{
"NDC": [
{
"NDCCode": "70385-2033-1",
"PackageDescription": "1 VIAL in 1 PACKAGE (70385-2033-1) / 1 mL in 1 VIAL",
"NDC11Code": "70385-2033-01",
"ProductNDC": "70385-2033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Naloxone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20170808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207633",
"LabelerName": "Sina Health Inc",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170808",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone Hydrochloride Injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol, and cyclazocine. Naloxone hydrochloride is also indicated for the diagnosis of suspected or known acute opioid overdosage. Naloxone may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).",
"Description": "Naloxone Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4.0 (3.0 to 6.5). The single-dose solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required, the unused portion should be discarded. Naloxone Hydrochloride Injection, USP may be administered intravenously, intramuscularly, or subcutaneously. Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. It differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone Hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C 19H 21NO 4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula:."
},
{
"NDCCode": "70385-2002-1",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BAG (70385-2002-1) > 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "70385-2002-01",
"ProductNDC": "70385-2002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flumazenil",
"NonProprietaryName": "Flumazenil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078527",
"LabelerName": "Sina Health Inc",
"SubstanceName": "FLUMAZENIL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180702",
"SamplePackage": "N",
"IndicationAndUsage": "Flumazenil Injection, USP is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.",
"Description": "Flumazenil Injection, USP is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo[1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure, a calculated molecular weight of 303.3, and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol: buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to approximately 4 with hydrochloric acid and/or, if necessary, sodium hydroxide."
},
{
"NDCCode": "70385-2003-3",
"PackageDescription": "3 AMPULE in 1 BAG (70385-2003-3) > .33 mL in 1 AMPULE",
"NDC11Code": "70385-2003-03",
"ProductNDC": "70385-2003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ammonia Inhalants",
"NonProprietaryName": "Ammonia Inhalants",
"DosageFormName": "INHALANT",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19760214",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Sina Health Inc",
"SubstanceName": "AMMONIA",
"StrengthNumber": ".045",
"StrengthUnit": "g/.3mL",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160418",
"SamplePackage": "N",
"IndicationAndUsage": "To prevent or treat fainting."
},
{
"NDCCode": "70385-2005-2",
"PackageDescription": "2 PACKET in 1 BAG (70385-2005-2) > 2 TABLET, FILM COATED in 1 PACKET",
"NDC11Code": "70385-2005-02",
"ProductNDC": "70385-2005",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aspirin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110725",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Sina Health Inc",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170703",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily relieves minor aches and pains associated with: 1 headache , 2 minor arthritis pain , 3 common cold , 4 menstrual cramps , 5 muscular aches , 6 backache , 7 toothache ."
},
{
"NDCCode": "70385-2006-2",
"PackageDescription": "2 PACKET in 1 PACKAGE (70385-2006-2) / 2 TABLET, FILM COATED in 1 PACKET",
"NDC11Code": "70385-2006-02",
"ProductNDC": "70385-2006",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aspirin Packs",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200720",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Sina Health Inc",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200720",
"SamplePackage": "N",
"IndicationAndUsage": "Uses. Temporarily relieves: 1 headache, 2 toothache, 3 pain and fever of colds, 4 muscle pain, 5 menstrual pain, 6 minor pain of arthritis."
},
{
"NDCCode": "70385-2007-2",
"PackageDescription": "2 VIAL in 1 PACKAGE (70385-2007-2) > 1 mL in 1 VIAL",
"NDC11Code": "70385-2007-02",
"ProductNDC": "70385-2007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenhydramine Hydrochloride",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19721127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080817",
"LabelerName": "Sina Health Inc",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170703",
"SamplePackage": "N",
"IndicationAndUsage": "Diphenhydramine Hydrochloride Injection is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when the oral form is impractical.",
"Description": "Diphenhydramine Hydrochloride Injection is a sterile, nonpyrogenic solution for intravenous or deep intramuscular use as an antihistaminic agent. Each mL contains diphenhydramine hydrochloride 50 mg and benzethonium chloride 100 mcg in Water for Injection. pH 4.0-6.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The chemical name of diphenhydramine hydrochloride is 2-(Diphenylmethoxy)-N,N-dimethylethylamine hydrochloride. The structural formula is as follows. C 17H 21NO HCl MW 291.82. Diphenhydramine hydrochloride occurs as a white crystalline powder and is freely soluble in water and alcohol."
},
{
"NDCCode": "70385-2008-2",
"PackageDescription": "2 AMPULE in 1 BAG (70385-2008-2) > 1 mL in 1 AMPULE",
"NDC11Code": "70385-2008-02",
"ProductNDC": "70385-2008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20050908",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170703",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine is used to relieve respiratory distress due to bronchospasm, to provide rapid relief of hypersensitivity reactions to drugs and other allergens, and to prolong the action of anesthetics. Its cardiac effects may be of use in restoring cardiac rhythm in cardiac arrest due to various causes, but it is not used in cardiac failure or in hemorrhagic, traumatic, or cardiogenic shock. Epinephrine is used as a hemostatic agent. It is also used in treating mucosal congestion of hay fever, rhinitis, and acute sinusitis; to relieve bronchial asthmatic paroxysms; in syncope due to complete heart block or carotid sinus hypersensitivity; for symptomatic relief of serum sickness, urticaria, angioneurotic edema; for resuscitation in cardiac arrest following anesthetic accidents; in simple (open angle) glaucoma; for relaxation of uterine musculature and to inhibit uterine contractions. Epinephrine Injection can be utilized to prolong the action of anesthetics used in local and regional anesthesia.",
"Description": "Epinephrine Injection, USP 1:1000 is a sterile, nonpyrogenic solution. Each mL contains epinephrine 1 mg; sodium chloride 9 mg; sodium metabisulfite 0.9 mg added. May contain hydrochloric acid for pH adjustment. The solution contains no bacteriostat or antimicrobial agent. It is administered by the following routes: intravenous, intracardiac (left ventricular chamber), via endotracheal tube into the bronchial tree, subcutaneous or intramuscular. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4‑[1‑hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white, crystalline compound freely soluble in water."
},
{
"NDCCode": "70385-2009-1",
"PackageDescription": "1 CASE in 1 BAG (70385-2009-1) > 1 SYRINGE, GLASS in 1 CASE > .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "70385-2009-01",
"ProductNDC": "70385-2009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170703",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection, USP auto-injector is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injector is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection, USP auto-injector is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.",
"Description": "Epinephrine injection, USP auto-injector 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP auto-injector 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP auto-injector 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP auto-injector 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP auto-injector 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [ see Patient Counseling Information ( 17) ]."
},
{
"NDCCode": "70385-2013-1",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 BAG (70385-2013-1) > 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "70385-2013-01",
"ProductNDC": "70385-2013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naloxone Hydrochloride",
"NonProprietaryName": "Naloxone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19870107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070256",
"LabelerName": "Sina Health Inc",
"SubstanceName": "NALOXONE HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Opioid Antagonist [EPC],Opioid Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170703",
"SamplePackage": "N",
"IndicationAndUsage": "Naloxone Hydrochloride Injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for the diagnosis of suspected or known acute opioid overdosage. Naloxone may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY, Adjunctive Use in Septic Shock).",
"Description": "Naloxone Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4.0 (3.0 to 6.5). The single-dose solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required, the unused portion should be discarded. The multiple-dose solution contains, in addition, 1.8 mg/mL methylparaben and 0.2 mg/mL propylparaben added as preservatives. Naloxone Hydrochloride Injection, USP may be administered intravenously, intramuscularly, or subcutaneously. Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. It differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone Hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C 19H 21NO 4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula:."
