{
"NDC": [
{
"NDCCode": "70121-2428-3",
"PackageDescription": "24 CARTON in 1 CARTON (70121-2428-3) / 1 SYRINGE, GLASS in 1 CARTON (70121-2428-1) / 4 mL in 1 SYRINGE, GLASS",
"NDC11Code": "70121-2428-03",
"ProductNDC": "70121-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218870",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251002",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol hydrochloride injection is indicated for control of blood pressure in severe hypertension.",
"Description": "Labetalol hydrochloride is an adrenergic receptor blocking agent that has both selective alpha1- and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride is a racemate, chemically designated as 5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino]ethyl]salicylamide monohydrochloride and has the following structural formula. Labetalol hydrochloride has the molecular formula C19H24N2O3 HCl and a molecular weight of 364.87 g/mol. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol hydrochloride, USP is a white to off-white powder, sparingly soluble in water and in ethanol (96%), practically insoluble in methylene chloride. Labetalol hydrochloride injection, USP is a clear, colorless to light yellow aqueous sterile isotonic solution for intravenous injection. It has a pH range of 3.0 to 4.5. Each mL contains 5 mg labetalol hydrochloride, USP; 45 mg anhydrous dextrose; 0.1 mg edetate disodium; 0.8 mg methylparaben and 0.1 mg propylparaben as preservatives; citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range."
},
{
"NDCCode": "36987-2428-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-2428-3)",
"NDC11Code": "36987-2428-03",
"ProductNDC": "36987-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"NonProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102196",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "37662-2428-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-2428-3) ",
"NDC11Code": "37662-2428-03",
"ProductNDC": "37662-2428",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rhus Toxicodendron",
"NonProprietaryName": "Rhus Toxicodendron",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230119",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "TOXICODENDRON PUBESCENS LEAF",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230119",
"SamplePackage": "N"
},
{
"NDCCode": "68071-2428-3",
"PackageDescription": "1 TUBE in 1 CARTON (68071-2428-3) / 3.5 g in 1 TUBE",
"NDC11Code": "68071-2428-03",
"ProductNDC": "68071-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin And Polymyxin B Sulfates And Dexamethasone",
"NonProprietaryName": "Neomycin Sulfate, Polymyxin B Sulfate, And Dexamethasone",
"DosageFormName": "OINTMENT",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "19940725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064063",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "NEOMYCIN SULFATE; POLYMYXIN B SULFATE; DEXAMETHASONE",
"StrengthNumber": "3.5; 10000; 1",
"StrengthUnit": "mg/g; [USP'U]/g; mg/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "For steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where bacterial infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns; or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens: Staphylococcus aureus, Escherichia coli, Haemophilus influenzae, Klebsiella/Enterobacter species, Neisseria species , and Pseudomonas aeruginosa. This product does not provide adequate coverage against: Serratia marcescens and Streptococci, including Streptococcus pneumoniae.",
"Description": "Neomycin and Polymyxin B Sulfates and Dexamethasone Ophthalmic Ointment, USP is a multiple dose anti-infective steroid combination in sterile ointment form for topical application. The chemical structure for the active ingredient Neomycin Sulfate is. The chemical structure for the active ingredient Polymyxin B Sulfate is:. The chemical structure for the active ingredient Dexamethasone is:. Established Name: Dexamethasone Chemical Name: pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 17, 21-trihydroxy-16-methyl-, (11β, 16α) -. Each gram contains: Actives: neomycin sulfate equivalent to neomycin 3.5 mg, polymyxin B sulfate 10,000 units, dexamethasone 0.1%. Preservatives: methylparaben 0.05%, propylparaben 0.01%. Inactives: white petrolatum, lanolin, mineral oil."
},
{
"NDCCode": "71335-2428-3",
"PackageDescription": "120 TABLET in 1 BOTTLE (71335-2428-3) ",
"NDC11Code": "71335-2428-03",
"ProductNDC": "71335-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201109",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250131",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine tablet is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .",
"Description": "Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow. Each 25 mg film-coated tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg film-coated tablet contains. 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg film-coated tablet contains 115.12 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 200 mg film-coated tablet contains 230.24 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg film-coated tablet contains 345.36 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg film-coated tablet contains 460.48 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine."
