{
"NDC": [
{
"NDCCode": "70377-082-11",
"PackageDescription": "1 BOTTLE, DISPENSING in 1 CARTON (70377-082-11) > 10 mL in 1 BOTTLE, DISPENSING",
"NDC11Code": "70377-0082-11",
"ProductNDC": "70377-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dorzolamide Hydrochloride Timolol Maleate",
"NonProprietaryName": "Dorzolamide Hydrochloride Timolol Maleate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20220108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202054",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE",
"StrengthNumber": "20; 5",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220108",
"SamplePackage": "N",
"IndicationAndUsage": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].",
"Description": "Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is. [a] 25°C (C=1, water) = ~ -17°. 405nm. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. [a] 25°C in 1N HCl (C = 5) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is supplied as a sterile, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride) and 5 mg timolol (equivalent to 6.83 mg timolol maleate). Inactive ingredients are sodium citrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative."
},
{
"NDCCode": "16714-082-11",
"PackageDescription": "500 TABLET in 1 BOTTLE (16714-082-11) ",
"NDC11Code": "16714-0082-11",
"ProductNDC": "16714-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040840",
"LabelerName": "Northstar RxLLC",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091111",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydrOXYzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. HydrOXYzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydrOXYzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "HydrOXYzine hydrochloride, USP has the chemical name of (±)-2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl] ethoxy]ethanol dihydrochloride. HydrOXYzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water; soluble in chloroform; slightly soluble in acetone; practically insoluble in ether. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydrOXYzine hydrochloride USP. Inactive ingredients for 10 mg include anhydrous lactose, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch and titanium dioxide. Inactive ingredients for 25 mg include anhydrous lactose, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate and titanium dioxide. Inactive ingredients for 50 mg include anhydrous lactose, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "50268-082-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-082-15) > 1 TABLET in 1 BLISTER PACK (50268-082-11)",
"NDC11Code": "50268-0082-15",
"ProductNDC": "50268-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110607",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078500",
"LabelerName": "AvPAK",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2015-12-11"
},
{
"NDCCode": "68084-082-01",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-082-01) / 1 TABLET in 1 BLISTER PACK (68084-082-11) ",
"NDC11Code": "68084-0082-01",
"ProductNDC": "68084-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate",
"NonProprietaryName": "Isosorbide Dinitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086925",
"LabelerName": "American Health Packaging",
"SubstanceName": "ISOSORBIDE DINITRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131021",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide dinitrate, an organic nitrate, is a vasodilator with effects on both arteries and veins. The chemical name for isosorbide dinitrate is 1,4:3,6-dianhydro-D-glucitol 2, 5-dinitrate. The compound has the following structural formula. Isosorbide dinitrate is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of 70°C and has an optical rotation of +134° (c=1.0, alcohol, 20°C). Isosorbide dinitrate is freely soluble in organic solvents such as acetone, alcohol, and ether, but is only sparingly soluble in water. Isosorbide dinitrate tablets are available for oral administration as 5 mg, 10 mg, 20 mg, or 30 mg tablets. Each tablet contains the following inactive ingredients: lactose anhydrous, magnesium stearate, microcrystalline cellulose, sodium starch glycolate and stearic acid. In addition, the 20 mg tablet contains D&C Yellow #10, FD&C Blue #1, and FD&C Yellow #6; the 30 mg tablet contains FD&C Blue #1."
},
{
"NDCCode": "71209-082-11",
"PackageDescription": "1000 TABLET, COATED in 1 BOTTLE (71209-082-11) ",
"NDC11Code": "71209-0082-11",
"ProductNDC": "71209-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Raloxifene Hydrochloride",
"NonProprietaryName": "Raloxifene Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171230",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211324",
"LabelerName": "Cadila Pharmaceuticals Limited",
"SubstanceName": "RALOXIFENE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Active",
"LastUpdate": "2022-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211213",
"SamplePackage": "N",
"IndicationAndUsage": "Raloxifene hydrochloride is an estrogen agonist/antagonist indicated for. Important Limitations: Raloxifene hydrochloride is not indicated for the treatment of invasive breast cancer, reduction of the risk of recurrence of breast cancer, or reduction of risk of noninvasive breast cancer. (1.3).",
"Description": "Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is:. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl) benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride (HCl), USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05. Raloxifene HCl, USP is an off-white to pale-yellow solid that is very slightly soluble in water. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each raloxifene hydrochloride tablet, USP contains 60 mg of raloxifene HCl, which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, lactose anhydrous, magnesium stearate, polyethylene glycol 400, polysorbate 80, povidone and titanium dioxide."
},
{
"NDCCode": "73212-082-11",
"PackageDescription": "50 g in 1 BOTTLE (73212-082-11) ",
"NDC11Code": "73212-0082-11",
"ProductNDC": "73212-082",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Mk-2866",
"DosageFormName": "POWDER",
"StartMarketingDate": "20231101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Biopeptek Co., Ltd.",
"SubstanceName": "ENOBOSARM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-01-12",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-NOV-23"
},
{
"NDCCode": "70377-006-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-006-11) ",
"NDC11Code": "70377-0006-11",
"ProductNDC": "70377-006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207752",
"LabelerName": "Biocon Pharma Inc",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161031",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.",
"Description": "Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin."
},
{
"NDCCode": "70377-007-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-007-11) ",
"NDC11Code": "70377-0007-11",
"ProductNDC": "70377-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207752",
"LabelerName": "Biocon Pharma Inc",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161031",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.",
"Description": "Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin."
},
{
"NDCCode": "70377-008-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-008-11) ",
"NDC11Code": "70377-0008-11",
"ProductNDC": "70377-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207752",
"LabelerName": "Biocon Pharma Inc",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161031",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.",
"Description": "Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin."
