{
"NDC": [
{
"NDCCode": "70710-1552-6",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (70710-1552-6) ",
"NDC11Code": "70710-1552-06",
"ProductNDC": "70710-1552",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Selexipag",
"NonProprietaryName": "Selexipag",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214302",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "SELEXIPAG",
"StrengthNumber": "400",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Prostacyclin Receptor Agonist [EPC], Prostacyclin Receptor Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250214",
"SamplePackage": "Y",
"IndicationAndUsage": "Selexipag tablets are a prostacyclin receptor agonist indicated for the treatment of pulmonary arterial hypertension (PAH, WHO Group I): : 1 In adults to delay disease progression and reduce the risk of hospitalization for PAH. (1.1).",
"Description": "Selexipag tablets contains selexipag, a prostacyclin receptor agonist. The chemical name of selexipag is 2-{4-[(5,6-diphenylpyrazin-2-yl)(isopropyl)amino]butoxy}-N(methylsulfonyl) acetamide. It has a molecular formula of C26H32N4O4S and a molecular weight of 496.62. Selexipag has the following structural formula. Selexipag is an off white to pale yellow crystalline powder that is practically insoluble in water. In the solid state selexipag is very stable, is not hygroscopic, and is not light sensitive. Depending on the dose strength, each round film-coated tablet for oral administration contains 200 mcg, 400 mcg, 600 mcg, 800 mcg, 1,000 mcg, 1,200 mcg, 1,400 mcg, or 1,600 mcg of selexipag. The tablets include the following inactive ingredients: corn starch, colloidal silicon dioxide, hydroxypropyl cellulose, low substituted hydroxypropyl cellulose, microcrystalline cellulose and magnesium stearate. The tablets are film coated with a coating material containing hypromellose, propylene glycol, carnauba wax, titanium dioxide, along with mixtures of ferrosoferric oxide, iron oxide red or iron oxide yellow."
},
{
"NDCCode": "24286-1552-6",
"PackageDescription": "1 BOTTLE in 1 BOX (24286-1552-6) > 60 TABLET in 1 BOTTLE",
"NDC11Code": "24286-1552-06",
"ProductNDC": "24286-1552",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Purgasol",
"NonProprietaryName": "Sennosides Docusate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "DLC Laboratories, Inc.",
"SubstanceName": "SENNOSIDES; DOCUSATE SODIUM",
"StrengthNumber": "8.6; 50",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20091116",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1552-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1552-3) / 1 CARTON in 1 POUCH (51662-1552-2) / 1 VIAL, SINGLE-USE in 1 CARTON / 10 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "51662-1552-03",
"ProductNDC": "51662-1552",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "JELLY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086283",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210614",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Jelly USP, 2% is indicated for prevention and control of pain in procedures involving the male and female urethra for topical treatment of painful urethritis, and as an anesthetic lubricant for endotracheal intubation (oral and nasal).",
"Description": "Lidocaine Hydrochloride Jelly USP, 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Jelly USP, 2% contains lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula. Composition of Lidocaine Hydrochloride Jelly USP, 2%. Each mL contains 20 mg of lidocaine hydrochloride, and sodium carboxymethylcellulose as a viscosity-increasing agent. Sodium hydroxide may have been added to adjust pH to meet USP limits of 6 to 7. Carboxymethylcellulose sodium adjusts the resulting mixture to a suitable consistency, to enhance contact with mucosa and provide lubrication for instrumentation. This product contains no preservative and any unused portion should be discarded after initial use."
},
{
"NDCCode": "67046-1552-3",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (67046-1552-3) ",
"NDC11Code": "67046-1552-03",
"ProductNDC": "67046-1552",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine Hydrochloride",
"NonProprietaryName": "Clonidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202297",
"LabelerName": "Coupler LLC",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250409",
"SamplePackage": "N",
"IndicationAndUsage": "Clonidine hydrochloride tablets, USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets, USP may be employed alone or concomitantly with other antihypertensive agents.",
"Description": "Clonidine hydrochloride, USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The inactive ingredients are colloidal silicon dioxide, corn starch, calcium phosphate dibasic, hydroxypropyl cellulose, microcrystalline cellulose, lactose monohydrate and magnesium stearate. In addition, the 0.1 mg tablets contain FD&C Red No. 40, and the 0.2 mg and 0.3 mg tablets contain FD&C Yellow No. 6 as color additives respectively. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
},
{
"NDCCode": "70710-1006-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1006-6) ",
"NDC11Code": "70710-1006-06",
"ProductNDC": "70710-1006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Misoprostol",
"NonProprietaryName": "Misoprostol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210201",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MISOPROSTOL",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200114",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1007-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1007-6) ",
"NDC11Code": "70710-1007-06",
"ProductNDC": "70710-1007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Misoprostol",
"NonProprietaryName": "Misoprostol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210201",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MISOPROSTOL",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200114",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1021-6",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE (70710-1021-6) ",
"NDC11Code": "70710-1021-06",
"ProductNDC": "70710-1021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albendazole",
"NonProprietaryName": "Albendazole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208979",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ALBENDAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200511",
"SamplePackage": "N",
"IndicationAndUsage": "Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).",
"Description": "Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide."
},
{
"NDCCode": "70710-1050-6",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (70710-1050-6) ",
"NDC11Code": "70710-1050-06",
"ProductNDC": "70710-1050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210575",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210504",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution."
