RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70518-0632-0</NDCCode>
    <PackageDescription>30 TABLET in 1 BLISTER PACK (70518-0632-0) </PackageDescription>
    <NDC11Code>70518-0632-00</NDC11Code>
    <ProductNDC>70518-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170721</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040362</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-08-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170721</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Hypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis of osteoarthritis Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Systemic dermatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis             Serum sickness            Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Allergic conjunctivitis Keratitis Chorioretinitis Optic neuritis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Loeffler’s syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently  with appropriate antituberculous chemotherapy            Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder.  It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below:. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD &amp; C yellow # 6, aluminum lake, HT 15-18%.</Description>
  </NDC>
  <NDC>
    <NDCCode>70518-0632-1</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE, PLASTIC (70518-0632-1) </PackageDescription>
    <NDC11Code>70518-0632-01</NDC11Code>
    <ProductNDC>70518-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170721</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040362</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-09-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190802</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance) Congenital adrenal hyperplasia Hypercalcemia associated with cancer Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis of osteoarthritis Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of: Systemic lupus erythematosus Systemic dermatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis             Serum sickness            Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Allergic conjunctivitis Keratitis Chorioretinitis Optic neuritis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Loeffler’s syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently  with appropriate antituberculous chemotherapy            Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
    <Description>Prednisone, USP is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to practically white, odorless, crystalline powder.  It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione, 17,21-dihydroxy- and its molecular weight is 358.43 The structural formula is represented below:. Prednisone Tablets, USP are available in 5 strengths: 2.5 mg, 5 mg, 10 mg, 20 mg, and 50 mg. In addition, each tablet contains the following inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD &amp; C yellow # 6, aluminum lake, HT 15-18%.</Description>
  </NDC>
  <NDC>
    <NDCCode>15631-0632-0</NDCCode>
    <PackageDescription>1 TABLET in 1 BLISTER PACK (15631-0632-0)</PackageDescription>
    <NDC11Code>15631-0632-00</NDC11Code>
    <ProductNDC>15631-0632</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Mercurius Corrosivus</ProprietaryName>
    <NonProprietaryName>Mercurius Corrosivus</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151226</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>MERCURIC CHLORIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>38779-0632-0</NDCCode>
    <PackageDescription>10000 g in 1 DRUM (38779-0632-0) </PackageDescription>
    <NDC11Code>38779-0632-00</NDC11Code>
    <ProductNDC>38779-0632</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20140616</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>Medisca Inc.</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-11-21</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>16-JUN-14</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>46438-0632-0</NDCCode>
    <PackageDescription>10 kg in 1 DRUM (46438-0632-0) </PackageDescription>
    <NDC11Code>46438-0632-00</NDC11Code>
    <ProductNDC>46438-0632</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Cilostazol</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20051013</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Dipharma Francis Srl</LabelerName>
    <SubstanceName>CILOSTAZOL</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>13-OCT-05</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>50090-0632-0</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (50090-0632-0) </PackageDescription>
    <NDC11Code>50090-0632-00</NDC11Code>
    <ProductNDC>50090-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19920201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA063181</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Prothrombin Activity [PE], Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Minocycline hydrochloride capsules are indicated in the treatment of the following infections due to susceptible strains of the designated microorganisms. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox and tick fevers caused by rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (Ornithosis) due to Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Nongonococcal urethritis, endocervical, or rectal infections in adults caused by Ureaplasma urealyticum or Chlamydia trachomatis. Relapsing fever due to Borrelia recurrentis. