{
"NDC": [
{
"NDCCode": "70069-864-10",
"PackageDescription": "10 POUCH in 1 CASE (70069-864-10) / 1 BAG in 1 POUCH (70069-864-01) / 250 mL in 1 BAG",
"NDC11Code": "70069-0864-10",
"ProductNDC": "70069-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Foscarnet Sodium",
"NonProprietaryName": "Foscarnet Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220068",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "FOSCARNET SODIUM",
"StrengthNumber": "24",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Chelating Activity [MoA], DNA Polymerase Inhibitors [MoA], Pyrophosphate Analog DNA Polymerase Inhibitor [EPC], Pyrophosphate Analog [EXT]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260925",
"SamplePackage": "N",
"IndicationAndUsage": "CMV Retinitis. Foscarnet sodium injection is indicated for the treatment of CMV retinitis in patients with acquired immunodeficiency syndrome (AIDS). Combination therapy with foscarnet sodium injection and ganciclovir is indicated for patients who have relapsed after monotherapy with either drug. SAFETY AND EFFICACY OF FOSCARNET SODIUM INJECTION HAVE NOT BEEN ESTABLISHED FOR TREATMENT OF OTHER CMV INFECTIONS (e.g., PNEUMONITIS, GASTROENTERITIS); CONGENITAL OR NEONATAL CMV DISEASE; OR NONIMMUNOCOMPROMISED INDIVIDUALS. Mucocutaneous Acyclovir Resistant HSV Infections. Foscarnet sodium injection is indicated for the treatment of acyclovir-resistant mucocutaneous HSV infections in immunocompromised patients. SAFETY AND EFFICACY OF FOSCARNET SODIUM INJECTION HAVE NOT BEEN ESTABLISHED FOR TREATMENT OF OTHER HSV INFECTIONS (e.g., RETINITIS, ENCEPHALITIS); CONGENITAL OR NEONATAL HSV DISEASE; OR HSV IN NONIMMUNOCOMPROMISED INDIVIDUALS.",
"Description": "The chemical name of foscarnet sodium is phosphonoformic acid, trisodium salt. Foscarnet sodium is a white, crystalline powder containing 6 equivalents of water of hydration with an empirical formula of Na3CO5P6H2O and a molecular weight of 300.1. The structural formula. Foscarnet sodium injection has the potential to chelate divalent metal ions, such as calcium and magnesium, to form stable coordination compounds. Foscarnet sodium injection is a sterile, isotonic aqueous solution for intravenous administration only. The solution is clear and colorless. Each milliliter of foscarnet sodium injection contains 24 mg of foscarnet sodium hexahydrate in Water for Injection, USP. Hydrochloric acid may have been added to adjust the pH of the solution to 7.4. Foscarnet sodium injection contains no preservatives. VIROLOGY. Mechanism of Action. Foscarnet exerts its antiviral activity by a selective inhibition at the pyrophosphate binding site on virus-specific DNA polymerases at concentrations that do not affect cellular DNA polymerases. Foscarnet does not require activation (phosphorylation) by thymidine kinase or other kinases. Antiviral Activity in Cell Culture. The quantitative relationship between the cell culture susceptibility of human cytomegalovirus (CMV) or herpes simplex virus 1 and 2 (HSV-1 and HSV-2) to foscarnet and clinical response to therapy has not been established and virus sensitivity testing has not been standardized. Sensitivity test results, expressed as the concentration of drug required to inhibit by 50% the growth of virus in cell culture (EC50), vary greatly depending on the assay method used, cell type employed and the laboratory performing the test. A number of sensitive viruses and their EC50 values are listed below (Table 1). The combination antiviral activity of foscarnet and ganciclovir or acyclovir are not antagonistic in cell culture. TABLE 1 Foscarnet Inhibition of Virus Replication in Cell Culture. *Mean = 269 μM. Antiviral Activity in vivo. Statistically significant decreases in positive CMV cultures from blood and urine have been demonstrated in two studies (FOS-03 and ACTG-015/915) of subjects treated with foscarnet sodium injection. Although median time to progression of CMV retinitis was increased in subjects treated with foscarnet sodium injection, reductions in positive blood or urine cultures have not been shown to correlate with clinical efficacy in individual subjects (Table 2). TABLE 2. Blood and Urine Culture Results from CMV Retinitis Patients*. *A total of 77 subjects were treated with foscarnet sodium injection in two clinical trials (FOS-03 and ACTG-015/915). Not all subjects had blood or urine cultures done and some subjects had results from both cultures. † (60 mg/kg foscarnet sodium injection TID for 2–3 weeks). Resistance. Cell culture: CMV and HSV isolates with reduced susceptibility to foscarnet have been selected in cell culture by passage of wild type virus in the presence of increasing concentrations of the drug. All foscarnet resistant isolates are known to be generated through amino acid substitutions in the viral DNA polymerase pUL54 (CMV) or pUL30 (HSV) (Table 3). TABLE 3. Summary of Foscarnet Resistance-associated DNA Polymerase Amino Acid Substitutions in Cell Culture. In vivo: Limited clinical data are available on the development of clinical resistance to foscarnet and many pathways to resistance likely exist. Substitutions documented in the literature in treated patients as associated with foscarnet resistance, are listed in Table 4. TABLE 4 Summary of Foscarnet Resistance-associated Amino Acid Substitutions Observed in Treated Patients. Note: Many additional pathways to foscarnet resistance likely exist. The possibility of viral resistance should be considered in patients who show poor clinical response or experience persistent viral excretion during therapy. Cross-Resistance: The amino acid substitutions that resulted in reduced susceptibility to foscarnet and either ganciclovir, acyclovir and/or cidofovir are summarized in Tables 5 and 6. TABLE 5 Summary of CMV DNA polymerase Amino Acid Substitutions Conferring Foscarnet Resistance with Cross-Resistance to Ganciclovir and/or Cidofovir. TABLE 6 Summary of HSV DNA polymerase Amino Acid Substitutions Conferring Foscarnet Resistance with Cross-Resistance to Acyclovir and/or Cidofovir."
