RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70518-0176-0</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0176-0) </PackageDescription>
    <NDC11Code>70518-0176-00</NDC11Code>
    <ProductNDC>70518-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen</ProprietaryName>
    <NonProprietaryName>Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170125</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091625</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>IBUPROFEN</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-04-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70518-0176-1</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0176-1) </PackageDescription>
    <NDC11Code>70518-0176-01</NDC11Code>
    <ProductNDC>70518-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen</ProprietaryName>
    <NonProprietaryName>Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170125</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091625</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>IBUPROFEN</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170324</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70518-0176-2</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70518-0176-2) </PackageDescription>
    <NDC11Code>70518-0176-02</NDC11Code>
    <ProductNDC>70518-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ibuprofen</ProprietaryName>
    <NonProprietaryName>Ibuprofen</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170125</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091625</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>IBUPROFEN</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
    <Description>Ibuprofen tablets contain the active ingredient ibuprofen, which is (±)-2-( p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74 to 77° C and is very slightly soluble in water (&lt;1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below:. Ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose 2910, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 400, pregelatinized starch, povidone k-90, sodium lauryl sulphate, titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>15631-0176-0</NDCCode>
    <PackageDescription>100 PELLET in 1 PACKAGE (15631-0176-0) </PackageDescription>
    <NDC11Code>15631-0176-00</NDC11Code>
    <ProductNDC>15631-0176</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Epigaea Repens</ProprietaryName>
    <NonProprietaryName>Epigaea Repens</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151002</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>EPIGAEA REPENS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>44224-0176-0</NDCCode>
    <PackageDescription>20 g in 1 TUBE (44224-0176-0) </PackageDescription>
    <NDC11Code>44224-0176-00</NDC11Code>
    <ProductNDC>44224-0176</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>After Bite Plus</ProprietaryName>
    <NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20180301</StartMarketingDate>
    <EndMarketingDate>20200930</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part348</ApplicationNumber>
    <LabelerName>Tender Corporation</LabelerName>
    <SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20180301</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>51927-0176-0</NDCCode>
    <PackageDescription>1 kg in 1 BOTTLE (51927-0176-0) </PackageDescription>
    <NDC11Code>51927-0176-00</NDC11Code>
    <ProductNDC>51927-0176</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Phentolamine Mesylate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20180924</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>Professional Compounding Centers of America</LabelerName>
    <SubstanceName>PHENTOLAMINE MESYLATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>24-SEP-18</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>60505-0176-0</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (60505-0176-0)</PackageDescription>
    <NDC11Code>60505-0176-00</NDC11Code>
    <ProductNDC>60505-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxaprozin</ProprietaryName>
    <NonProprietaryName>Oxaprozin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20040903</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075987</ApplicationNumber>
    <LabelerName>Apotex Corp.</LabelerName>
    <SubstanceName>OXAPROZIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-04-26</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>62147-0176-0</NDCCode>
    <PackageDescription>1 kg in 1 DRUM (62147-0176-0)</PackageDescription>
    <NDC11Code>62147-0176-00</NDC11Code>
    <ProductNDC>62147-0176</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Colesevelam Hydrochloride</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>USV Limited</LabelerName>
    <SubstanceName>COLESEVELAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0338-0176-01</NDCCode>
    <PackageDescription>30 BAG in 1 CARTON (0338-0176-01)  / 100 mL in 1 BAG</PackageDescription>
    <NDC11Code>00338-0176-01</NDC11Code>
    <ProductNDC>0338-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dextrose</ProprietaryName>
