RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70710-1651-6</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70710-1651-6)  / 5 mL in 1 VIAL, SINGLE-DOSE (70710-1651-1) </PackageDescription>
    <NDC11Code>70710-1651-06</NDC11Code>
    <ProductNDC>70710-1651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sugammadex</ProprietaryName>
    <NonProprietaryName>Sugammadex</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20260702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214290</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>SUGAMMADEX SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>gamma-Cyclodextrins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260702</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp &amp; Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp &amp; Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
    <Description>Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin sodium salt (1:8) with a molecular weight of 2178.01. The structural formula is. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear, colorless to slightly yellow-brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to108.8 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2 -carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-1651-6</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (71335-1651-6) </PackageDescription>
    <NDC11Code>71335-1651-06</NDC11Code>
    <ProductNDC>71335-1651</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Allergy Relief</ProprietaryName>
    <ProprietaryNameSuffix>Non Drowsy</ProprietaryNameSuffix>
    <NonProprietaryName>Loratadine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20191227</StartMarketingDate>
    <EndMarketingDate>20251227</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075209</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>LORATADINE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-12-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <EndMarketingDatePackage>20251227</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes , 4 itching of the nose or throat.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0527-1651-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (0527-1651-01) </PackageDescription>
    <NDC11Code>00527-1651-01</NDC11Code>
    <ProductNDC>0527-1651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
    <NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170622</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207172</ApplicationNumber>
    <LabelerName>Lannett Company, Inc.</LabelerName>
    <SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
    <StrengthNumber>325; 10</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydrocodone Bitartrate and Acetaminophen Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Hydrocodone Bitartrate and Acetaminophen Tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/325 mg contains:. Hydrocodone Bitartrate ...... 5 mg. Acetaminophen ................. 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/325 mg contains:. Hydrocodone Bitartrate ......... 7.5 mg. Acetaminophen ................ 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/325 mg contains:. Hydrocodone Bitartrate .......... 10 mg. Acetaminophen .............. 325 mg. In addition, each tablet contains the following inactive ingredients: 5 mg/325 mg tablet contains the following inactive ingredients: pregelatinized starch, sugar spheres which are composed of starch derived from corn, sucrose, and FD&amp;C Red #40, crospovidone, microcrystalline cellulose, stearic acid, magnesium stearate, and colloidal silicon dioxide. Each 7.5 mg/325 mg and 10 mg/325 mg tablet contains the following inactive ingredients: pregelatinized starch, microcrystalline cellulose, crospovidone, stearic acid, magnesium stearate, and colloidal silicon dioxide. Meets USP Dissolution Test 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>0527-1651-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (0527-1651-05) </PackageDescription>
    <NDC11Code>00527-1651-05</NDC11Code>
    <ProductNDC>0527-1651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
    <NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170622</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207172</ApplicationNumber>
    <LabelerName>Lannett Company, Inc.</LabelerName>
    <SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
    <StrengthNumber>325; 10</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydrocodone Bitartrate and Acetaminophen Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Hydrocodone Bitartrate and Acetaminophen Tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or opioid combination products): 1 Have not been tolerated or are not expected to be tolerated,, 2 Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Hydrocodone Bitartrate and Acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 5 mg/325 mg contains:. Hydrocodone Bitartrate ...... 5 mg. Acetaminophen ................. 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, 7.5 mg/325 mg contains:. Hydrocodone Bitartrate ......... 7.5 mg. Acetaminophen ................ 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablets, 10 mg/325 mg contains:. Hydrocodone Bitartrate .......... 10 mg. Acetaminophen .............. 325 mg. In addition, each tablet contains the following inactive ingredients: 5 mg/325 mg tablet contains the following inactive ingredients: pregelatinized starch, sugar spheres which are composed of starch derived from corn, sucrose, and FD&amp;C Red #40, crospovidone, microcrystalline cellulose, stearic acid, magnesium stearate, and colloidal silicon dioxide. Each 7.5 mg/325 mg and 10 mg/325 mg tablet contains the following inactive ingredients: pregelatinized starch, microcrystalline cellulose, crospovidone, stearic acid, magnesium stearate, and colloidal silicon dioxide. Meets USP Dissolution Test 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>22840-1651-1</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-1651-1) </PackageDescription>
