{
"NDC": [
{
"NDCCode": "70710-1804-6",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (70710-1804-6) ",
"NDC11Code": "70710-1804-06",
"ProductNDC": "70710-1804",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zituvimet Xr",
"NonProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20241031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216778",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SITAGLIPTIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "50; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241031",
"SamplePackage": "N",
"IndicationAndUsage": "ZITUVIMET XR is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use. ZITUVIMET XR is not recommended in patients with type 1 diabetes mellitus. ZITUVIMET XR has not been studied in patients with a history of pancreatitis. It is unknown whether patients with a history of pancreatitis are at increased risk for the development of pancreatitis while using ZITUVIMET XR [see Warnings and Precautions (5.2)].",
"Description": "ZITUVIMET XR tablets for oral use contain two antihyperglycemic medications: sitagliptin and metformin hydrochloride. Sitagliptin. Sitagliptin is an orally-active inhibitor of the DPP-4 enzyme. Sitagliptin free base drug substance is used to manufacture ZITUVIMET XR. Sitagliptin free base is described chemically as 7-[(3R)-3-amino-1-oxo-4-(2,4,5-trifluorophenyl)butyl]-5,6,7,8-tetrahydro-3-(trifluoromethyl)-1,2,4-triazolo[4,3-α]pyrazine with an empirical formula of C16H15F6N5O and a molecular weight of 407.31. The structural formula is. Sitagliptin free base is a white to off-white, non-hygroscopic powder. It is soluble in methanol and slightly soluble in water. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown. ZITUVIMET XR. ZITUVIMET XR is available as film-coated tablets containing: 1 50 mg sitagliptin and 389.93 mg of metformin equivalent to 500 mg metformin HCl (ZITUVIMET XR 50/500)., 2 50 mg sitagliptin and 779.86 mg of metformin equivalent to 1,000 mg metformin HCl (ZITUVIMET XR 50/1,000)., 3 100 mg sitagliptin and 779.86 mg of metformin equivalent to 1,000 mg metformin HCl (ZITUVIMET XR 100/1,000)."
},
{
"NDCCode": "0220-1804-41",
"PackageDescription": "6 [hp_C] in 1 TUBE (0220-1804-41) ",
"NDC11Code": "00220-1804-41",
"ProductNDC": "0220-1804",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dulcamara",
"NonProprietaryName": "Solanum Dulcamara Top",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "SOLANUM DULCAMARA TOP",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/6[hp_C]",
"Status": "Active",
"LastUpdate": "2023-02-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19830303",
"SamplePackage": "N",
"IndicationAndUsage": "Joint Pain Triggered By Dampness*."
},
{
"NDCCode": "71335-1804-6",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (71335-1804-6) ",
"NDC11Code": "71335-1804-06",
"ProductNDC": "71335-1804",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204776",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250130",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib is indicated.",
"Description": "Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure:. Celecoxib USP is a white or almost white crystalline powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib USP is hydrophobic (log P is 3.5) and is soluble in ethanol and in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsules include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate. The empty hard gelatin capsule shell contains gelatin and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "72162-1804-1",
"PackageDescription": "5 PACKAGE in 1 CARTON (72162-1804-1) / 6 SUPPOSITORY in 1 PACKAGE",
"NDC11Code": "72162-1804-01",
"ProductNDC": "72162-1804",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20190605",
"EndMarketingDate": "20261031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207448",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2024-11-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190605",
"EndMarketingDatePackage": "20261031",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.",
"Description": "The active ingredient in mesalamine suppositories 1000 mg for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an anti-inflammatory drug. Each mesalamine suppository contains 1000 mg of mesalamine (USP) in a base of Hard Fat, NF. The empirical formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is."
},
{
"NDCCode": "72162-1804-3",
"PackageDescription": "5 PACKAGE in 1 CARTON (72162-1804-3) / 6 SUPPOSITORY in 1 PACKAGE",
"NDC11Code": "72162-1804-03",
"ProductNDC": "72162-1804",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20190605",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207448",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-11-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240206",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.",
"Description": "The active ingredient in mesalamine suppositories 1000 mg for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an anti-inflammatory drug. Each mesalamine suppository contains 1000 mg of mesalamine (USP) in a base of Hard Fat, NF. The empirical formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is."