},
{
"NDCCode": "70377-009-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-009-11) ",
"NDC11Code": "70377-0009-11",
"ProductNDC": "70377-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207752",
"LabelerName": "Biocon Pharma Inc",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161031",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.",
"Description": "Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin."
},
{
"NDCCode": "70377-010-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (70377-010-11) ",
"NDC11Code": "70377-0010-11",
"ProductNDC": "70377-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Everolimus",
"NonProprietaryName": "Everolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214182",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "EVEROLIMUS",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230608",
"SamplePackage": "N",
"IndicationAndUsage": "Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).",
"Description": "Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate."
},
{
"NDCCode": "70377-011-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (70377-011-11) ",
"NDC11Code": "70377-0011-11",
"ProductNDC": "70377-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Everolimus",
"NonProprietaryName": "Everolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214182",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "EVEROLIMUS",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230608",
"SamplePackage": "N",
"IndicationAndUsage": "Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).",
"Description": "Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate."
},
{
"NDCCode": "70377-012-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (70377-012-11) ",
"NDC11Code": "70377-0012-11",
"ProductNDC": "70377-012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Everolimus",
"NonProprietaryName": "Everolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214182",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "EVEROLIMUS",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230608",
"SamplePackage": "N",
"IndicationAndUsage": "Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).",
"Description": "Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate."
},
{
"NDCCode": "70377-013-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (70377-013-11) ",
"NDC11Code": "70377-0013-11",
"ProductNDC": "70377-013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Everolimus",
"NonProprietaryName": "Everolimus",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214182",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "EVEROLIMUS",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230608",
"SamplePackage": "N",
"IndicationAndUsage": "Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).",
"Description": "Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate."
},
{
"NDCCode": "70377-014-11",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (70377-014-11) ",
"NDC11Code": "70377-0014-11",
"ProductNDC": "70377-014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tacrolimus",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212297",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201223",
"SamplePackage": "N",
"IndicationAndUsage": "Tacrolimus capsules are calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants, in combination with other immunosuppressants. (1.1).",
"Description": "Tacrolimus USP, previously known as FK506, is the active ingredient in Tacrolimus capsules, USP. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus USP is designated as 15,19-Epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone 5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hy-droxy-3-methoxy cyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8- (2-propenyl)-, mono-hydrate, [3S [3R*,E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,-14R*,15S*,16R*,18S*,19S*,26aR*]]-; (-)- (3S,4R,5S,8R, 9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24, 25,26,26ahexadecahydro- 5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4- hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16- dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3Hpyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)- te-trone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus USP appears as white to off-white powder. It is soluble in methanol, ethanol, acetone, ethyl acetate and chloroform. Insoluble in water. Tacrolimus USP is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose anhydrous NF, croscarmellose sodium NF, hypromellose USP, magnesium stearate NF. The 0.5 mg capsule shell contains ferric oxide yellow, gelatin NF and titanium dioxide USP, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains ferric oxide red, gelatin NF, and titanium dioxide USP. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of red ink used in Tacrolimus capsules USP, 0.5 mg and 1 mg are Shellac, Propylene glycol, Sodium hydroxide, Titanium dioxide, Povidone and FD&C Red Aluminium Lake. The components of white ink used in Tacrolimus capsules USP, 5 mg are Shellac, Propylene glycol, Ammonia solution, Titanium dioxide and Potassium Hydroxide. Tacrolimus capsules meet USP Organic Impurities, Procedure 2. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70377-015-11",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (70377-015-11) ",
"NDC11Code": "70377-0015-11",
"ProductNDC": "70377-015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tacrolimus",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212297",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201223",
"SamplePackage": "N",
"IndicationAndUsage": "Tacrolimus capsules are calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants, in combination with other immunosuppressants. (1.1).",
"Description": "Tacrolimus USP, previously known as FK506, is the active ingredient in Tacrolimus capsules, USP. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus USP is designated as 15,19-Epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone 5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hy-droxy-3-methoxy cyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8- (2-propenyl)-, mono-hydrate, [3S [3R*,E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,-14R*,15S*,16R*,18S*,19S*,26aR*]]-; (-)- (3S,4R,5S,8R, 9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24, 25,26,26ahexadecahydro- 5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4- hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16- dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3Hpyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)- te-trone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus USP appears as white to off-white powder. It is soluble in methanol, ethanol, acetone, ethyl acetate and chloroform. Insoluble in water. Tacrolimus USP is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose anhydrous NF, croscarmellose sodium NF, hypromellose USP, magnesium stearate NF. The 0.5 mg capsule shell contains ferric oxide yellow, gelatin NF and titanium dioxide USP, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains ferric oxide red, gelatin NF, and titanium dioxide USP. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of red ink used in Tacrolimus capsules USP, 0.5 mg and 1 mg are Shellac, Propylene glycol, Sodium hydroxide, Titanium dioxide, Povidone and FD&C Red Aluminium Lake. The components of white ink used in Tacrolimus capsules USP, 5 mg are Shellac, Propylene glycol, Ammonia solution, Titanium dioxide and Potassium Hydroxide. Tacrolimus capsules meet USP Organic Impurities, Procedure 2. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70377-016-11",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (70377-016-11) ",
"NDC11Code": "70377-0016-11",
"ProductNDC": "70377-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tacrolimus",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212297",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201223",
"SamplePackage": "N",
"IndicationAndUsage": "Tacrolimus capsules are calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants, in combination with other immunosuppressants. (1.1).",
"Description": "Tacrolimus USP, previously known as FK506, is the active ingredient in Tacrolimus capsules, USP. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus USP is designated as 15,19-Epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone 5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hy-droxy-3-methoxy cyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8- (2-propenyl)-, mono-hydrate, [3S [3R*,E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,-14R*,15S*,16R*,18S*,19S*,26aR*]]-; (-)- (3S,4R,5S,8R, 9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24, 25,26,26ahexadecahydro- 5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4- hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16- dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3Hpyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)- te-trone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus USP appears as white to off-white powder. It is soluble in methanol, ethanol, acetone, ethyl acetate and chloroform. Insoluble in water. Tacrolimus USP is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose anhydrous NF, croscarmellose sodium NF, hypromellose USP, magnesium stearate NF. The 0.5 mg capsule shell contains ferric oxide yellow, gelatin NF and titanium dioxide USP, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains ferric oxide red, gelatin NF, and titanium dioxide USP. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of red ink used in Tacrolimus capsules USP, 0.5 mg and 1 mg are Shellac, Propylene glycol, Sodium hydroxide, Titanium dioxide, Povidone and FD&C Red Aluminium Lake. The components of white ink used in Tacrolimus capsules USP, 5 mg are Shellac, Propylene glycol, Ammonia solution, Titanium dioxide and Potassium Hydroxide. Tacrolimus capsules meet USP Organic Impurities, Procedure 2. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70377-017-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70377-017-11) ",
"NDC11Code": "70377-0017-11",
"ProductNDC": "70377-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209639",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230313",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is practically insoluble in acetone, slightly soluble in ethanol, very slightly soluble in polyethylene glycol and isopropanol, and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablet contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, maize starch B, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol and talc."