},
{
"NDCCode": "21130-864-15",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (21130-864-15) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "21130-0864-15",
"ProductNDC": "21130-864",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gas Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20150301",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part332",
"LabelerName": "Better Living Brands, LLC",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Skin Barrier Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150301",
"SamplePackage": "N"
},
{
"NDCCode": "43469-864-10",
"PackageDescription": "10 PATCH in 1 CARTON (43469-864-10)",
"NDC11Code": "43469-0864-10",
"ProductNDC": "43469-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Synera",
"NonProprietaryName": "Lidocaine And Tetracaine",
"DosageFormName": "PATCH",
"RouteName": "CUTANEOUS",
"StartMarketingDate": "20050623",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021623",
"LabelerName": "ZARS Pharma, Inc.",
"SubstanceName": "LIDOCAINE; TETRACAINE",
"StrengthNumber": "70; 70",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE],Ester Local Anesthetic [EPC],Esters [Chemical/Ingredient],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2017-09-01"
},
{
"NDCCode": "50458-864-02",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (50458-864-02) > 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "50458-0864-02",
"ProductNDC": "50458-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nucynta",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110825",
"EndMarketingDate": "20200331",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200533",
"LabelerName": "Janssen Pharmaceuticals, Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2020-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20110825",
"EndMarketingDatePackage": "20200331",
"SamplePackage": "N"
},
{
"NDCCode": "54458-864-10",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (54458-864-10)",
"NDC11Code": "54458-0864-10",
"ProductNDC": "54458-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pioglitazone",
"NonProprietaryName": "Pioglitazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077210",
"LabelerName": "International Laboratories, LLC",
"SubstanceName": "PIOGLITAZONE HYDROCHLORIDE",
"StrengthNumber": "45",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [CS],PPAR gamma [CS],Thiazolidinedione [EPC],Thiazolidinediones [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Monotherapy and Combination Therapy. Pioglitazone tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus in multiple clinical settings [see Clinical Studies (14)]. Important Limitations of Use. Pioglitazone tablets exert their antihyperglycemic effect only in the presence of endogenous insulin. Pioglitazone tablets should not be used to treat type 1 diabetes or diabetic ketoacidosis, as it would not be effective in these settings. Use caution in patients with liver disease [see Warnings and Precautions (5.3)].",
"Description": "Pioglitazone hydrochloride tablets USP are a thiazolidinedione and an agonist for peroxisome proliferator-activated receptor (PPAR) gamma that contains an oral antidiabetic medication: pioglitazone. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl)ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. C19H20N2O3SHCl M.W. 392.90. Pioglitazone hydrochloride, USP is an odorless white crystalline powder. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Pioglitazone tablets USP are available for oral administration containing 15 mg, 30 mg, or 45 mg of pioglitazone (as the base) formulated with the following excipients: carboxymethylcellulose calcium, hydroxypropyl cellulose, magnesium stearate, and mannitol."
},
{
"NDCCode": "59779-864-10",
"PackageDescription": "1 KIT in 1 KIT (59779-864-10) * 10 PACKET in 1 KIT > 3000 mg in 1 PACKET (59779-408-01) * 1 CARTON in 1 KIT > 1 in 1 CARTON (GS1:307073877636)",
"NDC11Code": "59779-0864-10",
"ProductNDC": "59779-864",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cvs",
"NonProprietaryName": "Sodium Chloride, Sodium Bicarbonate",
"DosageFormName": "KIT",
"StartMarketingDate": "20160325",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "CVS Pharmacy",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Uses. Temporarily relieves symptoms associated with. sinusitis, cold, flu or allergies. -Sneezing. -Runny nose. -Nasal stuffiness. -Post nasal drip. -Removes inhaled irritants (dust, pollen). -Promotes nasal and sinus drainage. -Helps reduce swelling of nasal membranes. -Moisturizes dry nasal passages."
},
{
"NDCCode": "60429-864-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (60429-864-10) ",
"NDC11Code": "60429-0864-10",
"ProductNDC": "60429-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076958",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170309",
"SamplePackage": "N"
},
{
"NDCCode": "61619-864-10",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (61619-864-10) > 29.6 mL in 1 BOTTLE, PLASTIC (61619-864-06) ",
"NDC11Code": "61619-0864-10",
"ProductNDC": "61619-864",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pro-tect Sports Sunscreen Spf 20",
"NonProprietaryName": "Meradimate, Octinoxate, Octisalate, Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "CUTANEOUS",
"StartMarketingDate": "20160205",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "A-Cute Derm, Incorporated",
"SubstanceName": "MERADIMATE; OCTINOXATE; OCTISALATE; OXYBENZONE",
"StrengthNumber": "50; 75; 50; 30",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20211222",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "62037-864-20",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (62037-864-20) > 1 SYRINGE in 1 BLISTER PACK > .8 mL in 1 SYRINGE",
"NDC11Code": "62037-0864-20",
"ProductNDC": "62037-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20120213",
"EndMarketingDate": "20180630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076684",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "120",
"StrengthUnit": "mg/.8mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [Chemical/Ingredient],Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120213",
"EndMarketingDatePackage": "20180630",
"SamplePackage": "N"
},
{
"NDCCode": "62257-864-10",
"PackageDescription": "1000 mL in 1 CARTRIDGE (62257-864-10) ",
"NDC11Code": "62257-0864-10",
"ProductNDC": "62257-864",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Palm",
"NonProprietaryName": "Chloroxylenol",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160819",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "ABC Compounding Co., Inc.",
"SubstanceName": "CHLOROXYLENOL",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2022-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20160819",
"SamplePackage": "N"
},
{
"NDCCode": "63304-864-69",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (63304-864-69)",
"NDC11Code": "63304-0864-69",
"ProductNDC": "63304-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Febuxostat",
"NonProprietaryName": "Febuxostat",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205392",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "FEBUXOSTAT",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63868-864-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (63868-864-20) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "63868-0864-20",
"ProductNDC": "63868-864",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Daytime Cold And Flu",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide, Phenylephrine Hydrochloride",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20170308",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Chain Drug Marketing Association Inc.",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170308",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to a cold or flu:."
},
{
"NDCCode": "67777-006-10",
"PackageDescription": "864 BOX in 1 CASE (67777-006-10) / 144 PACKET in 1 BOX (67777-006-09) / 5 g in 1 PACKET",
"NDC11Code": "67777-0006-10",
"ProductNDC": "67777-006",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vitamins A And D Without Lanolin",
"NonProprietaryName": "Skin Protectant",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170404",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Dynarex Corporation",
"SubstanceName": "PETROLATUM",
"StrengthNumber": "93",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2024-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170404",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily protects minor cuts, scrapes,burns. Temporarily protects and helps relieve chafed, chapped, or cracked skin and lips. Helps prevent and protect from the drying effects of wind and cold weather."
