{
"NDC": [
{
"NDCCode": "70512-842-25",
"PackageDescription": "25 VIAL in 1 CARTON (70512-842-25) / 1 mL in 1 VIAL (70512-842-01) ",
"NDC11Code": "70512-0842-25",
"ProductNDC": "70512-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217789",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230701",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS).Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.",
"Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) of ketorolac tromethamine in sterile solution. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, and 4.35 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color."
},
{
"NDCCode": "70512-840-25",
"PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (70512-840-25) / 1 mL in 1 VIAL, MULTI-DOSE (70512-840-01) ",
"NDC11Code": "70512-0840-25",
"ProductNDC": "70512-840",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyanocobalamin",
"NonProprietaryName": "Cyanocobalamin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20220803",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215417",
"LabelerName": "SOLA Pharmaceuticals",
"SubstanceName": "CYANOCOBALAMIN",
"StrengthNumber": "1000",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Vitamin B 12 [CS], Vitamin B12 [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220803",
"SamplePackage": "N",
"IndicationAndUsage": "Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug Interactions ), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue.Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin Injection, USP is also suitable for the vitamin B12 absorption test (Schilling test).",
"Description": "Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below."
},
{
"NDCCode": "70512-841-26",
"PackageDescription": "28 BAG in 1 CARTON (70512-841-26) / 250 mL in 1 BAG (70512-841-25) ",
"NDC11Code": "70512-0841-26",
"ProductNDC": "70512-841",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207956",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231220",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.",
"Description": "Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The pH ranges from 4.5 to 7.0. Composition, osmolarity, and ionic concentration are shown below. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The FLEBOFLEX and FLEBOFLEX LUER plastic containers are fabricated from latex-free polyolefins or polypropylene plastic materials. The solution contact materials do not contain PVC, DEHP, or other plasticizers. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. The suitability of the container materials has been established through biological evaluations, which have shown the containers pass Class VI U.S. Pharmacopeia (USP) testing for plastic containers. These tests confirm the biological safety of the container systems."
},
{
"NDCCode": "70512-843-25",
"PackageDescription": "25 VIAL in 1 CARTON (70512-843-25) / 1 mL in 1 VIAL (70512-843-01) ",
"NDC11Code": "70512-0843-25",
"ProductNDC": "70512-843",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217789",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230701",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS).Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.",
"Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) of ketorolac tromethamine in sterile solution. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, and 4.35 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color."
},
{
"NDCCode": "70512-844-25",
"PackageDescription": "25 VIAL in 1 CARTON (70512-844-25) / 2 mL in 1 VIAL (70512-844-01) ",
"NDC11Code": "70512-0844-25",
"ProductNDC": "70512-844",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20241022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217789",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241022",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS).Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.",
"Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) of ketorolac tromethamine in sterile solution. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, and 4.35 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color."
},
{
"NDCCode": "82461-550-57",
"PackageDescription": "1 KIT in 1 KIT (82461-550-57) * 1 BOTTLE in 1 CARTON (70512-038-05) > 150 mL in 1 BOTTLE * 1 TUBE in 1 CARTON (0536-2525-25) > 60 g in 1 TUBE",
"NDC11Code": "82461-0550-57",
"ProductNDC": "82461-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ziclocin",
"NonProprietaryName": "Diclofenac Sodium, Capsaicin Cream",
"DosageFormName": "KIT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220713",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Medcore LLC",
"Status": "Deprecated",
"LastUpdate": "2022-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220713",
"SamplePackage": "N"
},
{
"NDCCode": "46708-842-25",
"PackageDescription": "25 kg in 1 DRUM (46708-842-25)",
"NDC11Code": "46708-0842-25",
"ProductNDC": "46708-842",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Darifenacin Hydrobromide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20191113",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DARIFENACIN HYDROBROMIDE",
"StrengthNumber": "25",
"StrengthUnit": "kg/25kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "49349-842-52",
"PackageDescription": "25 mL in 1 TRAY (49349-842-52)",
"NDC11Code": "49349-0842-52",
"ProductNDC": "49349-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20131119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075689",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "HALOPERIDOL LACTATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "54864-842-15",
"PackageDescription": "25 kg in 1 DRUM (54864-842-15)",
"NDC11Code": "54864-0842-15",
"ProductNDC": "54864-842",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Osimertinib",
"DosageFormName": "POWDER",
"StartMarketingDate": "20151113",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "DOTTIKON EXCLUSIVE SYNTHESIS AG",
"SubstanceName": "OSIMERTINIB",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "54864-842-62",
"PackageDescription": "25 kg in 1 DRUM (54864-842-62)",
"NDC11Code": "54864-0842-62",
"ProductNDC": "54864-842",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Osimertinib",
"DosageFormName": "POWDER",
"StartMarketingDate": "20151113",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "DOTTIKON EXCLUSIVE SYNTHESIS AG",
"SubstanceName": "OSIMERTINIB",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "68084-842-25",
"PackageDescription": "30 BLISTER PACK in 1 BOX (68084-842-25) > 1 TABLET, FILM COATED in 1 BLISTER PACK (68084-842-95) ",
"NDC11Code": "68084-0842-25",
"ProductNDC": "68084-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Perphenazine",
"NonProprietaryName": "Perphenazine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141008",
"EndMarketingDate": "20190531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040226",
"LabelerName": "American Health Packaging",
"SubstanceName": "PERPHENAZINE",
"StrengthNumber": "16",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20151016",
"EndMarketingDatePackage": "20190531",
"SamplePackage": "N"
},
{
"NDCCode": "70512-030-30",
"PackageDescription": "1 TUBE in 1 CARTON (70512-030-30) > 30 g in 1 TUBE",
"NDC11Code": "70512-0030-30",
"ProductNDC": "70512-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine And Prilocaine Cream",
"NonProprietaryName": "Lidocaine And Prilocaine Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205887",
"LabelerName": "SOLA Pharmaceuticals",
"SubstanceName": "LIDOCAINE; PRILOCAINE",
"StrengthNumber": "25; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190204",
"SamplePackage": "N"
},
{
"NDCCode": "70512-797-24",
"PackageDescription": "24 BAG in 1 CARTON (70512-797-24) / 100 mL in 1 BAG (70512-797-01) ",
"NDC11Code": "70512-0797-24",
"ProductNDC": "70512-797",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212808",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHCl M.W. 310.87. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.0 mg, 5.0 mg and 10 mg of ropivacaine hydrochloride (equivalent to 2.1 mg, 5.3 mg, 10.6 mg ropivacaine hydrochloride monohydrate), and 8.6 mg, 8.0 mg and 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70512-798-24",
"PackageDescription": "24 BAG in 1 CARTON (70512-798-24) / 200 mL in 1 BAG (70512-798-01) ",
"NDC11Code": "70512-0798-24",
"ProductNDC": "70512-798",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20241201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212808",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHCl M.W. 310.87. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.0 mg, 5.0 mg and 10 mg of ropivacaine hydrochloride (equivalent to 2.1 mg, 5.3 mg, 10.6 mg ropivacaine hydrochloride monohydrate), and 8.6 mg, 8.0 mg and 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "70512-865-02",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (70512-865-02) / 2 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "70512-0865-02",
"ProductNDC": "70512-865",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215183",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240601",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10%, is indicated to dilate the pupil.",
"Description": "Phenylephrine Hydrochloride Ophthalmic Solution, USP is a sterile, clear, colorless, topical - adrenergic agonist for ophthalmic use. The active ingredient is represented by the chemical structure. Chemical Name: (R)-3-hydroxy- [(methylamino)methyl]benzenemethanol hydrochloride. Molecular Formula: C 9H 13NO 2.HCl Molecular Weight: 203.67 g/mol. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% contains: ACTIVE: Phenylephrine Hydrochloride 25 mg (2.5%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 340 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%). Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: Phenylephrine Hydrochloride 100 mg (10%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 985 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%)."
