{
"NDC": [
{
"NDCCode": "70710-1047-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70710-1047-5) ",
"NDC11Code": "70710-1047-05",
"ProductNDC": "70710-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin",
"NonProprietaryName": "Erythromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212693",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ERYTHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.",
"Description": "Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow."
},
{
"NDCCode": "70710-1047-1",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (70710-1047-1) ",
"NDC11Code": "70710-1047-01",
"ProductNDC": "70710-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin",
"NonProprietaryName": "Erythromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212693",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ERYTHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.",
"Description": "Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow."
},
{
"NDCCode": "70710-1047-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70710-1047-3) ",
"NDC11Code": "70710-1047-03",
"ProductNDC": "70710-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin",
"NonProprietaryName": "Erythromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212693",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ERYTHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.",
"Description": "Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow."
},
{
"NDCCode": "0121-1047-00",
"PackageDescription": "10 TRAY in 1 CASE (0121-1047-00) / 10 CUP, UNIT-DOSE in 1 TRAY / 5 mL in 1 CUP, UNIT-DOSE (0121-1047-05) ",
"NDC11Code": "00121-1047-00",
"ProductNDC": "0121-1047",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acetaminophen",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20251209",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "160",
"StrengthUnit": "mg/5mL",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251209",
"SamplePackage": "N",
"IndicationAndUsage": " for the temporary relief of minor aches and pains due to: 1 headache, 2 muscular aches, 3 backache, 4 sore throat, 5 flu, 6 the common cold, 7 toothache, 8 premenstrual and menstrual cramps."
},
{
"NDCCode": "36987-1047-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1047-1)",
"NDC11Code": "36987-1047-01",
"ProductNDC": "36987-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gerbil Epithelium",
"NonProprietaryName": "Gerbil Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "MERIONES UNGUICULATUS SKIN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "53603-1047-1",
"PackageDescription": "29.5 mL in 1 BOTTLE (53603-1047-1)",
"NDC11Code": "53603-1047-01",
"ProductNDC": "53603-1047",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Instant Hand Sanitizer",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "BB17, LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "62",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": "KILLS MORE THAN 99.99% OF COMMON GERMS."
},
{
"NDCCode": "62991-1047-5",
"PackageDescription": "1000 g in 1 JAR (62991-1047-5) ",
"NDC11Code": "62991-1047-05",
"ProductNDC": "62991-1047",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "POWDER",
"StartMarketingDate": "20090602",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "LETCO MEDICAL, LLC",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2021-05-15",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "02-JUN-09"
},
{
"NDCCode": "71335-1047-5",
"PackageDescription": "15 TABLET, FILM COATED in 1 BOTTLE (71335-1047-5) ",
"NDC11Code": "71335-1047-05",
"ProductNDC": "71335-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040602",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200214",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27CIN2O2·2HCl. M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include carnauba wax, colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, D&C Yellow #10 Aluminum Lake (25 mg and 50 mg), FD&C Blue #2 Aluminum Lake (25 mg), FD&C Red #40 Aluminum Lake (50 mg), FD&C Yellow #6 Aluminum Lake (10 mg and 50 mg), hypromellose, polyethylene glycol 3350, polyvinyl alcohol, talc, titanium dioxide, triacetin and yellow iron oxide (10 mg)."
},
{
"NDCCode": "0338-1047-02",
"PackageDescription": "12 BOTTLE, GLASS in 1 BOX (0338-1047-02) / 250 mL in 1 BOTTLE, GLASS",
"NDC11Code": "00338-1047-02",
"ProductNDC": "0338-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin In Dextrose",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19891229",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019970",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19891229",
"SamplePackage": "N",
"IndicationAndUsage": "Nitroglycerin in 5% Dextrose Injection is indicated for treatment of peri-operative hypertension; for control of heart failure in the setting of acute myocardial infarction; for treatment of angina pectoris in patients who have not responded to sublingual nitroglycerin and ß-blockers; and for induction of intraoperative hypotension.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. whose empiric formula is C3H5N3O9, and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. Dextrose (Dextrose Hydrous, USP) is D-glucose monohydrate, a hexose sugar whose structural formula is. whose empiric formula is C6H12O6 H2O, and whose molecular weight is 198.17. Dextrose is derived from corn. Nitroglycerin in 5% Dextrose Injection is a sterile, nonpyrogenic solution of nitroglycerin and dextrose in water for injection. The solution is clear and practically colorless. Each 100 mL contains 10 mg, 20 mg, or 40 mg nitroglycerin (added as Diluted Nitroglycerin, USP with propylene glycol); 5 g Dextrose Hydrous, USP; 0.84 mL Alcohol, USP (added as a dissolution aid); and 105 mg Citric Acid Hydrous, USP (added as a buffer). The pH of the solution is adjusted with sodium hydroxide and, if necessary, hydrochloric acid. Although dry nitroglycerin is explosive, nitroglycerin in 5% dextrose is not. Composition, osmolarity and pH are given in Table 1."
