{
"NDC": [
{
"NDCCode": "70710-1846-7",
"PackageDescription": "24 POUCH in 1 CARTON (70710-1846-7) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "70710-1846-07",
"ProductNDC": "70710-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20240905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217893",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240905",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.237 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.4 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 1.57 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of tan-colored polyethylene/polyester film; (2) a drug layer of scopolamine, povidone and silicone adhesive; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of scopolamine, povidone and silicone adhesive. A protective, oversized release liner of fluorosilicone-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system."
},
{
"NDCCode": "71335-1846-7",
"PackageDescription": "112 TABLET in 1 BOTTLE (71335-1846-7) ",
"NDC11Code": "71335-1846-07",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241007",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "70710-1846-2",
"PackageDescription": "10 POUCH in 1 CARTON (70710-1846-2) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "70710-1846-02",
"ProductNDC": "70710-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20240905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217893",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240905",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.237 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.4 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 1.57 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of tan-colored polyethylene/polyester film; (2) a drug layer of scopolamine, povidone and silicone adhesive; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of scopolamine, povidone and silicone adhesive. A protective, oversized release liner of fluorosilicone-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system."
},
{
"NDCCode": "70710-1846-4",
"PackageDescription": "4 POUCH in 1 CARTON (70710-1846-4) / 1 PATCH in 1 POUCH (70710-1846-1) / 3 d in 1 PATCH",
"NDC11Code": "70710-1846-04",
"ProductNDC": "70710-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20240905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217893",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240905",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.237 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.4 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 1.57 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of tan-colored polyethylene/polyester film; (2) a drug layer of scopolamine, povidone and silicone adhesive; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of scopolamine, povidone and silicone adhesive. A protective, oversized release liner of fluorosilicone-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system."
},
{
"NDCCode": "61589-1846-1",
"PackageDescription": "1 BOTTLE in 1 CARTON (61589-1846-1) > 30 g in 1 BOTTLE",
"NDC11Code": "61589-1846-01",
"ProductNDC": "61589-1846",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "No7 Stay Perfect Foundation Sunscreen Broad Spectrum Spf 15 Deeply Beige",
"NonProprietaryName": "Octinoxate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150710",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "BCM Cosmetique SAS",
"SubstanceName": "OCTINOXATE",
"StrengthNumber": "7.5",
"StrengthUnit": "g/30g",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20191220",
"SamplePackage": "N",
"IndicationAndUsage": "Directions for suncreen use. apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 monhts of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. limit time in the sun, especially from 10 a.m. - 2 p.m. wear long-sleeved shirts, pants, hats, and sunglasses."
},
{
"NDCCode": "71335-1846-0",
"PackageDescription": "100 TABLET in 1 BOTTLE (71335-1846-0) ",
"NDC11Code": "71335-1846-00",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241007",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-1",
"PackageDescription": "30 TABLET in 1 BOTTLE (71335-1846-1) ",
"NDC11Code": "71335-1846-01",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210707",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-2",
"PackageDescription": "120 TABLET in 1 BOTTLE (71335-1846-2) ",
"NDC11Code": "71335-1846-02",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241007",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-3",
"PackageDescription": "60 TABLET in 1 BOTTLE (71335-1846-3) ",
"NDC11Code": "71335-1846-03",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210615",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-4",
"PackageDescription": "90 TABLET in 1 BOTTLE (71335-1846-4) ",
"NDC11Code": "71335-1846-04",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210615",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-5",
"PackageDescription": "40 TABLET in 1 BOTTLE (71335-1846-5) ",
"NDC11Code": "71335-1846-05",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241007",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-6",
"PackageDescription": "20 TABLET in 1 BOTTLE (71335-1846-6) ",
"NDC11Code": "71335-1846-06",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241007",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-8",
"PackageDescription": "84 TABLET in 1 BOTTLE (71335-1846-8) ",
"NDC11Code": "71335-1846-08",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241007",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "71335-1846-9",
"PackageDescription": "15 TABLET in 1 BOTTLE (71335-1846-9) ",
"NDC11Code": "71335-1846-09",
"ProductNDC": "71335-1846",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211610",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 60",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241007",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only)."