},
{
"NDCCode": "68382-864-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-864-77) / 10 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (68382-864-30) ",
"NDC11Code": "68382-0864-77",
"ProductNDC": "68382-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207382",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180405",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate extended-release capsules are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 6 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome (LGS) in patients 6 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3).",
"Description": "Topiramate, is a sulfamate-substituted monosaccharide. Topiramate extended-release capsules are available as 25 mg, 50 mg and 100 mg capsules for oral administration. Topiramate, USP is a white to off-white crystalline powder. Topiramate is freely soluble in dichloromethane. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.4. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate extended-release capsules contain 25 mg, 50 mg, 100 mg or 200 mg of. topiramate and contains following inactive ingredients: ethyl cellulose, hypromellose. microcrystalline cellulose, polyethylene glycol, talc and triethyl citrate. Additionally, each 25 mg, 50 mg and 100 mg capsule contain hydrogenated castor oil. and povidone and each 200 mg capsule contains hydroxypropyl cellulose. The capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide and water. The capsule is imprinted with black pharmaceutical ink and contains following. inactive ingredients: black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "68382-864-78",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (68382-864-78) / 10 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (68382-864-30) ",
"NDC11Code": "68382-0864-78",
"ProductNDC": "68382-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207382",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240910",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate extended-release capsules are indicated for: 1 Epilepsy:initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 6 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset, primary generalized tonic-clonic seizures or seizures associated with Lennox-Gastaut syndrome (LGS) in patients 6 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3).",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate extended-release capsules, USP are available as 25 mg, 50 mg, 100 mg and 200 mg capsules for oral administration. Topiramate, USP is a white to off-white crystalline powder. Topiramate is freely soluble in polar organic solvents such as acetonitrile and acetone; and very slightly soluble to practically insoluble in non-polar organic solvents such as hexanes. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate extended-release capsules, USP contain 25 mg, 50 mg ,100 mg or 200 mg of topiramate. Additionally, each capsule contains the following inactive ingredients: ethyl cellulose, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol, talc and triethyl citrate. The capsule shells contain gelatin, sodium lauryl sulfate, titanium dioxide and water. All capsule shells are imprinted with black pharmaceutical ink that contains black iron oxide, potassium hydroxide, propylene glycol and shellac. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68462-864-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (68462-864-10) ",
"NDC11Code": "68462-0864-10",
"ProductNDC": "68462-864",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorpromazine Hydrochloride",
"NonProprietaryName": "Chlorpromazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212144",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CHLORPROMAZINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2024-05-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210323",
"SamplePackage": "N",
"IndicationAndUsage": "For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.",
"Description": "Chlorpromazine hydrochloride, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. Chemical Name: C17H19ClN2S.HCl. Molecular Weight: 355.33 g/mol. Chlorpromazine hydrochloride, USP occurs as white or slightly creamy white crystalline powder. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive Ingredients:. 10 mg contains: corn starch, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The coating material opadry brown contains diethyl phthalate, D&C yellow no 10, ethylcellulose, FD&C blue no 2, FD&C yellow no 6, hypromellose, red iron oxide, talc, and titanium dioxide. 25 mg contains: corn starch, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The coating material opadry orange contains diethyl phthalate, D&C yellow no 10, ethylcellulose, FD&C yellow no 6, hypromellose, red iron oxide, talc, and titanium dioxide. 50 mg, 100 mg and 200 mg contains: corn starch, colloidal silicon dioxide, lactose monohydrate, anhydrous lactose, microcrystalline cellulose, magnesium stearate, poloxamer 188 micro, pregelatinized starch, povidone, and sodium starch glycolate. The coating material opadry brown contains diethyl phthalate, D&C yellow no 10, ethylcellulose, FD&C blue no 2, FD&C yellow no 6, hypromellose, red iron oxide, talc, and titanium dioxide."
},
{
"NDCCode": "70069-005-10",
"PackageDescription": "25 VIAL in 1 CARTON (70069-005-10) / 1 mL in 1 VIAL (70069-005-01) ",
"NDC11Code": "70069-0005-10",
"ProductNDC": "70069-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyanocobalamin",
"NonProprietaryName": "Cyanocobalamin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20151211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206503",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "CYANOCOBALAMIN",
"StrengthNumber": "1000",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Vitamin B 12 [CS], Vitamin B12 [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151211",
"SamplePackage": "N",
"IndicationAndUsage": "Cyanocobalamin is indicated for Vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacterial overgrowth, total or partial gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel. Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug/Laboratory Test Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of Vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin injection is also suitable for the Vitamin B12 absorption test (Schilling test).",
"Description": "Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous use. Each mL contains 1,000 mcg cyanocobalamin; sodium chloride 0.9%; benzyl alcohol 1.5%; Water for Injection q.s.; Hydrochloric acid and/or sodium hydroxide for pH adjustment if necessary (4.5-7.0). Cyanocobalamin appears as dark, red crystals or as an amorphous or crystalline, red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The Vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide. The cobalt content is 4.34%. The structural formula is represented below."
},
{
"NDCCode": "70069-008-10",
"PackageDescription": "10 CARTON in 1 CARTON (70069-008-10) / 1 BOTTLE in 1 CARTON (70069-008-01) / 5 mL in 1 BOTTLE",
"NDC11Code": "70069-0008-10",
"ProductNDC": "70069-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinastine Hydrochloride",
"NonProprietaryName": "Epinastine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20160914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090951",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "EPINASTINE HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic Agonists [MoA], Adrenergic Receptor Agonist [EPC], Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160914",
"SamplePackage": "N",
"IndicationAndUsage": "Epinastine HCl Ophthalmic Solution is an H1 histamine receptor antagonist indicated for the prevention of itching associated with allergic conjunctivitis.",
"Description": "Epinastine HCl Ophthalmic Solution 0.05% is a clear, colorless, sterile isotonic solution containing epinastine HCl, an antihistamine and an inhibitor of histamine release from the mast cell for topical administration to the eyes. Epinastine HCl is represented by the following structural formula. C16H15N3HCl Mol. Wt. 285.78. Chemical Name: 3-Amino-9,13b-dihydro-1H-dibenz[c,f]imidazo [1,5-a]azepine hydrochloride. Each mL contains: Active: epinastine HCl 0.05% (0.5 mg/mL) equivalent to epinastine 0.044% (0.44 mg/mL); Preservative: benzalkonium chloride 0.01%; Inactives: edetate disodium; water for injection; sodium chloride; sodium phosphate, monobasic; and sodium hydroxide and/or hydrochloric acid (to adjust pH). Epinastine HCl has a pH of approximately 7 and an osmolality range of 250 to 310 mOsm/kg."