},
{
"NDCCode": "11584-1047-6",
"PackageDescription": "1 mL in 1 BOTTLE (11584-1047-6) ",
"NDC11Code": "11584-1047-06",
"ProductNDC": "11584-1047",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Despec",
"NonProprietaryName": "Dextromethorphan Hydrobromide, Guaifenesin, Phenyllephrine Hydrochloride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20160111",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "INTERNATIONAL ETHICAL LABS",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE; GUAIFENESIN",
"StrengthNumber": "10; 5; 100",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160111",
"SamplePackage": "N",
"IndicationAndUsage": "Uses. Temporarily relieves these symptoms due. to the common cold, hay fever (allergic. rhinitis) or other upper respiratory allergies. cough due to minor throat and bronchial. irritation. helps loosen phlegm (mucus) and thin. bronchial secretions to drain bronchial. tubes and make coughs more productive. nasal congestion. reduces swelling of nasal passages."
},
{
"NDCCode": "48951-1047-1",
"PackageDescription": "1350 PELLET in 1 BOTTLE, GLASS (48951-1047-1)",
"NDC11Code": "48951-1047-01",
"ProductNDC": "48951-1047",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Apis Belladonna Fever Relief",
"NonProprietaryName": "Atropa Belladonna, Apis Mellifera",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Uriel Pharmacy Inc",
"SubstanceName": "ATROPA BELLADONNA; APIS MELLIFERA",
"StrengthNumber": "4; 5",
"StrengthUnit": "[hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2017-07-25"
},
{
"NDCCode": "53808-1047-1",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BLISTER PACK (53808-1047-1)",
"NDC11Code": "53808-1047-01",
"ProductNDC": "53808-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077058",
"LabelerName": "State of Florida DOH Central Pharmacy",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: mannitol, sodium carbonate anhydrous, anhydrous lactose, crospovidone, povidone, calcium stearate, hypromellose, polyethylene glycol, talc, methacrylic acid copolymer type C, triethyl citrate, titanium dioxide and ferric oxide yellow. Imprinting ink contains shellac glaze, isopropyl alcohol, N-butyl alcohol, propylene glycol, ammonium hydroxide, and iron oxide black. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) meet USP dissolution test 3."
},
{
"NDCCode": "54569-1047-0",
"PackageDescription": "118 mL in 1 BOTTLE (54569-1047-0)",
"NDC11Code": "54569-1047-00",
"ProductNDC": "54569-1047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Vc With Codeine",
"NonProprietaryName": "Codeine Phosphate, Promethazine Hydrochloride, And Phenylephrine Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20061207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040660",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "CODEINE PHOSPHATE; PROMETHAZINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10; 6.25; 5",
"StrengthUnit": "mg/5mL; mg/5mL; mg/5mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC],Phenothiazine [EPC],Phenothiazines [Chemical/Ingredient],alpha-1 Adrenergic Agonist [EPC],Adrenergic alpha1-Agonists [MoA]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55513-740-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55513-740-10) / .5 mL in 1 VIAL, SINGLE-DOSE (55513-740-01) ",
"NDC11Code": "55513-0740-10",
"ProductNDC": "55513-740",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Parsabiv",
"NonProprietaryName": "Etelcalcetide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170403",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208325",
"LabelerName": "Amgen, Inc",
"SubstanceName": "ETELCALCETIDE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170403",
"SamplePackage": "N",
"IndicationAndUsage": "PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.",
"Description": "PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "55513-740-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55513-740-20) / .5 mL in 1 VIAL, SINGLE-DOSE (55513-740-01) ",
"NDC11Code": "55513-0740-20",
"ProductNDC": "55513-740",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Parsabiv",
"NonProprietaryName": "Etelcalcetide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170403",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208325",
"LabelerName": "Amgen, Inc",
"SubstanceName": "ETELCALCETIDE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250801",
"SamplePackage": "N",
"IndicationAndUsage": "PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.",
"Description": "PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "55513-741-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55513-741-10) / 1 mL in 1 VIAL, SINGLE-DOSE (55513-741-01) ",
"NDC11Code": "55513-0741-10",
"ProductNDC": "55513-741",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Parsabiv",
"NonProprietaryName": "Etelcalcetide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170403",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208325",
"LabelerName": "Amgen, Inc",
"SubstanceName": "ETELCALCETIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170403",
"SamplePackage": "N",
"IndicationAndUsage": "PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.",
"Description": "PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "55513-741-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55513-741-20) / 1 mL in 1 VIAL, SINGLE-DOSE (55513-741-01) ",
"NDC11Code": "55513-0741-20",
"ProductNDC": "55513-741",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Parsabiv",
"NonProprietaryName": "Etelcalcetide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170403",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208325",
"LabelerName": "Amgen, Inc",
"SubstanceName": "ETELCALCETIDE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250801",
"SamplePackage": "N",
"IndicationAndUsage": "PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.",
"Description": "PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "55513-742-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55513-742-10) / 2 mL in 1 VIAL, SINGLE-DOSE (55513-742-01) ",
"NDC11Code": "55513-0742-10",
"ProductNDC": "55513-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Parsabiv",
"NonProprietaryName": "Etelcalcetide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170403",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208325",
"LabelerName": "Amgen, Inc",
"SubstanceName": "ETELCALCETIDE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170403",
"SamplePackage": "N",
"IndicationAndUsage": "PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.",
"Description": "PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "55513-742-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55513-742-20) / 2 mL in 1 VIAL, SINGLE-DOSE (55513-742-01) ",
"NDC11Code": "55513-0742-20",
"ProductNDC": "55513-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Parsabiv",
"NonProprietaryName": "Etelcalcetide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170403",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208325",
"LabelerName": "Amgen, Inc",
"SubstanceName": "ETELCALCETIDE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250801",
"SamplePackage": "N",
"IndicationAndUsage": "PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.",
"Description": "PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "70710-1021-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70710-1021-5) ",
"NDC11Code": "70710-1021-05",
"ProductNDC": "70710-1021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albendazole",
"NonProprietaryName": "Albendazole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208979",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ALBENDAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20181217",
"SamplePackage": "N",
"IndicationAndUsage": "Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).",
"Description": "Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide."
