{
"NDC": [
{
"NDCCode": "70710-1683-0",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70710-1683-0) ",
"NDC11Code": "70710-1683-00",
"ProductNDC": "70710-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216441",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220606",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.",
"Description": "The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "50090-1683-0",
"PackageDescription": "3 POUCH in 1 CARTON (50090-1683-0) / 1 d in 1 POUCH",
"NDC11Code": "50090-1683-00",
"ProductNDC": "50090-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xulane",
"NonProprietaryName": "Norelgestromin And Ethinyl Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20140416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200910",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "NORELGESTROMIN; ETHINYL ESTRADIOL",
"StrengthNumber": "150; 35",
"StrengthUnit": "ug/d; ug/d",
"Pharm_Classes": "Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150206",
"SamplePackage": "N",
"IndicationAndUsage": "Xulane is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Xulane may be less effective in preventing pregnancy in women who weigh 198 lbs. (90 kg) or more. Xulane is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].",
"Description": "Xulane is a transdermal system with a contact surface area of 14 cm². It contains 4.86 mg norelgestromin, USP (NGMN) and 0.53 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN and 35 mcg of EE per day. Systemic exposures (as measured by area under the curve [AUC] and steady state concentration [Css]) of NGMN and EE during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing NGM 250 mcg / EE 35 mcg. [See Boxed Warning and Clinical Pharmacology (12.3).]. Xulane is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a peach flexible film consisting of a pigmented polyethylene outer layer and a polyester inner layer. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains polyisobutene adhesive, crospovidone, mineral oil, non-woven polyester fabric, oleyl alcohol and dipropylene glycol as inactive components. The active components in this layer are the hormones, NGMN and EE. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyester film with a fluoropolymer coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with “Xulane® (norelgestromin and ethinyl estradiol) 150/35 mcg per day” in brown ink. Xulane transdermal systems are packaged with additional pieces of protective film above and below the system within each pouch. These pieces of protective film are removed and discarded at the time of use. The structural formulas of the components are. Molecular weight, NGMN: 327.47. Molecular weight, EE: 296.41. Chemical name for NGMN: 18, 19-dinorpregn-4-en-20-yn-3-one, 13-ethyl-, 17-hydroxy, 3-oxime, (17α)-. Chemical name for EE: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17β-diol, (17α)-."
},
{
"NDCCode": "51927-1683-0",
"PackageDescription": "1 kg in 1 CONTAINER (51927-1683-0)",
"NDC11Code": "51927-1683-00",
"ProductNDC": "51927-1683",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Clindamycin Phosphate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130625",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Professional Compounding Centers of America dba PCCA",
"SubstanceName": "CLINDAMYCIN PHOSPHATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "70518-1683-0",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (70518-1683-0) ",
"NDC11Code": "70518-1683-00",
"ProductNDC": "70518-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorthalidone",
"NonProprietaryName": "Chlorthalidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086831",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "CHLORTHALIDONE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thiazide-like Diuretic [EPC],Increased Diuresis [PE]",
"Status": "Deprecated",
"LastUpdate": "2020-05-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20181121",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1683-1",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (70710-1683-1) ",
"NDC11Code": "70710-1683-01",
"ProductNDC": "70710-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216441",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220606",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.",
"Description": "The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70710-1683-3",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70710-1683-3) ",
"NDC11Code": "70710-1683-03",
"ProductNDC": "70710-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216441",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220606",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.",
"Description": "The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70710-1683-4",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (70710-1683-4) / 10 TABLET, FILM COATED in 1 BLISTER PACK (70710-1683-2) ",
"NDC11Code": "70710-1683-04",
"ProductNDC": "70710-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216441",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220606",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.",
"Description": "The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70710-1683-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70710-1683-5) ",
"NDC11Code": "70710-1683-05",
"ProductNDC": "70710-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220606",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216441",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220606",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.",
"Description": "The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "22840-1683-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-1683-1) ",
"NDC11Code": "22840-1683-01",
"ProductNDC": "22840-1683",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Gliocladium Viride",
"NonProprietaryName": "Gliocladium Viride",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "GLIOCLADIUM VIRIDE",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).",
"Description": "Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen."
