{
"NDC": [
{
"NDCCode": "70518-0346-0",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (70518-0346-0) ",
"NDC11Code": "70518-0346-00",
"ProductNDC": "70518-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loxapine",
"NonProprietaryName": "Loxapine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072204",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LOXAPINE SUCCINATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170321",
"SamplePackage": "N"
},
{
"NDCCode": "15631-0346-0",
"PackageDescription": "100 PELLET in 1 PACKAGE (15631-0346-0) ",
"NDC11Code": "15631-0346-00",
"ProductNDC": "15631-0346",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pix Liquida",
"NonProprietaryName": "Pix Liquida",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150912",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "PINE TAR",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "51514-0346-0",
"PackageDescription": "40 g in 1 TUBE (51514-0346-0) ",
"NDC11Code": "51514-0346-00",
"ProductNDC": "51514-0346",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naked Skin One And Done, Medium Dark",
"NonProprietaryName": "Spf Cream",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160204",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Autumn Harp Inc.",
"SubstanceName": "ZINC OXIDE; OCTINOXATE",
"StrengthNumber": "3.4; 7.5",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160204",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "51927-0346-0",
"PackageDescription": "1 kg in 1 BOTTLE (51927-0346-0) ",
"NDC11Code": "51927-0346-00",
"ProductNDC": "51927-0346",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240702",
"EndMarketingDate": "20301231",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Professional Compounding Centers of America",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "02-JUL-24",
"EndMarketingDatePackage": "31-DEC-30"
},
{
"NDCCode": "0078-0346-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0346-42) > 1 PATCH in 1 POUCH (0078-0346-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0346-42",
"ProductNDC": "0078-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0168-0346-46",
"PackageDescription": "45 g in 1 TUBE, WITH APPLICATOR (0168-0346-46) ",
"NDC11Code": "00168-0346-46",
"ProductNDC": "0168-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terconazole",
"NonProprietaryName": "Terconazole",
"DosageFormName": "CREAM",
"RouteName": "VAGINAL",
"StartMarketingDate": "20050218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076712",
"LabelerName": "E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC",
"SubstanceName": "TERCONAZOLE",
"StrengthNumber": "4",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS]",
"Status": "Active",
"LastUpdate": "2026-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050218",
"SamplePackage": "N",
"IndicationAndUsage": "Terconazole vaginal cream 0.4% is indicated for the local treatment of vulvovaginal candidiasis (moniliasis). As terconazole vaginal cream 0.4% is effective only for vulvovaginitis caused by the genus Candida, the diagnosis should be confirmed by KOH smears and/or cultures.",
"Description": "Terconazole vaginal cream 0.4% is a white to off-white, water washable cream for intravaginal administration containing 0.4% of the antifungal agent terconazole, cis-1-[p-[[2-(2,4-Dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-4-isopropylpiperazine, compounded in a cream base consisting of butylated hydroxyanisole, cetyl alcohol, isopropyl myristate, polysorbate 60, polysorbate 80, propylene glycol, stearyl alcohol, and purified water. The structural formula of terconazole is as follows:. Terconazole, a triazole derivative, is a white to almost white powder with a molecular weight of 532.47. It is insoluble in water; sparingly soluble in ethanol; and soluble in butanol."
},
{
"NDCCode": "16729-346-10",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16729-346-10) ",
"NDC11Code": "16729-0346-10",
"ProductNDC": "16729-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208049",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230220",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies ( 14.1)] . , 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . , 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . .",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3a R,4 S,7 R,7a S)-2-{(1 R,2 R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1-ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2 H-isoindole-1,3-dione hydrochloride. Its molecular formula is C 28H 36N 4O 2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in water, practically insoluble or insoluble in 0.1 N HCl, slightly soluble in ethanol, sparingly soluble in methanol, practically insoluble or insoluble in toluene and very slightly soluble in acetone. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, pregelatinized starch, croscarmellose sodium, hydroxypropyl methyl cellulose, magnesium stearate. Additionally, the 20 mg, 40 mg, 60 mg & 120 mg tablet contains hydroxylpropyl methyl cellulose 2910, talc, polyethylene glycol 6000 & titanium dioxide and 80 mg tablet contains hydroxylpropyl methyl cellulose 2910, titanium dioxide, talc, polyethylene glycol 6000, iron oxide yellow and FD&C Blue #2/indigo carmine aluminium lake."