},
{
"NDCCode": "70710-1051-6",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (70710-1051-6) ",
"NDC11Code": "70710-1051-06",
"ProductNDC": "70710-1051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210575",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210504",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution."
},
{
"NDCCode": "70710-1165-6",
"PackageDescription": "1 BOTTLE in 1 CARTON (70710-1165-6) / 60 mL in 1 BOTTLE",
"NDC11Code": "70710-1165-06",
"ProductNDC": "70710-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oseltamivir Phosphate",
"NonProprietaryName": "Oseltamivir Phosphate",
"DosageFormName": "FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20170914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209113",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OSELTAMIVIR PHOSPHATE",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-03-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170914",
"SamplePackage": "N",
"IndicationAndUsage": "Oseltamivir Phosphate is an influenza neuraminidase inhibitor (NAI) indicated for: 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. (1.1), 2 Prophylaxis of influenza A and B in patients 1 year and older. (1.2).",
"Description": "Oseltamivir Phosphate for Oral Suspension, an influenza neuraminidase inhibitor (NAI), is available as a powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains sorbitol, titanium dioxide, xanthan gum, sodium benzoate, monosodium citrate, tutti-frutti flavoring, and saccharin sodium. Oseltamivir phosphate is a white crystalline solid with the chemical name (3R,4R,5S)-4-acetylamino-5- amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C16H28N2O4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows."
},
{
"NDCCode": "70710-1205-6",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1205-6) ",
"NDC11Code": "70710-1205-06",
"ProductNDC": "70710-1205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl Fumarate",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210538",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200928",
"SamplePackage": "Y",
"IndicationAndUsage": "Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "70710-1243-6",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (70710-1243-6) ",
"NDC11Code": "70710-1243-06",
"ProductNDC": "70710-1243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tofacitinib",
"NonProprietaryName": "Tofacitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209829",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TOFACITINIB CITRATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260511",
"SamplePackage": "N",
"IndicationAndUsage": "Tofacitinib tablets are Janus kinase (JAK) inhibitors. Tofacitinib tablets are indicated for the treatment of adult patients with: 1 Moderately to severely active rheumatoid arthritis (RA),who have had an inadequate response or intolerance to one or more TNF blockers., 2 Active psoriatic arthritis (PsA),who have had an inadequate response or intolerance to one or more TNF blockers., 3 Active ankylosing spondylitis (AS),who have had an inadequate response or intolerance to one or more TNF blockers., 4 Moderately to severely active ulcerative colitis (UC),who have had an inadequate response or intolerance to one or more TNF blockers.",
"Description": "Tofacitinib tablets are formulated with the citrate salt of tofacitinib, a JAK inhibitor. Tofacitinib citrate is a white to off-white powder and soluble in dimethylsulfoxide and. insoluble in water with the following chemical name: (3R,4R)-4-methyl-3-(methyl-7Hpyrrolo [2,3-d]pyrimidin-4-ylamino)-ß-oxo-1-piperidinepropanenitrile, 2-hydroxy-1,2,3- propanetricarboxylate (1:1). The solubility of tofacitinib citrate in water is 2.9 mg/mL. Tofacitinib citrate has a molecular weight of 504.5 Daltons (or 312.4 Daltons as the. tofacitinib free base) and a molecular formula of C16H20N6OC6H8O7. The chemical. structure of tofacitinib citrate is. Each 5 mg and 10 mg film-coated tablet contains tofacitinib equivalent to 8.08 mg and 16.15 mg of tofacitinib citrate respectively for oral administration and contains following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and titanium dioxide. Additionally, each 10 mg tablet contains FD&C blue #1 Aluminum Lake and iron oxide yellow."
},
{
"NDCCode": "70710-1272-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1272-6) ",
"NDC11Code": "70710-1272-06",
"ProductNDC": "70710-1272",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213719",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250708",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake."
},
{
"NDCCode": "70710-1273-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1273-6) ",
"NDC11Code": "70710-1273-06",
"ProductNDC": "70710-1273",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213719",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250708",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake."
},
{
"NDCCode": "70710-1274-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1274-6) ",
"NDC11Code": "70710-1274-06",
"ProductNDC": "70710-1274",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213719",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250708",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake."
},
{
"NDCCode": "70710-1302-7",
"PackageDescription": "5 BLISTER PACK in 1 POUCH (70710-1302-7) / 6 SUPPOSITORY in 1 BLISTER PACK (70710-1302-6) ",
"NDC11Code": "70710-1302-07",
"ProductNDC": "70710-1302",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20200214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208953",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2025-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200214",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine is an aminosalicylate indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.",
"Description": "The active ingredient in Mesalamine suppositories, USP 1000 mg is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each Mesalamine suppository, USP contains 1000 mg of mesalamine, USP (micronized) in a base of hard fat. Mesalamine, USP (micronized) are light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. It is slightly soluble in water; very slightly soluble in methanol, in dehydrated alcohol, and in acetone; practically insoluble in n-butyl alcohol, in chloroform, in ether, in ethyl acetate, in n-hexane, in methylene chloride, and in n-propyl alcohol; soluble in dilute hydrochloric acid and in dilute alkali hydroxides. The molecular formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is."