},
{
"NDCCode": "70385-2014-1",
"PackageDescription": "1 BOTTLE in 1 BAG (70385-2014-1) > 25 TABLET in 1 BOTTLE",
"NDC11Code": "70385-2014-01",
"ProductNDC": "70385-2014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrostat",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20000501",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021134",
"LabelerName": "Sina Health Inc",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170703",
"SamplePackage": "N",
"IndicationAndUsage": "Nitroglycerin is indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.",
"Description": "NITROSTAT is a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg , or 0.6 mg nitroglycerin; as well as lactose monohydrate, NF; glyceryl monostearate, NF; pregelatinized starch, NF; calcium stearate, NF powder; and silicon dioxide, colloidal, NF. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is. Molecular weight: 227.09."
},
{
"NDCCode": "70385-2016-1",
"PackageDescription": "1 VIAL in 1 BAG (70385-2016-1) > 2 mL in 1 VIAL",
"NDC11Code": "70385-2016-01",
"ProductNDC": "70385-2016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solu-medrol",
"NonProprietaryName": "Methylprednisolone Sodium Succinate",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "19590402",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011856",
"LabelerName": "Sina Health Inc",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "125",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of SOLU-MEDROL Sterile Powder is indicated as follows:.",
"Description": "SOLU-MEDROL Sterile Powder is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt. (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. SOLU-MEDROL is available in preservative and preservative-free formulations. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1 gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline = 0.28 osmolar.)."
},
{
"NDCCode": "70385-2017-1",
"PackageDescription": "1 CASE in 1 BAG (70385-2017-1) > 1 SYRINGE, GLASS in 1 CASE > .15 mL in 1 SYRINGE, GLASS",
"NDC11Code": "70385-2017-01",
"ProductNDC": "70385-2017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.15mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170409",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection, USP auto-injector is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injector is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection, USP auto-injector is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.",
"Description": "Epinephrine injection, USP auto-injector 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP auto-injector 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP auto-injector 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP auto-injector 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP auto-injector 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see Patient Counseling Information ( 17) ]."
},
{
"NDCCode": "70385-2018-1",
"PackageDescription": "1 BOTTLE in 1 BAG (70385-2018-1) > 25 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE",
"NDC11Code": "70385-2018-01",
"ProductNDC": "70385-2018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20160826",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021134",
"LabelerName": "Sina Health Inc",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170409",
"SamplePackage": "N",
"IndicationAndUsage": "Nitroglycerin is indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.",
"Description": "Nitroglycerin tablets are stabilized sublingual compressed tablets that contain 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin; as well as lactose monohydrate, NF; glyceryl monostearate, NF; pregelatinized starch, NF; calcium stearate, NF powder; and silicon dioxide, colloidal, NF. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is. Molecular weight: 227.09."
},
{
"NDCCode": "70385-2019-1",
"PackageDescription": "1 CONTAINER in 1 PACKAGE (70385-2019-1) / 1 SYRINGE, GLASS in 1 CONTAINER / .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "70385-2019-01",
"ProductNDC": "70385-2019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine 0.3 Adults",
"NonProprietaryName": "Epinephrine 0.3 Adults",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20161215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019430",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161215",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.",
"Description": "Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [ see Patient Counseling Information (17)]."
},
{
"NDCCode": "70385-2020-1",
"PackageDescription": "1 CONTAINER in 1 PACKAGE (70385-2020-1) / 1 SYRINGE, GLASS in 1 CONTAINER / .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "70385-2020-01",
"ProductNDC": "70385-2020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine 0.15 Pediatrics",
"NonProprietaryName": "Epinephrine 0.15 Pediatrics",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20161215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019430",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161215",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.",
"Description": "Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [ see Patient Counseling Information (17)]."
},
{
"NDCCode": "70385-2021-1",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BAG (70385-2021-1) > 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "70385-2021-01",
"ProductNDC": "70385-2021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flumazenil",
"NonProprietaryName": "Flumazenil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20070101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078527",
"LabelerName": "Sina Health Inc",
"SubstanceName": "FLUMAZENIL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Flumazenil Injection, USP is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.",
"Description": "Flumazenil Injection, USP is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo[1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure, a calculated molecular weight of 303.3, and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol: buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to approximately 4 with hydrochloric acid and/or, if necessary, sodium hydroxide."
},
{
"NDCCode": "70385-2022-1",
"PackageDescription": "1 CASE in 1 PACKAGE (70385-2022-1) / 1 SYRINGE, GLASS in 1 CASE / .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "70385-2022-01",
"ProductNDC": "70385-2022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine 0.3 Adults",
"NonProprietaryName": "Epinephrine 0.3 Adults",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100401",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.",
"Description": "Epinephrine injection, USP 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP with patients and caregivers prior to use [see Patient Counseling Information ( 17) ]."
},
{
"NDCCode": "70385-2024-2",
"PackageDescription": "2 VIAL in 1 PACKAGE (70385-2024-2) / 1 mL in 1 VIAL",
"NDC11Code": "70385-2024-02",
"ProductNDC": "70385-2024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adrenalin Vials",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20130701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204200",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130701",
"SamplePackage": "N",
"IndicationAndUsage": "Adrenalin ®is a non-selective alpha and beta adrenergic agonist indicated for: : 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis ( 1.1) , 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock ( 1.2) .",
"Description": "Adrenalin (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL epinephrine, packaged as 1 mL of solution in a single dose clear glass vial or 30 mL of solution in a multiple dose amber glass vial. In the 1 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 7.3 mg sodium chloride, 0.457 mg sodium metabisulfite, 1 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.32 mg of 4% hydrochloric acid to adjust pH, and water for injection. In the 30 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.18 mg of 4% hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin."
},
{
"NDCCode": "70385-2038-1",
"PackageDescription": "1 CASE in 1 PACKAGE (70385-2038-1) / 1 SYRINGE, GLASS in 1 CASE / .15 mL in 1 SYRINGE, GLASS",
"NDC11Code": "70385-2038-01",
"ProductNDC": "70385-2038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine Pediatrics",
"NonProprietaryName": "Epinephrine 0.15 Pediatrics",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Sina Health Inc",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.15mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100401",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.",
"Description": "Epinephrine injection, USP 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP with patients and caregivers prior to use [see Patient Counseling Information ( 17) ]."
