaryName": "Rhemu Analgesic",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141215",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Galxee, Inc.",
"SubstanceName": "MENTHOL; METHYL SALICYLATE",
"StrengthNumber": ".07; .1",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2018-03-21",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "67877-513-23",
"PackageDescription": "2000 TABLET, FILM COATED in 1 BOTTLE (67877-513-23) ",
"NDC11Code": "67877-0513-23",
"ProductNDC": "67877-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209288",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181223",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium is indicated: 1 To reduce the risk of:.",
"Description": "Atorvastatin calcium is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole- 1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg or 80 mg of atorvastatin, USP and the following inactive ingredients: Calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The coating material contains hypromellose, polyethylene glycol, talc, titanium dioxide."
},
{
"NDCCode": "0143-9161-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9161-10) / 513 mg in 1 VIAL (0143-9161-01) ",
"NDC11Code": "00143-9161-10",
"ProductNDC": "0143-9161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20230202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "513",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241203",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9161-25",
"PackageDescription": "25 VIAL in 1 PACKAGE (0143-9161-25) / 513 mg in 1 VIAL (0143-9161-01) ",
"NDC11Code": "00143-9161-25",
"ProductNDC": "0143-9161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20230202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "513",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230202",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9162-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9162-10) / 1025 mg in 1 VIAL (0143-9162-01) ",
"NDC11Code": "00143-9162-10",
"ProductNDC": "0143-9162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20230202",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1025",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230202",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9473-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9473-10) / 769 mg in 1 VIAL (0143-9473-01) ",
"NDC11Code": "00143-9473-10",
"ProductNDC": "0143-9473",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20250813",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "769",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250813",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9474-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9474-10) / 1280 mg in 1 VIAL (0143-9474-01) ",
"NDC11Code": "00143-9474-10",
"ProductNDC": "0143-9474",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20250813",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1280",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250813",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0143-9475-10",
"PackageDescription": "10 VIAL in 1 PACKAGE (0143-9475-10) / 1540 mg in 1 VIAL (0143-9475-01) ",
"NDC11Code": "00143-9475-10",
"ProductNDC": "0143-9475",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20250813",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "HIKMA PHARMACEUTICALS USA INC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1540",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250813",
"SamplePackage": "N",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "0338-0122-04",
"PackageDescription": "250 mL in 1 BAG (0338-0122-04) ",
"NDC11Code": "00338-0122-04",
"ProductNDC": "0338-0122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/250mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-0124-04",
"PackageDescription": "300 mL in 1 BAG (0338-0124-04) ",
"NDC11Code": "00338-0124-04",
"ProductNDC": "0338-0124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/300mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240125",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3551-48",
"PackageDescription": "100 mL in 1 BAG (0338-3551-48) ",
"NDC11Code": "00338-3551-48",
"ProductNDC": "0338-3551",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3552-48",
"PackageDescription": "200 mL in 1 BAG (0338-3552-48) ",
"NDC11Code": "00338-3552-48",
"ProductNDC": "0338-3552",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/200mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3580-48",
"PackageDescription": "200 mL in 1 BAG (0338-3580-48) ",
"NDC11Code": "00338-3580-48",
"ProductNDC": "0338-3580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19581114",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3581-01",
"PackageDescription": "100 mL in 1 BAG (0338-3581-01) ",
"NDC11Code": "00338-3581-01",
"ProductNDC": "0338-3581",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3582-01",
"PackageDescription": "150 mL in 1 BAG (0338-3582-01) ",
"NDC11Code": "00338-3582-01",
"ProductNDC": "0338-3582",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "0338-3583-01",
"PackageDescription": "200 mL in 1 BAG (0338-3583-01) ",
"NDC11Code": "00338-3583-01",
"ProductNDC": "0338-3583",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19581114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050671",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/200mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151218",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).",
"Description": "Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous."
