RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70700-275-22</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (70700-275-22) </PackageDescription>
    <NDC11Code>70700-0275-22</NDC11Code>
    <ProductNDC>70700-275</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol Valerate</ProprietaryName>
    <NonProprietaryName>Estradiol Valerate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20230501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216656</ApplicationNumber>
    <LabelerName>Xiromed, LLC</LabelerName>
    <SubstanceName>ESTRADIOL VALERATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol valerate injection, USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure., 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).</IndicationAndUsage>
    <Description>Estradiol valerate injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 905 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative), and 733 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol, and 525 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula.            C 23H 32O 3 MW 356.50.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-165-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (70700-165-25)  / 1 mL in 1 VIAL (70700-165-22) </PackageDescription>
    <NDC11Code>70700-0165-25</NDC11Code>
    <ProductNDC>70700-165</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212612</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In AnesthesiaGlycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.In Peptic UlcerFor use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains:Glycopyrrolate, USP................0.2 mgWater for Injection, USP..........q.s.Benzyl Alcohol, NF...................0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.For Intramuscular (IM) or Intravenous (IV) administration.Glycopyrrolate is a quaternary ammonium salt with the following chemical name:3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33.Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether.Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-166-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (70700-166-25)  / 2 mL in 1 VIAL (70700-166-22) </PackageDescription>
    <NDC11Code>70700-0166-25</NDC11Code>
    <ProductNDC>70700-166</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212612</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In AnesthesiaGlycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.In Peptic UlcerFor use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains:Glycopyrrolate, USP................0.2 mgWater for Injection, USP..........q.s.Benzyl Alcohol, NF...................0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.For Intramuscular (IM) or Intravenous (IV) administration.Glycopyrrolate is a quaternary ammonium salt with the following chemical name:3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33.Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether.Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-167-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (70700-167-25)  / 5 mL in 1 VIAL (70700-167-22) </PackageDescription>
    <NDC11Code>70700-0167-25</NDC11Code>
    <ProductNDC>70700-167</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212612</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In AnesthesiaGlycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.In Peptic UlcerFor use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains:Glycopyrrolate, USP................0.2 mgWater for Injection, USP..........q.s.Benzyl Alcohol, NF...................0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.For Intramuscular (IM) or Intravenous (IV) administration.Glycopyrrolate is a quaternary ammonium salt with the following chemical name:3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33.Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether.Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-168-23</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70700-168-23)  / 20 mL in 1 VIAL (70700-168-22) </PackageDescription>
    <NDC11Code>70700-0168-23</NDC11Code>
    <ProductNDC>70700-168</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20200909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212612</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In AnesthesiaGlycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.In Peptic UlcerFor use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains:Glycopyrrolate, USP................0.2 mgWater for Injection, USP..........q.s.Benzyl Alcohol, NF...................0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.For Intramuscular (IM) or Intravenous (IV) administration.Glycopyrrolate is a quaternary ammonium salt with the following chemical name:3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33.Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether.Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-169-22</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70700-169-22)  / 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70700-0169-22</NDC11Code>
    <ProductNDC>70700-169</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Irinotecan Hydrochloide</ProprietaryName>
    <NonProprietaryName>Irinotecan Hydrochloide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20191118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212993</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>IRINOTECAN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Irinotecan hydrochloride injection is indicated as a component of first-line therapy in combination with 5-fluorouracil (5-FU) and leucovorin (LV) for patients with metastatic carcinoma of the colon or rectum. Irinotecan hydrochloride injection is indicated for patients with metastatic carcinoma of the colon or rectum whose disease has recurred or progressed following initial fluorouracil-based therapy.</IndicationAndUsage>
