RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70707-155-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (70707-155-15)  / 44 mL in 1 TUBE</PackageDescription>
    <NDC11Code>70707-0155-15</NDC11Code>
    <ProductNDC>70707-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>5 Acne Med</ProprietaryName>
    <NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20111015</StartMarketingDate>
    <EndMarketingDate>20260801</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Face Reality, Inc.</LabelerName>
    <SubstanceName>BENZOYL PEROXIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20111015</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260801</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70707-151-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (70707-151-15)  / 44 mL in 1 TUBE</PackageDescription>
    <NDC11Code>70707-0151-15</NDC11Code>
    <ProductNDC>70707-151</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>10 Acne Med</ProprietaryName>
    <NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20111015</StartMarketingDate>
    <EndMarketingDate>20270701</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Face Reality, Inc.</LabelerName>
    <SubstanceName>BENZOYL PEROXIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20111015</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270701</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70707-152-15</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (70707-152-15)  / 44 mL in 1 TUBE</PackageDescription>
    <NDC11Code>70707-0152-15</NDC11Code>
    <ProductNDC>70707-152</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>2.5 Acne Med</ProprietaryName>
    <NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20111123</StartMarketingDate>
    <EndMarketingDate>20270701</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Face Reality, Inc.</LabelerName>
    <SubstanceName>BENZOYL PEROXIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20111123</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270701</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70707-200-15</NDCCode>
    <PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (70707-200-15)  / 44 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
    <NDC11Code>70707-0200-15</NDC11Code>
    <ProductNDC>70707-200</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Acne Med 2.5%</ProprietaryName>
    <NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Face Reality, LLC</LabelerName>
    <SubstanceName>BENZOYL PEROXIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70707-211-15</NDCCode>
    <PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (70707-211-15)  / 44 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
    <NDC11Code>70707-0211-15</NDC11Code>
    <ProductNDC>70707-211</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Acne Med 5%</ProprietaryName>
    <NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Face Reality, LLC</LabelerName>
    <SubstanceName>BENZOYL PEROXIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70707-212-15</NDCCode>
    <PackageDescription>1 BOTTLE, WITH APPLICATOR in 1 CARTON (70707-212-15)  / 44 mL in 1 BOTTLE, WITH APPLICATOR</PackageDescription>
    <NDC11Code>70707-0212-15</NDC11Code>
    <ProductNDC>70707-212</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Acne Med 10%</ProprietaryName>
    <NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20230101</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Face Reality, LLC</LabelerName>
    <SubstanceName>BENZOYL PEROXIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>70707-440-15</NDCCode>
    <PackageDescription>1 TUBE in 1 BOX (70707-440-15)  / 44 mL in 1 TUBE</PackageDescription>
    <NDC11Code>70707-0440-15</NDC11Code>
    <ProductNDC>70707-440</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Sulfur Spot Treatment</ProprietaryName>
    <NonProprietaryName>Sulfur</NonProprietaryName>
    <DosageFormName>GEL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200108</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M006</ApplicationNumber>
    <LabelerName>Face Reality, Inc</LabelerName>
    <SubstanceName>SULFUR</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-12-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200108</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>for the treatment of acne.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>11673-155-01</NDCCode>
    <PackageDescription>1 BOTTLE, DROPPER in 1 BOX (11673-155-01)  / 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>11673-0155-01</NDC11Code>
    <ProductNDC>11673-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Target Lubricant Eye Drops Restorative Performance</ProprietaryName>
    <NonProprietaryName>Propylene Glycol</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20190212</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M018</ApplicationNumber>
    <LabelerName>Target Corporation</LabelerName>
    <SubstanceName>PROPYLENE GLYCOL</SubstanceName>