},
{
"NDCCode": "70069-014-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-014-10) > 20 mL in 1 VIAL (70069-014-01) ",
"NDC11Code": "70069-0014-10",
"ProductNDC": "70069-014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211705",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220129",
"SamplePackage": "N",
"IndicationAndUsage": "In Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug‑induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
"Description": "Glycopyrrolate Injection is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name:. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33.Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether.Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "70069-025-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-025-10) / 10 mL in 1 VIAL",
"NDC11Code": "70069-0025-10",
"ProductNDC": "70069-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexamethasone Sodium Phosphate",
"NonProprietaryName": "Dexamethasone Sodium Phosphate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211036",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "DEXAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190611",
"SamplePackage": "N",
"IndicationAndUsage": "A. Intravenous or intramuscular administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows. 1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen diseases. During an exacerbation or as maintenance therapy in selected cases of:. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic diseases. Pemphigus. Severe erythema multiforme (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate. trials of conventional treatment in:. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic diseases. Severe acute and chronic allergic and inflammatory processes involving. the eye, such as:. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Allergic corneal marginal ulcers. Keratitis. 7. Gastrointestinal diseases. To tide the patient over a critical period of the disease in:. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory diseases. Symptomatic Sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate. anti-tuberculosis chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (I.V. only; I.M. administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic diseases. For palliative management of:. Leukemias and lymphomas in adults. Acute leukemic of childhood. 11. Edematous states. To induce diuresis or remission of proteinuria in the nephrotic syndrome. without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Nervous system. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently. with appropriate anti-tuberculosis chemotherapy. Trichinosis with neurologic or myocardial involvement. Diagnostic testing of adrenocortical hyperfunction. Cerebral edema of diverse etiologies in conjunction with adequate neurological evaluation and. management.",
"Description": "Dexamethasone sodium phosphate injection, USP is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, C22H28FNa2O8P, has a molecular weight of 516.41 and chemically is Pregn-4-ene-3, 20-dione, 9-fluoro-11, 17-dihydroxy-16-methyl-21 (phosphonooxy)-, disodium salt, (11β, 16α). It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preserved) 10 mg/mL contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
},
{
"NDCCode": "70069-051-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (70069-051-01) / 10 mL in 1 BOTTLE",
"NDC11Code": "70069-0051-01",
"ProductNDC": "70069-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dorzolamide Hydrochloride And Timolol Maleate",
"NonProprietaryName": "Dorzolamide Hydrochloride And Timolol Maleate",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20190625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207523",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE",
"StrengthNumber": "20; 5",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190625",
"SamplePackage": "N",
"IndicationAndUsage": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].",
"Description": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride USP is described chemically as: (4S-trans)-4- (ethylamino)- 5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride USP is optically active. The specific rotation is:. [α] 25°C (C=1, water) = ~ −17°. 405 nm. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to off -white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate USP is:. [α] 25°C in 1N HCl (C = 5) = −12.2°(-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate USP has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate USP is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is supplied as a sterile, clear, colorless to nearly colorless, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride USP) and 5 mg timolol (equivalent to 6.83 mg timolol maleate USP). Inactive ingredients are sodium citrate dihydrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative."
},
{
"NDCCode": "70069-051-12",
"PackageDescription": "12 CARTON in 1 BOX (70069-051-12) / 1 BOTTLE in 1 CARTON (70069-051-01) / 10 mL in 1 BOTTLE",
"NDC11Code": "70069-0051-12",
"ProductNDC": "70069-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dorzolamide Hydrochloride And Timolol Maleate",
"NonProprietaryName": "Dorzolamide Hydrochloride And Timolol Maleate",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20190625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207523",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE",
"StrengthNumber": "20; 5",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-06-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190625",
"SamplePackage": "N",
"IndicationAndUsage": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].",
"Description": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride USP is described chemically as: (4S-trans)-4- (ethylamino)- 5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride USP is optically active. The specific rotation is:. [α] 25°C (C=1, water) = ~ −17°. 405 nm. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to o -white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate USP is:. [α] 25°C in 1N HCl (C = 5) = −12.2°(-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate USP has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate USP is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is supplied as a sterile, clear, colorless to nearly colorless, isotonic, bu ffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride USP) and 5 mg timolol (equivalent to 6.83 mg timolol maleate USP). Inactive ingredients are sodium citrate dihydrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative."