    <NDC11Code>22840-1651-01</NDC11Code>
    <ProductNDC>22840-1651</ProductNDC>
    <ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
    <ProprietaryName>Chaetomium Globosum</ProprietaryName>
    <NonProprietaryName>Chaetomium Globosum</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19810915</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101833</ApplicationNumber>
    <LabelerName>Greer Laboratories, Inc.</LabelerName>
    <SubstanceName>CHAETOMIUM GLOBOSUM</SubstanceName>
    <StrengthNumber>.001</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19810915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
    <Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1651-1</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, SINGLE-DOSE (51662-1651-1) </PackageDescription>
    <NDC11Code>51662-1651-01</NDC11Code>
    <ProductNDC>51662-1651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20130314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203082</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C14H22N2O  HCl) has the following structural formula:. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>68071-1651-5</NDCCode>
    <PackageDescription>10 mL in 1 BOX (68071-1651-5) </PackageDescription>
    <NDC11Code>68071-1651-05</NDC11Code>
    <ProductNDC>68071-1651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Polymyxin B Sulfate And Trimethoprim</ProprietaryName>
    <NonProprietaryName>Polymyxin B Sulfate And Trimethoprim Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>19970214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064120</ApplicationNumber>
    <LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
    <SubstanceName>POLYMYXIN B SULFATE; TRIMETHOPRIM SULFATE</SubstanceName>
    <StrengthNumber>10000; 1</StrengthNumber>
    <StrengthUnit>[USP'U]/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Dihydrofolate Reductase Inhibitor Antibacterial [EPC], Dihydrofolate Reductase Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Polymyxin B sulfate and trimethoprim ophthalmic solution is indicated in the treatment of surface ocular bacterial infections, including acute bacterial conjunctivitis, and blepharoconjunctivitis, caused by susceptible strains of the following microorganisms: Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pneumoniae, Streptococcus viridans, Haemophilus influenzae and Pseudomonas aeruginosa.**. **Efficacy for this organism in this organ system was studied in fewer than 10 infections.</IndicationAndUsage>
    <Description>Polymyxin B Sulfate and Trimethoprim Ophthalmic Solution, USP* is a sterile antimicrobial solution for topical ophthalmic use. It has a pH of 4.0 to 6.2 and osmolality of 270 to 310 mOsm/kg. Chemical Names: Trimethoprim sulfate, 2,4-diamino-5-(3,4 5-trimethoxybenzyl)pyrimidine sulfate (2:1), is a white, odorless, crystalline powder with a molecular weight of 678.72 and the following structural formula:. C 28H 38N 8O 10S Mol. Wt. 678.72. Polymyxin B sulfate is the sulfate salt of polymyxin B 1 and B 2 which are produced by the growth of Bacillus polymyxa  (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formula is:. Each mL contains: ACTIVES: Polymyxin B Sulfate equal to 10,000 polymyxin B units, Trimethoprim Sulfate (equivalent to trimethoprim 1 mg); INACTIVES: Purified Water, Sodium Chloride. Sulfuric acid and, if necessary, sodium hydroxide may be added to adjust pH (4.0 – 6.2). PRESERVATIVE ADDED: Benzalkonium Chloride 0.004%.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1006-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (70710-1006-6) </PackageDescription>
    <NDC11Code>70710-1006-06</NDC11Code>
    <ProductNDC>70710-1006</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Misoprostol</ProprietaryName>
    <NonProprietaryName>Misoprostol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200114</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210201</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
    <SubstanceName>MISOPROSTOL</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200114</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70710-1007-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (70710-1007-6) </PackageDescription>
    <NDC11Code>70710-1007-06</NDC11Code>
    <ProductNDC>70710-1007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Misoprostol</ProprietaryName>
    <NonProprietaryName>Misoprostol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200114</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210201</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
    <SubstanceName>MISOPROSTOL</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200114</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>70710-1021-6</NDCCode>
    <PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (70710-1021-6) </PackageDescription>
    <NDC11Code>70710-1021-06</NDC11Code>
    <ProductNDC>70710-1021</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albendazole</ProprietaryName>
    <NonProprietaryName>Albendazole</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181217</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208979</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ALBENDAZOLE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200511</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).</IndicationAndUsage>