},
{
"NDCCode": "42291-513-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (42291-513-60) ",
"NDC11Code": "42291-0513-60",
"ProductNDC": "42291-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pioglitazone And Metformin Hydrochloride",
"NonProprietaryName": "Pioglitazone And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091155",
"LabelerName": "AvKARE, Inc.",
"SubstanceName": "PIOGLITAZONE HYDROCHLORIDE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "15; 850",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [CS],PPAR gamma [CS],Thiazolidinedione [EPC],Thiazolidinediones [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC],Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20150306",
"SamplePackage": "N"
},
{
"NDCCode": "42806-513-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (42806-513-01) ",
"NDC11Code": "42806-0513-01",
"ProductNDC": "42806-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinidine Sulfate",
"NonProprietaryName": "Quinidine Sulfate Tablet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088072",
"LabelerName": "EPIC PHARMA, LLC",
"SubstanceName": "QUINIDINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 2D6 Inhibitor [EPC], Cytochrome P450 2D6 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211215",
"SamplePackage": "N",
"IndicationAndUsage": "In patients with symptomatic atrial fibrillation/flutter whose symptoms are not adequately controlled by measures that reduce the rate of ventricular response, quinidine sulfate is indicated as a means of restoring normal sinus rhythm. If this use of quinidine sulfate does not restore sinus rhythm within a reasonable time (see DOSAGE AND ADMINISTRATION), then quinidine sulfate should be discontinued.",
"Description": "Quinidine is an antimalarial schizonticide and an antiarrhythmic agent with class 1A activity; it is the d-isomer of quinine, and its molecular weight is 324.43. Quinidine sulfate is the sulfate salt of quinidine; its chemical name is cinchonan-9-ol, 6’- methoxy-, (9S)-, sulfate (2:1) dihydrate; its structural formula is. Its molecular formula is: C40H48N4O4∙H2SO4∙2H2O; and its molecular weight is 782.96, of which 82.9% is quinidine base. Quinidine sulfate occurs as fine needle-like, white crystals, frequently cohering in masses, or fine, white powder. It is odorless, has a very bitter taste, and darkens on exposure to light. It is slightly soluble in water, soluble in alcohol and in chloroform, and insoluble in ether. Each tablet, for oral administration, contains 200 mg of quinidine sulfate (equivalent to 166 mg of quinidine base) 300 mg of quinidine sulfate (equivalent to 249 mg of quinidine base). In addition, each tablet contains the following inactive ingredients: confectioner’s sugar, corn starch, microcrystalline cellulose, pregelatinized starch and zinc stearate."
},
{
"NDCCode": "42806-513-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (42806-513-30) ",
"NDC11Code": "42806-0513-30",
"ProductNDC": "42806-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinidine Sulfate",
"NonProprietaryName": "Quinidine Sulfate Tablet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088072",
"LabelerName": "EPIC PHARMA, LLC",
"SubstanceName": "QUINIDINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 2D6 Inhibitor [EPC], Cytochrome P450 2D6 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220102",
"SamplePackage": "N",
"IndicationAndUsage": "In patients with symptomatic atrial fibrillation/flutter whose symptoms are not adequately controlled by measures that reduce the rate of ventricular response, quinidine sulfate is indicated as a means of restoring normal sinus rhythm. If this use of quinidine sulfate does not restore sinus rhythm within a reasonable time (see DOSAGE AND ADMINISTRATION), then quinidine sulfate should be discontinued.",
"Description": "Quinidine is an antimalarial schizonticide and an antiarrhythmic agent with class 1A activity; it is the d-isomer of quinine, and its molecular weight is 324.43. Quinidine sulfate is the sulfate salt of quinidine; its chemical name is cinchonan-9-ol, 6’- methoxy-, (9S)-, sulfate (2:1) dihydrate; its structural formula is. Its molecular formula is: C40H48N4O4∙H2SO4∙2H2O; and its molecular weight is 782.96, of which 82.9% is quinidine base. Quinidine sulfate occurs as fine needle-like, white crystals, frequently cohering in masses, or fine, white powder. It is odorless, has a very bitter taste, and darkens on exposure to light. It is slightly soluble in water, soluble in alcohol and in chloroform, and insoluble in ether. Each tablet, for oral administration, contains 200 mg of quinidine sulfate (equivalent to 166 mg of quinidine base) 300 mg of quinidine sulfate (equivalent to 249 mg of quinidine base). In addition, each tablet contains the following inactive ingredients: confectioner’s sugar, corn starch, microcrystalline cellulose, pregelatinized starch and zinc stearate."
},
{
"NDCCode": "43547-513-09",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (43547-513-09) ",
"NDC11Code": "43547-0513-09",
"ProductNDC": "43547-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207883",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for: : 1 Management of neuropathic pain associated with diabetic peripheral neuropathy , 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia , 5 Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with corn starch, lactose monohydrate, and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells (25 mg, 50 mg, 75 mg, 150 mg, and 300 mg) contain red iron oxide and the light salmon capsule shells (225 mg) contain red iron oxide and yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac."