},
{
"NDCCode": "0026-3942-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3942-25) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) ",
"NDC11Code": "00026-3942-25",
"ProductNDC": "0026-3942",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3942-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3942-99) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) ",
"NDC11Code": "00026-3942-99",
"ProductNDC": "0026-3942",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3944-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3944-25) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) ",
"NDC11Code": "00026-3944-25",
"ProductNDC": "0026-3944",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3944-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3944-99) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) ",
"NDC11Code": "00026-3944-99",
"ProductNDC": "0026-3944",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3946-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3946-25) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) ",
"NDC11Code": "00026-3946-25",
"ProductNDC": "0026-3946",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3946-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3946-99) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) ",
"NDC11Code": "00026-3946-99",
"ProductNDC": "0026-3946",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3948-25",
"PackageDescription": "1 KIT in 1 BOX (0026-3948-25) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) ",
"NDC11Code": "00026-3948-25",
"ProductNDC": "0026-3948",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3948-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3948-99) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) ",
"NDC11Code": "00026-3948-99",
"ProductNDC": "0026-3948",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20180830",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180830",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3950-50",
"PackageDescription": "1 KIT in 1 BOX (0026-3950-50) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) ",
"NDC11Code": "00026-3950-50",
"ProductNDC": "0026-3950",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20241202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241202",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "0026-3950-99",
"PackageDescription": "1 KIT in 1 BOX (0026-3950-99) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) ",
"NDC11Code": "00026-3950-99",
"ProductNDC": "0026-3950",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Jivi",
"NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
"DosageFormName": "KIT",
"StartMarketingDate": "20241202",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125661",
"LabelerName": "Bayer HealthCare LLC",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241202",
"SamplePackage": "N",
"IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
"Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
},
{
"NDCCode": "53002-1804-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-1804-0) ",
"NDC11Code": "53002-1804-00",
"ProductNDC": "53002-1804",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Benazepril Hydrochloride",
"NonProprietaryName": "Amlodipine And Benazepril Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202239",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE",
"StrengthNumber": "10; 40",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Decreased Blood Pressure [PE], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20221101",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine and benazepril hydrochloride capsules are a combination capsule of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin-converting enzyme (ACE) inhibitor. Amlodipine and benazepril hydrochloride capsules are indicated for the treatment of hypertension in patients not adequately controlled on monotherapy with either agent. (1).",
"Description": "Amlodipine and benazepril hydrochloride capsules USP are a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride USP is a white to off-white, crystalline powder, soluble (greater than 100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is:. Its molecular formula is C24H28N2O5HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl ACE inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate USP is a white or almost white powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is:. Its molecular formula is C20H25ClN2O5C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine and benazepril hydrochloride is available as capsules containing amlodipine besylate USP (3.5 mg, 6.9 mg or 13.9 mg, equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine respectively), with 10 mg, 20 mg, or 40 mg of benazepril hydrochloride USP providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg, and 10 mg/40 mg. The inactive ingredients of the capsules are colloidal silicon dioxide, crospovidone, gelatin, magnesium stearate, microcrystalline cellulose, povidone, sodium lauryl sulfate, and titanium dioxide. In addition, the hard gelatin capsule shells of 5 mg/10 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 5 mg/20 mg contains iron oxide red, 5 mg/40 mg and 10 mg/40 mg contains FD&C Blue 1, FD&C Red 3, and 10 mg/20 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, and FD&C Yellow 5. The capsules are printed with edible ink containing black iron oxide and shellac."
},
{
"NDCCode": "57955-1804-2",
"PackageDescription": "59 mL in 1 BOTTLE, SPRAY (57955-1804-2)",
"NDC11Code": "57955-1804-02",
"ProductNDC": "57955-1804",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Arthritis Pain And Joint Relief / Soulagement De La Douleur Arthritique Et Articulaire",
"NonProprietaryName": "Actaea Spicata, Aesculus Hippocastanum, Arnica Montana, Bellis Perennis, Bryonia, Calcarea Carbonica, Calcarea Fluorica, Causticum, Cimicifuga Racemosa, Formicum Acidum, Hypericum Perforatum, Ledum Palustre, Lithium Carbonicum, Magnesia Phosphorica, Phosphorus, Phytolacca Decandra, Pulsatilla, Rhododendron Chrysanthum, Rhus Toxicodendron, Ruta Graveolens, Salicylicum Acidum, Sepia, Zincum Metallicum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20140806",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "King Bio Inc.",
"SubstanceName": "ACTAEA SPICATA ROOT; HORSE CHESTNUT; ARNICA MONTANA; BELLIS PERENNIS; BRYONIA ALBA ROOT; OYSTER SHELL CALCIUM CARBONATE, CRUDE; CALCIUM FLUORIDE; CAUSTICUM; BLACK COHOSH; FORMIC ACID; HYPERICUM PERFORATUM; LEDUM PALUSTRE TWIG; LITHIUM CARBONATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE; PHOSPHORUS; PHYTOLACCA AMERICANA ROOT; PULSATILLA VULGARIS; RHODODENDRON AUREUM LEAF; TOXICODENDRON PUBESCENS LEAF; RUTA GRAVEOLENS FLOWERING TOP; SALICYLIC ACID; SEPIA OFFICINALIS JUICE; ZINC",
"StrengthNumber": "10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10",
"StrengthUnit": "[hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Indications: A homeopathic remedy for the temporary relief of symptoms due to arthritic pain: 1 inflammation, 2 back pain, 3 stiff and swollen joints, 4 leg cramps, 5 rheumatic pain, 6 sore tendons and ligaments, 7 sprains and join injuries, 8 bone injury, 9 contracted fingers, 10 hip and joint pain, 11 knee pain, 12 aching limbs, 13 sciatic pain, 14 restless limbs."