},
{
"NDCCode": "43547-346-06",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-346-06) ",
"NDC11Code": "43547-0346-06",
"ProductNDC": "43547-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203468",
"LabelerName": "Solco healthcare U.S., LLC",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140501",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam extended-release tablets are indicated for the treatment of partial-onset seizures in patients 12 years of age and older.",
"Description": "Levetiracetam extended-release tablets, USP are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, hydroxypropylcellulose, hypromellose, macrogol/peg 3350, magnesium stearate, polyvinyl alcohol-partially hydrolyzed, talc, and titanium dioxide. FDA approved dissolution test specifications differ from USP. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass."
},
{
"NDCCode": "43547-346-50",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-346-50) ",
"NDC11Code": "43547-0346-50",
"ProductNDC": "43547-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203468",
"LabelerName": "Solco healthcare U.S., LLC",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140501",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam extended-release tablets are indicated for the treatment of partial-onset seizures in patients 12 years of age and older.",
"Description": "Levetiracetam extended-release tablets, USP are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, hydroxypropylcellulose, hypromellose, macrogol/peg 3350, magnesium stearate, polyvinyl alcohol-partially hydrolyzed, talc, and titanium dioxide. FDA approved dissolution test specifications differ from USP. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass."
},
{
"NDCCode": "49288-0346-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0346-1)",
"NDC11Code": "49288-0346-01",
"ProductNDC": "49288-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Oat Pollen",
"NonProprietaryName": "Cultivated Oat Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "AVENA SATIVA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0346-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0346-2)",
"NDC11Code": "49288-0346-02",
"ProductNDC": "49288-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Oat Pollen",
"NonProprietaryName": "Cultivated Oat Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "AVENA SATIVA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0346-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0346-3)",
"NDC11Code": "49288-0346-03",
"ProductNDC": "49288-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Oat Pollen",
"NonProprietaryName": "Cultivated Oat Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "AVENA SATIVA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0346-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0346-4)",
"NDC11Code": "49288-0346-04",
"ProductNDC": "49288-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Oat Pollen",
"NonProprietaryName": "Cultivated Oat Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "AVENA SATIVA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0346-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0346-5)",
"NDC11Code": "49288-0346-05",
"ProductNDC": "49288-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Oat Pollen",
"NonProprietaryName": "Cultivated Oat Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "AVENA SATIVA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49643-346-05",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49643-346-05) ",
"NDC11Code": "49643-0346-05",
"ProductNDC": "49643-346",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Russian Olive Pollen",
"NonProprietaryName": "Elaeagnus Angustifolia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "ELAEAGNUS ANGUSTIFOLIA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-346-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49643-346-10) ",
"NDC11Code": "49643-0346-10",
"ProductNDC": "49643-346",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Russian Olive Pollen",
"NonProprietaryName": "Elaeagnus Angustifolia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "ELAEAGNUS ANGUSTIFOLIA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-346-30",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49643-346-30) ",
"NDC11Code": "49643-0346-30",
"ProductNDC": "49643-346",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Russian Olive Pollen",
"NonProprietaryName": "Elaeagnus Angustifolia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "ELAEAGNUS ANGUSTIFOLIA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-346-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-346-50) ",
"NDC11Code": "49643-0346-50",
"ProductNDC": "49643-346",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Russian Olive Pollen",
"NonProprietaryName": "Elaeagnus Angustifolia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "ELAEAGNUS ANGUSTIFOLIA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "50222-346-02",
"PackageDescription": "2 SYRINGE, GLASS in 1 CARTON (50222-346-02) / 1 mL in 1 SYRINGE, GLASS (50222-346-01) ",
"NDC11Code": "50222-0346-02",
"ProductNDC": "50222-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adbry",
"NonProprietaryName": "Tralokinumab-ldrm",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20220102",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761180",
"LabelerName": "LEO Pharma Inc.",
"SubstanceName": "TRALOKINUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-13 Antagonist [EPC], Interleukin-13 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220102",
"SamplePackage": "N",
"IndicationAndUsage": "ADBRY is indicated for the treatment of moderate-to-severe atopic dermatitis in adults and pediatric patients 12 years of age and older whose disease is not adequately controlled with topical prescription therapies or when those therapies are not advisable. ADBRY can be used with or without topical corticosteroids.",
"Description": "Tralokinumab-ldrm, an interleukin-13 antagonist, is a human IgG4 monoclonal antibody. Tralokinumab-ldrm is produced in mouse myeloma cells by recombinant DNA technology, consists of 1326 amino acids, and has a molecular weight of approximately 147 kilodaltons. ADBRY (tralokinumab-ldrm) injection is a sterile, preservative-free, clear to opalescent, colorless to pale yellow solution for subcutaneous use supplied as either a single-dose prefilled syringe with needle guard in a siliconized Type-1 clear glass syringe or a single-dose autoinjector with a siliconized Type-1 clear glass syringe inside. None of the components of the prefilled syringe, autoinjector or the needle guard are made with natural rubber latex. Each prefilled syringe delivers 150 mg tralokinumab-ldrm in 1 mL and the inactive ingredients: acetic acid (0.3 mg), polysorbate 80 (0.1 mg), sodium acetate trihydrate (6 mg), sodium chloride (5 mg), and Water for Injection, at an approximate pH of 5.5. Each autoinjector delivers 300 mg tralokinumab-ldrm in 2 mL and the inactive ingredients: acetic acid (0.6 mg), polysorbate 80 (0.2 mg), sodium acetate trihydrate (12 mg), sodium chloride (10 mg), and Water for Injection, at an approximate pH of 5.5."