},
{
"NDCCode": "70121-1463-2",
"PackageDescription": "2 SYRINGE, GLASS in 1 CARTON (70121-1463-2) / 5 mL in 1 SYRINGE, GLASS (70121-1463-3) ",
"NDC11Code": "70121-1463-02",
"ProductNDC": "70121-1463",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fulvestrant",
"NonProprietaryName": "Fulvestrant",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20190304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210044",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "FULVESTRANT",
"StrengthNumber": "250",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Estrogen Receptor Antagonist [EPC], Estrogen Receptor Antagonists [MoA], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190304",
"SamplePackage": "N",
"IndicationAndUsage": "Monotherapy. Fulvestrant injection is indicated for the treatment of: 1 Hormone receptor (HR)-positive, human epidermal growth factor receptor 2 (HER2)-negative advanced breast cancer in postmenopausal women not previously treated with endocrine therapy, or , 2 HR-positive advanced breast cancer in postmenopausal women with disease progression following endocrine therapy.",
"Description": "Fulvestrant injection for intramuscular administration is an estrogen receptor antagonist. The chemical name is 7-alpha-[9-(4,4,5,5,5-penta fluoropentylsulphinyl) nonyl]estra-1,3,5-(10)- triene-3,17-beta-diol. The molecular formula is C32H47F5O3S and its structural formula is. Fulvestrant, USP is a white powder with a molecular weight of 606.77. The solution for injection is a clear, colorless to yellow, viscous liquid. Fulvestrant injection is supplied as two 5 mL clear glass barrels, each containing 250 mg/5 mL of fulvestrant injection solution for intramuscular injection. Each injection contains as inactive ingredients: 12.29% v/v Alcohol, USP; 10% w/v Benzyl Alcohol, NF; 15% w/v Benzyl Benzoate, USP as co-solvents; and made up to 100% w/v with Castor Oil, USP as a co-solvent and release rate modifier."
},
{
"NDCCode": "70121-1482-2",
"PackageDescription": "1 KIT in 1 CARTON (70121-1482-2) * 3 mL in 1 VIAL (70121-3639-1) * 30 mL in 1 VIAL, SINGLE-DOSE (70121-1668-1) ",
"NDC11Code": "70121-1482-02",
"ProductNDC": "70121-1482",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carmustine",
"NonProprietaryName": "Carmustine",
"DosageFormName": "KIT",
"StartMarketingDate": "20181022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211229",
"LabelerName": "Amneal Pharmaceuticals LLC",
"Status": "Active",
"LastUpdate": "2023-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181022",
"SamplePackage": "N",
"IndicationAndUsage": "Carmustine for injection is indicated as palliative therapy as a single agent or in established combination therapy in the following:. - Brain tumors glioblastoma, brainstem glioma, medulloblastoma, astrocytoma, ependymoma, and metastatic brain tumors. - Multiple myeloma in combination with prednisone. - Relapsed or refractory Hodgkin's lymphoma in combination with other approved drugs. - Relapsed or refractory Non-Hodgkin's lymphomas in combination with other approved drugs.",
"Description": "The active ingredient in carmustine for injection, USP is a nitrosourea with the chemical name 1,3-bis(2-chloroethyl)-1-nitrosourea and a molecular weight of 214.05 g/mol. The drug product is supplied as sterile lyophilized pale yellow flakes or a congealed mass, and it is highly soluble in alcohol and lipids, and poorly soluble in water. Carmustine for injection is administered by intravenous infusion after reconstitution, as recommended. The molecular formula of carmustine is C5H9Cl2N3O2 and the structural formula of carmustine is. Carmustine for injection, USP is available in 100 mg single-dose vials of lyophilized material. Sterile diluent for constitution of carmustine for injection, USP is co-packaged with the active drug product for use in constitution of the lyophile. The diluent is supplied in a vial containing 3 mL of dehydrated alcohol injection, USP."
},
{
"NDCCode": "70121-1586-3",
"PackageDescription": "5 VIAL in 1 CARTON (70121-1586-3) / 4 mL in 1 VIAL (70121-1586-1) ",
"NDC11Code": "70121-1586-03",
"ProductNDC": "70121-1586",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210994",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180717",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil hydrochloride injection is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong- Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride USP, 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.9 (4.0 to 6.5). The chemical name of verapamil hydrochloride is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) monohydrochloride (±)-. Verapamil hydrochloride, USP is white or practically white crystalline powder. It is practically odorless and has a bitter taste with a molecular formula C27H38N2O4HCl, and a molecular weight of 491.06 g/mol. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "70121-1712-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1712-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "70121-1712-03",
"ProductNDC": "70121-1712",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216604",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230519",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine hydrochloride is a alpha2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride in 0.9% sodium chloride injection by continuous infusion not to exceed 24 hours. (1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).",
"Description": "Dexmedetomidine hydrochloride in 0.9% sodium chloride injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-,monohydrochloride, (S)-. Dexmedetomidine hydrochloride has a molecular weight of 236.74 and the molecular formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is a white to off-white powder that is freely soluble in water, chloroform, methanol and ethanol. It has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 5.5. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride, USP equivalent to 4 mcg (0.004 mg) of dexmedetomidine; 9 mg sodium chloride, USP; 483 mcg sodium acetate trihydrate, USP; 87 mcg glacial acetic acid, USP and water for injection, USP. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "70121-1716-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1716-3) / 1 BAG in 1 POUCH / 250 mL in 1 BAG",
"NDC11Code": "70121-1716-03",
"ProductNDC": "70121-1716",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esmolol Hydrochloride",
"NonProprietaryName": "Esmolol Hydrochloride In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20221216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216603",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ESMOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Esmolol hydrochloride in sodium chloride injection is a beta adrenergic blocker indicated for the short-term treatment of: : 1 Control of ventricular rate in supraventricular tachycardia including atrial fibrillation and atrial flutter and control of heart rate in non-compensatory sinus tachycardia. (1.1), 2 Control of perioperative tachycardia and hypertension. (1.2).",
"Description": "Esmolol hydrochloride in sodium chloride injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride, USP is: 1 4-[2-Hydroxy –3-[(1-methylethyl)amino]-propoxy]benzenepropanoic acid methyl ester hydrochloride and has the following structure:."