    <StrengthNumber>.6</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2026-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190212</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Uses for the temporary relief of burning and irritation due to dryness of the eye.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>25021-155-15</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-155-15)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0155-15</NDC11Code>
    <ProductNDC>25021-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meropenem</ProprietaryName>
    <NonProprietaryName>Meropenem</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170115</StartMarketingDate>
    <EndMarketingDate>20200630</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204854</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>MEROPENEM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Carbapenems [CS],Penem Antibacterial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20170115</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200630</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>43353-155-15</NDCCode>
    <PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (43353-155-15)</PackageDescription>
    <NDC11Code>43353-0155-15</NDC11Code>
    <ProductNDC>43353-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine Fumarate</ProprietaryName>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150721</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090960</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Quetiapine tablets, USP are an atypical antipsychotic indicated for the treatment of: : 1 1.Schizophrenia (1.1), 2 2.Bipolar I disorder manic episodes (1.2), 3 3.Bipolar disorder, depressive episodes (1.2).</IndicationAndUsage>
    <Description>Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives.  The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt).  It is present in tablets as the fumarate salt.  All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt.  Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine fumarate tablets are supplied for oral administration as 25 mg (round, peach), 50 mg (round, white), 100 mg (round, yellow), 200 mg (round, white), 300 mg (capsule-shaped, white), and 400 mg (capsule-shaped, yellow) tablets. Inactive ingredients are croscarmellose sodium, colloidal silicon dioxide, fumaric acid, ethylcellulose, magnesium stearate, hypromellose, hydroxylpropyl cellulose, polyethylene glycol, and titanium dioxide. The 25 mg tablets also contain ferric oxide red and ferric oxide yellow and the 100 mg and 400 mg tablets contain only ferric oxide yellow. Meets USP Dissolution Test #2.</Description>
  </NDC>
  <NDC>
    <NDCCode>43744-155-15</NDCCode>
    <PackageDescription>10 g in 1 DRUM (43744-155-15)</PackageDescription>
    <NDC11Code>43744-0155-15</NDC11Code>
    <ProductNDC>43744-155</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Celecoxib</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20120901</StartMarketingDate>
    <EndMarketingDate>20130624</EndMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>CBSCHEM LIMITED</LabelerName>
    <SubstanceName>CELECOXIB</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>43744-155-20</NDCCode>
    <PackageDescription>15 g in 1 DRUM (43744-155-20)</PackageDescription>
    <NDC11Code>43744-0155-20</NDC11Code>
    <ProductNDC>43744-155</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Celecoxib</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20120901</StartMarketingDate>
    <EndMarketingDate>20130624</EndMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>CBSCHEM LIMITED</LabelerName>
    <SubstanceName>CELECOXIB</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>49348-155-29</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (49348-155-29)  / 15 g in 1 TUBE</PackageDescription>
    <NDC11Code>49348-0155-29</NDC11Code>
    <ProductNDC>49348-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Sunmark</ProprietaryName>
    <ProprietaryNameSuffix>Antifungal</ProprietaryNameSuffix>
    <NonProprietaryName>Tolnaftate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20060217</StartMarketingDate>
    <EndMarketingDate>20270331</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M005</ApplicationNumber>
    <LabelerName>Strategic Sourcing Services LLC</LabelerName>
    <SubstanceName>TOLNAFTATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20130213</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270331</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>clinically proven to cure most athlete's foot (tinea pedis), jock itch (tinea cruris) and ringworm (tinea corporis). helps prevent most athlete's foot from recurring when used daily. effectively soothes and relieves symptoms of athlete's foot, including itching, burning and cracking.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>71919-155-07</NDCCode>
    <PackageDescription>15 mL in 1 VIAL, GLASS (71919-155-07) </PackageDescription>
    <NDC11Code>71919-0155-07</NDC11Code>
    <ProductNDC>71919-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Camphora</ProprietaryName>
    <NonProprietaryName>Camphor (natural)</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100203</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>CAMPHOR (NATURAL)</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-03-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>84010-155-03</NDCCode>
