{
"NDC": [
{
"NDCCode": "70257-054-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70257-054-51) / 5 mL in 1 VIAL, GLASS (70257-054-05) ",
"NDC11Code": "70257-0054-51",
"ProductNDC": "70257-054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hepagam B",
"NonProprietaryName": "Human Hepatitis B Virus Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180620",
"EndMarketingDate": "20240430",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125035",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "312",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2024-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180620",
"EndMarketingDatePackage": "20240430",
"SamplePackage": "N"
},
{
"NDCCode": "70257-051-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70257-051-51) > 5 mL in 1 VIAL, GLASS (70257-051-05) ",
"NDC11Code": "70257-0051-51",
"ProductNDC": "70257-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hepagam B",
"NonProprietaryName": "Hepatitis B Immune Globulin Intravenous (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125035",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "312",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.",
"Description": "HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV11. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [see Dosage Forms and Strengths (3)]."
},
{
"NDCCode": "70257-052-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70257-052-51) > 1 mL in 1 VIAL, GLASS (70257-052-11) ",
"NDC11Code": "70257-0052-51",
"ProductNDC": "70257-052",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hepagam B",
"NonProprietaryName": "Hepatitis B Immune Globulin Intravenous (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125035",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "312",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.",
"Description": "HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV11. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [see Dosage Forms and Strengths (3)]."
},
{
"NDCCode": "70257-053-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70257-053-51) / 1 mL in 1 VIAL, GLASS (70257-053-11) ",
"NDC11Code": "70257-0053-51",
"ProductNDC": "70257-053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hepagam B",
"NonProprietaryName": "Human Hepatitis B Virus Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180620",
"EndMarketingDate": "20240430",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125035",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "312",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2024-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180620",
"EndMarketingDatePackage": "20240430",
"SamplePackage": "N"
},
{
"NDCCode": "70257-126-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70257-126-51) / 1.2 mL in 1 VIAL, GLASS (70257-126-11) ",
"NDC11Code": "70257-0126-51",
"ProductNDC": "70257-126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Varizig",
"NonProprietaryName": "Human Varicella-zoster Immune Globulin",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125430",
"LabelerName": "Saol Therapeutics",
"SubstanceName": "HUMAN VARICELLA-ZOSTER IMMUNE GLOBULIN",
"StrengthNumber": "125",
"StrengthUnit": "[iU]/1.2mL",
"Status": "Deprecated",
"LastUpdate": "2025-09-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "VARIZIG® [Varicella Zoster Immune Globulin (Human)] is indicated for post-exposure prophylaxis of varicella in high risk individuals. High risk groups include: 1 immunocompromised children and adults,, 2 newborns of mothers with varicella shortly before or after delivery, , 3 premature infants,, 4 neonates and infants less than one year of age, , 5 adults without evidence of immunity, , 6 pregnant women. .",
"Description": "VARIZIG [Varicella Zoster Immune Globulin (Human)] is a solvent/detergent-treated sterile liquid preparation of purified human immune globulin G (IgG) containing antibodies to varicella zoster virus (anti-VZV). VZV is the causative agent of chickenpox. VARIZIG is prepared from plasma donated by healthy, screened donors with high titers of antibodies to VZV, which is purified by an anion-exchange column chromatography manufacturing method. This donor selection process includes donors with high anti-VZV titers due to recent natural infection by VZV, or due to recurrent zoster infection (shingles). VARIZIG is intended for single use and should be administered intramuscularly [see 2 DOSAGE AND ADMINISTRATION]. The product potency is expressed in international units by comparison to the World Health Organization (WHO) international reference preparation for anti-VZV immune globulin. Each vial contains 125 international units of anti-VZV. VARIZIG is formulated with 10% maltose and 0.03% polysorbate 80. VARIZIG has a pH of 5.0 – 6.5 and contains no preservative. The presence of anti-Protein S antibodies has been reported to arise transiently in patients after VZV infection (4). Low levels of anti-Protein S antibodies have been reported in VARIZIG. The source plasma used in the manufacture of this product was tested by FDA licensed nucleic acid testing (NAT) for human immunodeficiency virus-1 (HIV-1), hepatitis B virus (HBV) and hepatitis C virus (HCV) and found to be negative. Plasma also was tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing; the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent/detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as HBV, HCV and HIV-1. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 2. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general."
