RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70518-0630-0</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70518-0630-0) </PackageDescription>
    <NDC11Code>70518-0630-00</NDC11Code>
    <ProductNDC>70518-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Spironolactone</ProprietaryName>
    <NonProprietaryName>Spironolactone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170720</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203512</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>SPIRONOLACTONE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aldosterone Antagonist [EPC],Aldosterone Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170720</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70518-0630-1</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-0630-1) </PackageDescription>
    <NDC11Code>70518-0630-01</NDC11Code>
    <ProductNDC>70518-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Spironolactone</ProprietaryName>
    <NonProprietaryName>Spironolactone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170720</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203512</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>SPIRONOLACTONE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aldosterone Antagonist [EPC],Aldosterone Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190710</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>15631-0630-0</NDCCode>
    <PackageDescription>1 TABLET in 1 BLISTER PACK (15631-0630-0)</PackageDescription>
    <NDC11Code>15631-0630-00</NDC11Code>
    <ProductNDC>15631-0630</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Magnesia Phosphorica</ProprietaryName>
    <NonProprietaryName>Magnesia Phosphorica</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151207</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>46438-0630-0</NDCCode>
    <PackageDescription>25 kg in 1 DRUM (46438-0630-0)</PackageDescription>
    <NDC11Code>46438-0630-00</NDC11Code>
    <ProductNDC>46438-0630</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20130801</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Dipharma Francis Srl</LabelerName>
    <SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2021-01-15</LastUpdate>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>62106-0630-0</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (62106-0630-0)  &gt; 30 mL in 1 BOTTLE, GLASS</PackageDescription>
    <NDC11Code>62106-0630-00</NDC11Code>
    <ProductNDC>62106-0630</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hptp</ProprietaryName>
    <NonProprietaryName>Arnica Montana, Achillea Millefolium, Erigeron Canadensis, Hydrastis Canadensis, Oryctolagus Cuniculus, Sabina, Secale Cornutum</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>SUBLINGUAL</RouteName>
    <StartMarketingDate>20151026</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Seroyal USA</LabelerName>
    <SubstanceName>JUNIPERUS SABINA LEAFY TWIG; CLAVICEPS PURPUREA SCLEROTIUM; ARNICA MONTANA ROOT; ACHILLEA MILLEFOLIUM; CONYZA CANADENSIS; GOLDENSEAL; ORYCTOLAGUS CUNICULUS PITUITARY GLAND; ORYCTOLAGUS CUNICULUS ADRENAL GLAND</SubstanceName>
    <StrengthNumber>8; 8; 6; 6; 6; 6; 10; 10</StrengthNumber>
    <StrengthUnit>[hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2021-07-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Uses. Helps promote and maintain growth and development normal energy levels. Directions. To be taken 20 minutes away from food. Place drops directly under the tongue or into ¼ oz of water. Adults and adolescents (12 years and older): Take 10 drops two to three times daily or as recommended by your healthcare practitioner. Children (under 12 years): Take under the direction of your healthcare practitioner.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>71335-0630-0</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (71335-0630-0) </PackageDescription>
    <NDC11Code>71335-0630-00</NDC11Code>
    <ProductNDC>71335-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valacyclovir</ProprietaryName>
    <NonProprietaryName>Valacyclovir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150525</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203047</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211005</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valacyclovir tablet is a deoxynucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients ( 1.1)  Cold Sores (Herpes Labialis)  Genital Herpes     Treatment in immunocompetent patients (initial or recurrent episode)     Suppression in immunocompetent or HIV-1-infected patients     Reduction of transmission  Herpes Zoster Pediatric Patients ( 1.2)  Cold Sores (Herpes Labialis)  Chickenpox Limitations of Use ( 1.3) The efficacy and safety of valacyclovir tablets have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-1-infected patients.</IndicationAndUsage>
    <Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains 556.0 mg or 1.112 grams of valacyclovir hydrochloride USP equivalent to 500 mg or 1 gm of valacyclovir, respectively, and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&amp;C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L-valine2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula:. Valacyclovir hydrochloride USP (monohydrate) is a white or almost white powder with the molecular formula C 13H 23N 6O 5Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>71684-0630-0</NDCCode>
    <PackageDescription>1 mL in 1 CARTON (71684-0630-0) </PackageDescription>
    <NDC11Code>71684-0630-00</NDC11Code>
