RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70511-182-84</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70511-182-84)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (70511-182-15) </PackageDescription>
    <NDC11Code>70511-0182-84</NDC11Code>
    <ProductNDC>70511-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Daptomycin</ProprietaryName>
    <NonProprietaryName>Daptomycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250908</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217630</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DAPTOMYCIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250908</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of:  Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) (1.1) and,  Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2)  Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (1.3). Limitations of Use:  Daptomycin for Injection is not indicated for the treatment of pneumonia. (1.4)  Daptomycin for Injection is not indicated for the treatment of left-sided infective endocarditis due to S. aureus. (1.4)  Daptomycin for Injection is not recommended in pediatric patients younger than one year of age due to the risk of potential effects on muscular, neuromuscular, and/or nervous systems (either peripheral and/or central) observed in neonatal dogs. (1.4). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Daptomycin for Injection and other antibacterial drugs, Daptomycin for Injection should be used to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.5).</IndicationAndUsage>
    <Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L- aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L- alanine ε1-lactone. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. The chemical structure is. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown lyophilized powder containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with Sterile Water for Injection [see Dosage and Administration (2.7)]. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown. : 1 Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 210 mg arginine hydrochloride. Hydrochloric acid and/or sodium hydroxide is used to adjust the pH. , 2 Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 300 mg arginine hydrochloride. Hydrochloric acid and/or sodium hydroxide is used to adjust the pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-131-84</NDCCode>
    <PackageDescription>10 VIAL in 1 PACKAGE (70511-131-84)  / 5 mL in 1 VIAL (70511-131-05) </PackageDescription>
    <NDC11Code>70511-0131-84</NDC11Code>
    <ProductNDC>70511-131</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sincalide</ProprietaryName>
    <NonProprietaryName>Sincalide</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221125</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA210850</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SINCALIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>ug/5mL</StrengthUnit>
    <Pharm_Classes>Cholecystokinin Analog [EPC], Cholecystokinin [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sincalide for Injection is indicated in adults to: 1 stimulate gallbladder contraction, as may be assessed by various methods of diagnostic imaging, or to obtain by duodenal aspiration a sample of concentrated bile for analysis of cholesterol, bile salts, phospholipids, and crystals;, 2 stimulate pancreatic secretion in combination with secretin prior to obtaining a duodenal aspirate for analysis of enzyme activity, composition, and cytology;, 3 accelerate the transit of a barium meal through the small bowel, thereby decreasing the time and extent of radiation associated with fluoroscopy and x-ray examination of the intestinal tract.</IndicationAndUsage>
    <Description>Sincalide for Injection is a cholecystopancreatic-gastrointestinal hormone for parenteral administration. The agent is a synthetically-prepared C-terminal octapeptide of cholecystokinin. Each single-dose vial of sincalide provides a sterile nonpyrogenic lyophilized white to off-white cake or powder consisting of 5 mcg sincalide with 30 mg arginine hydrochloride, 15 mg lysine hydrochloride,170 mg mannitol, 4 mg methionine, 2 mg pentetic acid, and 0.04 mg sodium metabisulfite. The pH is adjusted to 6.5 to 7.5 with hydrochloric acid and/or sodium hydroxide prior to lyophilization. Sincalide is designated chemically as L-α-aspartyl-O- sulfo-L-tyrosyl-L-methionylglycyl-L-tryptophyl-L-methionyl-   L-α-aspartyl-L-phenylalaninamide. Graphic formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-141-84</NDCCode>
    <PackageDescription>1 VIAL in 1 PACKAGE (70511-141-84)  &gt; 10 INJECTION, SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>70511-0141-84</NDC11Code>
    <ProductNDC>70511-141</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Angiomax Rtu</ProprietaryName>
    <NonProprietaryName>Bivalirudin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190808</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA211215</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BIVALIRUDIN</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190808</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ANGIOMAX RTU is indicated for use as an anticoagulant in patients undergoing percutaneous coronary intervention (PCI), including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.</IndicationAndUsage>
    <Description>ANGIOMAX RTU contains bivalirudin trifluoroacetate, which is a specific and reversible direct thrombin inhibitor. Bivalirudin trifluoroacetate is a synthetic, 20 amino acid peptide salt, with the chemical name of D-phenylalanyl-L-prolyl-L-arginyl-L-prolylglycylglycylglycylglycyl-L-asparagylglycyl-L-α-aspartyl-L-phenylalanyl-L-α-glutamyl-L-α-glutamyl-L-isoleucyl-L-prolyl-L-α-glutamyl-L-α-glutamyl-L-tyrosyl-L-leucine trifluoroacetate. Each molecule of bivalirudin trifluoroacetate contains 1.7 to 2.6 equivalents of trifluoroacetic acid. The molecular formula of bivalirudin free base is C98H138N24O33 and its molecular weight is 2180.32 Daltons (anhydrous free base peptide). The structural formula of bivalirudin free base is. Figure 1: Structural Formula of Bivalirudin. ANGIOMAX RTU is supplied as a refrigerated, ready-to-use, sterile solution, containing 250 mg of bivalirudin (equivalent to an average of 275 mg of bivalirudin trifluoroacetate*) 5 g polyethylene glycol 400, 40 mg sodium acetate trihydrate, and water for injection in single-dose 50 mL vials. The pH of ANGIOMAX RTU may have been adjusted with sodium hydroxide and/or hydrochloric acid to 5.0 to 5.5. The solution is intended for intravenous use at room temperature. *The range of bivalirudin trifluoroacetate is 270 to 280 mg based on a range of trifluoroacetic acid composition of 1.7 to 2.6 equivalents.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-142-84</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70511-142-84)  / 1 INJECTION, SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70511-0142-84</NDC11Code>
    <ProductNDC>70511-142</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bivalirudin</ProprietaryName>
    <NonProprietaryName>Bivalirudin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240527</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA211215</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BIVALIRUDIN</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bivalirudin Injection is indicated for use as an anticoagulant in patients undergoing percutaneous coronary intervention (PCI), including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.</IndicationAndUsage>