},
{
"NDCCode": "70257-300-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (70257-300-51) > 1 INJECTION in 1 VIAL, SINGLE-DOSE (70257-300-13) ",
"NDC11Code": "70257-0300-51",
"ProductNDC": "70257-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Rho (d) Immune Globulin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "15000",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-09-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho® SDF is a Rho(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rho(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rho(D)-negative patients.",
"Description": "WinRho® SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rho(D) antigen (D antigen). WinRho® SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho® SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rho(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rho(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rho(D) to effectively suppress the immunizing potential of approximately 17 mL of Rho(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho® SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "70257-310-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (70257-310-51) / 1 LIQUID in 1 VIAL, SINGLE-DOSE (70257-310-04) ",
"NDC11Code": "70257-0310-51",
"ProductNDC": "70257-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Rho (d) Immune Globulin",
"DosageFormName": "LIQUID",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190301",
"EndMarketingDate": "20250831",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "5000",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190301",
"EndMarketingDatePackage": "20250831",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.",
"Description": "WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "70257-330-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (70257-330-51) / 1 LIQUID in 1 VIAL, SINGLE-DOSE (70257-330-11) ",
"NDC11Code": "70257-0330-51",
"ProductNDC": "70257-330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Rho (d) Immune Globulin",
"DosageFormName": "LIQUID",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190301",
"EndMarketingDate": "20250531",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "1500",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190301",
"EndMarketingDatePackage": "20250531",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.",
"Description": "WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "70257-350-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (70257-350-51) / 1 LIQUID in 1 VIAL, SINGLE-DOSE (70257-350-02) ",
"NDC11Code": "70257-0350-51",
"ProductNDC": "70257-350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Rho (d) Immune Globulin",
"DosageFormName": "LIQUID",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190301",
"EndMarketingDate": "20250531",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "2500",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190301",
"EndMarketingDatePackage": "20250531",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.",
"Description": "WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "70257-532-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70257-532-51) / 50 mL in 1 VIAL, GLASS (70257-532-50) ",
"NDC11Code": "70257-0532-51",
"ProductNDC": "70257-532",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cytogam",
"NonProprietaryName": "Human Cytomegalovirus Immune Globulin",
"DosageFormName": "LIQUID",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201030",
"EndMarketingDate": "20240110",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103189",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN CYTOMEGALOVIRUS IMMUNE GLOBULIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20201030",
"EndMarketingDatePackage": "20240110",
"SamplePackage": "N",
"IndicationAndUsage": "Cytomegalovirus Immune Globulin Intravenous (Human) is indicated for the prophylaxis of cytomegalovirus disease associated with transplantation of kidney, lung, liver, pancreas and heart. In transplants of these organs other than kidney from CMV seropositive donors into seronegative recipients, prophylactic CMV-IGIV should be considered in combination with ganciclovir.",
"Description": "CYTOGAM, Cytomegalovirus Immune Globulin Intravenous (Human) (CMV-IGIV), is an immunoglobulin G (IgG) containing a standardized amount of antibody to Cytomegalovirus (CMV). CMV-IGIV is formulated in final vial as a sterile liquid. The globulin is stabilized with 5% sucrose and 1% Albumin (Human). CYTOGAM contains no preservative. The purified immunoglobulin is derived from pooled adult human plasma selected for high titers of antibody for Cytomegalovirus (CMV).1 Source material for fractionation may be obtained from another U.S. licensed manufacturer. Pooled plasma was fractionated by ethanol precipitation of the proteins according to Cohn Methods 6 and 9, modified to yield a product suitable for intravenous administration. A widely utilized solvent-detergent viral inactivation process is also used.2 Certain manufacturing operations may be performed by other firms. Each milliliter contains: 50 ± 10 mg of immunoglobulin, primarily IgG, and trace amounts of IgA and IgM; 50 mg of sucrose; 10 mg of Albumin (Human). The sodium content is 20-30 mEq per liter, i.e., 0.4-0.6 mEq per 20 mL or 1.0-1.5 mEq per 50 mL. The solution should appear colorless and translucent."
},
{
"NDCCode": "45802-054-05",
"PackageDescription": "454 g in 1 JAR (45802-054-05) ",
"NDC11Code": "45802-0054-05",
"ProductNDC": "45802-054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087385",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070705",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis (oxy)]-,(11β,16α)-. C24H31FO6, M.W. 434.51; CAS Reg. No. 76-25-5. Each gram of Triamcinolone Acetonide Ointment USP, 0.025%, 0.1% or 0.5% contains 0.25 mg, 1 mg or 5 mg triamcinolone acetonide, respectively, in an ointment base of light mineral oil and white petrolatum."
