RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70518-0335-0</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BLISTER PACK (70518-0335-0) </PackageDescription>
    <NDC11Code>70518-0335-00</NDC11Code>
    <ProductNDC>70518-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170317</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090510</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170317</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydrochlorothiazide capsules are indicated in the management of hypertension either as the sole therapeutic agent, or in combination with other antihypertensives. Unlike potassium sparing combination diuretic products, hydrochlorothiazide capsules may be used in those patients in whom the development of hyperkalemia cannot be risked, including patients taking ACE inhibitors. Usage in Pregnancy: The routine use of diuretics in an otherwise healthy woman is inappropriate and exposes mother and fetus to unnecessary hazard. Diuretics do not prevent development of toxemia of pregnancy, and there is no satisfactory evidence that they are useful in the treatment of developed toxemia. Edema during pregnancy may arise from pathological causes or from the physiologic and mechanical consequences of pregnancy. Diuretics are indicated in pregnancy when edema is due to pathologic causes, just as they are in the absence of pregnancy. Dependent edema in pregnancy resulting from restriction of venous return by the expanded uterus is properly treated through elevation of the lower extremities and use of support hose; use of diuretics to lower intravascular volume in this case is illogical and unnecessary. There is hypervolemia during normal pregnancy which is harmful to neither the fetus nor the mother (in the absence of cardiovascular disease), but which is associated with edema, including generalized edema in the majority of pregnant women. If this edema produces discomfort, increased recumbency will often provide relief. In rare instances this edema may cause extreme discomfort which is not relieved by rest. In these cases a short course of diuretics may provide relief and may be appropriate.</IndicationAndUsage>
    <Description>Hydrochlorothiazide, USP is the 3,4-dihydro derivative of chlorothiazide. Its chemical name is 6-Chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its molecular formula is C 7H 8ClN 3O 4S 2; its molecular weight is 297.74; and its structural formula is:. It is a white, or practically white, crystalline powder which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Hydrochlorothiazide is supplied as 12.5 mg capsules for oral use. Inactive ingredients: Black iron oxide, colloidal silicon dioxide, gelatin, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>70518-0335-1</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (70518-0335-1) </PackageDescription>
    <NDC11Code>70518-0335-01</NDC11Code>
    <ProductNDC>70518-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170317</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090510</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170524</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70518-0335-2</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BLISTER PACK (70518-0335-2) </PackageDescription>
    <NDC11Code>70518-0335-02</NDC11Code>
    <ProductNDC>70518-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170317</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090510</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>12.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190402</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydrochlorothiazide capsules are indicated in the management of hypertension either as the sole therapeutic agent, or in combination with other antihypertensives. Unlike potassium sparing combination diuretic products, hydrochlorothiazide capsules may be used in those patients in whom the development of hyperkalemia cannot be risked, including patients taking ACE inhibitors. Usage in Pregnancy: The routine use of diuretics in an otherwise healthy woman is inappropriate and exposes mother and fetus to unnecessary hazard. Diuretics do not prevent development of toxemia of pregnancy, and there is no satisfactory evidence that they are useful in the treatment of developed toxemia. Edema during pregnancy may arise from pathological causes or from the physiologic and mechanical consequences of pregnancy. Diuretics are indicated in pregnancy when edema is due to pathologic causes, just as they are in the absence of pregnancy. Dependent edema in pregnancy resulting from restriction of venous return by the expanded uterus is properly treated through elevation of the lower extremities and use of support hose; use of diuretics to lower intravascular volume in this case is illogical and unnecessary. There is hypervolemia during normal pregnancy which is harmful to neither the fetus nor the mother (in the absence of cardiovascular disease), but which is associated with edema, including generalized edema in the majority of pregnant women. If this edema produces discomfort, increased recumbency will often provide relief. In rare instances this edema may cause extreme discomfort which is not relieved by rest. In these cases a short course of diuretics may provide relief and may be appropriate.</IndicationAndUsage>
    <Description>Hydrochlorothiazide, USP is the 3,4-dihydro derivative of chlorothiazide. Its chemical name is 6-Chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its molecular formula is C 7H 8ClN 3O 4S 2; its molecular weight is 297.74; and its structural formula is:. It is a white, or practically white, crystalline powder which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Hydrochlorothiazide is supplied as 12.5 mg capsules for oral use. Inactive ingredients: Black iron oxide, colloidal silicon dioxide, gelatin, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>15631-0335-0</NDCCode>