    <ProductNDC>71684-0630</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Neomycin And Polymyxin B Sulfates And Dexamethasone Ophthalmic Suspension</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <StartMarketingDate>19960221</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Global Packaging Systems</LabelerName>
    <SubstanceName>NEOMYCIN SULFATE</SubstanceName>
    <StrengthNumber>3.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>21-FEB-96</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>0378-0630-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (0378-0630-01) </PackageDescription>
    <NDC11Code>00378-0630-01</NDC11Code>
    <ProductNDC>0378-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iloperidone</ProprietaryName>
    <NonProprietaryName>Iloperidone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207231</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ILOPERIDONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
    <Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-0630-88</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0630-88)  / 10 TABLET in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00378-0630-88</NDC11Code>
    <ProductNDC>0378-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iloperidone</ProprietaryName>
    <NonProprietaryName>Iloperidone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207231</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ILOPERIDONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
    <Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-0630-91</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (0378-0630-91) </PackageDescription>
    <NDC11Code>00378-0630-91</NDC11Code>
    <ProductNDC>0378-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iloperidone</ProprietaryName>
    <NonProprietaryName>Iloperidone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207231</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ILOPERIDONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
    <Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
  </NDC>
  <NDC>
    <NDCCode>0998-0630-06</NDCCode>
    <PackageDescription>5 mL in 1 BOTTLE, PLASTIC (0998-0630-06) </PackageDescription>
    <NDC11Code>00998-0630-06</NDC11Code>
    <ProductNDC>0998-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Maxitrol</ProprietaryName>
    <NonProprietaryName>Neomycin Sulfate, Polymyxin B Sulfate And Dexamethasone</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>19641115</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050023</ApplicationNumber>
    <LabelerName>Alcon Laboratories, Inc.</LabelerName>
    <SubstanceName>DEXAMETHASONE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
    <StrengthNumber>1; 3.5; 10000</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL; [USP'U]/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19641115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where bacterial infection or a risk of bacterial infection exists. Ocular corticosteroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe where the inherent risk of corticosteroids use in certain infective conjunctivitides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns; or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens: Staphylococcus aureus, Escherichia coli, Haemophilus influenzae, Klebsiella/Enterobacter species, Neisseria species, and Pseudomonas aeruginosa. This product does not provide adequate coverage against: Serratia marcescens and streptococci, including Streptococcus pneumoniae.</IndicationAndUsage>
    <Description>MAXITROL® (neomycin and polymyxin B sulfates and dexamethasone ophthalmic suspension) is a multiple dose anti-infective steroid combination in sterile suspension form for topical application. The chemical structure for the active ingredient, dexamethasone, is. C22H29FO5. Established name: dexamethasone. Chemical name: pregna-1, 4-diene-3, 20-dione, 9-fluoro-11,17, 21-trihydroxy-16-methyl-, (11β, 16α)-. The other active ingredients are neomycin sulfate and polymyxin B sulfate. The structural formula for neomycin sulfate is. Neomycin B (R1=H, R2=CH2NH2). Neomycin C (R1=CH2NH2, R2=H). The structural formula for polymyxin B sulfate is. Each mL of MAXITROL® (neomycin and polymyxin B sulfates and dexamethasone ophthalmic suspension) contains: Actives: neomycin sulfate equivalent to neomycin 3.5 mg, polymyxin B sulfate 10,000 units, dexamethasone 0.1%. Inactives: benzalkonium chloride 0.004% (preservative), hydrochloric acid and/or sodium hydroxide (to adjust pH), hypromellose 2910 0.5%, polysorbate 20, purified water, sodium chloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>24208-630-05</NDCCode>
    <PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (24208-630-05)  &gt; 5 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>24208-0630-05</NDC11Code>
    <ProductNDC>24208-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bepotastine Besilate</ProprietaryName>
    <NonProprietaryName>Bepotastine Besilate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20210528</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA022288</ApplicationNumber>
    <LabelerName>Bausch &amp; Lomb Incorporated</LabelerName>
    <SubstanceName>BEPOTASTINE BESILATE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210528</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bepotastine Besilate Ophthalmic Solution, 1.5% is a histamine H1 receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.</IndicationAndUsage>