},
{
"NDCCode": "0254-2033-73",
"PackageDescription": "3 CARTON in 1 CARTON (0254-2033-73) > 1 BLISTER PACK in 1 CARTON > 1 KIT in 1 BLISTER PACK",
"NDC11Code": "00254-2033-73",
"ProductNDC": "0254-2033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Emoquette",
"NonProprietaryName": "Desogestrel And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20190408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202789",
"LabelerName": "Par Pharmaceutical, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190408",
"SamplePackage": "N",
"IndicationAndUsage": "Emoquette® (desogestrel and ethinyl estradiol tablets) are indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table 1 lists the typical accidental pregnancy rates for users of combined oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and the Norplant System depends upon the reliability with which they are used. Correct and consistent use of these methods can result in lower failure rates. In a clinical trial with desogestrel and ethinyl estradiol tablets, 1,195 subjects completed 11,656 cycles and a total of 10 pregnancies were reported. This represents an overall user-efficacy (typical user-efficacy) pregnancy rate of 1.12 per 100 women-years. This rate includes patients who did not take the drug correctly. aAmong couples attempting to avoid pregnancy, the percentage who continue to use a method for one year. bAmong typical couples who initiate use of a method (not necessarily for the first time), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. cAmong couples who initiate use of a method (not necessarily for the first time) and who use it perfectly (both consistently and correctly), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. dThe treatment schedule is one dose within 72 hours after unprotected intercourse, and a second dose 12 hours after the first dose. The FDA has declared the following brands of oral contraceptives to be safe and effective for emergency contraception: Ovral® (1 dose is 2 white pills), Alesse® (1 dose is 5 pink pills), Nordette® or Levlen® (1 dose is 4 yellow pills). eHowever, to maintain effective protection against pregnancy, another method of contraception must be used as soon as menstruation resumes, the frequency of duration of breastfeeds is reduced, bottle feeds are introduced, or the baby reaches 6 months of age. fThe percents becoming pregnant in columns (2) and (3) are based on data from populations where contraception is not used and from women who cease using contraception in order to become pregnant. Among such populations, about 89% become pregnant within one year. This estimate was lowered slightly (to 85%) to represent the percent who would become pregnant within one year among women now relying on reversible methods of contraception if they abandoned contraception altogether. gFoams, creams, gels, vaginal suppositories, and vaginal film. hCervical mucus (ovulation) method supplemented by calendar in the pre-ovulatory and basal body temperature in the post-ovulatory phases. iWith spermicidal cream or jelly. jWithout spermicides. Desogestrel and ethinyl estradiol tablets have not been studied for and are not indicated for use in emergency contraception.",
"Description": "Emoquette® (desogestrel and ethinyl estradiol tablets, USP) provide an oral contraceptive regimen of 21 orange round tablets each containing 0.15 mg desogestrel (13-ethyl-11-methylene-18,19-dinor-17 alpha-pregn-4-en- 20-yn-17-ol) and 0.03 mg ethinyl estradiol (19-nor-17 alpha-pregna-1,3,5 (10)-trien-20-yne-3,17,diol). Inactive ingredients include alpha-tocopherol, colloidal silicon dioxide, corn starch, FD&C yellow 5 aluminum lake, FD&C yellow 6 aluminum lake, hypromellose 2910, lactose monohydrate, polysorbate, povidone, red iron oxide, stearic acid, titanium dioxide and triacetin. Each green tablet contains the following inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue 2 aluminum lake, hypromellose 2910, lactose monohydrate, magnesium stearate, polysorbate, povidone, titanium dioxide, triacetin, and yellow iron oxide. USP Dissolution Test 2 used."
},
{
"NDCCode": "0254-2033-80",
"PackageDescription": "6 CARTON in 1 CARTON (0254-2033-80) > 1 BLISTER PACK in 1 CARTON > 1 KIT in 1 BLISTER PACK",
"NDC11Code": "00254-2033-80",
"ProductNDC": "0254-2033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Emoquette",
"NonProprietaryName": "Desogestrel And Ethinyl Estradiol",
"DosageFormName": "KIT",
"StartMarketingDate": "20190408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202789",
"LabelerName": "Par Pharmaceutical, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190408",
"SamplePackage": "N",
"IndicationAndUsage": "Emoquette® (desogestrel and ethinyl estradiol tablets) are indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table 1 lists the typical accidental pregnancy rates for users of combined oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and the Norplant System depends upon the reliability with which they are used. Correct and consistent use of these methods can result in lower failure rates. In a clinical trial with desogestrel and ethinyl estradiol tablets, 1,195 subjects completed 11,656 cycles and a total of 10 pregnancies were reported. This represents an overall user-efficacy (typical user-efficacy) pregnancy rate of 1.12 per 100 women-years. This rate includes patients who did not take the drug correctly. aAmong couples attempting to avoid pregnancy, the percentage who continue to use a method for one year. bAmong typical couples who initiate use of a method (not necessarily for the first time), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. cAmong couples who initiate use of a method (not necessarily for the first time) and who use it perfectly (both consistently and correctly), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. dThe treatment schedule is one dose within 72 hours after unprotected intercourse, and a second dose 12 hours after the first dose. The FDA has declared the following brands of oral contraceptives to be safe and effective for emergency contraception: Ovral® (1 dose is 2 white pills), Alesse® (1 dose is 5 pink pills), Nordette® or Levlen® (1 dose is 4 yellow pills). eHowever, to maintain effective protection against pregnancy, another method of contraception must be used as soon as menstruation resumes, the frequency of duration of breastfeeds is reduced, bottle feeds are introduced, or the baby reaches 6 months of age. fThe percents becoming pregnant in columns (2) and (3) are based on data from populations where contraception is not used and from women who cease using contraception in order to become pregnant. Among such populations, about 89% become pregnant within one year. This estimate was lowered slightly (to 85%) to represent the percent who would become pregnant within one year among women now relying on reversible methods of contraception if they abandoned contraception altogether. gFoams, creams, gels, vaginal suppositories, and vaginal film. hCervical mucus (ovulation) method supplemented by calendar in the pre-ovulatory and basal body temperature in the post-ovulatory phases. iWith spermicidal cream or jelly. jWithout spermicides. Desogestrel and ethinyl estradiol tablets have not been studied for and are not indicated for use in emergency contraception.",
"Description": "Emoquette® (desogestrel and ethinyl estradiol tablets, USP) provide an oral contraceptive regimen of 21 orange round tablets each containing 0.15 mg desogestrel (13-ethyl-11-methylene-18,19-dinor-17 alpha-pregn-4-en- 20-yn-17-ol) and 0.03 mg ethinyl estradiol (19-nor-17 alpha-pregna-1,3,5 (10)-trien-20-yne-3,17,diol). Inactive ingredients include alpha-tocopherol, colloidal silicon dioxide, corn starch, FD&C yellow 5 aluminum lake, FD&C yellow 6 aluminum lake, hypromellose 2910, lactose monohydrate, polysorbate, povidone, red iron oxide, stearic acid, titanium dioxide and triacetin. Each green tablet contains the following inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue 2 aluminum lake, hypromellose 2910, lactose monohydrate, magnesium stearate, polysorbate, povidone, titanium dioxide, triacetin, and yellow iron oxide. USP Dissolution Test 2 used."
},
{
"NDCCode": "0703-2033-03",
"PackageDescription": "10 CARTON in 1 BOX (0703-2033-03) / 1 VIAL, SINGLE-DOSE in 1 CARTON / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00703-2033-03",
"ProductNDC": "0703-2033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180904",
"EndMarketingDate": "20250131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204960",
"LabelerName": "Teva Parenteral Medicines, Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180904",
"EndMarketingDatePackage": "20250131",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium Besylate Injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.",
"Description": "Cisatracurium Besylate Injection, USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R- [1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4- dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multiple-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8."