},
{
"NDCCode": "50222-346-04",
"PackageDescription": "2 CARTON in 1 CARTON (50222-346-04) / 2 SYRINGE, GLASS in 1 CARTON (50222-346-22) / 1 mL in 1 SYRINGE, GLASS (50222-346-01) ",
"NDC11Code": "50222-0346-04",
"ProductNDC": "50222-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adbry",
"NonProprietaryName": "Tralokinumab-ldrm",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20220102",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761180",
"LabelerName": "LEO Pharma Inc.",
"SubstanceName": "TRALOKINUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-13 Antagonist [EPC], Interleukin-13 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220102",
"SamplePackage": "N",
"IndicationAndUsage": "ADBRY is indicated for the treatment of moderate-to-severe atopic dermatitis in adults and pediatric patients 12 years of age and older whose disease is not adequately controlled with topical prescription therapies or when those therapies are not advisable. ADBRY can be used with or without topical corticosteroids.",
"Description": "Tralokinumab-ldrm, an interleukin-13 antagonist, is a human IgG4 monoclonal antibody. Tralokinumab-ldrm is produced in mouse myeloma cells by recombinant DNA technology, consists of 1326 amino acids, and has a molecular weight of approximately 147 kilodaltons. ADBRY (tralokinumab-ldrm) injection is a sterile, preservative-free, clear to opalescent, colorless to pale yellow solution for subcutaneous use supplied as either a single-dose prefilled syringe with needle guard in a siliconized Type-1 clear glass syringe or a single-dose autoinjector with a siliconized Type-1 clear glass syringe inside. None of the components of the prefilled syringe, autoinjector or the needle guard are made with natural rubber latex. Each prefilled syringe delivers 150 mg tralokinumab-ldrm in 1 mL and the inactive ingredients: acetic acid (0.3 mg), polysorbate 80 (0.1 mg), sodium acetate trihydrate (6 mg), sodium chloride (5 mg), and Water for Injection, at an approximate pH of 5.5. Each autoinjector delivers 300 mg tralokinumab-ldrm in 2 mL and the inactive ingredients: acetic acid (0.6 mg), polysorbate 80 (0.2 mg), sodium acetate trihydrate (12 mg), sodium chloride (10 mg), and Water for Injection, at an approximate pH of 5.5."