},
{
"NDCCode": "70710-1359-6",
"PackageDescription": "10 VIAL in 1 CARTON (70710-1359-6) / 20 mL in 1 VIAL (70710-1359-1) ",
"NDC11Code": "70710-1359-06",
"ProductNDC": "70710-1359",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209465",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220629",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).",
"Description": "The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "70710-1461-6",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70710-1461-6) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "70710-1461-06",
"ProductNDC": "70710-1461",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol Decanoate",
"NonProprietaryName": "Haloperidol Decanoate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20191114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211180",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "HALOPERIDOL DECANOATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191114",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol decanoate is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.",
"Description": "Haloperidol decanoate, USP is the decanoate ester of the butyrophenone, haloperidol. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]-4 piperidinyl decanoate, is. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate, USP is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of Haloperidol decanoate injection, 50 mg/mL for IM injection contains 50 mg haloperidol (present as haloperidol decanoate, USP 70.52 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative. Each mL of Haloperidol decanoate injection, 100 mg/mL for IM injection contains 100 mg haloperidol (present as haloperidol decanoate, USP 141.04 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative."
},
{
"NDCCode": "70710-1471-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1471-6) ",
"NDC11Code": "70710-1471-06",
"ProductNDC": "70710-1471",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ivabradine",
"NonProprietaryName": "Ivabradine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213442",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "IVABRADINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hyperpolarization-activated Cyclic Nucleotide-gated Channel Antagonists [MoA], Hyperpolarization-activated Cyclic Nucleotide-gated Channel Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240702",
"SamplePackage": "N",
"IndicationAndUsage": "Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker indicated: : 1 To reduce the risk of hospitalization for worsening heart failure in adult patients with stable, symptomatic chronic heart failure with reduced left ventricular ejection fraction. (1.1).",
"Description": "Ivabradine tablet contains ivabradine as the active pharmaceutical ingredient. Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker that reduces the spontaneous pacemaker activity of the cardiac sinus node by selectively inhibiting the If current, resulting in heart rate reduction with no effect on ventricular· repolarization and no effects on myocardial contractility. The chemical name for ivabradine hydrochloride is 3-(3-{[((7S)-3,4-Dimethoxybicyclo[4.2.0]octa-1,3,5-trien-7-yl)methyl] methyl amino} propyl)-1,3,4,5-tetrahydro-7,8-dimethoxy-2H-3-benzazepin-2-one, hydrochloride. The molecular formula is C27H36N2O5, HCl and the molecular weight (free base + HCl) is 505.05 (468.59 + 36.46). The chemical structure of ivabradine is shown in Figure 1. Figure 1. Chemical Structure of Ivabradine. Ivabradine tablets are supplied in 5 mg and 7.5 mg tablets for oral administration. The tablets contain 5 mg and 7.5 mg of ivabradine, as the active ingredient, equivalent to 5.39 mg and 8.085 mg of ivabradine hydrochloride, respectively. Each film-coated tablet contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, D&C yellow #10 aluminum lake, D&C red #27/phloxine aluminum lake, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "70710-1472-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1472-6) ",
"NDC11Code": "70710-1472-06",
"ProductNDC": "70710-1472",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ivabradine",
"NonProprietaryName": "Ivabradine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213442",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "IVABRADINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hyperpolarization-activated Cyclic Nucleotide-gated Channel Antagonists [MoA], Hyperpolarization-activated Cyclic Nucleotide-gated Channel Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240702",
"SamplePackage": "N",
"IndicationAndUsage": "Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker indicated: : 1 To reduce the risk of hospitalization for worsening heart failure in adult patients with stable, symptomatic chronic heart failure with reduced left ventricular ejection fraction. (1.1).",
"Description": "Ivabradine tablet contains ivabradine as the active pharmaceutical ingredient. Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker that reduces the spontaneous pacemaker activity of the cardiac sinus node by selectively inhibiting the If current, resulting in heart rate reduction with no effect on ventricular· repolarization and no effects on myocardial contractility. The chemical name for ivabradine hydrochloride is 3-(3-{[((7S)-3,4-Dimethoxybicyclo[4.2.0]octa-1,3,5-trien-7-yl)methyl] methyl amino} propyl)-1,3,4,5-tetrahydro-7,8-dimethoxy-2H-3-benzazepin-2-one, hydrochloride. The molecular formula is C27H36N2O5, HCl and the molecular weight (free base + HCl) is 505.05 (468.59 + 36.46). The chemical structure of ivabradine is shown in Figure 1. Figure 1. Chemical Structure of Ivabradine. Ivabradine tablets are supplied in 5 mg and 7.5 mg tablets for oral administration. The tablets contain 5 mg and 7.5 mg of ivabradine, as the active ingredient, equivalent to 5.39 mg and 8.085 mg of ivabradine hydrochloride, respectively. Each film-coated tablet contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, D&C yellow #10 aluminum lake, D&C red #27/phloxine aluminum lake, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "70710-1514-6",
"PackageDescription": "10 SYRINGE in 1 CARTON (70710-1514-6) / .5 mL in 1 SYRINGE (70710-1514-2) ",
"NDC11Code": "70710-1514-06",
"ProductNDC": "70710-1514",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fondaparinux Sodium",
"NonProprietaryName": "Fondaparinux Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208615",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FONDAPARINUX SODIUM",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190206",
"SamplePackage": "N",
"Description": "Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0."