    <NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19921207</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020179</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221207</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dextrose Injection is indicated as source of water and calories and may also be used as diluent for reconstitution of a powdered or liquid (up to 10 mL) drug product packaged in a vial with a 13 mm or 20 mm closure.</IndicationAndUsage>
    <Description>Dextrose Injection, 5% USP is a clear, sterile, non-pyrogenic solution of Dextrose, USP in Water for Injection in a polyvinylchloride flexible plastic container for intravenous administration after admixture with a single dose powdered or liquid (up to 10 mL) drug vial [see Dosage and Administration (2.1)]. Flexible containers, designed to facilitate admixture, are available in 50 mL and 100 mL sizes. See Table 1 for the content and characteristics of this solution. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6  H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The Mini-Bag Plus Container System is a standard diluent container with an integral drug vial adaptor. It allows for drug admixture after connection to a single dose powdered or liquid (up to 10 mL) drug vial having a 13mm or 20mm closure. A breakaway seal in the tube between the vial adaptor and the container is broken to allow transfer of the diluent into the vial and reconstitution of a powdered or a liquid (up to 10mL) drug. The Mini-Bag Plus product mechanically prohibits the transfer of contaminants into and out of the system during and after docking, minimizing environmental and personal exposure. The reconstituted drug is then transferred from the vial into the container diluent and mixed to result in an infusion solution for delivery to the patient. The VIAFLEX Plastic Container is fabricated from a specially formulated polyvinyl chloride (PL 146 Plastic). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million. However, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
  </NDC>
  <NDC>
    <NDCCode>10544-176-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (10544-176-30)</PackageDescription>
    <NDC11Code>10544-0176-30</NDC11Code>
    <ProductNDC>10544-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20131115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll 1 as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C 21H 31N 5O 2  HCl is represented by the following structural formula:. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>10544-176-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (10544-176-90)</PackageDescription>
    <NDC11Code>10544-0176-90</NDC11Code>
    <ProductNDC>10544-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20131115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll 1 as follows:. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C 21H 31N 5O 2  HCl is represented by the following structural formula:. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>11534-176-01</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (11534-176-01) </PackageDescription>
    <NDC11Code>11534-0176-01</NDC11Code>
    <ProductNDC>11534-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205019</ApplicationNumber>
    <LabelerName>SUNRISE PHARMACEUTICAL, INC.</LabelerName>
    <SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-07-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phentermine hydrochloride capsules are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m2, or ≥ 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. BODY MASS INDEX (BMI), kg/m2. The limited usefulness of agents of this class, including phentermine, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
    <Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α, dimethylphenethylamine hydrochloride. The structural formula is as follows. C10H15NHCl                                   M.W. 185.7. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP is available as an oral capsule containing 15 mg or 30 mg of phentermine hydrochloride (equivalent to 12 mg or 24 mg of phentermine base). a) powder-filled capsules containing 15 mg phentermine hydrochloride (equivalent to 12 mg phentermine) or 30 mg phentermine hydrochloride (equivalent to 24 mg phentermine) and inactive ingredients: colloidal silicon dioxide, corn starch, gelatin, lactose monohydrate, magnesium stearate. In addition, the 15 mg capsules contain black iron oxide, FD&amp;C red No. 3, FD&amp;C yellow No. 5, titanium dioxide; and the blue and clear 30 mg capsules contain D&amp;C red No. 28, FD&amp;C blue No. 1. The ingredients in the black imprinting ink are shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>11534-176-03</NDCCode>
    <PackageDescription>1000 CAPSULE in 1 BOTTLE (11534-176-03) </PackageDescription>
    <NDC11Code>11534-0176-03</NDC11Code>
    <ProductNDC>11534-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205019</ApplicationNumber>
    <LabelerName>SUNRISE PHARMACEUTICAL, INC.</LabelerName>
    <SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-07-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Phentermine hydrochloride capsules are indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m2, or ≥ 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. BODY MASS INDEX (BMI), kg/m2. The limited usefulness of agents of this class, including phentermine, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