},
{
"NDCCode": "70377-018-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70377-018-11) ",
"NDC11Code": "70377-0018-11",
"ProductNDC": "70377-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230313",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209639",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "14",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230313",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is practically insoluble in acetone, slightly soluble in ethanol, very slightly soluble in polyethylene glycol and isopropanol, and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablet contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, maize starch B, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol and talc."
},
{
"NDCCode": "70377-019-11",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (70377-019-11) ",
"NDC11Code": "70377-0019-11",
"ProductNDC": "70377-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fingolimod",
"NonProprietaryName": "Fingolimod",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207979",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "FINGOLIMOD HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240328",
"SamplePackage": "N",
"IndicationAndUsage": "Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.",
"Description": "Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to off white powder that is freely soluble in ethanol, soluble in water and practically insoluble in n-Hexane. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each fingolimod capsule 0.5 mg contains the following inactive ingredients: colloidal silicon dioxide, gelatin, iron oxide yellow, magnesium stearate, microcrystalline cellulose, titanium dioxide. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of black ink used in fingolimod capsules, 0.5 mg are Shellac, Black iron oxide and Potassium hydroxide."
},
{
"NDCCode": "70377-023-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-023-11) ",
"NDC11Code": "70377-0023-11",
"ProductNDC": "70377-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin",
"NonProprietaryName": "Dapagliflozin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211470",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "DAPAGLIFLOZIN 2,3-BUTANEDIOL MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin tablets are indicated: 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S, 3R, 4R, 5S, 6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxyl methyl) tetrahydro-2H-pyran-3,4,5-triol compound with meso-butane 2,3-diol (1:1) hydrate. The empirical formula is C25H37ClO9 and the molecular weight is 517.01. The structural formula is. Dapagliflozin is available as a film-coated tablet for oral administration containing the equivalent of 5 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate or the equivalent of 10 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate, and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, magnesium stearate and microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Contains no ingredient made from a gluten containing grain (wheat, barley, or rye)."
},
{
"NDCCode": "70377-024-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-024-11) ",
"NDC11Code": "70377-0024-11",
"ProductNDC": "70377-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin",
"NonProprietaryName": "Dapagliflozin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211470",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "DAPAGLIFLOZIN 2,3-BUTANEDIOL MONOHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin tablets are indicated: 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S, 3R, 4R, 5S, 6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxyl methyl) tetrahydro-2H-pyran-3,4,5-triol compound with meso-butane 2,3-diol (1:1) hydrate. The empirical formula is C25H37ClO9 and the molecular weight is 517.01. The structural formula is. Dapagliflozin is available as a film-coated tablet for oral administration containing the equivalent of 5 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate or the equivalent of 10 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate, and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, magnesium stearate and microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Contains no ingredient made from a gluten containing grain (wheat, barley, or rye)."
},
{
"NDCCode": "70377-027-11",
"PackageDescription": "90 TABLET in 1 BOTTLE (70377-027-11) ",
"NDC11Code": "70377-0027-11",
"ProductNDC": "70377-027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium, Film Coated",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209912",
"LabelerName": "Biocon Pharma Inc.,",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180618",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5."
},
{
"NDCCode": "70377-028-11",
"PackageDescription": "90 TABLET in 1 BOTTLE (70377-028-11) ",
"NDC11Code": "70377-0028-11",
"ProductNDC": "70377-028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium, Film Coated",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209912",
"LabelerName": "Biocon Pharma Inc.,",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180618",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5."
},
{
"NDCCode": "70377-029-11",
"PackageDescription": "90 TABLET in 1 BOTTLE (70377-029-11) ",
"NDC11Code": "70377-0029-11",
"ProductNDC": "70377-029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium, Film Coated",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209912",
"LabelerName": "Biocon Pharma Inc.,",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180618",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5."
},
{
"NDCCode": "70377-030-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (70377-030-11) ",
"NDC11Code": "70377-0030-11",
"ProductNDC": "70377-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium, Film Coated",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209912",
"LabelerName": "Biocon Pharma Inc.,",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180618",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5."