},
{
"NDCCode": "14222-2033-1",
"PackageDescription": "1 BOTTLE in 1 CARTON (14222-2033-1) / 50 mL in 1 BOTTLE",
"NDC11Code": "14222-2033-01",
"ProductNDC": "14222-2033",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Radiant Defense Perfecting Liquid Broad Spectrum Spf 30 - Sand",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200310",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Rodan & Fields",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "3.44; 4",
"StrengthUnit": "g/100mL; g/100mL",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200310",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions]. decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "17630-2033-1",
"PackageDescription": "177 mL in 1 CAN (17630-2033-1)",
"NDC11Code": "17630-2033-01",
"ProductNDC": "17630-2033",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Banana Boat Ultra Defense Sheer Protect Spf 50",
"NonProprietaryName": "Avobenzone And Octocrylene And Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090915",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Accra-Pac, Inc.",
"SubstanceName": "AVOBENZONE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": ".03; .1; .05",
"StrengthUnit": "mL/mL; mL/mL; mL/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "helps prevent sunburn.",
"Description": "Sunscreen."
},
{
"NDCCode": "17630-2033-2",
"PackageDescription": "236 mL in 1 CAN (17630-2033-2)",
"NDC11Code": "17630-2033-02",
"ProductNDC": "17630-2033",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Banana Boat Ultra Defense Sheer Protect Spf 50",
"NonProprietaryName": "Avobenzone And Octocrylene And Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090915",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Accra-Pac, Inc.",
"SubstanceName": "AVOBENZONE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": ".03; .1; .05",
"StrengthUnit": "mL/mL; mL/mL; mL/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "helps prevent sunburn.",
"Description": "Sunscreen."
},
{
"NDCCode": "37662-2033-1",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-2033-1) ",
"NDC11Code": "37662-2033-01",
"ProductNDC": "37662-2033",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Petroleum",
"NonProprietaryName": "Petroleum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221129",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "KEROSENE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_Q]/1",
"Status": "Active",
"LastUpdate": "2022-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221129",
"SamplePackage": "N"
},
{
"NDCCode": "43742-2033-1",
"PackageDescription": "960 mL in 1 BOTTLE, PLASTIC (43742-2033-1) ",
"NDC11Code": "43742-2033-01",
"ProductNDC": "43742-2033",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Echinacea (angustifolia), Hydrastis Canadensis, Nasturtium Aquaticum, Thuja Occidentalis, Thymus (suis), Eupatorium Perfoliatum, Gelsemium Sempervirens, Iodium, Lachesis Mutus, Lycopodium Clavatum, Nux Vomica, Phosphoricum Acidum, Phosphorus, Selenium Metallicum, Zincum Metallicum, Herpes Simplex I And Ii Nosode, Herpes Zoster Nosode, Poliomyelitis Nosode, Epstein Barr Virus Nosode, Cytomegalovirus Nosode, Morbillinum, Parotidinum, Rubella Nosode, Pyrogenium, Hepatitis B Nosode, Coxsackie B1 Nosode,",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20201008",
"EndMarketingDate": "20260201",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "ANTIMONY TRISULFIDE; ECHINACEA ANGUSTIFOLIA; EUPATORIUM PERFOLIATUM FLOWERING TOP; GELSEMIUM SEMPERVIRENS ROOT; GOLDENSEAL; HEPATITIS B VIRUS; HUMAN COXSACKIEVIRUS B1; HUMAN COXSACKIEVIRUS B4; HUMAN HERPESVIRUS 1; HUMAN HERPESVIRUS 2; HUMAN HERPESVIRUS 3; HUMAN HERPESVIRUS 4; HUMAN HERPESVIRUS 5; IODINE; LACHESIS MUTA VENOM; LEDUM PALUSTRE TWIG; LYCOPODIUM CLAVATUM SPORE; MEASLES VIRUS; MUMPS VIRUS; NASTURTIUM OFFICINALE; PHOSPHORIC ACID; PHOSPHORUS; POLIOVIRUS; RANCID BEEF; RUBELLA VIRUS; SELENIUM; STRYCHNOS NUX-VOMICA SEED; SUS SCROFA THYMUS; THIMEROSAL; THUJA OCCIDENTALIS LEAFY TWIG; ZINC",
"StrengthNumber": "30; 6; 12; 12; 6; 33; 11; 18; 15; 15; 15; 18; 20; 12; 12; 30; 12; 30; 30; 6; 12; 12; 15; 30; 30; 12; 12; 8; 30; 6; 12",
"StrengthUnit": "[hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "08-OCT-20",
"EndMarketingDatePackage": "01-FEB-26"
},
{
"NDCCode": "48951-2033-1",
"PackageDescription": "10 AMPULE in 1 BOX (48951-2033-1) > 1 mL in 1 AMPULE",
"NDC11Code": "48951-2033-01",
"ProductNDC": "48951-2033",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Belladonna Ex Herba 6",
"NonProprietaryName": "Belladonna Ex Herba 6",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Uriel Pharmacy Inc.",
"SubstanceName": "ATROPA BELLADONNA",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20090901",
"SamplePackage": "N",
"IndicationAndUsage": "Directions: FOR ORAL USE."
