RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70436-206-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-206-80)  / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0206-80</NDC11Code>
    <ProductNDC>70436-206</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Nitroprusside In 0.9% Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Nitroprusside In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221231</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215846</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221231</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium nitroprusside is a direct acting vasodilator indicated for: 1 Immediate reduction of blood pressure ( 1.1) , 2 Producing controlled hypotension to reduce bleeding during surgery ( 1.2) , 3 Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure ( 1.3) .</IndicationAndUsage>
    <Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate (2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has a molecular formula Na 2[Fe(CN) 5NO]  2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration (2.1)]. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>42003-206-01</NDCCode>
    <PackageDescription>80 CLOTH in 1 BAG (42003-206-01) </PackageDescription>
    <NDC11Code>42003-0206-01</NDC11Code>
    <ProductNDC>42003-206</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Alcohol Wipes</ProprietaryName>
    <NonProprietaryName>Sanitizing Wipes</NonProprietaryName>
    <DosageFormName>CLOTH</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200330</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Zhejiang Jiayan Daily Commodity Co., Ltd</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mL/1001</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2023-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200905</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Decreases bacteria on the skin.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70436-014-80</NDCCode>
    <PackageDescription>5 VIAL, SINGLE-DOSE in 1 BOX (70436-014-80)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0014-80</NDC11Code>
    <ProductNDC>70436-014</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20210901</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207076</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-09-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70436-025-80</NDCCode>
    <PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION in 1 VIAL, SINGLE-DOSE (70436-025-80) </PackageDescription>
    <NDC11Code>70436-0025-80</NDC11Code>
    <ProductNDC>70436-025</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bivalirudin</ProprietaryName>
    <NonProprietaryName>Bivalirudin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213078</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>BIVALIRUDIN</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bivalirudin for injection is indicated for use as an anticoagulant for use in patients undergoing percutaneous coronary intervention (PCI) including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.</IndicationAndUsage>
    <Description>Bivalirudin for injection contains bivalirudin which is a specific and reversible direct thrombin inhibitor. Bivalirudin is a synthetic, 20 amino acid peptide, with the chemical name of D-phenylalanyl-L‑prolyl-L-arginyl-L-prolyl-glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L‑phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L‑leucine. The active pharmaceutical ingredient is in the form of bivalirudin trifluoroacetate as a white to off-white powder. The chemical name for bivalirudin trifluoroacetate is D-phenylalanyl-L-prolyl-L-arginyl-L-prolyl- glycyl-glycyl-glycyl-glycyl-L-asparagyl-glycyl-L-aspartyl-L‑phenylalanyl-L-glutamyl-L-glutamyl-L-isoleucyl-L-prolyl-L-glutamyl-L-glutamyl-L-tyrosyl-L‑leucine trifluoroacetate ( Figure 1). The molecular weight of bivalirudin is 2180 daltons (anhydrous free base peptide). Figure 1. Structure formula for bivalirudin trifluoroacetate. Bivalirudin for injection is supplied as a sterile white lyophilized cake, in single-dose vials. Each vial contains 250 mg bivalirudin, equivalent to an average of 275 mg of bivalirudin trifluoroactetate*, 125 mg mannitol, and sodium hydroxide to adjust the pH to 5-6 (equivalent of approximately 12.5 mg sodium). When reconstituted with Sterile Water for Injection, the product yields a clear to opalescent, colorless to slightly yellow solution, pH 5-6. *The range of bivalirudin trifluoroacetate is 270 mg to 280 mg based on a range of trifluoroacetic acid composition of 1.7 to 2.6 equivalents.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-026-80</NDCCode>
    <PackageDescription>10 mL in 1 VIAL (70436-026-80) </PackageDescription>
    <NDC11Code>70436-0026-80</NDC11Code>
    <ProductNDC>70436-026</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eptifibatide</ProprietaryName>
    <NonProprietaryName>Eptifibatide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190722</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209864</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>EPTIFIBATIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190722</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .</IndicationAndUsage>
    <Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2and a molecular weight of 831.96. Each 10 mL vial contains 2 mg/mL of eptifibatide injection and each 100 mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-027-80</NDCCode>
    <PackageDescription>100 mL in 1 VIAL (70436-027-80) </PackageDescription>
    <NDC11Code>70436-0027-80</NDC11Code>