},
{
"NDCCode": "70710-1515-6",
"PackageDescription": "10 SYRINGE in 1 CARTON (70710-1515-6) / .4 mL in 1 SYRINGE (70710-1515-2) ",
"NDC11Code": "70710-1515-06",
"ProductNDC": "70710-1515",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fondaparinux Sodium",
"NonProprietaryName": "Fondaparinux Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208615",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FONDAPARINUX SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/.4mL",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190206",
"SamplePackage": "N",
"Description": "Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0."
},
{
"NDCCode": "70710-1516-6",
"PackageDescription": "10 SYRINGE in 1 CARTON (70710-1516-6) / .6 mL in 1 SYRINGE (70710-1516-2) ",
"NDC11Code": "70710-1516-06",
"ProductNDC": "70710-1516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fondaparinux Sodium",
"NonProprietaryName": "Fondaparinux Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208615",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FONDAPARINUX SODIUM",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/.6mL",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190206",
"SamplePackage": "N",
"Description": "Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0."
},
{
"NDCCode": "70710-1516-9",
"PackageDescription": "2 SYRINGE in 1 CARTON (70710-1516-9) / .6 mL in 1 SYRINGE (70710-1516-2) ",
"NDC11Code": "70710-1516-09",
"ProductNDC": "70710-1516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fondaparinux Sodium",
"NonProprietaryName": "Fondaparinux Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208615",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FONDAPARINUX SODIUM",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/.6mL",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190206",
"SamplePackage": "N",
"Description": "Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0."
},
{
"NDCCode": "70710-1517-6",
"PackageDescription": "10 SYRINGE in 1 CARTON (70710-1517-6) / .8 mL in 1 SYRINGE (70710-1517-2) ",
"NDC11Code": "70710-1517-06",
"ProductNDC": "70710-1517",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fondaparinux Sodium",
"NonProprietaryName": "Fondaparinux Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208615",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FONDAPARINUX SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/.8mL",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190206",
"SamplePackage": "N",
"Description": "Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0."
},
{
"NDCCode": "70710-1532-6",
"PackageDescription": "10 VIAL in 1 CARTON (70710-1532-6) / 5 mL in 1 VIAL (70710-1532-1) ",
"NDC11Code": "70710-1532-06",
"ProductNDC": "70710-1532",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212171",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.",
"Description": "Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. The pH of cisatracurium besylate injection, USP is between 3.25 and 3.65."
},
{
"NDCCode": "70710-1533-6",
"PackageDescription": "10 VIAL in 1 CARTON (70710-1533-6) > 10 mL in 1 VIAL (70710-1533-1) ",
"NDC11Code": "70710-1533-06",
"ProductNDC": "70710-1533",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213527",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20201105",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.",
"Description": "Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium besylate injection USP is a sterile, non-pyrogenic aqueous solution provided in 10 mL vial. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. : 1 The 10 mL multiple-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate, and 0.9% benzyl alcohol as a preservative."
},
{
"NDCCode": "70710-1534-6",
"PackageDescription": "10 VIAL in 1 CARTON (70710-1534-6) / 20 mL in 1 VIAL (70710-1534-1) ",
"NDC11Code": "70710-1534-06",
"ProductNDC": "70710-1534",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cisatracurium Besylate",
"NonProprietaryName": "Cisatracurium Besylate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212171",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "CISATRACURIUM BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N",
"IndicationAndUsage": "Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.",
"Description": "Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. The pH of cisatracurium besylate injection, USP is between 3.25 and 3.65."
},
{
"NDCCode": "70710-1537-6",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1537-6) ",
"NDC11Code": "70710-1537-06",
"ProductNDC": "70710-1537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140527",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090728",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20140527",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major Depressive Disorder [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)], 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)], 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].",
"Description": "Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1- naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is soluble in methanol and chloroform and slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4 mg or 33.7 mg or 67.3 mg of duloxetine hydrochloride, USP equivalent to 20 mg or 30 mg or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. In addition, each capsule contains following inactive ingredients: gelatin, hypromellose, hypromellose phthalate, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. Sugar spheres contain corn starch and sucrose. Additionally each 20 mg capsule shell contains D&C yellow # 10, FD&C blue # 1 and FD&C yellow # 6, each 30 mg capsule shell contains D&C yellow # 10, FD&C blue # 1, FD&C red # 40 and FD&C yellow # 6 and each 60 mg capsule shell contains FD&C blue # 1, FD&C red # 40. Each capsule shell is printed with golden pharmaceutical ink which contains the following inactive ingredients: butyl alcohol, dehydrated alcohol, isopropyl alcohol, propylene glycol, shellac, strong ammonia solution and yellow iron oxide."