},
{
"NDCCode": "70512-865-15",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (70512-865-15) / 15 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "70512-0865-15",
"ProductNDC": "70512-865",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215183",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240601",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10%, is indicated to dilate the pupil.",
"Description": "Phenylephrine Hydrochloride Ophthalmic Solution, USP is a sterile, clear, colorless, topical - adrenergic agonist for ophthalmic use. The active ingredient is represented by the chemical structure. Chemical Name: (R)-3-hydroxy- [(methylamino)methyl]benzenemethanol hydrochloride. Molecular Formula: C 9H 13NO 2.HCl Molecular Weight: 203.67 g/mol. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% contains: ACTIVE: Phenylephrine Hydrochloride 25 mg (2.5%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 340 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%). Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: Phenylephrine Hydrochloride 100 mg (10%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 985 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%)."
},
{
"NDCCode": "70512-866-05",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (70512-866-05) / 5 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "70512-0866-05",
"ProductNDC": "70512-866",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenylephrine Hydrochloride",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215183",
"LabelerName": "SOLA Pharmaceuticals, LLC",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240601",
"SamplePackage": "N",
"IndicationAndUsage": "Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10%, is indicated to dilate the pupil.",
"Description": "Phenylephrine Hydrochloride Ophthalmic Solution, USP is a sterile, clear, colorless, topical - adrenergic agonist for ophthalmic use. The active ingredient is represented by the chemical structure. Chemical Name: (R)-3-hydroxy- [(methylamino)methyl]benzenemethanol hydrochloride. Molecular Formula: C 9H 13NO 2.HCl Molecular Weight: 203.67 g/mol. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% contains: ACTIVE: Phenylephrine Hydrochloride 25 mg (2.5%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 340 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%). Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: Phenylephrine Hydrochloride 100 mg (10%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 985 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%)."
},
{
"NDCCode": "11071-842-01",
"PackageDescription": "30000 TABLET, FILM COATED in 1 DRUM (11071-842-01) ",
"NDC11Code": "11071-0842-01",
"ProductNDC": "11071-842",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"StartMarketingDate": "19961125",
"EndMarketingDate": "20221231",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Eisai Co., Ltd.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "25-NOV-96",
"EndMarketingDatePackage": "31-DEC-22"
},
{
"NDCCode": "16714-842-01",
"PackageDescription": "60 CAPSULE in 1 BOTTLE, PLASTIC (16714-842-01) ",
"NDC11Code": "16714-0842-01",
"ProductNDC": "16714-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dofetilide",
"NonProprietaryName": "Dofetilide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180618",
"EndMarketingDate": "20240630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207058",
"LabelerName": "Northstar Rx LLC",
"SubstanceName": "DOFETILIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiarrhythmic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180618",
"EndMarketingDatePackage": "20240630",
"SamplePackage": "N",
"IndicationAndUsage": "Dofetilide capsules are indicated for the maintenance of normal sinus rhythm (delay in time to recurrence of atrial fibrillation/atrial flutter [AF/AFl]) in patients with atrial fibrillation/atrial flutter of greater than one week duration who have been converted to normal sinus rhythm. Because dofetilide capsules can cause life threatening ventricular arrhythmias, it should be reserved for patients in whom atrial fibrillation/atrial flutter is highly symptomatic. In general, antiarrhythmic therapy for atrial fibrillation/atrial flutter aims to prolong the time in normal sinus rhythm. Recurrence is expected in some patients (see CLINICAL STUDIES).",
"Description": "Dofetilide capsules are an antiarrhythmic drug with Class III (cardiac action potential duration prolonging) properties. Its empirical formula is C 19H 27N 3O 5S 2and it has a molecular weight of 441.6. The structural formula is. The chemical name for dofetilide is: N-[4-[2-[methyl[2-[4-[(methylsulfonyl)amino]phenoxy]ethyl]amino]ethyl]phenyl]methanesulfonamide. Dofetilide is a white to off-white powder. It is very slightly soluble in water and propan-2-ol and is soluble in 0.1M aqueous sodium hydroxide, acetone, and aqueous 0.1M hydrochloric acid. Dofetilide capsules contain the following inactive ingredients: microcrystalline cellulose, corn starch, colloidal silicon dioxide and magnesium stearate. The capsule shells contain gelatin, titanium dioxide, red iron oxide, yellow iron oxide, and black ink. The imprint ink contains iron oxide black, shellac, ethanol, n-butyl alcohol, isopropyl alcohol, propylene glycol, and ammonium hydroxide. Dofetilide capsules are supplied for oral administration in three dosage strengths: 125 mcg (0.125 mg) dark caramel and white capsules, 250 mcg (0.25 mg) light orange capsules, and 500 mcg (0.5 mg) light orange and white capsules."