    <ProductNDC>70436-027</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eptifibatide</ProprietaryName>
    <NonProprietaryName>Eptifibatide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190722</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209864</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>EPTIFIBATIDE</SubstanceName>
    <StrengthNumber>.75</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190722</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI) ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .</IndicationAndUsage>
    <Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2and a molecular weight of 831.96. Each 10 mL vial contains 2 mg/mL of eptifibatide injection and each 100 mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-028-80</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70436-028-80)  &gt; 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70436-0028-80</NDC11Code>
    <ProductNDC>70436-028</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Nitroprusside</ProprietaryName>
    <NonProprietaryName>Sodium Nitroprusside</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201015</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214199</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201015</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium nitroprusside is indicated for the immediate reduction of blood pressure of adult and pediatric patients in hypertensive crises. Concomitant longer-acting antihypertensive medication should be administered so that the duration of treatment with sodium nitroprusside can be minimized. Sodium nitroprusside is also indicated for producing controlled hypotension in order to reduce bleeding during surgery. Sodium nitroprusside is also indicated for the treatment of acute congestive heart failure.</IndicationAndUsage>
    <Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate(2-) dihydrate, a hypotensive agent whose structural formula is. whose molecular formula is Na 2[Fe(CN) 5NO]  2H 2O, and whose molecular weight is 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. In an aqueous solution infused intravenously, sodium nitroprusside is a rapid-acting vasodilator, active on both arteries and veins. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes. (See DOSAGE AND ADMINISTRATION section.) The solution is also sensitive to certain wavelengths of light, and it must be protected from light in clinical use. Sodium Nitroprusside Injection is available as. 50 mg Single Dose Vial – Each 2 mL vial contains the equivalent of 50 mg sodium nitroprusside dihydrate in sterile water for injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-029-80</NDCCode>
    <PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 BOX (70436-029-80) </PackageDescription>
    <NDC11Code>70436-0029-80</NDC11Code>
    <ProductNDC>70436-029</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Voriconazole</ProprietaryName>
    <NonProprietaryName>Voriconazole</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190128</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211661</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals</LabelerName>
    <SubstanceName>VORICONAZOLE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Voriconazole for injection is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with: 1 Invasive aspergillosis ( 1.1) , 2 Candidemia in non-neutropenics and other deep tissue Candidainfections ( 1.2) , 3 Esophageal candidiasis ( 1.3) , 4 Serious fungal infections caused by Scedosporium apiospermumand Fusariumspecies including Fusarium solani, in patients intolerant of, or refractory to, other therapy ( 1.4) .</IndicationAndUsage>
    <Description>Voriconazole, an azole antifungal agent is available as a lyophilized powder for solution for intravenous infusion, film-coated tablets for oral administration, and as a powder for oral suspension. The structural formula is. Voriconazole is designated chemically as (2R,3S)-2-(2,4-difluorophenyl)-3-(5-fluoro-4-pyrimidinyl)-1-(1 H-1,2,4-triazol-1-yl)-2-butanol with an empirical formula of C 16H 14F 3N 5O and a molecular weight of 349.3. Voriconazole drug substance is a white to light-colored powder. Voriconazole for injection is a white lyophilized powder containing nominally 200 mg voriconazole and 3,200 mg sulfobutyl ether beta-cyclodextrin sodium in a 30 mL Type I clear glass vial. Voriconazole for injection is intended for administration by intravenous infusion. It is a single-dose, unpreserved product. Vials containing 200 mg lyophilized voriconazole are intended for reconstitution with Water for Injection to produce a solution containing 10 mg/mL voriconazole and 160 mg/mL of sulfobutyl ether beta-cyclodextrin sodium. The resultant solution is further diluted prior to administration as an intravenous infusion [see Dosage and Administration(2)] .</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-033-80</NDCCode>
    <PackageDescription>20 mL in 1 VIAL, SINGLE-DOSE (70436-033-80) </PackageDescription>
    <NDC11Code>70436-0033-80</NDC11Code>
    <ProductNDC>70436-033</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Daptomycin</ProprietaryName>
    <NonProprietaryName>Daptomycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215890</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>DAPTOMYCIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/20mL</StrengthUnit>
    <Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Daptomycin for injection is a lipopeptide antibacterial indicated for the treatment of: 1 Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) ( 1.1) and, , 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis. ( 1.2) , 3 Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (  1.3)  .</IndicationAndUsage>
