RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70377-075-91</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70377-075-91)  / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70377-0075-91</NDC11Code>
    <ProductNDC>70377-075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216438</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, white to off white lyophilized powder or cake for intravenous (IV) infusion that contains micafungin sodium USP. Micafungin sodium USP is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium USP) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium USP), 200 mg lactose monohydrate, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration(2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5-7. Micafungin sodium USP is chemically designated as: Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium USP is. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.27. Micafungin sodium USP is a light-sensitive, white to almost white amorphous powder that is soluble in water, practically insoluble in ethanol and in ethyl acetate.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-075-91</NDCCode>
    <PackageDescription>1000 TABLET, COATED in 1 BOTTLE (62332-075-91) </PackageDescription>
    <NDC11Code>62332-0075-91</NDC11Code>
    <ProductNDC>62332-075</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Memantine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151013</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200891</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151013</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Memantine hydrochloride is indiacted for the treatment of moderate to severe dementia of the Alzheimer's type.</IndicationAndUsage>
    <Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula.  The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride occurs as a fine white to off-white powder and is soluble in methanol and sparingly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, macrogol/polyethylene glycol 400, FD&amp;C yellow #6 aluminum lake and FD&amp;C blue #2 aluminum lake (5 mg tablets), and hypromellose, titanium dioxide, macrogol/polyethylene glycol 400 and iron oxide black (10 mg tablets).</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-017-91</NDCCode>
    <PackageDescription>2 BLISTER PACK in 1 CARTON (70377-017-91)  / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>70377-0017-91</NDC11Code>
    <ProductNDC>70377-017</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Teriflunomide</ProprietaryName>
    <NonProprietaryName>Teriflunomide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230313</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209639</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>TERIFLUNOMIDE</SubstanceName>
    <StrengthNumber>7</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230313</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
    <Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is practically insoluble in acetone, slightly soluble in ethanol, very slightly soluble in polyethylene glycol and isopropanol, and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablet contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, maize starch B, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-018-91</NDCCode>
    <PackageDescription>2 BLISTER PACK in 1 CARTON (70377-018-91)  / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>70377-0018-91</NDC11Code>
    <ProductNDC>70377-018</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Teriflunomide</ProprietaryName>
    <NonProprietaryName>Teriflunomide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230313</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209639</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>TERIFLUNOMIDE</SubstanceName>
    <StrengthNumber>14</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230313</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
    <Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is practically insoluble in acetone, slightly soluble in ethanol, very slightly soluble in polyethylene glycol and isopropanol, and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablet contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, maize starch B, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-076-91</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70377-076-91)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70377-0076-91</NDC11Code>
    <ProductNDC>70377-076</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Micafungin</ProprietaryName>
    <NonProprietaryName>Micafungin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216438</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Micafungin for injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation [see Clinical Studies (14.3)].</IndicationAndUsage>
    <Description>Micafungin for injection, USP is a sterile, white to off white lyophilized powder or cake for intravenous (IV) infusion that contains micafungin sodium USP. Micafungin sodium USP is a semisynthetic lipopeptide (echinocandin) synthesized by a chemical modification of a fermentation product of Coleophoma empetri F-11899. Micafungin inhibits the synthesis of 1,3-beta-D-glucan, an integral component of the fungal cell wall. Each single-dose vial contains 50 mg micafungin (equivalent to 50.86 mg micafungin sodium USP) or 100 mg micafungin (equivalent to 101.73 mg micafungin sodium USP), 200 mg lactose monohydrate, with citric acid and/or sodium hydroxide (used for pH adjustment). Micafungin for injection, USP must be diluted with 0.9% Sodium Chloride Injection, USP, or 5% Dextrose Injection, USP [see Dosage and Administration(2)]. Following reconstitution with 0.9% Sodium Chloride Injection, USP, the resulting pH of the solution is between 5-7. Micafungin sodium USP is chemically designated as: Pneumocandin A0,1-[(4R,5R)-4,5-dihydroxy-N2-[4-[5-[4-(pentyloxy) phenyl]-3-isoxazolyl]benzoyl]-L-ornithine]-4-[(4S)-4-hydroxy-4-[4-hydroxy-3-(sulfooxy)phenyl]-L-threonine]-, monosodium salt. The chemical structure of micafungin sodium USP is. The empirical/molecular formula is C56H70N9NaO23S and the formula weight is 1292.27. Micafungin sodium USP is a light-sensitive, white to almost white amorphous powder that is soluble in water, practically insoluble in ethanol and in ethyl acetate.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-093-91</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (70377-093-91)  / 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>70377-0093-91</NDC11Code>