},
{
"NDCCode": "61958-1804-1",
"PackageDescription": "120 PELLET in 1 PACKET (61958-1804-1) ",
"NDC11Code": "61958-1804-01",
"ProductNDC": "61958-1804",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Harvoni",
"NonProprietaryName": "Ledipasvir And Sofosbuvir",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190828",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212477",
"LabelerName": "Gilead Sciences, Inc",
"SubstanceName": "LEDIPASVIR; SOFOSBUVIR",
"StrengthNumber": "45; 200",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Hepatitis C Virus NS5A Inhibitor [EPC], Hepatitis C Virus Nucleotide Analog NS5B Polymerase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], RNA Replicase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190828",
"SamplePackage": "N",
"IndicationAndUsage": "HARVONI is indicated for the treatment of adults and pediatric patients 3 years of age and older with chronic hepatitis C virus (HCV) [see Dosage and Administration (2.2 and 2.3) and Clinical Studies (14)]: 1 genotype 1, 4, 5, or 6 infection without cirrhosis or with compensated cirrhosis, 2 genotype 1 infection with decompensated cirrhosis, for use in combination with ribavirin, 3 genotype 1 or 4 infection who are liver transplant recipients without cirrhosis or with compensated cirrhosis, for use in combination with ribavirin.",
"Description": "Tablets. HARVONI tablets are fixed-dose combination tablets containing ledipasvir and sofosbuvir for oral administration. Ledipasvir is an HCV NS5A inhibitor and sofosbuvir is a nucleotide analog inhibitor of HCV NS5B polymerase. Each 90 mg/400 mg tablet contains 90 mg ledipasvir and 400 mg sofosbuvir. The tablets include the following inactive ingredients: colloidal silicon dioxide, copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing the following inactive ingredients: FD&C yellow #6/sunset yellow FCF aluminum lake, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each 45 mg/200 mg tablet contains 45 mg ledipasvir and 200 mg sofosbuvir. The tablets include the following inactive ingredients: colloidal silicon dioxide, copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide."
},
{
"NDCCode": "70710-1006-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1006-6) ",
"NDC11Code": "70710-1006-06",
"ProductNDC": "70710-1006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Misoprostol",
"NonProprietaryName": "Misoprostol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210201",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MISOPROSTOL",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200114",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1007-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1007-6) ",
"NDC11Code": "70710-1007-06",
"ProductNDC": "70710-1007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Misoprostol",
"NonProprietaryName": "Misoprostol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210201",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "MISOPROSTOL",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200114",
"SamplePackage": "N"
},
{
"NDCCode": "70710-1021-6",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE (70710-1021-6) ",
"NDC11Code": "70710-1021-06",
"ProductNDC": "70710-1021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albendazole",
"NonProprietaryName": "Albendazole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208979",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ALBENDAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200511",
"SamplePackage": "N",
"IndicationAndUsage": "Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).",
"Description": "Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide."
},
{
"NDCCode": "70710-1050-6",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (70710-1050-6) ",
"NDC11Code": "70710-1050-06",
"ProductNDC": "70710-1050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210575",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210504",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution."
},
{
"NDCCode": "70710-1051-6",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (70710-1051-6) ",
"NDC11Code": "70710-1051-06",
"ProductNDC": "70710-1051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atazanavir",
"NonProprietaryName": "Atazanavir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210575",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATAZANAVIR SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210504",
"SamplePackage": "N",
"IndicationAndUsage": "Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .",
"Description": "The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution."
},
{
"NDCCode": "70710-1165-6",
"PackageDescription": "1 BOTTLE in 1 CARTON (70710-1165-6) / 60 mL in 1 BOTTLE",
"NDC11Code": "70710-1165-06",
"ProductNDC": "70710-1165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oseltamivir Phosphate",
"NonProprietaryName": "Oseltamivir Phosphate",
"DosageFormName": "FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20170914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209113",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "OSELTAMIVIR PHOSPHATE",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-03-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170914",
"SamplePackage": "N",
"IndicationAndUsage": "Oseltamivir Phosphate is an influenza neuraminidase inhibitor (NAI) indicated for: 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. (1.1), 2 Prophylaxis of influenza A and B in patients 1 year and older. (1.2).",
"Description": "Oseltamivir Phosphate for Oral Suspension, an influenza neuraminidase inhibitor (NAI), is available as a powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains sorbitol, titanium dioxide, xanthan gum, sodium benzoate, monosodium citrate, tutti-frutti flavoring, and saccharin sodium. Oseltamivir phosphate is a white crystalline solid with the chemical name (3R,4R,5S)-4-acetylamino-5- amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C16H28N2O4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows."