},
{
"NDCCode": "67046-1683-3",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-1683-3) ",
"NDC11Code": "67046-1683-03",
"ProductNDC": "67046-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Divalproex Sodium",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078853",
"LabelerName": "Coupler LLC",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260706",
"SamplePackage": "N",
"IndicationAndUsage": "Divalproex sodium delayed-release tablets are an anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder (1.1), 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures (1.2), 3 Prophylaxis of migraine headaches (1.3).",
"Description": "Divalproex Sodium, USP is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship and formed during the partial neutralization of valproic acid with 0.5 equivalent of sodium hydroxide. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex Sodium, USP has the following structure. Divalproex Sodium, USP occurs as a white powder with a characteristic odor. Divalproex sodium delayed-release tablets, USP are for oral administration. Divalproex sodium delayed-release tablets, USP are supplied in three dosage strengths containing divalproex sodium, USP equivalent to 125 mg, 250 mg, or 500 mg of valproic acid. Inactive Ingredients: hypromellose, methacrylic acid co-polymer, microcrystalline cellulose, polyethylene glycol 6000, povidone, pregelatinized starch (contains corn starch), silicon dioxide, simethicone emulsion, sodium hydroxide, talc, and triethyl citrate. In addition, individual tablets contain. 250 mg tablets: Ferric oxide. 500 mg tablets: FD&C Blue No. 1. The components of imprinting ink are ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol, and shellac glaze."
},
{
"NDCCode": "72162-1683-1",
"PackageDescription": "100 TABLET in 1 BOTTLE (72162-1683-1) ",
"NDC11Code": "72162-1683-01",
"ProductNDC": "72162-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071173",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "HALOPERIDOL",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240111",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.",
"Description": "Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2 375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake."
},
{
"NDCCode": "80830-1683-3",
"PackageDescription": "5 TRAY in 1 CARTON (80830-1683-3) / 5 VIAL, GLASS in 1 TRAY (80830-1683-2) / 1 mL in 1 VIAL, GLASS",
"NDC11Code": "80830-1683-03",
"ProductNDC": "80830-1683",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phytonadione",
"NonProprietaryName": "Phytonadione",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20260601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217734",
"LabelerName": "Amneal Pharmaceuticals Private Limited",
"SubstanceName": "PHYTONADIONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Phytonadione injectable emulsion is a vitamin K replacement indicated for the treatment of the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by vitamin K deficiency or interference with vitamin K activity. : 1 Anticoagulant-induced hypoprothrombinemia deficiency caused by coumarin or indanedione derivatives. (1.1), 2 Hypoprothrombinemia due to antibacterial therapy. (1.1), 3 Hypoprothrombinemia secondary to factors limiting absorption or synthesis of vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis. (1.1), 4 Other drug-induced hypoprothrombinemia where it is definitely shown that the result is due to interference with vitamin K metabolism, e.g., salicylates. (1.1).",
"Description": "Phytonadione, USP is a vitamin K replacement, which is a clear, yellow to amber, very viscous liquid. It is soluble in dehydrated alcohol, in benzene, in chloroform, in ether and in vegetable oils; slightly soluble in alcohol and insoluble in water. It has a molecular weight of 450.70 g/mol. Phytonadione is 2-Methyl-3-(3,7,11,15-tetramethylhexadec-2-en-1-yl)naphthalene-1,4-dione. It’s molecular formula is C31H46O2 and its molecular structure is. Phytonadione injectable emulsion, USP is a clear, yellow color, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Phytonadione injectable emulsion, USP is available in 10 mg (10 mg/mL) single-dose vial. Each milliliter contains phytonadione USP, 10 mg; polyoxyethylated fatty acid derivative 70 mg; citric acid monohydrate 1 mg; disodium hydrogen phosphate dihydrate 3 mg and dextrose, hydrous 37.5 mg in water for injection. May contain hydrochloric acid for pH adjustment. pH is 6.3 (5.0 to 7.0). Phytonadione is oxygen sensitive."