    <ProductNDC>70377-093</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Daptomycin</ProprietaryName>
    <NonProprietaryName>Daptomycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217215</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>DAPTOMYCIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Daptomycin for injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) (1.1) and,, 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2), 3 Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (1.3).</IndicationAndUsage>
    <Description>Daptomycin for injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine ε1-lactone. The chemical structure is. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for injection is supplied in a single dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing approximately 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.7)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment. Freshly reconstituted solutions of daptomycin for injection range in color from pale yellow to light brown.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-082-11</NDCCode>
    <PackageDescription>1 BOTTLE, DISPENSING in 1 CARTON (70377-082-11)  &gt; 10 mL in 1 BOTTLE, DISPENSING</PackageDescription>
    <NDC11Code>70377-0082-11</NDC11Code>
    <ProductNDC>70377-082</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dorzolamide Hydrochloride Timolol Maleate</ProprietaryName>
    <NonProprietaryName>Dorzolamide Hydrochloride Timolol Maleate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20220108</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202054</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
    <StrengthNumber>20; 5</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220108</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is. [a]                                       25°C           (C=1, water) = ~ -17°.                                              405nm. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. [a]                                     25°C       in 1N HCl (C = 5) = -12.2° (-11.7° to -12.5°).                                            405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is supplied as a sterile, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride) and 5 mg timolol (equivalent to 6.83 mg timolol maleate). Inactive ingredients are sodium citrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-3349-99</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (0378-3349-99)  / 1 PATCH in 1 POUCH (0378-3349-16)  / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>00378-3349-99</NDC11Code>
    <ProductNDC>0378-3349</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20050407</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.025</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20050407</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-3350-99</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (0378-3350-99)  / 1 PATCH in 1 POUCH (0378-3350-16)  / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>00378-3350-99</NDC11Code>
    <ProductNDC>0378-3350</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20000301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-3351-99</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (0378-3351-99)  / 1 PATCH in 1 POUCH (0378-3351-16)  / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>00378-3351-99</NDC11Code>
    <ProductNDC>0378-3351</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20050407</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.075</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20050407</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-3352-99</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (0378-3352-99)  / 1 PATCH in 1 POUCH (0378-3352-16)  / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>00378-3352-99</NDC11Code>
    <ProductNDC>0378-3352</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20000301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-3360-99</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (0378-3360-99)  / 1 PATCH in 1 POUCH (0378-3360-16)  / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>00378-3360-99</NDC11Code>
    <ProductNDC>0378-3360</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20060809</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.0375</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060809</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-3361-99</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (0378-3361-99)  / 1 PATCH in 1 POUCH (0378-3361-16)  / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>00378-3361-99</NDC11Code>
    <ProductNDC>0378-3361</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20060809</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.06</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060809</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-8176-91</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (0378-8176-91) </PackageDescription>
    <NDC11Code>00378-8176-91</NDC11Code>
    <ProductNDC>0378-8176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Saxagliptin And Metformin</ProprietaryName>