    <Description>Irinotecan hydrochloride injection, USP is an antineoplastic agent of the topoisomerase I inhibitor class. Irinotecan hydrochloride injection, USP is supplied as a sterile, pale yellow, clear, aqueous solution. Each milliliter of solution contains 20 mg of irinotecan hydrochloride (on the basis of the trihydrate salt), 45 mg of sorbitol, NF, and 0.9 mg of lactic acid, USP. The pH of the solution has been adjusted to 3.5 (range, 3.0 to 3.8) with sodium hydroxide or hydrochloric acid. Irinotecan hydrochloride injection, USP is intended for dilution with 5% Dextrose Injection, USP (D5W), or 0.9% Sodium Chloride Injection, USP, prior to intravenous infusion. The preferred diluent is 5% Dextrose Injection, USP.  Irinotecan hydrochloride is a semisynthetic derivative of camptothecin, an alkaloid extract from plants such as Camptotheca acuminataor is chemically synthesized. The chemical name is ( S)-4,11-diethyl-3,4,12,14-tetrahydro-4-hydroxy-3,14-dioxo1 H-pyrano[3’,4’:6,7]-indolizino[1,2-b]quinolin-9-yl-[1,4’bipiperidine]-1’-carboxylate, monohydrochloride, trihydrate. Its empirical formula is C 33H 38N 4O 6HCl3H 2O and molecular weight is 677.19. It is slightly soluble in water and organic solvents. Its structural formula is as follows:.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-170-22</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70700-170-22)  / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70700-0170-22</NDC11Code>
    <ProductNDC>70700-170</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Irinotecan Hydrochloride</ProprietaryName>
    <NonProprietaryName>Irinotecan Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20191118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212993</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>IRINOTECAN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Irinotecan hydrochloride injection is indicated as a component of first-line therapy in combination with 5-fluorouracil (5-FU) and leucovorin (LV) for patients with metastatic carcinoma of the colon or rectum. Irinotecan hydrochloride injection is indicated for patients with metastatic carcinoma of the colon or rectum whose disease has recurred or progressed following initial fluorouracil-based therapy.</IndicationAndUsage>
    <Description>Irinotecan hydrochloride injection, USP is an antineoplastic agent of the topoisomerase I inhibitor class. Irinotecan hydrochloride injection, USP is supplied as a sterile, pale yellow, clear, aqueous solution. Each milliliter of solution contains 20 mg of irinotecan hydrochloride (on the basis of the trihydrate salt), 45 mg of sorbitol, NF, and 0.9 mg of lactic acid, USP. The pH of the solution has been adjusted to 3.5 (range, 3.0 to 3.8) with sodium hydroxide or hydrochloric acid. Irinotecan hydrochloride injection, USP is intended for dilution with 5% Dextrose Injection, USP (D5W), or 0.9% Sodium Chloride Injection, USP, prior to intravenous infusion. The preferred diluent is 5% Dextrose Injection, USP.  Irinotecan hydrochloride is a semisynthetic derivative of camptothecin, an alkaloid extract from plants such as Camptotheca acuminataor is chemically synthesized. The chemical name is ( S)-4,11-diethyl-3,4,12,14-tetrahydro-4-hydroxy-3,14-dioxo1 H-pyrano[3’,4’:6,7]-indolizino[1,2-b]quinolin-9-yl-[1,4’bipiperidine]-1’-carboxylate, monohydrochloride, trihydrate. Its empirical formula is C 33H 38N 4O 6HCl3H 2O and molecular weight is 677.19. It is slightly soluble in water and organic solvents. Its structural formula is as follows:.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-171-22</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (70700-171-22)  / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>70700-0171-22</NDC11Code>
    <ProductNDC>70700-171</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
    <NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212968</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Neostigmine Methylsulfate Injection is a cholinesterase inhibitor indicated for the reversal of the effects of non­ depolarizing neuromuscular blocking agents after surgery.</IndicationAndUsage>
    <Description>Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is. Neostigmine methylsulfate is a white powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection.  The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-172-22</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (70700-172-22)  / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>70700-0172-22</NDC11Code>
    <ProductNDC>70700-172</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
    <NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212968</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Neostigmine Methylsulfate Injection is a cholinesterase inhibitor indicated for the reversal of the effects of non­ depolarizing neuromuscular blocking agents after surgery.</IndicationAndUsage>
    <Description>Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is. Neostigmine methylsulfate is a white powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection.  The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-173-22</NDCCode>
    <PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (70700-173-22)  / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
    <NDC11Code>70700-0173-22</NDC11Code>
    <ProductNDC>70700-173</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tobramycin</ProprietaryName>
    <NonProprietaryName>Tobramycin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210712</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211189</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
    <StrengthNumber>1.2</StrengthNumber>