},
{
"NDCCode": "70121-1717-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1717-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "70121-1717-03",
"ProductNDC": "70121-1717",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Esmolol Hydrochloride",
"NonProprietaryName": "Esmolol Hydrochloride In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20221216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216603",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ESMOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Esmolol hydrochloride in sodium chloride injection is a beta adrenergic blocker indicated for the short-term treatment of: : 1 Control of ventricular rate in supraventricular tachycardia including atrial fibrillation and atrial flutter and control of heart rate in non-compensatory sinus tachycardia. (1.1), 2 Control of perioperative tachycardia and hypertension. (1.2).",
"Description": "Esmolol hydrochloride in sodium chloride injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride, USP is: 1 4-[2-Hydroxy –3-[(1-methylethyl)amino]-propoxy]benzenepropanoic acid methyl ester hydrochloride and has the following structure:."
},
{
"NDCCode": "70121-1720-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1720-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "70121-1720-03",
"ProductNDC": "70121-1720",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate In Water For",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216597",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240108",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium sulfate in water for injection is a sterile, nonpyrogenic, clear and colorless solution of magnesium sulfate heptahydrate, USP in water for injection, USP. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% concentration. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate heptahydrate is chemically designated as MgSO4 7H2O and its molecular weight is 246.5 g/mol and having below structural formula. Magnesium sulfate heptahydrate, USP is white or almost white crystalline powder or brilliant colorless crystals which is freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96%). Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non polyvinylchloride."
},
{
"NDCCode": "70121-1732-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1732-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "70121-1732-03",
"ProductNDC": "70121-1732",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20230317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216605",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231204",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70121-1733-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1733-3) / 1 BAG in 1 POUCH / 200 mL in 1 BAG",
"NDC11Code": "70121-1733-03",
"ProductNDC": "70121-1733",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20230317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216605",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231204",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70121-1734-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1734-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "70121-1734-03",
"ProductNDC": "70121-1734",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20230317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216605",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231204",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70121-1735-3",
"PackageDescription": "12 POUCH in 1 CARTON (70121-1735-3) / 1 BAG in 1 POUCH / 200 mL in 1 BAG",
"NDC11Code": "70121-1735-03",
"ProductNDC": "70121-1735",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20230317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216605",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231204",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70121-2715-2",
"PackageDescription": "10 AMPULE in 1 BOX (70121-2715-2) / 10 mL in 1 AMPULE (70121-2715-3) ",
"NDC11Code": "70121-2715-02",
"ProductNDC": "70121-2715",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylene Blue",
"NonProprietaryName": "Methylene Blue",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250303",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216955",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "METHYLENE BLUE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Oxidation-Reduction Activity [MoA], Oxidation-Reduction Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250303",
"SamplePackage": "N",
"IndicationAndUsage": "Methylene blue injection, USP is indicated for the treatment of pediatric and adult patients with acquired methemoglobinemia.",
"Description": "Methylene blue is an oxidation-reduction agent. Its chemical name is 3,7-bis(dimethylamino)phenothiazin-5-ium, chloride hydrate. The molecular formula of methylene blue injection, USP is C16H18ClN3S.xH2O and its molecular weight of 319.86 g/mol for the anhydrous form. The structural formula of Methylene blue is. Methylene blue injection, USP is a sterile solution intended for intravenous administration. Each mL of solution contains 5 mg methylene blue and water for injection. Methylene blue injection, USP is a clear dark blue solution with a pH value between 3.0 and 4.5. The osmolality is between 10 and 15 mOsm/kg. Methylene blue injection, USP strength is expressed in terms of trihydrate."