},
{
"NDCCode": "31722-842-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (31722-842-30) ",
"NDC11Code": "31722-0842-30",
"ProductNDC": "31722-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eltrombopag",
"NonProprietaryName": "Eltrombopag",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206788",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "ELTROMBOPAG OLAMINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250513",
"SamplePackage": "N",
"IndicationAndUsage": "Eltrombopag tablet is a thrombopoietin receptor agonist indicated: for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1) for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2) in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3) for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3) Limitations of Use: Eltrombopag tablets are not indicated for the treatment of patients with myelodysplastic syndrome (MDS). (1.4) Safety and efficacy have not been established in combination with direct-acting antiviral agents used without interferon for treatment of chronic hepatitis C infection. (1.4).",
"Description": "Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid, ethanolamine. It has the molecular formula C 25H 22N 4O 4.C 4H 14N 2O 2. The molecular weight is 564.27 g/mol for eltrombopag olamine and 442.5 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula:. Eltrombopag olamine is very slightly soluble in methanol and dimethyl formamide. Eltrombopag tablets contain eltrombopag olamine in the amount equivalent to 12.5 mg, 25 mg, 50 mg, or 75 mg of eltrombopag free acid. The inactive ingredients of eltrombopag tablets are:. Tablet Core:magnesium stearate, mannitol, microcrystalline cellulose, povidone and sodium starch glycolate. Coating:FD&C Blue #2/Indigo carmine aluminum lake (for 25 mg), FD&C Yellow # 6/Sunset Yellow FCF Aluminum lake (for 25 mg), hypromellose, iron oxide yellow (for 75 mg), polyethylene glycol, polysorbate 80 (for 12.5 mg and 75 mg) and titanium dioxide."
},
{
"NDCCode": "42291-842-50",
"PackageDescription": "500 TABLET in 1 BOTTLE (42291-842-50) ",
"NDC11Code": "42291-0842-50",
"ProductNDC": "42291-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamterene And Hydrochlorothiazide",
"NonProprietaryName": "Triamterene And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071251",
"LabelerName": "AvKARE",
"SubstanceName": "HYDROCHLOROTHIAZIDE; TRIAMTERENE",
"StrengthNumber": "25; 37.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Decreased Renal K+ Excretion [PE], Increased Diuresis [PE], Increased Diuresis [PE], Potassium-sparing Diuretic [EPC], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20141014",
"SamplePackage": "N"
},
{
"NDCCode": "52427-842-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (52427-842-01) / 100 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "52427-0842-01",
"ProductNDC": "52427-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Stalevo",
"NonProprietaryName": "Carbidopa, Levodopa, And Entacapone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20201005",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021485",
"LabelerName": "Almatica Pharma LLC",
"SubstanceName": "CARBIDOPA; ENTACAPONE; LEVODOPA",
"StrengthNumber": "50; 200; 200",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20201005",
"SamplePackage": "N",
"IndicationAndUsage": "Stalevo is indicated for the treatment of Parkinson's disease. Stalevo can be used: : 1 To substitute (with equivalent strengths of each of the three components) carbidopa/levodopa and entacapone previously administered as individual products., 2 To replace carbidopa/levodopa therapy (without entacapone) when patients experience the signs and symptoms of end-of-dose \"wearing-off\" and when they have been taking a total daily dose of levodopa of 600 mg or less and have not been experiencing dyskinesias. .",
"Description": "Stalevo is a combination of carbidopa, levodopa, and entacapone for the treatment of Parkinson's disease. Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (-)-L-(α-hydrazino-(α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C10H14N2O4∙H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.3. Levodopa, an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.2. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Entacapone, a COMT inhibitor, is a nitro-catechol-structured compound with a molecular weight of 305.3. The chemical name of entacapone is (E)-2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-2-propenamide. Its empirical formula is C14H15N3O5 and its structural formula is. Stalevo is supplied as tablets in 6 strengths:. Stalevo 50:12.5 mg of carbidopa, 50 mg of levodopa and 200 mg of entacapone. Stalevo 75: 18.75 mg of carbidopa, 75 mg of levodopa and 200 mg of entacapone. Stalevo 100: 25 mg of carbidopa, 100 mg of levodopa and 200 mg of entacapone. Stalevo125: 31.25 mg of carbidopa, 125 mg of levodopa and 200 mg of entacapone. Stalevo 150: 37.5 mg of carbidopa, 150 mg of levodopa and 200 mg of entacapone. Stalevo 200: 50 mg of carbidopa, 200 mg of levodopa and 200 mg of entacapone. Inactive Ingredients: corn starch, croscarmellose sodium, glycerol 85%, hypromellose, magnesium stearate, mannitol, polysorbate 80, povidone, sucrose, red iron oxide, and titanium dioxide. Stalevo 50, Stalevo 100, and Stalevo 150 also contain yellow iron oxide."
},
{
"NDCCode": "60760-842-30",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (60760-842-30) ",
"NDC11Code": "60760-0842-30",
"ProductNDC": "60760-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084657",
"LabelerName": "St. Mary's Medical Park Pharmacy",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220727",
"SamplePackage": "N",
"IndicationAndUsage": "Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.",
"Description": "Meclizine hydrochloride USP, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets USP contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, hydrogenated vegetable oil, sodium starch glycolate, and magnesium stearate. The 12.5 mg tablets also contain: FD&C Blue # 1 aluminum lake. The 25 mg tablets also contain: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base."