    <PackageDescription>15 mL in 1 BOTTLE (84010-155-03) </PackageDescription>
    <NDC11Code>84010-0155-03</NDC11Code>
    <ProductNDC>84010-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Johohula Common And Plantar Wart Remover</ProprietaryName>
    <NonProprietaryName>Salicylic Acid 17% Common And Plantar Wart Remover</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20250717</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M028</ApplicationNumber>
    <LabelerName>Jiangxi Hemei Pharmaceutical Co., Ltd</LabelerName>
    <SubstanceName>SALICYLIC ACID</SubstanceName>
    <StrengthNumber>17</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-08-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250717</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>■For the removal of common andplantar warts.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>84864-155-02</NDCCode>
    <PackageDescription>15 g in 1 BOX (84864-155-02) </PackageDescription>
    <NDC11Code>84864-0155-02</NDC11Code>
    <ProductNDC>84864-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Yrfkt</ProprietaryName>
    <NonProprietaryName>Yrfkt</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>CUTANEOUS</RouteName>
    <StartMarketingDate>20241118</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M016</ApplicationNumber>
    <LabelerName>Yiwu Jingmo trade Co., LTD</LabelerName>
    <SubstanceName>COPPER TRIPEPTIDE-1</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Apply to skin until absorbed.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0093-2401-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0093-2401-01) </PackageDescription>
    <NDC11Code>00093-2401-01</NDC11Code>
    <ProductNDC>0093-2401</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
    <NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201008</StartMarketingDate>
    <EndMarketingDate>20261130</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040081</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20201008</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261130</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydroxychloroquine sulfate tablets are an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum, Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).</IndicationAndUsage>
    <Description>Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as (±)-2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) (salt). Its structural formula is. C18H26ClN3OH2SO4  Molecular Weight: 433.95. Hydroxychloroquine sulfate, USP is a white to almost white, crystalline powder, freely soluble in water; practically insoluble in alcohol, chloroform, and ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: dibasic calcium phosphate dihydrate, hypromellose, magnesium stearate, polydextrose, polyethylene glycol, starch 1500 partially pregelatinized maize starch, titanium dioxide, and triacetin.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-9644-12</NDCCode>
    <PackageDescription>12 BAG in 1 CARTON (0338-9644-12)  / 100 mL in 1 BAG (0338-9644-01) </PackageDescription>
    <NDC11Code>00338-9644-12</NDC11Code>
    <ProductNDC>0338-9644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240214</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217512</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1) , 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium in 0.9% sodium chloride injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The thawed solution of pantoprazole sodium in 0.9% sodium chloride injection is in the pH range 9.0 to 10.5. Pantoprazole sodium in 0.9% sodium chloride injection is supplied for intravenous administration as a frozen, premixed, iso-osmotic, sterile, nonpyrogenic 50 mL or 100 mL single-dose GALAXY container in following presentations:. 40 mg/100 mL (0.4 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. 40 mg/50 mL (0.8 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 77.5 mg histidine, USP; 450 mg sodium chloride, USP;. 80 mg/100 mL (0.8 mg/mL): containing 80 mg of pantoprazole (equivalent to 90.2 mg of pantoprazole sodium USP); 2 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH. The solution is intended for intravenous use after thawing to room temperature. Thawed solution is expected to range from colorless to yellow over time.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-9646-24</NDCCode>
    <PackageDescription>24 BAG in 1 CARTON (0338-9646-24)  / 50 mL in 1 BAG (0338-9646-01) </PackageDescription>
    <NDC11Code>00338-9646-24</NDC11Code>