},
{
"NDCCode": "50222-346-92",
"PackageDescription": "2 SYRINGE, GLASS in 1 CARTON (50222-346-92) / 1 mL in 1 SYRINGE, GLASS (50222-346-91) ",
"NDC11Code": "50222-0346-92",
"ProductNDC": "50222-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adbry",
"NonProprietaryName": "Tralokinumab-ldrm",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20220102",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761180",
"LabelerName": "LEO Pharma Inc.",
"SubstanceName": "TRALOKINUMAB",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Interleukin-13 Antagonist [EPC], Interleukin-13 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220102",
"SamplePackage": "N",
"IndicationAndUsage": "ADBRY is indicated for the treatment of moderate-to-severe atopic dermatitis in adults and pediatric patients 12 years of age and older whose disease is not adequately controlled with topical prescription therapies or when those therapies are not advisable. ADBRY can be used with or without topical corticosteroids.",
"Description": "Tralokinumab-ldrm, an interleukin-13 antagonist, is a human IgG4 monoclonal antibody. Tralokinumab-ldrm is produced in mouse myeloma cells by recombinant DNA technology, consists of 1326 amino acids, and has a molecular weight of approximately 147 kilodaltons. ADBRY (tralokinumab-ldrm) injection is a sterile, preservative-free, clear to opalescent, colorless to pale yellow solution for subcutaneous use supplied as either a single-dose prefilled syringe with needle guard in a siliconized Type-1 clear glass syringe or a single-dose autoinjector with a siliconized Type-1 clear glass syringe inside. None of the components of the prefilled syringe, autoinjector or the needle guard are made with natural rubber latex. Each prefilled syringe delivers 150 mg tralokinumab-ldrm in 1 mL and the inactive ingredients: acetic acid (0.3 mg), polysorbate 80 (0.1 mg), sodium acetate trihydrate (6 mg), sodium chloride (5 mg), and Water for Injection, at an approximate pH of 5.5. Each autoinjector delivers 300 mg tralokinumab-ldrm in 2 mL and the inactive ingredients: acetic acid (0.6 mg), polysorbate 80 (0.2 mg), sodium acetate trihydrate (12 mg), sodium chloride (10 mg), and Water for Injection, at an approximate pH of 5.5."
},
{
"NDCCode": "50419-346-05",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-346-05) / 50 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0346-05",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091230",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-10",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-346-10) / 100 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0346-10",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091230",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-15",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-346-15) / 150 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0346-15",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091230",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-20",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-346-20) / 200 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0346-20",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091230",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-26",
"PackageDescription": "10 BOTTLE in 1 PACKAGE (50419-346-26) / 200 mL in 1 BOTTLE (50419-346-32) ",
"NDC11Code": "50419-0346-26",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091230",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-28",
"PackageDescription": "10 BOTTLE in 1 PACKAGE (50419-346-28) / 200 mL in 1 BOTTLE",
"NDC11Code": "50419-0346-28",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180504",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-58",
"PackageDescription": "8 BOTTLE in 1 PACKAGE (50419-346-58) / 500 mL in 1 BOTTLE (50419-346-33) ",
"NDC11Code": "50419-0346-58",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091230",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-65",
"PackageDescription": "8 BOTTLE in 1 PACKAGE (50419-346-65) / 500 mL in 1 BOTTLE",
"NDC11Code": "50419-0346-65",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180504",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
},
{
"NDCCode": "50419-346-91",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (50419-346-91) / 100 mL in 1 VIAL, GLASS",
"NDC11Code": "50419-0346-91",
"ProductNDC": "50419-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultravist",
"NonProprietaryName": "Iopromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRA-ARTERIAL; INTRAVENOUS",
"StartMarketingDate": "20091230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020220",
"LabelerName": "Bayer HealthCare Pharmaceuticals Inc.",
"SubstanceName": "IOPROMIDE",
"StrengthNumber": "370",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161011",
"SamplePackage": "N",
"IndicationAndUsage": "ULTRAVIST® Injection is an iodinated contrast agent indicated for.",
"Description": "ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70518-0346-0</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (70518-0346-0) </PackageDescription>
<NDC11Code>70518-0346-00</NDC11Code>
<ProductNDC>70518-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loxapine</ProprietaryName>
