RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70518-0336-0</NDCCode>
    <PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0336-0) </PackageDescription>
    <NDC11Code>70518-0336-00</NDC11Code>
    <ProductNDC>70518-0336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zithromax</ProprietaryName>
    <NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050784</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
    <Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&amp;C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&amp;C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
  </NDC>
  <NDC>
    <NDCCode>70518-0336-1</NDCCode>
    <PackageDescription>4 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0336-1) </PackageDescription>
    <NDC11Code>70518-0336-01</NDC11Code>
    <ProductNDC>70518-0336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zithromax</ProprietaryName>
    <NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050784</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-06-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70518-0336-2</NDCCode>
    <PackageDescription>2 POUCH in 1 BOX (70518-0336-2)  / 1 TABLET, FILM COATED in 1 POUCH (70518-0336-3) </PackageDescription>
    <NDC11Code>70518-0336-02</NDC11Code>
    <ProductNDC>70518-0336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zithromax</ProprietaryName>
    <NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050784</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240305</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
    <Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&amp;C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&amp;C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
  </NDC>
  <NDC>
    <NDCCode>70518-0336-4</NDCCode>
    <PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0336-4) </PackageDescription>
    <NDC11Code>70518-0336-04</NDC11Code>
    <ProductNDC>70518-0336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zithromax</ProprietaryName>
    <NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050784</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ZITHROMAX (azithromycin) is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
    <Description>ZITHROMAX (azithromycin tablets and azithromycin for oral suspension) contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙2H2O and a molecular weight of 785.0. ZITHROMAX is supplied as tablets containing azithromycin dihydrate equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: dibasic calcium phosphate anhydrous, pregelatinized starch, sodium croscarmellose, magnesium stearate, sodium lauryl sulfate, hypromellose, lactose, titanium dioxide, triacetin, and D&amp;C Red #30 aluminum lake. ZITHROMAX for oral suspension is supplied in bottles containing azithromycin dihydrate powder equivalent to 300 mg, 600 mg, 900 mg, or 1200 mg azithromycin per bottle and the following inactive ingredients: sucrose; sodium phosphate, tribasic, anhydrous; hydroxypropyl cellulose; xanthan gum; FD&amp;C Red #40; and spray dried artificial cherry, creme de vanilla, and banana flavors. After constitution, each 5 mL of suspension contains 100 mg or 200 mg of azithromycin.</Description>
  </NDC>
  <NDC>
    <NDCCode>15631-0336-0</NDCCode>
    <PackageDescription>100 PELLET in 1 PACKAGE (15631-0336-0) </PackageDescription>
    <NDC11Code>15631-0336-00</NDC11Code>
    <ProductNDC>15631-0336</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Phosphorus</ProprietaryName>
    <NonProprietaryName>Phosphorus</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150912</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>PHOSPHORUS</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2021-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>41167-0336-0</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (41167-0336-0)  / 56 g in 1 TUBE</PackageDescription>
    <NDC11Code>41167-0336-00</NDC11Code>
    <ProductNDC>41167-0336</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cortizone 10 Sensitive Skin Anti-itch Creme</ProprietaryName>
    <NonProprietaryName>Hydrocortisone</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M017</ApplicationNumber>
    <LabelerName>Chattem, Inc.</LabelerName>
    <SubstanceName>HYDROCORTISONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>■ temporarily relieves itching associated with minor skin irritations, inflammation, and rashes due to:.    ■ eczema ■ psoriasis  ■ poison ivy, oak, sumac ■ insect bites ■ detergents ■ jewelry  ■ cosmetics.    ■ soaps ■ seborrheic dermatitis. ■ other uses of this product should be only under the advice and supervision of a doctor.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>51927-0336-0</NDCCode>
    <PackageDescription>1 kg in 1 BOTTLE (51927-0336-0) </PackageDescription>
    <NDC11Code>51927-0336-00</NDC11Code>
    <ProductNDC>51927-0336</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Mebendazole</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20240508</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>Professional Compounding Centers of America</LabelerName>
    <SubstanceName>MEBENDAZOLE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-03-06</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>08-MAY-24</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>66406-0336-0</NDCCode>
    <PackageDescription>72 BOTTLE in 1 CASE (66406-0336-0)  / 30 TABLET, MULTILAYER, EXTENDED RELEASE in 1 BOTTLE</PackageDescription>
    <NDC11Code>66406-0336-00</NDC11Code>
    <ProductNDC>66406-0336</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Dextromethorphan Hydrobromide And Bupropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, MULTILAYER, EXTENDED RELEASE</DosageFormName>
    <StartMarketingDate>20220818</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Patheon Inc.</LabelerName>
    <SubstanceName>BUPROPION HYDROCHLORIDE; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
    <StrengthNumber>105; 45</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2026-05-07</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>18-AUG-22</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>67651-0336-0</NDCCode>
    <PackageDescription>43000 CAPSULE in 1 DRUM (67651-0336-0) </PackageDescription>
    <NDC11Code>67651-0336-00</NDC11Code>
    <ProductNDC>67651-0336</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Pimavanserin Tartrate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <StartMarketingDate>20180628</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Patheon Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PIMAVANSERIN TARTRATE</SubstanceName>
    <StrengthNumber>34</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-06-14</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>28-JUN-18</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0336-0</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (71335-0336-0) </PackageDescription>
    <NDC11Code>71335-0336-00</NDC11Code>
    <ProductNDC>71335-0336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
    <NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130415</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202800</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