    <ProductNDC>0338-9646</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240214</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217512</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/50mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1) , 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium in 0.9% sodium chloride injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The thawed solution of pantoprazole sodium in 0.9% sodium chloride injection is in the pH range 9.0 to 10.5. Pantoprazole sodium in 0.9% sodium chloride injection is supplied for intravenous administration as a frozen, premixed, iso-osmotic, sterile, nonpyrogenic 50 mL or 100 mL single-dose GALAXY container in following presentations:. 40 mg/100 mL (0.4 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. 40 mg/50 mL (0.8 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 77.5 mg histidine, USP; 450 mg sodium chloride, USP;. 80 mg/100 mL (0.8 mg/mL): containing 80 mg of pantoprazole (equivalent to 90.2 mg of pantoprazole sodium USP); 2 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH. The solution is intended for intravenous use after thawing to room temperature. Thawed solution is expected to range from colorless to yellow over time.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-9648-12</NDCCode>
    <PackageDescription>12 BAG in 1 CARTON (0338-9648-12)  / 100 mL in 1 BAG (0338-9648-01) </PackageDescription>
    <NDC11Code>00338-9648-12</NDC11Code>
    <ProductNDC>0338-9648</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240214</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217512</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1) , 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium in 0.9% sodium chloride injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The thawed solution of pantoprazole sodium in 0.9% sodium chloride injection is in the pH range 9.0 to 10.5. Pantoprazole sodium in 0.9% sodium chloride injection is supplied for intravenous administration as a frozen, premixed, iso-osmotic, sterile, nonpyrogenic 50 mL or 100 mL single-dose GALAXY container in following presentations:. 40 mg/100 mL (0.4 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. 40 mg/50 mL (0.8 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 77.5 mg histidine, USP; 450 mg sodium chloride, USP;. 80 mg/100 mL (0.8 mg/mL): containing 80 mg of pantoprazole (equivalent to 90.2 mg of pantoprazole sodium USP); 2 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH. The solution is intended for intravenous use after thawing to room temperature. Thawed solution is expected to range from colorless to yellow over time.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7805-01</NDCCode>
    <PackageDescription>1 POUCH in 1 CARTON (0562-7805-01)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7805-00) </PackageDescription>
    <NDC11Code>00562-7805-01</NDC11Code>
    <ProductNDC>0562-7805</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Rhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM is an immune globulin indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM is intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM Rho(D) Immune Globulin (Human) is a sterile solution containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. It is manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes both enveloped and non‐enveloped viruses as small as approximately 20 nm via a size-exclusion mechanism. Following viral filtration, quality control tests are performed on the 20 nm filtration membrane to ensure filter integrity. The viral inactivation step (Solvent/Detergent treatment) utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV, HBV and West Nile Virus (WNV).3,9, 10, 11. The donor selection process, the fractionation process, the viral filtration step, the viral inactivation process and other manufacturing process steps increase product safety by reducing the virus load potentially present in the starting material and thus reducing the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.12 There have been no documented cases of infectious disease transmission by RhoGAM. Laboratory spiking studies, performed in accordance with good laboratory practices 3 have shown that the cumulative viral removal and inactivation capability of the RhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS is manufactured by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7805-05</NDCCode>
    <PackageDescription>5 POUCH in 1 CARTON (0562-7805-05)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7805-00) </PackageDescription>
    <NDC11Code>00562-7805-05</NDC11Code>
    <ProductNDC>0562-7805</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Rhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM is an immune globulin indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM is intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM Rho(D) Immune Globulin (Human) is a sterile solution containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. It is manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes both enveloped and non‐enveloped viruses as small as approximately 20 nm via a size-exclusion mechanism. Following viral filtration, quality control tests are performed on the 20 nm filtration membrane to ensure filter integrity. The viral inactivation step (Solvent/Detergent treatment) utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV, HBV and West Nile Virus (WNV).3,9, 10, 11. The donor selection process, the fractionation process, the viral filtration step, the viral inactivation process and other manufacturing process steps increase product safety by reducing the virus load potentially present in the starting material and thus reducing the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.12 There have been no documented cases of infectious disease transmission by RhoGAM. Laboratory spiking studies, performed in accordance with good laboratory practices 3 have shown that the cumulative viral removal and inactivation capability of the RhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS is manufactured by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7805-25</NDCCode>