},
{
"NDCCode": "70710-1104-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1104-0) ",
"NDC11Code": "70710-1104-00",
"ProductNDC": "70710-1104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine",
"NonProprietaryName": "Tizanidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208187",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180913",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1105-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1105-0) ",
"NDC11Code": "70710-1105-00",
"ProductNDC": "70710-1105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine",
"NonProprietaryName": "Tizanidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208187",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180913",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1110-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1110-0) ",
"NDC11Code": "70710-1110-00",
"ProductNDC": "70710-1110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyproheptadine Hydrochloride",
"NonProprietaryName": "Cyproheptadine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208938",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "CYPROHEPTADINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2022-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170720",
"SamplePackage": "N",
"IndicationAndUsage": "Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Cold urticaria. Dermatographism. As therapy for anaphylactic reactions adjunctive to epinephrine and other standard measures after the cute manifestations have been controlled.",
"Description": "Cyproheptadine hydrochloride, USP is an antihistaminic and antiserotonergic agent. Cyproheptadine hydrochloride, USP is a white to slightly yellow, odorless or practically odorless, crystalline powder, with a molecular weight of 350.89, which is slightly soluble in water, freely soluble in methanol, soluble in chloroform, sparingly soluble in alcohol, practically insoluble in ether. It is the sesquihydrate of 4-(5H-dibenzo [a, d] cyclohepten-5-ylidene)-1-methylpiperidine hydrochloride. The molecular formula of the anhydrous salt is C21H21NHCl and the structural formula of the anhydrous salt is. Molecular Formula: C21H21N HCl. Molecular Weight: 350.89. Cyproheptadine hydrochloride, USP is available for oral administration in 4 mg tablets. Inactive ingredients include: lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate (botanical source: potato)."
},
{
"NDCCode": "70710-1148-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1148-0) ",
"NDC11Code": "70710-1148-00",
"ProductNDC": "70710-1148",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate",
"NonProprietaryName": "Isosorbide Dinitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213057",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "ISOSORBIDE DINITRATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake."
},
{
"NDCCode": "70710-1149-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1149-0) ",
"NDC11Code": "70710-1149-00",
"ProductNDC": "70710-1149",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate",
"NonProprietaryName": "Isosorbide Dinitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213057",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "ISOSORBIDE DINITRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake."
},
{
"NDCCode": "70710-1150-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1150-0) ",
"NDC11Code": "70710-1150-00",
"ProductNDC": "70710-1150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate",
"NonProprietaryName": "Isosorbide Dinitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213057",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "ISOSORBIDE DINITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake."
},
{
"NDCCode": "70710-1151-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1151-0) ",
"NDC11Code": "70710-1151-00",
"ProductNDC": "70710-1151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate",
"NonProprietaryName": "Isosorbide Dinitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213057",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "ISOSORBIDE DINITRATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191125",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake."
},
{
"NDCCode": "70710-1161-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1161-0) ",
"NDC11Code": "70710-1161-00",
"ProductNDC": "70710-1161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201029",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213957",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Active",
"LastUpdate": "2024-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201029",
"SamplePackage": "N",
"IndicationAndUsage": "Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.",
"Description": "Meclizine hydrochloride, a histamine (H1) receptor antagonist, is a white to slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride, USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Inactive ingredients for the tablets are: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, silicon dioxide and sodium starch glycolate. In addition, the 12.5 mg tablet contains FD&C Blue # 1 Aluminum Lake; and the 25 mg tablet contains D&C Yellow # 10 Aluminum Lake and FD&C Yellow # 6 Aluminum Lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base."
},
{
"NDCCode": "70710-1162-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1162-0) ",
"NDC11Code": "70710-1162-00",
"ProductNDC": "70710-1162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201029",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213957",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Active",
"LastUpdate": "2024-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201029",
"SamplePackage": "N",
"IndicationAndUsage": "Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.",
"Description": "Meclizine hydrochloride, a histamine (H1) receptor antagonist, is a white to slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride, USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Inactive ingredients for the tablets are: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, silicon dioxide and sodium starch glycolate. In addition, the 12.5 mg tablet contains FD&C Blue # 1 Aluminum Lake; and the 25 mg tablet contains D&C Yellow # 10 Aluminum Lake and FD&C Yellow # 6 Aluminum Lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base."
},
{
"NDCCode": "70710-1209-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1209-0) ",
"NDC11Code": "70710-1209-00",
"ProductNDC": "70710-1209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210117",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180208",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol tablet is indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).",
"Description": "Allopurinol is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol is known chemically as 1,5-dihydro-4H-pyrazolo [3,4-d] pyrimidin-4-oneand it has a molecular weight of 136.11 g/mol. Its solubility in water at 37°C is 80.0 mg/dL and is greater in an alkaline solution. It is a xanthine oxidase inhibitor which is administered orally. Each tablet for oral administration contains either 100 mg, 200 mg or 300 mg of allopurinol, USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, pregelatinized starch, povidone and FD& C Yellow No. 6 aluminum Lake (only for 300 mg)."