    <StrengthUnit>g/30mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210712</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tobramycin is indicated for the treatment of serious bacterial infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Septicemia in the neonate, child, and adult caused by P. aeruginosa, E. coli, and Klebsiellasp. Lower respiratory tract infections caused by P. aeruginosa, Klebsiellasp, Enterobactersp, Serratiasp, E. coli, and S. aureus(penicillinase and non-penicillinase-producing strains). Serious central-nervous-system infections (meningitis) caused by susceptible organisms. Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiellasp, and Enterobactersp. Skin, bone, and skin structure infections caused by P. aeruginosa, Proteus sp, E. coli, Klebsiellasp, Enterobactersp, and S. aureus. Complicated and recurrent urinary tract infections caused by P. aeruginosa, Proteussp, (indole-positive and indole- negative), E. coli, Klebsiellasp, Enterobactersp, Serratiasp, S. aureus, Providenciasp, and Citrobactersp. Aminoglycosides, including tobramycin sulphate, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are not susceptible to antibiotics having less potential toxicity. Tobramycin may be considered in serious staphylococcal infections when penicillin or other potentially less toxic drugs are contraindicated and when bacterial susceptibility testing and clinical judgment indicate its use. Bacterial cultures should be obtained prior to and during treatment to isolate and identify etiologic organisms and to test their susceptibility to tobramycin. If susceptibility tests show that the causative organisms are resistant to tobramycin, other appropriate therapy should be instituted. In patients in whom a serious life-threatening gram- negative infection is suspected, including those in whom concurrent therapy with a penicillin or cephalosporin and an aminoglycoside may be indicated, treatment with tobramycin sulphate may be initiated before the results of susceptibility studies are obtained. The decision to continue therapy with tobramycin should be based on the results of susceptibility studies, the severity of the infection, and the important additional concepts discussed in the WARNINGSbox above. To reduce the development of drug-resistant bacteria and maintain the effectiveness of tobramycin and other antibacterial drugs, tobramycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antimicrobial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Tobramycin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from the actinomycete Streptomyces tenebrarius. Sterile tobramycin sulfate is supplied as a sterile dry powder and is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Sulfuric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH. Each vial contains tobramycin sulfate equivalent to 1200 mg of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)- O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine (2:5) (salt) and has the chemical formula (C 18H 37N 5O 9) 2 5H 2SO 4. The molecular weight is 1,425.39. The structural formula for tobramycin is as follows:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture service and are restricted to the preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION, Directions for proper use of Pharmacy Bulk Package).</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-174-22</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (70700-174-22)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70700-0174-22</NDC11Code>
    <ProductNDC>70700-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel</ProprietaryName>
    <NonProprietaryName>Docetaxel</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20211025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213510</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
    <Description>Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300, NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-175-22</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (70700-175-22)  &gt; 8 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>70700-0175-22</NDC11Code>
    <ProductNDC>70700-175</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel</ProprietaryName>
    <NonProprietaryName>Docetaxel</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20211025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213510</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
    <Description>Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300, NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-176-22</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (70700-176-22)  &gt; 16 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>70700-0176-22</NDC11Code>
    <ProductNDC>70700-176</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel</ProprietaryName>
    <NonProprietaryName>Docetaxel</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20211025</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213510</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Docetaxel Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
    <Description>Docetaxel, USP is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white, crystalline powder with an empirical formula of C43H53NO14 and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous) USP, 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid, USP 23% v/v, dehydrated alcohol, USP and polyethylene glycol 300, NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-186-23</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70700-186-23)  / 10 mL in 1 VIAL (70700-186-22) </PackageDescription>
    <NDC11Code>70700-0186-23</NDC11Code>