    <PackageDescription>100 PELLET in 1 PACKAGE (15631-0335-0) </PackageDescription>
    <NDC11Code>15631-0335-00</NDC11Code>
    <ProductNDC>15631-0335</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Phosphoricum Acidum</ProprietaryName>
    <NonProprietaryName>Phosphoricum Acidum</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150912</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>PHOSPHORIC ACID</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2021-09-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>41167-0335-0</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (41167-0335-0)  / 28 g in 1 TUBE</PackageDescription>
    <NDC11Code>41167-0335-00</NDC11Code>
    <ProductNDC>41167-0335</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cortizone 10 Intensive Healing Feminine Itch Relief</ProprietaryName>
    <NonProprietaryName>Hydrocortisone</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <EndMarketingDate>20250301</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M017</ApplicationNumber>
    <LabelerName>Chattem, Inc.</LabelerName>
    <SubstanceName>HYDROCORTISONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20140101</StartMarketingDatePackage>
    <EndMarketingDatePackage>20250301</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>50090-0335-0</NDCCode>
    <PackageDescription>15 mL in 1 BOTTLE, SPRAY (50090-0335-0) </PackageDescription>
    <NDC11Code>50090-0335-00</NDC11Code>
    <ProductNDC>50090-0335</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nasal</ProprietaryName>
    <NonProprietaryName>Oxymetazoline Hydrochloride</NonProprietaryName>
    <DosageFormName>SPRAY</DosageFormName>
    <RouteName>NASAL</RouteName>
    <StartMarketingDate>20090317</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>OXYMETAZOLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <PackageNdcExcludeFlag>Y</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>51927-0335-0</NDCCode>
    <PackageDescription>1 kg in 1 BOTTLE (51927-0335-0) </PackageDescription>
    <NDC11Code>51927-0335-00</NDC11Code>
    <ProductNDC>51927-0335</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Codeine Phosphate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20240409</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>Professional Compounding Centers of America</LabelerName>
    <SubstanceName>CODEINE PHOSPHATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <DEASchedule>CII</DEASchedule>
    <Status>Unfinished</Status>
    <LastUpdate>2026-01-13</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>09-APR-24</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>67651-0335-0</NDCCode>
    <PackageDescription>19500 TABLET in 1 DRUM (67651-0335-0) </PackageDescription>
    <NDC11Code>67651-0335-00</NDC11Code>
    <ProductNDC>67651-0335</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Tenapanor Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <StartMarketingDate>20190912</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Patheon Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>TENAPANOR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>53.2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2023-01-24</LastUpdate>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>12-SEP-19</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0335-0</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE (71335-0335-0) </PackageDescription>
    <NDC11Code>71335-0335-00</NDC11Code>
    <ProductNDC>71335-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010829</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040362</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasiaNonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritisRheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)Ankylosing spondylitisAcute and subacute bursitisAcute nonspecific tenosynovitis Acute gouty arthritisPost-traumatic osteoarthritis Synovitis of osteoarthritisEpicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosusSystemic derznatomyositis (polymyositis)Acute rheumatic carditis. 4. Dermatologic Diseases. PemphigusBullous dermatitis herpetiformisSevere erythema multiforme (Stevens-Johnson syndrome)Exfoliative dermatitisMycosis fungoidesSevere psoriasisSevere seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitisBronchial asthmaContact dermatitisAtopic dermatitis             Serum sickness            Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcersHerpes zoster ophthalmicusAnterior segment inflammationDiffuse posterior uveitis and choroiditisSympathetic ophthalmiaAllergic conjunctivitisKeratitisChorioretinitisOptic neuritisIritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosisLoeffler’s syndrome not manageable by other meansBerylliosisFulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy.Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adultsSecondary thrombocytopenia in adultsAcquired (autoimmune) hemolytic anemiaErythroblastopenia (RBC anemia)Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adultsAcute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitisRegional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently  with appropriate antituberculous chemotherapy            Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1, 4-diene-3, 11, 20-trione, 17, 21-dihydroxy-. The structural formula is represented below. Molecular weight: 358.44. Prednisone Tablets, USP are available in three strengths: 5 mg, 10 mg, and 20 mg. In addition, each tablet contains the following Inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD &amp; C yellow #6 aluminum lake HT 15-18%.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0335-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-0335-30) </PackageDescription>