},
{
"NDCCode": "70710-1205-6",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1205-6) ",
"NDC11Code": "70710-1205-06",
"ProductNDC": "70710-1205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl Fumarate",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210538",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200928",
"SamplePackage": "Y",
"IndicationAndUsage": "Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "70710-1243-6",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (70710-1243-6) ",
"NDC11Code": "70710-1243-06",
"ProductNDC": "70710-1243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tofacitinib",
"NonProprietaryName": "Tofacitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209829",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TOFACITINIB CITRATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260511",
"SamplePackage": "N",
"IndicationAndUsage": "Tofacitinib tablets are Janus kinase (JAK) inhibitors. Tofacitinib tablets are indicated for the treatment of adult patients with: 1 Moderately to severely active rheumatoid arthritis (RA),who have had an inadequate response or intolerance to one or more TNF blockers., 2 Active psoriatic arthritis (PsA),who have had an inadequate response or intolerance to one or more TNF blockers., 3 Active ankylosing spondylitis (AS),who have had an inadequate response or intolerance to one or more TNF blockers., 4 Moderately to severely active ulcerative colitis (UC),who have had an inadequate response or intolerance to one or more TNF blockers.",
"Description": "Tofacitinib tablets are formulated with the citrate salt of tofacitinib, a JAK inhibitor. Tofacitinib citrate is a white to off-white powder and soluble in dimethylsulfoxide and. insoluble in water with the following chemical name: (3R,4R)-4-methyl-3-(methyl-7Hpyrrolo [2,3-d]pyrimidin-4-ylamino)-ß-oxo-1-piperidinepropanenitrile, 2-hydroxy-1,2,3- propanetricarboxylate (1:1). The solubility of tofacitinib citrate in water is 2.9 mg/mL. Tofacitinib citrate has a molecular weight of 504.5 Daltons (or 312.4 Daltons as the. tofacitinib free base) and a molecular formula of C16H20N6OC6H8O7. The chemical. structure of tofacitinib citrate is. Each 5 mg and 10 mg film-coated tablet contains tofacitinib equivalent to 8.08 mg and 16.15 mg of tofacitinib citrate respectively for oral administration and contains following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and titanium dioxide. Additionally, each 10 mg tablet contains FD&C blue #1 Aluminum Lake and iron oxide yellow."
},
{
"NDCCode": "70710-1272-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1272-6) ",
"NDC11Code": "70710-1272-06",
"ProductNDC": "70710-1272",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213719",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250708",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake."
},
{
"NDCCode": "70710-1273-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1273-6) ",
"NDC11Code": "70710-1273-06",
"ProductNDC": "70710-1273",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213719",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250708",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake."
},
{
"NDCCode": "70710-1274-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (70710-1274-6) ",
"NDC11Code": "70710-1274-06",
"ProductNDC": "70710-1274",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250708",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213719",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250708",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake."
},
{
"NDCCode": "70710-1302-7",
"PackageDescription": "5 BLISTER PACK in 1 POUCH (70710-1302-7) / 6 SUPPOSITORY in 1 BLISTER PACK (70710-1302-6) ",
"NDC11Code": "70710-1302-07",
"ProductNDC": "70710-1302",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20200214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208953",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2025-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200214",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine is an aminosalicylate indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.",
"Description": "The active ingredient in Mesalamine suppositories, USP 1000 mg is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each Mesalamine suppository, USP contains 1000 mg of mesalamine, USP (micronized) in a base of hard fat. Mesalamine, USP (micronized) are light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. It is slightly soluble in water; very slightly soluble in methanol, in dehydrated alcohol, and in acetone; practically insoluble in n-butyl alcohol, in chloroform, in ether, in ethyl acetate, in n-hexane, in methylene chloride, and in n-propyl alcohol; soluble in dilute hydrochloric acid and in dilute alkali hydroxides. The molecular formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70710-1804-6</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (70710-1804-6) </PackageDescription>
<NDC11Code>70710-1804-06</NDC11Code>
<ProductNDC>70710-1804</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zituvimet Xr</ProprietaryName>
<NonProprietaryName>Sitagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241031</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216778</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SITAGLIPTIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZITUVIMET XR is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use. ZITUVIMET XR is not recommended in patients with type 1 diabetes mellitus. ZITUVIMET XR has not been studied in patients with a history of pancreatitis. It is unknown whether patients with a history of pancreatitis are at increased risk for the development of pancreatitis while using ZITUVIMET XR [see Warnings and Precautions (5.2)].</IndicationAndUsage>