},
{
"NDCCode": "70069-061-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-061-10) / 10 mL in 1 VIAL (70069-061-01) ",
"NDC11Code": "70069-0061-10",
"ProductNDC": "70069-061",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220302",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70069-061-25",
"PackageDescription": "25 VIAL in 1 CARTON (70069-061-25) / 10 mL in 1 VIAL (70069-061-01) ",
"NDC11Code": "70069-0061-25",
"ProductNDC": "70069-061",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180615",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70069-062-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-062-10) / 20 mL in 1 VIAL (70069-062-01) ",
"NDC11Code": "70069-0062-10",
"ProductNDC": "70069-062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220302",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70069-064-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-064-10) / 30 mL in 1 VIAL",
"NDC11Code": "70069-0064-10",
"ProductNDC": "70069-064",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211220",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70069-066-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-066-10) / 10 mL in 1 VIAL (70069-066-01) ",
"NDC11Code": "70069-0066-10",
"ProductNDC": "70069-066",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220302",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70069-066-25",
"PackageDescription": "25 VIAL in 1 VIAL (70069-066-25) / 10 mL in 1 VIAL (70069-066-01) ",
"NDC11Code": "70069-0066-25",
"ProductNDC": "70069-066",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180615",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70069-067-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-067-10) / 20 mL in 1 VIAL (70069-067-01) ",
"NDC11Code": "70069-0067-10",
"ProductNDC": "70069-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "20180615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207636",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220302",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70069-071-10",
"PackageDescription": "10 VIAL in 1 CARTON (70069-071-10) / 1 mL in 1 VIAL (70069-071-01) ",
"NDC11Code": "70069-0071-10",
"ProductNDC": "70069-071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Naloxone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20170808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207633",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170808",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone Hydrochloride Injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol, and cyclazocine. Naloxone hydrochloride is also indicated for the diagnosis of suspected or known acute opioid overdosage. Naloxone may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).",
"Description": "Naloxone Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4.0 (3.0 to 6.5). The single-dose solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required, the unused portion should be discarded. Naloxone Hydrochloride Injection, USP may be administered intravenously, intramuscularly, or subcutaneously. Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. It differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone Hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C19H21NO4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70069-864-10</NDCCode>
<PackageDescription>10 POUCH in 1 CASE (70069-864-10) / 1 BAG in 1 POUCH (70069-864-01) / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>70069-0864-10</NDC11Code>
<ProductNDC>70069-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Foscarnet Sodium</ProprietaryName>
<NonProprietaryName>Foscarnet Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220068</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>FOSCARNET SODIUM</SubstanceName>
<StrengthNumber>24</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Chelating Activity [MoA], DNA Polymerase Inhibitors [MoA], Pyrophosphate Analog DNA Polymerase Inhibitor [EPC], Pyrophosphate Analog [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CMV Retinitis. Foscarnet sodium injection is indicated for the treatment of CMV retinitis in patients with acquired immunodeficiency syndrome (AIDS). Combination therapy with foscarnet sodium injection and ganciclovir is indicated for patients who have relapsed after monotherapy with either drug. SAFETY AND EFFICACY OF FOSCARNET SODIUM INJECTION HAVE NOT BEEN ESTABLISHED FOR TREATMENT OF OTHER CMV INFECTIONS (e.g., PNEUMONITIS, GASTROENTERITIS); CONGENITAL OR NEONATAL CMV DISEASE; OR NONIMMUNOCOMPROMISED INDIVIDUALS. Mucocutaneous Acyclovir Resistant HSV Infections. Foscarnet sodium injection is indicated for the treatment of acyclovir-resistant mucocutaneous HSV infections in immunocompromised patients. SAFETY AND EFFICACY OF FOSCARNET SODIUM INJECTION HAVE NOT BEEN ESTABLISHED FOR TREATMENT OF OTHER HSV INFECTIONS (e.g., RETINITIS, ENCEPHALITIS); CONGENITAL OR NEONATAL HSV DISEASE; OR HSV IN NONIMMUNOCOMPROMISED INDIVIDUALS.</IndicationAndUsage>
<Description>The chemical name of foscarnet sodium is phosphonoformic acid, trisodium salt. Foscarnet sodium is a white, crystalline powder containing 6 equivalents of water of hydration with an empirical formula of Na3CO5P6H2O and a molecular weight of 300.1. The structural formula. Foscarnet sodium injection has the potential to chelate divalent metal ions, such as calcium and magnesium, to form stable coordination compounds. Foscarnet sodium injection is a sterile, isotonic aqueous solution for intravenous administration only. The solution is clear and colorless. Each milliliter of foscarnet sodium injection contains 24 mg of foscarnet sodium hexahydrate in Water for Injection, USP. Hydrochloric acid may have been added to adjust the pH of the solution to 7.4. Foscarnet sodium injection contains no preservatives. VIROLOGY. Mechanism of Action. Foscarnet exerts its antiviral activity by a selective inhibition at the pyrophosphate binding site on virus-specific DNA polymerases at concentrations that do not affect cellular DNA polymerases. Foscarnet does not require activation (phosphorylation) by thymidine kinase or other kinases. Antiviral Activity in Cell Culture. The quantitative relationship between the cell culture susceptibility of human cytomegalovirus (CMV) or herpes simplex virus 1 and 2 (HSV-1 and HSV-2) to foscarnet and clinical response to therapy has not been established and virus sensitivity testing has not been standardized. Sensitivity test results, expressed as the concentration of drug required to inhibit by 50% the growth of virus in cell culture (EC50), vary greatly depending on the assay method used, cell type employed and the laboratory performing the test. A number of sensitive viruses and their EC50 values are listed below (Table 1). The combination antiviral activity of foscarnet and ganciclovir or acyclovir are not antagonistic in cell culture. TABLE 1 Foscarnet Inhibition of Virus Replication in Cell Culture. *Mean = 269 μM. Antiviral Activity in vivo. Statistically significant decreases in positive CMV cultures from blood and urine have been demonstrated in two studies (FOS-03 and ACTG-015/915) of subjects treated with foscarnet sodium injection. Although median time to progression of CMV retinitis was increased in subjects treated with foscarnet sodium injection, reductions in positive blood or urine cultures have not been shown to correlate with clinical efficacy in individual subjects (Table 2). TABLE 2. Blood and Urine Culture Results from CMV Retinitis Patients*. *A total of 77 subjects were treated with foscarnet sodium injection in two clinical trials (FOS-03 and ACTG-015/915). Not all subjects had blood or urine cultures done and some subjects had results from both cultures. † (60 mg/kg foscarnet sodium injection TID for 2–3 weeks). Resistance. Cell culture: CMV and HSV isolates with reduced susceptibility to foscarnet have been selected in cell culture by passage of wild type virus in the presence of increasing concentrations of the drug. All foscarnet resistant isolates are known to be generated through amino acid substitutions in the viral DNA polymerase pUL54 (CMV) or pUL30 (HSV) (Table 3). TABLE 3. Summary of Foscarnet Resistance-associated DNA Polymerase Amino Acid Substitutions in Cell Culture. In vivo: Limited clinical data are available on the development of clinical resistance to foscarnet and many pathways to resistance likely exist. Substitutions documented in the literature in treated patients as associated with foscarnet resistance, are listed in Table 4. TABLE 4 Summary of Foscarnet Resistance-associated Amino Acid Substitutions Observed in Treated Patients. Note: Many additional pathways to foscarnet resistance likely exist. The possibility of viral resistance should be considered in patients who show poor clinical response or experience persistent viral excretion during therapy. Cross-Resistance: The amino acid substitutions that resulted in reduced susceptibility to foscarnet and either ganciclovir, acyclovir and/or cidofovir are summarized in Tables 5 and 6. TABLE 5 Summary of CMV DNA polymerase Amino Acid Substitutions Conferring Foscarnet Resistance with Cross-Resistance to Ganciclovir and/or Cidofovir. TABLE 6 Summary of HSV DNA polymerase Amino Acid Substitutions Conferring Foscarnet Resistance with Cross-Resistance to Acyclovir and/or Cidofovir.</Description>