    <Description>Daptomycin for injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D‑asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl- threo-3‑methyl-L-glutamyl-3-anthraniloyl-L-alanine ε 1-lactone. The chemical structure is:. The empirical formula is C 72H 101N 17O 26; the molecular weight is 1620.67. Daptomycin for injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown, lyophilized cake containing approximately 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration ( 2.7)] . The only inactive ingredient is sodium hydroxide, which is used for pH adjustment. Freshly reconstituted solutions of daptomycin for injection range in color from pale yellow to light brown.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-035-80</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70436-035-80)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70436-0035-80</NDC11Code>
    <ProductNDC>70436-035</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lincomycin</ProprietaryName>
    <NonProprietaryName>Lincomycin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20230223</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216662</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>LINCOMYCIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-03-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70436-105-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-105-80)  / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0105-80</NDC11Code>
    <ProductNDC>70436-105</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclophosphamide</ProprietaryName>
    <NonProprietaryName>Cyclophosphamide For Injection</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250326</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218632</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/25mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with:  Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1)  Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).</IndicationAndUsage>
    <Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials.  500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol.  1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol.  2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-106-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-106-80)  / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0106-80</NDC11Code>
    <ProductNDC>70436-106</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclophosphamide</ProprietaryName>
    <NonProprietaryName>Cyclophosphamide For Injection</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250326</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218632</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with:  Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1)  Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).</IndicationAndUsage>
    <Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials.  500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol.  1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol.  2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-107-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-107-80)  / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0107-80</NDC11Code>
    <ProductNDC>70436-107</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclophosphamide</ProprietaryName>
    <NonProprietaryName>Cyclophosphamide For Injection</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250326</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218632</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with:  Malignant Diseases:malignant lymphomas: Hodgkin’s disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt’s lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma ( 1.1)  Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy ( 1.2) Limitations of Use: The safety and effectiveness for the treatment of nephrotic syndrome in adults or other renal disease has not been established. ( 1.2).</IndicationAndUsage>
    <Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2PH 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white cake available as 500 mg, 1 g, and 2 g strength single-dose vials.  500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide and 375 mg mannitol.  1 g vial contains 1069 mg cyclophosphamide monohydrate equivalent to 1 g cyclophosphamide and 750 mg mannitol.  2 g vial contains 2138 mg cyclophosphamide monohydrate equivalent to 2 g cyclophosphamide and 1500 mg mannitol.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-110-80</NDCCode>
    <PackageDescription>30 mL in 1 CARTON (70436-110-80) </PackageDescription>
    <NDC11Code>70436-0110-80</NDC11Code>
    <ProductNDC>70436-110</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tobramycin</ProprietaryName>
    <NonProprietaryName>Tobramycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217029</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>TOBRAMYCIN</SubstanceName>
    <StrengthNumber>1200</StrengthNumber>