},
{
"NDCCode": "70710-1210-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1210-0) ",
"NDC11Code": "70710-1210-00",
"ProductNDC": "70710-1210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210117",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180208",
"SamplePackage": "N",
"IndicationAndUsage": "Allopurinol tablet is indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).",
"Description": "Allopurinol is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol is known chemically as 1,5-dihydro-4H-pyrazolo [3,4-d] pyrimidin-4-oneand it has a molecular weight of 136.11 g/mol. Its solubility in water at 37°C is 80.0 mg/dL and is greater in an alkaline solution. It is a xanthine oxidase inhibitor which is administered orally. Each tablet for oral administration contains either 100 mg, 200 mg or 300 mg of allopurinol, USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, pregelatinized starch, povidone and FD& C Yellow No. 6 aluminum Lake (only for 300 mg)."
},
{
"NDCCode": "70710-1225-0",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70710-1225-0) ",
"NDC11Code": "70710-1225-00",
"ProductNDC": "70710-1225",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210086",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171226",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow."
},
{
"NDCCode": "70710-1226-0",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70710-1226-0) ",
"NDC11Code": "70710-1226-00",
"ProductNDC": "70710-1226",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210086",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171226",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow."
},
{
"NDCCode": "70710-1227-0",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70710-1227-0) ",
"NDC11Code": "70710-1227-00",
"ProductNDC": "70710-1227",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210086",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171226",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow."
},
{
"NDCCode": "70710-1228-0",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70710-1228-0) ",
"NDC11Code": "70710-1228-00",
"ProductNDC": "70710-1228",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210086",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171226",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow."
},
{
"NDCCode": "70710-1229-0",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70710-1229-0) ",
"NDC11Code": "70710-1229-00",
"ProductNDC": "70710-1229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210086",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171226",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow."
},
{
"NDCCode": "70710-1230-0",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70710-1230-0) ",
"NDC11Code": "70710-1230-00",
"ProductNDC": "70710-1230",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210086",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171226",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow."
},
{
"NDCCode": "70710-1285-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (70710-1285-0) ",
"NDC11Code": "70710-1285-00",
"ProductNDC": "70710-1285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211659",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181206",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, povidone and sodium starch glycolate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70710-1683-0</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70710-1683-0) </PackageDescription>
<NDC11Code>70710-1683-00</NDC11Code>
<ProductNDC>70710-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216441</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>50090-1683-0</NDCCode>
<PackageDescription>3 POUCH in 1 CARTON (50090-1683-0) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>50090-1683-00</NDC11Code>
<ProductNDC>50090-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xulane</ProprietaryName>
<NonProprietaryName>Norelgestromin And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20140416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200910</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>NORELGESTROMIN; ETHINYL ESTRADIOL</SubstanceName>
<StrengthNumber>150; 35</StrengthNumber>
<StrengthUnit>ug/d; ug/d</StrengthUnit>
<Pharm_Classes>Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Xulane is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Xulane may be less effective in preventing pregnancy in women who weigh 198 lbs. (90 kg) or more. Xulane is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Xulane is a transdermal system with a contact surface area of 14 cm². It contains 4.86 mg norelgestromin, USP (NGMN) and 0.53 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN and 35 mcg of EE per day. Systemic exposures (as measured by area under the curve [AUC] and steady state concentration [Css]) of NGMN and EE during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing NGM 250 mcg / EE 35 mcg. [See Boxed Warning and Clinical Pharmacology (12.3).]. Xulane is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a peach flexible film consisting of a pigmented polyethylene outer layer and a polyester inner layer. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains polyisobutene adhesive, crospovidone, mineral oil, non-woven polyester fabric, oleyl alcohol and dipropylene glycol as inactive components. The active components in this layer are the hormones, NGMN and EE. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyester film with a fluoropolymer coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with “Xulane® (norelgestromin and ethinyl estradiol) 150/35 mcg per day” in brown ink. Xulane transdermal systems are packaged with additional pieces of protective film above and below the system within each pouch. These pieces of protective film are removed and discarded at the time of use. The structural formulas of the components are. Molecular weight, NGMN: 327.47. Molecular weight, EE: 296.41. Chemical name for NGMN: 18, 19-dinorpregn-4-en-20-yn-3-one, 13-ethyl-, 17-hydroxy, 3-oxime, (17α)-. Chemical name for EE: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17β-diol, (17α)-.</Description>