    <Description>Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1050-6</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (70710-1050-6) </PackageDescription>
    <NDC11Code>70710-1050-06</NDC11Code>
    <ProductNDC>70710-1050</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atazanavir</ProprietaryName>
    <NonProprietaryName>Atazanavir</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210504</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210575</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210504</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1   Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2   Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .</IndicationAndUsage>
    <Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&amp;C Blue 1, D&amp;C Red 28, FD &amp;C Red 40 and D&amp;C Yellow 10. Each 200 mg capsule shell contains: FD&amp;C Blue 1 and D&amp;C Red 28. Each 300 mg capsule shell contains: FD&amp;C Blue 1, D&amp;C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1051-6</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (70710-1051-6) </PackageDescription>
    <NDC11Code>70710-1051-06</NDC11Code>
    <ProductNDC>70710-1051</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atazanavir</ProprietaryName>
    <NonProprietaryName>Atazanavir</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210504</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210575</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210504</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1   Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2   Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .</IndicationAndUsage>
    <Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&amp;C Blue 1, D&amp;C Red 28, FD &amp;C Red 40 and D&amp;C Yellow 10. Each 200 mg capsule shell contains: FD&amp;C Blue 1 and D&amp;C Red 28. Each 300 mg capsule shell contains: FD&amp;C Blue 1, D&amp;C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1165-6</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (70710-1165-6)  / 60 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>70710-1165-06</NDC11Code>
    <ProductNDC>70710-1165</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oseltamivir Phosphate</ProprietaryName>
    <NonProprietaryName>Oseltamivir Phosphate</NonProprietaryName>
    <DosageFormName>FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170914</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209113</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>OSELTAMIVIR PHOSPHATE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170914</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oseltamivir Phosphate is an influenza neuraminidase inhibitor (NAI) indicated for: 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. (1.1), 2 Prophylaxis of influenza A and B in patients 1 year and older. (1.2).</IndicationAndUsage>
    <Description>Oseltamivir Phosphate for Oral Suspension, an influenza neuraminidase inhibitor (NAI), is available as a powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains sorbitol, titanium dioxide, xanthan gum, sodium benzoate, monosodium citrate, tutti-frutti flavoring, and saccharin sodium. Oseltamivir phosphate is a white crystalline solid with the chemical name (3R,4R,5S)-4-acetylamino-5- amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C16H28N2O4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1205-6</NDCCode>
    <PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1205-6) </PackageDescription>
    <NDC11Code>70710-1205-06</NDC11Code>
    <ProductNDC>70710-1205</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dimethyl Fumarate</ProprietaryName>
    <NonProprietaryName>Dimethyl Fumarate</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200928</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210538</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DIMETHYL FUMARATE</SubstanceName>
    <StrengthNumber>240</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-04-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200928</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
    <Description>Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4).  It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&amp;C Yellow#10, FD&amp;C Blue#1, FD&amp;C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1243-6</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70710-1243-6) </PackageDescription>
    <NDC11Code>70710-1243-06</NDC11Code>
    <ProductNDC>70710-1243</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tofacitinib</ProprietaryName>
    <NonProprietaryName>Tofacitinib</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260511</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209829</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>TOFACITINIB CITRATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260511</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tofacitinib tablets are Janus kinase (JAK) inhibitors. Tofacitinib tablets are indicated for the treatment of adult patients with: 1 Moderately to severely active rheumatoid arthritis (RA),who have had an inadequate response or intolerance to one or more TNF blockers., 2 Active psoriatic arthritis (PsA),who have had an inadequate response or intolerance to one or more TNF blockers., 3 Active ankylosing spondylitis (AS),who have had an inadequate response or intolerance to one or more TNF blockers., 4 Moderately to severely active ulcerative colitis (UC),who have had an inadequate response or intolerance to one or more TNF blockers.</IndicationAndUsage>