},
{
"NDCCode": "70377-031-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70377-031-11) ",
"NDC11Code": "70377-0031-11",
"ProductNDC": "70377-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213680",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250717",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain sacubitril sodium and valsartan disodium in the molar ratio of 1:1 respectively. Sacubitril sodium is chemically described as Sodium 4-(((2S, 4R)-1- ([1,1ʹ-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl) amino)-4-oxo butanoate. Valsartan disodium is chemically described as (S)-3-methyl-2-(N-{[2'-(2H-1,2,3,4-tetrazol-5-yl)biphenyl- 4-yl]methyl}pentanamido)disodium butanoate. Empirical formula of sacubitril sodium and valsartan disodium are C24H28NO5Na and C24H27N5Na2O3 respectively. Molecular mass of Sacubitril sodium and Valsartan disodium are 433.48 and 479.49 g/mol respectively. Molecular structure of both drug substances are as below. Sacubitril sodium. Valsartan disodium. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are gmcc (glyceryl monocaprylocaprate) type 1 / glycerol esters of fatty acids, polyvinyl alcohol-part. hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red."
},
{
"NDCCode": "70377-032-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70377-032-11) ",
"NDC11Code": "70377-0032-11",
"ProductNDC": "70377-032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213680",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250717",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain sacubitril sodium and valsartan disodium in the molar ratio of 1:1 respectively. Sacubitril sodium is chemically described as Sodium 4-(((2S, 4R)-1- ([1,1ʹ-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl) amino)-4-oxo butanoate. Valsartan disodium is chemically described as (S)-3-methyl-2-(N-{[2'-(2H-1,2,3,4-tetrazol-5-yl)biphenyl- 4-yl]methyl}pentanamido)disodium butanoate. Empirical formula of sacubitril sodium and valsartan disodium are C24H28NO5Na and C24H27N5Na2O3 respectively. Molecular mass of Sacubitril sodium and Valsartan disodium are 433.48 and 479.49 g/mol respectively. Molecular structure of both drug substances are as below. Sacubitril sodium. Valsartan disodium. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are gmcc (glyceryl monocaprylocaprate) type 1 / glycerol esters of fatty acids, polyvinyl alcohol-part. hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red."
},
{
"NDCCode": "70377-033-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70377-033-11) ",
"NDC11Code": "70377-0033-11",
"ProductNDC": "70377-033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213680",
"LabelerName": "Biocon Pharma Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250717",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain sacubitril sodium and valsartan disodium in the molar ratio of 1:1 respectively. Sacubitril sodium is chemically described as Sodium 4-(((2S, 4R)-1- ([1,1ʹ-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl) amino)-4-oxo butanoate. Valsartan disodium is chemically described as (S)-3-methyl-2-(N-{[2'-(2H-1,2,3,4-tetrazol-5-yl)biphenyl- 4-yl]methyl}pentanamido)disodium butanoate. Empirical formula of sacubitril sodium and valsartan disodium are C24H28NO5Na and C24H27N5Na2O3 respectively. Molecular mass of Sacubitril sodium and Valsartan disodium are 433.48 and 479.49 g/mol respectively. Molecular structure of both drug substances are as below. Sacubitril sodium. Valsartan disodium. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are gmcc (glyceryl monocaprylocaprate) type 1 / glycerol esters of fatty acids, polyvinyl alcohol-part. hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red."
},
{
"NDCCode": "70377-034-11",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70377-034-11) ",
"NDC11Code": "70377-0034-11",
"ProductNDC": "70377-034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190128",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211020",
"LabelerName": "Biocon Pharma Inc.,",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190128",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (XL) are an aminoketone antidepressant, indicated for: 1 treatment of major depressive disorder (MDD) (1.1), 2 prevention of seasonal affective disorder (SAD) (1.2).",
"Description": "Bupropion hydrochloride USP, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white and soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg which are white to pale yellow round biconvex coated tablets imprinted with '188' and '189' in black ink on one side and plain on other side respectively. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ethylcellulose, glyceryl behenate, hydrochloric acid, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, methylene chloride, opadry®(it contains hypromellose, tricetin and talc), opacode® (it contains shellac glaze, ferrosoferric oxide, propylene glycol and ammonium hydroxide), polyethylene glycol, povidone, silicon dioxide and triethyl citrate. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. The drug Product meets the requirements of USP Dissolution Test 14."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70377-082-11</NDCCode>
<PackageDescription>1 BOTTLE, DISPENSING in 1 CARTON (70377-082-11) > 10 mL in 1 BOTTLE, DISPENSING</PackageDescription>
<NDC11Code>70377-0082-11</NDC11Code>
<ProductNDC>70377-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dorzolamide Hydrochloride Timolol Maleate</ProprietaryName>
<NonProprietaryName>Dorzolamide Hydrochloride Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20220108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202054</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>20; 5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6-methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is. [a] 25°C (C=1, water) = ~ -17°. 405nm. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride has a molecular weight of 360.91. It is a white to off-white, crystalline powder, which is soluble in water and slightly soluble in methanol and ethanol. Timolol maleate is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. [a] 25°C in 1N HCl (C = 5) = -12.2° (-11.7° to -12.5°). 405 nm. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate has a molecular weight of 432.50. It is a white, odorless, crystalline powder which is soluble in water, methanol, and alcohol. Timolol maleate is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP is supplied as a sterile, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 to 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP contains 20 mg dorzolamide (equivalent to 22.26 mg of dorzolamide hydrochloride) and 5 mg timolol (equivalent to 6.83 mg timolol maleate). Inactive ingredients are sodium citrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Benzalkonium chloride 0.0075% is added as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>16714-082-11</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (16714-082-11) </PackageDescription>
<NDC11Code>16714-0082-11</NDC11Code>
<ProductNDC>16714-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040840</ApplicationNumber>