},
{
"NDCCode": "76420-737-01",
"PackageDescription": "1 KIT in 1 CARTON (76420-737-01) * 25 VIAL in 1 CARTON (70121-1049-5) / 1 mL in 1 VIAL * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1162-18) * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-164-02) / 2 mL in 1 VIAL, SINGLE-DOSE * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 5 mL in 1 POUCH",
"NDC11Code": "76420-0737-01",
"ProductNDC": "76420-737",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mlk F4-c",
"NonProprietaryName": "Bupivacaine Hydrochloride, Lidocaine Hydrochloride, Triamcinolone Acetonide, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate",
"DosageFormName": "KIT",
"StartMarketingDate": "20240701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Asclemed USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240701",
"SamplePackage": "N"
},
{
"NDCCode": "76420-739-01",
"PackageDescription": "1 KIT in 1 CARTON (76420-739-01) * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-162-05) / 5 mL in 1 VIAL, SINGLE-DOSE * 25 VIAL, SINGLE-DOSE in 1 CARTON (70121-1573-5) / 1 mL in 1 VIAL, SINGLE-DOSE * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * 5 mL in 1 POUCH * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS",
"NDC11Code": "76420-0739-01",
"ProductNDC": "76420-739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dyural Lm- C",
"NonProprietaryName": "Methylprednisolone Acetate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate",
"DosageFormName": "KIT",
"StartMarketingDate": "20240701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Asclemed USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240701",
"SamplePackage": "N"
},
{
"NDCCode": "76420-745-01",
"PackageDescription": "1 KIT in 1 CARTON (76420-745-01) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * 5 mL in 1 POUCH * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-162-05) / 5 mL in 1 VIAL, SINGLE-DOSE * 1 VIAL, SINGLE-DOSE in 1 CARTON (70121-1574-1) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "76420-0745-01",
"ProductNDC": "76420-745",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dyural 80 Lm-c",
"NonProprietaryName": "Methylprednisolone Acetate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate",
"DosageFormName": "KIT",
"StartMarketingDate": "20240701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Asclemed USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240701",
"SamplePackage": "N"
},
{
"NDCCode": "0220-2428-41",
"PackageDescription": "80 PELLET in 1 TUBE (0220-2428-41) ",
"NDC11Code": "00220-2428-41",
"ProductNDC": "0220-2428",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hekla Lava",
"NonProprietaryName": "Hekla Lava",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "HEKLA LAVA",
"StrengthNumber": "8",
"StrengthUnit": "[hp_X]/1",
"Status": "Active",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19830303",
"SamplePackage": "N",
"IndicationAndUsage": "Toothache*."
},
{
"NDCCode": "22840-2428-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-2428-2) ",
"NDC11Code": "22840-2428-02",
"ProductNDC": "22840-2428",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Oneseed Juniper Pollen",
"NonProprietaryName": "Juniperus Monosperma",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "JUNIPERUS MONOSPERMA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "22840-2428-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-2428-4) ",
"NDC11Code": "22840-2428-04",
"ProductNDC": "22840-2428",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Oneseed Juniper Pollen",
"NonProprietaryName": "Juniperus Monosperma",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "JUNIPERUS MONOSPERMA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "36987-2428-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-2428-1)",
"NDC11Code": "36987-2428-01",
"ProductNDC": "36987-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"NonProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102196",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "36987-2428-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2428-2)",
"NDC11Code": "36987-2428-02",
"ProductNDC": "36987-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"NonProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102196",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "36987-2428-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-2428-4)",
"NDC11Code": "36987-2428-04",
"ProductNDC": "36987-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"NonProprietaryName": "Standardized Kentucky (june) Bluegrass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102196",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "37662-2428-1",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-2428-1) ",
"NDC11Code": "37662-2428-01",
"ProductNDC": "37662-2428",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rhus Toxicodendron",
"NonProprietaryName": "Rhus Toxicodendron",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230119",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "TOXICODENDRON PUBESCENS LEAF",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230119",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2428-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-2428-2) ",
"NDC11Code": "37662-2428-02",
"ProductNDC": "37662-2428",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rhus Toxicodendron",
"NonProprietaryName": "Rhus Toxicodendron",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230119",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "TOXICODENDRON PUBESCENS LEAF",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230119",
"SamplePackage": "N"
},
{
"NDCCode": "37662-2428-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-2428-4) ",
"NDC11Code": "37662-2428-04",
"ProductNDC": "37662-2428",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rhus Toxicodendron",
"NonProprietaryName": "Rhus Toxicodendron",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230119",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "TOXICODENDRON PUBESCENS LEAF",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230119",
"SamplePackage": "N"
},
{
"NDCCode": "50090-2428-0",
"PackageDescription": "100 TABLET in 1 BOTTLE (50090-2428-0) ",
"NDC11Code": "50090-2428-00",