    <Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α, dimethylphenethylamine hydrochloride. The structural formula is as follows. C10H15NHCl                                   M.W. 185.7. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride capsule USP is available as an oral capsule containing 15 mg or 30 mg of phentermine hydrochloride (equivalent to 12 mg or 24 mg of phentermine base). a) powder-filled capsules containing 15 mg phentermine hydrochloride (equivalent to 12 mg phentermine) or 30 mg phentermine hydrochloride (equivalent to 24 mg phentermine) and inactive ingredients: colloidal silicon dioxide, corn starch, gelatin, lactose monohydrate, magnesium stearate. In addition, the 15 mg capsules contain black iron oxide, FD&amp;C red No. 3, FD&amp;C yellow No. 5, titanium dioxide; and the blue and clear 30 mg capsules contain D&amp;C red No. 28, FD&amp;C blue No. 1. The ingredients in the black imprinting ink are shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, purified water, strong ammonia solution, potassium hydroxide and black iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-176-20</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-176-20)  / 15 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0176-20</NDC11Code>
    <ProductNDC>25021-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Piperacillin, Tazobactam</ProprietaryName>
    <NonProprietaryName>Piperacillin Sodium, Tazobactam Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210915</StartMarketingDate>
    <EndMarketingDate>20250131</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208674</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
    <StrengthNumber>3; .375</StrengthNumber>
    <StrengthUnit>g/15mL; g/15mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-02-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20210915</StartMarketingDatePackage>
    <EndMarketingDatePackage>20250131</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Piperacillin and Tazobactam for Injection is a combination of piperacillin, a penicillin-class antibacterial and tazobactam, a beta-lactamase inhibitor, indicated for the treatment of: : 1 Intra-abdominal infections in adult and pediatric patients 2 months of age and older (1.1) , 2 Nosocomial pneumonia in adult and pediatric patients 2 months of age and older (1.2) , 3 Skin and skin structure infections in adults (1.3) , 4 Female pelvic infections in adults (1.4) , 5 Community-acquired pneumonia in adults (1.5) .</IndicationAndUsage>
    <Description>Piperacillin and Tazobactam for Injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine-carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate. The chemical formula is C23H26N5NaO7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C10H11N4NaO5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and Tazobactam for Injection, USP, is a white to off-white sterile, cryodesiccated powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. Each Piperacillin and Tazobactam for Injection, USP 2.25 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 grams of tazobactam. Each Piperacillin and Tazobactam for Injection, USP 3.375 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 grams of tazobactam. Each Piperacillin and Tazobactam for Injection, USP 4.5 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 grams of tazobactam. Piperacillin and Tazobactam for Injection, USP contains a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product. Meets the USP Organic Impurities modified Test Procedure 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>36000-176-10</NDCCode>
    <PackageDescription>10 VIAL in 1 PACKAGE (36000-176-10)  &gt; 1 INJECTION in 1 VIAL (36000-176-01)</PackageDescription>
    <NDC11Code>36000-0176-10</NDC11Code>
    <ProductNDC>36000-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nafcillin</ProprietaryName>
    <NonProprietaryName>Nafcillin</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20120201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090560</ApplicationNumber>
    <LabelerName>Claris Lifesciences, Inc.</LabelerName>
    <SubstanceName>NAFCILLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Nafcillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Culture and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (see CLINICAL PHARMACOLOGY - Susceptibility Tests). Nafcillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Nafcillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with Nafcillin for Injection, USP. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nafcillin for Injection and other antibacterial drugs, Nafcillin for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Nafcillin for Injection, USP is a sterile semisynthetic penicillin derived from 6-amino-penicillanic acid. It is the sodium salt in a parenteral dosage form. The chemical name of nafcillin sodium is Monosodium (2S, 5R, 6R)-6-(2-ethoxy-1-naphthamido)-3, 3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate monohydrate. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The structural formula of nafcillin sodium is as follows:. C21H21N2NaO5S  H2O MW=454.48. Nafcillin for Injection, USP is available as a white to off-white crystalline dry powder for reconstitution. The reconstituted solution is a clear and colorless solution. Nafcillin for Injection contains nafcillin sodium as the monohydrate equivalent to 1 gram or 2 grams of nafcillin per vial. The sodium content is 66 mg [2.9 mEq] per gram nafcillin. This product is buffered with approximately 38 mg sodium citrate per gram.</Description>