    <NonProprietaryName>Saxagliptin And Metformin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230808</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205981</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>SAXAGLIPTIN HYDROCHLORIDE DIHYDRATE; METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2.5; 1000</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230808</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Saxagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>Saxagliptin and metformin hydrochloride extended-release tablets contain two oral antihyperglycemic medications used in the management of type 2 diabetes mellitus: saxagliptin and metformin HCl. Saxagliptin. Saxagliptin is an orally active inhibitor of the dipeptidyl-peptidase-4 (DPP4) enzyme. Saxagliptin hydrochloride dihydrate is described chemically as (1S,3S,5S)-2-[(2S)-Amino-(3-hydroxytricyclo[3.3.1.13,7]dec-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrochloride dihydrate or (1S,3S,5S)-2-[(2S)-2-Amino-2-(3-hydroxyadamantan-1-yl)acetyl]-2-azabicyclo[3.1.0]hexane-3-carbonitrile hydrochloride dihydrate. The empirical formula is C18H25N3O2HCl2 H2O and the molecular weight is 387.92. The structural formula is. Saxagliptin hydrochloride dihydrate is a white to off white, non-hygroscopic, crystalline powder. It is sparingly soluble in water at 24°C ± 3°C, slightly soluble in ethyl acetate, and soluble in methanol, ethanol, isopropyl alcohol, acetonitrile, acetone, and polyethylene glycol 400 (PEG 400). Metformin HCl. Metformin hydrochloride, USP (1,1-Dimethylbiguanide monohydrochloride) is a white, crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.36. The structural formula is. Saxagliptin and Metformin Hydrochloride Extended-Release Tablets. Saxagliptin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing either 6.149 mg saxagliptin hydrochloride dihydrate equivalent to 5 mg saxagliptin and 500 mg metformin hydrochloride (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/500 mg), or 6.149 mg saxagliptin hydrochloride dihydrate equivalent to 5 mg saxagliptin and 1000 mg metformin hydrochloride (saxagliptin and metformin hydrochloride extended-release tablets 5 mg/1000 mg), or 3.075 mg saxagliptin hydrochloride dihydrate equivalent to 2.5 mg saxagliptin and 1000 mg metformin hydrochloride (saxagliptin and metformin hydrochloride extended-release tablets 2.5 mg/1000 mg). Each film-coated tablet of saxagliptin and metformin hydrochloride extended-release contains the following inactive ingredients: carbomer homopolymer type A, colloidal silicon dioxide, hypromellose, magnesium stearate, polyethylene glycol, polyvinyl alcohol, povidone, red iron oxide, stearic acid, talc and titanium dioxide. The 2.5 mg/1000 mg tablets also contain yellow iron oxide. In addition, the black imprinting ink contains ammonium hydroxide, black iron oxide, propylene glycol and shellac glaze. The biologically inert components of the tablet may occasionally remain intact during gastrointestinal transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-7611-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (50090-7611-0)  / 1 PATCH in 1 POUCH / 7 d in 1 PATCH</PackageDescription>
    <NDC11Code>50090-7611-00</NDC11Code>
    <ProductNDC>50090-7611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20000301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250722</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-7984-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (50090-7984-0)  / 1 d in 1 POUCH</PackageDescription>
    <NDC11Code>50090-7984-00</NDC11Code>
    <ProductNDC>50090-7984</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20000301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-7985-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (50090-7985-0)  / 1 d in 1 POUCH</PackageDescription>
    <NDC11Code>50090-7985-00</NDC11Code>
    <ProductNDC>50090-7985</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20050407</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.025</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260602</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-7986-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (50090-7986-0)  / 1 d in 1 POUCH</PackageDescription>
    <NDC11Code>50090-7986-00</NDC11Code>
    <ProductNDC>50090-7986</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20050407</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.075</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260603</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-7987-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (50090-7987-0)  / 1 d in 1 POUCH</PackageDescription>
    <NDC11Code>50090-7987-00</NDC11Code>
    <ProductNDC>50090-7987</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20060809</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.0375</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260603</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-7988-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (50090-7988-0)  / 1 d in 1 POUCH</PackageDescription>
    <NDC11Code>50090-7988-00</NDC11Code>
    <ProductNDC>50090-7988</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20060809</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.06</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260603</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
    <Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2  ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-4811-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (54868-4811-0)  &gt; 1 PATCH in 1 POUCH &gt; 24 [USP'U] in 1 PATCH</PackageDescription>
    <NDC11Code>54868-4811-00</NDC11Code>
    <ProductNDC>54868-4811</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20030614</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>.97</StrengthNumber>
    <StrengthUnit>mg/48[USP'U]</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Estradiol Transdermal System Continuous Delivery (Once-Weekly), USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause.  , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered.The mainstays for decreasing the risk of postmenopausal osteoporosis are weight bearing exercise, adequate calcium and vitamin D intake, and when indicated, pharmacologic therapy. Postmenopausal women require an average of 1500 mg/day of elemental calcium. Therefore, when not contraindicated, calcium supplementation may be helpful for women with suboptimal dietary intake. Vitamin D supplementation of 400 IU/day to 800 IU/day may also be required to ensure adequate daily intake in postmenopausal women.</IndicationAndUsage>
    <Description>Estradiol Transdermal System Continuous Delivery (Once-Weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025 mg, 0.0375 mg, 0.05 mg, 0.06 mg, 0.075 mg or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 or 31 cm2, and contains 0.97 mg, 1.46 mg, 1.94 mg, 2.33 mg, 2.91 mg or 3.88 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has a molecular formula of C18H2402 and molecular weight of 272.39. The structural formula is. The Estradiol Transdermal System Continuous Delivery (Once-Weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a foam backing with adhesive layer, (2) a polyester film, and (3) an acrylate adhesive matrix containing estradiol USP. A protective liner (4) of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-4813-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (54868-4813-0)  &gt; 1 PATCH in 1 POUCH &gt; 24 [USP'U] in 1 PATCH</PackageDescription>