},
{
"NDCCode": "43547-513-50",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (43547-513-50) ",
"NDC11Code": "43547-0513-50",
"ProductNDC": "43547-513",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207883",
"LabelerName": "Solco Healthcare US, LLC",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for: : 1 Management of neuropathic pain associated with diabetic peripheral neuropathy , 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia , 5 Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with corn starch, lactose monohydrate, and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells (25 mg, 50 mg, 75 mg, 150 mg, and 300 mg) contain red iron oxide and the light salmon capsule shells (225 mg) contain red iron oxide and yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac."
},
{
"NDCCode": "50090-7718-0",
"PackageDescription": "24 KIT in 1 CASE (50090-7718-0) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) ",
"NDC11Code": "50090-7718-00",
"ProductNDC": "50090-7718",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simlandi",
"NonProprietaryName": "Adalimumab-ryvk",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761299",
"LabelerName": "A-S Medication Solutions",
"Status": "Active",
"LastUpdate": "2025-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251016",
"SamplePackage": "N",
"IndicationAndUsage": "SIMLANDI is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA): Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA. (1.1) , 2 Juvenile Idiopathic Arthritis (JIA): Reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older. (1.2) , 3 Psoriatic Arthritis (PsA): Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA. (1.3) , 4 Ankylosing Spondylitis (AS): Reducing signs and symptoms in adult patients with active AS. (1.4) , 5 Crohn’s Disease (CD): Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5) , 6 Ulcerative Colitis (UC): Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Plaque Psoriasis (Ps): Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7) , 8 Hidradenitis Suppurativa (HS): treatment of moderate to severe hidradenitis suppurativa in adult patients (1.8) , 9 Uveitis (UV): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients (1.9) .",
"Description": "Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. SIMLANDI® (adalimumab-ryvk) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SIMLANDI autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of SIMLANDI is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of SIMLANDI contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of SIMLANDI contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of SIMLANDI contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH."
},
{
"NDCCode": "51759-360-17",
"PackageDescription": "1 KIT in 1 CARTON (51759-360-17) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) ",
"NDC11Code": "51759-0360-17",
"ProductNDC": "51759-360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adalimumab-ryvk",
"NonProprietaryName": "Adalimumab-ryvk",
"DosageFormName": "KIT",
"StartMarketingDate": "20250228",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761299",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2025-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250228",
"SamplePackage": "N",
"IndicationAndUsage": "Adalimumab-ryvk is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA): Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA. (1.1) , 2 Juvenile Idiopathic Arthritis (JIA): Reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older. (1.2) , 3 Psoriatic Arthritis (PsA): Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA. (1.3) , 4 Ankylosing Spondylitis (AS): Reducing signs and symptoms in adult patients with active AS. (1.4) , 5 Crohn’s Disease (CD): Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5) , 6 Ulcerative Colitis (UC): Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Plaque Psoriasis (Ps): Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7) , 8 Hidradenitis Suppurativa (HS): treatment of moderate to severe hidradenitis suppurativa in adult patients (1.8) , 9 Uveitis (UV): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients (1.9) .",
"Description": "Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. Adalimumab-ryvk injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled Adalimumab-ryvk autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of Adalimumab-ryvk is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of Adalimumab-ryvk contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of Adalimumab-ryvk contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of Adalimumab-ryvk contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH."
},
{
"NDCCode": "51759-402-02",
"PackageDescription": "2 KIT in 1 CARTON (51759-402-02) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) ",
"NDC11Code": "51759-0402-02",
"ProductNDC": "51759-402",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simlandi",
"NonProprietaryName": "Adalimumab-ryvk",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761299",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240520",
"SamplePackage": "N",
"IndicationAndUsage": "SIMLANDI is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older (1.9).",
"Description": "Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. SIMLANDI® (adalimumab-ryvk) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SIMLANDI autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of SIMLANDI is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of SIMLANDI contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of SIMLANDI contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of SIMLANDI contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH."
},
{
"NDCCode": "51759-402-17",
"PackageDescription": "1 KIT in 1 CARTON (51759-402-17) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) ",
"NDC11Code": "51759-0402-17",
"ProductNDC": "51759-402",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simlandi",
"NonProprietaryName": "Adalimumab-ryvk",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240520",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761299",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240520",
"SamplePackage": "N",
"IndicationAndUsage": "SIMLANDI is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older (1.9).",
"Description": "Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. SIMLANDI® (adalimumab-ryvk) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SIMLANDI autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of SIMLANDI is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of SIMLANDI contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of SIMLANDI contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of SIMLANDI contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH."