},
{
"NDCCode": "45802-054-35",
"PackageDescription": "1 TUBE in 1 CARTON (45802-054-35) / 15 g in 1 TUBE",
"NDC11Code": "45802-0054-35",
"ProductNDC": "45802-054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087385",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060512",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis (oxy)]-,(11β,16α)-. C24H31FO6, M.W. 434.51; CAS Reg. No. 76-25-5. Each gram of Triamcinolone Acetonide Ointment USP, 0.025%, 0.1% or 0.5% contains 0.25 mg, 1 mg or 5 mg triamcinolone acetonide, respectively, in an ointment base of light mineral oil and white petrolatum."
},
{
"NDCCode": "45802-054-36",
"PackageDescription": "1 TUBE in 1 CARTON (45802-054-36) / 80 g in 1 TUBE",
"NDC11Code": "45802-0054-36",
"ProductNDC": "45802-054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20060512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087385",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070905",
"SamplePackage": "N",
"IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis (oxy)]-,(11β,16α)-. C24H31FO6, M.W. 434.51; CAS Reg. No. 76-25-5. Each gram of Triamcinolone Acetonide Ointment USP, 0.025%, 0.1% or 0.5% contains 0.25 mg, 1 mg or 5 mg triamcinolone acetonide, respectively, in an ointment base of light mineral oil and white petrolatum."
},
{
"NDCCode": "70257-412-87",
"PackageDescription": "90 PACKET in 1 BOTTLE, UNIT-DOSE (70257-412-87) / 1 GRANULE in 1 PACKET",
"NDC11Code": "70257-0412-87",
"ProductNDC": "70257-412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20211122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Saol Therapeutics Inc",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20211122",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2. Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
},
{
"NDCCode": "70257-414-87",
"PackageDescription": "90 PACKET in 1 BOTTLE, UNIT-DOSE (70257-414-87) / 1 GRANULE in 1 PACKET",
"NDC11Code": "70257-0414-87",
"ProductNDC": "70257-414",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20211122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Saol Therapeutics Inc",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20211122",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2. Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
},
{
"NDCCode": "70257-416-87",
"PackageDescription": "90 PACKET in 1 BOTTLE, UNIT-DOSE (70257-416-87) / 1 GRANULE in 1 PACKET",
"NDC11Code": "70257-0416-87",
"ProductNDC": "70257-416",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20211122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Saol Therapeutics Inc",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20211122",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2. Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
},
{
"NDCCode": "70257-560-01",
"PackageDescription": "1 AMPULE in 1 BOX (70257-560-01) > 20 mL in 1 AMPULE (70257-560-20) ",
"NDC11Code": "70257-0560-01",
"ProductNDC": "70257-560",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lioresal (baclofen)",
"NonProprietaryName": "Baclofen",
"DosageFormName": "INJECTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20220612",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020075",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220612",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.",
"Description": "LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE."
},
{
"NDCCode": "70257-560-02",
"PackageDescription": "2 AMPULE in 1 BOX (70257-560-02) > 20 mL in 1 AMPULE (70257-560-20) ",
"NDC11Code": "70257-0560-02",
"ProductNDC": "70257-560",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lioresal (baclofen)",
"NonProprietaryName": "Baclofen",
"DosageFormName": "INJECTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20220612",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020075",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220612",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.",
"Description": "LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE."
},
{
"NDCCode": "70257-561-02",
"PackageDescription": "2 AMPULE in 1 BOX (70257-561-02) > 5 mL in 1 AMPULE (70257-561-05) ",
"NDC11Code": "70257-0561-02",
"ProductNDC": "70257-561",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lioresal (baclofen)",
"NonProprietaryName": "Baclofen",
"DosageFormName": "INJECTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20220612",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020075",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220612",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.",
"Description": "LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE."
},
{
"NDCCode": "70257-562-55",
"PackageDescription": "5 AMPULE in 1 BOX (70257-562-55) > 1 mL in 1 AMPULE (70257-562-11) ",
"NDC11Code": "70257-0562-55",
"ProductNDC": "70257-562",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lioresal (baclofen)",
"NonProprietaryName": "Baclofen",
"DosageFormName": "INJECTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20220612",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020075",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "BACLOFEN",
"StrengthNumber": ".05",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220612",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.",
"Description": "LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE."