"ProductNDC": "50090-2428",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018716",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160628",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70121-2428-3</NDCCode>
<PackageDescription>24 CARTON in 1 CARTON (70121-2428-3) / 1 SYRINGE, GLASS in 1 CARTON (70121-2428-1) / 4 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>70121-2428-03</NDC11Code>
<ProductNDC>70121-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218870</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol hydrochloride injection is indicated for control of blood pressure in severe hypertension.</IndicationAndUsage>
<Description>Labetalol hydrochloride is an adrenergic receptor blocking agent that has both selective alpha1- and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride is a racemate, chemically designated as 5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino]ethyl]salicylamide monohydrochloride and has the following structural formula. Labetalol hydrochloride has the molecular formula C19H24N2O3 HCl and a molecular weight of 364.87 g/mol. It has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol hydrochloride, USP is a white to off-white powder, sparingly soluble in water and in ethanol (96%), practically insoluble in methylene chloride. Labetalol hydrochloride injection, USP is a clear, colorless to light yellow aqueous sterile isotonic solution for intravenous injection. It has a pH range of 3.0 to 4.5. Each mL contains 5 mg labetalol hydrochloride, USP; 45 mg anhydrous dextrose; 0.1 mg edetate disodium; 0.8 mg methylparaben and 0.1 mg propylparaben as preservatives; citric acid monohydrate and sodium hydroxide, as necessary, to bring the solution into the pH range.</Description>
</NDC>
<NDC>
<NDCCode>36987-2428-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-2428-3)</PackageDescription>
<NDC11Code>36987-2428-03</NDC11Code>
<ProductNDC>36987-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102196</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>37662-2428-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-2428-3) </PackageDescription>
<NDC11Code>37662-2428-03</NDC11Code>
<ProductNDC>37662-2428</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rhus Toxicodendron</ProprietaryName>
<NonProprietaryName>Rhus Toxicodendron</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230119</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>TOXICODENDRON PUBESCENS LEAF</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68071-2428-3</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (68071-2428-3) / 3.5 g in 1 TUBE</PackageDescription>
<NDC11Code>68071-2428-03</NDC11Code>
<ProductNDC>68071-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin And Polymyxin B Sulfates And Dexamethasone</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate, Polymyxin B Sulfate, And Dexamethasone</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>19940725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064063</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>NEOMYCIN SULFATE; POLYMYXIN B SULFATE; DEXAMETHASONE</SubstanceName>
<StrengthNumber>3.5; 10000; 1</StrengthNumber>
<StrengthUnit>mg/g; [USP'U]/g; mg/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where bacterial infection or a risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns; or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens: Staphylococcus aureus, Escherichia coli, Haemophilus influenzae, Klebsiella/Enterobacter species, Neisseria species , and Pseudomonas aeruginosa. This product does not provide adequate coverage against: Serratia marcescens and Streptococci, including Streptococcus pneumoniae.</IndicationAndUsage>
<Description>Neomycin and Polymyxin B Sulfates and Dexamethasone Ophthalmic Ointment, USP is a multiple dose anti-infective steroid combination in sterile ointment form for topical application. The chemical structure for the active ingredient Neomycin Sulfate is. The chemical structure for the active ingredient Polymyxin B Sulfate is:. The chemical structure for the active ingredient Dexamethasone is:. Established Name: Dexamethasone Chemical Name: pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 17, 21-trihydroxy-16-methyl-, (11β, 16α) -. Each gram contains: Actives: neomycin sulfate equivalent to neomycin 3.5 mg, polymyxin B sulfate 10,000 units, dexamethasone 0.1%. Preservatives: methylparaben 0.05%, propylparaben 0.01%. Inactives: white petrolatum, lanolin, mineral oil.</Description>
</NDC>
<NDC>
<NDCCode>71335-2428-3</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (71335-2428-3) </PackageDescription>
<NDC11Code>71335-2428-03</NDC11Code>
<ProductNDC>71335-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201109</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine tablet is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .</IndicationAndUsage>
<Description>Quetiapine is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow. Each 25 mg film-coated tablet contains 28.78 mg of quetiapine fumarate USP equivalent to 25 mg quetiapine. Each 50 mg film-coated tablet contains. 57.56 mg of quetiapine fumarate USP equivalent to 50 mg quetiapine. Each 100 mg film-coated tablet contains 115.12 mg of quetiapine fumarate USP equivalent to 100 mg quetiapine. Each 200 mg film-coated tablet contains 230.24 mg of quetiapine fumarate USP equivalent to 200 mg quetiapine. Each 300 mg film-coated tablet contains 345.36 mg of quetiapine fumarate USP equivalent to 300 mg quetiapine. Each 400 mg film-coated tablet contains 460.48 mg of quetiapine fumarate USP equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>70121-1463-2</NDCCode>
<PackageDescription>2 SYRINGE, GLASS in 1 CARTON (70121-1463-2) / 5 mL in 1 SYRINGE, GLASS (70121-1463-3) </PackageDescription>
<NDC11Code>70121-1463-02</NDC11Code>
<ProductNDC>70121-1463</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fulvestrant</ProprietaryName>
<NonProprietaryName>Fulvestrant</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20190304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210044</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>FULVESTRANT</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Estrogen Receptor Antagonist [EPC], Estrogen Receptor Antagonists [MoA], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Monotherapy. Fulvestrant injection is indicated for the treatment of: 1 Hormone receptor (HR)-positive, human epidermal growth factor receptor 2 (HER2)-negative advanced breast cancer in postmenopausal women not previously treated with endocrine therapy, or , 2 HR-positive advanced breast cancer in postmenopausal women with disease progression following endocrine therapy.</IndicationAndUsage>