},
{
"NDCCode": "57664-663-83",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-663-83) ",
"NDC11Code": "57664-0663-83",
"ProductNDC": "57664-663",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20171108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090132",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171108",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide."
},
{
"NDCCode": "57664-664-83",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-664-83) ",
"NDC11Code": "57664-0664-83",
"ProductNDC": "57664-664",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20171108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090132",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171108",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide."
},
{
"NDCCode": "57664-665-83",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-665-83) ",
"NDC11Code": "57664-0665-83",
"ProductNDC": "57664-665",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20171108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090132",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171108",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide."
},
{
"NDCCode": "57664-666-83",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-666-83) ",
"NDC11Code": "57664-0666-83",
"ProductNDC": "57664-666",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol Phosphate",
"NonProprietaryName": "Carvedilol Phosphate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20171108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090132",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "CARVEDILOL PHOSPHATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171108",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .",
"Description": "Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide."
},
{
"NDCCode": "65585-513-01",
"PackageDescription": "50 mL in 1 BOTTLE, PUMP (65585-513-01) ",
"NDC11Code": "65585-0513-01",
"ProductNDC": "65585-513",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Whiskcare 387",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200415",
"EndMarketingDate": "20270630",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Whisk Products, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2025-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200415",
"EndMarketingDatePackage": "20270630",
"SamplePackage": "Y",
"IndicationAndUsage": "reduces amount of bacteria on hands."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>69743-513-23</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (69743-513-23) > 170 g in 1 TUBE</PackageDescription>
<NDC11Code>69743-0513-23</NDC11Code>
<ProductNDC>69743-513</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rhemu</ProprietaryName>
<NonProprietaryName>Rhemu Analgesic</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Galxee, Inc.</LabelerName>
<SubstanceName>MENTHOL; METHYL SALICYLATE</SubstanceName>
<StrengthNumber>.07; .1</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-03-21</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67877-513-23</NDCCode>
<PackageDescription>2000 TABLET, FILM COATED in 1 BOTTLE (67877-513-23) </PackageDescription>
<NDC11Code>67877-0513-23</NDC11Code>
<ProductNDC>67877-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209288</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium is indicated: 1 To reduce the risk of:.</IndicationAndUsage>
<Description>Atorvastatin calcium is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole- 1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is (C33H34FN2O5)2Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium, USP is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium, USP is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg or 80 mg of atorvastatin, USP and the following inactive ingredients: Calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80. The coating material contains hypromellose, polyethylene glycol, talc, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0143-9161-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9161-10) / 513 mg in 1 VIAL (0143-9161-01) </PackageDescription>
<NDC11Code>00143-9161-10</NDC11Code>
<ProductNDC>0143-9161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20230202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>513</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9161-25</NDCCode>
<PackageDescription>25 VIAL in 1 PACKAGE (0143-9161-25) / 513 mg in 1 VIAL (0143-9161-01) </PackageDescription>
<NDC11Code>00143-9161-25</NDC11Code>
<ProductNDC>0143-9161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20230202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>513</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9162-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9162-10) / 1025 mg in 1 VIAL (0143-9162-01) </PackageDescription>
<NDC11Code>00143-9162-10</NDC11Code>
<ProductNDC>0143-9162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20230202</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1025</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9473-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9473-10) / 769 mg in 1 VIAL (0143-9473-01) </PackageDescription>
<NDC11Code>00143-9473-10</NDC11Code>
<ProductNDC>0143-9473</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20250813</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>769</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250813</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9474-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9474-10) / 1280 mg in 1 VIAL (0143-9474-01) </PackageDescription>
<NDC11Code>00143-9474-10</NDC11Code>