    <Description>Bepotastine Besilate Ophthalmic Solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of Bepotastine Besilate Ophthalmic Solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as (+) -4-[[(S)-p-chloro-alpha -2-pyridylbenzyl]oxy]-1-piperidine butyric acid monobenzenesulfonate. The chemical structure for bepotastine besilate is:. Bepotastine besilate is a white to pale yellowish-white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine Besilate Ophthalmic Solution is supplied as a sterile, aqueous 1.5% solution, with an approximate pH of 6.8. The osmolality of Bepotastine Besilate Ophthalmic Solution, 1.5% is approximately 295 mOsm/kg. Each mL of Bepotastine Besilate Ophthalmic Solution, 1.5% contains: : 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine) , 2 Inactives:monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection, USP., 3 Preservative: benzalkonium chloride 0.005%.</Description>
  </NDC>
  <NDC>
    <NDCCode>24208-630-10</NDCCode>
    <PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (24208-630-10)  &gt; 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>24208-0630-10</NDC11Code>
    <ProductNDC>24208-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bepotastine Besilate</ProprietaryName>
    <NonProprietaryName>Bepotastine Besilate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20210528</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA022288</ApplicationNumber>
    <LabelerName>Bausch &amp; Lomb Incorporated</LabelerName>
    <SubstanceName>BEPOTASTINE BESILATE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210528</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bepotastine Besilate Ophthalmic Solution, 1.5% is a histamine H1 receptor antagonist indicated for the treatment of itching associated with signs and symptoms of allergic conjunctivitis.</IndicationAndUsage>
    <Description>Bepotastine Besilate Ophthalmic Solution, 1.5% is a sterile, topically administered drug for ophthalmic use. Each mL of Bepotastine Besilate Ophthalmic Solution contains 15 mg bepotastine besilate. Bepotastine besilate is designated chemically as (+) -4-[[(S)-p-chloro-alpha -2-pyridylbenzyl]oxy]-1-piperidine butyric acid monobenzenesulfonate. The chemical structure for bepotastine besilate is:. Bepotastine besilate is a white to pale yellowish-white crystalline powder. The molecular weight of bepotastine besilate is 547.06 daltons. Bepotastine Besilate Ophthalmic Solution is supplied as a sterile, aqueous 1.5% solution, with an approximate pH of 6.8. The osmolality of Bepotastine Besilate Ophthalmic Solution, 1.5% is approximately 295 mOsm/kg. Each mL of Bepotastine Besilate Ophthalmic Solution, 1.5% contains: : 1 Active: bepotastine besilate 15 mg (equivalent to 10.7 mg bepotastine) , 2 Inactives:monobasic sodium phosphate dihydrate, sodium chloride, sodium hydroxide to adjust pH, and water for injection, USP., 3 Preservative: benzalkonium chloride 0.005%.</Description>
  </NDC>
  <NDC>
    <NDCCode>30698-630-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (30698-630-01) </PackageDescription>
    <NDC11Code>30698-0630-01</NDC11Code>
    <ProductNDC>30698-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bumex</ProprietaryName>
    <NonProprietaryName>Bumetanide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830228</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018225</ApplicationNumber>
    <LabelerName>Validus Pharmaceuticals LLC</LabelerName>
    <SubstanceName>BUMETANIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19830228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bumex tablets are indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with Bumex tablets following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
    <Description>Bumex ®(bumetanide) is a loop diuretic available as 0.5 mg (light green), 1 mg (yellow) and 2 mg (peach) tablets for oral administration; each tablet also contains anhydrous lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc, with the following dye systems: 0.5 mg—D&amp;C Yellow No. 10 aluminum lake and FD&amp;C Blue No. 1 aluminum lake; 1 mg—D&amp;C Yellow No. 10 aluminum lake; 2 mg—red iron oxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder having a calculated molecular weight of 364.42, and the following structural formula. FDA-approved impurity specifications differ from the USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0630-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0630-1)</PackageDescription>
    <NDC11Code>49288-0630-01</NDC11Code>
    <ProductNDC>49288-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bitter Dock</ProprietaryName>
    <NonProprietaryName>Bitter Dock</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>RUMEX OBTUSIFOLIUS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0630-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0630-2)</PackageDescription>
    <NDC11Code>49288-0630-02</NDC11Code>
    <ProductNDC>49288-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bitter Dock</ProprietaryName>
    <NonProprietaryName>Bitter Dock</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>RUMEX OBTUSIFOLIUS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0630-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0630-3)</PackageDescription>
    <NDC11Code>49288-0630-03</NDC11Code>
    <ProductNDC>49288-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bitter Dock</ProprietaryName>
    <NonProprietaryName>Bitter Dock</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>RUMEX OBTUSIFOLIUS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0630-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0630-4)</PackageDescription>
    <NDC11Code>49288-0630-04</NDC11Code>
    <ProductNDC>49288-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bitter Dock</ProprietaryName>
    <NonProprietaryName>Bitter Dock</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>RUMEX OBTUSIFOLIUS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0630-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0630-5)</PackageDescription>