<NonProprietaryName>Loxapine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072204</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LOXAPINE SUCCINATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>15631-0346-0</NDCCode>
<PackageDescription>100 PELLET in 1 PACKAGE (15631-0346-0) </PackageDescription>
<NDC11Code>15631-0346-00</NDC11Code>
<ProductNDC>15631-0346</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pix Liquida</ProprietaryName>
<NonProprietaryName>Pix Liquida</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150912</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>PINE TAR</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51514-0346-0</NDCCode>
<PackageDescription>40 g in 1 TUBE (51514-0346-0) </PackageDescription>
<NDC11Code>51514-0346-00</NDC11Code>
<ProductNDC>51514-0346</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naked Skin One And Done, Medium Dark</ProprietaryName>
<NonProprietaryName>Spf Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160204</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Autumn Harp Inc.</LabelerName>
<SubstanceName>ZINC OXIDE; OCTINOXATE</SubstanceName>
<StrengthNumber>3.4; 7.5</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51927-0346-0</NDCCode>
<PackageDescription>1 kg in 1 BOTTLE (51927-0346-0) </PackageDescription>
<NDC11Code>51927-0346-00</NDC11Code>
<ProductNDC>51927-0346</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240702</StartMarketingDate>
<EndMarketingDate>20301231</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Professional Compounding Centers of America</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>02-JUL-24</StartMarketingDatePackage>
<EndMarketingDatePackage>31-DEC-30</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>0078-0346-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0346-42) > 1 PATCH in 1 POUCH (0078-0346-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0346-42</NDC11Code>
<ProductNDC>0078-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0168-0346-46</NDCCode>
<PackageDescription>45 g in 1 TUBE, WITH APPLICATOR (0168-0346-46) </PackageDescription>
<NDC11Code>00168-0346-46</NDC11Code>
<ProductNDC>0168-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terconazole</ProprietaryName>
<NonProprietaryName>Terconazole</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>VAGINAL</RouteName>
<StartMarketingDate>20050218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076712</ApplicationNumber>
<LabelerName>E. Fougera & Co. a division of Fougera Pharmaceuticals, LLC</LabelerName>
<SubstanceName>TERCONAZOLE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Terconazole vaginal cream 0.4% is indicated for the local treatment of vulvovaginal candidiasis (moniliasis). As terconazole vaginal cream 0.4% is effective only for vulvovaginitis caused by the genus Candida, the diagnosis should be confirmed by KOH smears and/or cultures.</IndicationAndUsage>
<Description>Terconazole vaginal cream 0.4% is a white to off-white, water washable cream for intravaginal administration containing 0.4% of the antifungal agent terconazole, cis-1-[p-[[2-(2,4-Dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-4-isopropylpiperazine, compounded in a cream base consisting of butylated hydroxyanisole, cetyl alcohol, isopropyl myristate, polysorbate 60, polysorbate 80, propylene glycol, stearyl alcohol, and purified water. The structural formula of terconazole is as follows:. Terconazole, a triazole derivative, is a white to almost white powder with a molecular weight of 532.47. It is insoluble in water; sparingly soluble in ethanol; and soluble in butanol.</Description>
</NDC>
<NDC>
<NDCCode>16729-346-10</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16729-346-10) </PackageDescription>
<NDC11Code>16729-0346-10</NDC11Code>
<ProductNDC>16729-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208049</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies ( 14.1)] . , 2 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . , 3 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)] . .</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3a R,4 S,7 R,7a S)-2-{(1 R,2 R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1-ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2 H-isoindole-1,3-dione hydrochloride. Its molecular formula is C 28H 36N 4O 2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in water, practically insoluble or insoluble in 0.1 N HCl, slightly soluble in ethanol, sparingly soluble in methanol, practically insoluble or insoluble in toluene and very slightly soluble in acetone. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, pregelatinized starch, croscarmellose sodium, hydroxypropyl methyl cellulose, magnesium stearate. Additionally, the 20 mg, 40 mg, 60 mg & 120 mg tablet contains hydroxylpropyl methyl cellulose 2910, talc, polyethylene glycol 6000 & titanium dioxide and 80 mg tablet contains hydroxylpropyl methyl cellulose 2910, titanium dioxide, talc, polyethylene glycol 6000, iron oxide yellow and FD&C Blue #2/indigo carmine aluminium lake.</Description>
</NDC>
<NDC>
<NDCCode>43547-346-06</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-346-06) </PackageDescription>
<NDC11Code>43547-0346-06</NDC11Code>