    <StrengthUnit>mg/30mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiellasp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiellasp, Enterobactersp, Serratiasp, E. coli, and S. aureus(penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiellasp, and Enterobactersp. Skin, bone, and skin structure infections caused by P. aeruginosa, Proteussp, E. coli, Klebsiellasp, Enterobactersp, and S. aureus. Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteussp (indole-positive and indole-negative), E. coli, Klebsiellasp, Enterobactersp, Serratiasp, S. aureus, Providenciasp, and Citrobactersp. Aminoglycosides, including tobramycin sulfate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram-negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulfate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGSbox above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is a white or off-white lyophilized porous cake for parenteral administration. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin; After reconstitution, each mL contains 40 mg of tobramycin, contains sulfuric acid and may contain sodium hydroxide for pH adjustment. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O-[2,6-diamino-2,3,6-trideoxy-α-D- ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, (2:5)(salt) and has the chemical formula (C 18H 37N 5O 9) 25H 2SO 4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION: Directions for proper use of Pharmacy Bulk Package).</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-116-82</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (70436-116-82)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70436-116-80) </PackageDescription>
    <NDC11Code>70436-0116-82</NDC11Code>
    <ProductNDC>70436-116</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20230710</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217021</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230710</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Leucovorin calcium rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin calcium is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists. Leucovorin calcium is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.</IndicationAndUsage>
    <Description>Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[ p-[[[(6 RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is:. C 20H 21CaN 7O 7M.W.=511.5. Leucovorin Calcium for Injection, USP is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 50 mg, 100 mg, 200 mg, 350 mg, and 500 mg vials. Each 50 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 5 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. Each 500 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 50 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. In each dosage form, one milligram of leucovorin calcium contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride, USP, added to adjust tonicity. The inactive ingredient is sodium chloride 40 mg/vial for the 50 mg vial, 80 mg/vial for the 100 mg vial, 80 mg/vial for the 200 mg vial, 140 mg/vial for the 350 mg vial, and 450 mg/vial for the 500 mg vial. Sodium hydroxide and/or hydrochloric acid are used to adjust the pH to approximately 8.1 during manufacture. Reconstitute with Bacteriostatic Water for Injection, USP, which contains benzyl alcohol (see WARNINGSsection), or with Sterile Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-117-80</NDCCode>
    <PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70436-117-80) </PackageDescription>
    <NDC11Code>70436-0117-80</NDC11Code>
    <ProductNDC>70436-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20230710</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217021</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230710</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Leucovorin calcium rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin calcium is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists. Leucovorin calcium is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.</IndicationAndUsage>
    <Description>Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[ p-[[[(6 RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is:. C 20H 21CaN 7O 7M.W.=511.5. Leucovorin Calcium for Injection, USP is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 50 mg, 100 mg, 200 mg, 350 mg, and 500 mg vials. Each 50 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 5 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. Each 500 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 50 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. In each dosage form, one milligram of leucovorin calcium contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride, USP, added to adjust tonicity. The inactive ingredient is sodium chloride 40 mg/vial for the 50 mg vial, 80 mg/vial for the 100 mg vial, 80 mg/vial for the 200 mg vial, 140 mg/vial for the 350 mg vial, and 450 mg/vial for the 500 mg vial. Sodium hydroxide and/or hydrochloric acid are used to adjust the pH to approximately 8.1 during manufacture. Reconstitute with Bacteriostatic Water for Injection, USP, which contains benzyl alcohol (see WARNINGSsection), or with Sterile Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-118-80</NDCCode>
    <PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70436-118-80) </PackageDescription>
    <NDC11Code>70436-0118-80</NDC11Code>
    <ProductNDC>70436-118</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20230710</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217021</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230710</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Leucovorin calcium rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin calcium is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists. Leucovorin calcium is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.</IndicationAndUsage>