</NDC>
<NDC>
<NDCCode>21130-864-15</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (21130-864-15) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>21130-0864-15</NDC11Code>
<ProductNDC>21130-864</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gas Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part332</ApplicationNumber>
<LabelerName>Better Living Brands, LLC</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43469-864-10</NDCCode>
<PackageDescription>10 PATCH in 1 CARTON (43469-864-10)</PackageDescription>
<NDC11Code>43469-0864-10</NDC11Code>
<ProductNDC>43469-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Synera</ProprietaryName>
<NonProprietaryName>Lidocaine And Tetracaine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>CUTANEOUS</RouteName>
<StartMarketingDate>20050623</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021623</ApplicationNumber>
<LabelerName>ZARS Pharma, Inc.</LabelerName>
<SubstanceName>LIDOCAINE; TETRACAINE</SubstanceName>
<StrengthNumber>70; 70</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE],Ester Local Anesthetic [EPC],Esters [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-09-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>50458-864-02</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (50458-864-02) > 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>50458-0864-02</NDC11Code>
<ProductNDC>50458-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nucynta</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110825</StartMarketingDate>
<EndMarketingDate>20200331</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20110825</StartMarketingDatePackage>
<EndMarketingDatePackage>20200331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>54458-864-10</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (54458-864-10)</PackageDescription>
<NDC11Code>54458-0864-10</NDC11Code>
<ProductNDC>54458-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pioglitazone</ProprietaryName>
<NonProprietaryName>Pioglitazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077210</ApplicationNumber>
<LabelerName>International Laboratories, LLC</LabelerName>
<SubstanceName>PIOGLITAZONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>45</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [CS],PPAR gamma [CS],Thiazolidinedione [EPC],Thiazolidinediones [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Monotherapy and Combination Therapy. Pioglitazone tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus in multiple clinical settings [see Clinical Studies (14)]. Important Limitations of Use. Pioglitazone tablets exert their antihyperglycemic effect only in the presence of endogenous insulin. Pioglitazone tablets should not be used to treat type 1 diabetes or diabetic ketoacidosis, as it would not be effective in these settings. Use caution in patients with liver disease [see Warnings and Precautions (5.3)].</IndicationAndUsage>
<Description>Pioglitazone hydrochloride tablets USP are a thiazolidinedione and an agonist for peroxisome proliferator-activated receptor (PPAR) gamma that contains an oral antidiabetic medication: pioglitazone. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl)ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. C19H20N2O3SHCl M.W. 392.90. Pioglitazone hydrochloride, USP is an odorless white crystalline powder. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Pioglitazone tablets USP are available for oral administration containing 15 mg, 30 mg, or 45 mg of pioglitazone (as the base) formulated with the following excipients: carboxymethylcellulose calcium, hydroxypropyl cellulose, magnesium stearate, and mannitol.</Description>
</NDC>
<NDC>
<NDCCode>59779-864-10</NDCCode>
<PackageDescription>1 KIT in 1 KIT (59779-864-10) * 10 PACKET in 1 KIT > 3000 mg in 1 PACKET (59779-408-01) * 1 CARTON in 1 KIT > 1 in 1 CARTON (GS1:307073877636)</PackageDescription>
<NDC11Code>59779-0864-10</NDC11Code>
<ProductNDC>59779-864</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cvs</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20160325</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>CVS Pharmacy</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses. Temporarily relieves symptoms associated with. sinusitis, cold, flu or allergies. -Sneezing. -Runny nose. -Nasal stuffiness. -Post nasal drip. -Removes inhaled irritants (dust, pollen). -Promotes nasal and sinus drainage. -Helps reduce swelling of nasal membranes. -Moisturizes dry nasal passages.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>60429-864-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (60429-864-10) </PackageDescription>
<NDC11Code>60429-0864-10</NDC11Code>
<ProductNDC>60429-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076958</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170309</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61619-864-10</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (61619-864-10) > 29.6 mL in 1 BOTTLE, PLASTIC (61619-864-06) </PackageDescription>
<NDC11Code>61619-0864-10</NDC11Code>
<ProductNDC>61619-864</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pro-tect Sports Sunscreen Spf 20</ProprietaryName>
<NonProprietaryName>Meradimate, Octinoxate, Octisalate, Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>CUTANEOUS</RouteName>
<StartMarketingDate>20160205</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>A-Cute Derm, Incorporated</LabelerName>
<SubstanceName>MERADIMATE; OCTINOXATE; OCTISALATE; OXYBENZONE</SubstanceName>
<StrengthNumber>50; 75; 50; 30</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62037-864-20</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (62037-864-20) > 1 SYRINGE in 1 BLISTER PACK > .8 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>62037-0864-20</NDC11Code>
<ProductNDC>62037-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20120213</StartMarketingDate>
<EndMarketingDate>20180630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076684</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/.8mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [Chemical/Ingredient],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120213</StartMarketingDatePackage>
<EndMarketingDatePackage>20180630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62257-864-10</NDCCode>
<PackageDescription>1000 mL in 1 CARTRIDGE (62257-864-10) </PackageDescription>
<NDC11Code>62257-0864-10</NDC11Code>
<ProductNDC>62257-864</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Palm</ProprietaryName>
<NonProprietaryName>Chloroxylenol</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160819</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>ABC Compounding Co., Inc.</LabelerName>
<SubstanceName>CHLOROXYLENOL</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63304-864-69</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (63304-864-69)</PackageDescription>
<NDC11Code>63304-0864-69</NDC11Code>
<ProductNDC>63304-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Febuxostat</ProprietaryName>
<NonProprietaryName>Febuxostat</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205392</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>FEBUXOSTAT</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63868-864-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (63868-864-20) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63868-0864-20</NDC11Code>
<ProductNDC>63868-864</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Daytime Cold And Flu</ProprietaryName>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170308</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Chain Drug Marketing Association Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170308</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to a cold or flu:.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67777-006-10</NDCCode>
<PackageDescription>864 BOX in 1 CASE (67777-006-10) / 144 PACKET in 1 BOX (67777-006-09) / 5 g in 1 PACKET</PackageDescription>
<NDC11Code>67777-0006-10</NDC11Code>
<ProductNDC>67777-006</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vitamins A And D Without Lanolin</ProprietaryName>
<NonProprietaryName>Skin Protectant</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170404</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Dynarex Corporation</LabelerName>
<SubstanceName>PETROLATUM</SubstanceName>