<Description>Fulvestrant injection for intramuscular administration is an estrogen receptor antagonist. The chemical name is 7-alpha-[9-(4,4,5,5,5-penta fluoropentylsulphinyl) nonyl]estra-1,3,5-(10)- triene-3,17-beta-diol. The molecular formula is C32H47F5O3S and its structural formula is. Fulvestrant, USP is a white powder with a molecular weight of 606.77. The solution for injection is a clear, colorless to yellow, viscous liquid. Fulvestrant injection is supplied as two 5 mL clear glass barrels, each containing 250 mg/5 mL of fulvestrant injection solution for intramuscular injection. Each injection contains as inactive ingredients: 12.29% v/v Alcohol, USP; 10% w/v Benzyl Alcohol, NF; 15% w/v Benzyl Benzoate, USP as co-solvents; and made up to 100% w/v with Castor Oil, USP as a co-solvent and release rate modifier.</Description>
</NDC>
<NDC>
<NDCCode>70121-1482-2</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (70121-1482-2) * 3 mL in 1 VIAL (70121-3639-1) * 30 mL in 1 VIAL, SINGLE-DOSE (70121-1668-1) </PackageDescription>
<NDC11Code>70121-1482-02</NDC11Code>
<ProductNDC>70121-1482</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carmustine</ProprietaryName>
<NonProprietaryName>Carmustine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20181022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211229</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carmustine for injection is indicated as palliative therapy as a single agent or in established combination therapy in the following:. - Brain tumors glioblastoma, brainstem glioma, medulloblastoma, astrocytoma, ependymoma, and metastatic brain tumors. - Multiple myeloma in combination with prednisone. - Relapsed or refractory Hodgkin's lymphoma in combination with other approved drugs. - Relapsed or refractory Non-Hodgkin's lymphomas in combination with other approved drugs.</IndicationAndUsage>
<Description>The active ingredient in carmustine for injection, USP is a nitrosourea with the chemical name 1,3-bis(2-chloroethyl)-1-nitrosourea and a molecular weight of 214.05 g/mol. The drug product is supplied as sterile lyophilized pale yellow flakes or a congealed mass, and it is highly soluble in alcohol and lipids, and poorly soluble in water. Carmustine for injection is administered by intravenous infusion after reconstitution, as recommended. The molecular formula of carmustine is C5H9Cl2N3O2 and the structural formula of carmustine is. Carmustine for injection, USP is available in 100 mg single-dose vials of lyophilized material. Sterile diluent for constitution of carmustine for injection, USP is co-packaged with the active drug product for use in constitution of the lyophile. The diluent is supplied in a vial containing 3 mL of dehydrated alcohol injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>70121-1586-3</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (70121-1586-3) / 4 mL in 1 VIAL (70121-1586-1) </PackageDescription>
<NDC11Code>70121-1586-03</NDC11Code>
<ProductNDC>70121-1586</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210994</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil hydrochloride injection is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong- Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride USP, 2.5 mg/mL and sodium chloride 8.5 mg/mL in water for injection. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid for pH adjustment; pH is 4.9 (4.0 to 6.5). The chemical name of verapamil hydrochloride is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) monohydrochloride (±)-. Verapamil hydrochloride, USP is white or practically white crystalline powder. It is practically odorless and has a bitter taste with a molecular formula C27H38N2O4HCl, and a molecular weight of 491.06 g/mol. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>70121-1712-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1712-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1712-03</NDC11Code>
<ProductNDC>70121-1712</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216604</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine hydrochloride is a alpha2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride in 0.9% sodium chloride injection by continuous infusion not to exceed 24 hours. (1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).</IndicationAndUsage>
<Description>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine and is chemically described 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-,monohydrochloride, (S)-. Dexmedetomidine hydrochloride has a molecular weight of 236.74 and the molecular formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is a white to off-white powder that is freely soluble in water, chloroform, methanol and ethanol. It has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is supplied as a clear, colorless, isotonic solution with a pH of 4.5 to 5.5. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride, USP equivalent to 4 mcg (0.004 mg) of dexmedetomidine; 9 mg sodium chloride, USP; 483 mcg sodium acetate trihydrate, USP; 87 mcg glacial acetic acid, USP and water for injection, USP. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>70121-1716-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1716-3) / 1 BAG in 1 POUCH / 250 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1716-03</NDC11Code>
<ProductNDC>70121-1716</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esmolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Esmolol Hydrochloride In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20221216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216603</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ESMOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esmolol hydrochloride in sodium chloride injection is a beta adrenergic blocker indicated for the short-term treatment of: : 1 Control of ventricular rate in supraventricular tachycardia including atrial fibrillation and atrial flutter and control of heart rate in non-compensatory sinus tachycardia. (1.1), 2 Control of perioperative tachycardia and hypertension. (1.2).</IndicationAndUsage>