},
{
"NDCCode": "70257-563-01",
"PackageDescription": "1 AMPULE in 1 BOX (70257-563-01) > 20 mL in 1 AMPULE (70257-563-20) ",
"NDC11Code": "70257-0563-01",
"ProductNDC": "70257-563",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lioresal (baclofen)",
"NonProprietaryName": "Baclofen",
"DosageFormName": "INJECTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20220612",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020075",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "40",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220612",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.",
"Description": "LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE."
},
{
"NDCCode": "70257-563-02",
"PackageDescription": "2 AMPULE in 1 BOX (70257-563-02) > 20 mL in 1 AMPULE (70257-563-20) ",
"NDC11Code": "70257-0563-02",
"ProductNDC": "70257-563",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lioresal (baclofen)",
"NonProprietaryName": "Baclofen",
"DosageFormName": "INJECTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20220612",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020075",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "40",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220612",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.",
"Description": "LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE."
},
{
"NDCCode": "0074-1050-01",
"PackageDescription": "1 SYRINGE in 1 CARTON (0074-1050-01) / 1 mL in 1 SYRINGE",
"NDC11Code": "00074-1050-01",
"ProductNDC": "0074-1050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20210426",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "RISANKIZUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210426",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1050-70",
"PackageDescription": "1 SYRINGE in 1 CARTON (0074-1050-70) / 1 mL in 1 SYRINGE",
"NDC11Code": "00074-1050-70",
"ProductNDC": "0074-1050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20210426",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "RISANKIZUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210426",
"SamplePackage": "Y",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1065-01",
"PackageDescription": "1 KIT in 1 CARTON (0074-1065-01) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) ",
"NDC11Code": "00074-1065-01",
"ProductNDC": "0074-1065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220923",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220923",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1065-02",
"PackageDescription": "1 KIT in 1 CARTON (0074-1065-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) ",
"NDC11Code": "00074-1065-02",
"ProductNDC": "0074-1065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220923",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220923",
"SamplePackage": "Y",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1070-01",
"PackageDescription": "1 KIT in 1 CARTON (0074-1070-01) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) ",
"NDC11Code": "00074-1070-01",
"ProductNDC": "0074-1070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220616",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220616",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-1070-02",
"PackageDescription": "1 KIT in 1 CARTON (0074-1070-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) ",
"NDC11Code": "00074-1070-02",
"ProductNDC": "0074-1070",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220616",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220616",
"SamplePackage": "Y",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-2100-01",
"PackageDescription": "1 SYRINGE in 1 CARTON (0074-2100-01) / 1 mL in 1 SYRINGE",
"NDC11Code": "00074-2100-01",
"ProductNDC": "0074-2100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20210426",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "RISANKIZUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210426",
"SamplePackage": "N",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
},
{
"NDCCode": "0074-2100-70",
"PackageDescription": "1 SYRINGE in 1 CARTON (0074-2100-70) / 1 mL in 1 SYRINGE",
"NDC11Code": "00074-2100-70",
"ProductNDC": "0074-2100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Skyrizi",
"NonProprietaryName": "Risankizumab-rzaa",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20210426",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761105",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "RISANKIZUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210426",
"SamplePackage": "Y",
"IndicationAndUsage": "SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).",
"Description": "Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70257-054-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70257-054-51) / 5 mL in 1 VIAL, GLASS (70257-054-05) </PackageDescription>
<NDC11Code>70257-0054-51</NDC11Code>
<ProductNDC>70257-054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hepagam B</ProprietaryName>
<NonProprietaryName>Human Hepatitis B Virus Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180620</StartMarketingDate>
<EndMarketingDate>20240430</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125035</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>312</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180620</StartMarketingDatePackage>
<EndMarketingDatePackage>20240430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70257-051-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70257-051-51) > 5 mL in 1 VIAL, GLASS (70257-051-05) </PackageDescription>
<NDC11Code>70257-0051-51</NDC11Code>
<ProductNDC>70257-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hepagam B</ProprietaryName>
<NonProprietaryName>Hepatitis B Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125035</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>312</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.</IndicationAndUsage>