},
{
"NDCCode": "49817-2033-1",
"PackageDescription": "1 BOTTLE in 1 BOX (49817-2033-1) > 30 mL in 1 BOTTLE",
"NDC11Code": "49817-2033-01",
"ProductNDC": "49817-2033",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Plessentiel Natural Glow Foundation 16h Wear With Sunscreen Broad Spectrum Spf 20",
"ProprietaryNameSuffix": "00n Porcelaine/porcelain",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190309",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Guerlain",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "17.6",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190309",
"SamplePackage": "N"
},
{
"NDCCode": "49817-2033-3",
"PackageDescription": "1 BOTTLE in 1 BOX (49817-2033-3) > 15 mL in 1 BOTTLE",
"NDC11Code": "49817-2033-03",
"ProductNDC": "49817-2033",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Plessentiel Natural Glow Foundation 16h Wear With Sunscreen Broad Spectrum Spf 20",
"ProprietaryNameSuffix": "00n Porcelaine/porcelain",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190309",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Guerlain",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "17.6",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190309",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70385-2033-1</NDCCode>
<PackageDescription>1 VIAL in 1 PACKAGE (70385-2033-1) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>70385-2033-01</NDC11Code>
<ProductNDC>70385-2033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207633</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone Hydrochloride Injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol, and cyclazocine. Naloxone hydrochloride is also indicated for the diagnosis of suspected or known acute opioid overdosage. Naloxone may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY; Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4.0 (3.0 to 6.5). The single-dose solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required, the unused portion should be discarded. Naloxone Hydrochloride Injection, USP may be administered intravenously, intramuscularly, or subcutaneously. Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. It differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone Hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C 19H 21NO 4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>70385-2002-1</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BAG (70385-2002-1) > 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>70385-2002-01</NDC11Code>
<ProductNDC>70385-2002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flumazenil</ProprietaryName>
<NonProprietaryName>Flumazenil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078527</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>FLUMAZENIL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Flumazenil Injection, USP is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.</IndicationAndUsage>
<Description>Flumazenil Injection, USP is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo[1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure, a calculated molecular weight of 303.3, and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol: buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to approximately 4 with hydrochloric acid and/or, if necessary, sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>70385-2003-3</NDCCode>
<PackageDescription>3 AMPULE in 1 BAG (70385-2003-3) > .33 mL in 1 AMPULE</PackageDescription>
<NDC11Code>70385-2003-03</NDC11Code>
<ProductNDC>70385-2003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ammonia Inhalants</ProprietaryName>
<NonProprietaryName>Ammonia Inhalants</NonProprietaryName>
<DosageFormName>INHALANT</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19760214</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>AMMONIA</SubstanceName>
<StrengthNumber>.045</StrengthNumber>
<StrengthUnit>g/.3mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160418</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To prevent or treat fainting.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70385-2005-2</NDCCode>
<PackageDescription>2 PACKET in 1 BAG (70385-2005-2) > 2 TABLET, FILM COATED in 1 PACKET</PackageDescription>
<NDC11Code>70385-2005-02</NDC11Code>
<ProductNDC>70385-2005</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aspirin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110725</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily relieves minor aches and pains associated with: 1 headache , 2 minor arthritis pain , 3 common cold , 4 menstrual cramps , 5 muscular aches , 6 backache , 7 toothache .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70385-2006-2</NDCCode>
<PackageDescription>2 PACKET in 1 PACKAGE (70385-2006-2) / 2 TABLET, FILM COATED in 1 PACKET</PackageDescription>
<NDC11Code>70385-2006-02</NDC11Code>
<ProductNDC>70385-2006</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aspirin Packs</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200720</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses. Temporarily relieves: 1 headache, 2 toothache, 3 pain and fever of colds, 4 muscle pain, 5 menstrual pain, 6 minor pain of arthritis.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70385-2007-2</NDCCode>
<PackageDescription>2 VIAL in 1 PACKAGE (70385-2007-2) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>70385-2007-02</NDC11Code>
<ProductNDC>70385-2007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19721127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080817</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diphenhydramine Hydrochloride Injection is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when the oral form is impractical.</IndicationAndUsage>
<Description>Diphenhydramine Hydrochloride Injection is a sterile, nonpyrogenic solution for intravenous or deep intramuscular use as an antihistaminic agent. Each mL contains diphenhydramine hydrochloride 50 mg and benzethonium chloride 100 mcg in Water for Injection. pH 4.0-6.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The chemical name of diphenhydramine hydrochloride is 2-(Diphenylmethoxy)-N,N-dimethylethylamine hydrochloride. The structural formula is as follows. C 17H 21NO HCl MW 291.82. Diphenhydramine hydrochloride occurs as a white crystalline powder and is freely soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>70385-2008-2</NDCCode>
<PackageDescription>2 AMPULE in 1 BAG (70385-2008-2) > 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>70385-2008-02</NDC11Code>
<ProductNDC>70385-2008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20050908</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine is used to relieve respiratory distress due to bronchospasm, to provide rapid relief of hypersensitivity reactions to drugs and other allergens, and to prolong the action of anesthetics. Its cardiac effects may be of use in restoring cardiac rhythm in cardiac arrest due to various causes, but it is not used in cardiac failure or in hemorrhagic, traumatic, or cardiogenic shock. Epinephrine is used as a hemostatic agent. It is also used in treating mucosal congestion of hay fever, rhinitis, and acute sinusitis; to relieve bronchial asthmatic paroxysms; in syncope due to complete heart block or carotid sinus hypersensitivity; for symptomatic relief of serum sickness, urticaria, angioneurotic edema; for resuscitation in cardiac arrest following anesthetic accidents; in simple (open angle) glaucoma; for relaxation of uterine musculature and to inhibit uterine contractions. Epinephrine Injection can be utilized to prolong the action of anesthetics used in local and regional anesthesia.</IndicationAndUsage>
<Description>Epinephrine Injection, USP 1:1000 is a sterile, nonpyrogenic solution. Each mL contains epinephrine 1 mg; sodium chloride 9 mg; sodium metabisulfite 0.9 mg added. May contain hydrochloric acid for pH adjustment. The solution contains no bacteriostat or antimicrobial agent. It is administered by the following routes: intravenous, intracardiac (left ventricular chamber), via endotracheal tube into the bronchial tree, subcutaneous or intramuscular. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4‑[1‑hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula. Sodium Chloride, USP is chemically designated NaCl, a white, crystalline compound freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>70385-2009-1</NDCCode>
<PackageDescription>1 CASE in 1 BAG (70385-2009-1) > 1 SYRINGE, GLASS in 1 CASE > .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>70385-2009-01</NDC11Code>
<ProductNDC>70385-2009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection, USP auto-injector is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injector is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection, USP auto-injector is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP auto-injector 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP auto-injector 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP auto-injector 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP auto-injector 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP auto-injector 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [ see Patient Counseling Information ( 17) ].</Description>
</NDC>
<NDC>
<NDCCode>70385-2013-1</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 BAG (70385-2013-1) > 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>70385-2013-01</NDC11Code>