<LabelerName>Northstar RxLLC</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydrOXYzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. HydrOXYzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydrOXYzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>HydrOXYzine hydrochloride, USP has the chemical name of (±)-2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl] ethoxy]ethanol dihydrochloride. HydrOXYzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water; soluble in chloroform; slightly soluble in acetone; practically insoluble in ether. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydrOXYzine hydrochloride USP. Inactive ingredients for 10 mg include anhydrous lactose, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch and titanium dioxide. Inactive ingredients for 25 mg include anhydrous lactose, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate and titanium dioxide. Inactive ingredients for 50 mg include anhydrous lactose, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50268-082-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-082-15) > 1 TABLET in 1 BLISTER PACK (50268-082-11)</PackageDescription>
<NDC11Code>50268-0082-15</NDC11Code>
<ProductNDC>50268-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110607</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078500</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-12-11</LastUpdate>
</NDC>
<NDC>
<NDCCode>68084-082-01</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-082-01) / 1 TABLET in 1 BLISTER PACK (68084-082-11) </PackageDescription>
<NDC11Code>68084-0082-01</NDC11Code>
<ProductNDC>68084-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086925</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide dinitrate, an organic nitrate, is a vasodilator with effects on both arteries and veins. The chemical name for isosorbide dinitrate is 1,4:3,6-dianhydro-D-glucitol 2, 5-dinitrate. The compound has the following structural formula. Isosorbide dinitrate is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of 70°C and has an optical rotation of +134° (c=1.0, alcohol, 20°C). Isosorbide dinitrate is freely soluble in organic solvents such as acetone, alcohol, and ether, but is only sparingly soluble in water. Isosorbide dinitrate tablets are available for oral administration as 5 mg, 10 mg, 20 mg, or 30 mg tablets. Each tablet contains the following inactive ingredients: lactose anhydrous, magnesium stearate, microcrystalline cellulose, sodium starch glycolate and stearic acid. In addition, the 20 mg tablet contains D&C Yellow #10, FD&C Blue #1, and FD&C Yellow #6; the 30 mg tablet contains FD&C Blue #1.</Description>
</NDC>
<NDC>
<NDCCode>71209-082-11</NDCCode>
<PackageDescription>1000 TABLET, COATED in 1 BOTTLE (71209-082-11) </PackageDescription>
<NDC11Code>71209-0082-11</NDC11Code>
<ProductNDC>71209-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Raloxifene Hydrochloride</ProprietaryName>
<NonProprietaryName>Raloxifene Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171230</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211324</ApplicationNumber>
<LabelerName>Cadila Pharmaceuticals Limited</LabelerName>
<SubstanceName>RALOXIFENE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Raloxifene hydrochloride is an estrogen agonist/antagonist indicated for. Important Limitations: Raloxifene hydrochloride is not indicated for the treatment of invasive breast cancer, reduction of the risk of recurrence of breast cancer, or reduction of risk of noninvasive breast cancer. (1.3).</IndicationAndUsage>
<Description>Raloxifene hydrochloride, USP is an estrogen agonist/antagonist, commonly referred to as a selective estrogen receptor modulator (SERM) that belongs to the benzothiophene class of compounds. The chemical structure is:. The chemical designation is methanone, [6-hydroxy-2-(4-hydroxyphenyl) benzo[b]thien-3-yl]-[4-[2-(1-piperidinyl)ethoxy]phenyl]-, hydrochloride. Raloxifene hydrochloride (HCl), USP has the empirical formula C28H27NO4SHCl, which corresponds to a molecular weight of 510.05. Raloxifene HCl, USP is an off-white to pale-yellow solid that is very slightly soluble in water. Raloxifene hydrochloride, USP is supplied in a tablet dosage form for oral administration. Each raloxifene hydrochloride tablet, USP contains 60 mg of raloxifene HCl, which is the molar equivalent of 55.71 mg of free base. Inactive ingredients include crospovidone, hypromellose, lactose monohydrate, lactose anhydrous, magnesium stearate, polyethylene glycol 400, polysorbate 80, povidone and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>73212-082-11</NDCCode>
<PackageDescription>50 g in 1 BOTTLE (73212-082-11) </PackageDescription>
<NDC11Code>73212-0082-11</NDC11Code>
<ProductNDC>73212-082</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Mk-2866</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20231101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Biopeptek Co., Ltd.</LabelerName>
<SubstanceName>ENOBOSARM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-01-12</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-NOV-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70377-006-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-006-11) </PackageDescription>
<NDC11Code>70377-0006-11</NDC11Code>
<ProductNDC>70377-006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207752</ApplicationNumber>
<LabelerName>Biocon Pharma Inc</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.</IndicationAndUsage>
<Description>Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>70377-007-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-007-11) </PackageDescription>
<NDC11Code>70377-0007-11</NDC11Code>
<ProductNDC>70377-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207752</ApplicationNumber>
<LabelerName>Biocon Pharma Inc</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.</IndicationAndUsage>
<Description>Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>70377-008-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-008-11) </PackageDescription>
<NDC11Code>70377-0008-11</NDC11Code>
<ProductNDC>70377-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207752</ApplicationNumber>
<LabelerName>Biocon Pharma Inc</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.</IndicationAndUsage>
<Description>Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>70377-009-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-009-11) </PackageDescription>
<NDC11Code>70377-0009-11</NDC11Code>
<ProductNDC>70377-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207752</ApplicationNumber>
<LabelerName>Biocon Pharma Inc</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor., 2 As an adjunct to diet to:.</IndicationAndUsage>
<Description>Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is bis[(E)-7-[4(4-fluorophenyl)-6-isopropyl-2[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C22H27FN3O6S)2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white to off-white powder that is soluble in dimethyl formamide, dimethyl sulphoxide, acetonitrile and acetone, slightly soluble in water and methanol. Rosuvastatin calcium USP is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets USP for oral administration contain 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: Each tablet contains: crospovidone, dibasic calcium phosphate dihydrate, iron oxide yellow, iron oxide red, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>70377-010-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70377-010-11) </PackageDescription>
<NDC11Code>70377-0010-11</NDC11Code>
<ProductNDC>70377-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Everolimus</ProprietaryName>
<NonProprietaryName>Everolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214182</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>EVEROLIMUS</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).</IndicationAndUsage>
<Description>Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>70377-011-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70377-011-11) </PackageDescription>
<NDC11Code>70377-0011-11</NDC11Code>