<StrengthNumber>93</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily protects minor cuts, scrapes,burns. Temporarily protects and helps relieve chafed, chapped, or cracked skin and lips. Helps prevent and protect from the drying effects of wind and cold weather.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68382-864-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-864-77) / 10 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (68382-864-30) </PackageDescription>
<NDC11Code>68382-0864-77</NDC11Code>
<ProductNDC>68382-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207382</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate extended-release capsules are indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 6 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome (LGS) in patients 6 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3).</IndicationAndUsage>
<Description>Topiramate, is a sulfamate-substituted monosaccharide. Topiramate extended-release capsules are available as 25 mg, 50 mg and 100 mg capsules for oral administration. Topiramate, USP is a white to off-white crystalline powder. Topiramate is freely soluble in dichloromethane. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.4. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate extended-release capsules contain 25 mg, 50 mg, 100 mg or 200 mg of. topiramate and contains following inactive ingredients: ethyl cellulose, hypromellose. microcrystalline cellulose, polyethylene glycol, talc and triethyl citrate. Additionally, each 25 mg, 50 mg and 100 mg capsule contain hydrogenated castor oil. and povidone and each 200 mg capsule contains hydroxypropyl cellulose. The capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide and water. The capsule is imprinted with black pharmaceutical ink and contains following. inactive ingredients: black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68382-864-78</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (68382-864-78) / 10 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (68382-864-30) </PackageDescription>
<NDC11Code>68382-0864-78</NDC11Code>
<ProductNDC>68382-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207382</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate extended-release capsules are indicated for: 1 Epilepsy:initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 6 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset, primary generalized tonic-clonic seizures or seizures associated with Lennox-Gastaut syndrome (LGS) in patients 6 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3).</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate extended-release capsules, USP are available as 25 mg, 50 mg, 100 mg and 200 mg capsules for oral administration. Topiramate, USP is a white to off-white crystalline powder. Topiramate is freely soluble in polar organic solvents such as acetonitrile and acetone; and very slightly soluble to practically insoluble in non-polar organic solvents such as hexanes. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate extended-release capsules, USP contain 25 mg, 50 mg ,100 mg or 200 mg of topiramate. Additionally, each capsule contains the following inactive ingredients: ethyl cellulose, hydroxypropyl cellulose, hypromellose, microcrystalline cellulose, polyethylene glycol, talc and triethyl citrate. The capsule shells contain gelatin, sodium lauryl sulfate, titanium dioxide and water. All capsule shells are imprinted with black pharmaceutical ink that contains black iron oxide, potassium hydroxide, propylene glycol and shellac. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68462-864-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (68462-864-10) </PackageDescription>
<NDC11Code>68462-0864-10</NDC11Code>
<ProductNDC>68462-864</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlorpromazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212144</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.</IndicationAndUsage>
<Description>Chlorpromazine hydrochloride, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. Chemical Name: C17H19ClN2S.HCl. Molecular Weight: 355.33 g/mol. Chlorpromazine hydrochloride, USP occurs as white or slightly creamy white crystalline powder. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive Ingredients:. 10 mg contains: corn starch, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The coating material opadry brown contains diethyl phthalate, D&C yellow no 10, ethylcellulose, FD&C blue no 2, FD&C yellow no 6, hypromellose, red iron oxide, talc, and titanium dioxide. 25 mg contains: corn starch, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The coating material opadry orange contains diethyl phthalate, D&C yellow no 10, ethylcellulose, FD&C yellow no 6, hypromellose, red iron oxide, talc, and titanium dioxide. 50 mg, 100 mg and 200 mg contains: corn starch, colloidal silicon dioxide, lactose monohydrate, anhydrous lactose, microcrystalline cellulose, magnesium stearate, poloxamer 188 micro, pregelatinized starch, povidone, and sodium starch glycolate. The coating material opadry brown contains diethyl phthalate, D&C yellow no 10, ethylcellulose, FD&C blue no 2, FD&C yellow no 6, hypromellose, red iron oxide, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70069-005-10</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70069-005-10) / 1 mL in 1 VIAL (70069-005-01) </PackageDescription>
<NDC11Code>70069-0005-10</NDC11Code>
<ProductNDC>70069-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyanocobalamin</ProprietaryName>
<NonProprietaryName>Cyanocobalamin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20151211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206503</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>CYANOCOBALAMIN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyanocobalamin is indicated for Vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacterial overgrowth, total or partial gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel. Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug/Laboratory Test Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of Vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin injection is also suitable for the Vitamin B12 absorption test (Schilling test).</IndicationAndUsage>
<Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous use. Each mL contains 1,000 mcg cyanocobalamin; sodium chloride 0.9%; benzyl alcohol 1.5%; Water for Injection q.s.; Hydrochloric acid and/or sodium hydroxide for pH adjustment if necessary (4.5-7.0). Cyanocobalamin appears as dark, red crystals or as an amorphous or crystalline, red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The Vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide. The cobalt content is 4.34%. The structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>70069-008-10</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (70069-008-10) / 1 BOTTLE in 1 CARTON (70069-008-01) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70069-0008-10</NDC11Code>
<ProductNDC>70069-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinastine Hydrochloride</ProprietaryName>
<NonProprietaryName>Epinastine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20160914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090951</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>EPINASTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic Agonists [MoA], Adrenergic Receptor Agonist [EPC], Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinastine HCl Ophthalmic Solution is an H1 histamine receptor antagonist indicated for the prevention of itching associated with allergic conjunctivitis.</IndicationAndUsage>
<Description>Epinastine HCl Ophthalmic Solution 0.05% is a clear, colorless, sterile isotonic solution containing epinastine HCl, an antihistamine and an inhibitor of histamine release from the mast cell for topical administration to the eyes. Epinastine HCl is represented by the following structural formula. C16H15N3HCl Mol. Wt. 285.78. Chemical Name: 3-Amino-9,13b-dihydro-1H-dibenz[c,f]imidazo [1,5-a]azepine hydrochloride. Each mL contains: Active: epinastine HCl 0.05% (0.5 mg/mL) equivalent to epinastine 0.044% (0.44 mg/mL); Preservative: benzalkonium chloride 0.01%; Inactives: edetate disodium; water for injection; sodium chloride; sodium phosphate, monobasic; and sodium hydroxide and/or hydrochloric acid (to adjust pH). Epinastine HCl has a pH of approximately 7 and an osmolality range of 250 to 310 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>70069-014-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-014-10) > 20 mL in 1 VIAL (70069-014-01) </PackageDescription>
<NDC11Code>70069-0014-10</NDC11Code>
<ProductNDC>70069-014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211705</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>In Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug‑induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