    <Description>Tofacitinib tablets are formulated with the citrate salt of tofacitinib, a JAK inhibitor. Tofacitinib citrate is a white to off-white powder and soluble in dimethylsulfoxide and. insoluble in water with the following chemical name: (3R,4R)-4-methyl-3-(methyl-7Hpyrrolo [2,3-d]pyrimidin-4-ylamino)-ß-oxo-1-piperidinepropanenitrile, 2-hydroxy-1,2,3- propanetricarboxylate (1:1). The solubility of tofacitinib citrate in water is 2.9 mg/mL. Tofacitinib citrate has a molecular weight of 504.5 Daltons (or 312.4 Daltons as the. tofacitinib free base) and a molecular formula of C16H20N6OC6H8O7. The chemical. structure of tofacitinib citrate is. Each 5 mg and 10 mg film-coated tablet contains tofacitinib equivalent to 8.08 mg and 16.15 mg of tofacitinib citrate respectively for oral administration and contains following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and titanium dioxide. Additionally, each 10 mg tablet contains FD&amp;C blue #1 Aluminum Lake and iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1272-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (70710-1272-6) </PackageDescription>
    <NDC11Code>70710-1272-06</NDC11Code>
    <ProductNDC>70710-1272</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250708</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213719</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>24; 26</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250708</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&amp;C blue #2 Aluminum Lake, FD&amp;C red #40 Aluminum Lake and FD&amp;C yellow #5 (tartrazine) Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1273-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (70710-1273-6) </PackageDescription>
    <NDC11Code>70710-1273-06</NDC11Code>
    <ProductNDC>70710-1273</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250708</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213719</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>49; 51</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250708</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&amp;C blue #2 Aluminum Lake, FD&amp;C red #40 Aluminum Lake and FD&amp;C yellow #5 (tartrazine) Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1274-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (70710-1274-6) </PackageDescription>
    <NDC11Code>70710-1274-06</NDC11Code>
    <ProductNDC>70710-1274</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250708</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213719</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250708</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&amp;C blue #2 Aluminum Lake, FD&amp;C red #40 Aluminum Lake and FD&amp;C yellow #5 (tartrazine) Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1302-7</NDCCode>
    <PackageDescription>5 BLISTER PACK in 1 POUCH (70710-1302-7)  / 6 SUPPOSITORY in 1 BLISTER PACK (70710-1302-6) </PackageDescription>
    <NDC11Code>70710-1302-07</NDC11Code>
    <ProductNDC>70710-1302</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mesalamine</ProprietaryName>
    <NonProprietaryName>Mesalamine</NonProprietaryName>
    <DosageFormName>SUPPOSITORY</DosageFormName>
    <RouteName>RECTAL</RouteName>
    <StartMarketingDate>20200214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208953</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>MESALAMINE</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mesalamine is an aminosalicylate indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
    <Description>The active ingredient in Mesalamine suppositories, USP 1000 mg is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each Mesalamine suppository, USP contains 1000 mg of mesalamine, USP (micronized) in a base of hard fat. Mesalamine, USP (micronized) are light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. It is slightly soluble in water; very slightly soluble in methanol, in dehydrated alcohol, and in acetone; practically insoluble in n-butyl alcohol, in chloroform, in ether, in ethyl acetate, in n-hexane, in methylene chloride, and in n-propyl alcohol; soluble in dilute hydrochloric acid and in dilute alkali hydroxides. The molecular formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1359-6</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70710-1359-6)  / 20 mL in 1 VIAL (70710-1359-1) </PackageDescription>
    <NDC11Code>70710-1359-06</NDC11Code>
    <ProductNDC>70710-1359</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lacosamide</ProprietaryName>
    <NonProprietaryName>Lacosamide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220629</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209465</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>LACOSAMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-05-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220629</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lacosamide is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older (1.2).</IndicationAndUsage>
    <Description>The chemical name of lacosamide, the single (R)-enantiomer, is (R)-2-acetamido-N-benzyl-3-methoxypropionamide (IUPAC). Lacosamide is a functionalized amino acid. Its molecular formula is C13H18N2O3 and its molecular weight is 250.30. The chemical structure is. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1461-6</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70710-1461-6)  / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>70710-1461-06</NDC11Code>
    <ProductNDC>70710-1461</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol Decanoate</ProprietaryName>