    <Description>Bivalirudin Injection contains bivalirudin trifluoroacetate, which is a specific and reversible direct thrombin inhibitor. Bivalirudin trifluoroacetate is a synthetic, 20 amino acid peptide salt, with the chemical name of D-phenylalanyl-L-prolyl-L-arginyl-L-prolylglycylglycylglycylglycyl-L-asparagylglycyl-L-α-aspartyl-L-phenylalanyl-L-α-glutamyl-L-α-glutamyl-L-isoleucyl-L-prolyl-L-α-glutamyl-L-α-glutamyl-L-tyrosyl-L-leucine trifluoroacetate. Each molecule of bivalirudin trifluoroacetate contains 1.7 to 2.6 equivalents of trifluoroacetic acid. The molecular formula of bivalirudin free base is C98H138N24O33 and its molecular weight is 2180.32 Daltons (anhydrous free base peptide). The structural formula of bivalirudin free base is. Figure 1: Structural Formula of Bivalirudin. Bivalirudin Injection is supplied as a refrigerated, ready-to-use, sterile solution packaged in a 50 mL single-dose vial. Each milliliter of Bivalirudin Injection contains 5 mg bivalirudin (as trifluoroacetate salt)*, 0.8 mg sodium acetate trihydrate, 100 mg polyethylene glycol 400, and Water for Injection. The pH of Bivalirudin Injection may have been adjusted with sodium hydroxide and/or glacial acetic acid to 5.0 to 5.5. The solution is intended for intravenous administration at room temperature (20ºC to 25°C/68ºF to 77°F). *The range of bivalirudin trifluoroacetate is 5.4 to 5.6 mg based on a range of trifluoroacetic acid composition of 1.7 to 2.6 equivalents.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-181-84</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70511-181-84)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (70511-181-10) </PackageDescription>
    <NDC11Code>70511-0181-84</NDC11Code>
    <ProductNDC>70511-181</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Daptomycin</ProprietaryName>
    <NonProprietaryName>Daptomycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217630</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DAPTOMYCIN</SubstanceName>
    <StrengthNumber>350</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of:  Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) (1.1) and,  Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis, (1.2)  Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (1.3). Limitations of Use:  Daptomycin for Injection is not indicated for the treatment of pneumonia. (1.4)  Daptomycin for Injection is not indicated for the treatment of left-sided infective endocarditis due to S. aureus. (1.4)  Daptomycin for Injection is not recommended in pediatric patients younger than one year of age due to the risk of potential effects on muscular, neuromuscular, and/or nervous systems (either peripheral and/or central) observed in neonatal dogs. (1.4). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Daptomycin for Injection and other antibacterial drugs, Daptomycin for Injection should be used to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.5).</IndicationAndUsage>
    <Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L- aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L- alanine ε1-lactone. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. The chemical structure is. Daptomycin for Injection is supplied in a single-dose vial as a sterile, preservative-free, pale yellow to light brown lyophilized powder containing 350 mg or 500 mg of daptomycin for intravenous (IV) use following reconstitution with Sterile Water for Injection [see Dosage and Administration (2.7)]. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown. : 1 Daptomycin for Injection 350 mg per vial, contains 350 mg daptomycin and 210 mg arginine hydrochloride. Hydrochloric acid and/or sodium hydroxide is used to adjust the pH. , 2 Daptomycin for Injection 500 mg per vial contains 500 mg daptomycin, and 300 mg arginine hydrochloride. Hydrochloric acid and/or sodium hydroxide is used to adjust the pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>14141-182-01</NDCCode>
    <PackageDescription>9 g in 1 JAR (14141-182-01) </PackageDescription>
    <NDC11Code>14141-0182-01</NDC11Code>
    <ProductNDC>14141-182</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Clarite Makeup For A Cleaner Appearance Spf 30 250-f</ProprietaryName>
    <NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200324</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>BEL STAR S A</LabelerName>
    <SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
    <StrengthNumber>7.5; 7.84</StrengthNumber>
    <StrengthUnit>g/100g; g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-12-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200324</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>51655-182-25</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (51655-182-25)</PackageDescription>
    <NDC11Code>51655-0182-25</NDC11Code>
    <ProductNDC>51655-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hcl</ProprietaryName>
    <NonProprietaryName>Tramadol Hcl</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20171003</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090404</ApplicationNumber>
    <LabelerName>Northwind Pharmaceuticals</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol Hydrochloride Tablets, USP are indicated for the management of pain in adults that is severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses (see WARNINGS), reserve tramadol for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Please review the manufacturer's complete drug information available from the FDA at www.fda.gov Permanent Link: https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=ee7179b7-6a08-4eeb-a787-5d697b02c4a2.</IndicationAndUsage>
    <Description>Tramadol hydrochloride tablets, USP are an opioid agonist. The chemical name for tramadol hydrochloride is (±) cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is: Please view structure at permalink below. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. The molecular weight of tramadol hydrochloride is 299.84. Each tramadol hydrochloride tablet intended for oral administration contains 50 mg of tramadol hydrochloride. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide. Please review the manufacturer's complete drug information available from the FDA at www.fda.gov Permanent Link: https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=ee7179b7-6a08-4eeb-a787-5d697b02c4a2.</Description>
  </NDC>
  <NDC>
    <NDCCode>72189-182-15</NDCCode>
    <PackageDescription>15 g in 1 TUBE (72189-182-15) </PackageDescription>
    <NDC11Code>72189-0182-15</NDC11Code>
    <ProductNDC>72189-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clotrimazole And Betamethasone Dipropionate</ProprietaryName>
    <NonProprietaryName>Clotrimazole And Betamethasone Dipropionate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20210223</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202894</ApplicationNumber>
    <LabelerName>Direct Rx</LabelerName>
    <SubstanceName>CLOTRIMAZOLE; BETAMETHASONE DIPROPIONATE</SubstanceName>
    <StrengthNumber>10; .5</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clotrimazole and betamethasone dipropionate cream is a combination of an azole antifungal and corticosteroid and is indicated for the topical treatment of symptomatic inflammatory tinea pedis, tinea cruris, and tinea corporis due to Epidermophyton floccosum, Trichophyton mentagrophytes, and Trichophyton rubrum in patients 17 years and older.</IndicationAndUsage>