<Description>HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV11. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [see Dosage Forms and Strengths (3)].</Description>
</NDC>
<NDC>
<NDCCode>70257-052-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70257-052-51) > 1 mL in 1 VIAL, GLASS (70257-052-11) </PackageDescription>
<NDC11Code>70257-0052-51</NDC11Code>
<ProductNDC>70257-052</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hepagam B</ProprietaryName>
<NonProprietaryName>Hepatitis B Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125035</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>312</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.</IndicationAndUsage>
<Description>HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV11. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [see Dosage Forms and Strengths (3)].</Description>
</NDC>
<NDC>
<NDCCode>70257-053-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70257-053-51) / 1 mL in 1 VIAL, GLASS (70257-053-11) </PackageDescription>
<NDC11Code>70257-0053-51</NDC11Code>
<ProductNDC>70257-053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hepagam B</ProprietaryName>
<NonProprietaryName>Human Hepatitis B Virus Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180620</StartMarketingDate>
<EndMarketingDate>20240430</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125035</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>312</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180620</StartMarketingDatePackage>
<EndMarketingDatePackage>20240430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70257-126-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70257-126-51) / 1.2 mL in 1 VIAL, GLASS (70257-126-11) </PackageDescription>
<NDC11Code>70257-0126-51</NDC11Code>
<ProductNDC>70257-126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Varizig</ProprietaryName>
<NonProprietaryName>Human Varicella-zoster Immune Globulin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125430</ApplicationNumber>
<LabelerName>Saol Therapeutics</LabelerName>
<SubstanceName>HUMAN VARICELLA-ZOSTER IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>[iU]/1.2mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-09-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VARIZIG® [Varicella Zoster Immune Globulin (Human)] is indicated for post-exposure prophylaxis of varicella in high risk individuals. High risk groups include: 1 immunocompromised children and adults,, 2 newborns of mothers with varicella shortly before or after delivery, , 3 premature infants,, 4 neonates and infants less than one year of age, , 5 adults without evidence of immunity, , 6 pregnant women. .</IndicationAndUsage>
<Description>VARIZIG [Varicella Zoster Immune Globulin (Human)] is a solvent/detergent-treated sterile liquid preparation of purified human immune globulin G (IgG) containing antibodies to varicella zoster virus (anti-VZV). VZV is the causative agent of chickenpox. VARIZIG is prepared from plasma donated by healthy, screened donors with high titers of antibodies to VZV, which is purified by an anion-exchange column chromatography manufacturing method. This donor selection process includes donors with high anti-VZV titers due to recent natural infection by VZV, or due to recurrent zoster infection (shingles). VARIZIG is intended for single use and should be administered intramuscularly [see 2 DOSAGE AND ADMINISTRATION]. The product potency is expressed in international units by comparison to the World Health Organization (WHO) international reference preparation for anti-VZV immune globulin. Each vial contains 125 international units of anti-VZV. VARIZIG is formulated with 10% maltose and 0.03% polysorbate 80. VARIZIG has a pH of 5.0 – 6.5 and contains no preservative. The presence of anti-Protein S antibodies has been reported to arise transiently in patients after VZV infection (4). Low levels of anti-Protein S antibodies have been reported in VARIZIG. The source plasma used in the manufacture of this product was tested by FDA licensed nucleic acid testing (NAT) for human immunodeficiency virus-1 (HIV-1), hepatitis B virus (HBV) and hepatitis C virus (HCV) and found to be negative. Plasma also was tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing; the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent/detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as HBV, HCV and HIV-1. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 2. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general.</Description>
</NDC>
<NDC>
<NDCCode>70257-300-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70257-300-51) > 1 INJECTION in 1 VIAL, SINGLE-DOSE (70257-300-13) </PackageDescription>
<NDC11Code>70257-0300-51</NDC11Code>
<ProductNDC>70257-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Rho (d) Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>15000</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho® SDF is a Rho(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rho(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rho(D)-negative patients.</IndicationAndUsage>
<Description>WinRho® SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rho(D) antigen (D antigen). WinRho® SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho® SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rho(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rho(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rho(D) to effectively suppress the immunizing potential of approximately 17 mL of Rho(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho® SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>70257-310-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70257-310-51) / 1 LIQUID in 1 VIAL, SINGLE-DOSE (70257-310-04) </PackageDescription>
<NDC11Code>70257-0310-51</NDC11Code>