    <Description>Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[ p-[[[(6 RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is:. C 20H 21CaN 7O 7M.W.=511.5. Leucovorin Calcium for Injection, USP is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 50 mg, 100 mg, 200 mg, 350 mg, and 500 mg vials. Each 50 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 5 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. Each 500 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 50 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. In each dosage form, one milligram of leucovorin calcium contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride, USP, added to adjust tonicity. The inactive ingredient is sodium chloride 40 mg/vial for the 50 mg vial, 80 mg/vial for the 100 mg vial, 80 mg/vial for the 200 mg vial, 140 mg/vial for the 350 mg vial, and 450 mg/vial for the 500 mg vial. Sodium hydroxide and/or hydrochloric acid are used to adjust the pH to approximately 8.1 during manufacture. Reconstitute with Bacteriostatic Water for Injection, USP, which contains benzyl alcohol (see WARNINGSsection), or with Sterile Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-119-80</NDCCode>
    <PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70436-119-80) </PackageDescription>
    <NDC11Code>70436-0119-80</NDC11Code>
    <ProductNDC>70436-119</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20241227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217021</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>350</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Leucovorin calcium rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin calcium is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists. Leucovorin calcium is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.</IndicationAndUsage>
    <Description>Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[ p-[[[(6 RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is:. C 20H 21CaN 7O 7M.W.=511.5. Leucovorin Calcium for Injection, USP is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 50 mg, 100 mg, 200 mg, 350 mg, and 500 mg vials. Each 50 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 5 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. Each 500 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 50 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. In each dosage form, one milligram of leucovorin calcium contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride, USP, added to adjust tonicity. The inactive ingredient is sodium chloride 40 mg/vial for the 50 mg vial, 80 mg/vial for the 100 mg vial, 80 mg/vial for the 200 mg vial, 140 mg/vial for the 350 mg vial, and 450 mg/vial for the 500 mg vial. Sodium hydroxide and/or hydrochloric acid are used to adjust the pH to approximately 8.1 during manufacture. Reconstitute with Bacteriostatic Water for Injection, USP, which contains benzyl alcohol (see WARNINGSsection), or with Sterile Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-120-80</NDCCode>
    <PackageDescription>500 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70436-120-80) </PackageDescription>
    <NDC11Code>70436-0120-80</NDC11Code>
    <ProductNDC>70436-120</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20230710</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217021</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230710</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Leucovorin calcium rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin calcium is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent overdosages of folic acid antagonists. Leucovorin calcium is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.</IndicationAndUsage>
    <Description>Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[ p-[[[(6 RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is:. C 20H 21CaN 7O 7M.W.=511.5. Leucovorin Calcium for Injection, USP is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 50 mg, 100 mg, 200 mg, 350 mg, and 500 mg vials. Each 50 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 5 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. Each 500 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 50 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. In each dosage form, one milligram of leucovorin calcium contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride, USP, added to adjust tonicity. The inactive ingredient is sodium chloride 40 mg/vial for the 50 mg vial, 80 mg/vial for the 100 mg vial, 80 mg/vial for the 200 mg vial, 140 mg/vial for the 350 mg vial, and 450 mg/vial for the 500 mg vial. Sodium hydroxide and/or hydrochloric acid are used to adjust the pH to approximately 8.1 during manufacture. Reconstitute with Bacteriostatic Water for Injection, USP, which contains benzyl alcohol (see WARNINGSsection), or with Sterile Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-122-80</NDCCode>
    <PackageDescription>15 mL in 1 CARTON (70436-122-80) </PackageDescription>
    <NDC11Code>70436-0122-80</NDC11Code>
    <ProductNDC>70436-122</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gadobutrol</ProprietaryName>
    <NonProprietaryName>Gadobutrol</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217480</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>GADOBUTROL</SubstanceName>
    <StrengthNumber>604.72</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-09-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70436-123-80</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70436-123-80)  / 100 mL in 1 VIAL (70436-123-40) </PackageDescription>
    <NDC11Code>70436-0123-80</NDC11Code>
    <ProductNDC>70436-123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gadoterate Meglumine</ProprietaryName>
    <NonProprietaryName>Gadoterate Meglumine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240628</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218073</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>GADOTERATE MEGLUMINE</SubstanceName>