<ProductNDC>70385-2013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naloxone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naloxone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070256</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC],Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naloxone Hydrochloride Injection is indicated for the complete or partial reversal of opioid depression, including respiratory depression, induced by natural and synthetic opioids including propoxyphene, methadone, and certain mixed agonist-antagonist analgesics: nalbuphine, pentazocine, butorphanol and cyclazocine. Naloxone hydrochloride is also indicated for the diagnosis of suspected or known acute opioid overdosage. Naloxone may be useful as an adjunctive agent to increase blood pressure in the management of septic shock (see CLINICAL PHARMACOLOGY, Adjunctive Use in Septic Shock).</IndicationAndUsage>
<Description>Naloxone Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of naloxone hydrochloride in water for injection. Each milliliter (mL) contains 0.4 mg naloxone hydrochloride and sodium chloride to adjust tonicity in water for injection. May contain hydrochloric acid for pH adjustment; pH 4.0 (3.0 to 6.5). The single-dose solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required, the unused portion should be discarded. The multiple-dose solution contains, in addition, 1.8 mg/mL methylparaben and 0.2 mg/mL propylparaben added as preservatives. Naloxone Hydrochloride Injection, USP may be administered intravenously, intramuscularly, or subcutaneously. Naloxone, an opioid antagonist, is a synthetic congener of oxymorphone. It differs from oxymorphone in that the methyl group on the nitrogen atom is replaced by an allyl group. Naloxone Hydrochloride, USP is chemically designated 17-Allyl-4,5α-epoxy-3,14-dihydroxymorphinan-6-one hydrochloride (C 19H 21NO 4 HCl), a white to slightly off-white powder soluble in water, in dilute acids, and in strong alkali; slightly soluble in alcohol; practically insoluble in ether and chloroform. It has a molecular weight of 363.84. It has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>70385-2014-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 BAG (70385-2014-1) > 25 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>70385-2014-01</NDC11Code>
<ProductNDC>70385-2014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrostat</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20000501</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021134</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitroglycerin is indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.</IndicationAndUsage>
<Description>NITROSTAT is a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg , or 0.6 mg nitroglycerin; as well as lactose monohydrate, NF; glyceryl monostearate, NF; pregelatinized starch, NF; calcium stearate, NF powder; and silicon dioxide, colloidal, NF. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is. Molecular weight: 227.09.</Description>
</NDC>
<NDC>
<NDCCode>70385-2016-1</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (70385-2016-1) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>70385-2016-01</NDC11Code>
<ProductNDC>70385-2016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solu-medrol</ProprietaryName>
<NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>19590402</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011856</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of SOLU-MEDROL Sterile Powder is indicated as follows:.</IndicationAndUsage>
<Description>SOLU-MEDROL Sterile Powder is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt. (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. SOLU-MEDROL is available in preservative and preservative-free formulations. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8 and the tonicities are, for the 40 mg per mL solution, 0.50 osmolar; for the 125 mg per 2 mL solution, 0.40 osmolar; for the 1 gram per 8 mL solution, 0.44 osmolar; for the 2 gram per 30.6 mL solutions, 0.42 osmolar. (Isotonic saline = 0.28 osmolar.).</Description>
</NDC>
<NDC>
<NDCCode>70385-2017-1</NDCCode>
<PackageDescription>1 CASE in 1 BAG (70385-2017-1) > 1 SYRINGE, GLASS in 1 CASE > .15 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>70385-2017-01</NDC11Code>
<ProductNDC>70385-2017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.15mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection, USP auto-injector is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injector is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection, USP auto-injector is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP auto-injector 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP auto-injector 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP auto-injector 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP auto-injector 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP auto-injector 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see Patient Counseling Information ( 17) ].</Description>
</NDC>
<NDC>
<NDCCode>70385-2018-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 BAG (70385-2018-1) > 25 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE</PackageDescription>
<NDC11Code>70385-2018-01</NDC11Code>
<ProductNDC>70385-2018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20160826</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021134</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitroglycerin is indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.</IndicationAndUsage>
<Description>Nitroglycerin tablets are stabilized sublingual compressed tablets that contain 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin; as well as lactose monohydrate, NF; glyceryl monostearate, NF; pregelatinized starch, NF; calcium stearate, NF powder; and silicon dioxide, colloidal, NF. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is. Molecular weight: 227.09.</Description>
</NDC>
<NDC>
<NDCCode>70385-2019-1</NDCCode>
<PackageDescription>1 CONTAINER in 1 PACKAGE (70385-2019-1) / 1 SYRINGE, GLASS in 1 CONTAINER / .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>70385-2019-01</NDC11Code>
<ProductNDC>70385-2019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine 0.3 Adults</ProprietaryName>
<NonProprietaryName>Epinephrine 0.3 Adults</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20161215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019430</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [ see Patient Counseling Information (17)].</Description>
</NDC>
<NDC>
<NDCCode>70385-2020-1</NDCCode>
<PackageDescription>1 CONTAINER in 1 PACKAGE (70385-2020-1) / 1 SYRINGE, GLASS in 1 CONTAINER / .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>70385-2020-01</NDC11Code>
<ProductNDC>70385-2020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine 0.15 Pediatrics</ProprietaryName>
<NonProprietaryName>Epinephrine 0.15 Pediatrics</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20161215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019430</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [ see Patient Counseling Information (17)].</Description>
</NDC>
<NDC>
<NDCCode>70385-2021-1</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BAG (70385-2021-1) > 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>70385-2021-01</NDC11Code>
<ProductNDC>70385-2021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flumazenil</ProprietaryName>
<NonProprietaryName>Flumazenil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20070101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078527</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>FLUMAZENIL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Flumazenil Injection, USP is indicated for the complete or partial reversal of the sedative effects of benzodiazepines in cases where general anesthesia has been induced and/or maintained with benzodiazepines, where sedation has been produced with benzodiazepines for diagnostic and therapeutic procedures, and for the management of benzodiazepine overdose.</IndicationAndUsage>
<Description>Flumazenil Injection, USP is a benzodiazepine receptor antagonist. Chemically, flumazenil is ethyl 8-fluoro-5,6-dihydro-5-methyl-6-oxo-4H-imidazo[1,5-a](1,4) benzodiazepine-3-carboxylate. Flumazenil has an imidazobenzodiazepine structure, a calculated molecular weight of 303.3, and the following structural formula. Flumazenil is a white to off-white crystalline compound with an octanol: buffer partition coefficient of 14 to 1 at pH 7.4. It is insoluble in water but slightly soluble in acidic aqueous solutions. Flumazenil injection is available as a sterile parenteral dosage form for intravenous administration. Each mL contains 0.1 mg of flumazenil compounded with 1.8 mg of methylparaben, 0.2 mg of propylparaben, 0.9% sodium chloride, 0.01% edetate disodium, and 0.01% acetic acid; the pH is adjusted to approximately 4 with hydrochloric acid and/or, if necessary, sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>70385-2022-1</NDCCode>
<PackageDescription>1 CASE in 1 PACKAGE (70385-2022-1) / 1 SYRINGE, GLASS in 1 CASE / .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>70385-2022-01</NDC11Code>
<ProductNDC>70385-2022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine 0.3 Adults</ProprietaryName>