</NDC>
<NDC>
<NDCCode>51927-1683-0</NDCCode>
<PackageDescription>1 kg in 1 CONTAINER (51927-1683-0)</PackageDescription>
<NDC11Code>51927-1683-00</NDC11Code>
<ProductNDC>51927-1683</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Clindamycin Phosphate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130625</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Professional Compounding Centers of America dba PCCA</LabelerName>
<SubstanceName>CLINDAMYCIN PHOSPHATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>70518-1683-0</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (70518-1683-0) </PackageDescription>
<NDC11Code>70518-1683-00</NDC11Code>
<ProductNDC>70518-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorthalidone</ProprietaryName>
<NonProprietaryName>Chlorthalidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086831</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>CHLORTHALIDONE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thiazide-like Diuretic [EPC],Increased Diuresis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-05-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1683-1</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (70710-1683-1) </PackageDescription>
<NDC11Code>70710-1683-01</NDC11Code>
<ProductNDC>70710-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216441</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70710-1683-3</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70710-1683-3) </PackageDescription>
<NDC11Code>70710-1683-03</NDC11Code>
<ProductNDC>70710-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216441</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70710-1683-4</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (70710-1683-4) / 10 TABLET, FILM COATED in 1 BLISTER PACK (70710-1683-2) </PackageDescription>
<NDC11Code>70710-1683-04</NDC11Code>
<ProductNDC>70710-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216441</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70710-1683-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70710-1683-5) </PackageDescription>
<NDC11Code>70710-1683-05</NDC11Code>
<ProductNDC>70710-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220606</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216441</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220606</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: 1 active duodenal ulcer (DU)., 2 active gastric ulcer (GU)., 3 symptomatic nonerosive gastroesophageal reflux disease (GERD)., 4 erosive esophagitis due to GERD, diagnosed by biopsy.</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.45. Its structural formula is. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (source: maize), sodium starch glycolate, talc and titanium dioxide. Famotidine, USP is a white to pale yellowish-white crystalline powder that is freely soluble in dimethyl formamide and glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, practically insoluble in acetone, in alcohol, in chloroform, in ether and ethyl acetate. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>22840-1683-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-1683-1) </PackageDescription>
<NDC11Code>22840-1683-01</NDC11Code>
<ProductNDC>22840-1683</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Gliocladium Viride</ProprietaryName>
<NonProprietaryName>Gliocladium Viride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>GLIOCLADIUM VIRIDE</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Fungal Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic Extracts are indicated for the diagnosis and treatment of patients with immediate hypersensitivity allergy to the respective allergens, inhaled, ingested or otherwise introduced into contact with sensitive tissues. The diagnosis of IgE‑mediated allergy may be established by the allergy history, clinical evaluation, and skin test reactivity. (4,7,11) Immunotherapy with Allergenic Extracts is indicated when testing and patient history have identified the offending allergens and when it is not possible or practical to avoid these allergens. (12‑14) Food extracts have not been proven effective in immunotherapy. The use of Allergenic Extracts for the above purposes should be made only by physicians with special familiarity and knowledge of allergy. (See DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Allergenic Extracts are supplied as a sterile solution for intracutaneous or subcutaneous administration. Concentrates contain the soluble extractants of the source material with 0.5% sodium chloride and 0.54% sodium bicarbonate at a pH of 6.8 to 8.4 as aqueous extracts in water for injection or in 50% glycerin. Aqueous extracts contain 0.4% phenol as a preservative and 50% glycerinated extracts contain 0.2% phenol. Diluted aqueous extracts contain Buffered Saline with 0.5% sodium chloride, 0.04% potassium phosphate, 0.11% sodium phosphate heptahydrate, and 0.4% phenol in water for injection. Source materials for these extracts are as follows: Pollens are collected from the respective grasses, weeds, trees, shrubs, cultured plants and flowers. Mold extracts are produced from pure culture mycelial mats. Rusts and smuts are obtained from natural growths. Epidermal extracts are produced from the hide, hair, or