},
{
"NDCCode": "61919-842-14",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (61919-842-14) ",
"NDC11Code": "61919-0842-14",
"ProductNDC": "61919-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrofurantoin Macrocrystals",
"NonProprietaryName": "Nitrofurantoin Macrocrystals",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217272",
"LabelerName": "Direct_Rx",
"SubstanceName": "NITROFURANTOIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrofuran Antibacterial [EPC], Nitrofurans [CS]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240207",
"SamplePackage": "N",
"IndicationAndUsage": "Nitrofurantoin capsules (macrocrystals) are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin capsules (macrocrystals) and other antibacterial drugs, nitrofurantoin capsules (macrocrystals) should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin capsules (macrocrystals) are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin capsules (macrocrystals), other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin capsules (macrocrystals), lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.",
"Description": "Nitrofurantoin capsules, USP (macrocrystals) are a synthetic chemical of controlled crystal size. It is a stable, lemon yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) are an antibacterial agent for specific urinary tract infections. It is available in 25 mg, 50 mg, and 100 mg capsules for oral administration. Each capsule contains 25 mg, 50 mg, or 100 mg of nitrofurantoin, USP (macrocrystals). [structure]. Molecular Formula: C8H6N4O5 Molecular Weight: 238.16 g/mole. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Inactive Ingredients: Each capsule contains: corn starch, gelatin, lactose monohydrate, talc and titanium dioxide. Additionally, each 50 mg and 100 mg capsule shell contains FD&C Blue no. 1 and FD&C Red no. 3. The capsule is printed with black pharmaceutical ink which contains ferrosoferric oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "61919-842-20",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (61919-842-20) ",
"NDC11Code": "61919-0842-20",
"ProductNDC": "61919-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrofurantoin Macrocrystals",
"NonProprietaryName": "Nitrofurantoin Macrocrystals",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217272",
"LabelerName": "Direct_Rx",
"SubstanceName": "NITROFURANTOIN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrofuran Antibacterial [EPC], Nitrofurans [CS]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240207",
"SamplePackage": "N",
"IndicationAndUsage": "Nitrofurantoin capsules (macrocrystals) are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin capsules (macrocrystals) and other antibacterial drugs, nitrofurantoin capsules (macrocrystals) should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin capsules (macrocrystals) are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin capsules (macrocrystals), other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin capsules (macrocrystals), lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.",
"Description": "Nitrofurantoin capsules, USP (macrocrystals) are a synthetic chemical of controlled crystal size. It is a stable, lemon yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) are an antibacterial agent for specific urinary tract infections. It is available in 25 mg, 50 mg, and 100 mg capsules for oral administration. Each capsule contains 25 mg, 50 mg, or 100 mg of nitrofurantoin, USP (macrocrystals). [structure]. Molecular Formula: C8H6N4O5 Molecular Weight: 238.16 g/mole. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Inactive Ingredients: Each capsule contains: corn starch, gelatin, lactose monohydrate, talc and titanium dioxide. Additionally, each 50 mg and 100 mg capsule shell contains FD&C Blue no. 1 and FD&C Red no. 3. The capsule is printed with black pharmaceutical ink which contains ferrosoferric oxide, potassium hydroxide, and shellac."
},
{
"NDCCode": "62559-842-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (62559-842-01) ",
"NDC11Code": "62559-0842-01",
"ProductNDC": "62559-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211227",
"EndMarketingDate": "20241031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084657",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211227",
"EndMarketingDatePackage": "20240831",
"SamplePackage": "N",
"IndicationAndUsage": "Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.",
"Description": "Meclizine hydrochloride USP, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets USP contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, hydrogenated vegetable oil, sodium starch glycolate, and magnesium stearate. The 12.5 mg tablets also contain: FD&C Blue # 1 aluminum lake. The 25 mg tablets also contain: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base."
},
{
"NDCCode": "62559-842-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (62559-842-10) ",
"NDC11Code": "62559-0842-10",
"ProductNDC": "62559-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211227",
"EndMarketingDate": "20241031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084657",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211227",
"EndMarketingDatePackage": "20241031",
"SamplePackage": "N",
"IndicationAndUsage": "Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.",
"Description": "Meclizine hydrochloride USP, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets USP contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, hydrogenated vegetable oil, sodium starch glycolate, and magnesium stearate. The 12.5 mg tablets also contain: FD&C Blue # 1 aluminum lake. The 25 mg tablets also contain: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base."
},
{
"NDCCode": "64850-842-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (64850-842-01) ",
"NDC11Code": "64850-0842-01",
"ProductNDC": "64850-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dantrolene Sodium",
"NonProprietaryName": "Dantrolene Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20051026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076686",
"LabelerName": "Elite Laboratories, Inc.",
"SubstanceName": "DANTROLENE SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051026",
"SamplePackage": "N",
"IndicationAndUsage": "Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsules therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen. produces a significant reduction in painful and/or disabling spasticity such as clonus, or. permits a significant reduction in the intensity and/or degree of nursing care required, or. rids the patient of any annoying manifestation of spasticity considered important by the patient himself.",
"Description": "The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene]amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene Sodium is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains corn starch, lactose monohydrate, magnesium stearate, and talc. The capsule shell contains the following ingredients, D&C Yellow #10, FD&C Red #40, gelatin, titanium dioxide, and yellow iron oxide. Black ink contains the following ingredients, D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Blue #2 Aluminum lake, FD&C Red #40 Aluminum lake, n-Butyl alcohol, pharmaceutical glaze (modified) in SD-45, propylene glycol, SDA-3A alcohol and synthetic black iron oxide."