    <StrengthNumber>300; 60</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240809</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain,where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. ·         Have not been tolerated or are not expected to be tolerated. ·         Have not provided adequate analgesia or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
    <Description>Acetaminophen and codeine phosphate tablets, USP are for oral administration. Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. Each tablet contains. Acetaminophen............................300 mgCodeine Phosphate........................15 mg(Warning: May be habit forming)ORAcetaminophen............................300 mgCodeine Phosphate........................30 mg(Warning: May be habit forming)ORAcetaminophen............................300 mgCodeine Phosphate........................60 mg(Warning: May be habit forming)In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, sodium lauryl sulfate, and stearic acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>0069-0336-21</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (0069-0336-21)  / 112 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>00069-0336-21</NDC11Code>
    <ProductNDC>0069-0336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Revatio</ProprietaryName>
    <NonProprietaryName>Sildenafil Citrate</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140602</StartMarketingDate>
    <EndMarketingDate>20260131</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA203109</ApplicationNumber>
    <LabelerName>PFIZER LABORATORIES DIV PFIZER INC</LabelerName>
    <SubstanceName>SILDENAFIL CITRATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20140602</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260131</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Adults. REVATIO is indicated for the treatment of pulmonary arterial hypertension (PAH) (World Health Organization [WHO] Group I) in adults to improve exercise ability and delay clinical worsening [see Clinical Studies (14)]. Pediatric Patients (1 to 17 Years old). REVATIO is indicated in pediatric patients 1 to 17 years old for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) to improve exercise ability and, in pediatric patients too young to perform standardized exercise testing, pulmonary hemodynamics thought to underlie improvements in exercise [see Clinical Studies (14)].</IndicationAndUsage>
    <Description>REVATIO, phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. REVATIO (sildenafil) Tablets: REVATIO is formulated as white, film-coated round tablets for oral administration. Each tablet contains sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: anhydrous dibasic calcium phosphate, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, and triacetin. REVATIO (sildenafil) Injection: REVATIO is supplied as a clear, colorless, sterile, ready to use solution in a single‑use vial containing 10 mg/12.5 mL of sildenafil. Each mL of solution contains 1.124 mg sildenafil citrate (equivalent to 0.8 mg sildenafil), 50.5 mg dextrose, and water for injection. REVATIO (sildenafil) for Oral Suspension: REVATIO is supplied as white to off-white powders containing 1.57 g of sildenafil citrate (equivalent to1.12 g sildenafil) in an amber glass bottle intended for reconstitution. Following reconstitution with 90 mL water, the total volume of the oral suspension is 112 mL and the oral suspension contains 10 mg/mL sildenafil. The inactive ingredients include citric acid anhydrous, colloidal silicon dioxide anhydrous, grape flavor, sodium benzoate, sodium citrate dihydrate, sorbitol, sucralose, titanium dioxide, and xanthan gum. In addition to the bottle, a press-in bottle adapter and an oral dosing syringe (with 0.5 mL and 2 mL dose markings) are provided.</Description>
  </NDC>
  <NDC>
    <NDCCode>0168-0336-60</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (0168-0336-60)  &gt; 60 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>00168-0336-60</NDC11Code>
    <ProductNDC>0168-0336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>LOTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20030421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040467</ApplicationNumber>
    <LabelerName>E. Fougera &amp; Co. a division of Fougera Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Triamcinolone Acetonide Lotion USP, 0.025% and 0.1% are indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
    <Description>Triamcinolone Acetonide USP is a topical corticosteroid designated chemically as 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Structural formula. Each mL of 0.025% and 0.1% Triamcinolone Acetonide Lotion USP, provides 0.25 mg and 1 mg triamcinolone acetonide USP, respectively, in a lotion base containing propylene glycol, cetyl alcohol, stearyl alcohol, sorbitan monopalmitate, polysorbate 20, simethicone, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>47593-336-41</NDCCode>
    <PackageDescription>750 mL in 1 BOTTLE, PLASTIC (47593-336-41) </PackageDescription>
    <NDC11Code>47593-0336-41</NDC11Code>
    <ProductNDC>47593-336</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Episoft</ProprietaryName>
    <NonProprietaryName>Triclosan</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20000310</StartMarketingDate>
    <EndMarketingDate>20180426</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333E</ApplicationNumber>
    <LabelerName>Ecolab Inc.</LabelerName>
    <SubstanceName>TRICLOSAN</SubstanceName>
    <StrengthNumber>0.3</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-04-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20000310</StartMarketingDatePackage>
    <EndMarketingDatePackage>20180426</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>49288-0336-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0336-1)</PackageDescription>
    <NDC11Code>49288-0336-01</NDC11Code>
    <ProductNDC>49288-0336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Oyster</ProprietaryName>
    <NonProprietaryName>Oyster</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>OYSTER</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0336-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0336-2)</PackageDescription>
    <NDC11Code>49288-0336-02</NDC11Code>
    <ProductNDC>49288-0336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Oyster</ProprietaryName>
    <NonProprietaryName>Oyster</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>OYSTER</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0336-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0336-3)</PackageDescription>
    <NDC11Code>49288-0336-03</NDC11Code>
    <ProductNDC>49288-0336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Oyster</ProprietaryName>
    <NonProprietaryName>Oyster</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>OYSTER</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0336-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0336-4)</PackageDescription>
    <NDC11Code>49288-0336-04</NDC11Code>
    <ProductNDC>49288-0336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Oyster</ProprietaryName>