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Minocycline is indicated for the treatment of infections caused by the following gram-negative microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Minocycline hydrochloride capsules are indicated for the treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory tract infections caused by Streptococcus pneumoniae. Skin and skin structure infections caused by Staphylococcus aureus. (Note: Minocycline is not the drug of choice in the treatment of any type of staphylococcal infection.). When penicillin is contraindicated, minocycline is an alternative drug in the treatment of the following infections. Uncomplicated urethritis in men due to Neisseria gonorrhoeae and for the treatment of other gonococcal infections. Infections in women caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum subspecies pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Anthrax due to Bacillus anthracis. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, minocycline may be a useful adjunct to amebicides. In severe acne, minocycline may be useful adjunctive therapy. Oral minocycline is indicated in the treatment of asymptomatic carriers of Neisseria meningitidis to eliminate meningococci from the nasopharynx. In order to preserve the usefulness of minocycline in the treatment of asymptomatic meningococcal carriers, diagnostic laboratory procedures, including serotyping and susceptibility testing, should be performed to establish the carrier state and the correct treatment. It is recommended that the prophylactic use of minocycline be reserved for situations in which the risk of meningococcal meningitis is high. Oral minocycline is not indicated for the treatment of meningococcal infection. Although no controlled clinical efficacy studies have been conducted, limited clinical data show that oral minocycline hydrochloride has been used successfully in the treatment of infections caused by Mycobacterium marinum. To reduce the development of drug-resistant bacteria and maintain the effectiveness of minocycline hydrochloride capsules and other antibacterial drugs, minocycline hydrochloride capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Minocycline hydrochloride, USP is a semisynthetic derivative of tetracycline, 4,7-Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is. C23H27N3O7HCl                      M.W. 493.94. Each Minocycline Hydrochloride Capsule, USP for oral administration, contains the equivalent of 50 mg, 75 mg, or 100 mg of minocycline. In addition each capsule contains the following inactive ingredients: magnesium stearate and starch (corn). The 50 mg, 75 mg, and 100 mg capsule shells contain: D&amp;C Red No. 28, D&amp;C Yellow No. 10, gelatin, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The 100 mg capsule shell also contains black iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>58118-0632-0</NDCCode>
    <PackageDescription>1 CAPSULE in 1 PACKAGE (58118-0632-0)</PackageDescription>
    <NDC11Code>58118-0632-00</NDC11Code>
    <ProductNDC>58118-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluoxetine</ProprietaryName>
    <NonProprietaryName>Fluoxetine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050720</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076990</ApplicationNumber>
    <LabelerName>Clinical Solutions Wholesale</LabelerName>
    <SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2017-02-24</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>58175-0632-0</NDCCode>
    <PackageDescription>1 BAG in 1 DRUM (58175-0632-0)  / 50 kg in 1 BAG</PackageDescription>
    <NDC11Code>58175-0632-00</NDC11Code>
    <ProductNDC>58175-0632</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Naltrexone Hydrochloride</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20190901</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Wavelength Enterprises Ltd.</LabelerName>
    <SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2024-08-08</LastUpdate>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>01-SEP-19</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>62106-0632-0</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (62106-0632-0)  &gt; 30 mL in 1 BOTTLE, GLASS</PackageDescription>
    <NDC11Code>62106-0632-00</NDC11Code>
    <ProductNDC>62106-0632</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Htyp</ProprietaryName>
    <NonProprietaryName>Arsenicum Album, Belladonna, Calcarea Fluorica, Calcarea Sulphurica, Echinacea Angustifolia, Hepar Sulphuris Calcareum, Nux Moschata, Oryctolagus Cuniculus Thymus Gland, Silicea, Sulphur Iodatum</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151130</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Seroyal USA</LabelerName>
    <SubstanceName>ARSENIC TRIOXIDE; ATROPA BELLADONNA WHOLE; CALCIUM FLUORIDE; CALCIUM SULFATE ANHYDROUS; CALCIUM SULFIDE; ECHINACEA, UNSPECIFIED; NUTMEG; ORYCTOLAGUS CUNICULUS THYMUS; SILICON DIOXIDE; SULFUR IODIDE</SubstanceName>
    <StrengthNumber>6; 6; 6; 4; 8; 1; 3; 10; 6; 6</StrengthNumber>
    <StrengthUnit>[hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Food Additives [CS], Increased Coagulation Factor Activity [PE], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151130</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0378-0632-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (0378-0632-01) </PackageDescription>
    <NDC11Code>00378-0632-01</NDC11Code>
    <ProductNDC>0378-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iloperidone</ProprietaryName>
    <NonProprietaryName>Iloperidone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207231</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ILOPERIDONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