    <NDC11Code>00069-0335-30</NDC11Code>
    <ProductNDC>0069-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cibinqo</ProprietaryName>
    <NonProprietaryName>Abrocitinib</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220224</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213871</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>ABROCITINIB</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220224</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.</IndicationAndUsage>
    <Description>CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-0335-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0378-0335-01) </PackageDescription>
    <NDC11Code>00378-0335-01</NDC11Code>
    <ProductNDC>0378-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol</ProprietaryName>
    <NonProprietaryName>Haloperidol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090717</StartMarketingDate>
    <EndMarketingDate>20260331</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA070278</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>HALOPERIDOL</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20090717</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260331</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol tablets are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
    <Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: colloidal silicon dioxide, FD&amp;C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. In addition, the 10 mg and 20 mg tablets also contain FD&amp;C Blue No. 1 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-335-04</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-335-04)  / 2 mL in 1 VIAL (13533-335-40) </PackageDescription>
    <NDC11Code>13533-0335-04</NDC11Code>
    <ProductNDC>13533-335</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gamastan</ProprietaryName>
    <NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20180205</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101134</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>.165</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMASTAN is a human immune globulin indicated for:.</IndicationAndUsage>
    <Description>GAMASTAN is a clear or slightly opalescent, and colorless or pale yellow sterile solution of polyvalent human immune globulin for intramuscular administration. GAMASTAN contains no preservative. GAMASTAN is prepared from pools of human plasma collected from healthy donors by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. GAMASTAN consists of 15% to18% protein at pH of 4.1 to 4.8 in 0.16 to 0.26 M glycine. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of GAMASTAN, there are several steps with the capacity for viral inactivation or removal. The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-335-12</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (13533-335-12)  / 10 mL in 1 VIAL (13533-335-13) </PackageDescription>
    <NDC11Code>13533-0335-12</NDC11Code>
    <ProductNDC>13533-335</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gamastan</ProprietaryName>
    <NonProprietaryName>Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20180205</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101134</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>.165</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180205</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMASTAN is a human immune globulin indicated for:.</IndicationAndUsage>
    <Description>GAMASTAN is a clear or slightly opalescent, and colorless or pale yellow sterile solution of polyvalent human immune globulin for intramuscular administration. GAMASTAN contains no preservative. GAMASTAN is prepared from pools of human plasma collected from healthy donors by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. GAMASTAN consists of 15% to18% protein at pH of 4.1 to 4.8 in 0.16 to 0.26 M glycine. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of GAMASTAN, there are several steps with the capacity for viral inactivation or removal. The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>21695-335-10</NDCCode>
    <PackageDescription>10 mL in 1 BOTTLE, PLASTIC (21695-335-10)</PackageDescription>
    <NDC11Code>21695-0335-10</NDC11Code>
    <ProductNDC>21695-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Polymyxin B Sulfate And Trimethoprim</ProprietaryName>
    <NonProprietaryName>Polymyxin B Sulfate And Trimethoprim</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>19980413</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064211</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>POLYMYXIN B SULFATE; TRIMETHOPRIM SULFATE</SubstanceName>
    <StrengthNumber>10000; 1</StrengthNumber>
    <StrengthUnit>mL/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Polymyxin-class Antibacterial [EPC],Polymyxins [CS],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Polymyxin B Sulfate and Trimethoprim Ophthalmic Solution is indicated in the treatment of surface ocular bacterial infections, including acute bacterial conjunctivitis, and blepharoconjunctivitis, caused by susceptible strains of the following microorganisms: Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pneumoniae, Streptococcus viridans, Haemophilus influenzae and Pseudomonas aeruginosa.*. *Efficacy for this organism in this organ system was studied in fewer than 10 infections.</IndicationAndUsage>