  </NDC>
  <NDC>
    <NDCCode>42254-176-80</NDCCode>
    <PackageDescription>80 g in 1 TUBE (42254-176-80)</PackageDescription>
    <NDC11Code>42254-0176-80</NDC11Code>
    <ProductNDC>42254-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20091007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA085691</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
    <Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. Triamcinolone Acetonide Ointment USP contains Triamcinolone Acetonide [Pregna-1,4-diene-3,20-dione,9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene)bis-(oxy)]-, (11β,16α)-], with the molecular formula C24H31FO6 and molecular weight 434.50. CAS 76-25-5. Triamcinolone Acetonide Ointment USP, 0.025% contains: 0.25 mg of triamcinolone acetonide per gram in a base containing white petrolatum and mineral oil. Triamcinolone Acetonide Ointment USP, 0.1% contains: 1 mg triamcinolone acetonide per gram in a base containing white petrolatum and mineral oil.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0176-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0176-3)</PackageDescription>
    <NDC11Code>49288-0176-03</NDC11Code>
    <ProductNDC>49288-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19920206</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102224</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
    <StrengthNumber>3000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0176-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0176-4)</PackageDescription>
    <NDC11Code>49288-0176-04</NDC11Code>
    <ProductNDC>49288-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19920206</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102224</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
    <StrengthNumber>3000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0176-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0176-5)</PackageDescription>
    <NDC11Code>49288-0176-05</NDC11Code>
    <ProductNDC>49288-0176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Mite, Dermatophagoides Farinae</ProprietaryName>
    <NonProprietaryName>Standardized Mite, Dermatophagoides Farinae</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19920206</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102224</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>DERMATOPHAGOIDES FARINAE</SubstanceName>
    <StrengthNumber>3000</StrengthNumber>
    <StrengthUnit>[AU]/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS],Insect Proteins [CS],Standardized Insect Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Antigens, Dermatophagoides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS AND USAGE    Standardized Mite allergenic extract is indicated for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. An orderly approach to the diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.     Mite mixtures should not be used for diagnostic skin testing. The individual mites should be used. Mite mixtures may be used for immunotherapy to treat patients who demonstrated sensi­tivity to both D. farinae and D. pteronyssinus mites. Patients who react to both D. farinae and D. pteronyssinus have demonstrated a significant cross-reactivity. Caution should be used in esca­lating treatment with mite mixtures.21PRICK-PUNCTURE TESTING: A positive control using Histamine Phosphate is important to identify those patients whose skin may not be reactive due to medications, metabolic or other rea­sons. A diluent control, if negative, would exclude false-positive reactions due to ingredients in the diluent or patients who have dermatographism.     To identify highly sensitive individuals and as a safety precaution, it is recommended that prick-puncture test using a drop of the extract concentrate (10,000 AU/ml) be performed prior to initiating very dilute intradermal testing. Prick-puncture testing is performed by placing a drop of extract concentrate on the skin and puncturing the skin through the drop with a small needle such as a bifurcated vaccinating needle. The most satisfactory sites on the back for skin testing are from the posterior axillary fold to 2.5 cm from the spinal column, and from the top of the scapula to the lower rib margins. The best areas on the arms are the volar surfaces from the axilla to 2.5 or 5 cm above the wrist, skipping the anticubital space. Glycerinated Mite extracts containing 10,000 AU/ml are recommended for prick-puncture testing. Skin reactions are based on size of erythema and wheal. For interpretation of skin reactions, refer to chart below.      