    <Description>Clotrimazole and Betamethasone Dipropionate Cream USP, 1%/0.05% (base), contains combinations of clotrimazole, USP, an azole antifungal, and betamethasone dipropionate, USP, a corticosteroid, for topical use. Chemically, clotrimazole, USP is 1-[(2-Chlorophenyl)diphenylmethyl]-1H-imidazole, with the empirical formula C22H17ClN2, a molecular weight of 344.84 g/mol, and the following structural formula. [Clotrimazolestructure]. Clotrimazole, USP is a white to pale yellow, crystalline powder, odorless, practically insoluble in water, freely soluble in methanol, in acetone, in chloroform and in alcohol. Betamethasone dipropionate, USP has the chemical name 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the empirical formula C28H37FO7, a molecular weight of 504.60 g/mol, and the following structural formula. [betamethasonestructure]. Betamethasone dipropionate, USP is a white to almost white crystalline powder, practically insoluble in water, freely soluble in acetone and in methylene chloride, sparingly soluble in alcohol. Each gram of Clotrimazole and Betamethasone Dipropionate Cream USP, 1%/0.05% (base) contains 10 mg clotrimazole, USP and 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone), in a white to off-white, uniform and smooth cream consisting of benzyl alcohol, ceteareth-30, cetyl alcohol, mineral oil, monobasic sodium phosphate, phosphoric acid, propylene glycol, purified water, sodium hydroxide, stearyl alcohol, and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>72578-182-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (72578-182-01) </PackageDescription>
    <NDC11Code>72578-0182-01</NDC11Code>
    <ProductNDC>72578-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin</ProprietaryName>
    <NonProprietaryName>Doxepin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202761</ApplicationNumber>
    <LabelerName>Viona Pharmaceuticals Inc</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin tablets are indicated for the treatment of insomnia characterized by difficulties with sleep maintenance. (1, 14).</IndicationAndUsage>
    <Description>Doxepin is available in 3 mg and 6 mg strength tablets for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride, USP equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride, USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-dibenz[b,e]oxepin-11(6H)ylidene-N,N-dimethyl-hydrochloride. It has the following structure. Doxepin hydrochloride, USP is a white or almost white crystalline powder, that is readily soluble in water, in alcohol and in methylene chloride. It has a molecular weight of 315.84 and molecular formula of C19H21NOHCl. Each doxepin tablet contains the following inactive ingredients: FD&amp;C Blue No.1 aluminium lake, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium starch glycolate and talc. In addition 6 mg tablet also contains D&amp;C Yellow No. 10 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>72578-182-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (72578-182-05) </PackageDescription>
    <NDC11Code>72578-0182-05</NDC11Code>
    <ProductNDC>72578-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin</ProprietaryName>
    <NonProprietaryName>Doxepin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202761</ApplicationNumber>
    <LabelerName>Viona Pharmaceuticals Inc</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin tablets are indicated for the treatment of insomnia characterized by difficulties with sleep maintenance. (1, 14).</IndicationAndUsage>
    <Description>Doxepin is available in 3 mg and 6 mg strength tablets for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride, USP equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride, USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-dibenz[b,e]oxepin-11(6H)ylidene-N,N-dimethyl-hydrochloride. It has the following structure. Doxepin hydrochloride, USP is a white or almost white crystalline powder, that is readily soluble in water, in alcohol and in methylene chloride. It has a molecular weight of 315.84 and molecular formula of C19H21NOHCl. Each doxepin tablet contains the following inactive ingredients: FD&amp;C Blue No.1 aluminium lake, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium starch glycolate and talc. In addition 6 mg tablet also contains D&amp;C Yellow No. 10 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>72578-182-06</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (72578-182-06) </PackageDescription>
    <NDC11Code>72578-0182-06</NDC11Code>
    <ProductNDC>72578-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin</ProprietaryName>
    <NonProprietaryName>Doxepin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202761</ApplicationNumber>
    <LabelerName>Viona Pharmaceuticals Inc</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin tablets are indicated for the treatment of insomnia characterized by difficulties with sleep maintenance. (1, 14).</IndicationAndUsage>
    <Description>Doxepin is available in 3 mg and 6 mg strength tablets for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride, USP equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride, USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-dibenz[b,e]oxepin-11(6H)ylidene-N,N-dimethyl-hydrochloride. It has the following structure. Doxepin hydrochloride, USP is a white or almost white crystalline powder, that is readily soluble in water, in alcohol and in methylene chloride. It has a molecular weight of 315.84 and molecular formula of C19H21NOHCl. Each doxepin tablet contains the following inactive ingredients: FD&amp;C Blue No.1 aluminium lake, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium starch glycolate and talc. In addition 6 mg tablet also contains D&amp;C Yellow No. 10 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>72578-182-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (72578-182-10) </PackageDescription>
    <NDC11Code>72578-0182-10</NDC11Code>
    <ProductNDC>72578-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin</ProprietaryName>
    <NonProprietaryName>Doxepin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202761</ApplicationNumber>
    <LabelerName>Viona Pharmaceuticals Inc</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin tablets are indicated for the treatment of insomnia characterized by difficulties with sleep maintenance. (1, 14).</IndicationAndUsage>
    <Description>Doxepin is available in 3 mg and 6 mg strength tablets for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride, USP equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride, USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-dibenz[b,e]oxepin-11(6H)ylidene-N,N-dimethyl-hydrochloride. It has the following structure. Doxepin hydrochloride, USP is a white or almost white crystalline powder, that is readily soluble in water, in alcohol and in methylene chloride. It has a molecular weight of 315.84 and molecular formula of C19H21NOHCl. Each doxepin tablet contains the following inactive ingredients: FD&amp;C Blue No.1 aluminium lake, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium starch glycolate and talc. In addition 6 mg tablet also contains D&amp;C Yellow No. 10 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>72578-182-16</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (72578-182-16) </PackageDescription>
    <NDC11Code>72578-0182-16</NDC11Code>