},
{
"NDCCode": "70710-1048-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70710-1048-5) ",
"NDC11Code": "70710-1048-05",
"ProductNDC": "70710-1048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin",
"NonProprietaryName": "Erythromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212693",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ERYTHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2024-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.",
"Description": "Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow."
},
{
"NDCCode": "70710-1053-5",
"PackageDescription": "500 TABLET in 1 BOTTLE (70710-1053-5) ",
"NDC11Code": "70710-1053-05",
"ProductNDC": "70710-1053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Felbamate",
"NonProprietaryName": "Felbamate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208970",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FELBAMATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170815",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1054-5",
"PackageDescription": "500 TABLET in 1 BOTTLE (70710-1054-5) ",
"NDC11Code": "70710-1054-05",
"ProductNDC": "70710-1054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Felbamate",
"NonProprietaryName": "Felbamate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208970",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FELBAMATE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170815",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1062-5",
"PackageDescription": "500 TABLET in 1 BOTTLE (70710-1062-5) ",
"NDC11Code": "70710-1062-05",
"ProductNDC": "70710-1062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albuterol",
"NonProprietaryName": "Albuterol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208884",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201023",
"SamplePackage": "N",
"IndicationAndUsage": "Albuterol tablets, USP are indicated for the relief of bronchospasm in adults and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α1-[(tert-Butylamino)methyl]- 4-hydroxy-m-xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula. The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C13H21NO3)2 H2SO4. Albuterol sulfate, USP is a white or practically white powder. It is freely soluble in water, slightly soluble in alcohol, in chloroform and in ether. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively and following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (botanical source: maize) and sodium starch glycolate. FDA approved dissolution specification differs from the USP dissolution specification."
},
{
"NDCCode": "70710-1111-5",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (70710-1111-5) ",
"NDC11Code": "70710-1111-05",
"ProductNDC": "70710-1111",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208622",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170427",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine capsules are a central alpha-2-adrenergic agonist indicated for the treatment of spasticity. (1).",
"Description": "Tizanidine capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride is soluble in water and methanol. Tizanidine capsule are for oral administration and contains 2 mg or 4 mg or 6 mg tizanidine (equivalent to 2.29 mg or 4.58 mg or 6.87 mg tizanidine hydrochloride, respectively), the inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose and stearic acid. Each capsule shell contains fd & c blue # 1, fd & c red # 3, gelatin and titanium dioxide. The 2 mg capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac; 4 mg and 6 mg capsule is printed with white pharmaceutical ink which contains potassium hydroxide, shellac and titanium dioxide."
},
{
"NDCCode": "70710-1112-5",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (70710-1112-5) ",
"NDC11Code": "70710-1112-05",
"ProductNDC": "70710-1112",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208622",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170427",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine capsules are a central alpha-2-adrenergic agonist indicated for the treatment of spasticity. (1).",
"Description": "Tizanidine capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride is soluble in water and methanol. Tizanidine capsule are for oral administration and contains 2 mg or 4 mg or 6 mg tizanidine (equivalent to 2.29 mg or 4.58 mg or 6.87 mg tizanidine hydrochloride, respectively), the inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose and stearic acid. Each capsule shell contains fd & c blue # 1, fd & c red # 3, gelatin and titanium dioxide. The 2 mg capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac; 4 mg and 6 mg capsule is printed with white pharmaceutical ink which contains potassium hydroxide, shellac and titanium dioxide."
},
{
"NDCCode": "70710-1113-5",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (70710-1113-5) ",
"NDC11Code": "70710-1113-05",
"ProductNDC": "70710-1113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208622",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170427",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine capsules are a central alpha-2-adrenergic agonist indicated for the treatment of spasticity. (1).",
"Description": "Tizanidine capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride is soluble in water and methanol. Tizanidine capsule are for oral administration and contains 2 mg or 4 mg or 6 mg tizanidine (equivalent to 2.29 mg or 4.58 mg or 6.87 mg tizanidine hydrochloride, respectively), the inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose and stearic acid. Each capsule shell contains fd & c blue # 1, fd & c red # 3, gelatin and titanium dioxide. The 2 mg capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac; 4 mg and 6 mg capsule is printed with white pharmaceutical ink which contains potassium hydroxide, shellac and titanium dioxide."