Smaller, less conclusive reactions may be considered positive in conjunction with a definitive history of symptoms on exposure to the mite allergen. The more sensitive the patient the higher the probability that he/she will have symptoms related to the exposure of the offending allergen. Hence, the importance of a good patient history. Less sensitive individuals can be tested intra­dermally with an appropriately diluted extract.     A clinical study using the same patients with positive prick-puncture test (10) using the ID50EAL Method, Intradermal Dilution for 50 mm Sum of Erythema D50 Determines the Allergy Unit, has demonstrated the following:     Skin test by prick-puncture test using Standardized D. farinae Mite, 10,000 AU/ml was per­formed in 10 patients. The mean sum of erythema diameter was 76.6 mm (Range 45-104 mm). Skin test by prick-puncture test using Standardized D. pteronyssinus Mite, 10,000 AU/ml in 10 patients, the mean sum of erythema diameter was 74.7 mm (Range 43-109 mm). *C = Concentration. SINGLE DILUTION INTRADERMAL TESTING: The surface of the upper and lower arm is the usual location for skin testing. It is important that a new, sterile, disposable syringe and needle be used for each extract tested. Intracutaneous test dilutions should be made with aqueous diluent. (1) Start testing with the most dilute allergenic extract concentration. (2) A volume of 0.02-0.05 ml should be injected slowly into the superficial skin layers making a small bleb (superficial wheal). (3) For patients without a history of extreme sensitivity, a prick-puncture test of less than 2+, the initial dilu­tion for skin testing should contain 0.02 to 0.06 AU/ml (see Table I). For very sensitive patients with a prick-puncture of greater than 2+, a further dilution should be made to 0.002 to 0.006 AU/ml (see Table I). If after 20 minutes no skin reaction is obtained, continue the testing using five-fold or ten-fold incre­ments in potency until a reaction of 1+ or until the concentration of 2,000 AU (five-fold) or 1,000 AU (ten-fold) has been tested with a glycerine control. Glycerine may be used at a dilution of 0.5% as long as 0.5% glycerine produces negative control. The diluent should be tested and included in the interpretation of the skin reactions.16 INTRADERMAL TESTING–SKIN ENDPOINT TITRATION: The allergenic extracts to which the patient is sensitive, the patient's degree of sensitivity and the dose of allergen to be used in immunotherapy can be determined through the use of intracutaneous skin tests involving pro­gressive five-fold dilutions of allergenic extracts, prepared and refrigerated at 2-8° C. The critical variable is the size if the wheal and erythema produced by the intracutaneous injection of 0.01 to 0.02 ml of the test allergen producing a 4 mm diameter superficial skin wheal. For patients demon­strating a prick-puncture skin test of less than 2+, an initial screening dilution of 0.02-0.06 AU/ml is safe (see Table I). For patients demonstrating a prick-puncture skin test greater than 2+, an initial screening dilu­tion of 0.002 to 0.006 AU/ml is safe. The skin endpoint is detected by noting the dilution that pro­duces a wheal 2 mm larger than non-reacting dilutions (5 mm negative wheal) until progressive whealing with each five-fold increase in test potency occurs, i.e., a 5 mm (negative), 7 mm, 9 mm, 11 mm is the normal sequence of whealing. The 7 mm wheal would be the endpoint. The endpoint dilution is used as an initial dose concentration for immunotherapy. An endpoint dose of 0.15 ml is a safe initial dose to be followed by escalation to the optimal maximum tolerated dose for each indi­vidual.     Using Standardized D. farinae Mite, 10,000 AU/ml on 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.4). Using Standardized D. pteronyssinus Mite 10,000 AU/ml in 10 patients, the mean AU for 50 mm sum of erythema was 0.02 AU (Standard deviation was 1.7).</IndicationAndUsage>
    <Description>DESCRIPTION     The extract is sterile and intended for dilution prior to skin testing and/or immunotherapy. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. The route of administration for immunotherapy is subcutaneous. The designation AU/ml (Allergy Units per ml) is unitage based upon the relative potency of this standardized mite extract when com­pared by ELISA competition to the F.D.A. Mite Allergenic Reference Standard labeled 10,000 AU/ml assigned on the basis of quantitative skin testing by the ID50EAL Method.1,2,3,4,5,16 Lower con­centrations (e.g. 5,000 AU/ml and 3,000 AU/ml) are prepared by dilution of stock concentrates. Mite mixtures containing equal volumes of D. farinae and D. pteronyssinus are available at 5,000 AU/ml, 2,500 AU/ml and 1,500 AU/ml.     Active allergens are described by common and scientific name on the stock concentrate con­tainer label.     INGREDIENTS: Extract of Standardized Mites contain at least 99.0% adult mites and mite stages. This product may contain trace amounts of yeast and/or pork products; sodium chloride 0.95%; sodium bicarbonate 0.24%; 50% v/v glycerine as stabilizing agent and preservative.     Following is a brief description of the standardized quality procedures applied to these extracts:         1. The source material is carefully selected from whole body adult mites and mite stages cul­tured from a medium containing no material of human origin. The source material is extracted with a saline buffer and 50% v/v glycerine.         