    <Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-0632-88</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0632-88)  / 10 TABLET in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00378-0632-88</NDC11Code>
    <ProductNDC>0378-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iloperidone</ProprietaryName>
    <NonProprietaryName>Iloperidone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207231</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ILOPERIDONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
    <Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-0632-91</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (0378-0632-91) </PackageDescription>
    <NDC11Code>00378-0632-91</NDC11Code>
    <ProductNDC>0378-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Iloperidone</ProprietaryName>
    <NonProprietaryName>Iloperidone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207231</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ILOPERIDONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
    <Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
  </NDC>
  <NDC>
    <NDCCode>0713-0632-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0713-0632-15)  / 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>00713-0632-15</NDC11Code>
    <ProductNDC>0713-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluticasone Propionate</ProprietaryName>
    <NonProprietaryName>Fluticasone Propionate</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20060531</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077168</ApplicationNumber>
    <LabelerName>Cosette Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>FLUTICASONE PROPIONATE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluticasone propionate ointment, USP 0.005% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in adult patients.</IndicationAndUsage>
    <Description>Fluticasone propionate ointment, USP 0.005% contains fluticasone propionate [ S-Fluoromethyl 6α, 9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate], a synthetic fluorinated corticosteroid, for topical use. Chemically, fluticasone propionate is C 25H 31F 3O 5S. It has the following structural formula:. Fluticasone propionate has a molecular weight of 500.6. It is a white to off-white powder and is insoluble in water. Each gram of fluticasone propionate ointment contains fluticasone propionate 0.05 mg in a white to off-white translucent ointment base of mineral oil, microcrystalline wax, propylene glycol, and sorbitan sesquioleate.</Description>
  </NDC>
  <NDC>
    <NDCCode>0713-0632-31</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0713-0632-31)  / 30 g in 1 TUBE</PackageDescription>
    <NDC11Code>00713-0632-31</NDC11Code>
    <ProductNDC>0713-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluticasone Propionate</ProprietaryName>
    <NonProprietaryName>Fluticasone Propionate</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20060531</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077168</ApplicationNumber>
    <LabelerName>Cosette Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>FLUTICASONE PROPIONATE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluticasone propionate ointment, USP 0.005% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in adult patients.</IndicationAndUsage>
    <Description>Fluticasone propionate ointment, USP 0.005% contains fluticasone propionate [ S-Fluoromethyl 6α, 9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate], a synthetic fluorinated corticosteroid, for topical use. Chemically, fluticasone propionate is C 25H 31F 3O 5S. It has the following structural formula:. Fluticasone propionate has a molecular weight of 500.6. It is a white to off-white powder and is insoluble in water. Each gram of fluticasone propionate ointment contains fluticasone propionate 0.05 mg in a white to off-white translucent ointment base of mineral oil, microcrystalline wax, propylene glycol, and sorbitan sesquioleate.</Description>
  </NDC>
  <NDC>
    <NDCCode>0713-0632-60</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0713-0632-60)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>00713-0632-60</NDC11Code>
    <ProductNDC>0713-0632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluticasone Propionate</ProprietaryName>
    <NonProprietaryName>Fluticasone Propionate</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20060531</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077168</ApplicationNumber>
    <LabelerName>Cosette Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>FLUTICASONE PROPIONATE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20060531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluticasone propionate ointment, USP 0.005% is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in adult patients.</IndicationAndUsage>
    <Description>Fluticasone propionate ointment, USP 0.005% contains fluticasone propionate [ S-Fluoromethyl 6α, 9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate], a synthetic fluorinated corticosteroid, for topical use. Chemically, fluticasone propionate is C 25H 31F 3O 5S. It has the following structural formula:. Fluticasone propionate has a molecular weight of 500.6. It is a white to off-white powder and is insoluble in water. Each gram of fluticasone propionate ointment contains fluticasone propionate 0.05 mg in a white to off-white translucent ointment base of mineral oil, microcrystalline wax, propylene glycol, and sorbitan sesquioleate.</Description>
  </NDC>
  <NDC>
    <NDCCode>30698-632-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (30698-632-01) </PackageDescription>
    <NDC11Code>30698-0632-01</NDC11Code>
    <ProductNDC>30698-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bumex</ProprietaryName>