    <Description>Polymyxin B Sulfate and Trimethoprim Ophthalmic Solution is a sterile antimicrobial solution for topical ophthalmic use. It has a pH of 4.0 to 6.2 and osmolality of 270 to 310 mOsm/kg. Chemical Names: Trimethoprim sulfate, 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine sulfate (2:1), is a white, odorless, crystalline powder with a molecular weight of 678.72 and the following structural formula. Polymyxin B sulfate is the sulfate salt of polymyxin B1 and B2 which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formula are. Contains: Actives: polymyxin B sulfate 10,000 units/mL; trimethoprim sulfate equivalent to trimethoprim 1mg/mL. Preservative: benzalkonium chloride 0.04 mg/mL. Inactives: sodium chloride; sulfuric acid and purified water. May also contain sodium hydroxide for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0335-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0335-1)</PackageDescription>
    <NDC11Code>49288-0335-01</NDC11Code>
    <ProductNDC>49288-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Onion</ProprietaryName>
    <NonProprietaryName>Onion</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>ONION</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0335-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0335-2)</PackageDescription>
    <NDC11Code>49288-0335-02</NDC11Code>
    <ProductNDC>49288-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Onion</ProprietaryName>
    <NonProprietaryName>Onion</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>ONION</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0335-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0335-3)</PackageDescription>
    <NDC11Code>49288-0335-03</NDC11Code>
    <ProductNDC>49288-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Onion</ProprietaryName>
    <NonProprietaryName>Onion</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>ONION</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0335-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0335-4)</PackageDescription>
    <NDC11Code>49288-0335-04</NDC11Code>
    <ProductNDC>49288-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Onion</ProprietaryName>
    <NonProprietaryName>Onion</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>ONION</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0335-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0335-5)</PackageDescription>
    <NDC11Code>49288-0335-05</NDC11Code>
    <ProductNDC>49288-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Onion</ProprietaryName>
    <NonProprietaryName>Onion</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>ONION</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-335-05</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-335-05) </PackageDescription>
    <NDC11Code>49643-0335-05</NDC11Code>
    <ProductNDC>49643-335</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Australian Pine Pollen</ProprietaryName>
    <NonProprietaryName>Casuarina Equisetifoli</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CASUARINA EQUISETIFOLIA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-335-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-335-10) </PackageDescription>
    <NDC11Code>49643-0335-10</NDC11Code>
    <ProductNDC>49643-335</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Australian Pine Pollen</ProprietaryName>
    <NonProprietaryName>Casuarina Equisetifoli</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CASUARINA EQUISETIFOLIA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-335-30</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49643-335-30) </PackageDescription>
    <NDC11Code>49643-0335-30</NDC11Code>
    <ProductNDC>49643-335</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Australian Pine Pollen</ProprietaryName>
    <NonProprietaryName>Casuarina Equisetifoli</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CASUARINA EQUISETIFOLIA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-335-50</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-335-50) </PackageDescription>
    <NDC11Code>49643-0335-50</NDC11Code>
    <ProductNDC>49643-335</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Australian Pine Pollen</ProprietaryName>
    <NonProprietaryName>Casuarina Equisetifoli</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CASUARINA EQUISETIFOLIA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-335-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-335-30) </PackageDescription>
    <NDC11Code>50742-0335-30</NDC11Code>
    <ProductNDC>50742-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>58118-0335-8</NDCCode>
    <PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (58118-0335-8) </PackageDescription>
    <NDC11Code>58118-0335-08</NDC11Code>
    <ProductNDC>58118-0335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20191008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090174</ApplicationNumber>
    <LabelerName>Clinical Solutions Wholesale, LLC</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules, USP are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of: 1   Major Depressive Disorder (MDD) , 2   Generalized Anxiety Disorder (GAD) , 3   Social Anxiety Disorder (SAD) , 4   Panic Disorder (PD) .</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release capsule, USP is an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the molecular formula of C 17H 27NO 2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows:. Venlafaxine hydrochloride, USP is a white to off-white crystalline powder; soluble in methanol and in water. Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Venlafaxine hydrochloride extended-release capsules, USP intended for oral administration contains 37.5 mg, 75 mg and 150 mg of venlafaxine. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, cetostearyl alcohol, gelatin, hypromellose, microcrystalline cellulose, polyacrylate dispersion, sodium lauryl sulfate, talc and titanium dioxide. Additionally each 37.5 mg capsule shell contains black iron oxide and each 75 mg and 150 mg capsule shell contains red iron oxide. The capsule is printed with black pharmaceutical ink which contains black iron oxide as coloring agent. The product complies with USP dissolution test 7.</Description>