feathers containing the natural dander, or from separated dander. Insects are the whole body insects. House dust is made from various dusts ordinarily found in the home with the extract dialyzed to remove low‑molecular weight irritants and concentrated to an extraction ratio of 1:1. Food extracts are prepared from the edible portions of the respective foods, obtained fresh if possible. Certain diagnostic food extracts contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Other miscellaneous inhalants involved in respiratory allergy are obtained in the naturally occurring form to which a patient may be exposed. Extracts are labeled either by weight‑to‑volume (w/v) based on the weight of the source material to the volume of the extracting fluid, or in protein nitrogen units (PNU) based on assay with one PNU representing 0.00001 mg of protein nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>67046-1683-3</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BLISTER PACK (67046-1683-3) </PackageDescription>
<NDC11Code>67046-1683-03</NDC11Code>
<ProductNDC>67046-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Divalproex Sodium</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078853</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Divalproex sodium delayed-release tablets are an anti-epileptic drug indicated for: 1 Treatment of manic episodes associated with bipolar disorder (1.1), 2 Monotherapy and adjunctive therapy of complex partial seizures and simple and complex absence seizures; adjunctive therapy in patients with multiple seizure types that include absence seizures (1.2), 3 Prophylaxis of migraine headaches (1.3).</IndicationAndUsage>
<Description>Divalproex Sodium, USP is a stable co-ordination compound comprised of sodium valproate and valproic acid in a 1:1 molar relationship and formed during the partial neutralization of valproic acid with 0.5 equivalent of sodium hydroxide. Chemically it is designated as sodium hydrogen bis(2-propylpentanoate). Divalproex Sodium, USP has the following structure. Divalproex Sodium, USP occurs as a white powder with a characteristic odor. Divalproex sodium delayed-release tablets, USP are for oral administration. Divalproex sodium delayed-release tablets, USP are supplied in three dosage strengths containing divalproex sodium, USP equivalent to 125 mg, 250 mg, or 500 mg of valproic acid. Inactive Ingredients: hypromellose, methacrylic acid co-polymer, microcrystalline cellulose, polyethylene glycol 6000, povidone, pregelatinized starch (contains corn starch), silicon dioxide, simethicone emulsion, sodium hydroxide, talc, and triethyl citrate. In addition, individual tablets contain. 250 mg tablets: Ferric oxide. 500 mg tablets: FD&C Blue No. 1. The components of imprinting ink are ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol, and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>72162-1683-1</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (72162-1683-1) </PackageDescription>
<NDC11Code>72162-1683-01</NDC11Code>
<ProductNDC>72162-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071173</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>HALOPERIDOL</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
<Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. C21H23ClFNO2 375.87. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&C Red No. 40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>80830-1683-3</NDCCode>
<PackageDescription>5 TRAY in 1 CARTON (80830-1683-3) / 5 VIAL, GLASS in 1 TRAY (80830-1683-2) / 1 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>80830-1683-03</NDC11Code>
<ProductNDC>80830-1683</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phytonadione</ProprietaryName>
<NonProprietaryName>Phytonadione</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217734</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals Private Limited</LabelerName>
<SubstanceName>PHYTONADIONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Prothrombin Activity [PE], Reversed Anticoagulation Activity [PE], Vitamin K [CS], Vitamin K [EPC], Warfarin Reversal Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phytonadione injectable emulsion is a vitamin K replacement indicated for the treatment of the following coagulation disorders which are due to faulty formation of factors II, VII, IX and X when caused by vitamin K deficiency or interference with vitamin K activity. : 1 Anticoagulant-induced hypoprothrombinemia deficiency caused by coumarin or indanedione derivatives. (1.1), 2 Hypoprothrombinemia due to antibacterial therapy. (1.1), 3 Hypoprothrombinemia secondary to factors limiting absorption or synthesis of vitamin K, e.g., obstructive jaundice, biliary fistula, sprue, ulcerative colitis, celiac disease, intestinal resection, cystic fibrosis of the pancreas, and regional enteritis. (1.1), 4 Other drug-induced hypoprothrombinemia where it is definitely shown that the result is due to interference with vitamin K metabolism, e.g., salicylates. (1.1).</IndicationAndUsage>
<Description>Phytonadione, USP is a vitamin K replacement, which is a clear, yellow to amber, very viscous liquid. It is soluble in dehydrated alcohol, in benzene, in chloroform, in ether and in vegetable oils; slightly soluble in alcohol and insoluble in water. It has a molecular weight of 450.70 g/mol. Phytonadione is 2-Methyl-3-(3,7,11,15-tetramethylhexadec-2-en-1-yl)naphthalene-1,4-dione. It’s molecular formula is C31H46O2 and its molecular structure is. Phytonadione injectable emulsion, USP is a clear, yellow color, sterile, nonpyrogenic aqueous dispersion available for injection by the intravenous, intramuscular and subcutaneous routes. Phytonadione injectable emulsion, USP is available in 10 mg (10 mg/mL) single-dose vial. Each milliliter contains phytonadione USP, 10 mg; polyoxyethylated fatty acid derivative 70 mg; citric acid monohydrate 1 mg; disodium hydrogen phosphate dihydrate 3 mg and dextrose, hydrous 37.5 mg in water for injection. May contain hydrochloric acid for pH adjustment. pH is 6.3 (5.0 to 7.0). Phytonadione is oxygen sensitive.</Description>