    <PackageDescription>25 POUCH in 1 CARTON (0562-7805-25)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7805-00) </PackageDescription>
    <NDC11Code>00562-7805-25</NDC11Code>
    <ProductNDC>0562-7805</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Rhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM is an immune globulin indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM is intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM Rho(D) Immune Globulin (Human) is a sterile solution containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. It is manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes both enveloped and non‐enveloped viruses as small as approximately 20 nm via a size-exclusion mechanism. Following viral filtration, quality control tests are performed on the 20 nm filtration membrane to ensure filter integrity. The viral inactivation step (Solvent/Detergent treatment) utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV, HBV and West Nile Virus (WNV).3,9, 10, 11. The donor selection process, the fractionation process, the viral filtration step, the viral inactivation process and other manufacturing process steps increase product safety by reducing the virus load potentially present in the starting material and thus reducing the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.12 There have been no documented cases of infectious disease transmission by RhoGAM. Laboratory spiking studies, performed in accordance with good laboratory practices 3 have shown that the cumulative viral removal and inactivation capability of the RhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS is manufactured by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7806-01</NDCCode>
    <PackageDescription>1 POUCH in 1 CARTON (0562-7806-01)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7806-00) </PackageDescription>
    <NDC11Code>00562-7806-01</NDC11Code>
    <ProductNDC>0562-7806</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Micrhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM and MICRhoGAM are immune globulins indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM and MICRhoGAM are intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM and MICRhoGAM Rho(D) Immune Globulin (Human) are sterile solutions containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. They are manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 A single dose of MICRhoGAM contains sufficient anti-D (50 μg or 250 IU) to suppress the immune response to up to 2.5 mL of Rh-positive red blood cells. The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes viruses via a size-exclusion mechanism utilizing a Viresolve 180 nanofiltration membrane (ultrafiltration mode) to remove enveloped and non-enveloped viruses. Following viral filtration, quality control tests (CorrTest and diffusion test) are performed on the Viresolve 180 nanofiltration membrane to ensure filter integrity.9 The viral inactivation step utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV and West Nile Virus (WNV).3,10. The donor selection process, the fractionation process, the viral filtration step and the viral inactivation process increase product safety by reducing the virus load and thus the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.11 There have been no documented cases of infectious disease transmission by RhoGAM or MICRhoGAM. Laboratory spiking studies3,12 have shown that the cumulative viral removal and inactivation capability of the RhoGAM / MICRhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS and MICRhoGAM Ultra-Filtered PLUS are manufactured for Kedrion Biopharma Inc. either by Ortho-Clinical Diagnostics, Inc. or by Kedrion Biopharma Inc. up to the bulk products, and all are filled and packaged by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7806-05</NDCCode>
    <PackageDescription>5 POUCH in 1 CARTON (0562-7806-05)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7806-00) </PackageDescription>
    <NDC11Code>00562-7806-05</NDC11Code>
    <ProductNDC>0562-7806</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Micrhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM and MICRhoGAM are immune globulins indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM and MICRhoGAM are intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM and MICRhoGAM Rho(D) Immune Globulin (Human) are sterile solutions containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. They are manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 A single dose of MICRhoGAM contains sufficient anti-D (50 μg or 250 IU) to suppress the immune response to up to 2.5 mL of Rh-positive red blood cells. The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes viruses via a size-exclusion mechanism utilizing a Viresolve 180 nanofiltration membrane (ultrafiltration