    <ProductNDC>72578-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin</ProprietaryName>
    <NonProprietaryName>Doxepin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202761</ApplicationNumber>
    <LabelerName>Viona Pharmaceuticals Inc</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin tablets are indicated for the treatment of insomnia characterized by difficulties with sleep maintenance. (1, 14).</IndicationAndUsage>
    <Description>Doxepin is available in 3 mg and 6 mg strength tablets for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride, USP equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride, USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-dibenz[b,e]oxepin-11(6H)ylidene-N,N-dimethyl-hydrochloride. It has the following structure. Doxepin hydrochloride, USP is a white or almost white crystalline powder, that is readily soluble in water, in alcohol and in methylene chloride. It has a molecular weight of 315.84 and molecular formula of C19H21NOHCl. Each doxepin tablet contains the following inactive ingredients: FD&amp;C Blue No.1 aluminium lake, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium starch glycolate and talc. In addition 6 mg tablet also contains D&amp;C Yellow No. 10 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>72578-182-77</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (72578-182-77)  / 10 TABLET in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>72578-0182-77</NDC11Code>
    <ProductNDC>72578-182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin</ProprietaryName>
    <NonProprietaryName>Doxepin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202761</ApplicationNumber>
    <LabelerName>Viona Pharmaceuticals Inc</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin tablets are indicated for the treatment of insomnia characterized by difficulties with sleep maintenance. (1, 14).</IndicationAndUsage>
    <Description>Doxepin is available in 3 mg and 6 mg strength tablets for oral administration. Each tablet contains 3.39 mg or 6.78 mg doxepin hydrochloride, USP equivalent to 3 mg and 6 mg of doxepin, respectively. Chemically, doxepin hydrochloride, USP is an (E) and (Z) geometric, isomeric mixture of 1 propanamine, 3-dibenz[b,e]oxepin-11(6H)ylidene-N,N-dimethyl-hydrochloride. It has the following structure. Doxepin hydrochloride, USP is a white or almost white crystalline powder, that is readily soluble in water, in alcohol and in methylene chloride. It has a molecular weight of 315.84 and molecular formula of C19H21NOHCl. Each doxepin tablet contains the following inactive ingredients: FD&amp;C Blue No.1 aluminium lake, lactose monohydrate, magnesium stearate, pregelatinized starch, sodium starch glycolate and talc. In addition 6 mg tablet also contains D&amp;C Yellow No. 10 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-101-50</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70511-101-50)  / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70511-0101-50</NDC11Code>
    <ProductNDC>70511-101</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Phenylacetate And Sodium Benzoate</ProprietaryName>
    <NonProprietaryName>Sodium Phenylacetate And Sodium Benzoate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170522</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208521</ApplicationNumber>
    <LabelerName>MAIA PHARMACEUTICALS, INC</LabelerName>
    <SubstanceName>SODIUM PHENYLACETATE; SODIUM BENZOATE</SubstanceName>
    <StrengthNumber>100; 100</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Ammonium Ion Binding Activity [MoA], Ammonium Ion Binding Activity [MoA], Nitrogen Binding Agent [EPC], Nitrogen Binding Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170522</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium phenylacetate and sodium benzoate injection is indicated as adjunctive therapy in pediatric and adult patients for the treatment of acute hyperammonemia and associated encephalopathy in patients with deficiencies in enzymes of the urea cycle. During acute hyperammonemic episodes, arginine supplementation, caloric supplementation, dietary protein restriction, hemodialysis, and other ammonia lowering therapies should be considered [see Warnings and Precautions (5)].</IndicationAndUsage>
    <Description>Sodium phenylacetate and sodium benzoate injection (sodium phenylacetate and sodium benzoate) Injection 10% per 10% (a nitrogen binding agent), is a sterile, concentrated, aqueous solution of sodium phenylacetate and sodium benzoate. The pH of the solution is between 6 and 8. Sodium phenylacetate is a crystalline, white to off-white powder with a strong, offensive odor. It is soluble in water. Sodium benzoate is a white to off-white and odorless, crystalline powder that is readily soluble in water. Figure 1. Sodium phenylacetate has a molecular weight of 158.14 and the molecular formula C8H7NaO2. Sodium benzoate has a molecular weight of 144.10 and the molecular formula C7H5NaO2. Each mL of sodium phenylacetate and sodium benzoate injection contains 100 mg of sodium phenylacetate and 100 mg of sodium benzoate, and Water for Injection. Sodium hydroxide and/or hydrochloric acid may have been used for pH adjustment. Sodium phenylacetate and sodium benzoate injection injection is a sterile, concentrated solution intended for intravenous administration via a central venous catheter only after dilution [see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-102-20</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70511-102-20)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70511-0102-20</NDC11Code>
    <ProductNDC>70511-102</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Phenylacetate And Sodium Benzoate</ProprietaryName>
    <NonProprietaryName>Sodium Phenylacetate And Sodium Benzoate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210701</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215025</ApplicationNumber>
    <LabelerName>MAIA PHARMACEUTICALS</LabelerName>
    <SubstanceName>SODIUM PHENYLACETATE; SODIUM BENZOATE</SubstanceName>
    <StrengthNumber>100; 100</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Ammonium Ion Binding Activity [MoA], Ammonium Ion Binding Activity [MoA], Nitrogen Binding Agent [EPC], Nitrogen Binding Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium Phenylacetate and Sodium Benzoate Injection is indicated as adjunctive therapy in pediatric and adult patients for the treatment of acute hyperammonemia and associated encephalopathy in patients with deficiencies in enzymes of the urea cycle. During acute hyperammonemic episodes, arginine supplementation, caloric supplementation, dietary protein restriction, hemodialysis, and other ammonia lowering therapies should be considered [see Warnings and Precautions (5)].</IndicationAndUsage>
    <Description>Sodium Phenylacetate and Sodium Benzoate Injection 10% per 10% (a nitrogen binding agent) is a sterile, concentrated, aqueous solution of sodium phenylacetate and sodium benzoate. The pH of the solution is between 7.5 and 8.3. Sodium phenylacetate is a white to off-white powder. It is soluble in water. Sodium benzoate is a white to off-white and powder that is readily soluble in water. ​Figure 1. Sodium Phenylacetate has a molecular weight of 158.14 and the molecular formula C​8​H5NaO2​. Sodium benzoate has molecular weight of 144.10 and the molecular formula C7H5NaO2. Each mL of Sodium Phenylacetate and Sodium Benzoate Injection contains 100 mg of sodium phenylacetate and 100 mg of sodium benzoate, and Water for Injection. Sodium hydroxide and/or hydrochloric acid may have been used for pH adjustment. Sodium Phenylacetate and Sodium Benzoate Injection is a sterile, concentrated solution intended for intravenous administration via a central catheter only after dilution ​[see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-111-10</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (70511-111-10)  / 5 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>70511-0111-10</NDC11Code>