<ProductNDC>70257-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Rho (d) Immune Globulin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<EndMarketingDate>20250831</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<EndMarketingDatePackage>20250831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.</IndicationAndUsage>
<Description>WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>70257-330-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70257-330-51) / 1 LIQUID in 1 VIAL, SINGLE-DOSE (70257-330-11) </PackageDescription>
<NDC11Code>70257-0330-51</NDC11Code>
<ProductNDC>70257-330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Rho (d) Immune Globulin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<EndMarketingDate>20250531</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>1500</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<EndMarketingDatePackage>20250531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.</IndicationAndUsage>
<Description>WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>70257-350-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70257-350-51) / 1 LIQUID in 1 VIAL, SINGLE-DOSE (70257-350-02) </PackageDescription>
<NDC11Code>70257-0350-51</NDC11Code>
<ProductNDC>70257-350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Rho (d) Immune Globulin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<EndMarketingDate>20250531</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>2500</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<EndMarketingDatePackage>20250531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.</IndicationAndUsage>
<Description>WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>70257-532-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70257-532-51) / 50 mL in 1 VIAL, GLASS (70257-532-50) </PackageDescription>
<NDC11Code>70257-0532-51</NDC11Code>
<ProductNDC>70257-532</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cytogam</ProprietaryName>
<NonProprietaryName>Human Cytomegalovirus Immune Globulin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201030</StartMarketingDate>
<EndMarketingDate>20240110</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103189</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN CYTOMEGALOVIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20201030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240110</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cytomegalovirus Immune Globulin Intravenous (Human) is indicated for the prophylaxis of cytomegalovirus disease associated with transplantation of kidney, lung, liver, pancreas and heart. In transplants of these organs other than kidney from CMV seropositive donors into seronegative recipients, prophylactic CMV-IGIV should be considered in combination with ganciclovir.</IndicationAndUsage>
<Description>CYTOGAM, Cytomegalovirus Immune Globulin Intravenous (Human) (CMV-IGIV), is an immunoglobulin G (IgG) containing a standardized amount of antibody to Cytomegalovirus (CMV). CMV-IGIV is formulated in final vial as a sterile liquid. The globulin is stabilized with 5% sucrose and 1% Albumin (Human). CYTOGAM contains no preservative. The purified immunoglobulin is derived from pooled adult human plasma selected for high titers of antibody for Cytomegalovirus (CMV).1 Source material for fractionation may be obtained from another U.S. licensed manufacturer. Pooled plasma was fractionated by ethanol precipitation of the proteins according to Cohn Methods 6 and 9, modified to yield a product suitable for intravenous administration. A widely utilized solvent-detergent viral inactivation process is also used.2 Certain manufacturing operations may be performed by other firms. Each milliliter contains: 50 ± 10 mg of immunoglobulin, primarily IgG, and trace amounts of IgA and IgM; 50 mg of sucrose; 10 mg of Albumin (Human). The sodium content is 20-30 mEq per liter, i.e., 0.4-0.6 mEq per 20 mL or 1.0-1.5 mEq per 50 mL. The solution should appear colorless and translucent.</Description>
</NDC>
<NDC>
<NDCCode>45802-054-05</NDCCode>
<PackageDescription>454 g in 1 JAR (45802-054-05) </PackageDescription>
<NDC11Code>45802-0054-05</NDC11Code>
<ProductNDC>45802-054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087385</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis (oxy)]-,(11β,16α)-. C24H31FO6, M.W. 434.51; CAS Reg. No. 76-25-5. Each gram of Triamcinolone Acetonide Ointment USP, 0.025%, 0.1% or 0.5% contains 0.25 mg, 1 mg or 5 mg triamcinolone acetonide, respectively, in an ointment base of light mineral oil and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>45802-054-35</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-054-35) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0054-35</NDC11Code>
<ProductNDC>45802-054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087385</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis (oxy)]-,(11β,16α)-. C24H31FO6, M.W. 434.51; CAS Reg. No. 76-25-5. Each gram of Triamcinolone Acetonide Ointment USP, 0.025%, 0.1% or 0.5% contains 0.25 mg, 1 mg or 5 mg triamcinolone acetonide, respectively, in an ointment base of light mineral oil and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>45802-054-36</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-054-36) / 80 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0054-36</NDC11Code>
<ProductNDC>45802-054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20060512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087385</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070905</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3,20-dione, 9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis (oxy)]-,(11β,16α)-. C24H31FO6, M.W. 434.51; CAS Reg. No. 76-25-5. Each gram of Triamcinolone Acetonide Ointment USP, 0.025%, 0.1% or 0.5% contains 0.25 mg, 1 mg or 5 mg triamcinolone acetonide, respectively, in an ointment base of light mineral oil and white petrolatum.</Description>
</NDC>
<NDC>
<NDCCode>70257-412-87</NDCCode>