},
{
"NDCCode": "70710-1549-6",
"PackageDescription": "12 BLISTER PACK in 1 CARTON (70710-1549-6) / 1 SYRINGE in 1 BLISTER PACK / 1 mL in 1 SYRINGE (70710-1549-2) ",
"NDC11Code": "70710-1549-06",
"ProductNDC": "70710-1549",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glatiramer Acetate",
"NonProprietaryName": "Glatiramer Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20251110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208468",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "GLATIRAMER ACETATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251110",
"SamplePackage": "N",
"IndicationAndUsage": "Glatiramer acetate injection is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Glatiramer acetate, the active ingredient of glatiramer acetate injection, consists of the acetate salts of synthetic polypeptides, containing four naturally occurring amino acids: L-glutamic acid, L-alanine, L-tyrosine, and L-lysine with an average molar fraction of 0.141, 0.427, 0.095, and 0.338, respectively. The average molecular weight of glatiramer acetate is 5,000 – 9,000 daltons. Glatiramer acetate is identified by specific antibodies. Chemically, glatiramer acetate is designated L-glutamic acid polymer with L-alanine, L-lysine and L-tyrosine, acetate (salt). Its structural formula is. Glatiramer acetate injection is a clear, colorless to slightly yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 1 mL of glatiramer acetate injection solution contains 20 mg or 40 mg of glatiramer acetate and the following inactive ingredient: 40 mg of mannitol. The pH of the solutions is approximately 5.5 to 7.0. The biological activity of glatiramer acetate is determined by its ability to block the induction of experimental autoimmune encephalomyelitis (EAE) in mice."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70710-1552-6</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70710-1552-6) </PackageDescription>
<NDC11Code>70710-1552-06</NDC11Code>
<ProductNDC>70710-1552</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Selexipag</ProprietaryName>
<NonProprietaryName>Selexipag</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214302</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>SELEXIPAG</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Prostacyclin Receptor Agonist [EPC], Prostacyclin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250214</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Selexipag tablets are a prostacyclin receptor agonist indicated for the treatment of pulmonary arterial hypertension (PAH, WHO Group I): : 1 In adults to delay disease progression and reduce the risk of hospitalization for PAH. (1.1).</IndicationAndUsage>
<Description>Selexipag tablets contains selexipag, a prostacyclin receptor agonist. The chemical name of selexipag is 2-{4-[(5,6-diphenylpyrazin-2-yl)(isopropyl)amino]butoxy}-N(methylsulfonyl) acetamide. It has a molecular formula of C26H32N4O4S and a molecular weight of 496.62. Selexipag has the following structural formula. Selexipag is an off white to pale yellow crystalline powder that is practically insoluble in water. In the solid state selexipag is very stable, is not hygroscopic, and is not light sensitive. Depending on the dose strength, each round film-coated tablet for oral administration contains 200 mcg, 400 mcg, 600 mcg, 800 mcg, 1,000 mcg, 1,200 mcg, 1,400 mcg, or 1,600 mcg of selexipag. The tablets include the following inactive ingredients: corn starch, colloidal silicon dioxide, hydroxypropyl cellulose, low substituted hydroxypropyl cellulose, microcrystalline cellulose and magnesium stearate. The tablets are film coated with a coating material containing hypromellose, propylene glycol, carnauba wax, titanium dioxide, along with mixtures of ferrosoferric oxide, iron oxide red or iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>24286-1552-6</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (24286-1552-6) > 60 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>24286-1552-06</NDC11Code>
<ProductNDC>24286-1552</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Purgasol</ProprietaryName>
<NonProprietaryName>Sennosides Docusate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>DLC Laboratories, Inc.</LabelerName>
<SubstanceName>SENNOSIDES; DOCUSATE SODIUM</SubstanceName>
<StrengthNumber>8.6; 50</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1552-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1552-3) / 1 CARTON in 1 POUCH (51662-1552-2) / 1 VIAL, SINGLE-USE in 1 CARTON / 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>51662-1552-03</NDC11Code>
<ProductNDC>51662-1552</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>JELLY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086283</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Jelly USP, 2% is indicated for prevention and control of pain in procedures involving the male and female urethra for topical treatment of painful urethritis, and as an anesthetic lubricant for endotracheal intubation (oral and nasal).</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Jelly USP, 2% is a sterile aqueous product that contains a local anesthetic agent and is administered topically. See INDICATIONS for specific uses. Lidocaine Hydrochloride Jelly USP, 2% contains lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula. Composition of Lidocaine Hydrochloride Jelly USP, 2%. Each mL contains 20 mg of lidocaine hydrochloride, and sodium carboxymethylcellulose as a viscosity-increasing agent. Sodium hydroxide may have been added to adjust pH to meet USP limits of 6 to 7. Carboxymethylcellulose sodium adjusts the resulting mixture to a suitable consistency, to enhance contact with mucosa and provide lubrication for instrumentation. This product contains no preservative and any unused portion should be discarded after initial use.</Description>
</NDC>
<NDC>
<NDCCode>67046-1552-3</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (67046-1552-3) </PackageDescription>
<NDC11Code>67046-1552-03</NDC11Code>
<ProductNDC>67046-1552</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202297</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clonidine hydrochloride tablets, USP are indicated in the treatment of hypertension. Clonidine hydrochloride tablets, USP may be employed alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
<Description>Clonidine hydrochloride, USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The inactive ingredients are colloidal silicon dioxide, corn starch, calcium phosphate dibasic, hydroxypropyl cellulose, microcrystalline cellulose, lactose monohydrate and magnesium stearate. In addition, the 0.1 mg tablets contain FD&C Red No. 40, and the 0.2 mg and 0.3 mg tablets contain FD&C Yellow No. 6 as color additives respectively. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>70710-1006-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1006-6) </PackageDescription>
<NDC11Code>70710-1006-06</NDC11Code>