<ProductNDC>70377-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Everolimus</ProprietaryName>
<NonProprietaryName>Everolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214182</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>EVEROLIMUS</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).</IndicationAndUsage>
<Description>Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>70377-012-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70377-012-11) </PackageDescription>
<NDC11Code>70377-0012-11</NDC11Code>
<ProductNDC>70377-012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Everolimus</ProprietaryName>
<NonProprietaryName>Everolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214182</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>EVEROLIMUS</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).</IndicationAndUsage>
<Description>Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>70377-013-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70377-013-11) </PackageDescription>
<NDC11Code>70377-0013-11</NDC11Code>
<ProductNDC>70377-013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Everolimus</ProprietaryName>
<NonProprietaryName>Everolimus</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214182</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>EVEROLIMUS</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Decreased Immunologic Activity [PE], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA], mTOR Inhibitor Immunosuppressant [EPC], mTOR Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Everolimus tablets are kinase inhibitor indicated for the treatment of: 1 Postmenopausal women with advanced hormone receptor-positive, HER2-negative breast cancer in combination with exemestane after failure of treatment with letrozole or anastrozole. (1.1), 2 Adults with renal angiomyolipoma and tuberous sclerosis complex (TSC), not requiring immediate surgery. (1.4)Everolimus tablets are kinase inhibitors indicated for the treatment of adult and pediatric patients aged 1 year and older with TSC who have subependymal giant cell astrocytoma (SEGA) that requires therapeutic intervention but cannot be curatively resected. (1.5).</IndicationAndUsage>
<Description>Everolimus tablets (everolimus) are kinase inhibitors. The chemical name of everolimus is (1R,9S,12S,15R,16E,18R,19R,21R,23S,24E,26E,28E,30S,32S,35R)-1,18- dihydroxy-12-{(1R)-2-[(1S,3R,4R)-4-(2-hydroxyethoxy)-3-methoxycyclohexyl]-1-methylethyl}-19,30-dimethoxy-15,17,21,23,29,35-hexamethyl-11,36-dioxa-4-aza-tricyclo[30.3.1.04,9]hexatriaconta-16,24,26,28-tetraene-2,3,10,14,20-pentaone. The molecular formula is C53H83NO14 and the molecular weight is 958.2 g/mol. The structural formula is. Everolimus tablets for oral administration contains 2.5 mg, 5 mg, 7.5 mg, or 10 mg of everolimus and the following inactive ingredients: anhydrous lactose, butylated hydroxytoluene, crospovidone, hypromellose, lactose monohydrate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>70377-014-11</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (70377-014-11) </PackageDescription>
<NDC11Code>70377-0014-11</NDC11Code>
<ProductNDC>70377-014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tacrolimus</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212297</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tacrolimus capsules are calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants, in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
<Description>Tacrolimus USP, previously known as FK506, is the active ingredient in Tacrolimus capsules, USP. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus USP is designated as 15,19-Epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone 5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hy-droxy-3-methoxy cyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8- (2-propenyl)-, mono-hydrate, [3S [3R*,E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,-14R*,15S*,16R*,18S*,19S*,26aR*]]-; (-)- (3S,4R,5S,8R, 9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24, 25,26,26ahexadecahydro- 5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4- hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16- dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3Hpyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)- te-trone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus USP appears as white to off-white powder. It is soluble in methanol, ethanol, acetone, ethyl acetate and chloroform. Insoluble in water. Tacrolimus USP is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose anhydrous NF, croscarmellose sodium NF, hypromellose USP, magnesium stearate NF. The 0.5 mg capsule shell contains ferric oxide yellow, gelatin NF and titanium dioxide USP, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains ferric oxide red, gelatin NF, and titanium dioxide USP. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of red ink used in Tacrolimus capsules USP, 0.5 mg and 1 mg are Shellac, Propylene glycol, Sodium hydroxide, Titanium dioxide, Povidone and FD&C Red Aluminium Lake. The components of white ink used in Tacrolimus capsules USP, 5 mg are Shellac, Propylene glycol, Ammonia solution, Titanium dioxide and Potassium Hydroxide. Tacrolimus capsules meet USP Organic Impurities, Procedure 2. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70377-015-11</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (70377-015-11) </PackageDescription>
<NDC11Code>70377-0015-11</NDC11Code>
<ProductNDC>70377-015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tacrolimus</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212297</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tacrolimus capsules are calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants, in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
<Description>Tacrolimus USP, previously known as FK506, is the active ingredient in Tacrolimus capsules, USP. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus USP is designated as 15,19-Epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone 5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hy-droxy-3-methoxy cyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8- (2-propenyl)-, mono-hydrate, [3S [3R*,E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,-14R*,15S*,16R*,18S*,19S*,26aR*]]-; (-)- (3S,4R,5S,8R, 9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24, 25,26,26ahexadecahydro- 5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4- hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16- dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3Hpyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)- te-trone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus USP appears as white to off-white powder. It is soluble in methanol, ethanol, acetone, ethyl acetate and chloroform. Insoluble in water. Tacrolimus USP is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose anhydrous NF, croscarmellose sodium NF, hypromellose USP, magnesium stearate NF. The 0.5 mg capsule shell contains ferric oxide yellow, gelatin NF and titanium dioxide USP, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains ferric oxide red, gelatin NF, and titanium dioxide USP. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of red ink used in Tacrolimus capsules USP, 0.5 mg and 1 mg are Shellac, Propylene glycol, Sodium hydroxide, Titanium dioxide, Povidone and FD&C Red Aluminium Lake. The components of white ink used in Tacrolimus capsules USP, 5 mg are Shellac, Propylene glycol, Ammonia solution, Titanium dioxide and Potassium Hydroxide. Tacrolimus capsules meet USP Organic Impurities, Procedure 2. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70377-016-11</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (70377-016-11) </PackageDescription>