<ProductNDC>0143-9474</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20250813</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1280</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250813</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0143-9475-10</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (0143-9475-10) / 1540 mg in 1 VIAL (0143-9475-01) </PackageDescription>
<NDC11Code>00143-9475-10</NDC11Code>
<ProductNDC>0143-9475</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20250813</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>HIKMA PHARMACEUTICALS USA INC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1540</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250813</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S,26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[l,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 g, 1.25 g or 1.5 g vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 g vial contains 1 g vancomycin (equivalent to 1.025 g vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 g vial contains 1.25 g vancomycin (equivalent to 1.28 g vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 g vial contains 1.5 g vancomycin (equivalent to 1.54 g vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>0338-0122-04</NDCCode>
<PackageDescription>250 mL in 1 BAG (0338-0122-04) </PackageDescription>
<NDC11Code>00338-0122-04</NDC11Code>
<ProductNDC>0338-0122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/250mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-0124-04</NDCCode>
<PackageDescription>300 mL in 1 BAG (0338-0124-04) </PackageDescription>
<NDC11Code>00338-0124-04</NDC11Code>
<ProductNDC>0338-0124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/300mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3551-48</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-3551-48) </PackageDescription>
<NDC11Code>00338-3551-48</NDC11Code>
<ProductNDC>0338-3551</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3552-48</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3552-48) </PackageDescription>
<NDC11Code>00338-3552-48</NDC11Code>
<ProductNDC>0338-3552</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/200mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3580-48</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3580-48) </PackageDescription>
<NDC11Code>00338-3580-48</NDC11Code>
<ProductNDC>0338-3580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19581114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3581-01</NDCCode>
<PackageDescription>100 mL in 1 BAG (0338-3581-01) </PackageDescription>
<NDC11Code>00338-3581-01</NDC11Code>
<ProductNDC>0338-3581</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3582-01</NDCCode>
<PackageDescription>150 mL in 1 BAG (0338-3582-01) </PackageDescription>
<NDC11Code>00338-3582-01</NDC11Code>
<ProductNDC>0338-3582</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>0338-3583-01</NDCCode>
<PackageDescription>200 mL in 1 BAG (0338-3583-01) </PackageDescription>
<NDC11Code>00338-3583-01</NDC11Code>
<ProductNDC>0338-3583</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19581114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050671</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/200mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Injection is a glycopeptide antibacterial indicated for the treatment of the following infections in adult and pediatric patients for whom appropriate dosing with this formulation can be achieved: 1 Septicemia (1.1), 2 Infective Endocarditis (1.2), 3 Skin and Skin Structure Infections (1.3), 4 Bone Infections (1.4), 5 Lower Respiratory Tract Infections (1.5).</IndicationAndUsage>
<Description>Vancomycin Injection USP, in the GALAXY plastic container contains vancomycin, added as Vancomycin Hydrochloride USP. It is a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name of vancomycin hydrochloride is (Sa)-(3S, 6R, 7R, 22R, 23S, 26S, 36R, 38aR)-44-[[2-O-(3-Amino-2, 3, 6-trideoxy-3-Cmethyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)- 10,19dichloro 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6[(2R)-4-methyl-2-(methylamino) valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno23, 36-(iminomethano)-13, 16:31, 35-dimetheno-1H, 16H-[l, 6, 9] oxadiazacyclohexadecino [4, 5-m] [10, 2, 16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24·HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula. Vancomycin Injection, USP in the GALAXY container is a frozen, iso-osmotic, sterile, nonpyrogenic, premixed single-dose formulation. The composition of Vancomycin Injection, USP, available in the following strengths are: 1 500 mg/100 mL (5 mg/mL): containing 500 mg of vancomycin (equivalent to 513 mg of vancomycin hydrochloride); approximately 5 g of dextrose hydrous or 0.9 g of sodium chloride (equivalent to 354 mg total sodium content), 2 750 mg/150 mL (5 mg/mL): containing 750 mg of vancomycin (equivalent to 769 mg of vancomycin hydrochloride); approximately 7.5 g of dextrose hydrous or 1.35 g of sodium chloride (equivalent to 531 mg total sodium content), 3 1 g/200 mL (5 mg/mL): containing 1 g of vancomycin (equivalent to 1.025 g of vancomycin hydrochloride); approximately 10 g of dextrose hydrous or 1.8 g of sodium chloride (equivalent to 708 mg total sodium content), 4 1.25 g/250 mL (5 mg/mL): containing 1.25 g of vancomycin (equivalent to 1.281 g of vancomycin hydrochloride); approximately 12.5 g of dextrose hydrous., 5 1.5 g/300 mL (5 mg/mL): containing 1.5 g of vancomycin (equivalent to 1.538 g of vancomycin hydrochloride); approximately 15 g of dextrose hydrous.</Description>
</NDC>
<NDC>