},
{
"NDCCode": "70710-1127-5",
"PackageDescription": "500 TABLET in 1 BOTTLE (70710-1127-5) ",
"NDC11Code": "70710-1127-05",
"ProductNDC": "70710-1127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ursodiol",
"NonProprietaryName": "Ursodiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211145",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "URSODIOL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bile Acid [EPC], Bile Acids and Salts [CS]",
"Status": "Active",
"LastUpdate": "2024-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181107",
"SamplePackage": "N",
"IndicationAndUsage": "Ursodiol tablets, 250 mg and 500 mg are indicated for the treatment of patients with primary biliary cholangitis (PBC).",
"Description": "Ursodiol Tablets, USP 250 mg is available as a film-coated tablet for oral administration. Ursodiol Tablets, USP 500 mg is available as a scored film-coated tablet for oral administration. Ursodiol (ursodeoxycholic acid, UDCA) is a naturally occurring bile acid found in small quantities in normal human bile and in larger quantities in the biles of certain species of bears. It is a bitter-tasting white powder consisting of crystalline particles freely soluble in ethanol and glacial acetic acid, slightly soluble in chloroform, sparingly soluble in ether, and practically insoluble in water. The chemical name of ursodiol is 3α,7ß-dihydroxy-5ß-cholan-24-oic (C24 H40 O4). Ursodiol has a molecular weight of 392.56. Its structure is shown below. Inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate. The inert ingredients in film coating material are: hypromellose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "70710-1128-5",
"PackageDescription": "500 TABLET in 1 BOTTLE (70710-1128-5) ",
"NDC11Code": "70710-1128-05",
"ProductNDC": "70710-1128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ursodiol",
"NonProprietaryName": "Ursodiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211145",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "URSODIOL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bile Acid [EPC], Bile Acids and Salts [CS]",
"Status": "Active",
"LastUpdate": "2024-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181107",
"SamplePackage": "N",
"IndicationAndUsage": "Ursodiol tablets, 250 mg and 500 mg are indicated for the treatment of patients with primary biliary cholangitis (PBC).",
"Description": "Ursodiol Tablets, USP 250 mg is available as a film-coated tablet for oral administration. Ursodiol Tablets, USP 500 mg is available as a scored film-coated tablet for oral administration. Ursodiol (ursodeoxycholic acid, UDCA) is a naturally occurring bile acid found in small quantities in normal human bile and in larger quantities in the biles of certain species of bears. It is a bitter-tasting white powder consisting of crystalline particles freely soluble in ethanol and glacial acetic acid, slightly soluble in chloroform, sparingly soluble in ether, and practically insoluble in water. The chemical name of ursodiol is 3α,7ß-dihydroxy-5ß-cholan-24-oic (C24 H40 O4). Ursodiol has a molecular weight of 392.56. Its structure is shown below. Inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate. The inert ingredients in film coating material are: hypromellose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "70710-1137-5",
"PackageDescription": "500 TABLET in 1 BOTTLE (70710-1137-5) ",
"NDC11Code": "70710-1137-05",
"ProductNDC": "70710-1137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208963",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170406",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70710-1047-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70710-1047-5) </PackageDescription>
<NDC11Code>70710-1047-05</NDC11Code>
<ProductNDC>70710-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin</ProprietaryName>
<NonProprietaryName>Erythromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212693</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.</IndicationAndUsage>
<Description>Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1047-1</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (70710-1047-1) </PackageDescription>
<NDC11Code>70710-1047-01</NDC11Code>
<ProductNDC>70710-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin</ProprietaryName>
<NonProprietaryName>Erythromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212693</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.</IndicationAndUsage>
<Description>Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1047-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70710-1047-3) </PackageDescription>
<NDC11Code>70710-1047-03</NDC11Code>
<ProductNDC>70710-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin</ProprietaryName>
<NonProprietaryName>Erythromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212693</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.</IndicationAndUsage>
<Description>Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>0121-1047-00</NDCCode>
<PackageDescription>10 TRAY in 1 CASE (0121-1047-00) / 10 CUP, UNIT-DOSE in 1 TRAY / 5 mL in 1 CUP, UNIT-DOSE (0121-1047-05) </PackageDescription>
<NDC11Code>00121-1047-00</NDC11Code>
<ProductNDC>0121-1047</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251209</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> for the temporary relief of minor aches and pains due to: 1 headache, 2 muscular aches, 3 backache, 4 sore throat, 5 flu, 6 the common cold, 7 toothache, 8 premenstrual and menstrual cramps.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36987-1047-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1047-1)</PackageDescription>
<NDC11Code>36987-1047-01</NDC11Code>
<ProductNDC>36987-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gerbil Epithelium</ProprietaryName>
<NonProprietaryName>Gerbil Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>MERIONES UNGUICULATUS SKIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>53603-1047-1</NDCCode>
<PackageDescription>29.5 mL in 1 BOTTLE (53603-1047-1)</PackageDescription>
<NDC11Code>53603-1047-01</NDC11Code>