2. Several manufacturers submitted intradermal skin test data on Biopol Laboratories mite medium extract using patients who were puncture test positive (erythema greater than 40 mm) to either D. farinae or D. pteronyssinus extracts. By intradermal testing, there was 1 positive (erythe­ma greater than 20 mm) in 44 individuals at an estimated 1% level of medium contamination of mites, and 4 positives in 40 individuals at an estimated 10% contamination. Two of the individuals who were skin test positive to the mite extract and who were also skin test positive to the mite medium extract were also skin tested by the puncture method with an extract of yeast (Saccharomyces sp.) and were positive.         3. A ninhydrin protein analysis is completed to compare with the standard extract.         4. Each lot is standardized against the F.D.A. reference standard extract for total biologic activ­ity by means of ELISA competition.         5. The standardized mite extract is analyzed for glycerine content to insure a minimum of 50% v/v glycerine for optimal stability during the entire dating period.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-176-05</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-176-05) </PackageDescription>
    <NDC11Code>49643-0176-05</NDC11Code>
    <ProductNDC>49643-176</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Smut, Oat</ProprietaryName>
    <NonProprietaryName>Ustilago Avenae</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>USTILAGO AVENAE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease.(4,5,6). Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms.(7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-176-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-176-10) </PackageDescription>
    <NDC11Code>49643-0176-10</NDC11Code>
    <ProductNDC>49643-176</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Smut, Oat</ProprietaryName>
    <NonProprietaryName>Ustilago Avenae</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>USTILAGO AVENAE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease.(4,5,6). Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms.(7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-176-30</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49643-176-30) </PackageDescription>
    <NDC11Code>49643-0176-30</NDC11Code>
    <ProductNDC>49643-176</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Smut, Oat</ProprietaryName>
    <NonProprietaryName>Ustilago Avenae</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>USTILAGO AVENAE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease.(4,5,6). Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms.(7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-176-50</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-176-50) </PackageDescription>
    <NDC11Code>49643-0176-50</NDC11Code>
    <ProductNDC>49643-176</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Smut, Oat</ProprietaryName>
    <NonProprietaryName>Ustilago Avenae</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>USTILAGO AVENAE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease.(4,5,6). Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms.(7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency.</Description>
  </NDC>
  <NDC>
    <NDCCode>50228-176-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (50228-176-01) </PackageDescription>
    <NDC11Code>50228-0176-01</NDC11Code>
    <ProductNDC>50228-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180420</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205794</ApplicationNumber>
    <LabelerName>ScieGen Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180420</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies ( 14)] . The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies ( 14)] .</IndicationAndUsage>
    <Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-­dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, powder, soluble in 0.1N HCl, alcohol 96% and in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets, USP (SR), are supplied for oral administration as 100 mg (blue), 150 mg (purple), and 200 mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: copovidone, cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. In addition, the 100 mg tablet contains FD&amp;C Blue No. 1 Brilliant Blue FCF Aluminium Lake, the 150 mg tablet contains FD&amp;C Blue No. 2 Indigo Carmine Aluminium Lake and FD&amp;C Red No. 40 Allura Red AC Aluminium Lake, and the 200 mg tablet contains FD&amp;C Red No. 40 Allura Red AC Aluminium Lake. In addition, flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol, and silicon dioxide. Bupropion hydrochloride extended-release tablets, USP (SR) meets USP Dissolution Test2.</Description>
  </NDC>
  <NDC>
    <NDCCode>50228-176-10</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (50228-176-10) </PackageDescription>
    <NDC11Code>50228-0176-10</NDC11Code>
    <ProductNDC>50228-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180420</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205794</ApplicationNumber>