<ProductNDC>70710-1006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Misoprostol</ProprietaryName>
<NonProprietaryName>Misoprostol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210201</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MISOPROSTOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1007-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1007-6) </PackageDescription>
<NDC11Code>70710-1007-06</NDC11Code>
<ProductNDC>70710-1007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Misoprostol</ProprietaryName>
<NonProprietaryName>Misoprostol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210201</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MISOPROSTOL</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1021-6</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (70710-1021-6) </PackageDescription>
<NDC11Code>70710-1021-06</NDC11Code>
<ProductNDC>70710-1021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albendazole</ProprietaryName>
<NonProprietaryName>Albendazole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208979</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALBENDAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).</IndicationAndUsage>
<Description>Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1050-6</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (70710-1050-6) </PackageDescription>
<NDC11Code>70710-1050-06</NDC11Code>
<ProductNDC>70710-1050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210575</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>70710-1051-6</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (70710-1051-6) </PackageDescription>
<NDC11Code>70710-1051-06</NDC11Code>
<ProductNDC>70710-1051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210575</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>70710-1165-6</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70710-1165-6) / 60 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70710-1165-06</NDC11Code>
<ProductNDC>70710-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oseltamivir Phosphate</ProprietaryName>
<NonProprietaryName>Oseltamivir Phosphate</NonProprietaryName>
<DosageFormName>FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209113</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OSELTAMIVIR PHOSPHATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oseltamivir Phosphate is an influenza neuraminidase inhibitor (NAI) indicated for: 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. (1.1), 2 Prophylaxis of influenza A and B in patients 1 year and older. (1.2).</IndicationAndUsage>
<Description>Oseltamivir Phosphate for Oral Suspension, an influenza neuraminidase inhibitor (NAI), is available as a powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains sorbitol, titanium dioxide, xanthan gum, sodium benzoate, monosodium citrate, tutti-frutti flavoring, and saccharin sodium. Oseltamivir phosphate is a white crystalline solid with the chemical name (3R,4R,5S)-4-acetylamino-5- amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C16H28N2O4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows.</Description>
</NDC>
<NDC>
<NDCCode>70710-1205-6</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1205-6) </PackageDescription>
<NDC11Code>70710-1205-06</NDC11Code>
<ProductNDC>70710-1205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl Fumarate</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210538</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200928</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>70710-1243-6</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70710-1243-6) </PackageDescription>
<NDC11Code>70710-1243-06</NDC11Code>
<ProductNDC>70710-1243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tofacitinib</ProprietaryName>
<NonProprietaryName>Tofacitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209829</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TOFACITINIB CITRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tofacitinib tablets are Janus kinase (JAK) inhibitors. Tofacitinib tablets are indicated for the treatment of adult patients with: 1 Moderately to severely active rheumatoid arthritis (RA),who have had an inadequate response or intolerance to one or more TNF blockers., 2 Active psoriatic arthritis (PsA),who have had an inadequate response or intolerance to one or more TNF blockers., 3 Active ankylosing spondylitis (AS),who have had an inadequate response or intolerance to one or more TNF blockers., 4 Moderately to severely active ulcerative colitis (UC),who have had an inadequate response or intolerance to one or more TNF blockers.</IndicationAndUsage>
<Description>Tofacitinib tablets are formulated with the citrate salt of tofacitinib, a JAK inhibitor. Tofacitinib citrate is a white to off-white powder and soluble in dimethylsulfoxide and. insoluble in water with the following chemical name: (3R,4R)-4-methyl-3-(methyl-7Hpyrrolo [2,3-d]pyrimidin-4-ylamino)-ß-oxo-1-piperidinepropanenitrile, 2-hydroxy-1,2,3- propanetricarboxylate (1:1). The solubility of tofacitinib citrate in water is 2.9 mg/mL. Tofacitinib citrate has a molecular weight of 504.5 Daltons (or 312.4 Daltons as the. tofacitinib free base) and a molecular formula of C16H20N6OC6H8O7. The chemical. structure of tofacitinib citrate is. Each 5 mg and 10 mg film-coated tablet contains tofacitinib equivalent to 8.08 mg and 16.15 mg of tofacitinib citrate respectively for oral administration and contains following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and titanium dioxide. Additionally, each 10 mg tablet contains FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1272-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1272-6) </PackageDescription>
<NDC11Code>70710-1272-06</NDC11Code>
<ProductNDC>70710-1272</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213719</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1273-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1273-6) </PackageDescription>
<NDC11Code>70710-1273-06</NDC11Code>
<ProductNDC>70710-1273</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213719</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1274-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1274-6) </PackageDescription>
<NDC11Code>70710-1274-06</NDC11Code>
<ProductNDC>70710-1274</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213719</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1302-7</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 POUCH (70710-1302-7) / 6 SUPPOSITORY in 1 BLISTER PACK (70710-1302-6) </PackageDescription>
<NDC11Code>70710-1302-07</NDC11Code>
<ProductNDC>70710-1302</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20200214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208953</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine is an aminosalicylate indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