<NDCCode>42291-513-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (42291-513-60) </PackageDescription>
<NDC11Code>42291-0513-60</NDC11Code>
<ProductNDC>42291-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pioglitazone And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Pioglitazone And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091155</ApplicationNumber>
<LabelerName>AvKARE, Inc.</LabelerName>
<SubstanceName>PIOGLITAZONE HYDROCHLORIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15; 850</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [CS],PPAR gamma [CS],Thiazolidinedione [EPC],Thiazolidinediones [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC],Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42806-513-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (42806-513-01) </PackageDescription>
<NDC11Code>42806-0513-01</NDC11Code>
<ProductNDC>42806-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinidine Sulfate</ProprietaryName>
<NonProprietaryName>Quinidine Sulfate Tablet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088072</ApplicationNumber>
<LabelerName>EPIC PHARMA, LLC</LabelerName>
<SubstanceName>QUINIDINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 2D6 Inhibitor [EPC], Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>In patients with symptomatic atrial fibrillation/flutter whose symptoms are not adequately controlled by measures that reduce the rate of ventricular response, quinidine sulfate is indicated as a means of restoring normal sinus rhythm. If this use of quinidine sulfate does not restore sinus rhythm within a reasonable time (see DOSAGE AND ADMINISTRATION), then quinidine sulfate should be discontinued.</IndicationAndUsage>
<Description>Quinidine is an antimalarial schizonticide and an antiarrhythmic agent with class 1A activity; it is the d-isomer of quinine, and its molecular weight is 324.43. Quinidine sulfate is the sulfate salt of quinidine; its chemical name is cinchonan-9-ol, 6’- methoxy-, (9S)-, sulfate (2:1) dihydrate; its structural formula is. Its molecular formula is: C40H48N4O4∙H2SO4∙2H2O; and its molecular weight is 782.96, of which 82.9% is quinidine base. Quinidine sulfate occurs as fine needle-like, white crystals, frequently cohering in masses, or fine, white powder. It is odorless, has a very bitter taste, and darkens on exposure to light. It is slightly soluble in water, soluble in alcohol and in chloroform, and insoluble in ether. Each tablet, for oral administration, contains 200 mg of quinidine sulfate (equivalent to 166 mg of quinidine base) 300 mg of quinidine sulfate (equivalent to 249 mg of quinidine base). In addition, each tablet contains the following inactive ingredients: confectioner’s sugar, corn starch, microcrystalline cellulose, pregelatinized starch and zinc stearate.</Description>
</NDC>
<NDC>
<NDCCode>42806-513-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (42806-513-30) </PackageDescription>
<NDC11Code>42806-0513-30</NDC11Code>
<ProductNDC>42806-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinidine Sulfate</ProprietaryName>
<NonProprietaryName>Quinidine Sulfate Tablet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088072</ApplicationNumber>
<LabelerName>EPIC PHARMA, LLC</LabelerName>
<SubstanceName>QUINIDINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 2D6 Inhibitor [EPC], Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>In patients with symptomatic atrial fibrillation/flutter whose symptoms are not adequately controlled by measures that reduce the rate of ventricular response, quinidine sulfate is indicated as a means of restoring normal sinus rhythm. If this use of quinidine sulfate does not restore sinus rhythm within a reasonable time (see DOSAGE AND ADMINISTRATION), then quinidine sulfate should be discontinued.</IndicationAndUsage>
<Description>Quinidine is an antimalarial schizonticide and an antiarrhythmic agent with class 1A activity; it is the d-isomer of quinine, and its molecular weight is 324.43. Quinidine sulfate is the sulfate salt of quinidine; its chemical name is cinchonan-9-ol, 6’- methoxy-, (9S)-, sulfate (2:1) dihydrate; its structural formula is. Its molecular formula is: C40H48N4O4∙H2SO4∙2H2O; and its molecular weight is 782.96, of which 82.9% is quinidine base. Quinidine sulfate occurs as fine needle-like, white crystals, frequently cohering in masses, or fine, white powder. It is odorless, has a very bitter taste, and darkens on exposure to light. It is slightly soluble in water, soluble in alcohol and in chloroform, and insoluble in ether. Each tablet, for oral administration, contains 200 mg of quinidine sulfate (equivalent to 166 mg of quinidine base) 300 mg of quinidine sulfate (equivalent to 249 mg of quinidine base). In addition, each tablet contains the following inactive ingredients: confectioner’s sugar, corn starch, microcrystalline cellulose, pregelatinized starch and zinc stearate.</Description>
</NDC>
<NDC>
<NDCCode>43547-513-09</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (43547-513-09) </PackageDescription>
<NDC11Code>43547-0513-09</NDC11Code>
<ProductNDC>43547-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207883</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for: : 1 Management of neuropathic pain associated with diabetic peripheral neuropathy , 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia , 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with corn starch, lactose monohydrate, and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells (25 mg, 50 mg, 75 mg, 150 mg, and 300 mg) contain red iron oxide and the light salmon capsule shells (225 mg) contain red iron oxide and yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>43547-513-50</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (43547-513-50) </PackageDescription>