<Description>Esmolol hydrochloride in sodium chloride injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride, USP is: 1 4-[2-Hydroxy –3-[(1-methylethyl)amino]-propoxy]benzenepropanoic acid methyl ester hydrochloride and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>70121-1717-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1717-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1717-03</NDC11Code>
<ProductNDC>70121-1717</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Esmolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Esmolol Hydrochloride In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20221216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216603</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ESMOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Esmolol hydrochloride in sodium chloride injection is a beta adrenergic blocker indicated for the short-term treatment of: : 1 Control of ventricular rate in supraventricular tachycardia including atrial fibrillation and atrial flutter and control of heart rate in non-compensatory sinus tachycardia. (1.1), 2 Control of perioperative tachycardia and hypertension. (1.2).</IndicationAndUsage>
<Description>Esmolol hydrochloride in sodium chloride injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes). Esmolol hydrochloride, USP is: 1 4-[2-Hydroxy –3-[(1-methylethyl)amino]-propoxy]benzenepropanoic acid methyl ester hydrochloride and has the following structure:.</Description>
</NDC>
<NDC>
<NDCCode>70121-1720-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1720-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1720-03</NDC11Code>
<ProductNDC>70121-1720</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water For</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216597</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium sulfate in water for injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium sulfate in water for injection is a sterile, nonpyrogenic, clear and colorless solution of magnesium sulfate heptahydrate, USP in water for injection, USP. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% concentration. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium sulfate heptahydrate is chemically designated as MgSO4 7H2O and its molecular weight is 246.5 g/mol and having below structural formula. Magnesium sulfate heptahydrate, USP is white or almost white crystalline powder or brilliant colorless crystals which is freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96%). Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non polyvinylchloride.</Description>
</NDC>
<NDC>
<NDCCode>70121-1732-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1732-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1732-03</NDC11Code>
<ProductNDC>70121-1732</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20230317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216605</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70121-1733-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1733-3) / 1 BAG in 1 POUCH / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1733-03</NDC11Code>
<ProductNDC>70121-1733</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20230317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216605</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70121-1734-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1734-3) / 1 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1734-03</NDC11Code>
<ProductNDC>70121-1734</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20230317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216605</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70121-1735-3</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (70121-1735-3) / 1 BAG in 1 POUCH / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>70121-1735-03</NDC11Code>
<ProductNDC>70121-1735</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20230317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216605</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine hydrochloride injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: Epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: Epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride, USP as the active pharmaceutical ingredient. Ropivacaine hydrochloride, USP is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride, USP is chemically described as (S)-(–)-1-propylpiperidine-2-carboxylic acid (2,6-dimethylphenyl)amide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. Molecular Formula: C17H26N2OHClH2O. Molecular Weight: 328.88 g/mol. At 25 °C ropivacaine hydrochloride, USP has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine hydrochloride, USP has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution, available in single-dose infusion bag in 2 mg/mL (0.2%) and 5 mg/mL (0.5%) concentrations. Each mL contains ropivacaine hydrochloride USP, 2 mg or 5 mg (equivalent to 2.12 mg or 5.29 mg ropivacaine hydrochloride monohydrate) and sodium chloride 8.6 mg or 8.0 mg; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70121-2715-2</NDCCode>
<PackageDescription>10 AMPULE in 1 BOX (70121-2715-2) / 10 mL in 1 AMPULE (70121-2715-3) </PackageDescription>
<NDC11Code>70121-2715-02</NDC11Code>
<ProductNDC>70121-2715</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylene Blue</ProprietaryName>
<NonProprietaryName>Methylene Blue</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250303</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216955</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>METHYLENE BLUE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Oxidation-Reduction Activity [MoA], Oxidation-Reduction Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylene blue injection, USP is indicated for the treatment of pediatric and adult patients with acquired methemoglobinemia.</IndicationAndUsage>