<ProductNDC>53603-1047</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Instant Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>BB17, LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>62</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage>KILLS MORE THAN 99.99% OF COMMON GERMS.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62991-1047-5</NDCCode>
<PackageDescription>1000 g in 1 JAR (62991-1047-5) </PackageDescription>
<NDC11Code>62991-1047-05</NDC11Code>
<ProductNDC>62991-1047</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20090602</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>LETCO MEDICAL, LLC</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2021-05-15</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>02-JUN-09</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-1047-5</NDCCode>
<PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (71335-1047-5) </PackageDescription>
<NDC11Code>71335-1047-05</NDC11Code>
<ProductNDC>71335-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040602</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. C21H27CIN2O2·2HCl. M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include carnauba wax, colloidal silicon dioxide, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, D&C Yellow #10 Aluminum Lake (25 mg and 50 mg), FD&C Blue #2 Aluminum Lake (25 mg), FD&C Red #40 Aluminum Lake (50 mg), FD&C Yellow #6 Aluminum Lake (10 mg and 50 mg), hypromellose, polyethylene glycol 3350, polyvinyl alcohol, talc, titanium dioxide, triacetin and yellow iron oxide (10 mg).</Description>
</NDC>
<NDC>
<NDCCode>0338-1047-02</NDCCode>
<PackageDescription>12 BOTTLE, GLASS in 1 BOX (0338-1047-02) / 250 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>00338-1047-02</NDC11Code>
<ProductNDC>0338-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin In Dextrose</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19891229</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019970</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19891229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitroglycerin in 5% Dextrose Injection is indicated for treatment of peri-operative hypertension; for control of heart failure in the setting of acute myocardial infarction; for treatment of angina pectoris in patients who have not responded to sublingual nitroglycerin and ß-blockers; and for induction of intraoperative hypotension.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. whose empiric formula is C3H5N3O9, and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. Dextrose (Dextrose Hydrous, USP) is D-glucose monohydrate, a hexose sugar whose structural formula is. whose empiric formula is C6H12O6 H2O, and whose molecular weight is 198.17. Dextrose is derived from corn. Nitroglycerin in 5% Dextrose Injection is a sterile, nonpyrogenic solution of nitroglycerin and dextrose in water for injection. The solution is clear and practically colorless. Each 100 mL contains 10 mg, 20 mg, or 40 mg nitroglycerin (added as Diluted Nitroglycerin, USP with propylene glycol); 5 g Dextrose Hydrous, USP; 0.84 mL Alcohol, USP (added as a dissolution aid); and 105 mg Citric Acid Hydrous, USP (added as a buffer). The pH of the solution is adjusted with sodium hydroxide and, if necessary, hydrochloric acid. Although dry nitroglycerin is explosive, nitroglycerin in 5% dextrose is not. Composition, osmolarity and pH are given in Table 1.</Description>
</NDC>
<NDC>
<NDCCode>11584-1047-6</NDCCode>
<PackageDescription>1 mL in 1 BOTTLE (11584-1047-6) </PackageDescription>
<NDC11Code>11584-1047-06</NDC11Code>
<ProductNDC>11584-1047</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Despec</ProprietaryName>
<NonProprietaryName>Dextromethorphan Hydrobromide, Guaifenesin, Phenyllephrine Hydrochloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160111</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>INTERNATIONAL ETHICAL LABS</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE; GUAIFENESIN</SubstanceName>
<StrengthNumber>10; 5; 100</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses. Temporarily relieves these symptoms due. to the common cold, hay fever (allergic. rhinitis) or other upper respiratory allergies. cough due to minor throat and bronchial. irritation. helps loosen phlegm (mucus) and thin. bronchial secretions to drain bronchial. tubes and make coughs more productive. nasal congestion. reduces swelling of nasal passages.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>48951-1047-1</NDCCode>
<PackageDescription>1350 PELLET in 1 BOTTLE, GLASS (48951-1047-1)</PackageDescription>
<NDC11Code>48951-1047-01</NDC11Code>
<ProductNDC>48951-1047</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Apis Belladonna Fever Relief</ProprietaryName>
<NonProprietaryName>Atropa Belladonna, Apis Mellifera</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Uriel Pharmacy Inc</LabelerName>
<SubstanceName>ATROPA BELLADONNA; APIS MELLIFERA</SubstanceName>
<StrengthNumber>4; 5</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-07-25</LastUpdate>
</NDC>
<NDC>
<NDCCode>53808-1047-1</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BLISTER PACK (53808-1047-1)</PackageDescription>
<NDC11Code>53808-1047-01</NDC11Code>
<ProductNDC>53808-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077058</ApplicationNumber>
<LabelerName>State of Florida DOH Central Pharmacy</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: mannitol, sodium carbonate anhydrous, anhydrous lactose, crospovidone, povidone, calcium stearate, hypromellose, polyethylene glycol, talc, methacrylic acid copolymer type C, triethyl citrate, titanium dioxide and ferric oxide yellow. Imprinting ink contains shellac glaze, isopropyl alcohol, N-butyl alcohol, propylene glycol, ammonium hydroxide, and iron oxide black. Pantoprazole sodium delayed-release tablets (40 mg and 20 mg) meet USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>54569-1047-0</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE (54569-1047-0)</PackageDescription>
<NDC11Code>54569-1047-00</NDC11Code>
<ProductNDC>54569-1047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Vc With Codeine</ProprietaryName>