    <LabelerName>ScieGen Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180420</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies ( 14)] . The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies ( 14)] .</IndicationAndUsage>
    <Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-­dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, powder, soluble in 0.1N HCl, alcohol 96% and in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets, USP (SR), are supplied for oral administration as 100 mg (blue), 150 mg (purple), and 200 mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: copovidone, cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. In addition, the 100 mg tablet contains FD&amp;C Blue No. 1 Brilliant Blue FCF Aluminium Lake, the 150 mg tablet contains FD&amp;C Blue No. 2 Indigo Carmine Aluminium Lake and FD&amp;C Red No. 40 Allura Red AC Aluminium Lake, and the 200 mg tablet contains FD&amp;C Red No. 40 Allura Red AC Aluminium Lake. In addition, flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol, and silicon dioxide. Bupropion hydrochloride extended-release tablets, USP (SR) meets USP Dissolution Test2.</Description>
  </NDC>
  <NDC>
    <NDCCode>50228-176-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (50228-176-30) </PackageDescription>
    <NDC11Code>50228-0176-30</NDC11Code>
    <ProductNDC>50228-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180420</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205794</ApplicationNumber>
    <LabelerName>ScieGen Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180420</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies ( 14)] . The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies ( 14)] .</IndicationAndUsage>
    <Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-­dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, powder, soluble in 0.1N HCl, alcohol 96% and in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets, USP (SR), are supplied for oral administration as 100 mg (blue), 150 mg (purple), and 200 mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: copovidone, cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. In addition, the 100 mg tablet contains FD&amp;C Blue No. 1 Brilliant Blue FCF Aluminium Lake, the 150 mg tablet contains FD&amp;C Blue No. 2 Indigo Carmine Aluminium Lake and FD&amp;C Red No. 40 Allura Red AC Aluminium Lake, and the 200 mg tablet contains FD&amp;C Red No. 40 Allura Red AC Aluminium Lake. In addition, flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol, and silicon dioxide. Bupropion hydrochloride extended-release tablets, USP (SR) meets USP Dissolution Test2.</Description>
  </NDC>
  <NDC>
    <NDCCode>50228-176-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (50228-176-60) </PackageDescription>
    <NDC11Code>50228-0176-60</NDC11Code>
    <ProductNDC>50228-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
    <ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
    <NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180420</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205794</ApplicationNumber>
    <LabelerName>ScieGen Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180420</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies ( 14)] . The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies ( 14)] .</IndicationAndUsage>
    <Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-­dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white, powder, soluble in 0.1N HCl, alcohol 96% and in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets, USP (SR), are supplied for oral administration as 100 mg (blue), 150 mg (purple), and 200 mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: copovidone, cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. In addition, the 100 mg tablet contains FD&amp;C Blue No. 1 Brilliant Blue FCF Aluminium Lake, the 150 mg tablet contains FD&amp;C Blue No. 2 Indigo Carmine Aluminium Lake and FD&amp;C Red No. 40 Allura Red AC Aluminium Lake, and the 200 mg tablet contains FD&amp;C Red No. 40 Allura Red AC Aluminium Lake. In addition, flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol, and silicon dioxide. Bupropion hydrochloride extended-release tablets, USP (SR) meets USP Dissolution Test2.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-176-01</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (50242-176-01)  *  1 VIAL, SINGLE-USE in 1 CARTON (50242-037-06)  / 10 mL in 1 VIAL, SINGLE-USE *  1 VIAL, SINGLE-USE in 1 CARTON (50242-901-09)  / 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>50242-0176-01</NDC11Code>
    <ProductNDC>50242-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tnkase</ProprietaryName>
    <NonProprietaryName>Tenecteplase</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20240105</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103909</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240105</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TNKase is a tissue plasminogen activator (tPA) indicated: 1 for the treatment of acute ischemic stroke (AIS) in adults. (1.1), 2 to reduce the risk of death associated with acute ST elevation myocardial infarction (STEMI) in adults. (1.2).</IndicationAndUsage>