    <NDC11Code>54868-4813-00</NDC11Code>
    <ProductNDC>54868-4813</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20030609</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>1.46</StrengthNumber>
    <StrengthUnit>mg/48[USP'U]</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Estradiol Transdermal System Continuous Delivery (Once-Weekly), USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause.  , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered.The mainstays for decreasing the risk of postmenopausal osteoporosis are weight bearing exercise, adequate calcium and vitamin D intake, and when indicated, pharmacologic therapy. Postmenopausal women require an average of 1500 mg/day of elemental calcium. Therefore, when not contraindicated, calcium supplementation may be helpful for women with suboptimal dietary intake. Vitamin D supplementation of 400 IU/day to 800 IU/day may also be required to ensure adequate daily intake in postmenopausal women.</IndicationAndUsage>
    <Description>Estradiol Transdermal System Continuous Delivery (Once-Weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025 mg, 0.0375 mg, 0.05 mg, 0.06 mg, 0.075 mg or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 or 31 cm2, and contains 0.97 mg, 1.46 mg, 1.94 mg, 2.33 mg, 2.91 mg or 3.88 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has a molecular formula of C18H2402 and molecular weight of 272.39. The structural formula is. The Estradiol Transdermal System Continuous Delivery (Once-Weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a foam backing with adhesive layer, (2) a polyester film, and (3) an acrylate adhesive matrix containing estradiol USP. A protective liner (4) of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-5009-0</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (54868-5009-0)  &gt; 1 PATCH in 1 POUCH &gt; 24 [USP'U] in 1 PATCH</PackageDescription>
    <NDC11Code>54868-5009-00</NDC11Code>
    <ProductNDC>54868-5009</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol</ProprietaryName>
    <NonProprietaryName>Estradiol</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20081211</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075182</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ESTRADIOL</SubstanceName>
    <StrengthNumber>1.94</StrengthNumber>
    <StrengthUnit>mg/48[USP'U]</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Estradiol Transdermal System Continuous Delivery (Once-Weekly), USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause.  , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered.The mainstays for decreasing the risk of postmenopausal osteoporosis are weight bearing exercise, adequate calcium and vitamin D intake, and when indicated, pharmacologic therapy. Postmenopausal women require an average of 1500 mg/day of elemental calcium. Therefore, when not contraindicated, calcium supplementation may be helpful for women with suboptimal dietary intake. Vitamin D supplementation of 400 IU/day to 800 IU/day may also be required to ensure adequate daily intake in postmenopausal women.</IndicationAndUsage>
    <Description>Estradiol Transdermal System Continuous Delivery (Once-Weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025 mg, 0.0375 mg, 0.05 mg, 0.06 mg, 0.075 mg or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 or 31 cm2, and contains 0.97 mg, 1.46 mg, 1.94 mg, 2.33 mg, 2.91 mg or 3.88 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has a molecular formula of C18H2402 and molecular weight of 272.39. The structural formula is. The Estradiol Transdermal System Continuous Delivery (Once-Weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a foam backing with adhesive layer, (2) a polyester film, and (3) an acrylate adhesive matrix containing estradiol USP. A protective liner (4) of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-001-12</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70377-001-12) </PackageDescription>
    <NDC11Code>70377-0001-12</NDC11Code>
    <ProductNDC>70377-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078034</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc,</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated: 1 To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events., 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):In adults with primary hyperlipidemia.In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).</IndicationAndUsage>
    <Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form.  This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase.  This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4­hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: alcohol, anhydrous citric acid, ascorbic acid, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (maize), purified water, talc, titanium dioxide, triethyl citrate, and butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contains red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-001-13</NDCCode>
    <PackageDescription>45 TABLET, FILM COATED in 1 BOTTLE (70377-001-13) </PackageDescription>
    <NDC11Code>70377-0001-13</NDC11Code>
    <ProductNDC>70377-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078034</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc,</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated: 1 To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events., 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):In adults with primary hyperlipidemia.In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).</IndicationAndUsage>
    <Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form.  This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase.  This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4­hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: alcohol, anhydrous citric acid, ascorbic acid, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (maize), purified water, talc, titanium dioxide, triethyl citrate, and butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contains red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-001-14</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (70377-001-14) </PackageDescription>