<Description>ZITUVIMET XR tablets for oral use contain two antihyperglycemic medications: sitagliptin and metformin hydrochloride. Sitagliptin. Sitagliptin is an orally-active inhibitor of the DPP-4 enzyme. Sitagliptin free base drug substance is used to manufacture ZITUVIMET XR. Sitagliptin free base is described chemically as 7-[(3R)-3-amino-1-oxo-4-(2,4,5-trifluorophenyl)butyl]-5,6,7,8-tetrahydro-3-(trifluoromethyl)-1,2,4-triazolo[4,3-α]pyrazine with an empirical formula of C16H15F6N5O and a molecular weight of 407.31. The structural formula is. Sitagliptin free base is a white to off-white, non-hygroscopic powder. It is soluble in methanol and slightly soluble in water. Metformin HCl. Metformin HCl (N,N-dimethylimidodicarbonimidic diamide HCl) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62. Metformin HCl is freely soluble in water, slightly soluble in ethanol (95%), practically insoluble in acetone and in methylene chloride. The pKa of metformin HCl is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. The structural formula is as shown. ZITUVIMET XR. ZITUVIMET XR is available as film-coated tablets containing: 1 50 mg sitagliptin and 389.93 mg of metformin equivalent to 500 mg metformin HCl (ZITUVIMET XR 50/500)., 2 50 mg sitagliptin and 779.86 mg of metformin equivalent to 1,000 mg metformin HCl (ZITUVIMET XR 50/1,000)., 3 100 mg sitagliptin and 779.86 mg of metformin equivalent to 1,000 mg metformin HCl (ZITUVIMET XR 100/1,000).</Description>
</NDC>
<NDC>
<NDCCode>0220-1804-41</NDCCode>
<PackageDescription>6 [hp_C] in 1 TUBE (0220-1804-41) </PackageDescription>
<NDC11Code>00220-1804-41</NDC11Code>
<ProductNDC>0220-1804</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dulcamara</ProprietaryName>
<NonProprietaryName>Solanum Dulcamara Top</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>SOLANUM DULCAMARA TOP</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/6[hp_C]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-02-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Joint Pain Triggered By Dampness*.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-1804-6</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (71335-1804-6) </PackageDescription>
<NDC11Code>71335-1804-06</NDC11Code>
<ProductNDC>71335-1804</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204776</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib is indicated.</IndicationAndUsage>
<Description>Celecoxib capsule is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)- 3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure:. Celecoxib USP is a white or almost white crystalline powder with a pKa of 11.1 (sulfonamide moiety). Celecoxib USP is hydrophobic (log P is 3.5) and is soluble in ethanol and in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsules include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone and sodium lauryl sulfate. The empty hard gelatin capsule shell contains gelatin and titanium dioxide. The capsules are printed with ink containing black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>72162-1804-1</NDCCode>
<PackageDescription>5 PACKAGE in 1 CARTON (72162-1804-1) / 6 SUPPOSITORY in 1 PACKAGE</PackageDescription>
<NDC11Code>72162-1804-01</NDC11Code>
<ProductNDC>72162-1804</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20190605</StartMarketingDate>
<EndMarketingDate>20261031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207448</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190605</StartMarketingDatePackage>
<EndMarketingDatePackage>20261031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
<Description>The active ingredient in mesalamine suppositories 1000 mg for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an anti-inflammatory drug. Each mesalamine suppository contains 1000 mg of mesalamine (USP) in a base of Hard Fat, NF. The empirical formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>72162-1804-3</NDCCode>
<PackageDescription>5 PACKAGE in 1 CARTON (72162-1804-3) / 6 SUPPOSITORY in 1 PACKAGE</PackageDescription>
<NDC11Code>72162-1804-03</NDC11Code>
<ProductNDC>72162-1804</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20190605</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207448</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine suppositories are indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
<Description>The active ingredient in mesalamine suppositories 1000 mg for rectal use is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an anti-inflammatory drug. Each mesalamine suppository contains 1000 mg of mesalamine (USP) in a base of Hard Fat, NF. The empirical formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0026-3942-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3942-25) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) </PackageDescription>
<NDC11Code>00026-3942-25</NDC11Code>
<ProductNDC>0026-3942</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3942-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3942-99) * 2.5 mL in 1 VIAL (0026-4942-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) </PackageDescription>
<NDC11Code>00026-3942-99</NDC11Code>
<ProductNDC>0026-3942</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3944-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3944-25) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) </PackageDescription>
<NDC11Code>00026-3944-25</NDC11Code>
<ProductNDC>0026-3944</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3944-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3944-99) * 2.5 mL in 1 VIAL (0026-4944-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) </PackageDescription>
<NDC11Code>00026-3944-99</NDC11Code>
<ProductNDC>0026-3944</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3946-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3946-25) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) </PackageDescription>
<NDC11Code>00026-3946-25</NDC11Code>
<ProductNDC>0026-3946</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3946-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3946-99) * 2.5 mL in 1 VIAL (0026-4946-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) </PackageDescription>
<NDC11Code>00026-3946-99</NDC11Code>
<ProductNDC>0026-3946</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3948-25</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3948-25) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) </PackageDescription>
<NDC11Code>00026-3948-25</NDC11Code>
<ProductNDC>0026-3948</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3948-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3948-99) * 2.5 mL in 1 VIAL (0026-4948-99) * 2.5 mL in 1 SYRINGE (0026-0426-02) * 2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) </PackageDescription>
<NDC11Code>00026-3948-99</NDC11Code>
<ProductNDC>0026-3948</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180830</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3950-50</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3950-50) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) </PackageDescription>