</NDC>
<NDC>
<NDCCode>70710-1104-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1104-0) </PackageDescription>
<NDC11Code>70710-1104-00</NDC11Code>
<ProductNDC>70710-1104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine</ProprietaryName>
<NonProprietaryName>Tizanidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208187</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1105-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1105-0) </PackageDescription>
<NDC11Code>70710-1105-00</NDC11Code>
<ProductNDC>70710-1105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine</ProprietaryName>
<NonProprietaryName>Tizanidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208187</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1110-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1110-0) </PackageDescription>
<NDC11Code>70710-1110-00</NDC11Code>
<ProductNDC>70710-1110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyproheptadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyproheptadine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208938</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CYPROHEPTADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Cold urticaria. Dermatographism. As therapy for anaphylactic reactions adjunctive to epinephrine and other standard measures after the cute manifestations have been controlled.</IndicationAndUsage>
<Description>Cyproheptadine hydrochloride, USP is an antihistaminic and antiserotonergic agent. Cyproheptadine hydrochloride, USP is a white to slightly yellow, odorless or practically odorless, crystalline powder, with a molecular weight of 350.89, which is slightly soluble in water, freely soluble in methanol, soluble in chloroform, sparingly soluble in alcohol, practically insoluble in ether. It is the sesquihydrate of 4-(5H-dibenzo [a, d] cyclohepten-5-ylidene)-1-methylpiperidine hydrochloride. The molecular formula of the anhydrous salt is C21H21NHCl and the structural formula of the anhydrous salt is. Molecular Formula: C21H21N HCl. Molecular Weight: 350.89. Cyproheptadine hydrochloride, USP is available for oral administration in 4 mg tablets. Inactive ingredients include: lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate (botanical source: potato).</Description>
</NDC>
<NDC>
<NDCCode>70710-1148-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1148-0) </PackageDescription>
<NDC11Code>70710-1148-00</NDC11Code>
<ProductNDC>70710-1148</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213057</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1149-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1149-0) </PackageDescription>
<NDC11Code>70710-1149-00</NDC11Code>
<ProductNDC>70710-1149</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213057</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1150-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1150-0) </PackageDescription>
<NDC11Code>70710-1150-00</NDC11Code>
<ProductNDC>70710-1150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213057</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1151-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1151-0) </PackageDescription>
<NDC11Code>70710-1151-00</NDC11Code>
<ProductNDC>70710-1151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213057</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 236.14. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline compound, has a melting point of 70°C and has an optical rotation of +140° (c=1, alcohol, 20°C). Isosorbide dinitrate is very slightly soluble in water; very soluble in acetone and sparingly soluble in alcohol. Each isosorbide dinitrate tablet, USP contains 5 mg, 10 mg, 20 mg, 30 mg or 40 mg of isosorbide dinitrate. The inactive ingredients in each tablet are lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 5 mg dosage strength also contains FD&C red no. 40 aluminium lake. The 20 mg and 40 mg dosage strengths also contain FD&C blue no. 1 aluminium lake and D&C yellow no. 10 aluminium lake. The 30 mg dosage strength also contains FD&C blue no. 1 aluminium lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1161-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1161-0) </PackageDescription>
<NDC11Code>70710-1161-00</NDC11Code>
<ProductNDC>70710-1161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201029</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213957</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.</IndicationAndUsage>
<Description>Meclizine hydrochloride, a histamine (H1) receptor antagonist, is a white to slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride, USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Inactive ingredients for the tablets are: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, silicon dioxide and sodium starch glycolate. In addition, the 12.5 mg tablet contains FD&C Blue # 1 Aluminum Lake; and the 25 mg tablet contains D&C Yellow # 10 Aluminum Lake and FD&C Yellow # 6 Aluminum Lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base.</Description>
</NDC>
<NDC>
<NDCCode>70710-1162-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1162-0) </PackageDescription>
<NDC11Code>70710-1162-00</NDC11Code>