<ProductNDC>43547-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203468</ApplicationNumber>
<LabelerName>Solco healthcare U.S., LLC</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam extended-release tablets are indicated for the treatment of partial-onset seizures in patients 12 years of age and older.</IndicationAndUsage>
<Description>Levetiracetam extended-release tablets, USP are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, hydroxypropylcellulose, hypromellose, macrogol/peg 3350, magnesium stearate, polyvinyl alcohol-partially hydrolyzed, talc, and titanium dioxide. FDA approved dissolution test specifications differ from USP. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
</NDC>
<NDC>
<NDCCode>43547-346-50</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (43547-346-50) </PackageDescription>
<NDC11Code>43547-0346-50</NDC11Code>
<ProductNDC>43547-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203468</ApplicationNumber>
<LabelerName>Solco healthcare U.S., LLC</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam extended-release tablets are indicated for the treatment of partial-onset seizures in patients 12 years of age and older.</IndicationAndUsage>
<Description>Levetiracetam extended-release tablets, USP are an antiepileptic drug available as 500 mg and 750 mg (white) extended-release tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam extended-release tablets, USP contain the labeled amount of levetiracetam, USP. Inactive ingredients: colloidal silicon dioxide, hydroxypropylcellulose, hypromellose, macrogol/peg 3350, magnesium stearate, polyvinyl alcohol-partially hydrolyzed, talc, and titanium dioxide. FDA approved dissolution test specifications differ from USP. The medication is combined with a drug release controlling polymer that provides a drug release at a controlled rate. The biologically inert components of the tablet may occasionally remain intact during GI transit and will be eliminated in the feces as a soft, hydrated mass.</Description>
</NDC>
<NDC>
<NDCCode>49288-0346-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0346-1)</PackageDescription>
<NDC11Code>49288-0346-01</NDC11Code>
<ProductNDC>49288-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Oat Pollen</ProprietaryName>
<NonProprietaryName>Cultivated Oat Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>AVENA SATIVA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0346-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0346-2)</PackageDescription>
<NDC11Code>49288-0346-02</NDC11Code>
<ProductNDC>49288-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Oat Pollen</ProprietaryName>
<NonProprietaryName>Cultivated Oat Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>AVENA SATIVA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0346-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0346-3)</PackageDescription>
<NDC11Code>49288-0346-03</NDC11Code>
<ProductNDC>49288-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Oat Pollen</ProprietaryName>
<NonProprietaryName>Cultivated Oat Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>AVENA SATIVA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0346-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0346-4)</PackageDescription>
<NDC11Code>49288-0346-04</NDC11Code>
<ProductNDC>49288-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Oat Pollen</ProprietaryName>
<NonProprietaryName>Cultivated Oat Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>AVENA SATIVA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0346-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0346-5)</PackageDescription>
<NDC11Code>49288-0346-05</NDC11Code>
<ProductNDC>49288-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Oat Pollen</ProprietaryName>
<NonProprietaryName>Cultivated Oat Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>AVENA SATIVA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49643-346-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-346-05) </PackageDescription>
<NDC11Code>49643-0346-05</NDC11Code>
<ProductNDC>49643-346</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Russian Olive Pollen</ProprietaryName>
<NonProprietaryName>Elaeagnus Angustifolia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>ELAEAGNUS ANGUSTIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-346-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-346-10) </PackageDescription>
<NDC11Code>49643-0346-10</NDC11Code>
<ProductNDC>49643-346</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Russian Olive Pollen</ProprietaryName>
<NonProprietaryName>Elaeagnus Angustifolia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>ELAEAGNUS ANGUSTIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-346-30</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49643-346-30) </PackageDescription>
<NDC11Code>49643-0346-30</NDC11Code>
<ProductNDC>49643-346</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Russian Olive Pollen</ProprietaryName>
<NonProprietaryName>Elaeagnus Angustifolia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>ELAEAGNUS ANGUSTIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-346-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-346-50) </PackageDescription>
<NDC11Code>49643-0346-50</NDC11Code>