    <NonProprietaryName>Bumetanide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830228</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018225</ApplicationNumber>
    <LabelerName>Validus Pharmaceuticals LLC</LabelerName>
    <SubstanceName>BUMETANIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19830228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bumex tablets are indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with Bumex tablets following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
    <Description>Bumex ®(bumetanide) is a loop diuretic available as 0.5 mg (light green), 1 mg (yellow) and 2 mg (peach) tablets for oral administration; each tablet also contains anhydrous lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc, with the following dye systems: 0.5 mg—D&amp;C Yellow No. 10 aluminum lake and FD&amp;C Blue No. 1 aluminum lake; 1 mg—D&amp;C Yellow No. 10 aluminum lake; 2 mg—red iron oxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder having a calculated molecular weight of 364.42, and the following structural formula. FDA-approved impurity specifications differ from the USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>30698-632-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (30698-632-05) </PackageDescription>
    <NDC11Code>30698-0632-05</NDC11Code>
    <ProductNDC>30698-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bumex</ProprietaryName>
    <NonProprietaryName>Bumetanide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19830228</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018225</ApplicationNumber>
    <LabelerName>Validus Pharmaceuticals LLC</LabelerName>
    <SubstanceName>BUMETANIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bumex tablets are indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with Bumex tablets following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
    <Description>Bumex ®(bumetanide) is a loop diuretic available as 0.5 mg (light green), 1 mg (yellow) and 2 mg (peach) tablets for oral administration; each tablet also contains anhydrous lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc, with the following dye systems: 0.5 mg—D&amp;C Yellow No. 10 aluminum lake and FD&amp;C Blue No. 1 aluminum lake; 1 mg—D&amp;C Yellow No. 10 aluminum lake; 2 mg—red iron oxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder having a calculated molecular weight of 364.42, and the following structural formula. FDA-approved impurity specifications differ from the USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-632-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (46708-632-15)  / 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>46708-0632-15</NDC11Code>
    <ProductNDC>46708-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desonide</ProprietaryName>
    <NonProprietaryName>Desonide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20250429</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214396</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>DESONIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250429</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desonide cream, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
    <Description>Desonide cream, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, USP the active ingredient in desonide cream, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is a white to almost white crystalline powder. The solubility of desonide in distilled water saturated with ether is 184 mg/L. Each gram of desonide cream, 0.05% contains 0.5 mg of desonide, USP microdispersed in a base of aluminum sulfate, calcium acetate, cetostearyl alcohol, dextrin, edetate disodium, glycerin, light mineral oil, purified water, sodium lauryl sulfate, white wax, and white petrolatum. Desonide cream, 0.05% is preserved with methylparaben and buffered to pH 4.2 to 5.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-632-60</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (46708-632-60)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>46708-0632-60</NDC11Code>
    <ProductNDC>46708-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desonide</ProprietaryName>
    <NonProprietaryName>Desonide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20250429</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214396</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>DESONIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250429</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desonide cream, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
    <Description>Desonide cream, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, USP the active ingredient in desonide cream, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is a white to almost white crystalline powder. The solubility of desonide in distilled water saturated with ether is 184 mg/L. Each gram of desonide cream, 0.05% contains 0.5 mg of desonide, USP microdispersed in a base of aluminum sulfate, calcium acetate, cetostearyl alcohol, dextrin, edetate disodium, glycerin, light mineral oil, purified water, sodium lauryl sulfate, white wax, and white petrolatum. Desonide cream, 0.05% is preserved with methylparaben and buffered to pH 4.2 to 5.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-632-49</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (47335-632-49)  / 5 AMPULE in 1 POUCH (47335-632-48)  / 2 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>47335-0632-49</NDC11Code>
    <ProductNDC>47335-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Budesonide</ProprietaryName>