<Description>Methylene blue is an oxidation-reduction agent. Its chemical name is 3,7-bis(dimethylamino)phenothiazin-5-ium, chloride hydrate. The molecular formula of methylene blue injection, USP is C16H18ClN3S.xH2O and its molecular weight of 319.86 g/mol for the anhydrous form. The structural formula of Methylene blue is. Methylene blue injection, USP is a sterile solution intended for intravenous administration. Each mL of solution contains 5 mg methylene blue and water for injection. Methylene blue injection, USP is a clear dark blue solution with a pH value between 3.0 and 4.5. The osmolality is between 10 and 15 mOsm/kg. Methylene blue injection, USP strength is expressed in terms of trihydrate.</Description>
</NDC>
<NDC>
<NDCCode>76420-737-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76420-737-01) * 25 VIAL in 1 CARTON (70121-1049-5) / 1 mL in 1 VIAL * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1162-18) * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-164-02) / 2 mL in 1 VIAL, SINGLE-DOSE * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 5 mL in 1 POUCH</PackageDescription>
<NDC11Code>76420-0737-01</NDC11Code>
<ProductNDC>76420-737</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mlk F4-c</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride, Lidocaine Hydrochloride, Triamcinolone Acetonide, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76420-739-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76420-739-01) * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-162-05) / 5 mL in 1 VIAL, SINGLE-DOSE * 25 VIAL, SINGLE-DOSE in 1 CARTON (70121-1573-5) / 1 mL in 1 VIAL, SINGLE-DOSE * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * 5 mL in 1 POUCH * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>76420-0739-01</NDC11Code>
<ProductNDC>76420-739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dyural Lm- C</ProprietaryName>
<NonProprietaryName>Methylprednisolone Acetate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76420-745-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76420-745-01) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1159-18) * 5 mL in 1 POUCH * 10 VIAL, GLASS in 1 BOX (0407-1412-10) / 10 mL in 1 VIAL, GLASS * 25 POUCH in 1 CARTON (54365-400-32) / 1 APPLICATOR in 1 POUCH / 3 mL in 1 APPLICATOR * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-162-05) / 5 mL in 1 VIAL, SINGLE-DOSE * 1 VIAL, SINGLE-DOSE in 1 CARTON (70121-1574-1) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>76420-0745-01</NDC11Code>
<ProductNDC>76420-745</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dyural 80 Lm-c</ProprietaryName>
<NonProprietaryName>Methylprednisolone Acetate, Lidocaine Hydrochloride, Bupivacaine Hydrochloride, Iohexol, Isopropyl Alcohol, Chlorhexidine Gluconate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0220-2428-41</NDCCode>
<PackageDescription>80 PELLET in 1 TUBE (0220-2428-41) </PackageDescription>
<NDC11Code>00220-2428-41</NDC11Code>
<ProductNDC>0220-2428</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hekla Lava</ProprietaryName>
<NonProprietaryName>Hekla Lava</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>HEKLA LAVA</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Toothache*.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>22840-2428-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-2428-2) </PackageDescription>
<NDC11Code>22840-2428-02</NDC11Code>
<ProductNDC>22840-2428</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Oneseed Juniper Pollen</ProprietaryName>
<NonProprietaryName>Juniperus Monosperma</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>JUNIPERUS MONOSPERMA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>22840-2428-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-2428-4) </PackageDescription>
<NDC11Code>22840-2428-04</NDC11Code>
<ProductNDC>22840-2428</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Oneseed Juniper Pollen</ProprietaryName>
<NonProprietaryName>Juniperus Monosperma</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>JUNIPERUS MONOSPERMA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>36987-2428-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-2428-1)</PackageDescription>
<NDC11Code>36987-2428-01</NDC11Code>
<ProductNDC>36987-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102196</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>36987-2428-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2428-2)</PackageDescription>
<NDC11Code>36987-2428-02</NDC11Code>
<ProductNDC>36987-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102196</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>36987-2428-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-2428-4)</PackageDescription>
<NDC11Code>36987-2428-04</NDC11Code>
<ProductNDC>36987-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Kentucky (june) Bluegrass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102196</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>37662-2428-1</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-2428-1) </PackageDescription>
<NDC11Code>37662-2428-01</NDC11Code>
<ProductNDC>37662-2428</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rhus Toxicodendron</ProprietaryName>
<NonProprietaryName>Rhus Toxicodendron</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230119</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>TOXICODENDRON PUBESCENS LEAF</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2428-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-2428-2) </PackageDescription>
<NDC11Code>37662-2428-02</NDC11Code>
<ProductNDC>37662-2428</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rhus Toxicodendron</ProprietaryName>
<NonProprietaryName>Rhus Toxicodendron</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230119</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>TOXICODENDRON PUBESCENS LEAF</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-2428-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-2428-4) </PackageDescription>
<NDC11Code>37662-2428-04</NDC11Code>
<ProductNDC>37662-2428</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rhus Toxicodendron</ProprietaryName>
<NonProprietaryName>Rhus Toxicodendron</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230119</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>TOXICODENDRON PUBESCENS LEAF</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-2428-0</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (50090-2428-0) </PackageDescription>
<NDC11Code>50090-2428-00</NDC11Code>
<ProductNDC>50090-2428</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018716</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>