<NDC11Code>43547-0513-50</NDC11Code>
<ProductNDC>43547-513</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207883</ApplicationNumber>
<LabelerName>Solco Healthcare US, LLC</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for: : 1 Management of neuropathic pain associated with diabetic peripheral neuropathy , 2 Management of postherpetic neuralgia, 3 Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older, 4 Management of fibromyalgia , 5 Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with corn starch, lactose monohydrate, and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells (25 mg, 50 mg, 75 mg, 150 mg, and 300 mg) contain red iron oxide and the light salmon capsule shells (225 mg) contain red iron oxide and yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>50090-7718-0</NDCCode>
<PackageDescription>24 KIT in 1 CASE (50090-7718-0) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) </PackageDescription>
<NDC11Code>50090-7718-00</NDC11Code>
<ProductNDC>50090-7718</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simlandi</ProprietaryName>
<NonProprietaryName>Adalimumab-ryvk</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761299</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SIMLANDI is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA): Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA. (1.1) , 2 Juvenile Idiopathic Arthritis (JIA): Reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older. (1.2) , 3 Psoriatic Arthritis (PsA): Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA. (1.3) , 4 Ankylosing Spondylitis (AS): Reducing signs and symptoms in adult patients with active AS. (1.4) , 5 Crohn’s Disease (CD): Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5) , 6 Ulcerative Colitis (UC): Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Plaque Psoriasis (Ps): Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7) , 8 Hidradenitis Suppurativa (HS): treatment of moderate to severe hidradenitis suppurativa in adult patients (1.8) , 9 Uveitis (UV): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients (1.9) .</IndicationAndUsage>
<Description>Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. SIMLANDI® (adalimumab-ryvk) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SIMLANDI autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of SIMLANDI is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of SIMLANDI contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of SIMLANDI contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of SIMLANDI contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>51759-360-17</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (51759-360-17) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) </PackageDescription>
<NDC11Code>51759-0360-17</NDC11Code>
<ProductNDC>51759-360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adalimumab-ryvk</ProprietaryName>
<NonProprietaryName>Adalimumab-ryvk</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250228</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761299</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adalimumab-ryvk is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA): Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA. (1.1) , 2 Juvenile Idiopathic Arthritis (JIA): Reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older. (1.2) , 3 Psoriatic Arthritis (PsA): Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA. (1.3) , 4 Ankylosing Spondylitis (AS): Reducing signs and symptoms in adult patients with active AS. (1.4) , 5 Crohn’s Disease (CD): Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5) , 6 Ulcerative Colitis (UC): Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Plaque Psoriasis (Ps): Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7) , 8 Hidradenitis Suppurativa (HS): treatment of moderate to severe hidradenitis suppurativa in adult patients (1.8) , 9 Uveitis (UV): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients (1.9) .</IndicationAndUsage>
<Description>Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. Adalimumab-ryvk injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled Adalimumab-ryvk autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of Adalimumab-ryvk is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of Adalimumab-ryvk contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of Adalimumab-ryvk contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of Adalimumab-ryvk contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>51759-402-02</NDCCode>
<PackageDescription>2 KIT in 1 CARTON (51759-402-02) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) </PackageDescription>
<NDC11Code>51759-0402-02</NDC11Code>
<ProductNDC>51759-402</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simlandi</ProprietaryName>
<NonProprietaryName>Adalimumab-ryvk</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761299</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SIMLANDI is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older (1.9).</IndicationAndUsage>
<Description>Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. SIMLANDI® (adalimumab-ryvk) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SIMLANDI autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of SIMLANDI is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of SIMLANDI contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of SIMLANDI contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of SIMLANDI contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>51759-402-17</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (51759-402-17) / 1 KIT in 1 KIT * 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE (51759-513-21) * .4 mL in 1 POUCH (65517-0002-1) </PackageDescription>