<ProductNDC>49643-346</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Russian Olive Pollen</ProprietaryName>
<NonProprietaryName>Elaeagnus Angustifolia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>ELAEAGNUS ANGUSTIFOLIA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>50222-346-02</NDCCode>
<PackageDescription>2 SYRINGE, GLASS in 1 CARTON (50222-346-02) / 1 mL in 1 SYRINGE, GLASS (50222-346-01) </PackageDescription>
<NDC11Code>50222-0346-02</NDC11Code>
<ProductNDC>50222-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adbry</ProprietaryName>
<NonProprietaryName>Tralokinumab-ldrm</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20220102</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761180</ApplicationNumber>
<LabelerName>LEO Pharma Inc.</LabelerName>
<SubstanceName>TRALOKINUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-13 Antagonist [EPC], Interleukin-13 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADBRY is indicated for the treatment of moderate-to-severe atopic dermatitis in adults and pediatric patients 12 years of age and older whose disease is not adequately controlled with topical prescription therapies or when those therapies are not advisable. ADBRY can be used with or without topical corticosteroids.</IndicationAndUsage>
<Description>Tralokinumab-ldrm, an interleukin-13 antagonist, is a human IgG4 monoclonal antibody. Tralokinumab-ldrm is produced in mouse myeloma cells by recombinant DNA technology, consists of 1326 amino acids, and has a molecular weight of approximately 147 kilodaltons. ADBRY (tralokinumab-ldrm) injection is a sterile, preservative-free, clear to opalescent, colorless to pale yellow solution for subcutaneous use supplied as either a single-dose prefilled syringe with needle guard in a siliconized Type-1 clear glass syringe or a single-dose autoinjector with a siliconized Type-1 clear glass syringe inside. None of the components of the prefilled syringe, autoinjector or the needle guard are made with natural rubber latex. Each prefilled syringe delivers 150 mg tralokinumab-ldrm in 1 mL and the inactive ingredients: acetic acid (0.3 mg), polysorbate 80 (0.1 mg), sodium acetate trihydrate (6 mg), sodium chloride (5 mg), and Water for Injection, at an approximate pH of 5.5. Each autoinjector delivers 300 mg tralokinumab-ldrm in 2 mL and the inactive ingredients: acetic acid (0.6 mg), polysorbate 80 (0.2 mg), sodium acetate trihydrate (12 mg), sodium chloride (10 mg), and Water for Injection, at an approximate pH of 5.5.</Description>
</NDC>
<NDC>
<NDCCode>50222-346-04</NDCCode>
<PackageDescription>2 CARTON in 1 CARTON (50222-346-04) / 2 SYRINGE, GLASS in 1 CARTON (50222-346-22) / 1 mL in 1 SYRINGE, GLASS (50222-346-01) </PackageDescription>
<NDC11Code>50222-0346-04</NDC11Code>
<ProductNDC>50222-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adbry</ProprietaryName>
<NonProprietaryName>Tralokinumab-ldrm</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20220102</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761180</ApplicationNumber>
<LabelerName>LEO Pharma Inc.</LabelerName>
<SubstanceName>TRALOKINUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-13 Antagonist [EPC], Interleukin-13 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADBRY is indicated for the treatment of moderate-to-severe atopic dermatitis in adults and pediatric patients 12 years of age and older whose disease is not adequately controlled with topical prescription therapies or when those therapies are not advisable. ADBRY can be used with or without topical corticosteroids.</IndicationAndUsage>
<Description>Tralokinumab-ldrm, an interleukin-13 antagonist, is a human IgG4 monoclonal antibody. Tralokinumab-ldrm is produced in mouse myeloma cells by recombinant DNA technology, consists of 1326 amino acids, and has a molecular weight of approximately 147 kilodaltons. ADBRY (tralokinumab-ldrm) injection is a sterile, preservative-free, clear to opalescent, colorless to pale yellow solution for subcutaneous use supplied as either a single-dose prefilled syringe with needle guard in a siliconized Type-1 clear glass syringe or a single-dose autoinjector with a siliconized Type-1 clear glass syringe inside. None of the components of the prefilled syringe, autoinjector or the needle guard are made with natural rubber latex. Each prefilled syringe delivers 150 mg tralokinumab-ldrm in 1 mL and the inactive ingredients: acetic acid (0.3 mg), polysorbate 80 (0.1 mg), sodium acetate trihydrate (6 mg), sodium chloride (5 mg), and Water for Injection, at an approximate pH of 5.5. Each autoinjector delivers 300 mg tralokinumab-ldrm in 2 mL and the inactive ingredients: acetic acid (0.6 mg), polysorbate 80 (0.2 mg), sodium acetate trihydrate (12 mg), sodium chloride (10 mg), and Water for Injection, at an approximate pH of 5.5.</Description>
</NDC>
<NDC>
<NDCCode>50222-346-92</NDCCode>
<PackageDescription>2 SYRINGE, GLASS in 1 CARTON (50222-346-92) / 1 mL in 1 SYRINGE, GLASS (50222-346-91) </PackageDescription>
<NDC11Code>50222-0346-92</NDC11Code>
<ProductNDC>50222-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adbry</ProprietaryName>