    <StrengthNumber>376.9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Gadolinium-based Contrast Agent [EPC], Magnetic Resonance Contrast Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240628</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gadoterate Meglumine Injection is a gadolinium-based contrast agent indicated for intravenous use with magnetic resonance imaging (MRI) in brain (intracranial), spine and associated tissues in adult and pediatric patients (including term neonates) to detect and visualize areas with disruption of the blood brain barrier (BBB) and/or abnormal vascularity.</IndicationAndUsage>
    <Description>Gadoterate Meglumine Injection, USP is a paramagnetic macrocyclic ionic contrast agent administered for magnetic resonance imaging. The chemical name for gadoterate meglumine is D-glucitol, 1-deoxy-1-(methylamino)-,[1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraaceto(4-)-.kappa.N1, .kappa.N4, .kappa.N7, .kappa.N10, .kappa.O1, .kappa.O4, .kappa.O7, .kappa.O10]gadolinate(1-)(1:1); it has a formula weight of 753.9 g/mol and empirical formula of C 23H 42O 13N 5Gd (anhydrous basis). The structural formula of gadoterate meglumine in solution is as follows. CAS Registry No. 92943-93-6. Gadoterate Meglumine Injection, USP is a sterile, nonpyrogenic, clear, colorless to yellow, aqueous solution of 0.5 mmol/mL of gadoterate meglumine, for intravenous use. No preservative is added. Each mL of Gadoterate Meglumine Injection, USP contains 376.9 mg of gadoterate meglumine, 0.25 mg of DOTA and water for injection. Gadoterate Meglumine Injection, USP has a pH of 6.5 to 8.0. The main physiochemical properties of Gadoterate Meglumine Injection, USP are provided below. The thermodynamic stability constants for gadoterate (log K thermand log K condat pH 7.4) are 25.6 and 19.3, respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-147-80</NDCCode>
    <PackageDescription>2 mL in 1 VIAL (70436-147-80) </PackageDescription>
    <NDC11Code>70436-0147-80</NDC11Code>
    <ProductNDC>70436-147</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20210923</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207076</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.</IndicationAndUsage>
    <Description>Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage form: 1 Dicyclomine Hydrochloride Injection, USP is a sterile, pyrogen-free, aqueous solution for intramuscular injection (NOT FOR INTRAVENOUS USE) supplied as a vial containing 20 mg/2 mL (10 mg/mL). Each mL contains 10 mg dicyclomine hydrochloride USP in sterile water for injection, made isotonic with sodium chloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-162-80</NDCCode>
    <PackageDescription>10 mL in 1 VIAL (70436-162-80) </PackageDescription>
    <NDC11Code>70436-0162-80</NDC11Code>
    <ProductNDC>70436-162</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eptifibatide</ProprietaryName>
    <NonProprietaryName>Eptifibatide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209864</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>EPTIFIBATIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI). ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .</IndicationAndUsage>
    <Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2and a molecular weight of 831.96. Each 10 mL vial contains 2 mg/mL of eptifibatide injection and each 100 mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-163-80</NDCCode>
    <PackageDescription>100 mL in 1 VIAL (70436-163-80) </PackageDescription>
    <NDC11Code>70436-0163-80</NDC11Code>
    <ProductNDC>70436-163</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eptifibatide</ProprietaryName>
    <NonProprietaryName>Eptifibatide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209864</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>EPTIFIBATIDE</SubstanceName>
    <StrengthNumber>.75</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Platelet Aggregation [PE], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Eptifibatide injection is a platelet aggregation inhibitor indicated for: 1 Treatment of acute coronary syndrome (ACS) managed medically or with percutaneous coronary intervention (PCI). ( 1.1) , 2 Treatment of patients undergoing PCI (including intracoronary stenting) ( 1.2) .</IndicationAndUsage>
    <Description>Eptifibatide is a cyclic heptapeptide containing 6 amino acids and 1 mercaptopropionyl (des-amino cysteinyl) residue. An interchain disulfide bridge is formed between the cysteine amide and the mercaptopropionyl moieties. Chemically it is N 6-(aminoiminomethyl)-N 2-(3-mercapto-1-oxopropyl)-L-lysylglycyl-L-α-aspartyl-L-tryptophyl-L-prolyl-L-cysteinamide, cyclic (1→6)-disulfide. Eptifibatide binds to the platelet receptor glycoprotein (GP) IIb/IIIa of human platelets and inhibits platelet aggregation. The eptifibatide peptide is produced by solution-phase peptide synthesis, and is purified by preparative reverse-phase liquid chromatography and lyophilized. The structural formula is. Eptifibatide Injection is a clear, colorless, sterile, non-pyrogenic solution for intravenous (IV) use with an empirical formula of C 35H 49N 11O 9S 2and a molecular weight of 831.96. Each 10 mL vial contains 2 mg/mL of eptifibatide injection and each 100 mL vial contains 0.75 mg/mL of eptifibatide injection. Each vial of either size also contains 5.25 mg/mL citric acid and sodium hydroxide to adjust the pH to 5.35.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-190-82</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70436-190-82)  / 5 mL in 1 VIAL (70436-190-80) </PackageDescription>
    <NDC11Code>70436-0190-82</NDC11Code>