},
{
"NDCCode": "65862-842-30",
"PackageDescription": "1 BOTTLE in 1 CARTON (65862-842-30) / 30 TABLET in 1 BOTTLE",
"NDC11Code": "65862-0842-30",
"ProductNDC": "65862-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206217",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ENTECAVIR",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150826",
"SamplePackage": "N",
"IndicationAndUsage": "Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir USP is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25°C ± 0.5°C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir USP. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "65862-842-90",
"PackageDescription": "1 BOTTLE in 1 CARTON (65862-842-90) / 90 TABLET in 1 BOTTLE",
"NDC11Code": "65862-0842-90",
"ProductNDC": "65862-842",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206217",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ENTECAVIR",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150826",
"SamplePackage": "N",
"IndicationAndUsage": "Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.",
"Description": "Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir USP is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25°C ± 0.5°C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir USP. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Meets USP Dissolution Test 2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70512-842-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70512-842-25) / 1 mL in 1 VIAL (70512-842-01) </PackageDescription>
<NDC11Code>70512-0842-25</NDC11Code>
<ProductNDC>70512-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217789</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS).Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) of ketorolac tromethamine in sterile solution. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, and 4.35 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>70512-840-25</NDCCode>
<PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (70512-840-25) / 1 mL in 1 VIAL, MULTI-DOSE (70512-840-01) </PackageDescription>
<NDC11Code>70512-0840-25</NDC11Code>
<ProductNDC>70512-840</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyanocobalamin</ProprietaryName>
<NonProprietaryName>Cyanocobalamin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20220803</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215417</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals</LabelerName>
<SubstanceName>CYANOCOBALAMIN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug Interactions ), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue.Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin Injection, USP is also suitable for the vitamin B12 absorption test (Schilling test).</IndicationAndUsage>
<Description>Cyanocobalamin Injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.9%. Benzyl Alcohol, 1.5%, is present as a preservative. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). It is stable to autoclaving for short periods at 121°C. The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>70512-841-26</NDCCode>
<PackageDescription>28 BAG in 1 CARTON (70512-841-26) / 250 mL in 1 BAG (70512-841-25) </PackageDescription>
<NDC11Code>70512-0841-26</NDC11Code>
<ProductNDC>70512-841</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207956</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.</IndicationAndUsage>
<Description>Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The pH ranges from 4.5 to 7.0. Composition, osmolarity, and ionic concentration are shown below. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The FLEBOFLEX and FLEBOFLEX LUER plastic containers are fabricated from latex-free polyolefins or polypropylene plastic materials. The solution contact materials do not contain PVC, DEHP, or other plasticizers. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. The suitability of the container materials has been established through biological evaluations, which have shown the containers pass Class VI U.S. Pharmacopeia (USP) testing for plastic containers. These tests confirm the biological safety of the container systems.</Description>
</NDC>
<NDC>
<NDCCode>70512-843-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70512-843-25) / 1 mL in 1 VIAL (70512-843-01) </PackageDescription>
<NDC11Code>70512-0843-25</NDC11Code>
<ProductNDC>70512-843</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217789</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS).Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) of ketorolac tromethamine in sterile solution. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, and 4.35 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>70512-844-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70512-844-25) / 2 mL in 1 VIAL (70512-844-01) </PackageDescription>
<NDC11Code>70512-0844-25</NDC11Code>
<ProductNDC>70512-844</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20241022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217789</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS).Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) of ketorolac tromethamine in sterile solution. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, and 4.35 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>82461-550-57</NDCCode>
<PackageDescription>1 KIT in 1 KIT (82461-550-57) * 1 BOTTLE in 1 CARTON (70512-038-05) > 150 mL in 1 BOTTLE * 1 TUBE in 1 CARTON (0536-2525-25) > 60 g in 1 TUBE</PackageDescription>
<NDC11Code>82461-0550-57</NDC11Code>
<ProductNDC>82461-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ziclocin</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium, Capsaicin Cream</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220713</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Medcore LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2022-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>46708-842-25</NDCCode>
<PackageDescription>25 kg in 1 DRUM (46708-842-25)</PackageDescription>
<NDC11Code>46708-0842-25</NDC11Code>
<ProductNDC>46708-842</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Darifenacin Hydrobromide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20191113</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DARIFENACIN HYDROBROMIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>kg/25kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>49349-842-52</NDCCode>
<PackageDescription>25 mL in 1 TRAY (49349-842-52)</PackageDescription>
<NDC11Code>49349-0842-52</NDC11Code>
<ProductNDC>49349-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20131119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075689</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>HALOPERIDOL LACTATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>54864-842-15</NDCCode>
<PackageDescription>25 kg in 1 DRUM (54864-842-15)</PackageDescription>
<NDC11Code>54864-0842-15</NDC11Code>
<ProductNDC>54864-842</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Osimertinib</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20151113</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>DOTTIKON EXCLUSIVE SYNTHESIS AG</LabelerName>
<SubstanceName>OSIMERTINIB</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54864-842-62</NDCCode>
<PackageDescription>25 kg in 1 DRUM (54864-842-62)</PackageDescription>
<NDC11Code>54864-0842-62</NDC11Code>
<ProductNDC>54864-842</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Osimertinib</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20151113</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>DOTTIKON EXCLUSIVE SYNTHESIS AG</LabelerName>
<SubstanceName>OSIMERTINIB</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68084-842-25</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 BOX (68084-842-25) > 1 TABLET, FILM COATED in 1 BLISTER PACK (68084-842-95) </PackageDescription>
<NDC11Code>68084-0842-25</NDC11Code>
<ProductNDC>68084-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Perphenazine</ProprietaryName>
<NonProprietaryName>Perphenazine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141008</StartMarketingDate>
<EndMarketingDate>20190531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040226</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>PERPHENAZINE</SubstanceName>
<StrengthNumber>16</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20151016</StartMarketingDatePackage>