<NonProprietaryName>Tralokinumab-ldrm</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20220102</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761180</ApplicationNumber>
<LabelerName>LEO Pharma Inc.</LabelerName>
<SubstanceName>TRALOKINUMAB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Interleukin-13 Antagonist [EPC], Interleukin-13 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADBRY is indicated for the treatment of moderate-to-severe atopic dermatitis in adults and pediatric patients 12 years of age and older whose disease is not adequately controlled with topical prescription therapies or when those therapies are not advisable. ADBRY can be used with or without topical corticosteroids.</IndicationAndUsage>
<Description>Tralokinumab-ldrm, an interleukin-13 antagonist, is a human IgG4 monoclonal antibody. Tralokinumab-ldrm is produced in mouse myeloma cells by recombinant DNA technology, consists of 1326 amino acids, and has a molecular weight of approximately 147 kilodaltons. ADBRY (tralokinumab-ldrm) injection is a sterile, preservative-free, clear to opalescent, colorless to pale yellow solution for subcutaneous use supplied as either a single-dose prefilled syringe with needle guard in a siliconized Type-1 clear glass syringe or a single-dose autoinjector with a siliconized Type-1 clear glass syringe inside. None of the components of the prefilled syringe, autoinjector or the needle guard are made with natural rubber latex. Each prefilled syringe delivers 150 mg tralokinumab-ldrm in 1 mL and the inactive ingredients: acetic acid (0.3 mg), polysorbate 80 (0.1 mg), sodium acetate trihydrate (6 mg), sodium chloride (5 mg), and Water for Injection, at an approximate pH of 5.5. Each autoinjector delivers 300 mg tralokinumab-ldrm in 2 mL and the inactive ingredients: acetic acid (0.6 mg), polysorbate 80 (0.2 mg), sodium acetate trihydrate (12 mg), sodium chloride (10 mg), and Water for Injection, at an approximate pH of 5.5.</Description>
</NDC>
<NDC>
<NDCCode>50419-346-05</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-346-05) / 50 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0346-05</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-10</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-346-10) / 100 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0346-10</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-15</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-346-15) / 150 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0346-15</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-20</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-346-20) / 200 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0346-20</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-26</NDCCode>
<PackageDescription>10 BOTTLE in 1 PACKAGE (50419-346-26) / 200 mL in 1 BOTTLE (50419-346-32) </PackageDescription>
<NDC11Code>50419-0346-26</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-28</NDCCode>
<PackageDescription>10 BOTTLE in 1 PACKAGE (50419-346-28) / 200 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>50419-0346-28</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-58</NDCCode>
<PackageDescription>8 BOTTLE in 1 PACKAGE (50419-346-58) / 500 mL in 1 BOTTLE (50419-346-33) </PackageDescription>
<NDC11Code>50419-0346-58</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-65</NDCCode>
<PackageDescription>8 BOTTLE in 1 PACKAGE (50419-346-65) / 500 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>50419-0346-65</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
<NDC>
<NDCCode>50419-346-91</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (50419-346-91) / 100 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>50419-0346-91</NDC11Code>
<ProductNDC>50419-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultravist</ProprietaryName>
<NonProprietaryName>Iopromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20091230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020220</ApplicationNumber>
<LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IOPROMIDE</SubstanceName>
<StrengthNumber>370</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTRAVIST® Injection is an iodinated contrast agent indicated for.</IndicationAndUsage>
<Description>ULTRAVIST(iopromide) injection is a nonionic radiographic contrast agent for intra-arterial or intravenous administration. The chemical name for iopromide is N,N'-Bis(2,3-dihydroxypropyl)-2,4,6-triiodo-5-[(methoxyacetyl)amino]-N-methyl- 1,3- benzenedicarboxamide. Iopromide has a molecular weight of 791.12 (iodine content 48.12%). Iopromide has the following structural formula. Each mL contains 623.4 mg or 768.86 mg iopromide (300 mg or 370 mg iodine, respectively) and the following inactive ingredients: 0.1 mg edetate calcium disodium as a stabilizer and 2.42 mg tromethamine as a buffer. It may also contain sodium hydroxide or hydrochloric acid to adjust pH to 7.4 (6.5–8) at 25± 2°C and contains no preservatives. ULTRAVIST is a sterile (sterilized by autoclaving), clear, colorless to slightly yellow, odorless, pyrogen-free aqueous solution and has the following physicochemical properties. ULTRAVIST 300 mg Iodine per mL and 370 mg Iodine per mL have osmolalities respectively 2.1 and 2.7 times that of plasma (285 mOsmol/kg water).</Description>
</NDC>
</NDCList>