<NDC11Code>70377-0016-11</NDC11Code>
<ProductNDC>70377-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tacrolimus</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212297</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tacrolimus capsules are calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants, in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
<Description>Tacrolimus USP, previously known as FK506, is the active ingredient in Tacrolimus capsules, USP. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus USP is designated as 15,19-Epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone 5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hy-droxy-3-methoxy cyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8- (2-propenyl)-, mono-hydrate, [3S [3R*,E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,-14R*,15S*,16R*,18S*,19S*,26aR*]]-; (-)- (3S,4R,5S,8R, 9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24, 25,26,26ahexadecahydro- 5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4- hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16- dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3Hpyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)- te-trone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus USP appears as white to off-white powder. It is soluble in methanol, ethanol, acetone, ethyl acetate and chloroform. Insoluble in water. Tacrolimus USP is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose anhydrous NF, croscarmellose sodium NF, hypromellose USP, magnesium stearate NF. The 0.5 mg capsule shell contains ferric oxide yellow, gelatin NF and titanium dioxide USP, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains ferric oxide red, gelatin NF, and titanium dioxide USP. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of red ink used in Tacrolimus capsules USP, 0.5 mg and 1 mg are Shellac, Propylene glycol, Sodium hydroxide, Titanium dioxide, Povidone and FD&C Red Aluminium Lake. The components of white ink used in Tacrolimus capsules USP, 5 mg are Shellac, Propylene glycol, Ammonia solution, Titanium dioxide and Potassium Hydroxide. Tacrolimus capsules meet USP Organic Impurities, Procedure 2. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70377-017-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70377-017-11) </PackageDescription>
<NDC11Code>70377-0017-11</NDC11Code>
<ProductNDC>70377-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209639</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is practically insoluble in acetone, slightly soluble in ethanol, very slightly soluble in polyethylene glycol and isopropanol, and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablet contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, maize starch B, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
</NDC>
<NDC>
<NDCCode>70377-018-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70377-018-11) </PackageDescription>
<NDC11Code>70377-0018-11</NDC11Code>
<ProductNDC>70377-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230313</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209639</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide tablet is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4-trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the empirical formula is C12H9F3N2O2 with the following chemical structure. Teriflunomide is a white to off-white solid that is practically insoluble in acetone, slightly soluble in ethanol, very slightly soluble in polyethylene glycol and isopropanol, and insoluble in water. Teriflunomide is formulated as film-coated tablets for oral administration. Teriflunomide tablet contain 7 mg or 14 mg of teriflunomide and the following inactive ingredients: colloidal silicon dioxide, maize starch B, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating for the 7 mg and 14 mg tablet contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
</NDC>
<NDC>
<NDCCode>70377-019-11</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (70377-019-11) </PackageDescription>
<NDC11Code>70377-0019-11</NDC11Code>
<ProductNDC>70377-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fingolimod</ProprietaryName>
<NonProprietaryName>Fingolimod</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207979</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
<Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to off white powder that is freely soluble in ethanol, soluble in water and practically insoluble in n-Hexane. It has a molecular weight of 343.93 g/mol. Fingolimod capsules are provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, equivalent to 0.5 mg of fingolimod. Each fingolimod capsule 0.5 mg contains the following inactive ingredients: colloidal silicon dioxide, gelatin, iron oxide yellow, magnesium stearate, microcrystalline cellulose, titanium dioxide. Contains no ingredient made from a gluten-containing grain (wheat, barley, or rye). The components of black ink used in fingolimod capsules, 0.5 mg are Shellac, Black iron oxide and Potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>70377-023-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-023-11) </PackageDescription>
<NDC11Code>70377-0023-11</NDC11Code>
<ProductNDC>70377-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin</ProprietaryName>
<NonProprietaryName>Dapagliflozin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211470</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN 2,3-BUTANEDIOL MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin tablets are indicated: 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S, 3R, 4R, 5S, 6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxyl methyl) tetrahydro-2H-pyran-3,4,5-triol compound with meso-butane 2,3-diol (1:1) hydrate. The empirical formula is C25H37ClO9 and the molecular weight is 517.01. The structural formula is. Dapagliflozin is available as a film-coated tablet for oral administration containing the equivalent of 5 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate or the equivalent of 10 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate, and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, magnesium stearate and microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Contains no ingredient made from a gluten containing grain (wheat, barley, or rye).</Description>
</NDC>
<NDC>
<NDCCode>70377-024-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70377-024-11) </PackageDescription>
<NDC11Code>70377-0024-11</NDC11Code>
<ProductNDC>70377-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin</ProprietaryName>
<NonProprietaryName>Dapagliflozin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211470</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN 2,3-BUTANEDIOL MONOHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin tablets are indicated: 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S, 3R, 4R, 5S, 6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxyl methyl) tetrahydro-2H-pyran-3,4,5-triol compound with meso-butane 2,3-diol (1:1) hydrate. The empirical formula is C25H37ClO9 and the molecular weight is 517.01. The structural formula is. Dapagliflozin is available as a film-coated tablet for oral administration containing the equivalent of 5 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate or the equivalent of 10 mg dapagliflozin as dapagliflozin butane-2,3-diol monohydrate, and the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, magnesium stearate and microcrystalline cellulose. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. Contains no ingredient made from a gluten containing grain (wheat, barley, or rye).</Description>