    <ProductNDC>70700-186</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210813</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210123</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210813</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fluorouracil injection USP, a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is: Molecular formula: C 4H 3FN 2O 2       Molecular weight  : 130.08.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-187-23</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70700-187-23)  / 20 mL in 1 VIAL (70700-187-22) </PackageDescription>
    <NDC11Code>70700-0187-23</NDC11Code>
    <ProductNDC>70700-187</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210813</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210123</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210813</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fluorouracil injection USP, a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 10 mL and 20 mL, a sterile preparation that contains single dose vial for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is: Molecular formula: C 4H 3FN 2O 2       Molecular weight  : 130.08.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-188-22</NDCCode>
    <PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (70700-188-22)  / 50 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
    <NDC11Code>70700-0188-22</NDC11Code>
    <ProductNDC>70700-188</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210813</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210124</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210813</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fluorouracil injection USP, a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 50 mL and 100 mL pharmacy bulk package, a sterile preparation that contains doses for multiple patients for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. Molecular formula: C 4H 3FN 2O2 Molecular weight  : 130.08 g/mole.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-189-22</NDCCode>
    <PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (70700-189-22)  / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
    <NDC11Code>70700-0189-22</NDC11Code>
    <ProductNDC>70700-189</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210813</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210124</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210813</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fluorouracil injection USP, a nucleoside metabolic inhibitor, is a colorless to faint yellow, aqueous, sterile, nonpyrogenic injectable solution available in 50 mL and 100 mL pharmacy bulk package, a sterile preparation that contains doses for multiple patients for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. Molecular formula: C 4H 3FN 2O2 Molecular weight  : 130.08 g/mole.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-264-22</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70700-264-22)  / 1 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70700-0264-22</NDC11Code>
    <ProductNDC>70700-264</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate 1ml</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180803</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212227</ApplicationNumber>
    <LabelerName>XIROMED LLC</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug- induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mgWater for Injection, USP q.s.Benzyl Alcohol, NF 0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3                                MW 398.33Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0– 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-273-22</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (70700-273-22) </PackageDescription>
    <NDC11Code>70700-0273-22</NDC11Code>
    <ProductNDC>70700-273</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol Valerate</ProprietaryName>
    <NonProprietaryName>Estradiol Valerate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20230501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216656</ApplicationNumber>
    <LabelerName>Xiromed, LLC</LabelerName>
    <SubstanceName>ESTRADIOL VALERATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol valerate injection, USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure., 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).</IndicationAndUsage>
    <Description>Estradiol valerate injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 905 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative), and 733 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol, and 525 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula.            C 23H 32O 3 MW 356.50.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-274-22</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (70700-274-22) </PackageDescription>
    <NDC11Code>70700-0274-22</NDC11Code>
    <ProductNDC>70700-274</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol Valerate</ProprietaryName>
    <NonProprietaryName>Estradiol Valerate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20230501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216656</ApplicationNumber>
    <LabelerName>Xiromed, LLC</LabelerName>
    <SubstanceName>ESTRADIOL VALERATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol valerate injection, USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure., 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only).</IndicationAndUsage>
    <Description>Estradiol valerate injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg estradiol valerate in a vehicle containing 5 mg chlorobutanol (chloral derivative/preservative) and 905 mg sesame oil; 20 mg estradiol valerate in a vehicle containing 224 mg benzyl benzoate, 20 mg benzyl alcohol (preservative), and 733 mg castor oil; 40 mg estradiol valerate in a vehicle containing 447 mg benzyl benzoate, 20 mg benzyl alcohol, and 525 mg castor oil. Estradiol valerate is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula.            C 23H 32O 3 MW 356.50.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-278-97</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (70700-278-97)  *  10 mL in 1 VIAL, SINGLE-DOSE (70700-277-22)  *  10 mL in 1 VIAL, SINGLE-DOSE (70700-276-96) </PackageDescription>