<NonProprietaryName>Codeine Phosphate, Promethazine Hydrochloride, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20061207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040660</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>CODEINE PHOSPHATE; PROMETHAZINE HYDROCHLORIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 6.25; 5</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC],Phenothiazine [EPC],Phenothiazines [Chemical/Ingredient],alpha-1 Adrenergic Agonist [EPC],Adrenergic alpha1-Agonists [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55513-740-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55513-740-10) / .5 mL in 1 VIAL, SINGLE-DOSE (55513-740-01) </PackageDescription>
<NDC11Code>55513-0740-10</NDC11Code>
<ProductNDC>55513-740</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Parsabiv</ProprietaryName>
<NonProprietaryName>Etelcalcetide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170403</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208325</ApplicationNumber>
<LabelerName>Amgen, Inc</LabelerName>
<SubstanceName>ETELCALCETIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.</IndicationAndUsage>
<Description>PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>55513-740-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55513-740-20) / .5 mL in 1 VIAL, SINGLE-DOSE (55513-740-01) </PackageDescription>
<NDC11Code>55513-0740-20</NDC11Code>
<ProductNDC>55513-740</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Parsabiv</ProprietaryName>
<NonProprietaryName>Etelcalcetide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170403</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208325</ApplicationNumber>
<LabelerName>Amgen, Inc</LabelerName>
<SubstanceName>ETELCALCETIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.</IndicationAndUsage>
<Description>PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>55513-741-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55513-741-10) / 1 mL in 1 VIAL, SINGLE-DOSE (55513-741-01) </PackageDescription>
<NDC11Code>55513-0741-10</NDC11Code>
<ProductNDC>55513-741</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Parsabiv</ProprietaryName>
<NonProprietaryName>Etelcalcetide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170403</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208325</ApplicationNumber>
<LabelerName>Amgen, Inc</LabelerName>
<SubstanceName>ETELCALCETIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.</IndicationAndUsage>
<Description>PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>55513-741-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55513-741-20) / 1 mL in 1 VIAL, SINGLE-DOSE (55513-741-01) </PackageDescription>
<NDC11Code>55513-0741-20</NDC11Code>
<ProductNDC>55513-741</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Parsabiv</ProprietaryName>
<NonProprietaryName>Etelcalcetide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170403</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208325</ApplicationNumber>
<LabelerName>Amgen, Inc</LabelerName>
<SubstanceName>ETELCALCETIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.</IndicationAndUsage>
<Description>PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>55513-742-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55513-742-10) / 2 mL in 1 VIAL, SINGLE-DOSE (55513-742-01) </PackageDescription>
<NDC11Code>55513-0742-10</NDC11Code>
<ProductNDC>55513-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Parsabiv</ProprietaryName>
<NonProprietaryName>Etelcalcetide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170403</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208325</ApplicationNumber>
<LabelerName>Amgen, Inc</LabelerName>
<SubstanceName>ETELCALCETIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.</IndicationAndUsage>
<Description>PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>55513-742-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55513-742-20) / 2 mL in 1 VIAL, SINGLE-DOSE (55513-742-01) </PackageDescription>
<NDC11Code>55513-0742-20</NDC11Code>
<ProductNDC>55513-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Parsabiv</ProprietaryName>
<NonProprietaryName>Etelcalcetide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170403</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208325</ApplicationNumber>
<LabelerName>Amgen, Inc</LabelerName>
<SubstanceName>ETELCALCETIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PARSABIV is indicated for the treatment of secondary hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on hemodialysis.</IndicationAndUsage>
<Description>PARSABIV (etelcalcetide) is a synthetic peptide calcium-sensing receptor agonist. Etelcalcetide is a white to off-white powder with a molecular formula of C38H73N21O10S2∙xHCl (4 ≤ x ≤ 5) and a molecular weight of 1047.5 g/mol (monoisotopic; free base). It is soluble in water. The hydrochloride salt of etelcalcetide is described chemically as N-acetyl-D-cysteinyl-S-(L-cysteine disulfide)-D-alanyl-D-arginyl-D-arginyl-D-arginyl-D-alanyl-D-argininamide hydrochloride. PARSABIV (etelcalcetide) injection is supplied in a single-dose vial containing 5 mg/mL of etelcalcetide as a sterile, preservative-free, ready-to-use clear and colorless solution for intravenous injection. Each PARSABIV single-dose vial contains 2.5 mg etelcalcetide (equivalent to 2.88 mg etelcalcetide as hydrochloride salt) or 5 mg etelcalcetide (equivalent to 5.77 mg etelcalcetide as hydrochloride salt) or 10 mg etelcalcetide (equivalent to 11.54 mg etelcalcetide as hydrochloride salt). PARSABIV single-dose vial is formulated with 0.85% (w/v) sodium chloride, 10 mM succinic acid, and adjusted to pH 3.3 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>70710-1021-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70710-1021-5) </PackageDescription>
<NDC11Code>70710-1021-05</NDC11Code>
<ProductNDC>70710-1021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albendazole</ProprietaryName>
<NonProprietaryName>Albendazole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208979</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALBENDAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).</IndicationAndUsage>
<Description>Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1048-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70710-1048-5) </PackageDescription>