<Description>Glycopyrrolate Injection is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name:. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33.Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether.Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>70069-025-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-025-10) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>70069-0025-10</NDC11Code>
<ProductNDC>70069-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211036</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>A. Intravenous or intramuscular administration. When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, those products labeled for intravenous or intramuscular use are indicated as follows. 1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in:. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen diseases. During an exacerbation or as maintenance therapy in selected cases of:. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic diseases. Pemphigus. Severe erythema multiforme (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic states. Control of severe or incapacitating allergic conditions intractable to adequate. trials of conventional treatment in:. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic diseases. Severe acute and chronic allergic and inflammatory processes involving. the eye, such as:. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Allergic corneal marginal ulcers. Keratitis. 7. Gastrointestinal diseases. To tide the patient over a critical period of the disease in:. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory diseases. Symptomatic Sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate. anti-tuberculosis chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (I.V. only; I.M. administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic diseases. For palliative management of:. Leukemias and lymphomas in adults. Acute leukemic of childhood. 11. Edematous states. To induce diuresis or remission of proteinuria in the nephrotic syndrome. without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Nervous system. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently. with appropriate anti-tuberculosis chemotherapy. Trichinosis with neurologic or myocardial involvement. Diagnostic testing of adrenocortical hyperfunction. Cerebral edema of diverse etiologies in conjunction with adequate neurological evaluation and. management.</IndicationAndUsage>
<Description>Dexamethasone sodium phosphate injection, USP is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, C22H28FNa2O8P, has a molecular weight of 516.41 and chemically is Pregn-4-ene-3, 20-dione, 9-fluoro-11, 17-dihydroxy-16-methyl-21 (phosphonooxy)-, disodium salt, (11β, 16α). It occurs as a white to practically white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.5 and 9.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preserved) 10 mg/mL contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>70069-051-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70069-051-01) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70069-0051-01</NDC11Code>
<ProductNDC>70069-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</ProprietaryName>
<NonProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20190625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207523</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>20; 5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride USP is described chemically as: (4S-trans)-4- (ethylamino)- 5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride USP is optically active. The specific rotation is:. [α] 25°C (C=1, water) = ~ −17°. 405 nm. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to off -white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate USP is:. [α] 25°C in 1N HCl (C = 5) = −12.2°(-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate USP has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate USP is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is supplied as a sterile, clear, colorless to nearly colorless, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride USP) and 5 mg timolol (equivalent to 6.83 mg timolol maleate USP). Inactive ingredients are sodium citrate dihydrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>70069-051-12</NDCCode>
<PackageDescription>12 CARTON in 1 BOX (70069-051-12) / 1 BOTTLE in 1 CARTON (70069-051-01) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70069-0051-12</NDC11Code>
<ProductNDC>70069-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</ProprietaryName>
<NonProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20190625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207523</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>20; 5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride USP is described chemically as: (4S-trans)-4- (ethylamino)- 5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride USP is optically active. The specific rotation is:. [α] 25°C (C=1, water) = ~ −17°. 405 nm. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride USP has a molecular weight of 360.91. It is a white to o -white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate USP is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate USP is:. [α] 25°C in 1N HCl (C = 5) = −12.2°(-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate USP has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate USP is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution USP is supplied as a sterile, clear, colorless to nearly colorless, isotonic, bu ffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride USP) and 5 mg timolol (equivalent to 6.83 mg timolol maleate USP). Inactive ingredients are sodium citrate dihydrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>70069-061-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-061-10) / 10 mL in 1 VIAL (70069-061-01) </PackageDescription>
<NDC11Code>70069-0061-10</NDC11Code>
<ProductNDC>70069-061</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70069-061-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70069-061-25) / 10 mL in 1 VIAL (70069-061-01) </PackageDescription>
<NDC11Code>70069-0061-25</NDC11Code>
<ProductNDC>70069-061</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70069-062-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-062-10) / 20 mL in 1 VIAL (70069-062-01) </PackageDescription>
<NDC11Code>70069-0062-10</NDC11Code>
<ProductNDC>70069-062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70069-064-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-064-10) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>70069-0064-10</NDC11Code>
<ProductNDC>70069-064</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70069-066-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-066-10) / 10 mL in 1 VIAL (70069-066-01) </PackageDescription>
<NDC11Code>70069-0066-10</NDC11Code>
<ProductNDC>70069-066</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70069-066-25</NDCCode>
<PackageDescription>25 VIAL in 1 VIAL (70069-066-25) / 10 mL in 1 VIAL (70069-066-01) </PackageDescription>
<NDC11Code>70069-0066-25</NDC11Code>
<ProductNDC>70069-066</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70069-067-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-067-10) / 20 mL in 1 VIAL (70069-067-01) </PackageDescription>
<NDC11Code>70069-0067-10</NDC11Code>
<ProductNDC>70069-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>20180615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207636</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C17H26N2OHClH2O M.W. 328.89. At 25°C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2 mg, 5 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous) and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70069-071-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70069-071-10) / 1 mL in 1 VIAL (70069-071-01) </PackageDescription>
<NDC11Code>70069-0071-10</NDC11Code>
<ProductNDC>70069-071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207633</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone Hydrochloride Injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol, and cyclazocine. Naloxone hydrochloride is also indicated for the diagnosis of suspected or known acute opioid overdosage. Naloxone may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4.0 (3.0 to 6.5). The single-dose solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required, the unused portion should be discarded. Naloxone Hydrochloride Injection, USP may be administered intravenously, intramuscularly, or subcutaneously. Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. It differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone Hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C19H21NO4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula.</Description>
</NDC>
</NDCList>