<PackageDescription>90 PACKET in 1 BOTTLE, UNIT-DOSE (70257-412-87) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>70257-0412-87</NDC11Code>
<ProductNDC>70257-412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2. Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
<NDC>
<NDCCode>70257-414-87</NDCCode>
<PackageDescription>90 PACKET in 1 BOTTLE, UNIT-DOSE (70257-414-87) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>70257-0414-87</NDC11Code>
<ProductNDC>70257-414</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2. Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
<NDC>
<NDCCode>70257-416-87</NDCCode>
<PackageDescription>90 PACKET in 1 BOTTLE, UNIT-DOSE (70257-416-87) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>70257-0416-87</NDC11Code>
<ProductNDC>70257-416</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2. Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
<NDC>
<NDCCode>70257-560-01</NDCCode>
<PackageDescription>1 AMPULE in 1 BOX (70257-560-01) > 20 mL in 1 AMPULE (70257-560-20) </PackageDescription>
<NDC11Code>70257-0560-01</NDC11Code>
<ProductNDC>70257-560</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lioresal (baclofen)</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20220612</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020075</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220612</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.</IndicationAndUsage>
<Description>LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
</NDC>
<NDC>
<NDCCode>70257-560-02</NDCCode>
<PackageDescription>2 AMPULE in 1 BOX (70257-560-02) > 20 mL in 1 AMPULE (70257-560-20) </PackageDescription>
<NDC11Code>70257-0560-02</NDC11Code>
<ProductNDC>70257-560</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lioresal (baclofen)</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20220612</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020075</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220612</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.</IndicationAndUsage>
<Description>LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
</NDC>
<NDC>
<NDCCode>70257-561-02</NDCCode>
<PackageDescription>2 AMPULE in 1 BOX (70257-561-02) > 5 mL in 1 AMPULE (70257-561-05) </PackageDescription>
<NDC11Code>70257-0561-02</NDC11Code>
<ProductNDC>70257-561</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lioresal (baclofen)</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20220612</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020075</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220612</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.</IndicationAndUsage>
<Description>LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
</NDC>
<NDC>
<NDCCode>70257-562-55</NDCCode>
<PackageDescription>5 AMPULE in 1 BOX (70257-562-55) > 1 mL in 1 AMPULE (70257-562-11) </PackageDescription>
<NDC11Code>70257-0562-55</NDC11Code>
<ProductNDC>70257-562</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lioresal (baclofen)</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20220612</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020075</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220612</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.</IndicationAndUsage>
<Description>LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
</NDC>
<NDC>
<NDCCode>70257-563-01</NDCCode>
<PackageDescription>1 AMPULE in 1 BOX (70257-563-01) > 20 mL in 1 AMPULE (70257-563-20) </PackageDescription>
<NDC11Code>70257-0563-01</NDC11Code>
<ProductNDC>70257-563</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lioresal (baclofen)</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20220612</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020075</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220612</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.</IndicationAndUsage>
<Description>LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
</NDC>
<NDC>
<NDCCode>70257-563-02</NDCCode>
<PackageDescription>2 AMPULE in 1 BOX (70257-563-02) > 20 mL in 1 AMPULE (70257-563-20) </PackageDescription>
<NDC11Code>70257-0563-02</NDC11Code>
<ProductNDC>70257-563</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lioresal (baclofen)</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20220612</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020075</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220612</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIORESAL INTRATHECAL (baclofen injection) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of LIORESAL INTRATHECAL via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. LIORESAL INTRATHECAL is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of LIORESAL INTRATHECAL into the intrathecal space.</IndicationAndUsage>
<Description>LIORESAL INTRATHECAL (baclofen injection) is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LIORESAL INTRATHECAL is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of LIORESAL INTRATHECAL contains baclofen U. S. P. 50 mcg, 500 mcg or 2000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 - 7.0. Each ampule is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
</NDC>
<NDC>
<NDCCode>0074-1050-01</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0074-1050-01) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00074-1050-01</NDC11Code>
<ProductNDC>0074-1050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210426</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>RISANKIZUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1050-70</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0074-1050-70) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00074-1050-70</NDC11Code>