  </NDC>
  <NDC>
    <NDCCode>59746-335-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (59746-335-01) </PackageDescription>
    <NDC11Code>59746-0335-01</NDC11Code>
    <ProductNDC>59746-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium Tablets, 100 Mg</ProprietaryName>
    <NonProprietaryName>Losartan Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120918</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201170</ApplicationNumber>
    <LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2), 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
    <Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H­tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, polyvinyl alcohol, polyethylene glycol/macrogol, pregelatinized starch, magnesium stearate, talc, titanium dioxide, D&amp;C yellow No. 10 aluminum lake and FD&amp;C blue No. 2 indigo carmine aluminum lake. Losartan potassium tablets 25 mg, 50 mg and 100 mg contain potassium in the  following amounts:  2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>59746-335-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (59746-335-10) </PackageDescription>
    <NDC11Code>59746-0335-10</NDC11Code>
    <ProductNDC>59746-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium Tablets, 100 Mg</ProprietaryName>
    <NonProprietaryName>Losartan Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120918</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201170</ApplicationNumber>
    <LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2), 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
    <Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H­tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, polyvinyl alcohol, polyethylene glycol/macrogol, pregelatinized starch, magnesium stearate, talc, titanium dioxide, D&amp;C yellow No. 10 aluminum lake and FD&amp;C blue No. 2 indigo carmine aluminum lake. Losartan potassium tablets 25 mg, 50 mg and 100 mg contain potassium in the  following amounts:  2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>59746-335-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (59746-335-30) </PackageDescription>
    <NDC11Code>59746-0335-30</NDC11Code>
    <ProductNDC>59746-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium Tablets, 100 Mg</ProprietaryName>
    <NonProprietaryName>Losartan Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120918</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201170</ApplicationNumber>
    <LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2), 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
    <Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H­tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, polyvinyl alcohol, polyethylene glycol/macrogol, pregelatinized starch, magnesium stearate, talc, titanium dioxide, D&amp;C yellow No. 10 aluminum lake and FD&amp;C blue No. 2 indigo carmine aluminum lake. Losartan potassium tablets 25 mg, 50 mg and 100 mg contain potassium in the  following amounts:  2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>59746-335-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (59746-335-90) </PackageDescription>
    <NDC11Code>59746-0335-90</NDC11Code>
    <ProductNDC>59746-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium Tablets, 100 Mg</ProprietaryName>
    <NonProprietaryName>Losartan Potassium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120918</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201170</ApplicationNumber>
    <LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2), 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
    <Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H­tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, polyvinyl alcohol, polyethylene glycol/macrogol, pregelatinized starch, magnesium stearate, talc, titanium dioxide, D&amp;C yellow No. 10 aluminum lake and FD&amp;C blue No. 2 indigo carmine aluminum lake. Losartan potassium tablets 25 mg, 50 mg and 100 mg contain potassium in the  following amounts:  2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-335-00</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE (63187-335-00) </PackageDescription>
    <NDC11Code>63187-0335-00</NDC11Code>
    <ProductNDC>63187-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin</ProprietaryName>
    <NonProprietaryName>Amoxicillin</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20061228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065334</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>AMOXICILLIN</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin for oral suspension, USP and other antibacterial drugs, amoxicillin for oral suspension, USP should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin for oral suspension, USP is indicated in the treatment of infections due to susceptible (ONLY β-lactamase–negative) isolates of the designated bacteria in the conditions listed below.</IndicationAndUsage>
    <Description>Formulation of amoxicillin for oral suspension, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45.Each 5 mL of reconstituted suspension contains amoxicillin trihydrate equivalent to 200 mg or 400 mg anhydrous amoxicillin. Each 5 mL of the 200 mg and 400 mg reconstituted suspension contains 0.16 mEq (3.61 mg) of sodium; Inactive ingredients: sucrose, sodium citrate, sodium benzoate, edetate disodium, FD&amp;C Red No. 3, xanthan gum, bubble-gum flavor, and colloidal silicon dioxide.</Description>
  </NDC>
</NDCList>