    <Description>Tenecteplase is a tissue plasminogen activator (tPA) produced by recombinant DNA technology using a mammalian cell line (Chinese Hamster Ovary cells). Tenecteplase is a 527-amino acid glycoprotein developed by introducing the following modifications to the complementary DNA (cDNA) for natural human tPA: a substitution of threonine 103 with asparagine, and a substitution of asparagine 117 with glutamine, both within the kringle 1 domain, and a tetra-alanine substitution at amino acids 296–299 in the protease domain. It has a molecular weight of 58,742 daltons. Biological potency is determined by an in vitro clot lysis assay and is expressed in tenecteplase specific units. The specific activity of tenecteplase has been defined as 200 units/mg. TNKase (tenecteplase) for injection is a sterile, white to pale yellow, lyophilized powder for intravenous bolus administration after reconstitution with Sterile Water for Injection, USP. Each 25 mg single-dose vial of TNKase nominally contains 25 mg of tenecteplase, arginine (261 mg), phosphoric acid (approximately 80 mg), and polysorbate 20 (2.0 mg). Following reconstitution with the supplied 5.2 mL single-dose vial of Sterile Water for Injection, USP, the final concentration is 5 mg/mL with a pH of approximately 7.3. Each 50 mg single-dose vial of TNKase nominally contains 50 mg of tenecteplase, arginine (522 mg), phosphoric acid (approximately 160 mg), and polysorbate 20 (4.0 mg). Following reconstitution with the supplied 10 mL single-dose vial of Sterile Water for Injection, USP, the final concentration is 5 mg/mL with a pH of approximately 7.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>50268-176-15</NDCCode>
    <PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-176-15)  / 1 TABLET in 1 BLISTER PACK (50268-176-11) </PackageDescription>
    <NDC11Code>50268-0176-15</NDC11Code>
    <ProductNDC>50268-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cilostazol</ProprietaryName>
    <NonProprietaryName>Cilostazol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20161018</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077030</ApplicationNumber>
    <LabelerName>AvPAK</LabelerName>
    <SubstanceName>CILOSTAZOL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161018</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cilostazol tablets are indicated for the reduction of symptoms of intermittent claudication, as demonstrated by an increased walking distance.</IndicationAndUsage>
    <Description>Cilostazol is a quinolinone derivative that inhibits cellular phosphodiesterase (more specific for phosphodiesterase III). The empirical formula of cilostazol is C 20H 27N 5O 2, and its molecular weight is 369.47. Cilostazol is 6-[4-(1-cyclohexyl-1H-tetrazol-5-yl) butoxy]-3,4-dihydro-2(1H)-quinolinone, CAS-73963-72-1. The structural formula is. Cilostazol occurs as white to off-white crystals or as a crystalline powder that is slightly soluble in methanol and ethanol, and is practically insoluble in water, 0.1 N HCl, and 0.1 N NaOH. Cilostazol tablets, USP for oral administration are available in 50 mg and 100 mg round, white tablets. Each tablet, in addition to the active ingredient, contains the following inactive ingredients: corn starch, croscarmellose sodium, magnesium stearate, and silicon dioxide. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-176-04</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (55150-176-04)  / 4 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>55150-0176-04</NDC11Code>
    <ProductNDC>55150-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Granisetron Hydrochloride</ProprietaryName>
    <NonProprietaryName>Granisetron Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20160706</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204238</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>GRANISETRON HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/4mL</StrengthUnit>
    <Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Granisetron hydrochloride injection,  is a serotonin-3 (5-HT3) receptor antagonist indicated for.</IndicationAndUsage>
    <Description>Granisetron hydrochloride injection, USP is a serotonin-3 (5-HT3) receptor antagonist. Chemically it is endo-N-(9-methyl-9-azabicyclo [3.3.1] non-3-yl)-1-methyl-1H-indazole-3-carboxamide hydrochloride with a molecular weight of 348.9 (312.4 free base). Its molecular formula is C18H24N4OHCl, while its chemical structure is. Granisetron hydrochloride USP is a white or almost white powder that is readily soluble in water and normal saline at 20°C. Granisetron hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, aqueous solution for intravenous administration. Granisetron hydrochloride injection, USP 1 mg/mL is available in 1 mL single-dose and 4 mL multiple-dose vials. Each mL contains 1.12 mg granisetron hydrochloride USP equivalent to granisetron 1 mg; sodium chloride, 9 mg; citric acid, 2 mg; methylparaben, 1.8 mg and propylparaben, 0.2 mg, as preservatives, water for injection, q.s., sodium hydroxide and hydrochloric acid, as pH adjusters. The solution's pH ranges from 4.0 to 6.0.</Description>
  </NDC>
</NDCList>