<NDC11Code>51759-0402-17</NDC11Code>
<ProductNDC>51759-402</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simlandi</ProprietaryName>
<NonProprietaryName>Adalimumab-ryvk</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240520</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761299</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SIMLANDI is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6) Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older (1.9).</IndicationAndUsage>
<Description>Adalimumab-ryvk is a tumor necrosis factor blocker. Adalimumab-ryvk is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-ryvk is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. SIMLANDI® (adalimumab-ryvk) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SIMLANDI autoinjector or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of SIMLANDI is clear and colorless, with a pH of 5.0-5.6. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of SIMLANDI contains adalimumab-ryvk (80 mg), polysorbate 80 (0.80 mg), sodium chloride (0.47 mg), sucrose (69.83 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of SIMLANDI contains adalimumab-ryvk (40 mg), polysorbate 80 (0.40 mg), sodium chloride (0.23 mg), sucrose (34.9 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of SIMLANDI contains adalimumab-ryvk (20 mg), polysorbate 80 (0.20 mg), sodium chloride (0.12 mg), sucrose (17.46 mg), and Water for Injection, USP. Sodium hydroxide and hydrochloric acid are added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>57664-663-83</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-663-83) </PackageDescription>
<NDC11Code>57664-0663-83</NDC11Code>
<ProductNDC>57664-663</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090132</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>57664-664-83</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-664-83) </PackageDescription>
<NDC11Code>57664-0664-83</NDC11Code>
<ProductNDC>57664-664</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090132</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>57664-665-83</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-665-83) </PackageDescription>
<NDC11Code>57664-0665-83</NDC11Code>
<ProductNDC>57664-665</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090132</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>57664-666-83</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (57664-666-83) </PackageDescription>
<NDC11Code>57664-0666-83</NDC11Code>
<ProductNDC>57664-666</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol Phosphate</ProprietaryName>
<NonProprietaryName>Carvedilol Phosphate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090132</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>CARVEDILOL PHOSPHATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol phosphate extended-release capsules are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure. ( 1.1) , 2 left ventricular dysfunction following myocardial infarction in clinically stable patients. ( 1.2) , 3 hypertension ( 1.3) .</IndicationAndUsage>
<Description>Carvedilol phosphate is a nonselective beta-adrenergic blocking agent with alpha 1-blocking activity. It is (2 RS)-1-(9 H-Carbazol-4-yloxy)-3-[[2-(2-methoxyphenoxy)ethyl]amino]propan-2-ol phosphate salt (1:1) hemihydrate. It is a racemic mixture with the following structure:. Carvedilol phosphate is a white to almost-white solid with a molecular weight of 513.5 (406.5 carvedilol free base) and a molecular formula of C 24H 26N 2O 4H 3PO 41/2 H 2O. Carvedilol phosphate extended-release capsules are available for once-a-day administration as controlled-release oral capsules containing 10, 20, 40, or 80 mg carvedilol phosphate. Carvedilol phosphate extended-release hard gelatin capsules are filled with carvedilol phosphate controlled-release minitablets that are coated with methacrylic acid copolymers. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid ethyl acrylate, methacrylic acid methyl methacrylate, microcrystalline cellulose, polyethylene glycol, propylene glycol, silicon dioxide, talc and triethyl citrate. The capsule shell contains gelatin and titanium dioxide. The 20 mg capsule shell also contains FD&C blue #1, FD&C yellow #5 and FD&C yellow #6. The 40 mg capsule shell also contains D&C yellow #10 and FD&C yellow #6. The 80 mg capsule shell also contains D&C yellow #10 and FD&C blue #1. The imprinting ink for the 10 mg, 40 mg and 80 mg contains D&C yellow #10 lake, FD&C blue #1, FD&C blue #2, FD&C red #40, iron oxide black, propylene glycol and shellac glaze. The imprinting ink for the 20 mg contains ammonium hydroxide, propylene glycol, shellac glaze, simethicone and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65585-513-01</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, PUMP (65585-513-01) </PackageDescription>
<NDC11Code>65585-0513-01</NDC11Code>
<ProductNDC>65585-513</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Whiskcare 387</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200415</StartMarketingDate>
<EndMarketingDate>20270630</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Whisk Products, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200415</StartMarketingDatePackage>
<EndMarketingDatePackage>20270630</EndMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>reduces amount of bacteria on hands.</IndicationAndUsage>
</NDC>
</NDCList>