<Description>The active ingredient in Mesalamine suppositories, USP 1000 mg is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each Mesalamine suppository, USP contains 1000 mg of mesalamine, USP (micronized) in a base of hard fat. Mesalamine, USP (micronized) are light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. It is slightly soluble in water; very slightly soluble in methanol, in dehydrated alcohol, and in acetone; practically insoluble in n-butyl alcohol, in chloroform, in ether, in ethyl acetate, in n-hexane, in methylene chloride, and in n-propyl alcohol; soluble in dilute hydrochloric acid and in dilute alkali hydroxides. The molecular formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>70710-1359-6</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70710-1359-6) / 20 mL in 1 VIAL (70710-1359-1) </PackageDescription>
<NDC11Code>70710-1359-06</NDC11Code>
<ProductNDC>70710-1359</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209465</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220629</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
<Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>70710-1461-6</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70710-1461-6) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>70710-1461-06</NDC11Code>
<ProductNDC>70710-1461</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol Decanoate</ProprietaryName>
<NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20191114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211180</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol decanoate is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
<Description>Haloperidol decanoate, USP is the decanoate ester of the butyrophenone, haloperidol. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]-4 piperidinyl decanoate, is. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate, USP is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of Haloperidol decanoate injection, 50 mg/mL for IM injection contains 50 mg haloperidol (present as haloperidol decanoate, USP 70.52 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative. Each mL of Haloperidol decanoate injection, 100 mg/mL for IM injection contains 100 mg haloperidol (present as haloperidol decanoate, USP 141.04 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>70710-1471-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1471-6) </PackageDescription>
<NDC11Code>70710-1471-06</NDC11Code>
<ProductNDC>70710-1471</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ivabradine</ProprietaryName>
<NonProprietaryName>Ivabradine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213442</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>IVABRADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hyperpolarization-activated Cyclic Nucleotide-gated Channel Antagonists [MoA], Hyperpolarization-activated Cyclic Nucleotide-gated Channel Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker indicated: : 1 To reduce the risk of hospitalization for worsening heart failure in adult patients with stable, symptomatic chronic heart failure with reduced left ventricular ejection fraction. (1.1).</IndicationAndUsage>
<Description>Ivabradine tablet contains ivabradine as the active pharmaceutical ingredient. Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker that reduces the spontaneous pacemaker activity of the cardiac sinus node by selectively inhibiting the If current, resulting in heart rate reduction with no effect on ventricular· repolarization and no effects on myocardial contractility. The chemical name for ivabradine hydrochloride is 3-(3-{[((7S)-3,4-Dimethoxybicyclo[4.2.0]octa-1,3,5-trien-7-yl)methyl] methyl amino} propyl)-1,3,4,5-tetrahydro-7,8-dimethoxy-2H-3-benzazepin-2-one, hydrochloride. The molecular formula is C27H36N2O5, HCl and the molecular weight (free base + HCl) is 505.05 (468.59 + 36.46). The chemical structure of ivabradine is shown in Figure 1. Figure 1. Chemical Structure of Ivabradine. Ivabradine tablets are supplied in 5 mg and 7.5 mg tablets for oral administration. The tablets contain 5 mg and 7.5 mg of ivabradine, as the active ingredient, equivalent to 5.39 mg and 8.085 mg of ivabradine hydrochloride, respectively. Each film-coated tablet contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, D&C yellow #10 aluminum lake, D&C red #27/phloxine aluminum lake, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1472-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1472-6) </PackageDescription>
<NDC11Code>70710-1472-06</NDC11Code>
<ProductNDC>70710-1472</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ivabradine</ProprietaryName>
<NonProprietaryName>Ivabradine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213442</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>IVABRADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hyperpolarization-activated Cyclic Nucleotide-gated Channel Antagonists [MoA], Hyperpolarization-activated Cyclic Nucleotide-gated Channel Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker indicated: : 1 To reduce the risk of hospitalization for worsening heart failure in adult patients with stable, symptomatic chronic heart failure with reduced left ventricular ejection fraction. (1.1).</IndicationAndUsage>
<Description>Ivabradine tablet contains ivabradine as the active pharmaceutical ingredient. Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker that reduces the spontaneous pacemaker activity of the cardiac sinus node by selectively inhibiting the If current, resulting in heart rate reduction with no effect on ventricular· repolarization and no effects on myocardial contractility. The chemical name for ivabradine hydrochloride is 3-(3-{[((7S)-3,4-Dimethoxybicyclo[4.2.0]octa-1,3,5-trien-7-yl)methyl] methyl amino} propyl)-1,3,4,5-tetrahydro-7,8-dimethoxy-2H-3-benzazepin-2-one, hydrochloride. The molecular formula is C27H36N2O5, HCl and the molecular weight (free base + HCl) is 505.05 (468.59 + 36.46). The chemical structure of ivabradine is shown in Figure 1. Figure 1. Chemical Structure of Ivabradine. Ivabradine tablets are supplied in 5 mg and 7.5 mg tablets for oral administration. The tablets contain 5 mg and 7.5 mg of ivabradine, as the active ingredient, equivalent to 5.39 mg and 8.085 mg of ivabradine hydrochloride, respectively. Each film-coated tablet contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, D&C yellow #10 aluminum lake, D&C red #27/phloxine aluminum lake, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1514-6</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (70710-1514-6) / .5 mL in 1 SYRINGE (70710-1514-2) </PackageDescription>
<NDC11Code>70710-1514-06</NDC11Code>
<ProductNDC>70710-1514</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fondaparinux Sodium</ProprietaryName>
<NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208615</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
</NDC>
<NDC>
<NDCCode>70710-1515-6</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (70710-1515-6) / .4 mL in 1 SYRINGE (70710-1515-2) </PackageDescription>
<NDC11Code>70710-1515-06</NDC11Code>
<ProductNDC>70710-1515</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fondaparinux Sodium</ProprietaryName>
<NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208615</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/.4mL</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
</NDC>
<NDC>
<NDCCode>70710-1516-6</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (70710-1516-6) / .6 mL in 1 SYRINGE (70710-1516-2) </PackageDescription>
<NDC11Code>70710-1516-06</NDC11Code>
<ProductNDC>70710-1516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fondaparinux Sodium</ProprietaryName>
<NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208615</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/.6mL</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
</NDC>
<NDC>
<NDCCode>70710-1516-9</NDCCode>
<PackageDescription>2 SYRINGE in 1 CARTON (70710-1516-9) / .6 mL in 1 SYRINGE (70710-1516-2) </PackageDescription>
<NDC11Code>70710-1516-09</NDC11Code>
<ProductNDC>70710-1516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fondaparinux Sodium</ProprietaryName>
<NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208615</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/.6mL</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
</NDC>
<NDC>
<NDCCode>70710-1517-6</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (70710-1517-6) / .8 mL in 1 SYRINGE (70710-1517-2) </PackageDescription>
<NDC11Code>70710-1517-06</NDC11Code>
<ProductNDC>70710-1517</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fondaparinux Sodium</ProprietaryName>
<NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208615</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/.8mL</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
</NDC>
<NDC>
<NDCCode>70710-1532-6</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70710-1532-6) / 5 mL in 1 VIAL (70710-1532-1) </PackageDescription>
<NDC11Code>70710-1532-06</NDC11Code>
<ProductNDC>70710-1532</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212171</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
<Description>Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. The pH of cisatracurium besylate injection, USP is between 3.25 and 3.65.</Description>
</NDC>
<NDC>
<NDCCode>70710-1533-6</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70710-1533-6) > 10 mL in 1 VIAL (70710-1533-1) </PackageDescription>
<NDC11Code>70710-1533-06</NDC11Code>
<ProductNDC>70710-1533</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213527</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
<Description>Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium besylate injection USP is a sterile, non-pyrogenic aqueous solution provided in 10 mL vial. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. : 1 The 10 mL multiple-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate, and 0.9% benzyl alcohol as a preservative.</Description>
</NDC>
<NDC>
<NDCCode>70710-1534-6</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70710-1534-6) / 20 mL in 1 VIAL (70710-1534-1) </PackageDescription>
<NDC11Code>70710-1534-06</NDC11Code>
<ProductNDC>70710-1534</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cisatracurium Besylate</ProprietaryName>
<NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212171</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
<Description>Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. The pH of cisatracurium besylate injection, USP is between 3.25 and 3.65.</Description>
</NDC>
<NDC>
<NDCCode>70710-1537-6</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1537-6) </PackageDescription>
<NDC11Code>70710-1537-06</NDC11Code>
<ProductNDC>70710-1537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140527</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090728</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140527</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major Depressive Disorder [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)], 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)], 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].</IndicationAndUsage>
<Description>Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1- naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is:. Duloxetine hydrochloride, USP is a white to slightly brownish white solid, which is soluble in methanol and chloroform and slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4 mg or 33.7 mg or 67.3 mg of duloxetine hydrochloride, USP equivalent to 20 mg or 30 mg or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. In addition, each capsule contains following inactive ingredients: gelatin, hypromellose, hypromellose phthalate, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. Sugar spheres contain corn starch and sucrose. Additionally each 20 mg capsule shell contains D&C yellow # 10, FD&C blue # 1 and FD&C yellow # 6, each 30 mg capsule shell contains D&C yellow # 10, FD&C blue # 1, FD&C red # 40 and FD&C yellow # 6 and each 60 mg capsule shell contains FD&C blue # 1, FD&C red # 40. Each capsule shell is printed with golden pharmaceutical ink which contains the following inactive ingredients: butyl alcohol, dehydrated alcohol, isopropyl alcohol, propylene glycol, shellac, strong ammonia solution and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1549-6</NDCCode>
<PackageDescription>12 BLISTER PACK in 1 CARTON (70710-1549-6) / 1 SYRINGE in 1 BLISTER PACK / 1 mL in 1 SYRINGE (70710-1549-2) </PackageDescription>
<NDC11Code>70710-1549-06</NDC11Code>
<ProductNDC>70710-1549</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glatiramer Acetate</ProprietaryName>
<NonProprietaryName>Glatiramer Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20251110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208468</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>GLATIRAMER ACETATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glatiramer acetate injection is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Glatiramer acetate, the active ingredient of glatiramer acetate injection, consists of the acetate salts of synthetic polypeptides, containing four naturally occurring amino acids: L-glutamic acid, L-alanine, L-tyrosine, and L-lysine with an average molar fraction of 0.141, 0.427, 0.095, and 0.338, respectively. The average molecular weight of glatiramer acetate is 5,000 – 9,000 daltons. Glatiramer acetate is identified by specific antibodies. Chemically, glatiramer acetate is designated L-glutamic acid polymer with L-alanine, L-lysine and L-tyrosine, acetate (salt). Its structural formula is. Glatiramer acetate injection is a clear, colorless to slightly yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 1 mL of glatiramer acetate injection solution contains 20 mg or 40 mg of glatiramer acetate and the following inactive ingredient: 40 mg of mannitol. The pH of the solutions is approximately 5.5 to 7.0. The biological activity of glatiramer acetate is determined by its ability to block the induction of experimental autoimmune encephalomyelitis (EAE) in mice.</Description>
</NDC>
</NDCList>