    <ProductNDC>70511-111</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20181227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208749</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM ANHYDROUS</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>ug/5mL</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levothyroxine Sodium for Injection is indicated for the treatment of myxedema coma. Important Limitations of Use: The relative bioavailability between Levothyroxine Sodium for Injection and oral levothyroxine products has not been established. Caution should be used when switching patients from oral levothyroxine products to Levothyroxine Sodium for Injection as accurate dosing conversion has not been studied.</IndicationAndUsage>
    <Description>Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C15H10I4NNaO4, a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula. Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder. Each vial contains: 100 mcg, 200 mcg or 500 mcg of levothyroxine sodium (the active ingredient), and the excipients dibasic sodium phosphate heptahydrate 0.944 mg; mannitol 3.0 mg; and sodium hydroxide for pH adjustment at the range of pH value 9.5-11.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-112-10</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (70511-112-10)  / 5 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>70511-0112-10</NDC11Code>
    <ProductNDC>70511-112</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20181227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208749</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM ANHYDROUS</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>ug/5mL</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levothyroxine Sodium for Injection is indicated for the treatment of myxedema coma. Important Limitations of Use: The relative bioavailability between Levothyroxine Sodium for Injection and oral levothyroxine products has not been established. Caution should be used when switching patients from oral levothyroxine products to Levothyroxine Sodium for Injection as accurate dosing conversion has not been studied.</IndicationAndUsage>
    <Description>Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C15H10I4NNaO4, a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula. Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder. Each vial contains: 100 mcg, 200 mcg or 500 mcg of levothyroxine sodium (the active ingredient), and the excipients dibasic sodium phosphate heptahydrate 0.944 mg; mannitol 3.0 mg; and sodium hydroxide for pH adjustment at the range of pH value 9.5-11.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-113-10</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (70511-113-10)  / 5 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>70511-0113-10</NDC11Code>
    <ProductNDC>70511-113</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20181227</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208749</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM ANHYDROUS</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>ug/5mL</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181227</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levothyroxine Sodium for Injection is indicated for the treatment of myxedema coma. Important Limitations of Use: The relative bioavailability between Levothyroxine Sodium for Injection and oral levothyroxine products has not been established. Caution should be used when switching patients from oral levothyroxine products to Levothyroxine Sodium for Injection as accurate dosing conversion has not been studied.</IndicationAndUsage>
    <Description>Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C15H10I4NNaO4, a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula. Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder. Each vial contains: 100 mcg, 200 mcg or 500 mcg of levothyroxine sodium (the active ingredient), and the excipients dibasic sodium phosphate heptahydrate 0.944 mg; mannitol 3.0 mg; and sodium hydroxide for pH adjustment at the range of pH value 9.5-11.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-121-80</NDCCode>
    <PackageDescription>2 SYRINGE, GLASS in 1 CARTON (70511-121-80)  / 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>70511-0121-80</NDC11Code>
    <ProductNDC>70511-121</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRATHECAL</RouteName>
    <StartMarketingDate>20210402</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210777</ApplicationNumber>
    <LabelerName>MAlA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-05-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen Injection is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of Baclofen Injection via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. Baclofen Injection is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of Baclofen Injection into the intrathecal space. Spasticity of Spinal Cord Origin: Evidence supporting the efficacy of Baclofen Injection was obtained in randomized, controlled investigations that compared the effects of either a single intrathecal dose or a three day intrathecal infusion of Baclofen Injection to placebo in patients with severe spasticity and spasms due to either spinal cord trauma or multiple sclerosis. Baclofen Injection was superior to placebo on both principal outcome measures employed: change from baseline in the Ashworth rating of spasticity and the frequency of spasms. Spasticity of Cerebral Origin: The efficacy of Baclofen Injection was investigated in three controlled clinical trials; two enrolled patients with cerebral palsy and one enrolled patients with spasticity due to previous brain injury. The first study, a randomized controlled cross-over trial of 51 patients with cerebral palsy, provided strong, statistically significant results; Baclofen Injection was superior to placebo in reducing spasticity as measured by the Ashworth Scale. A second cross-over study was conducted in 11 patients with spasticity arising from brain injury. Despite the small sample size, the study yielded a nearly significant test statistic (p= 0.066) and provided directionally favorable results. The last study, however, did not provide data that could be reliably analyzed. Baclofen Injection therapy may be considered an alternative to destructive neurosurgical procedures. Prior to implantation of a device for chronic intrathecal infusion of Baclofen Injection, patients must show a response to Baclofen Injection in a screening trial (see Dosage and Administration).</IndicationAndUsage>
    <Description>Baclofen Injection, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. Baclofen Injection, USP is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of Baclofen Injection contains baclofen USP, 50 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 to ­ 7.0. Each prefilled syringe is intended for SINGLE DOSE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-121-83</NDCCode>