<NDC11Code>00026-3950-50</NDC11Code>
<ProductNDC>0026-3950</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20241202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>0026-3950-99</NDCCode>
<PackageDescription>1 KIT in 1 BOX (0026-3950-99) * 5 mL in 1 VIAL (0026-4950-99) * 5 mL in 1 SYRINGE (0026-0426-05) * 5 mL in 1 VIAL, SINGLE-USE (0026-4950-01) * 5 mL in 1 SYRINGE (0026-0426-15) </PackageDescription>
<NDC11Code>00026-3950-99</NDC11Code>
<ProductNDC>0026-3950</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Jivi</ProprietaryName>
<NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20241202</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125661</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .</IndicationAndUsage>
<Description>JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins.</Description>
</NDC>
<NDC>
<NDCCode>53002-1804-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-1804-0) </PackageDescription>
<NDC11Code>53002-1804-00</NDC11Code>
<ProductNDC>53002-1804</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Benazepril Hydrochloride</ProprietaryName>
<NonProprietaryName>Amlodipine And Benazepril Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202239</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; BENAZEPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Decreased Blood Pressure [PE], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine and benazepril hydrochloride capsules are a combination capsule of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB) and benazepril, an angiotensin-converting enzyme (ACE) inhibitor. Amlodipine and benazepril hydrochloride capsules are indicated for the treatment of hypertension in patients not adequately controlled on monotherapy with either agent. (1).</IndicationAndUsage>
<Description>Amlodipine and benazepril hydrochloride capsules USP are a combination of amlodipine besylate and benazepril hydrochloride. Benazepril hydrochloride USP is a white to off-white, crystalline powder, soluble (greater than 100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride’s chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is:. Its molecular formula is C24H28N2O5HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl ACE inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Amlodipine besylate USP is a white or almost white powder, slightly soluble in water and sparingly soluble in ethanol. Its chemical name is (R,S)3-ethyl-5-methyl-2-(2-aminoethoxymethyl)-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate benzenesulfonate; its structural formula is:. Its molecular formula is C20H25ClN2O5C6H6O3S, and its molecular weight is 567.1. Amlodipine besylate is the besylate salt of amlodipine, a dihydropyridine calcium channel blocker. Amlodipine and benazepril hydrochloride is available as capsules containing amlodipine besylate USP (3.5 mg, 6.9 mg or 13.9 mg, equivalent to 2.5 mg, 5 mg or 10 mg of amlodipine respectively), with 10 mg, 20 mg, or 40 mg of benazepril hydrochloride USP providing for the following available combinations: 2.5 mg/10 mg, 5 mg/10 mg, 5 mg/20 mg, 5 mg/40 mg, 10 mg/20 mg, and 10 mg/40 mg. The inactive ingredients of the capsules are colloidal silicon dioxide, crospovidone, gelatin, magnesium stearate, microcrystalline cellulose, povidone, sodium lauryl sulfate, and titanium dioxide. In addition, the hard gelatin capsule shells of 5 mg/10 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 5 mg/20 mg contains iron oxide red, 5 mg/40 mg and 10 mg/40 mg contains FD&C Blue 1, FD&C Red 3, and 10 mg/20 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, and FD&C Yellow 5. The capsules are printed with edible ink containing black iron oxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>57955-1804-2</NDCCode>
<PackageDescription>59 mL in 1 BOTTLE, SPRAY (57955-1804-2)</PackageDescription>
<NDC11Code>57955-1804-02</NDC11Code>
<ProductNDC>57955-1804</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Arthritis Pain And Joint Relief / Soulagement De La Douleur Arthritique Et Articulaire</ProprietaryName>
<NonProprietaryName>Actaea Spicata, Aesculus Hippocastanum, Arnica Montana, Bellis Perennis, Bryonia, Calcarea Carbonica, Calcarea Fluorica, Causticum, Cimicifuga Racemosa, Formicum Acidum, Hypericum Perforatum, Ledum Palustre, Lithium Carbonicum, Magnesia Phosphorica, Phosphorus, Phytolacca Decandra, Pulsatilla, Rhododendron Chrysanthum, Rhus Toxicodendron, Ruta Graveolens, Salicylicum Acidum, Sepia, Zincum Metallicum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140806</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>King Bio Inc.</LabelerName>
<SubstanceName>ACTAEA SPICATA ROOT; HORSE CHESTNUT; ARNICA MONTANA; BELLIS PERENNIS; BRYONIA ALBA ROOT; OYSTER SHELL CALCIUM CARBONATE, CRUDE; CALCIUM FLUORIDE; CAUSTICUM; BLACK COHOSH; FORMIC ACID; HYPERICUM PERFORATUM; LEDUM PALUSTRE TWIG; LITHIUM CARBONATE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE; PHOSPHORUS; PHYTOLACCA AMERICANA ROOT; PULSATILLA VULGARIS; RHODODENDRON AUREUM LEAF; TOXICODENDRON PUBESCENS LEAF; RUTA GRAVEOLENS FLOWERING TOP; SALICYLIC ACID; SEPIA OFFICINALIS JUICE; ZINC</SubstanceName>
<StrengthNumber>10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10</StrengthNumber>
<StrengthUnit>[hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Indications: A homeopathic remedy for the temporary relief of symptoms due to arthritic pain: 1 inflammation, 2 back pain, 3 stiff and swollen joints, 4 leg cramps, 5 rheumatic pain, 6 sore tendons and ligaments, 7 sprains and join injuries, 8 bone injury, 9 contracted fingers, 10 hip and joint pain, 11 knee pain, 12 aching limbs, 13 sciatic pain, 14 restless limbs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>61958-1804-1</NDCCode>
<PackageDescription>120 PELLET in 1 PACKET (61958-1804-1) </PackageDescription>
<NDC11Code>61958-1804-01</NDC11Code>
<ProductNDC>61958-1804</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Harvoni</ProprietaryName>
<NonProprietaryName>Ledipasvir And Sofosbuvir</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190828</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212477</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc</LabelerName>
<SubstanceName>LEDIPASVIR; SOFOSBUVIR</SubstanceName>