    <NonProprietaryName>Haloperidol Decanoate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20191114</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211180</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>HALOPERIDOL DECANOATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191114</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol decanoate is indicated for the treatment of schizophrenia in adults who were previously taking a stable dosage of an immediate-release oral haloperidol product.</IndicationAndUsage>
    <Description>Haloperidol decanoate, USP is the decanoate ester of the butyrophenone, haloperidol. It has a markedly extended duration of effect. It is available in sesame oil in sterile form for intramuscular (IM) injection. The structural formula of haloperidol decanoate, 4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]-4 piperidinyl decanoate, is. The molecular formula is C31H41CIFNO3 and has a molecular weight of 530.12. Haloperidol decanoate, USP is almost insoluble in water (0.01 mg/mL), but is soluble in most organic solvents. Each mL of Haloperidol decanoate injection, 50 mg/mL for IM injection contains 50 mg haloperidol (present as haloperidol decanoate, USP 70.52 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative. Each mL of Haloperidol decanoate injection, 100 mg/mL for IM injection contains 100 mg haloperidol (present as haloperidol decanoate, USP 141.04 mg) in a sesame oil vehicle, with 1.2% (w/v) benzyl alcohol as a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1471-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (70710-1471-6) </PackageDescription>
    <NDC11Code>70710-1471-06</NDC11Code>
    <ProductNDC>70710-1471</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ivabradine</ProprietaryName>
    <NonProprietaryName>Ivabradine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213442</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>IVABRADINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Hyperpolarization-activated Cyclic Nucleotide-gated Channel Antagonists [MoA], Hyperpolarization-activated Cyclic Nucleotide-gated Channel Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240702</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker indicated: : 1 To reduce the risk of hospitalization for worsening heart failure in adult patients with stable, symptomatic chronic heart failure with reduced left ventricular ejection fraction. (1.1).</IndicationAndUsage>
    <Description>Ivabradine tablet contains ivabradine as the active pharmaceutical ingredient. Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker that reduces the spontaneous pacemaker activity of the cardiac sinus node by selectively inhibiting the If current, resulting in heart rate reduction with no effect on ventricular· repolarization and no effects on myocardial contractility. The chemical name for ivabradine hydrochloride is 3-(3-{[((7S)-3,4-Dimethoxybicyclo[4.2.0]octa-1,3,5-trien-7-yl)methyl] methyl amino} propyl)-1,3,4,5-tetrahydro-7,8-dimethoxy-2H-3-benzazepin-2-one, hydrochloride. The molecular formula is C27H36N2O5, HCl and the molecular weight (free base + HCl) is 505.05 (468.59 + 36.46). The chemical structure of ivabradine is shown in Figure 1. Figure 1. Chemical Structure of Ivabradine. Ivabradine tablets are supplied in 5 mg and 7.5 mg tablets for oral administration. The tablets contain 5 mg and 7.5 mg of ivabradine, as the active ingredient, equivalent to 5.39 mg and 8.085 mg of ivabradine hydrochloride, respectively. Each film-coated tablet contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, D&amp;C yellow #10 aluminum lake, D&amp;C red #27/phloxine aluminum lake, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1472-6</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (70710-1472-6) </PackageDescription>
    <NDC11Code>70710-1472-06</NDC11Code>
    <ProductNDC>70710-1472</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ivabradine</ProprietaryName>
    <NonProprietaryName>Ivabradine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240702</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213442</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>IVABRADINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Hyperpolarization-activated Cyclic Nucleotide-gated Channel Antagonists [MoA], Hyperpolarization-activated Cyclic Nucleotide-gated Channel Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240702</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker indicated: : 1 To reduce the risk of hospitalization for worsening heart failure in adult patients with stable, symptomatic chronic heart failure with reduced left ventricular ejection fraction. (1.1).</IndicationAndUsage>
    <Description>Ivabradine tablet contains ivabradine as the active pharmaceutical ingredient. Ivabradine is a hyperpolarization-activated cyclic nucleotide-gated channel blocker that reduces the spontaneous pacemaker activity of the cardiac sinus node by selectively inhibiting the If current, resulting in heart rate reduction with no effect on ventricular· repolarization and no effects on myocardial contractility. The chemical name for ivabradine hydrochloride is 3-(3-{[((7S)-3,4-Dimethoxybicyclo[4.2.0]octa-1,3,5-trien-7-yl)methyl] methyl amino} propyl)-1,3,4,5-tetrahydro-7,8-dimethoxy-2H-3-benzazepin-2-one, hydrochloride. The molecular formula is C27H36N2O5, HCl and the molecular weight (free base + HCl) is 505.05 (468.59 + 36.46). The chemical structure of ivabradine is shown in Figure 1. Figure 1. Chemical Structure of Ivabradine. Ivabradine tablets are supplied in 5 mg and 7.5 mg tablets for oral administration. The tablets contain 5 mg and 7.5 mg of ivabradine, as the active ingredient, equivalent to 5.39 mg and 8.085 mg of ivabradine hydrochloride, respectively. Each film-coated tablet contains following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, D&amp;C yellow #10 aluminum lake, D&amp;C red #27/phloxine aluminum lake, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1514-6</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (70710-1514-6)  / .5 mL in 1 SYRINGE (70710-1514-2) </PackageDescription>