<EndMarketingDatePackage>20190531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70512-030-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (70512-030-30) > 30 g in 1 TUBE</PackageDescription>
<NDC11Code>70512-0030-30</NDC11Code>
<ProductNDC>70512-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine And Prilocaine Cream</ProprietaryName>
<NonProprietaryName>Lidocaine And Prilocaine Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205887</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals</LabelerName>
<SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
<StrengthNumber>25; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70512-797-24</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (70512-797-24) / 100 mL in 1 BAG (70512-797-01) </PackageDescription>
<NDC11Code>70512-0797-24</NDC11Code>
<ProductNDC>70512-797</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212808</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHCl M.W. 310.87. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.0 mg, 5.0 mg and 10 mg of ropivacaine hydrochloride (equivalent to 2.1 mg, 5.3 mg, 10.6 mg ropivacaine hydrochloride monohydrate), and 8.6 mg, 8.0 mg and 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70512-798-24</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (70512-798-24) / 200 mL in 1 BAG (70512-798-01) </PackageDescription>
<NDC11Code>70512-0798-24</NDC11Code>
<ProductNDC>70512-798</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20241201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212808</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHCl M.W. 310.87. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.0 mg, 5.0 mg and 10 mg of ropivacaine hydrochloride (equivalent to 2.1 mg, 5.3 mg, 10.6 mg ropivacaine hydrochloride monohydrate), and 8.6 mg, 8.0 mg and 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of ropivacaine hydrochloride injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>70512-865-02</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (70512-865-02) / 2 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>70512-0865-02</NDC11Code>
<ProductNDC>70512-865</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215183</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10%, is indicated to dilate the pupil.</IndicationAndUsage>
<Description>Phenylephrine Hydrochloride Ophthalmic Solution, USP is a sterile, clear, colorless, topical - adrenergic agonist for ophthalmic use. The active ingredient is represented by the chemical structure. Chemical Name: (R)-3-hydroxy- [(methylamino)methyl]benzenemethanol hydrochloride. Molecular Formula: C 9H 13NO 2.HCl Molecular Weight: 203.67 g/mol. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% contains: ACTIVE: Phenylephrine Hydrochloride 25 mg (2.5%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 340 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%). Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: Phenylephrine Hydrochloride 100 mg (10%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 985 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%).</Description>
</NDC>
<NDC>
<NDCCode>70512-865-15</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (70512-865-15) / 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>70512-0865-15</NDC11Code>
<ProductNDC>70512-865</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215183</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10%, is indicated to dilate the pupil.</IndicationAndUsage>
<Description>Phenylephrine Hydrochloride Ophthalmic Solution, USP is a sterile, clear, colorless, topical - adrenergic agonist for ophthalmic use. The active ingredient is represented by the chemical structure. Chemical Name: (R)-3-hydroxy- [(methylamino)methyl]benzenemethanol hydrochloride. Molecular Formula: C 9H 13NO 2.HCl Molecular Weight: 203.67 g/mol. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% contains: ACTIVE: Phenylephrine Hydrochloride 25 mg (2.5%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 340 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%). Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: Phenylephrine Hydrochloride 100 mg (10%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 985 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%).</Description>
</NDC>
<NDC>
<NDCCode>70512-866-05</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (70512-866-05) / 5 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>70512-0866-05</NDC11Code>
<ProductNDC>70512-866</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenylephrine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215183</ApplicationNumber>
<LabelerName>SOLA Pharmaceuticals, LLC</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% and 10%, is indicated to dilate the pupil.</IndicationAndUsage>
<Description>Phenylephrine Hydrochloride Ophthalmic Solution, USP is a sterile, clear, colorless, topical - adrenergic agonist for ophthalmic use. The active ingredient is represented by the chemical structure. Chemical Name: (R)-3-hydroxy- [(methylamino)methyl]benzenemethanol hydrochloride. Molecular Formula: C 9H 13NO 2.HCl Molecular Weight: 203.67 g/mol. Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 2.5% contains: ACTIVE: Phenylephrine Hydrochloride 25 mg (2.5%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 340 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%). Each mL of Phenylephrine Hydrochloride Ophthalmic Solution, USP 10% contains: ACTIVE: Phenylephrine Hydrochloride 100 mg (10%); INACTIVES: Sodium Phosphate Dibasic, Sodium Phosphate Monobasic, Water for Injection. Phosphoric Acid and/or Sodium Hydroxide may be added to adjust pH (4.0 to 7.5). The solution has a tonicity of 985 mOsm/kg; PRESERVATIVE: Benzalkonium Chloride 0.1 mg (0.01%).</Description>
</NDC>
<NDC>
<NDCCode>11071-842-01</NDCCode>
<PackageDescription>30000 TABLET, FILM COATED in 1 DRUM (11071-842-01) </PackageDescription>
<NDC11Code>11071-0842-01</NDC11Code>
<ProductNDC>11071-842</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<StartMarketingDate>19961125</StartMarketingDate>
<EndMarketingDate>20221231</EndMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Eisai Co., Ltd.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>25-NOV-96</StartMarketingDatePackage>
<EndMarketingDatePackage>31-DEC-22</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>16714-842-01</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE, PLASTIC (16714-842-01) </PackageDescription>
<NDC11Code>16714-0842-01</NDC11Code>
<ProductNDC>16714-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dofetilide</ProprietaryName>
<NonProprietaryName>Dofetilide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180618</StartMarketingDate>
<EndMarketingDate>20240630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207058</ApplicationNumber>
<LabelerName>Northstar Rx LLC</LabelerName>
<SubstanceName>DOFETILIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180618</StartMarketingDatePackage>
<EndMarketingDatePackage>20240630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dofetilide capsules are indicated for the maintenance of normal sinus rhythm (delay in time to recurrence of atrial fibrillation/atrial flutter [AF/AFl]) in patients with atrial fibrillation/atrial flutter of greater than one week duration who have been converted to normal sinus rhythm. Because dofetilide capsules can cause life threatening ventricular arrhythmias, it should be reserved for patients in whom atrial fibrillation/atrial flutter is highly symptomatic. In general, antiarrhythmic therapy for atrial fibrillation/atrial flutter aims to prolong the time in normal sinus rhythm. Recurrence is expected in some patients (see CLINICAL STUDIES).</IndicationAndUsage>
<Description>Dofetilide capsules are an antiarrhythmic drug with Class III (cardiac action potential duration prolonging) properties. Its empirical formula is C 19H 27N 3O 5S 2and it has a molecular weight of 441.6. The structural formula is. The chemical name for dofetilide is: N-[4-[2-[methyl[2-[4-[(methylsulfonyl)amino]phenoxy]ethyl]amino]ethyl]phenyl]methanesulfonamide. Dofetilide is a white to off-white powder. It is very slightly soluble in water and propan-2-ol and is soluble in 0.1M aqueous sodium hydroxide, acetone, and aqueous 0.1M hydrochloric acid. Dofetilide capsules contain the following inactive ingredients: microcrystalline cellulose, corn starch, colloidal silicon dioxide and magnesium stearate. The capsule shells contain gelatin, titanium dioxide, red iron oxide, yellow iron oxide, and black ink. The imprint ink contains iron oxide black, shellac, ethanol, n-butyl alcohol, isopropyl alcohol, propylene glycol, and ammonium hydroxide. Dofetilide capsules are supplied for oral administration in three dosage strengths: 125 mcg (0.125 mg) dark caramel and white capsules, 250 mcg (0.25 mg) light orange capsules, and 500 mcg (0.5 mg) light orange and white capsules.</Description>