    <NDC11Code>70700-0278-97</NDC11Code>
    <ProductNDC>70700-278</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
    <NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20210106</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210947</ApplicationNumber>
    <LabelerName>Xiromed, LLC</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
    <Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6.0 mL, ethanol (96%) 0.52 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-286-22</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (70700-286-22) </PackageDescription>
    <NDC11Code>70700-0286-22</NDC11Code>
    <ProductNDC>70700-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Progesterone</ProprietaryName>
    <NonProprietaryName>Progesterone</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20220329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215634</ApplicationNumber>
    <LabelerName>XIROMED, LLC</LabelerName>
    <SubstanceName>PROGESTERONE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Progesterone [CS], Progesterone [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>This drug is indicated in amenorrhea and abnormal uterine bleeding due to hormonal imbalance in the absence of organic pathology, such as submucous fibroids or uterine cancer.</IndicationAndUsage>
    <Description>Progesterone injection, a progestin, is a sterile solution of progesterone in a suitable vegetable oil available for intramuscular use. Progesterone occurs as a white or creamy white, crystalline powder. It is odorless and is stable in air. Practically insoluble in water, it is soluble in alcohol, acetone, and dioxane and sparingly soluble in vegetable oils. It has the following structural formula. C21H30O2           M.W. 314.47. Pregn-4-ene-3, 20-dione. Each mL contains: Progesterone 50 mg, Benzyl Alcohol 10% as preservative in Sesame Oil q.s.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-288-22</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70700-288-22)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70700-0288-22</NDC11Code>
    <ProductNDC>70700-288</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Testosterone Cypionate</ProprietaryName>
    <NonProprietaryName>Testosterone Cypionate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20230428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215351</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>TESTOSTERONE CYPIONATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-08-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230428</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Testosterone Cypionate Injection is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency or absence of endogenous testosterone. 1. Primary hypogonadism (congenital or acquired)-testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy. 2. Hypogonadotropic hypogonadism (congenital or acquired) - gonadotropin or LHRH deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation. Safety and efficacy of Testosterone Cypionate Injection in men with "age-related hypogonadism" (also referred to as "late-onset hypogonadism") have not been established.</IndicationAndUsage>
    <Description>Testosterone Cypionate Injection, USP, for intramuscular injection, contains testosterone cypionate which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone cypionate is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for testosterone cypionate is androst-4-en-3-one, 17-(3-cyclopentyl-1-oxopropoxy)-, (17β)-. Its molecular formula is C 27H 40O 3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in two strengths, 100 mg/mL and 200 mg/mL testosterone cypionate.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-289-22</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70700-289-22)  / 1 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70700-0289-22</NDC11Code>
    <ProductNDC>70700-289</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Testosterone Cypionate</ProprietaryName>
    <NonProprietaryName>Testosterone Cypionate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20230428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215351</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>TESTOSTERONE CYPIONATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-08-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230428</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Testosterone Cypionate Injection is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency or absence of endogenous testosterone. 1. Primary hypogonadism (congenital or acquired)-testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy. 2. Hypogonadotropic hypogonadism (congenital or acquired) - gonadotropin or LHRH deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation. Safety and efficacy of Testosterone Cypionate Injection in men with "age-related hypogonadism" (also referred to as "late-onset hypogonadism") have not been established.</IndicationAndUsage>
    <Description>Testosterone Cypionate Injection, USP, for intramuscular injection, contains testosterone cypionate which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone cypionate is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for testosterone cypionate is androst-4-en-3-one, 17-(3-cyclopentyl-1-oxopropoxy)-, (17β)-. Its molecular formula is C 27H 40O 3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in two strengths, 100 mg/mL and 200 mg/mL testosterone cypionate.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-290-22</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70700-290-22)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70700-0290-22</NDC11Code>