<StrengthNumber>45; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Hepatitis C Virus NS5A Inhibitor [EPC], Hepatitis C Virus Nucleotide Analog NS5B Polymerase Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA], RNA Replicase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HARVONI is indicated for the treatment of adults and pediatric patients 3 years of age and older with chronic hepatitis C virus (HCV) [see Dosage and Administration (2.2 and 2.3) and Clinical Studies (14)]: 1 genotype 1, 4, 5, or 6 infection without cirrhosis or with compensated cirrhosis, 2 genotype 1 infection with decompensated cirrhosis, for use in combination with ribavirin, 3 genotype 1 or 4 infection who are liver transplant recipients without cirrhosis or with compensated cirrhosis, for use in combination with ribavirin.</IndicationAndUsage>
<Description>Tablets. HARVONI tablets are fixed-dose combination tablets containing ledipasvir and sofosbuvir for oral administration. Ledipasvir is an HCV NS5A inhibitor and sofosbuvir is a nucleotide analog inhibitor of HCV NS5B polymerase. Each 90 mg/400 mg tablet contains 90 mg ledipasvir and 400 mg sofosbuvir. The tablets include the following inactive ingredients: colloidal silicon dioxide, copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing the following inactive ingredients: FD&C yellow #6/sunset yellow FCF aluminum lake, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each 45 mg/200 mg tablet contains 45 mg ledipasvir and 200 mg sofosbuvir. The tablets include the following inactive ingredients: colloidal silicon dioxide, copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1006-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1006-6) </PackageDescription>
<NDC11Code>70710-1006-06</NDC11Code>
<ProductNDC>70710-1006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Misoprostol</ProprietaryName>
<NonProprietaryName>Misoprostol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210201</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MISOPROSTOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1007-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1007-6) </PackageDescription>
<NDC11Code>70710-1007-06</NDC11Code>
<ProductNDC>70710-1007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Misoprostol</ProprietaryName>
<NonProprietaryName>Misoprostol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210201</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>MISOPROSTOL</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70710-1021-6</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (70710-1021-6) </PackageDescription>
<NDC11Code>70710-1021-06</NDC11Code>
<ProductNDC>70710-1021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albendazole</ProprietaryName>
<NonProprietaryName>Albendazole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208979</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALBENDAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).</IndicationAndUsage>
<Description>Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1050-6</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (70710-1050-6) </PackageDescription>
<NDC11Code>70710-1050-06</NDC11Code>
<ProductNDC>70710-1050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210575</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>70710-1051-6</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (70710-1051-6) </PackageDescription>
<NDC11Code>70710-1051-06</NDC11Code>
<ProductNDC>70710-1051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atazanavir</ProprietaryName>
<NonProprietaryName>Atazanavir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210575</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATAZANAVIR SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inhibitors [MoA], UGT1A1 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atazanavir capsules are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection for patients 3 months and older weighing at least 5 kg. Limitations of Use: 1 Atazanavir capsules are not recommended for use in pediatric patients below the age of 3 months due to the risk of kernicterus., 2 Use of atazanavir/ritonavir in treatment-experienced patients should be guided by the number of baseline primary protease inhibitor resistance substitutions [see Microbiology (12.4)] .</IndicationAndUsage>
<Description>The active ingredient in atazanavir capsules is atazanavir sulfate, which is an HIV-1 protease inhibitor. The chemical name for atazanavir sulfate is (3S,8S,9S,12S)-3,12-Bis(1,1-dimethylethyl)-8-hydroxy-4,11-dioxo-9-(phenylmethyl)-6-[[4-(2-pyridinyl)phenyl]methyl]-2,5,6,10,13-pentaazatetradecanedioic acid dimethyl ester, sulfate (1:1). Its molecular formula is C38H52N6O7H2SO4, which corresponds to a molecular weight of 802.93 (sulfuric acid salt). The free base molecular weight is 704.9. Atazanavir sulfate has the following structural formula. Atazanavir sulfate is a white to pale-yellow crystalline powder. It is soluble in methanol and in ethyl alcohol, insoluble in water. Each hard gelatin capsule intended for oral administration contains atazanavir sulfate equivalent to 150 mg or 200 mg or 300 mg of atazanavir containing following inactive ingredients: crospovidone, gelatin, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. Additionally, each 150 mg capsule shell contains: FD&C Blue 1, D&C Red 28, FD &C Red 40 and D&C Yellow 10. Each 200 mg capsule shell contains: FD&C Blue 1 and D&C Red 28. Each 300 mg capsule shell contains: FD&C Blue 1, D&C Red 28, iron oxide yellow and iron oxide red. The capsule is imprinted with black pharmaceutical ink and contains following inactive ingredients: black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>70710-1165-6</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70710-1165-6) / 60 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70710-1165-06</NDC11Code>
<ProductNDC>70710-1165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oseltamivir Phosphate</ProprietaryName>
<NonProprietaryName>Oseltamivir Phosphate</NonProprietaryName>
<DosageFormName>FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209113</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>OSELTAMIVIR PHOSPHATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oseltamivir Phosphate is an influenza neuraminidase inhibitor (NAI) indicated for: 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. (1.1), 2 Prophylaxis of influenza A and B in patients 1 year and older. (1.2).</IndicationAndUsage>