    <PackageDescription>5 CARTON in 1 CARTON (70511-121-83)  / 1 SYRINGE, GLASS in 1 CARTON (70511-121-06)  / 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>70511-0121-83</NDC11Code>
    <ProductNDC>70511-121</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRATHECAL</RouteName>
    <StartMarketingDate>20210402</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210777</ApplicationNumber>
    <LabelerName>MAlA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-05-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210402</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70511-122-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70511-122-10)  / 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70511-0122-10</NDC11Code>
    <ProductNDC>70511-122</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen (intrathecal)</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRATHECAL</RouteName>
    <StartMarketingDate>20190925</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210048</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190925</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen injection (intrathecal) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of baclofen injection (intrathecal) via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. Baclofen injection (intrathecal) is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of baclofen injection (intrathecal) into the intrathecal space. Spasticity of Spinal Cord Origin: Evidence supporting the efficacy of baclofen injection (intrathecal) was obtained in randomized, controlled investigations that compared the effects of either a single intrathecal dose or a three-day intrathecal infusion of baclofen injection (intrathecal) to placebo in patients with severe spasticity and spasms due to either spinal cord trauma or multiple sclerosis. Baclofen injection (intrathecal) was superior to placebo on both principal outcome measures employed: change from baseline in the Ashworth rating of spasticity and the frequency of spasms. Spasticity of Cerebral Origin: The efficacy of baclofen injection (intrathecal) was investigated in three controlled clinical trials; two enrolled patients with cerebral palsy and one enrolled patients with spasticity due to previous brain injury. The first study, a randomized controlled cross-over trial of 51 patients with cerebral palsy, provided strong, statistically significant results; baclofen injection (intrathecal) was superior to placebo in reducing spasticity as measured by the Ashworth Scale. A second cross-over study was conducted in 11 patients with spasticity arising from brain injury. Despite the small sample size, the study yielded a nearly significant test statistic (p= 0.066) and provided directionally favorable results. The last study, however, did not provide data that could be reliably analyzed. Baclofen injection (intrathecal) therapy may be considered an alternative to destructive neurosurgical procedures. Prior to implantation of a device for chronic intrathecal infusion of baclofen injection (intrathecal), patients must show a response to baclofen injection (intrathecal) in a screening trial (see Dosage and Administration).</IndicationAndUsage>
    <Description>Baclofen injection (intrathecal), USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. Baclofen injection (intrathecal), USP is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of baclofen injection (intrathecal) contains baclofen U. S. P., 500 mcg or 2,000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 to 7.0. Each vial is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-123-20</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (70511-123-20)  / 20 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>70511-0123-20</NDC11Code>
    <ProductNDC>70511-123</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRATHECAL</RouteName>
    <StartMarketingDate>20201223</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210315</ApplicationNumber>
    <LabelerName>MAlA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen injection is indicated for use in the management of severe spasticity in adult and pediatric patients age 4 years and above. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of baclofen injection via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy.  Baclofen injection is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only with the Medtronic SynchroMed® II Programmable Pump or other pumps labeled for intrathecal administration of baclofen injection [see Clinical Studies (14)]. Prior to implantation of a device for chronic intrathecal infusion of baclofen injection, patients must show a response to baclofen injection in a screening trial [see Dosage and Administration (2.2)].</IndicationAndUsage>
    <Description>Baclofen injection is a muscle relaxant and antispastic. Baclofen's pharmacological class is a gamma-aminobutyric acid (GABA) ergic agonist. Baclofen's chemical name is 4-amino- 3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-124-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70511-124-10)  / 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70511-0124-10</NDC11Code>
    <ProductNDC>70511-124</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Baclofen (intrathecal)</ProprietaryName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRATHECAL</RouteName>
    <StartMarketingDate>20190925</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210048</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>2000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190925</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Baclofen injection (intrathecal) is indicated for use in the management of severe spasticity. Patients should first respond to a screening dose of intrathecal baclofen prior to consideration for long term infusion via an implantable pump. For spasticity of spinal cord origin, chronic infusion of baclofen injection (intrathecal) via an implantable pump should be reserved for patients unresponsive to oral baclofen therapy, or those who experience intolerable CNS side effects at effective doses. Patients with spasticity due to traumatic brain injury should wait at least one year after the injury before consideration of long term intrathecal baclofen therapy. Baclofen injection (intrathecal) is intended for use by the intrathecal route in single bolus test doses (via spinal catheter or lumbar puncture) and, for chronic use, only in implantable pumps approved by the FDA specifically for the administration of baclofen injection (intrathecal) into the intrathecal space. Spasticity of Spinal Cord Origin: Evidence supporting the efficacy of baclofen injection (intrathecal) was obtained in randomized, controlled investigations that compared the effects of either a single intrathecal dose or a three-day intrathecal infusion of baclofen injection (intrathecal) to placebo in patients with severe spasticity and spasms due to either spinal cord trauma or multiple sclerosis. Baclofen injection (intrathecal) was superior to placebo on both principal outcome measures employed: change from baseline in the Ashworth rating of spasticity and the frequency of spasms. Spasticity of Cerebral Origin: The efficacy of baclofen injection (intrathecal) was investigated in three controlled clinical trials; two enrolled patients with cerebral palsy and one enrolled patients with spasticity due to previous brain injury. The first study, a randomized controlled cross-over trial of 51 patients with cerebral palsy, provided strong, statistically significant results; baclofen injection (intrathecal) was superior to placebo in reducing spasticity as measured by the Ashworth Scale. A second cross-over study was conducted in 11 patients with spasticity arising from brain injury. Despite the small sample size, the study yielded a nearly significant test statistic (p= 0.066) and provided directionally favorable results. The last study, however, did not provide data that could be reliably analyzed. Baclofen injection (intrathecal) therapy may be considered an alternative to destructive neurosurgical procedures. Prior to implantation of a device for chronic intrathecal infusion of baclofen injection (intrathecal), patients must show a response to baclofen injection (intrathecal) in a screening trial (see Dosage and Administration).</IndicationAndUsage>