<NDC11Code>70710-1048-05</NDC11Code>
<ProductNDC>70710-1048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin</ProprietaryName>
<NonProprietaryName>Erythromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212693</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin tablets, USP and other antibacterial drugs, erythromycin tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin tablets, USP are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes; Streptococcus pneumoniae; Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information). Lower respiratory tract infections of mild to moderate severity caused by Streptococcus pyogenes or Streptococcus pneumoniae. Listeriosis caused by Listeria monocytogenes. Respiratory tract infections due to Mycoplasma pneumoniae. Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals, rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Diphtheria: Infections due to Corynebacterium diphtheriae, as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: Erythrocin® Lactobionate-I.V. (erythromycin lactobionate for injection, USP) followed by erythromycin base orally, as an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Erythromycins are indicated for treatment of the following infections caused by Chlamydia trachomatis: conjunctivitis of the newborn, pneumonia of infancy and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical or rectal infections in adults due to Chlamydia trachomatis.3. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum.3. Primary syphilis caused by Treponema pallidum. Erythromycin (oral forms only) is an alternative choice of treatment for primary syphilis in patients allergic to the penicillins. In treatment of primary syphilis, spinal fluid should be examined before treatment and as part of the follow-up after therapy. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease.</IndicationAndUsage>
<Description>Erythromycin tablets, USP are an antibacterial product containing erythromycin, USP, in a unique, nonenteric film coating for oral administration. Erythromycin tablets are available in two strengths containing either 250 mg or 500 mg of erythromycin base. Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. Erythromycin is a white or slightly yellow powder or colorless or slightly yellow crystals, very slightly soluble to practically insoluble in water and soluble in alcohol, in chloroform and in ether. Erythromycin is known chemically as (3R*,4S*,5S*,6R*,7R*,9R*,11R*,12R*,13S*,14R*)-4-[(2,6-Dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7,12,13-trihydroxy-3,5,7,9,11,13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2,10-dione. The molecular formula is C37H67 NO13 and the molecular weight is 733.93. The structural formula is. Inactive Ingredients. Colloidal silicon dioxide, crospovidone, croscarmellose sodium, D&C red #30 aluminium lake, hydroxypropyl cellulose, hypromellose phthalate, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone (k-30), povidone (k-90), propylene glycol, sodium citrate dihydrate, sorbic acid, sodium hydroxide, sorbitan monooleate, titanium dioxide and talc. Additionally, each 250 mg tablets contain iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1053-5</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70710-1053-5) </PackageDescription>
<NDC11Code>70710-1053-05</NDC11Code>
<ProductNDC>70710-1053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Felbamate</ProprietaryName>
<NonProprietaryName>Felbamate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208970</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FELBAMATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1054-5</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70710-1054-5) </PackageDescription>
<NDC11Code>70710-1054-05</NDC11Code>
<ProductNDC>70710-1054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Felbamate</ProprietaryName>
<NonProprietaryName>Felbamate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208970</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FELBAMATE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1062-5</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70710-1062-5) </PackageDescription>
<NDC11Code>70710-1062-05</NDC11Code>
<ProductNDC>70710-1062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albuterol</ProprietaryName>
<NonProprietaryName>Albuterol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208884</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albuterol tablets, USP are indicated for the relief of bronchospasm in adults and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Albuterol tablets, USP contain albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta2 -adrenergic bronchodilator. Albuterol sulfate has the chemical name α1-[(tert-Butylamino)methyl]- 4-hydroxy-m-xylene-α,α'-diol sulfate (2:1) (salt) and the following structural formula. The molecular weight of albuterol sulfate is 576.71, and the molecular formula is (C13H21NO3)2 H2SO4. Albuterol sulfate, USP is a white or practically white powder. It is freely soluble in water, slightly soluble in alcohol, in chloroform and in ether. The World Health Organization recommended name for albuterol base is salbutamol. Each albuterol tablet, USP for oral administration contains 2 mg or 4 mg of albuterol as 2.4 mg or 4.8 mg of albuterol sulfate, USP respectively and following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch (botanical source: maize) and sodium starch glycolate. FDA approved dissolution specification differs from the USP dissolution specification.</Description>
</NDC>
<NDC>
<NDCCode>70710-1111-5</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (70710-1111-5) </PackageDescription>
<NDC11Code>70710-1111-05</NDC11Code>
<ProductNDC>70710-1111</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208622</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine capsules are a central alpha-2-adrenergic agonist indicated for the treatment of spasticity. (1).</IndicationAndUsage>