    <ProductNDC>70700-290</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Testosterone Cypionate</ProprietaryName>
    <NonProprietaryName>Testosterone Cypionate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20230428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215351</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>TESTOSTERONE CYPIONATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Androgen Receptor Agonists [MoA], Androgen [EPC], Androstanes [CS]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-08-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230428</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Testosterone Cypionate Injection is indicated for replacement therapy in the male in conditions associated with symptoms of deficiency or absence of endogenous testosterone. 1. Primary hypogonadism (congenital or acquired)-testicular failure due to cryptorchidism, bilateral torsion, orchitis, vanishing testis syndrome; or orchidectomy. 2. Hypogonadotropic hypogonadism (congenital or acquired) - gonadotropin or LHRH deficiency, or pituitary-hypothalamic injury from tumors, trauma, or radiation. Safety and efficacy of Testosterone Cypionate Injection in men with "age-related hypogonadism" (also referred to as "late-onset hypogonadism") have not been established.</IndicationAndUsage>
    <Description>Testosterone Cypionate Injection, USP, for intramuscular injection, contains testosterone cypionate which is the oil-soluble 17 (beta)- cyclopentylpropionate ester of the androgenic hormone testosterone. Testosterone cypionate is a white or creamy white crystalline powder, odorless or nearly so and stable in air. It is insoluble in water, freely soluble in alcohol, chloroform, dioxane, ether, and soluble in vegetable oils. The chemical name for testosterone cypionate is androst-4-en-3-one, 17-(3-cyclopentyl-1-oxopropoxy)-, (17β)-. Its molecular formula is C 27H 40O 3, and the molecular weight 412.61. The structural formula is represented below. Testosterone Cypionate Injection, USP is available in two strengths, 100 mg/mL and 200 mg/mL testosterone cypionate.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-315-22</NDCCode>
    <PackageDescription>1 mL in 1 CONTAINER (70700-315-22) </PackageDescription>
    <NDC11Code>70700-0315-22</NDC11Code>
    <ProductNDC>70700-315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Medroxyprogesterone Acetate</ProprietaryName>
    <NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20240312</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210227</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-07-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Medroxyprogesterone acetate injectable suspension is indicated for use by females of reproductive potential to prevent pregnancy. Limitations of Use. The use of medroxyprogesterone acetate injectable suspension is not recommended as a long-term (i.e., longer than 2 years) birth control method unless other options are considered inadequate [see Dosage and Administration (2.1)and Warnings and Precautions (5.1)].</IndicationAndUsage>
    <Description>Medroxyprogesterone acetate injectable suspension, USP contains medroxyprogesterone acetate, USP a derivative of progesterone, as its active ingredient. Medroxyprogesterone acetate, USP is active by the parenteral and oral routes of administration. It is a white to off-white; odorless crystalline powder that is stable in air and that melts between 205°C and 209°C. It is freely soluble in chloroform, soluble in acetone and dioxane, sparingly soluble in alcohol and methanol, slightly soluble in ether, and insoluble in water. The chemical name for medroxyprogesterone acetate, USP is Pregn-4-ene-3,20-dione,17-(acetyloxy)-6-methyl-, (6α)-17- Hydroxy-6α-methylpregn-4-ene-3,20-dione acetate. The structural formula is as follows. Medroxyprogesterone acetate injectable suspension, USP for IM injection is available in vials containing 1 mL of medroxyprogesterone acetate, USP sterile aqueous suspension 150 mg/mL. For medroxyprogesterone acetate injectable suspension, USP vials, each mL of sterile aqueous suspension contains. When necessary, pH is adjusted with sodium hydroxide or hydrochloric acid, or both.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-315-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (70700-315-25)  / 1 mL in 1 VIAL (70700-315-22) </PackageDescription>
    <NDC11Code>70700-0315-25</NDC11Code>
    <ProductNDC>70700-315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Medroxyprogesterone Acetate</ProprietaryName>
    <NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20240312</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210227</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Medroxyprogesterone acetate injectable suspension is indicated for use by females of reproductive potential to prevent pregnancy. Limitations of Use:. The use of medroxyprogesterone acetate injectable suspension is not recommended as a long-term (i.e., longer than 2 years) birth control method unless other options are considered inadequate [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].</IndicationAndUsage>