<NonProprietaryName>Epinephrine 0.3 Adults</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP with patients and caregivers prior to use [see Patient Counseling Information ( 17) ].</Description>
</NDC>
<NDC>
<NDCCode>70385-2024-2</NDCCode>
<PackageDescription>2 VIAL in 1 PACKAGE (70385-2024-2) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>70385-2024-02</NDC11Code>
<ProductNDC>70385-2024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adrenalin Vials</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20130701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204200</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adrenalin ®is a non-selective alpha and beta adrenergic agonist indicated for: : 1 Emergency treatment of allergic reactions (Type 1), including anaphylaxis ( 1.1) , 2 To increase mean arterial blood pressure in adult patients with hypotension associated with septic shock ( 1.2) .</IndicationAndUsage>
<Description>Adrenalin (epinephrine injection, USP) is a clear, colorless, sterile solution containing 1 mg/mL epinephrine, packaged as 1 mL of solution in a single dose clear glass vial or 30 mL of solution in a multiple dose amber glass vial. In the 1 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 7.3 mg sodium chloride, 0.457 mg sodium metabisulfite, 1 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.32 mg of 4% hydrochloric acid to adjust pH, and water for injection. In the 30 mL vial, each 1 mL of Adrenalin solution contains 1 mg epinephrine, 6.15 mg sodium chloride, 0.457 mg sodium metabisulfite, 0.920 mg sodium hydroxide, 2.25 mg tartaric acid, 0.20 mg disodium edetate dihydrate, 5.18 mg of 4% hydrochloric acid to adjust pH, 5.25 mg chlorobutanol as a preservative and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. The chemical name of epinephrine is: 1,2-Benzenediol, 4-[(1R)-1-hydroxy-2-(methylamino)ethyl]-, or (-)-3,4-Dihydroxy-α-[2-(methylamino)ethyl]benzyl alcohol. The chemical structure of epinephrine is. The molecular weight of epinephrine is 183.2. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin.</Description>
</NDC>
<NDC>
<NDCCode>70385-2038-1</NDCCode>
<PackageDescription>1 CASE in 1 PACKAGE (70385-2038-1) / 1 SYRINGE, GLASS in 1 CASE / .15 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>70385-2038-01</NDC11Code>
<ProductNDC>70385-2038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine Pediatrics</ProprietaryName>
<NonProprietaryName>Epinephrine 0.15 Pediatrics</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Sina Health Inc</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.15mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP with patients and caregivers prior to use [see Patient Counseling Information ( 17) ].</Description>
</NDC>
<NDC>
<NDCCode>0254-2033-73</NDCCode>
<PackageDescription>3 CARTON in 1 CARTON (0254-2033-73) > 1 BLISTER PACK in 1 CARTON > 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00254-2033-73</NDC11Code>
<ProductNDC>0254-2033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Emoquette</ProprietaryName>
<NonProprietaryName>Desogestrel And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20190408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202789</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Emoquette® (desogestrel and ethinyl estradiol tablets) are indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table 1 lists the typical accidental pregnancy rates for users of combined oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and the Norplant System depends upon the reliability with which they are used. Correct and consistent use of these methods can result in lower failure rates. In a clinical trial with desogestrel and ethinyl estradiol tablets, 1,195 subjects completed 11,656 cycles and a total of 10 pregnancies were reported. This represents an overall user-efficacy (typical user-efficacy) pregnancy rate of 1.12 per 100 women-years. This rate includes patients who did not take the drug correctly. aAmong couples attempting to avoid pregnancy, the percentage who continue to use a method for one year. bAmong typical couples who initiate use of a method (not necessarily for the first time), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. cAmong couples who initiate use of a method (not necessarily for the first time) and who use it perfectly (both consistently and correctly), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. dThe treatment schedule is one dose within 72 hours after unprotected intercourse, and a second dose 12 hours after the first dose. The FDA has declared the following brands of oral contraceptives to be safe and effective for emergency contraception: Ovral® (1 dose is 2 white pills), Alesse® (1 dose is 5 pink pills), Nordette® or Levlen® (1 dose is 4 yellow pills). eHowever, to maintain effective protection against pregnancy, another method of contraception must be used as soon as menstruation resumes, the frequency of duration of breastfeeds is reduced, bottle feeds are introduced, or the baby reaches 6 months of age. fThe percents becoming pregnant in columns (2) and (3) are based on data from populations where contraception is not used and from women who cease using contraception in order to become pregnant. Among such populations, about 89% become pregnant within one year. This estimate was lowered slightly (to 85%) to represent the percent who would become pregnant within one year among women now relying on reversible methods of contraception if they abandoned contraception altogether. gFoams, creams, gels, vaginal suppositories, and vaginal film. hCervical mucus (ovulation) method supplemented by calendar in the pre-ovulatory and basal body temperature in the post-ovulatory phases. iWith spermicidal cream or jelly. jWithout spermicides. Desogestrel and ethinyl estradiol tablets have not been studied for and are not indicated for use in emergency contraception.</IndicationAndUsage>
<Description>Emoquette® (desogestrel and ethinyl estradiol tablets, USP) provide an oral contraceptive regimen of 21 orange round tablets each containing 0.15 mg desogestrel (13-ethyl-11-methylene-18,19-dinor-17 alpha-pregn-4-en- 20-yn-17-ol) and 0.03 mg ethinyl estradiol (19-nor-17 alpha-pregna-1,3,5 (10)-trien-20-yne-3,17,diol). Inactive ingredients include alpha-tocopherol, colloidal silicon dioxide, corn starch, FD&C yellow 5 aluminum lake, FD&C yellow 6 aluminum lake, hypromellose 2910, lactose monohydrate, polysorbate, povidone, red iron oxide, stearic acid, titanium dioxide and triacetin. Each green tablet contains the following inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue 2 aluminum lake, hypromellose 2910, lactose monohydrate, magnesium stearate, polysorbate, povidone, titanium dioxide, triacetin, and yellow iron oxide. USP Dissolution Test 2 used.</Description>
</NDC>
<NDC>
<NDCCode>0254-2033-80</NDCCode>
<PackageDescription>6 CARTON in 1 CARTON (0254-2033-80) > 1 BLISTER PACK in 1 CARTON > 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00254-2033-80</NDC11Code>
<ProductNDC>0254-2033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Emoquette</ProprietaryName>
<NonProprietaryName>Desogestrel And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20190408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202789</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Emoquette® (desogestrel and ethinyl estradiol tablets) are indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. Oral contraceptives are highly effective. Table 1 lists the typical accidental pregnancy rates for users of combined oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and the Norplant System depends upon the reliability with which they are used. Correct and consistent use of these methods can result in lower failure rates. In a clinical trial with desogestrel and ethinyl estradiol tablets, 1,195 subjects completed 11,656 cycles and a total of 10 pregnancies were reported. This represents an overall user-efficacy (typical user-efficacy) pregnancy rate of 1.12 per 100 women-years. This rate includes patients who did not take the drug correctly. aAmong couples attempting to avoid pregnancy, the percentage who continue to use a method for one year. bAmong typical couples who initiate use of a method (not necessarily for the first time), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. cAmong couples who initiate use of a method (not necessarily for the first time) and who use it perfectly (both consistently and correctly), the percentage who experience an accidental pregnancy during the first year if they do not stop use for any other reason. dThe treatment schedule is one dose within 72 hours after unprotected intercourse, and a second dose 12 hours after the first dose. The FDA has declared the following brands of oral contraceptives to be safe and effective for emergency contraception: Ovral® (1 dose is 2 white pills), Alesse® (1 dose is 5 pink pills), Nordette® or Levlen® (1 dose is 4 yellow pills). eHowever, to maintain effective protection against pregnancy, another method of contraception must be used as soon as menstruation resumes, the frequency of duration of breastfeeds is reduced, bottle feeds are introduced, or the baby reaches 6 months of age. fThe percents becoming pregnant in columns (2) and (3) are based on data from populations where contraception is not used and from women who cease using contraception in order to become pregnant. Among such populations, about 89% become pregnant within one year. This estimate was lowered slightly (to 85%) to represent the percent who would become pregnant within one year among women now relying on reversible methods of contraception if they abandoned contraception altogether. gFoams, creams, gels, vaginal suppositories, and vaginal film. hCervical mucus (ovulation) method supplemented by calendar in the pre-ovulatory and basal body temperature in the post-ovulatory phases. iWith spermicidal cream or jelly. jWithout spermicides. Desogestrel and ethinyl estradiol tablets have not been studied for and are not indicated for use in emergency contraception.</IndicationAndUsage>