    <NDC11Code>49288-0630-05</NDC11Code>
    <ProductNDC>49288-0630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bitter Dock</ProprietaryName>
    <NonProprietaryName>Bitter Dock</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>RUMEX OBTUSIFOLIUS POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-630-10</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (51759-630-10)  / .35 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0630-10</NDC11Code>
    <ProductNDC>51759-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Uzedy</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230501</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213586</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/.35mL</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>UZEDY is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia in adults. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of bipolar I disorder in adults. (1.2).</IndicationAndUsage>
    <Description>UZEDY contains risperidone, an atypical antipsychotic. Risperidone belongs to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzoxazol-3-yl) piperidin-1yl] ethyl]-2-methyl-6,7,8,9-tetrahydropyrido[1,2-a] pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.5 g/mol. The structural formula is. Risperidone is a white to off-white powder. It is practically insoluble in water and soluble in methanol and 0.1 N HCl. It has the following pKa values: 8.28 (piperidine moiety) and 3.12 (pyrimidine moiety). UZEDY (risperidone) extended-release injectable suspension, for subcutaneous use, is a sterile, preservative free, white to off-white opaque viscous suspension. It is available in the following strengths (and deliverable volumes from a single-dose prefilled syringe): 50 mg (0.14 mL), 75 mg (0.21 mL), 100 mg (0.28 mL), 125 mg (0.35 mL), 150 mg (0.42 mL), 200 mg (0.56 mL), and 250 mg (0.7 mL). The inactive ingredients include dimethyl sulfoxide (45% w/w), methoxy-poly(ethylene glycol)-co-poly(D,L-lactide) (15% w/w), and poly(D,L-lactide)-co-poly(ethylene glycol)-co-poly(D,L-lactide) (10% w/w).</Description>
  </NDC>
  <NDC>
    <NDCCode>51759-630-11</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (51759-630-11)  / .35 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51759-0630-11</NDC11Code>
    <ProductNDC>51759-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Uzedy</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230501</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213586</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/.35mL</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230501</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>UZEDY is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia in adults. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of bipolar I disorder in adults. (1.2).</IndicationAndUsage>
    <Description>UZEDY contains risperidone, an atypical antipsychotic. Risperidone belongs to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzoxazol-3-yl) piperidin-1yl] ethyl]-2-methyl-6,7,8,9-tetrahydropyrido[1,2-a] pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.5 g/mol. The structural formula is. Risperidone is a white to off-white powder. It is practically insoluble in water and soluble in methanol and 0.1 N HCl. It has the following pKa values: 8.28 (piperidine moiety) and 3.12 (pyrimidine moiety). UZEDY (risperidone) extended-release injectable suspension, for subcutaneous use, is a sterile, preservative free, white to off-white opaque viscous suspension. It is available in the following strengths (and deliverable volumes from a single-dose prefilled syringe): 50 mg (0.14 mL), 75 mg (0.21 mL), 100 mg (0.28 mL), 125 mg (0.35 mL), 150 mg (0.42 mL), 200 mg (0.56 mL), and 250 mg (0.7 mL). The inactive ingredients include dimethyl sulfoxide (45% w/w), methoxy-poly(ethylene glycol)-co-poly(D,L-lactide) (15% w/w), and poly(D,L-lactide)-co-poly(ethylene glycol)-co-poly(D,L-lactide) (10% w/w).</Description>
  </NDC>
  <NDC>
    <NDCCode>52959-630-00</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (52959-630-00)</PackageDescription>
    <NDC11Code>52959-0630-00</NDC11Code>
    <ProductNDC>52959-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074869</ApplicationNumber>
    <LabelerName>H.J. Harkins Company, Inc.</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&amp;C Red #30 aluminum lake. The 1 mg tablet also contains D&amp;C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>52959-630-02</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE (52959-630-02)</PackageDescription>
    <NDC11Code>52959-0630-02</NDC11Code>
    <ProductNDC>52959-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074869</ApplicationNumber>
    <LabelerName>H.J. Harkins Company, Inc.</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&amp;C Red #30 aluminum lake. The 1 mg tablet also contains D&amp;C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>52959-630-18</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE (52959-630-18)</PackageDescription>
    <NDC11Code>52959-0630-18</NDC11Code>
    <ProductNDC>52959-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074869</ApplicationNumber>
    <LabelerName>H.J. Harkins Company, Inc.</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&amp;C Red #30 aluminum lake. The 1 mg tablet also contains D&amp;C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>52959-630-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (52959-630-30)</PackageDescription>
    <NDC11Code>52959-0630-30</NDC11Code>
    <ProductNDC>52959-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074869</ApplicationNumber>