    <NonProprietaryName>Budesonide</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20210501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211922</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>BUDESONIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Budesonide is an inhaled corticosteroid indicated for: 1 Maintenance treatment of asthma and as prophylactic therapy in children 12 months to 8 years of age (1).</IndicationAndUsage>
    <Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The molecular formula of budesonide is C25H34O6 and its molecular weight is 430.5 g/mol. Its structural formula is. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water and sparingly soluble in alcohol. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. Budesonide inhalation suspension is a sterile off-white colored aqueous suspension for inhalation via jet nebulizer and contains the active ingredient budesonide USP (micronized), and the inactive ingredients edetate disodium, sodium chloride, sodium citrate, citric acid monohydrate, polysorbate 80, and Water for Injection. Three dose strengths are available in single-dose ampules: 0.25 mg/2 mL, 0.5 mg/2 mL, and 1 mg/2 mL. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitro conditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>52427-632-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (52427-632-30) </PackageDescription>
    <NDC11Code>52427-0632-30</NDC11Code>
    <ProductNDC>52427-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine</ProprietaryName>
    <NonProprietaryName>Venlafaxine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220630</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA215429</ApplicationNumber>
    <LabelerName>Almatica Pharma LLC</LabelerName>
    <SubstanceName>VENLAFAXINE BESYLATE MONOHYDRATE</SubstanceName>
    <StrengthNumber>112.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine Extended-Release Tablets are indicated in adults for the treatment of: 1 Major depressive disorder (MDD) , 2 Generalized Anxiety Disorder (GAD) .</IndicationAndUsage>
    <Description>Venlafaxine Extended-Release Tablets contains venlafaxine, an SNRI, present as venlafaxine besylate monohydrate salt. Venlafaxine besylate monohydrate is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol benzene sulfonate monohydrate or Cyclohexanol, 1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]-, benzenesulfonate, monohydrate and has the molecular formula of C23H33NO5S⸱H2O. Its molecular weight is 453.59. The structural formula is shown as follows. Venlafaxine besylate is a white to almost white crystalline powder, with a solubility of about 32 mg/ml in water. Its octanol:water partition coefficient is 0.154. Drug release is controlled by a combination of diffusion through the extended-release coating and erosion of the core tablets. The modified drug release is pH independent. Venlafaxine Extended-Release Tablets are intended for oral administration and contains 183.95 mg of venlafaxine besylate monohydrate equivalent to 112.5 mg of venlafaxine. Inactive ingredients: ammonio methacrylate copolymer, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, silicon dioxide, simethicone, talc, titanium dioxide, and triacetin. The tablet printing ink is composed of ammonium hydroxide, black iron oxide, n-butyl alcohol, isopropyl alcohol, propylene glycol, and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>55648-632-01</NDCCode>
    <PackageDescription>1 VIAL in 1 VIAL (55648-632-01)  &gt; 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>55648-0632-01</NDC11Code>
    <ProductNDC>55648-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Octreotide Acetate</ProprietaryName>
    <NonProprietaryName>Octreotide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20110511</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090986</ApplicationNumber>
    <LabelerName>Wockhardt Limited</LabelerName>
    <SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Octreotide acetate injection is indicated to reduce blood levels of growth hormone and IGF-I (somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. The goal is to achieve normalization of growth hormone and IGF-I (somatomedin C) levels (see DOSAGE AND ADMINISTRATION). In patients with acromegaly, octreotide acetate reduces growth hormone to within normal ranges in 50% of patients and reduces IGF-I (somatomedin C) to within normal ranges in 50%-60% of patients. Since the effects of pituitary irradiation may not become maximal for several years, adjunctive therapy with octreotide acetate to reduce blood levels of growth hormone and IGF-I (somatomedin C) offers potential benefit before the effects of irradiation are manifested. Improvement in clinical signs and symptoms or reduction in tumor size or rate of growth were not shown in clinical trials performed with octreotide acetate; these trials were not optimally designed to detect such effects.</IndicationAndUsage>
    <Description>Octreotide acetate injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered glacial acetic acid solution for administration by deep subcutaneous (intrafat) or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl) propyl]-, cyclic (2→7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Each mL of single dose vial contains octreotide (as acetate), either 50 mcg (0.05 mg), 100 mcg (0.1 mg) or 500 mcg (0.5 mg) with 7 mg sodium chloride USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. Each mL of multi dose vial contains octreotide (as acetate), either 200 mcg or 1000 mcg with 7 mg sodium chloride USP, 5 mg phenol USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. The molecular weight of octreotide acetate is 1019.3 (free peptide, C49H66N10O10S2) and its amino acid sequence is.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-632-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (62332-632-15)  / 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>62332-0632-15</NDC11Code>