    <Description>Baclofen injection (intrathecal), USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl) butanoic acid, and its structural formula is. Baclofen is a white to off-white, odorless or practically odorless crystalline powder, with a molecular weight of 213.66. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. Baclofen injection (intrathecal), USP is a sterile, pyrogen-free, isotonic solution free of antioxidants, preservatives or other potentially neurotoxic additives indicated only for intrathecal administration. The drug is stable in solution at 37° C and compatible with CSF. Each milliliter of baclofen injection (intrathecal) contains baclofen U. S. P., 500 mcg or 2,000 mcg and sodium chloride 9 mg in Water for Injection; pH range is 5.0 to 7.0. Each vial is intended for SINGLE USE ONLY. Discard any unused portion. DO NOT AUTOCLAVE.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-141-50</NDCCode>
    <PackageDescription>1 INJECTION, SOLUTION in 1 CARTON (70511-141-50) </PackageDescription>
    <NDC11Code>70511-0141-50</NDC11Code>
    <ProductNDC>70511-141</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Angiomax Rtu</ProprietaryName>
    <NonProprietaryName>Bivalirudin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190808</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA211215</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BIVALIRUDIN</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190808</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ANGIOMAX RTU is indicated for use as an anticoagulant in patients undergoing percutaneous coronary intervention (PCI), including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.</IndicationAndUsage>
    <Description>ANGIOMAX RTU contains bivalirudin trifluoroacetate, which is a specific and reversible direct thrombin inhibitor. Bivalirudin trifluoroacetate is a synthetic, 20 amino acid peptide salt, with the chemical name of D-phenylalanyl-L-prolyl-L-arginyl-L-prolylglycylglycylglycylglycyl-L-asparagylglycyl-L-α-aspartyl-L-phenylalanyl-L-α-glutamyl-L-α-glutamyl-L-isoleucyl-L-prolyl-L-α-glutamyl-L-α-glutamyl-L-tyrosyl-L-leucine trifluoroacetate. Each molecule of bivalirudin trifluoroacetate contains 1.7 to 2.6 equivalents of trifluoroacetic acid. The molecular formula of bivalirudin free base is C98H138N24O33 and its molecular weight is 2180.32 Daltons (anhydrous free base peptide). The structural formula of bivalirudin free base is. Figure 1: Structural Formula of Bivalirudin. ANGIOMAX RTU is supplied as a refrigerated, ready-to-use, sterile solution, containing 250 mg of bivalirudin (equivalent to an average of 275 mg of bivalirudin trifluoroacetate*) 5 g polyethylene glycol 400, 40 mg sodium acetate trihydrate, and water for injection in single-dose 50 mL vials. The pH of ANGIOMAX RTU may have been adjusted with sodium hydroxide and/or hydrochloric acid to 5.0 to 5.5. The solution is intended for intravenous use at room temperature. *The range of bivalirudin trifluoroacetate is 270 to 280 mg based on a range of trifluoroacetic acid composition of 1.7 to 2.6 equivalents.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-142-50</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70511-142-50)  / 1 INJECTION, SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70511-0142-50</NDC11Code>
    <ProductNDC>70511-142</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bivalirudin</ProprietaryName>
    <NonProprietaryName>Bivalirudin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240527</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA211215</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BIVALIRUDIN</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-coagulant [EPC], Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bivalirudin Injection is indicated for use as an anticoagulant in patients undergoing percutaneous coronary intervention (PCI), including patients with heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis syndrome.</IndicationAndUsage>
    <Description>Bivalirudin Injection contains bivalirudin trifluoroacetate, which is a specific and reversible direct thrombin inhibitor. Bivalirudin trifluoroacetate is a synthetic, 20 amino acid peptide salt, with the chemical name of D-phenylalanyl-L-prolyl-L-arginyl-L-prolylglycylglycylglycylglycyl-L-asparagylglycyl-L-α-aspartyl-L-phenylalanyl-L-α-glutamyl-L-α-glutamyl-L-isoleucyl-L-prolyl-L-α-glutamyl-L-α-glutamyl-L-tyrosyl-L-leucine trifluoroacetate. Each molecule of bivalirudin trifluoroacetate contains 1.7 to 2.6 equivalents of trifluoroacetic acid. The molecular formula of bivalirudin free base is C98H138N24O33 and its molecular weight is 2180.32 Daltons (anhydrous free base peptide). The structural formula of bivalirudin free base is. Figure 1: Structural Formula of Bivalirudin. Bivalirudin Injection is supplied as a refrigerated, ready-to-use, sterile solution packaged in a 50 mL single-dose vial. Each milliliter of Bivalirudin Injection contains 5 mg bivalirudin (as trifluoroacetate salt)*, 0.8 mg sodium acetate trihydrate, 100 mg polyethylene glycol 400, and Water for Injection. The pH of Bivalirudin Injection may have been adjusted with sodium hydroxide and/or glacial acetic acid to 5.0 to 5.5. The solution is intended for intravenous administration at room temperature (20ºC to 25°C/68ºF to 77°F). *The range of bivalirudin trifluoroacetate is 5.4 to 5.6 mg based on a range of trifluoroacetic acid composition of 1.7 to 2.6 equivalents.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-161-05</NDCCode>
    <PackageDescription>1 INJECTION in 1 VIAL, SINGLE-DOSE (70511-161-05) </PackageDescription>
    <NDC11Code>70511-0161-05</NDC11Code>
    <ProductNDC>70511-161</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bortezomib</ProprietaryName>