    <NDC11Code>70710-1514-06</NDC11Code>
    <ProductNDC>70710-1514</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208615</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1515-6</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (70710-1515-6)  / .4 mL in 1 SYRINGE (70710-1515-2) </PackageDescription>
    <NDC11Code>70710-1515-06</NDC11Code>
    <ProductNDC>70710-1515</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208615</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1516-6</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (70710-1516-6)  / .6 mL in 1 SYRINGE (70710-1516-2) </PackageDescription>
    <NDC11Code>70710-1516-06</NDC11Code>
    <ProductNDC>70710-1516</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208615</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/.6mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1516-9</NDCCode>
    <PackageDescription>2 SYRINGE in 1 CARTON (70710-1516-9)  / .6 mL in 1 SYRINGE (70710-1516-2) </PackageDescription>
    <NDC11Code>70710-1516-09</NDC11Code>
    <ProductNDC>70710-1516</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208615</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/.6mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1517-6</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (70710-1517-6)  / .8 mL in 1 SYRINGE (70710-1517-2) </PackageDescription>
    <NDC11Code>70710-1517-06</NDC11Code>
    <ProductNDC>70710-1517</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208615</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Fondaparinux Sodium Injection USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below. Fondaparinux sodium is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium in 0.5 mL, 5.0 mg of fondaparinux sodium in 0.4 mL, 7.5 mg of fondaparinux sodium in 0.6 mL, or 10.0 mg of fondaparinux sodium in 0.8 mL of an isotonic solution of sodium chloride and water for injection. May also contain sodium hydroxide and/or hydrochloric acid as pH adjusters. The final drug product is a clear and colorless to slightly yellow liquid with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1532-6</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70710-1532-6)  / 5 mL in 1 VIAL (70710-1532-1) </PackageDescription>
    <NDC11Code>70710-1532-06</NDC11Code>
    <ProductNDC>70710-1532</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cisatracurium Besylate</ProprietaryName>
    <NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200212</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212171</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200212</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
    <Description>Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Each mL in the single-dose vials contains either 2 mg or 10 mg of cisatracurium (equivalent to 2.68 mg and 13.38 mg of cisatracurium besylate; respectively), and benzenesulfonic acid as pH adjuster in water for injection. The pH of cisatracurium besylate injection, USP is between 3.25 and 3.65.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-1533-6</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70710-1533-6)  &gt; 10 mL in 1 VIAL (70710-1533-1) </PackageDescription>
    <NDC11Code>70710-1533-06</NDC11Code>
    <ProductNDC>70710-1533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cisatracurium Besylate</ProprietaryName>
    <NonProprietaryName>Cisatracurium Besylate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201105</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213527</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>CISATRACURIUM BESYLATE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201105</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cisatracurium besylate injection is indicated: 1 as an adjunct to general anesthesia to facilitate tracheal intubation in adults and in pediatric patients 1 month to 12 years of age, 2 to provide skeletal muscle relaxation in adults during surgical procedures or during mechanical ventilation in the ICU, 3 to provide skeletal muscle relaxation during surgical procedures via infusion in pediatric patients 2 years and older.</IndicationAndUsage>
    <Description>Cisatracurium besylate injection USP is a nondepolarizing skeletal neuromuscular blocker for intravenous administration. Compared to other neuromuscular blockers, it is intermediate in its onset and duration of action. Cisatracurium besylate USP is one of 10 isomers of atracurium besylate and constitutes approximately 15% of that mixture. Cisatracurium besylate USP is [1R-[1α,2α(1'R*,2'R*)]]-2,2'-[1,5-pentanediylbis[oxy(3-oxo-3,1-propanediyl)]]bis[1-[(3,4-dimethoxyphenyl)methyl]-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methylisoquinolinium] dibenzenesulfonate. The molecular formula of the cisatracurium parent bis-cation is C53H72N2O12 and the molecular weight is 929.2. The molecular formula of cisatracurium as the besylate salt is C65H82N2O18S2 and the molecular weight is 1243.49. The structural formula of cisatracurium besylate USP is. The log of the partition coefficient of cisatracurium besylate is -2.12 in a 1-octanol/distilled water system at 25°C. Cisatracurium besylate injection USP is a sterile, non-pyrogenic aqueous solution provided in 10 mL vial. The pH is adjusted to 3.25 to 3.65 with benzenesulfonic acid. : 1 The 10 mL multiple-dose vials contain 2 mg/mL cisatracurium, equivalent to 2.68 mg/mL cisatracurium besylate, and 0.9% benzyl alcohol as a preservative.</Description>
  </NDC>
</NDCList>