</NDC>
<NDC>
<NDCCode>70377-027-11</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (70377-027-11) </PackageDescription>
<NDC11Code>70377-0027-11</NDC11Code>
<ProductNDC>70377-027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium, Film Coated</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209912</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.,</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>70377-028-11</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (70377-028-11) </PackageDescription>
<NDC11Code>70377-0028-11</NDC11Code>
<ProductNDC>70377-028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium, Film Coated</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209912</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.,</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>70377-029-11</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (70377-029-11) </PackageDescription>
<NDC11Code>70377-0029-11</NDC11Code>
<ProductNDC>70377-029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium, Film Coated</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209912</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.,</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>70377-030-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70377-030-11) </PackageDescription>
<NDC11Code>70377-0030-11</NDC11Code>
<ProductNDC>70377-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium, Film Coated</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209912</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.,</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium, USP is [R-(R*, R*)]-2-(4-fluorophenyl)-ß,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium is (C33 H34FN2O5)2 Ca3H2O and its molecular weight is 1209.42. Its structural formula is. Atorvastatin calcium USP is a white to off-white crystalline powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets, USP for oral administration contain 10 mg, 20 mg, 40 mg, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate, croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry White YS-1-7040 (hypromellose, polyethylene glycol, talc, titanium dioxide) and polysorbate 80. Atorvastatin Calcium Tablets, USP meets the requirements of USP dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>70377-031-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70377-031-11) </PackageDescription>
<NDC11Code>70377-0031-11</NDC11Code>
<ProductNDC>70377-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213680</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain sacubitril sodium and valsartan disodium in the molar ratio of 1:1 respectively. Sacubitril sodium is chemically described as Sodium 4-(((2S, 4R)-1- ([1,1ʹ-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl) amino)-4-oxo butanoate. Valsartan disodium is chemically described as (S)-3-methyl-2-(N-{[2'-(2H-1,2,3,4-tetrazol-5-yl)biphenyl- 4-yl]methyl}pentanamido)disodium butanoate. Empirical formula of sacubitril sodium and valsartan disodium are C24H28NO5Na and C24H27N5Na2O3 respectively. Molecular mass of Sacubitril sodium and Valsartan disodium are 433.48 and 479.49 g/mol respectively. Molecular structure of both drug substances are as below. Sacubitril sodium. Valsartan disodium. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are gmcc (glyceryl monocaprylocaprate) type 1 / glycerol esters of fatty acids, polyvinyl alcohol-part. hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>70377-032-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70377-032-11) </PackageDescription>
<NDC11Code>70377-0032-11</NDC11Code>
<ProductNDC>70377-032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213680</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain sacubitril sodium and valsartan disodium in the molar ratio of 1:1 respectively. Sacubitril sodium is chemically described as Sodium 4-(((2S, 4R)-1- ([1,1ʹ-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl) amino)-4-oxo butanoate. Valsartan disodium is chemically described as (S)-3-methyl-2-(N-{[2'-(2H-1,2,3,4-tetrazol-5-yl)biphenyl- 4-yl]methyl}pentanamido)disodium butanoate. Empirical formula of sacubitril sodium and valsartan disodium are C24H28NO5Na and C24H27N5Na2O3 respectively. Molecular mass of Sacubitril sodium and Valsartan disodium are 433.48 and 479.49 g/mol respectively. Molecular structure of both drug substances are as below. Sacubitril sodium. Valsartan disodium. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are gmcc (glyceryl monocaprylocaprate) type 1 / glycerol esters of fatty acids, polyvinyl alcohol-part. hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>70377-033-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70377-033-11) </PackageDescription>
<NDC11Code>70377-0033-11</NDC11Code>
<ProductNDC>70377-033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213680</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain sacubitril sodium and valsartan disodium in the molar ratio of 1:1 respectively. Sacubitril sodium is chemically described as Sodium 4-(((2S, 4R)-1- ([1,1ʹ-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl) amino)-4-oxo butanoate. Valsartan disodium is chemically described as (S)-3-methyl-2-(N-{[2'-(2H-1,2,3,4-tetrazol-5-yl)biphenyl- 4-yl]methyl}pentanamido)disodium butanoate. Empirical formula of sacubitril sodium and valsartan disodium are C24H28NO5Na and C24H27N5Na2O3 respectively. Molecular mass of Sacubitril sodium and Valsartan disodium are 433.48 and 479.49 g/mol respectively. Molecular structure of both drug substances are as below. Sacubitril sodium. Valsartan disodium. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropylcellulose, magnesium stearate (vegetable origin), microcrystalline cellulose, and talc. The film-coat inactive ingredients are gmcc (glyceryl monocaprylocaprate) type 1 / glycerol esters of fatty acids, polyvinyl alcohol-part. hydrolyzed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet and the 97 mg of sacubitril and 103 mg of valsartan tablet also contains iron oxide black and iron oxide red. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>70377-034-11</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70377-034-11) </PackageDescription>
<NDC11Code>70377-0034-11</NDC11Code>
<ProductNDC>70377-034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190128</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211020</ApplicationNumber>
<LabelerName>Biocon Pharma Inc.,</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (XL) are an aminoketone antidepressant, indicated for: 1 treatment of major depressive disorder (MDD) (1.1), 2 prevention of seasonal affective disorder (SAD) (1.2).</IndicationAndUsage>
<Description>Bupropion hydrochloride USP, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white and soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg which are white to pale yellow round biconvex coated tablets imprinted with '188' and '189' in black ink on one side and plain on other side respectively. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ethylcellulose, glyceryl behenate, hydrochloric acid, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, methylene chloride, opadry®(it contains hypromellose, tricetin and talc), opacode® (it contains shellac glaze, ferrosoferric oxide, propylene glycol and ammonium hydroxide), polyethylene glycol, povidone, silicon dioxide and triethyl citrate. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. The drug Product meets the requirements of USP Dissolution Test 14.</Description>
</NDC>
</NDCList>