    <NDC11Code>70377-0001-14</NDC11Code>
    <ProductNDC>70377-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078034</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc,</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated: 1 To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events., 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):In adults with primary hyperlipidemia.In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).</IndicationAndUsage>
    <Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form.  This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase.  This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4­hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: alcohol, anhydrous citric acid, ascorbic acid, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (maize), purified water, talc, titanium dioxide, triethyl citrate, and butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contains red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-001-15</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70377-001-15) </PackageDescription>
    <NDC11Code>70377-0001-15</NDC11Code>
    <ProductNDC>70377-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078034</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc,</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated: 1 To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events., 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):In adults with primary hyperlipidemia.In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).</IndicationAndUsage>
    <Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form.  This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase.  This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4­hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: alcohol, anhydrous citric acid, ascorbic acid, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (maize), purified water, talc, titanium dioxide, triethyl citrate, and butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contains red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-002-12</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70377-002-12) </PackageDescription>
    <NDC11Code>70377-0002-12</NDC11Code>
    <ProductNDC>70377-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078034</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc,</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated: 1 To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events., 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):In adults with primary hyperlipidemia.In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).</IndicationAndUsage>
    <Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form.  This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase.  This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4­hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: alcohol, anhydrous citric acid, ascorbic acid, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (maize), purified water, talc, titanium dioxide, triethyl citrate, and butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contains red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-002-13</NDCCode>
    <PackageDescription>45 TABLET, FILM COATED in 1 BOTTLE (70377-002-13) </PackageDescription>
    <NDC11Code>70377-0002-13</NDC11Code>
    <ProductNDC>70377-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078034</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc,</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated: 1 To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events., 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):In adults with primary hyperlipidemia.In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).</IndicationAndUsage>
    <Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form.  This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase.  This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4­hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: alcohol, anhydrous citric acid, ascorbic acid, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (maize), purified water, talc, titanium dioxide, triethyl citrate, and butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contains red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-002-14</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (70377-002-14) </PackageDescription>
    <NDC11Code>70377-0002-14</NDC11Code>
    <ProductNDC>70377-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Simvastatin</ProprietaryName>
    <NonProprietaryName>Simvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078034</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc,</LabelerName>
    <SubstanceName>SIMVASTATIN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Simvastatin tablets are indicated: 1 To reduce the risk of total mortality by reducing risk of coronary heart disease death, non-fatal myocardial infarction and stroke, and the need for coronary and non-coronary revascularization procedures in adults with established coronary heart disease, cerebrovascular disease, peripheral vascular disease, and/or diabetes, who are at high risk of coronary heart disease events., 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C):In adults with primary hyperlipidemia.In adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).</IndicationAndUsage>
    <Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form.  This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase.  This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4­hydroxy-6-oxo-2H-pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1S-[1α,3α,7β,8β(2S*,4S*),-8aβ]]. The empirical formula of simvastatin is C25H38O5 and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: alcohol, anhydrous citric acid, ascorbic acid, colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (maize), purified water, talc, titanium dioxide, triethyl citrate, and butylated hydroxyanisole is added as a preservative. Simvastatin 10mg, 20mg, and 40 mg contains red and yellow ferric oxide. Simvastatin 80 mg contains red ferric oxide.</Description>
  </NDC>
</NDCList>