<Description>Tizanidine capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride is soluble in water and methanol. Tizanidine capsule are for oral administration and contains 2 mg or 4 mg or 6 mg tizanidine (equivalent to 2.29 mg or 4.58 mg or 6.87 mg tizanidine hydrochloride, respectively), the inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose and stearic acid. Each capsule shell contains fd & c blue # 1, fd & c red # 3, gelatin and titanium dioxide. The 2 mg capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac; 4 mg and 6 mg capsule is printed with white pharmaceutical ink which contains potassium hydroxide, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1112-5</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (70710-1112-5) </PackageDescription>
<NDC11Code>70710-1112-05</NDC11Code>
<ProductNDC>70710-1112</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208622</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine capsules are a central alpha-2-adrenergic agonist indicated for the treatment of spasticity. (1).</IndicationAndUsage>
<Description>Tizanidine capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride is soluble in water and methanol. Tizanidine capsule are for oral administration and contains 2 mg or 4 mg or 6 mg tizanidine (equivalent to 2.29 mg or 4.58 mg or 6.87 mg tizanidine hydrochloride, respectively), the inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose and stearic acid. Each capsule shell contains fd & c blue # 1, fd & c red # 3, gelatin and titanium dioxide. The 2 mg capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac; 4 mg and 6 mg capsule is printed with white pharmaceutical ink which contains potassium hydroxide, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1113-5</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (70710-1113-5) </PackageDescription>
<NDC11Code>70710-1113-05</NDC11Code>
<ProductNDC>70710-1113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208622</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine capsules are a central alpha-2-adrenergic agonist indicated for the treatment of spasticity. (1).</IndicationAndUsage>
<Description>Tizanidine capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine Hydrochloride is a white to slightly yellow crystalline powder. Tizanidine Hydrochloride is soluble in water and methanol. Tizanidine capsule are for oral administration and contains 2 mg or 4 mg or 6 mg tizanidine (equivalent to 2.29 mg or 4.58 mg or 6.87 mg tizanidine hydrochloride, respectively), the inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose and stearic acid. Each capsule shell contains fd & c blue # 1, fd & c red # 3, gelatin and titanium dioxide. The 2 mg capsule is printed with black pharmaceutical ink which contains black iron oxide, potassium hydroxide and shellac; 4 mg and 6 mg capsule is printed with white pharmaceutical ink which contains potassium hydroxide, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1127-5</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70710-1127-5) </PackageDescription>
<NDC11Code>70710-1127-05</NDC11Code>
<ProductNDC>70710-1127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ursodiol</ProprietaryName>
<NonProprietaryName>Ursodiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211145</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>URSODIOL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bile Acid [EPC], Bile Acids and Salts [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ursodiol tablets, 250 mg and 500 mg are indicated for the treatment of patients with primary biliary cholangitis (PBC).</IndicationAndUsage>
<Description>Ursodiol Tablets, USP 250 mg is available as a film-coated tablet for oral administration. Ursodiol Tablets, USP 500 mg is available as a scored film-coated tablet for oral administration. Ursodiol (ursodeoxycholic acid, UDCA) is a naturally occurring bile acid found in small quantities in normal human bile and in larger quantities in the biles of certain species of bears. It is a bitter-tasting white powder consisting of crystalline particles freely soluble in ethanol and glacial acetic acid, slightly soluble in chloroform, sparingly soluble in ether, and practically insoluble in water. The chemical name of ursodiol is 3α,7ß-dihydroxy-5ß-cholan-24-oic (C24 H40 O4). Ursodiol has a molecular weight of 392.56. Its structure is shown below. Inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate. The inert ingredients in film coating material are: hypromellose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1128-5</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70710-1128-5) </PackageDescription>
<NDC11Code>70710-1128-05</NDC11Code>
<ProductNDC>70710-1128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ursodiol</ProprietaryName>
<NonProprietaryName>Ursodiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211145</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>URSODIOL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bile Acid [EPC], Bile Acids and Salts [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ursodiol tablets, 250 mg and 500 mg are indicated for the treatment of patients with primary biliary cholangitis (PBC).</IndicationAndUsage>
<Description>Ursodiol Tablets, USP 250 mg is available as a film-coated tablet for oral administration. Ursodiol Tablets, USP 500 mg is available as a scored film-coated tablet for oral administration. Ursodiol (ursodeoxycholic acid, UDCA) is a naturally occurring bile acid found in small quantities in normal human bile and in larger quantities in the biles of certain species of bears. It is a bitter-tasting white powder consisting of crystalline particles freely soluble in ethanol and glacial acetic acid, slightly soluble in chloroform, sparingly soluble in ether, and practically insoluble in water. The chemical name of ursodiol is 3α,7ß-dihydroxy-5ß-cholan-24-oic (C24 H40 O4). Ursodiol has a molecular weight of 392.56. Its structure is shown below. Inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate. The inert ingredients in film coating material are: hypromellose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1137-5</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70710-1137-5) </PackageDescription>
<NDC11Code>70710-1137-05</NDC11Code>
<ProductNDC>70710-1137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208963</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
</NDCList>