mode) to remove enveloped and non-enveloped viruses. Following viral filtration, quality control tests (CorrTest and diffusion test) are performed on the Viresolve 180 nanofiltration membrane to ensure filter integrity.9 The viral inactivation step utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV and West Nile Virus (WNV).3,10. The donor selection process, the fractionation process, the viral filtration step and the viral inactivation process increase product safety by reducing the virus load and thus the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.11 There have been no documented cases of infectious disease transmission by RhoGAM or MICRhoGAM. Laboratory spiking studies3,12 have shown that the cumulative viral removal and inactivation capability of the RhoGAM / MICRhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS and MICRhoGAM Ultra-Filtered PLUS are manufactured for Kedrion Biopharma Inc. either by Ortho-Clinical Diagnostics, Inc. or by Kedrion Biopharma Inc. up to the bulk products, and all are filled and packaged by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7806-25</NDCCode>
    <PackageDescription>25 POUCH in 1 CARTON (0562-7806-25)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7806-00) </PackageDescription>
    <NDC11Code>00562-7806-25</NDC11Code>
    <ProductNDC>0562-7806</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Micrhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM and MICRhoGAM are immune globulins indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM and MICRhoGAM are intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM and MICRhoGAM Rho(D) Immune Globulin (Human) are sterile solutions containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. They are manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 A single dose of MICRhoGAM contains sufficient anti-D (50 μg or 250 IU) to suppress the immune response to up to 2.5 mL of Rh-positive red blood cells. The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes viruses via a size-exclusion mechanism utilizing a Viresolve 180 nanofiltration membrane (ultrafiltration mode) to remove enveloped and non-enveloped viruses. Following viral filtration, quality control tests (CorrTest and diffusion test) are performed on the Viresolve 180 nanofiltration membrane to ensure filter integrity.9 The viral inactivation step utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV and West Nile Virus (WNV).3,10. The donor selection process, the fractionation process, the viral filtration step and the viral inactivation process increase product safety by reducing the virus load and thus the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.11 There have been no documented cases of infectious disease transmission by RhoGAM or MICRhoGAM. Laboratory spiking studies3,12 have shown that the cumulative viral removal and inactivation capability of the RhoGAM / MICRhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS and MICRhoGAM Ultra-Filtered PLUS are manufactured for Kedrion Biopharma Inc. either by Ortho-Clinical Diagnostics, Inc. or by Kedrion Biopharma Inc. up to the bulk products, and all are filled and packaged by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>11489-155-01</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (11489-155-01)  &gt; 25 g in 1 TUBE</PackageDescription>
    <NDC11Code>11489-0155-01</NDC11Code>
    <ProductNDC>11489-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>No7 Protect And Perfect Intense Advanced Day Cream Spf 30</ProprietaryName>
    <NonProprietaryName>Avobenzone, Octisalate, Octocrylene</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200203</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>BCM Ltd</LabelerName>
    <SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
    <StrengthNumber>.75; 1.25; 1.875</StrengthNumber>
    <StrengthUnit>g/25g; g/25g; g/25g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Directions. Apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 months of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. Limit time in the sun, especially from 10 a.m - 2 p.m. wear long-sleeved shirts,pants,hats and sunglasses.</IndicationAndUsage>
    <Description>No7 PROTECT &amp; PERFECT TRIO. 1 x 25ml e 1 x 0.84 US Fl. Oz. THIS AGE-DEFYING TRIO CONTAINS YOUR FAVORITE DAY CREAM, SERUM &amp; NO7 LINE CORRECTING BOOSTER SERUM.</Description>
  </NDC>
  <NDC>
    <NDCCode>16590-155-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16590-155-30)</PackageDescription>
    <NDC11Code>16590-0155-30</NDC11Code>
    <ProductNDC>16590-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mirtazapine</ProprietaryName>
    <NonProprietaryName>Mirtazapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076312</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>MIRTAZAPINE</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Mirtazapine Tablets USP are indicated for the treatment of major depressive disorder. The efficacy of mirtazapine in the treatment of major depressive disorder was established in six week controlled trials of outpatients whose diagnoses corresponded most closely to the Diagnostic and Statistical Manual of Mental Disorders-3rd edition (DSM-lll) category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-lV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The effectiveness of mirtazapine in hospitalized depressed patients has not been adequately studied. The efficacy of mirtazapine in maintaining a response in patients with major depressive disorder for up to 40 weeks following 8-12 weeks of initial open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use mirtazapine for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (See CLINICAL PHARMACOLOGY).</IndicationAndUsage>