    <ProductNDC>70436-190</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Sodium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220225</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215732</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>ESOMEPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220225</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole sodium for injection is a proton pump inhibitor (PPI) indicated for the: 1 Short-term treatment of Gastroesophageal Reflux Disease (GERD) with erosive esophagitis (EE) in adults and pediatric patients 1 month to 17 years of age, as an alternative to oral therapy when oral esomeprazole is not possible or appropriate. (1.1), 2 Risk reduction of rebleeding of gastric or duodenal ulcers following therapeutic endoscopy for acute bleeding gastric or duodenal ulcers in adults. (1.2).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole sodium for injection is ( S)-5-methoxy-2[[(4-methoxy-3,5- dimethyl-2-pyridinyl)-methyl]sulfinyl]-1 H-benzimidazole sodium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. Its empirical formula is C 17H 18N 3O 3SNa with molecular weight of 367.4 g/mol (sodium salt) and 345.4 g/mol (parent compound). Esomeprazole sodium is very soluble in water and freely soluble in ethanol (95%). The structural formula is:. Esomeprazole sodium for injection is supplied as a sterile, lyophilized, white to off-white, porous cake or powder in a 5 mL single-dose vial, intended for intravenous administration after reconstitution with 0.9% Sodium Chloride Injection, USP; Lactated Ringer’s Injection, USP or 5% Dextrose Injection, USP. Esomeprazole sodium for injection contains 40 mg esomeprazole (equivalent to 42.5 mg esomeprazole sodium), edetate disodium 1.5 mg and sodium hydroxide q.s. for pH adjustment. The pH of reconstituted solution of esomeprazole sodium for injection depends on the reconstitution volume and is in the pH range of 9 to 11. The stability of esomeprazole sodium in aqueous solution is strongly pH dependent. The rate of degradation increases with decreasing pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-203-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-203-80)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0203-80</NDC11Code>
    <ProductNDC>70436-203</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dobutamine</ProprietaryName>
    <NonProprietaryName>Dobutamine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230403</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216131</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals</LabelerName>
    <SubstanceName>DOBUTAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/20mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230403</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dobutamine Injection, USP is indicated when parenteral therapy is necessary for inotropic support in the short-term treatment of patients with cardiac decompensation due to depressed contractility resulting either from organic heart disease or from cardiac surgical procedures. Experience with intravenous dobutamine in controlled trials does not extend beyond 48 hours of repeated boluses and/or continuous infusions. Whether given orally, continuously intravenously, or intermittently intravenously, neither dobutamine nor any other cyclic-AMP-dependent inotrope has been shown in controlled trials to be safe or effective in the long-term treatment of congestive heart failure. In controlled trials of chronic oral therapy with various such agents, symptoms were not consistently alleviated, and the cyclic-AMP-dependent inotropes were consistently associated with increased risk of hospitalization and death. Patients with NYHA Class IV symptoms appeared to be at particular risk.</IndicationAndUsage>
    <Description>Dobutamine Injection, USP is a clear, practically colorless, sterile, nonpyrogenic solution of dobutamine hydrochloride for intravenous use only. Each milliliter contains 12.5 mg (41.5 µmol) dobutamine, as the hydrochloride and sodium metabisulfite, 0.2 mg added as antioxidant. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH is 3.3 (2.5 to 5.0). Dobutamine Hydrochloride, USP is chemically designated (±)-4-[2-[[3-(ρ-hydroxyphenyl)-1- methylpropyl] amino]ethyl]-pyrocatechol hydrochloride. It is a synthetic catecholamine. Molecular Weight: 337.85. Molecular Formula: C 18H 23NO 3 HCl.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-205-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-205-80)  / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0205-80</NDC11Code>
    <ProductNDC>70436-205</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Nitroprusside In 0.9% Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Nitroprusside In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221231</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215846</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221231</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium nitroprusside is a direct acting vasodilator indicated for: 1 Immediate reduction of blood pressure ( 1.1) , 2 Producing controlled hypotension to reduce bleeding during surgery ( 1.2) , 3 Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure ( 1.3) .</IndicationAndUsage>
    <Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate (2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has a molecular formula Na 2[Fe(CN) 5NO]  2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration (2.1)]. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-207-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-207-80)  / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0207-80</NDC11Code>