    <NonProprietaryName>Oyster</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>OYSTER</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0336-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0336-5)</PackageDescription>
    <NDC11Code>49288-0336-05</NDC11Code>
    <ProductNDC>49288-0336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Oyster</ProprietaryName>
    <NonProprietaryName>Oyster</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>OYSTER</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-336-05</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-336-05) </PackageDescription>
    <NDC11Code>49643-0336-05</NDC11Code>
    <ProductNDC>49643-336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Hackberry Pollen</ProprietaryName>
    <NonProprietaryName>Celtis Occidentalis</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CELTIS OCCIDENTALIS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-336-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-336-10) </PackageDescription>
    <NDC11Code>49643-0336-10</NDC11Code>
    <ProductNDC>49643-336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Hackberry Pollen</ProprietaryName>
    <NonProprietaryName>Celtis Occidentalis</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CELTIS OCCIDENTALIS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-336-30</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49643-336-30) </PackageDescription>
    <NDC11Code>49643-0336-30</NDC11Code>
    <ProductNDC>49643-336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Hackberry Pollen</ProprietaryName>
    <NonProprietaryName>Celtis Occidentalis</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CELTIS OCCIDENTALIS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>49643-336-50</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-336-50) </PackageDescription>
    <NDC11Code>49643-0336-50</NDC11Code>
    <ProductNDC>49643-336</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Hackberry Pollen</ProprietaryName>
    <NonProprietaryName>Celtis Occidentalis</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740312</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102211</ApplicationNumber>
    <LabelerName>Allermed Laboratories, Inc.</LabelerName>
    <SubstanceName>CELTIS OCCIDENTALIS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19740312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
    <Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-336-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-336-30) </PackageDescription>
    <NDC11Code>50742-0336-30</NDC11Code>
    <ProductNDC>50742-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>3.75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>63539-336-14</NDCCode>
    <PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (63539-336-14) </PackageDescription>
    <NDC11Code>63539-0336-14</NDC11Code>
    <ProductNDC>63539-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cibinqo</ProprietaryName>
    <NonProprietaryName>Abrocitinib</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220224</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213871</ApplicationNumber>
    <LabelerName>U.S. Pharmaceuticals</LabelerName>
    <SubstanceName>ABROCITINIB</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220224</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.</IndicationAndUsage>
    <Description>CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-336-01</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-01) </PackageDescription>
    <NDC11Code>68382-0336-01</NDC11Code>
    <ProductNDC>68382-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide</ProprietaryName>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180725</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203499</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.</IndicationAndUsage>
    <Description>Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&amp;C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&amp;C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-336-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-05) </PackageDescription>
    <NDC11Code>68382-0336-05</NDC11Code>
    <ProductNDC>68382-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide</ProprietaryName>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180725</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203499</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.</IndicationAndUsage>
    <Description>Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&amp;C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&amp;C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-336-06</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-06) </PackageDescription>
    <NDC11Code>68382-0336-06</NDC11Code>
    <ProductNDC>68382-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide</ProprietaryName>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180725</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203499</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.</IndicationAndUsage>
    <Description>Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&amp;C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&amp;C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-336-10</NDCCode>
    <PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-10) </PackageDescription>
    <NDC11Code>68382-0336-10</NDC11Code>
    <ProductNDC>68382-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide</ProprietaryName>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180725</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203499</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.</IndicationAndUsage>
    <Description>Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&amp;C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&amp;C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-336-14</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-14) </PackageDescription>
    <NDC11Code>68382-0336-14</NDC11Code>
    <ProductNDC>68382-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide</ProprietaryName>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180725</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203499</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.</IndicationAndUsage>
    <Description>Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&amp;C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&amp;C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-336-16</NDCCode>
    <PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-16) </PackageDescription>
    <NDC11Code>68382-0336-16</NDC11Code>
    <ProductNDC>68382-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glipizide</ProprietaryName>
    <NonProprietaryName>Glipizide</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180725</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203499</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>GLIPIZIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180725</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.</IndicationAndUsage>
    <Description>Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&amp;C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&amp;C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
</NDCList>