<Description>Oseltamivir Phosphate for Oral Suspension, an influenza neuraminidase inhibitor (NAI), is available as a powder for oral suspension, which when constituted with water as directed contains 6 mg per mL oseltamivir base. In addition to the active ingredient, the powder for oral suspension contains sorbitol, titanium dioxide, xanthan gum, sodium benzoate, monosodium citrate, tutti-frutti flavoring, and saccharin sodium. Oseltamivir phosphate is a white crystalline solid with the chemical name (3R,4R,5S)-4-acetylamino-5- amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C16H28N2O4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows.</Description>
</NDC>
<NDC>
<NDCCode>70710-1205-6</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1205-6) </PackageDescription>
<NDC11Code>70710-1205-06</NDC11Code>
<ProductNDC>70710-1205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl Fumarate</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210538</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200928</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>70710-1243-6</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70710-1243-6) </PackageDescription>
<NDC11Code>70710-1243-06</NDC11Code>
<ProductNDC>70710-1243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tofacitinib</ProprietaryName>
<NonProprietaryName>Tofacitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209829</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TOFACITINIB CITRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tofacitinib tablets are Janus kinase (JAK) inhibitors. Tofacitinib tablets are indicated for the treatment of adult patients with: 1 Moderately to severely active rheumatoid arthritis (RA),who have had an inadequate response or intolerance to one or more TNF blockers., 2 Active psoriatic arthritis (PsA),who have had an inadequate response or intolerance to one or more TNF blockers., 3 Active ankylosing spondylitis (AS),who have had an inadequate response or intolerance to one or more TNF blockers., 4 Moderately to severely active ulcerative colitis (UC),who have had an inadequate response or intolerance to one or more TNF blockers.</IndicationAndUsage>
<Description>Tofacitinib tablets are formulated with the citrate salt of tofacitinib, a JAK inhibitor. Tofacitinib citrate is a white to off-white powder and soluble in dimethylsulfoxide and. insoluble in water with the following chemical name: (3R,4R)-4-methyl-3-(methyl-7Hpyrrolo [2,3-d]pyrimidin-4-ylamino)-ß-oxo-1-piperidinepropanenitrile, 2-hydroxy-1,2,3- propanetricarboxylate (1:1). The solubility of tofacitinib citrate in water is 2.9 mg/mL. Tofacitinib citrate has a molecular weight of 504.5 Daltons (or 312.4 Daltons as the. tofacitinib free base) and a molecular formula of C16H20N6OC6H8O7. The chemical. structure of tofacitinib citrate is. Each 5 mg and 10 mg film-coated tablet contains tofacitinib equivalent to 8.08 mg and 16.15 mg of tofacitinib citrate respectively for oral administration and contains following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and titanium dioxide. Additionally, each 10 mg tablet contains FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1272-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1272-6) </PackageDescription>
<NDC11Code>70710-1272-06</NDC11Code>
<ProductNDC>70710-1272</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213719</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1273-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1273-6) </PackageDescription>
<NDC11Code>70710-1273-06</NDC11Code>
<ProductNDC>70710-1273</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213719</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1274-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (70710-1274-6) </PackageDescription>
<NDC11Code>70710-1274-06</NDC11Code>
<ProductNDC>70710-1274</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250708</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213719</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: : 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilysin inhibitor, and valsartan, an angiotensin II receptor blocker. Sacubitril and valsartan tablets contain a complex comprised of anionic forms of sacubitril and valsartan, sodium cations, and water molecules in the molar ratio of 1:1:3:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium [3-((1S,3R)-1-biphenyl-4-yl methyl-3-ethoxycarbonyl-1-butylcarbamoyl)propionate-(S)-3-methyl-2-(pentanoyl{2-(tetrazol-5-ylate)biphenyl-4-ylmethyl} amino)butyrate] trihydrate. Its molecular formula (trihydrate) is C48H55N6O8Na3 3H2O. Its molecular mass is 967 and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. Each film-coated tablet contains following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, low substituted hyproxypropylcellulose, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate and titanium dioxide. Additionally, each 49 mg/51 mg tablet contains ferrosoferric oxide, iron oxide red and iron oxide yellow and each 97 mg/103 mg tablet contains FD&C blue #2 Aluminum Lake, FD&C red #40 Aluminum Lake and FD&C yellow #5 (tartrazine) Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1302-7</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 POUCH (70710-1302-7) / 6 SUPPOSITORY in 1 BLISTER PACK (70710-1302-6) </PackageDescription>
<NDC11Code>70710-1302-07</NDC11Code>
<ProductNDC>70710-1302</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20200214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208953</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine is an aminosalicylate indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
<Description>The active ingredient in Mesalamine suppositories, USP 1000 mg is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each Mesalamine suppository, USP contains 1000 mg of mesalamine, USP (micronized) in a base of hard fat. Mesalamine, USP (micronized) are light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. It is slightly soluble in water; very slightly soluble in methanol, in dehydrated alcohol, and in acetone; practically insoluble in n-butyl alcohol, in chloroform, in ether, in ethyl acetate, in n-hexane, in methylene chloride, and in n-propyl alcohol; soluble in dilute hydrochloric acid and in dilute alkali hydroxides. The molecular formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is.</Description>
</NDC>
</NDCList>