    <LabelerName>H.J. Harkins Company, Inc.</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&amp;C Red #30 aluminum lake. The 1 mg tablet also contains D&amp;C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>52959-630-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (52959-630-60)</PackageDescription>
    <NDC11Code>52959-0630-60</NDC11Code>
    <ProductNDC>52959-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074869</ApplicationNumber>
    <LabelerName>H.J. Harkins Company, Inc.</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&amp;C Red #30 aluminum lake. The 1 mg tablet also contains D&amp;C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>52959-630-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (52959-630-90)</PackageDescription>
    <NDC11Code>52959-0630-90</NDC11Code>
    <ProductNDC>52959-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonazepam</ProprietaryName>
    <NonProprietaryName>Clonazepam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074869</ApplicationNumber>
    <LabelerName>H.J. Harkins Company, Inc.</LabelerName>
    <SubstanceName>CLONAZEPAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&amp;C Red #30 aluminum lake. The 1 mg tablet also contains D&amp;C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>61314-630-06</NDCCode>
    <PackageDescription>5 mL in 1 BOTTLE, PLASTIC (61314-630-06) </PackageDescription>
    <NDC11Code>61314-0630-06</NDC11Code>
    <ProductNDC>61314-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Neomycin And Polymyxin B Sulfates And Dexamethasone</ProprietaryName>
    <NonProprietaryName>Neomycin Sulfate, Polymyxin B Sulfate And Dexamethasone</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>19960221</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062341</ApplicationNumber>
    <LabelerName>Sandoz Inc.</LabelerName>
    <SubstanceName>NEOMYCIN SULFATE; POLYMYXIN B SULFATE; DEXAMETHASONE</SubstanceName>
    <StrengthNumber>3.5; 10000; 1</StrengthNumber>
    <StrengthUnit>mg/mL; [USP'U]/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19960221</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where bacterial infection or a risk of bacterial infection exists. Ocular corticosteroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe where the inherent risk of corticosteroids use in certain infective conjunctivides is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns; or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drug in this product is active against the following common bacterial eye pathogens: Staphylococcus aureus, Escherichia coli, Haemophilus influenzae, Klebsiella/Enterobacter species, Neisseria species, and Pseudomonas aeruginosa. This product does not provide adequate coverage against: Serratia marcescens and streptococci, including Streptococcus pneumoniae.</IndicationAndUsage>
    <Description>Neomycin and polymyxin B sulfates and dexamethasone ophthalmic suspension is a multiple dose anti-infective steroid combination in sterile suspension form for topical application. The chemical structure for the active ingredient, dexamethasone, is. MW = 392.45. C22H29FO5. Established name: dexamethasone. Chemical name: pregna-1, 4-diene-3, 20-dione, 9-fluoro-11, 17, 21-trihydroxy-16-methyl-, (11β, 16α)-. The other active ingredients are neomycin sulfate and polymyxin B sulfate. The structural formula for neomycin sulfate is. Neomycin B (R1=H, R2=CH2NH2). Neomycin C (R1=CH2NH2, R2=H). The structural formula for polymyxin B sulfate is. Each mL of Neomycin and Polymyxin B Sulphates and Dexamethasone Ophthalmic Suspension contains: Actives: neomycin sulfate equivalent to neomycin 3.5 mg, polymyxin B sulfate 10,000 units, dexamethasone 0.1%; Preservative: benzalkonium chloride 0.004%; Inactives: hypromellose 2910 0.5%, polysorbate 20, purified water, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH).</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-630-41</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (64980-630-41)  / 4 mL in 1 VIAL, SINGLE-DOSE (64980-630-04) </PackageDescription>
    <NDC11Code>64980-0630-41</NDC11Code>
    <ProductNDC>64980-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Norepinephrine Bitartrate</ProprietaryName>
    <NonProprietaryName>Norepinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218758</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>NOREPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.</IndicationAndUsage>
    <Description>Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is Freely soluble in water (1 in 2.5), slightly soluble in 96% Ethanol (1 in 300), practically insoluble in Chloroform and in Ether. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the containers has been displaced by nitrogen gas.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-630-19</NDCCode>
    <PackageDescription>25 VIAL, PLASTIC in 1 TRAY (65219-630-19)  / 10 mL in 1 VIAL, PLASTIC (65219-630-01) </PackageDescription>
    <NDC11Code>65219-0630-19</NDC11Code>
    <ProductNDC>65219-630</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Gluconate</ProprietaryName>
    <NonProprietaryName>Calcium Gluconate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170615</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA208418</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>98</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.</IndicationAndUsage>
    <Description>Calcium Gluconate Injection, USP is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2OMolecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL). Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
  </NDC>
</NDCList>