<ProductNDC>0074-1050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210426</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>RISANKIZUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210426</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1065-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1065-01) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) </PackageDescription>
<NDC11Code>00074-1065-01</NDC11Code>
<ProductNDC>0074-1065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220923</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1065-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1065-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-02) * 1.2 mL in 1 CARTRIDGE (0074-1066-01) </PackageDescription>
<NDC11Code>00074-1065-02</NDC11Code>
<ProductNDC>0074-1065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220923</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220923</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1070-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1070-01) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) </PackageDescription>
<NDC11Code>00074-1070-01</NDC11Code>
<ProductNDC>0074-1070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220616</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220616</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-1070-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0074-1070-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-02) * 2.4 mL in 1 CARTRIDGE (0074-1069-01) </PackageDescription>
<NDC11Code>00074-1070-02</NDC11Code>
<ProductNDC>0074-1070</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220616</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220616</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-2100-01</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0074-2100-01) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00074-2100-01</NDC11Code>
<ProductNDC>0074-2100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210426</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>RISANKIZUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
<NDC>
<NDCCode>0074-2100-70</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0074-2100-70) / 1 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00074-2100-70</NDC11Code>
<ProductNDC>0074-2100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Skyrizi</ProprietaryName>
<NonProprietaryName>Risankizumab-rzaa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210426</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761105</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>RISANKIZUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210426</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SKYRIZI is an interleukin-23 antagonist indicated for the treatment of: 1 moderate-to-severe plaque psoriasis in adults and pediatric patients 6 years of age and older who are candidates for systemic therapy or phototherapy. (1.1) , 2 active psoriatic arthritis in adults and pediatric patients 6 years of age and older. (1.2), 3 moderately to severely active Crohn's disease in adults. (1.3), 4 moderately to severely active ulcerative colitis in adults. (1.4).</IndicationAndUsage>
<Description>Risankizumab-rzaa, an interleukin-23 (IL-23) antagonist, is a humanized immunoglobulin G1 (IgG1) monoclonal antibody. Risankizumab-rzaa is produced by recombinant DNA technology in Chinese hamster ovary cells and has an approximate molecular weight of 149 kDa. SKYRIZI (risankizumab-rzaa) injection 55 mg/0.37 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 55 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.02 mg), polysorbate 20 (0.07 mg), sodium acetate (0.28 mg), trehalose (23.4 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 90 mg/mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution. Each syringe delivers 90 mg of risankizumab-rzaa, and inactive ingredients polysorbate 20 (0.2 mg), sodium succinate (0.63 mg), sorbitol (41 mg), succinic acid (0.059 mg), and Water for Injection, USP. The pH is 6.2. SKYRIZI (risankizumab-rzaa) injection 150 mg/mL prefilled syringe or prefilled pen for subcutaneous use. Each SKYRIZI prefilled pen or prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe and pen delivers 150 mg of risankizumab-rzaa and the inactive ingredients glacial acetic acid (0.054 mg), polysorbate 20 (0.2 mg), sodium acetate (0.75 mg), trehalose (63.33 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2 mL prefilled syringe for subcutaneous use. Each SKYRIZI prefilled syringe contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each syringe delivers 180 mg of risankizumab-rzaa, and inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.898 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 180 mg/1.2mL (150 mg/mL) prefilled cartridge for use with supplied on-body-injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 180 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.065 mg), polysorbate 20 (0.24 mg), sodium acetate (0.9 mg), trehalose (76 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI (risankizumab-rzaa) injection 360 mg/2.4 mL (150 mg/mL) prefilled cartridge for use with the supplied on-body injector for subcutaneous use. Each SKYRIZI prefilled cartridge contains a sterile, preservative-free, colorless to yellow, and clear to slightly opalescent solution. Each cartridge delivers 360 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.13 mg), polysorbate 20 (0.48 mg), sodium acetate (1.8 mg), trehalose (152 mg), and Water for Injection, USP. The pH is 5.7. SKYRIZI 600 mg/10 mL (60 mg/mL) in a vial for intravenous infusion. SKYRIZI (risankizumab-rzaa) injection 600 mg/10 mL (60 mg/mL) is a sterile, preservative-free, colorless to slightly yellow, and clear to slightly opalescent solution in a 10 mL single-dose vial. Each 10 mL single-dose vial contains 600 mg of risankizumab-rzaa, and the inactive ingredients glacial acetic acid (0.54 mg), polysorbate 20 (2 mg), sodium acetate (7.5 mg), trehalose (633.3 mg), and Water for Injection, USP. The pH is 5.7.</Description>
</NDC>
</NDCList>