    <NonProprietaryName>Bortezomib</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220811</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215331</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BORTEZOMIB</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proteasome Inhibitor [EPC], Proteasome Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220811</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Bortezomib Injection contains bortezomib which is a proteasome inhibitor.  Bortezomib is a modified dipeptidyl boronic acid. The chemical name for bortezomib, the monomeric boronic acid, is [(1R)-3-methyl-1-[[(2S)-1-oxo-3-phenyl-2-[(pyrazinylcarbonyl) amino]propyl]amino]butyl] boronic acid. Bortezomib has the following chemical structure. The molecular weight is 384.24. The molecular formula is C19H25BN4O4. The solubility of bortezomib, as the monomeric boronic acid, in water is 3.3 to 3.8 mg/mL in a pH range of 2 to 6.5. Bortezomib Injection is available as a ready-to-use sterile solution for intravenous injection: 1 Each mL of the 3.5 mg/3.5 mL (1 mg/mL) strength contains 1 mg of bortezomib, 10 mg mannitol, 0.82 mg sodium acetate, 20 mg dimethyl sulfoxide, in water for injection in a 5 mL single-dose vial. The pH may have been adjusted with hydrochloric acid or sodium hydroxide., 2 Each mL of the 3.5 mg/1.4 mg/mL (2.5 mg/mL) strength contains 2.5 mg of bortezomib, 25 mg mannitol, 0.82 mg sodium acetate, 22 mg dimethyl sulfoxide, in water for injection in a 2 mL single-dose vial.  The pH may have been adjusted with hydrochloric acid or sodium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70511-162-02</NDCCode>
    <PackageDescription>1 INJECTION in 1 VIAL, SINGLE-DOSE (70511-162-02) </PackageDescription>
    <NDC11Code>70511-0162-02</NDC11Code>
    <ProductNDC>70511-162</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bortezomib</ProprietaryName>
    <NonProprietaryName>Bortezomib</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220810</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215331</ApplicationNumber>
    <LabelerName>MAIA Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BORTEZOMIB</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proteasome Inhibitor [EPC], Proteasome Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220811</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Bortezomib Injection contains bortezomib which is a proteasome inhibitor.  Bortezomib is a modified dipeptidyl boronic acid. The chemical name for bortezomib, the monomeric boronic acid, is [(1R)-3-methyl-1-[[(2S)-1-oxo-3-phenyl-2-[(pyrazinylcarbonyl) amino]propyl]amino]butyl] boronic acid. Bortezomib has the following chemical structure. The molecular weight is 384.24. The molecular formula is C19H25BN4O4. The solubility of bortezomib, as the monomeric boronic acid, in water is 3.3 to 3.8 mg/mL in a pH range of 2 to 6.5. Bortezomib Injection is available as a ready-to-use sterile solution for intravenous injection: 1 Each mL of the 3.5 mg/3.5 mL (1 mg/mL) strength contains 1 mg of bortezomib, 10 mg mannitol, 0.82 mg sodium acetate, 20 mg dimethyl sulfoxide, in water for injection in a 5 mL single-dose vial. The pH may have been adjusted with hydrochloric acid or sodium hydroxide., 2 Each mL of the 3.5 mg/1.4 mg/mL (2.5 mg/mL) strength contains 2.5 mg of bortezomib, 25 mg mannitol, 0.82 mg sodium acetate, 22 mg dimethyl sulfoxide, in water for injection in a 2 mL single-dose vial.  The pH may have been adjusted with hydrochloric acid or sodium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>0065-0023-15</NDCCode>
    <PackageDescription>12 VIAL, GLASS in 1 CARTON (0065-0023-15)  / 1.5 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00065-0023-15</NDC11Code>
    <ProductNDC>0065-0023</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Miostat</ProprietaryName>
    <NonProprietaryName>Carbachol</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>19740415</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA016968</ApplicationNumber>
    <LabelerName>Alcon Laboratories, Inc.</LabelerName>
    <SubstanceName>CARBACHOL</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-02-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740415</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intraocular use for obtaining miosis during surgery. In addition, MIOSTAT* (carbachol intraocular solution, USP) 0.01% reduces the intensity of IOP elevation in the first 24 hours after cataract surgery.</IndicationAndUsage>
    <Description>MIOSTAT (carbachol intraocular solution, USP) 0.01% is a sterile balanced salt solution of carbachol for intraocular injection. The active ingredient is represented by the chemical structure. Established Name: Carbachol Chemical Name: Ethanaminium, 2-[(aminocarbonyl)oxy]-N,N,Ntrimethyl-, chloride. Molecular Formula: C6H15CIN2O2 Molecular Weight: 182.65. Each mL of MIOSTAT (carbachol intraocular solution, USP) 0.01%contains: Active: carbachol 0.01%. Inactives: sodium chloride 0.64%, potassium chloride 0.075%, calcium chloride dehydrate 0.048%, magnesium chloride hexahydrate 0.03%, sodium acetate trihydrate 0.39%, sodium citrate dihydrate 0.17%, sodium hydroxide and/or hydrochloric acid (to adjust pH) and Water for Injection. pH range is 6.5-7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0085-1366-03</NDCCode>
    <PackageDescription>5 PACKET in 1 CARTON (0085-1366-03)  / 1 CAPSULE in 1 PACKET (0085-1366-05) </PackageDescription>
    <NDC11Code>00085-1366-03</NDC11Code>
    <ProductNDC>0085-1366</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Temodar</ProprietaryName>
    <NonProprietaryName>Temozolomide</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19990811</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021029</ApplicationNumber>
    <LabelerName>Merck Sharp &amp; Dohme LLC</LabelerName>
    <SubstanceName>TEMOZOLOMIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19990811</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TEMODAR is an alkylating drug indicated for the treatment of adults with: 1 Newly diagnosed glioblastoma concomitantly with radiotherapy and then as maintenance treatment. (1.1), 2 Anaplastic astrocytoma. (1.2) Adjuvant treatment of adults with newly diagnosed anaplastic astrocytoma. (1.2)Treatment of adults with refractory anaplastic astrocytoma. (1.2).</IndicationAndUsage>
    <Description>Temozolomide is an alkylating drug. The chemical name of temozolomide is 3,4-dihydro-3-methyl-4-oxoimidazo[5,1-d]-as-tetrazine-8-carboxamide. The structural formula of temozolomide is. The material is a white to light tan or light pink powder with a molecular formula of C6H6N6O2 and a molecular weight of 194.15. The molecule is stable at acidic pH (&lt;5) and labile at pH &gt;7; hence TEMODAR can be administered orally and intravenously. The prodrug, temozolomide, is rapidly hydrolyzed to the active 5-(3-methyltriazen-1-yl) imidazole-4-carboxamide (MTIC) at neutral and alkaline pH values, with hydrolysis taking place even faster at alkaline pH. TEMODAR capsules. TEMODAR (temozolomide) capsules for oral use contains either 5 mg, 20 mg, 100 mg, 140 mg, 180 mg, or 250 mg of temozolomide. The inactive ingredients are as follows: 1 TEMODAR 5 mg: lactose anhydrous (132.8 mg), colloidal silicon dioxide (0.2 mg), sodium starch glycolate (7.5 mg), tartaric acid (1.5 mg), and stearic acid (3 mg)., 2 TEMODAR 20 mg: lactose anhydrous (182.2 mg), colloidal silicon dioxide (0.2 mg), sodium starch glycolate (11 mg), tartaric acid (2.2 mg), and stearic acid (4.4 mg)., 3 TEMODAR 100 mg: lactose anhydrous (175.7 mg), colloidal silicon dioxide (0.3 mg), sodium starch glycolate (15 mg), tartaric acid (3 mg), and stearic acid (6 mg)., 4 TEMODAR 140 mg: lactose anhydrous (246 mg), colloidal silicon dioxide (0.4 mg), sodium starch glycolate (21 mg), tartaric acid (4.2 mg), and stearic acid (8.4 mg)., 5 TEMODAR 180 mg: lactose anhydrous (316.3 mg), colloidal silicon dioxide (0.5 mg), sodium starch glycolate (27 mg), tartaric acid (5.4 mg), and stearic acid (10.8 mg)., 6 TEMODAR 250 mg: lactose anhydrous (154.3 mg), colloidal silicon dioxide (0.7 mg), sodium starch glycolate (22.5 mg), tartaric acid (9 mg), and stearic acid (13.5 mg).</Description>
  </NDC>
</NDCList>