    <ProductNDC>62332-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desonide</ProprietaryName>
    <NonProprietaryName>Desonide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20221208</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214396</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DESONIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221208</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desonide cream USP, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
    <Description>Desonide cream USP, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide cream USP, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is a white to almost white crystalline powder. The solubility of desonide in distilled water saturated with ether is 184 mg/L. Each gram of desonide cream USP, 0.05% contains 0.5 mg of desonide, USP microdispersed in a base of aluminum sulfate, calcium acetate, cetostearyl alcohol, dextrin, edetate disodium, glycerin, light mineral oil, purified water, sodium lauryl sulfate, white wax, and white petrolatum. Desonide cream USP, 0.05% is preserved with methylparaben and buffered to pH 4.2 to 5.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-632-60</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (62332-632-60)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>62332-0632-60</NDC11Code>
    <ProductNDC>62332-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desonide</ProprietaryName>
    <NonProprietaryName>Desonide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20221208</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214396</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DESONIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221208</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desonide cream USP, 0.05% is a low potency corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid responsive dermatoses. It should not be used for longer than two weeks unless directed by a physician.</IndicationAndUsage>
    <Description>Desonide cream USP, 0.05% contains desonide (Pregna-1,4-diene-3,20-dione,11,21-dihydroxy-16,17-[(1-methylethylidene)bis(oxy)]-,(11β,16α)) a synthetic corticosteroid for topical dermatologic use. The corticosteroids constitute a class of primary synthetic steroids used topically as anti-inflammatory and antipruritic agents. Chemically, desonide, the active ingredient in desonide cream USP, 0.05% is C24H32O6. It has the following structural formula. The molecular weight of desonide is 416.51. It is a white to almost white crystalline powder. The solubility of desonide in distilled water saturated with ether is 184 mg/L. Each gram of desonide cream USP, 0.05% contains 0.5 mg of desonide, USP microdispersed in a base of aluminum sulfate, calcium acetate, cetostearyl alcohol, dextrin, edetate disodium, glycerin, light mineral oil, purified water, sodium lauryl sulfate, white wax, and white petrolatum. Desonide cream USP, 0.05% is preserved with methylparaben and buffered to pH 4.2 to 5.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-632-40</NDCCode>
    <PackageDescription>10 BAG in 1 CASE (63323-632-40)  &gt; 1000 mL in 1 BAG (63323-632-10) </PackageDescription>
    <NDC11Code>63323-0632-40</NDC11Code>
    <ProductNDC>63323-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207310</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170919</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-632-75</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (63323-632-75)  &gt; 500 mL in 1 BAG (63323-632-20) </PackageDescription>
    <NDC11Code>63323-0632-75</NDC11Code>
    <ProductNDC>63323-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207310</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170919</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
    <Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>64679-632-01</NDCCode>
    <PackageDescription>1 VIAL in 1 VIAL (64679-632-01)  &gt; 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>64679-0632-01</NDC11Code>
    <ProductNDC>64679-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Octreotide Acetate</ProprietaryName>
    <NonProprietaryName>Octreotide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20110511</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090986</ApplicationNumber>
    <LabelerName>Wockhardt USA LLC.</LabelerName>
    <SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Somatostatin Analog [EPC],Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Octreotide acetate injection is indicated to reduce blood levels of growth hormone and IGF-I (somatomedin C) in acromegaly patients who have had inadequate response to or cannot be treated with surgical resection, pituitary irradiation, and bromocriptine mesylate at maximally tolerated doses. The goal is to achieve normalization of growth hormone and IGF-I (somatomedin C) levels (see DOSAGE AND ADMINISTRATION). In patients with acromegaly, octreotide acetate reduces growth hormone to within normal ranges in 50% of patients and reduces IGF-I (somatomedin C) to within normal ranges in 50%-60% of patients. Since the effects of pituitary irradiation may not become maximal for several years, adjunctive therapy with octreotide acetate to reduce blood levels of growth hormone and IGF-I (somatomedin C) offers potential benefit before the effects of irradiation are manifested. Improvement in clinical signs and symptoms or reduction in tumor size or rate of growth were not shown in clinical trials performed with octreotide acetate; these trials were not optimally designed to detect such effects.</IndicationAndUsage>