<ProductNDC>70710-1162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201029</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213957</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Meclizine hydrochloride tablets are indicated for the treatment of vertigo associated with diseases affecting the vestibular system in adults.</IndicationAndUsage>
<Description>Meclizine hydrochloride, a histamine (H1) receptor antagonist, is a white to slightly yellowish, crystalline powder. It has the following structural formula. Chemically, meclizine hydrochloride, USP is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. Inactive ingredients for the tablets are: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, silicon dioxide and sodium starch glycolate. In addition, the 12.5 mg tablet contains FD&C Blue # 1 Aluminum Lake; and the 25 mg tablet contains D&C Yellow # 10 Aluminum Lake and FD&C Yellow # 6 Aluminum Lake. Each meclizine hydrochloride 12.5 mg tablet contains 12.5 mg of meclizine dihydrochloride equivalent to 10.53 mg of meclizine free base. Each meclizine hydrochloride 25 mg tablet contains 25 mg of meclizine dihydrochloride equivalent to 21.07 mg of meclizine free base.</Description>
</NDC>
<NDC>
<NDCCode>70710-1209-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1209-0) </PackageDescription>
<NDC11Code>70710-1209-00</NDC11Code>
<ProductNDC>70710-1209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210117</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol tablet is indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).</IndicationAndUsage>
<Description>Allopurinol is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol is known chemically as 1,5-dihydro-4H-pyrazolo [3,4-d] pyrimidin-4-oneand it has a molecular weight of 136.11 g/mol. Its solubility in water at 37°C is 80.0 mg/dL and is greater in an alkaline solution. It is a xanthine oxidase inhibitor which is administered orally. Each tablet for oral administration contains either 100 mg, 200 mg or 300 mg of allopurinol, USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, pregelatinized starch, povidone and FD& C Yellow No. 6 aluminum Lake (only for 300 mg).</Description>
</NDC>
<NDC>
<NDCCode>70710-1210-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1210-0) </PackageDescription>
<NDC11Code>70710-1210-00</NDC11Code>
<ProductNDC>70710-1210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210117</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allopurinol tablet is indicated for: 1 The management of adults with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy), 2 The management of adult and pediatric patients with leukemia, lymphoma and solid tumor malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels, 3 The management of adult patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients, despite lifestyle changes (such as reduction of dietary sodium, non-dairy animal protein, oxylate rich foods, refined sugars and increases in oral fluids and fruits and vegetables).</IndicationAndUsage>
<Description>Allopurinol is a xanthine oxidase inhibitor. It has the following structural formula. Allopurinol is known chemically as 1,5-dihydro-4H-pyrazolo [3,4-d] pyrimidin-4-oneand it has a molecular weight of 136.11 g/mol. Its solubility in water at 37°C is 80.0 mg/dL and is greater in an alkaline solution. It is a xanthine oxidase inhibitor which is administered orally. Each tablet for oral administration contains either 100 mg, 200 mg or 300 mg of allopurinol, USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, lactose monohydrate, magnesium stearate, pregelatinized starch, povidone and FD& C Yellow No. 6 aluminum Lake (only for 300 mg).</Description>
</NDC>
<NDC>
<NDCCode>70710-1225-0</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70710-1225-0) </PackageDescription>
<NDC11Code>70710-1225-00</NDC11Code>
<ProductNDC>70710-1225</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210086</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1226-0</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70710-1226-0) </PackageDescription>
<NDC11Code>70710-1226-00</NDC11Code>
<ProductNDC>70710-1226</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210086</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1227-0</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70710-1227-0) </PackageDescription>
<NDC11Code>70710-1227-00</NDC11Code>
<ProductNDC>70710-1227</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210086</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1228-0</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70710-1228-0) </PackageDescription>
<NDC11Code>70710-1228-00</NDC11Code>
<ProductNDC>70710-1228</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210086</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1229-0</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70710-1229-0) </PackageDescription>
<NDC11Code>70710-1229-00</NDC11Code>
<ProductNDC>70710-1229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210086</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1230-0</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70710-1230-0) </PackageDescription>
<NDC11Code>70710-1230-00</NDC11Code>
<ProductNDC>70710-1230</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210086</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1285-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (70710-1285-0) </PackageDescription>
<NDC11Code>70710-1285-00</NDC11Code>
<ProductNDC>70710-1285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211659</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen tablets USP are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets USP may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets USP are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, povidone and sodium starch glycolate.</Description>
</NDC>
</NDCList>