    <Description>Medroxyprogesterone acetate injectable suspension, USP contains medroxyprogesterone acetate, USP a derivative of progesterone, as its active ingredient. Medroxyprogesterone acetate, USP is active by the parenteral and oral routes of administration. It is a white to off-white; odorless crystalline powder that is stable in air and that melts between 205°C and 209°C. It is freely soluble in chloroform, soluble in acetone and dioxane, sparingly soluble in alcohol and methanol, slightly soluble in ether, and insoluble in water. The chemical name for medroxyprogesterone acetate, USP is Pregn-4-ene-3,20-dione,17-(acetyloxy)-6-methyl-, (6α)-17- Hydroxy-6α-methylpregn-4-ene-3,20-dione acetate. The structural formula is as follows. Medroxyprogesterone acetate injectable suspension, USP for IM injection is available in vials containing 1 mL of medroxyprogesterone acetate, USP sterile aqueous suspension 150 mg/mL. For medroxyprogesterone acetate injectable suspension, USP vials, each mL of sterile aqueous suspension contains:. When necessary, pH is adjusted with sodium hydroxide or hydrochloric acid, or both.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-315-27</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70700-315-27)  / 1 mL in 1 VIAL (70700-315-22) </PackageDescription>
    <NDC11Code>70700-0315-27</NDC11Code>
    <ProductNDC>70700-315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Medroxyprogesterone Acetate</ProprietaryName>
    <NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20240312</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210227</ApplicationNumber>
    <LabelerName>Xiromed LLC</LabelerName>
    <SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240312</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Medroxyprogesterone acetate injectable suspension is indicated for use by females of reproductive potential to prevent pregnancy. Limitations of Use:. The use of medroxyprogesterone acetate injectable suspension is not recommended as a long-term (i.e., longer than 2 years) birth control method unless other options are considered inadequate [see Dosage and Administration (2.1) and Warnings and Precautions (5.1)].</IndicationAndUsage>
    <Description>Medroxyprogesterone acetate injectable suspension, USP contains medroxyprogesterone acetate, USP a derivative of progesterone, as its active ingredient. Medroxyprogesterone acetate, USP is active by the parenteral and oral routes of administration. It is a white to off-white; odorless crystalline powder that is stable in air and that melts between 205°C and 209°C. It is freely soluble in chloroform, soluble in acetone and dioxane, sparingly soluble in alcohol and methanol, slightly soluble in ether, and insoluble in water. The chemical name for medroxyprogesterone acetate, USP is Pregn-4-ene-3,20-dione,17-(acetyloxy)-6-methyl-, (6α)-17- Hydroxy-6α-methylpregn-4-ene-3,20-dione acetate. The structural formula is as follows. Medroxyprogesterone acetate injectable suspension, USP for IM injection is available in vials containing 1 mL of medroxyprogesterone acetate, USP sterile aqueous suspension 150 mg/mL. For medroxyprogesterone acetate injectable suspension, USP vials, each mL of sterile aqueous suspension contains:. When necessary, pH is adjusted with sodium hydroxide or hydrochloric acid, or both.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-328-24</NDCCode>
    <PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (70700-328-24)  / 10 mL in 1 VIAL, SINGLE-DOSE (70700-328-22) </PackageDescription>
    <NDC11Code>70700-0328-24</NDC11Code>
    <ProductNDC>70700-328</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylene Blue</ProprietaryName>
    <NonProprietaryName>Methylene Blue</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250928</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219363</ApplicationNumber>
    <LabelerName>XIROMED, LLC</LabelerName>
    <SubstanceName>METHYLENE BLUE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Oxidation-Reduction Activity [MoA], Oxidation-Reduction Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250928</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Methylene blue injection is indicated for the treatment of pediatric and adult patients with acquired methemoglobinemia.</IndicationAndUsage>
    <Description>Methylene blue is an oxidation-reduction agent. Its chemical name is 3,7-bis(dimethylamino)phenothiazin-5-ium, chloride hydrate. The molecular formula of methylene blue is C16H18ClN3S.xH2O and its molecular weight of 319.86 g/mol for the anhydrous form. The structural formula of methylene blue is. Methylene blue injection, USP is a sterile solution intended for intravenous administration. Each mL of solution contains 5 mg methylene blue and water for injection. Methylene blue injection, USP is a clear dark blue solution with a pH value between 3.0 and 4.5. The osmolality is between 10 and 15 mOsm/kg. Methylene blue injection, USP strength is expressed in terms of trihydrate.</Description>
  </NDC>
  <NDC>
    <NDCCode>70700-902-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (70700-902-25)  / 5 mL in 1 VIAL (70700-902-22) </PackageDescription>
    <NDC11Code>70700-0902-25</NDC11Code>
    <ProductNDC>70700-902</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20211109</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212612</ApplicationNumber>
    <LabelerName>Xiromed, LLC</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211109</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In AnesthesiaGlycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.In Peptic UlcerFor use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains:Glycopyrrolate, USP................0.2 mgWater for Injection, USP..........q.s.Benzyl Alcohol, NF...................0.9% (preservative)pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.For Intramuscular (IM) or Intravenous (IV) administration.Glycopyrrolate is a quaternary ammonium salt with the following chemical name:3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33.Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether.Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
</NDCList>