</NDC>
<NDC>
<NDCCode>31722-842-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (31722-842-30) </PackageDescription>
<NDC11Code>31722-0842-30</NDC11Code>
<ProductNDC>31722-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eltrombopag</ProprietaryName>
<NonProprietaryName>Eltrombopag</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206788</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ELTROMBOPAG OLAMINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eltrombopag tablet is a thrombopoietin receptor agonist indicated: for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins, or splenectomy. Eltrombopag tablets should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1) for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag tablets should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2) in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3) for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3) Limitations of Use: Eltrombopag tablets are not indicated for the treatment of patients with myelodysplastic syndrome (MDS). (1.4) Safety and efficacy have not been established in combination with direct-acting antiviral agents used without interferon for treatment of chronic hepatitis C infection. (1.4).</IndicationAndUsage>
<Description>Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid, ethanolamine. It has the molecular formula C 25H 22N 4O 4.C 4H 14N 2O 2. The molecular weight is 564.27 g/mol for eltrombopag olamine and 442.5 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula:. Eltrombopag olamine is very slightly soluble in methanol and dimethyl formamide. Eltrombopag tablets contain eltrombopag olamine in the amount equivalent to 12.5 mg, 25 mg, 50 mg, or 75 mg of eltrombopag free acid. The inactive ingredients of eltrombopag tablets are:. Tablet Core:magnesium stearate, mannitol, microcrystalline cellulose, povidone and sodium starch glycolate. Coating:FD&C Blue #2/Indigo carmine aluminum lake (for 25 mg), FD&C Yellow # 6/Sunset Yellow FCF Aluminum lake (for 25 mg), hypromellose, iron oxide yellow (for 75 mg), polyethylene glycol, polysorbate 80 (for 12.5 mg and 75 mg) and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42291-842-50</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (42291-842-50) </PackageDescription>
<NDC11Code>42291-0842-50</NDC11Code>
<ProductNDC>42291-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamterene And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Triamterene And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071251</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; TRIAMTERENE</SubstanceName>
<StrengthNumber>25; 37.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Decreased Renal K+ Excretion [PE], Increased Diuresis [PE], Increased Diuresis [PE], Potassium-sparing Diuretic [EPC], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>52427-842-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (52427-842-01) / 100 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>52427-0842-01</NDC11Code>
<ProductNDC>52427-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Stalevo</ProprietaryName>
<NonProprietaryName>Carbidopa, Levodopa, And Entacapone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201005</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021485</ApplicationNumber>
<LabelerName>Almatica Pharma LLC</LabelerName>
<SubstanceName>CARBIDOPA; ENTACAPONE; LEVODOPA</SubstanceName>
<StrengthNumber>50; 200; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201005</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stalevo is indicated for the treatment of Parkinson's disease. Stalevo can be used: : 1 To substitute (with equivalent strengths of each of the three components) carbidopa/levodopa and entacapone previously administered as individual products., 2 To replace carbidopa/levodopa therapy (without entacapone) when patients experience the signs and symptoms of end-of-dose "wearing-off" and when they have been taking a total daily dose of levodopa of 600 mg or less and have not been experiencing dyskinesias. .</IndicationAndUsage>
<Description>Stalevo is a combination of carbidopa, levodopa, and entacapone for the treatment of Parkinson's disease. Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (-)-L-(α-hydrazino-(α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C10H14N2O4∙H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.3. Levodopa, an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.2. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Entacapone, a COMT inhibitor, is a nitro-catechol-structured compound with a molecular weight of 305.3. The chemical name of entacapone is (E)-2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-2-propenamide. Its empirical formula is C14H15N3O5 and its structural formula is. Stalevo is supplied as tablets in 6 strengths:. Stalevo 50:12.5 mg of carbidopa, 50 mg of levodopa and 200 mg of entacapone. Stalevo 75: 18.75 mg of carbidopa, 75 mg of levodopa and 200 mg of entacapone. Stalevo 100: 25 mg of carbidopa, 100 mg of levodopa and 200 mg of entacapone. Stalevo125: 31.25 mg of carbidopa, 125 mg of levodopa and 200 mg of entacapone. Stalevo 150: 37.5 mg of carbidopa, 150 mg of levodopa and 200 mg of entacapone. Stalevo 200: 50 mg of carbidopa, 200 mg of levodopa and 200 mg of entacapone. Inactive Ingredients: corn starch, croscarmellose sodium, glycerol 85%, hypromellose, magnesium stearate, mannitol, polysorbate 80, povidone, sucrose, red iron oxide, and titanium dioxide. Stalevo 50, Stalevo 100, and Stalevo 150 also contain yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>60760-842-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (60760-842-30) </PackageDescription>
<NDC11Code>60760-0842-30</NDC11Code>
<ProductNDC>60760-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084657</ApplicationNumber>
<LabelerName>St. Mary's Medical Park Pharmacy</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.</IndicationAndUsage>
<Description>Meclizine hydrochloride USP, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets USP contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, hydrogenated vegetable oil, sodium starch glycolate, and magnesium stearate. The 12.5 mg tablets also contain: FD&C Blue # 1 aluminum lake. The 25 mg tablets also contain: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base.</Description>
</NDC>
<NDC>
<NDCCode>61919-842-14</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (61919-842-14) </PackageDescription>
<NDC11Code>61919-0842-14</NDC11Code>
<ProductNDC>61919-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrofurantoin Macrocrystals</ProprietaryName>
<NonProprietaryName>Nitrofurantoin Macrocrystals</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217272</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>NITROFURANTOIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrofuran Antibacterial [EPC], Nitrofurans [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitrofurantoin capsules (macrocrystals) are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin capsules (macrocrystals) and other antibacterial drugs, nitrofurantoin capsules (macrocrystals) should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin capsules (macrocrystals) are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin capsules (macrocrystals), other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin capsules (macrocrystals), lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.</IndicationAndUsage>