    <Description>Octreotide acetate injection, a cyclic octapeptide prepared as a clear sterile solution of octreotide, acetate salt, in a buffered glacial acetic acid solution for administration by deep subcutaneous (intrafat) or intravenous injection. Octreotide acetate, known chemically as L-Cysteinamide, D-phenylalanyl-L-cysteinyl-L-phenylalanyl-D-tryptophyl-L-lysyl-L-threonyl-N-[2-hydroxy-1-(hydroxymethyl) propyl]-, cyclic (2→7)-disulfide; [R-(R*, R*)] acetate salt, is a long-acting octapeptide with pharmacologic actions mimicking those of the natural hormone somatostatin. Each mL of single dose vial contains octreotide (as acetate), either 50 mcg (0.05 mg), 100 mcg (0.1 mg) or 500 mcg (0.5 mg) with 7 mg sodium chloride USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. Each mL of multi dose vial contains octreotide (as acetate), either 200 mcg or 1000 mcg with 7 mg sodium chloride USP, 5 mg phenol USP in water for injection USP. The pH range is between 3.9 and 4.5 buffered with glacial acetic acid USP, sodium acetate trihydrate USP, and it is sealed under nitrogen NF. The molecular weight of octreotide acetate is 1019.3 (free peptide, C49H66N10O10S2) and its amino acid sequence is.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-632-10</NDCCode>
    <PackageDescription>24 BAG in 1 CASE (65219-632-10)  / 100 mL in 1 BAG (65219-632-02) </PackageDescription>
    <NDC11Code>65219-0632-10</NDC11Code>
    <ProductNDC>65219-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20241210</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212808</ApplicationNumber>
    <LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ropivacaine Hydrochloride is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia : epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management : epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>Ropivacaine hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.0 mg, of Ropivacaine Hydrochloride (equivalent to 2.1 mg, ropivacaine hydrochloride monohydrate), and 8.6 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>65219-632-20</NDCCode>
    <PackageDescription>24 BAG in 1 CASE (65219-632-20)  / 200 mL in 1 BAG (65219-632-04) </PackageDescription>
    <NDC11Code>65219-0632-20</NDC11Code>
    <ProductNDC>65219-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20241210</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212808</ApplicationNumber>
    <LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ropivacaine Hydrochloride is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia : epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management : epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>Ropivacaine hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine hydrochloride Injection, USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine hydrochloride injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.0 mg, of Ropivacaine Hydrochloride (equivalent to 2.1 mg, ropivacaine hydrochloride monohydrate), and 8.6 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>65862-632-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (65862-632-05) </PackageDescription>
    <NDC11Code>65862-0632-05</NDC11Code>
    <ProductNDC>65862-632</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pravastatin Sodium</ProprietaryName>
    <NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170202</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203367</ApplicationNumber>
    <LabelerName>Aurobindo Pharma Limited</LabelerName>
    <SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pravastatin sodium tablets are indicated: 1 To reduce the risk of myocardial infarction, myocardial revascularization procedures, and cardiovascular mortality in adults with elevated low-density lipoprotein cholesterol (LDL-C) without clinically evident coronary heart disease (CHD)., 2 To reduce the risk of coronary death, myocardial infarction, myocardial revascularization procedures, stroke or transient ischemic attack, and slow the progression of coronary atherosclerosis in adults with clinically evident CHD., 3 As an adjunct to diet to reduce LDL-C in adults with primary hyperlipidemia., 4 As an adjunct to diet to reduce LDL-C in pediatric patients ages 8 years and older with heterozygous familial hypercholesterolemia (HeFH)., 5 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia.Hypertriglyceridemia. .</IndicationAndUsage>
    <Description>Pravastatin sodium, USP is a statin, an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Pravastatin sodium, USP is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8a-hexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-, monosodium salt, [1S-[1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula. Pravastatin sodium, USP is a white to yellowish white hygroscopic powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is soluble in methanol and water (&gt;300 mg/mL), slightly soluble in isopropanol, and practically insoluble in acetone, acetonitrile, chloroform, and ether. Pravastatin sodium tablets, USP for oral use contain 10 mg, 20 mg, 40 mg, and 80 mg pravastatin sodium, which is equivalent to 9.485 mg, 18.97 mg, 37.94 mg and 75.88 mg of pravastatin, respectively. Inactive ingredients include: croscarmellose sodium, heavy magnesium oxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and povidone. In addition, 10 mg, 40 mg and 80 mg tablets contain yellow ferric oxide.</Description>
  </NDC>
</NDCList>