    <Description>Mirtazapine Tablets USP are an orally administered drug. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-Hexahydro-2-methylpyrazino[2,1-a]pyrido[2,3-c]benzazepine and has the molecular formula of C17H19N3. Its molecular weight is 265.35.  The structural formula is the following and it is the racemic mixture. Mirtazapine is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine is supplied for oral administration as scored, film-coated tablets containing 15 mg, 30 mg or 45 mg mirtazapine. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, opadry white (for 15 mg and 45 mg tablets only, hypromellose, polyethylene glycol, polysorbate 80, and titanium dioxide) and opadry yellow (for 30 mg only, hypromellose, iron oxide yellow, polyethylene glycol, polysorbate 80, and titanium dioxide).</Description>
  </NDC>
  <NDC>
    <NDCCode>27241-155-04</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (27241-155-04) </PackageDescription>
    <NDC11Code>27241-0155-04</NDC11Code>
    <ProductNDC>27241-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211655</ApplicationNumber>
    <LabelerName>Ajanta Pharma USA Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride is a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets is also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride, USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride, USP is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride, USP is 4(diethylamino-but-2-ynyl (RS) 2-cyclohexyl-2-hydroxy 2 phenyl acetate hydrochloride. The molecular formula of oxybutynin chloride, USP is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride, USP is a white crystalline powder with a molecular weight of 393.95. It is freely soluble in water and in alcohol, very soluble in methanol and in chloroform, soluble in acetone, slightly soluble in ether, very slightly soluble in hexane. Oxybutynin chloride extended-release tablets, USP also contains the following inert ingredients: anhydrous dibasic calcium phosphate, povidone, hypromellose, colloidal silicon dioxide, magnesium stearate, polyethylene glycol, methacrylic acid copolymer type c, talc, titanium dioxide, triethyl citrate, sodium bicarbonate, sodium lauryl sulfate, ferrosoferric oxide, ferric oxide red (in 10 mg only) and iron oxide yellow (in 5 mg and 15 mg only). The imprinting material contains: shellac glaze, black iron oxide, propylene glycol and ammonium hydroxide.Meets USP Dissolution Test 9.System Components and Performance. Oxybutynin chloride extended-release tablets, USP are formulated to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet surrounded by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
  <NDC>
    <NDCCode>27241-155-08</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (27241-155-08) </PackageDescription>
    <NDC11Code>27241-0155-08</NDC11Code>
    <ProductNDC>27241-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211655</ApplicationNumber>
    <LabelerName>Ajanta Pharma USA Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxybutynin chloride is a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets is also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
    <Description>Oxybutynin chloride, USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride, USP is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride, USP is 4(diethylamino-but-2-ynyl (RS) 2-cyclohexyl-2-hydroxy 2 phenyl acetate hydrochloride. The molecular formula of oxybutynin chloride, USP is C22H31NO3HCl. Its structural formula is. Oxybutynin chloride, USP is a white crystalline powder with a molecular weight of 393.95. It is freely soluble in water and in alcohol, very soluble in methanol and in chloroform, soluble in acetone, slightly soluble in ether, very slightly soluble in hexane. Oxybutynin chloride extended-release tablets, USP also contains the following inert ingredients: anhydrous dibasic calcium phosphate, povidone, hypromellose, colloidal silicon dioxide, magnesium stearate, polyethylene glycol, methacrylic acid copolymer type c, talc, titanium dioxide, triethyl citrate, sodium bicarbonate, sodium lauryl sulfate, ferrosoferric oxide, ferric oxide red (in 10 mg only) and iron oxide yellow (in 5 mg and 15 mg only). The imprinting material contains: shellac glaze, black iron oxide, propylene glycol and ammonium hydroxide.Meets USP Dissolution Test 9.System Components and Performance. Oxybutynin chloride extended-release tablets, USP are formulated to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet surrounded by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases drug at a controlled rate via diffusion and/or erosion.</Description>
  </NDC>
</NDCList>