<Description>Nitrofurantoin capsules, USP (macrocrystals) are a synthetic chemical of controlled crystal size. It is a stable, lemon yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) are an antibacterial agent for specific urinary tract infections. It is available in 25 mg, 50 mg, and 100 mg capsules for oral administration. Each capsule contains 25 mg, 50 mg, or 100 mg of nitrofurantoin, USP (macrocrystals). [structure]. Molecular Formula: C8H6N4O5 Molecular Weight: 238.16 g/mole. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Inactive Ingredients: Each capsule contains: corn starch, gelatin, lactose monohydrate, talc and titanium dioxide. Additionally, each 50 mg and 100 mg capsule shell contains FD&C Blue no. 1 and FD&C Red no. 3. The capsule is printed with black pharmaceutical ink which contains ferrosoferric oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>61919-842-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (61919-842-20) </PackageDescription>
<NDC11Code>61919-0842-20</NDC11Code>
<ProductNDC>61919-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrofurantoin Macrocrystals</ProprietaryName>
<NonProprietaryName>Nitrofurantoin Macrocrystals</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217272</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>NITROFURANTOIN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrofuran Antibacterial [EPC], Nitrofurans [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitrofurantoin capsules (macrocrystals) are specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci, Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of nitrofurantoin capsules (macrocrystals) and other antibacterial drugs, nitrofurantoin capsules (macrocrystals) should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with nitrofurantoin capsules (macrocrystals) are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with nitrofurantoin capsules (macrocrystals), other therapeutic agents with broader tissue distribution should be selected. In considering the use of nitrofurantoin capsules (macrocrystals), lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.</IndicationAndUsage>
<Description>Nitrofurantoin capsules, USP (macrocrystals) are a synthetic chemical of controlled crystal size. It is a stable, lemon yellow, crystalline compound. Nitrofurantoin capsules, USP (macrocrystals) are an antibacterial agent for specific urinary tract infections. It is available in 25 mg, 50 mg, and 100 mg capsules for oral administration. Each capsule contains 25 mg, 50 mg, or 100 mg of nitrofurantoin, USP (macrocrystals). [structure]. Molecular Formula: C8H6N4O5 Molecular Weight: 238.16 g/mole. 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione. Inactive Ingredients: Each capsule contains: corn starch, gelatin, lactose monohydrate, talc and titanium dioxide. Additionally, each 50 mg and 100 mg capsule shell contains FD&C Blue no. 1 and FD&C Red no. 3. The capsule is printed with black pharmaceutical ink which contains ferrosoferric oxide, potassium hydroxide, and shellac.</Description>
</NDC>
<NDC>
<NDCCode>62559-842-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (62559-842-01) </PackageDescription>
<NDC11Code>62559-0842-01</NDC11Code>
<ProductNDC>62559-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211227</StartMarketingDate>
<EndMarketingDate>20241031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084657</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211227</StartMarketingDatePackage>
<EndMarketingDatePackage>20240831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.</IndicationAndUsage>
<Description>Meclizine hydrochloride USP, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets USP contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, hydrogenated vegetable oil, sodium starch glycolate, and magnesium stearate. The 12.5 mg tablets also contain: FD&C Blue # 1 aluminum lake. The 25 mg tablets also contain: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base.</Description>
</NDC>
<NDC>
<NDCCode>62559-842-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (62559-842-10) </PackageDescription>
<NDC11Code>62559-0842-10</NDC11Code>
<ProductNDC>62559-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211227</StartMarketingDate>
<EndMarketingDate>20241031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084657</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211227</StartMarketingDatePackage>
<EndMarketingDatePackage>20241031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.</IndicationAndUsage>
<Description>Meclizine hydrochloride USP, a histamine (H1) receptor antagonist, is a white or slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Meclizine Hydrochloride Tablets USP contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, hydrogenated vegetable oil, sodium starch glycolate, and magnesium stearate. The 12.5 mg tablets also contain: FD&C Blue # 1 aluminum lake. The 25 mg tablets also contain: D&C Yellow # 10 aluminum lake and FD&C Yellow # 6 aluminum lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base.</Description>
</NDC>
<NDC>
<NDCCode>64850-842-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (64850-842-01) </PackageDescription>
<NDC11Code>64850-0842-01</NDC11Code>
<ProductNDC>64850-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dantrolene Sodium</ProprietaryName>
<NonProprietaryName>Dantrolene Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076686</ApplicationNumber>
<LabelerName>Elite Laboratories, Inc.</LabelerName>
<SubstanceName>DANTROLENE SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsules therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen. produces a significant reduction in painful and/or disabling spasticity such as clonus, or. permits a significant reduction in the intensity and/or degree of nursing care required, or. rids the patient of any annoying manifestation of spasticity considered important by the patient himself.</IndicationAndUsage>
<Description>The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene]amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene Sodium is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains corn starch, lactose monohydrate, magnesium stearate, and talc. The capsule shell contains the following ingredients, D&C Yellow #10, FD&C Red #40, gelatin, titanium dioxide, and yellow iron oxide. Black ink contains the following ingredients, D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Blue #2 Aluminum lake, FD&C Red #40 Aluminum lake, n-Butyl alcohol, pharmaceutical glaze (modified) in SD-45, propylene glycol, SDA-3A alcohol and synthetic black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>65862-842-30</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65862-842-30) / 30 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>65862-0842-30</NDC11Code>
<ProductNDC>65862-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206217</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ENTECAVIR</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir USP is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25°C ± 0.5°C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir USP. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>65862-842-90</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (65862-842-90) / 90 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>65862-0842-90</NDC11Code>
<ProductNDC>65862-842</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206217</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ENTECAVIR</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Analog [EXT], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Entecavir tablets are indicated for the treatment of chronic hepatitis B virus infection in adults and pediatric patients 2 years of age and older with evidence of active viral replication and either evidence of persistent elevations in serum aminotransferases (ALT or AST) or histologically active disease.</IndicationAndUsage>
<Description>Entecavir is a guanosine nucleoside analogue with selective activity against HBV. The chemical name for entecavir is 2-amino-1,9-dihydro-9-[(1S,3R,4S)-4-hydroxy-3-(hydroxymethyl)-2-methylenecyclopentyl]-6H-purin-6-one, monohydrate. Its molecular formula is C12H15N5O3H2O, which corresponds to a molecular weight of 295.3. Entecavir has the following structural formula. Entecavir USP is a white to off-white powder. It is slightly soluble in water (2.4 mg/mL), and the pH of the saturated solution in water is 7.9 at 25°C ± 0.5°C. Entecavir film-coated tablets are available for oral administration in strengths of 0.5 mg and 1 mg of entecavir USP. Entecavir 0.5 mg and 1 mg film-coated tablets contain the following inactive ingredients: crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
</NDCList>