<Description>Emoquette® (desogestrel and ethinyl estradiol tablets, USP) provide an oral contraceptive regimen of 21 orange round tablets each containing 0.15 mg desogestrel (13-ethyl-11-methylene-18,19-dinor-17 alpha-pregn-4-en- 20-yn-17-ol) and 0.03 mg ethinyl estradiol (19-nor-17 alpha-pregna-1,3,5 (10)-trien-20-yne-3,17,diol). Inactive ingredients include alpha-tocopherol, colloidal silicon dioxide, corn starch, FD&C yellow 5 aluminum lake, FD&C yellow 6 aluminum lake, hypromellose 2910, lactose monohydrate, polysorbate, povidone, red iron oxide, stearic acid, titanium dioxide and triacetin. Each green tablet contains the following inactive ingredients: corn starch, colloidal silicon dioxide, FD&C blue 2 aluminum lake, hypromellose 2910, lactose monohydrate, magnesium stearate, polysorbate, povidone, titanium dioxide, triacetin, and yellow iron oxide. USP Dissolution Test 2 used.</Description>
</NDC>
<NDC>
<NDCCode>0703-2033-03</NDCCode>
<PackageDescription>10 CARTON in 1 BOX (0703-2033-03) / 1 VIAL, SINGLE-DOSE in 1 CARTON / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00703-2033-03</NDC11Code>
<ProductNDC>0703-2033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180904</StartMarketingDate>
<EndMarketingDate>20250131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204960</ApplicationNumber>
<LabelerName>Teva Parenteral Medicines, Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180904</StartMarketingDatePackage>
<EndMarketingDatePackage>20250131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium Besylate Injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
<Description>Cisatracurium Besylate Injection, USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium Besylate Injection, USP contains cisatracurium besylate as the active pharmaceutical ingredient. Cisatracurium besylate is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate is [1R- [1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4- dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium Besylate Injection, USP is a sterile, non-pyrogenic aqueous solution. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. Each mL in the multiple-dose vials contains 2 mg of cisatracurium (equivalent to 2.68 mg of cisatracurium besylate), benzenesulfonic acid as pH adjuster, and also contains 9 mg of benzyl alcohol as preservative, in water for injection. The pH of Cisatracurium Besylate Injection, USP is between 3.0 and 3.8.</Description>
</NDC>
<NDC>
<NDCCode>14222-2033-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (14222-2033-1) / 50 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>14222-2033-01</NDC11Code>
<ProductNDC>14222-2033</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Radiant Defense Perfecting Liquid Broad Spectrum Spf 30 - Sand</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200310</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Rodan & Fields</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>3.44; 4</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions]. decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>17630-2033-1</NDCCode>
<PackageDescription>177 mL in 1 CAN (17630-2033-1)</PackageDescription>
<NDC11Code>17630-2033-01</NDC11Code>
<ProductNDC>17630-2033</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Banana Boat Ultra Defense Sheer Protect Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone And Octocrylene And Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090915</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Accra-Pac, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>.03; .1; .05</StrengthNumber>
<StrengthUnit>mL/mL; mL/mL; mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>helps prevent sunburn.</IndicationAndUsage>
<Description>Sunscreen.</Description>
</NDC>
<NDC>
<NDCCode>17630-2033-2</NDCCode>
<PackageDescription>236 mL in 1 CAN (17630-2033-2)</PackageDescription>
<NDC11Code>17630-2033-02</NDC11Code>
<ProductNDC>17630-2033</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Banana Boat Ultra Defense Sheer Protect Spf 50</ProprietaryName>
<NonProprietaryName>Avobenzone And Octocrylene And Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090915</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Accra-Pac, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>.03; .1; .05</StrengthNumber>
<StrengthUnit>mL/mL; mL/mL; mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>helps prevent sunburn.</IndicationAndUsage>
<Description>Sunscreen.</Description>
</NDC>
<NDC>
<NDCCode>37662-2033-1</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-2033-1) </PackageDescription>
<NDC11Code>37662-2033-01</NDC11Code>
<ProductNDC>37662-2033</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Petroleum</ProprietaryName>
<NonProprietaryName>Petroleum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221129</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>KEROSENE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_Q]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43742-2033-1</NDCCode>
<PackageDescription>960 mL in 1 BOTTLE, PLASTIC (43742-2033-1) </PackageDescription>
<NDC11Code>43742-2033-01</NDC11Code>
<ProductNDC>43742-2033</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Echinacea (angustifolia), Hydrastis Canadensis, Nasturtium Aquaticum, Thuja Occidentalis, Thymus (suis), Eupatorium Perfoliatum, Gelsemium Sempervirens, Iodium, Lachesis Mutus, Lycopodium Clavatum, Nux Vomica, Phosphoricum Acidum, Phosphorus, Selenium Metallicum, Zincum Metallicum, Herpes Simplex I And Ii Nosode, Herpes Zoster Nosode, Poliomyelitis Nosode, Epstein Barr Virus Nosode, Cytomegalovirus Nosode, Morbillinum, Parotidinum, Rubella Nosode, Pyrogenium, Hepatitis B Nosode, Coxsackie B1 Nosode,</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20201008</StartMarketingDate>
<EndMarketingDate>20260201</EndMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>ANTIMONY TRISULFIDE; ECHINACEA ANGUSTIFOLIA; EUPATORIUM PERFOLIATUM FLOWERING TOP; GELSEMIUM SEMPERVIRENS ROOT; GOLDENSEAL; HEPATITIS B VIRUS; HUMAN COXSACKIEVIRUS B1; HUMAN COXSACKIEVIRUS B4; HUMAN HERPESVIRUS 1; HUMAN HERPESVIRUS 2; HUMAN HERPESVIRUS 3; HUMAN HERPESVIRUS 4; HUMAN HERPESVIRUS 5; IODINE; LACHESIS MUTA VENOM; LEDUM PALUSTRE TWIG; LYCOPODIUM CLAVATUM SPORE; MEASLES VIRUS; MUMPS VIRUS; NASTURTIUM OFFICINALE; PHOSPHORIC ACID; PHOSPHORUS; POLIOVIRUS; RANCID BEEF; RUBELLA VIRUS; SELENIUM; STRYCHNOS NUX-VOMICA SEED; SUS SCROFA THYMUS; THIMEROSAL; THUJA OCCIDENTALIS LEAFY TWIG; ZINC</SubstanceName>
<StrengthNumber>30; 6; 12; 12; 6; 33; 11; 18; 15; 15; 15; 18; 20; 12; 12; 30; 12; 30; 30; 6; 12; 12; 15; 30; 30; 12; 12; 8; 30; 6; 12</StrengthNumber>
<StrengthUnit>[hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>08-OCT-20</StartMarketingDatePackage>
<EndMarketingDatePackage>01-FEB-26</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>48951-2033-1</NDCCode>
<PackageDescription>10 AMPULE in 1 BOX (48951-2033-1) > 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>48951-2033-01</NDC11Code>
<ProductNDC>48951-2033</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Belladonna Ex Herba 6</ProprietaryName>
<NonProprietaryName>Belladonna Ex Herba 6</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Uriel Pharmacy Inc.</LabelerName>
<SubstanceName>ATROPA BELLADONNA</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions: FOR ORAL USE.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>49817-2033-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (49817-2033-1) > 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>49817-2033-01</NDC11Code>
<ProductNDC>49817-2033</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Plessentiel Natural Glow Foundation 16h Wear With Sunscreen Broad Spectrum Spf 20</ProprietaryName>
<ProprietaryNameSuffix>00n Porcelaine/porcelain</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190309</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Guerlain</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>17.6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190309</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49817-2033-3</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (49817-2033-3) > 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>49817-2033-03</NDC11Code>
<ProductNDC>49817-2033</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Plessentiel Natural Glow Foundation 16h Wear With Sunscreen Broad Spectrum Spf 20</ProprietaryName>
<ProprietaryNameSuffix>00n Porcelaine/porcelain</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190309</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Guerlain</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>17.6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190309</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>