    <ProductNDC>70436-207</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Nitroprusside In 0.9% Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Nitroprusside In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221231</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215846</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>SODIUM NITROPRUSSIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Vasodilation [PE], Vasodilator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221231</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium nitroprusside is a direct acting vasodilator indicated for: 1 Immediate reduction of blood pressure ( 1.1) , 2 Producing controlled hypotension to reduce bleeding during surgery ( 1.2) , 3 Treatment of acute heart failure to reduce left ventricular end-diastolic pressure, pulmonary capillary wedge pressure, peripheral vascular resistance and mean arterial blood pressure ( 1.3) .</IndicationAndUsage>
    <Description>Sodium nitroprusside is disodium pentacyanonitrosylferrate (2-) dihydrate, a hypotensive agent whose structural formula is. Sodium Nitroprusside has a molecular formula Na 2[Fe(CN) 5NO]  2H 2O and molecular weight of 297.95. Dry sodium nitroprusside is a reddish-brown powder, soluble in water. Sodium nitroprusside solution is rapidly degraded by trace contaminants, often with resulting color changes [see Dosage and Administration (2.1)]. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 50 mg of sodium nitroprusside (0.5 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 100-mL vial. Each 100 mL of solution in vial contains 20 mg of sodium nitroprusside (0.2 mg/mL), 900 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP. Sodium Nitroprusside in 0.9% Sodium Chloride Injection, ready to use is also supplied as a sterile, unpreserved, colorless to red-brown solution packaged in a single-dose 50-mL vial. Each 50 mL of solution in vial contains 10 mg of sodium nitroprusside (0.2 mg/mL), 450 mg of sodium chloride, USP (9 mg/mL), in sterile water for injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-209-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-209-80)  / 17.5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0209-80</NDC11Code>
    <ProductNDC>70436-209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levoleucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Levoleucovorin Injection</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217314</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals</LabelerName>
    <SubstanceName>LEVOLEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levoleucovorin injection is indicated for: 1 rescue after high-dose methotrexate therapy in adult and pediatric patients with osteosarcoma., 2 diminishing the toxicity associated with overdosage of folic acid antagonists or impaired methotrexate elimination in adult and pediatric patients., 3 the treatment of adults with metastatic colorectal cancer in combination with fluorouracil.</IndicationAndUsage>
    <Description>Levoleucovorin is a folate analog and the pharmacologically active levo-isomer of d,l-leucovorin. The chemical name of levoleucovorin calcium is calcium (6S)-N-{4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl}-L-glutamate mixed hydrates. The molecular formula is C 20H 21CaN 7O 7●nH 2O (n = 3.2 to 5.8) and the molecular weight is 569.1 to 616.0. The molecular structure is:. Levoleucovorin injection, for intravenous use is supplied as a colorless to faint yellow solution of either 175 mg levoleucovorin in 17.5 mL or 250 mg levoleucovorin in 25 mL per single-dose vial. Each mL contains 10 mg levoleucovorin (equivalent to 10.8 mg levoleucovorin calcium (as mixed hydrates)) and 8.3 mg sodium chloride. Sodium hydroxide is used for pH adjustment to pH 8.2 (6.5 to 8.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>70436-210-80</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70436-210-80)  / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70436-0210-80</NDC11Code>
    <ProductNDC>70436-210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levoleucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Levoleucovorin Injection</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217314</ApplicationNumber>
    <LabelerName>Slate Run Pharmaceuticals</LabelerName>
    <SubstanceName>LEVOLEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levoleucovorin injection is indicated for: 1 rescue after high-dose methotrexate therapy in adult and pediatric patients with osteosarcoma., 2 diminishing the toxicity associated with overdosage of folic acid antagonists or impaired methotrexate elimination in adult and pediatric patients., 3 the treatment of adults with metastatic colorectal cancer in combination with fluorouracil.</IndicationAndUsage>
    <Description>Levoleucovorin is a folate analog and the pharmacologically active levo-isomer of d,l-leucovorin. The chemical name of levoleucovorin calcium is calcium (6S)-N-{4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl}-L-glutamate mixed hydrates. The molecular formula is C 20H 21CaN 7O 7●nH 2O (n = 3.2 to 5.8) and the molecular weight is 569.1 to 616.0. The molecular structure is:. Levoleucovorin injection, for intravenous use is supplied as a colorless to faint yellow solution of either 175 mg levoleucovorin in 17.5 mL or 250 mg levoleucovorin in 25 mL per single-dose vial. Each mL contains 10 mg levoleucovorin (equivalent to 10.8 mg levoleucovorin calcium (as mixed hydrates)) and 8.3 mg sodium chloride. Sodium hydroxide is used for pH adjustment to pH 8.2 (6.5 to 8.5).</Description>
  </NDC>
</NDCList>