},
{
"NDCCode": "72594-1846-8",
"PackageDescription": "89 mL in 1 TUBE, WITH APPLICATOR (72594-1846-8) ",
"NDC11Code": "72594-1846-08",
"ProductNDC": "72594-1846",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neptune Ice",
"NonProprietaryName": "Lidocaine, Menthol, Camphor, And Dimethicone Gel",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181010",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Neptune Products L.L.C.",
"SubstanceName": "CAMPHOR (NATURAL); DIMETHICONE; LIDOCAINE; MENTHOL",
"StrengthNumber": ".0291; .0291; .0388; .0097",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Skin Barrier Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181010",
"SamplePackage": "N",
"IndicationAndUsage": "For the temporary relief of joint pain and muscle pain associated with: 1 Arthritis, 2 Backache, 3 Discomfort, 4 Cramps, 5 Neckache, 6 Soreness, 7 Sprains, 8 Strains."
},
{
"NDCCode": "70710-1021-7",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (70710-1021-7) ",
"NDC11Code": "70710-1021-07",
"ProductNDC": "70710-1021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albendazole",
"NonProprietaryName": "Albendazole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208979",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ALBENDAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20181217",
"SamplePackage": "N",
"IndicationAndUsage": "Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).",
"Description": "Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide."
},
{
"NDCCode": "70710-1030-7",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (70710-1030-7) ",
"NDC11Code": "70710-1030-07",
"ProductNDC": "70710-1030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210154",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230307",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "70710-1031-7",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (70710-1031-7) ",
"NDC11Code": "70710-1031-07",
"ProductNDC": "70710-1031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210154",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220912",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "70710-1032-7",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (70710-1032-7) ",
"NDC11Code": "70710-1032-07",
"ProductNDC": "70710-1032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210154",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220912",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "70710-1114-8",
"PackageDescription": "2 CARTON in 1 CARTON (70710-1114-8) / 1 BLISTER PACK in 1 CARTON (70710-1114-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1114-08",
"ProductNDC": "70710-1114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209668",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230214",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2."
},
{
"NDCCode": "70710-1115-8",
"PackageDescription": "2 CARTON in 1 CARTON (70710-1115-8) / 1 BLISTER PACK in 1 CARTON (70710-1115-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1115-08",
"ProductNDC": "70710-1115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209668",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "14",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230214",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2."
},
{
"NDCCode": "70710-1123-7",
"PackageDescription": "50 TABLET, FILM COATED in 1 BOTTLE (70710-1123-7) ",
"NDC11Code": "70710-1123-07",
"ProductNDC": "70710-1123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209582",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180111",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent's infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline tablets USP, 50 mg, 75 mg, 100 mg and 150 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, 100 mg or 150 mg of doxycycline, USP for oral administration. Doxycycline, USP is light yellow to pale yellow powder, very slightly soluble in alcohol and water; practically insoluble in ether. It dissolves in dilute solutions of mineral acids and in solutions of alkali hydroxides and carbonates. Its molecular weight is 462.45. The chemical designation of doxycycline is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients are as follows: colloidal silicon dioxide, crospovidone, hydroxyl propyl methylcellulose, magnesium stearate and microcrystalline cellulose, titanium dioxide. In addition. 50 mg tablets contain: D&C yellow#10 aluminum lake, FD&C blue#2, iron oxide yellow, polyethylene glycol and polysorbate 80. 75 mg tablets contain: iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. 100 mg tablets contain: D&C yellow#10 aluminum lake, FD&C red#40, iron oxide yellow, polyethylene glycol, polysorbate 80. 150 mg tablets contain: D&C yellow#10 aluminum lake, iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. The Product meets USP dissolution test - 2."
},
{
"NDCCode": "70710-1139-7",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70710-1139-7) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "70710-1139-07",
"ProductNDC": "70710-1139",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208963",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170406",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70710-1179-7",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70710-1179-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1179-07",
"ProductNDC": "70710-1179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210058",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake."
},
{
"NDCCode": "70710-1180-7",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70710-1180-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1180-07",
"ProductNDC": "70710-1180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210058",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake."
},
{
"NDCCode": "70710-1190-3",
"PackageDescription": "3 POUCH in 1 CARTON (70710-1190-3) / 1 POUCH in 1 POUCH (70710-1190-1) / 7 mg in 1 POUCH",
"NDC11Code": "70710-1190-03",
"ProductNDC": "70710-1190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norelgestromin And Ethinyl Estradiol",
"NonProprietaryName": "Norelgestromin And Ethinyl Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20231121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214594",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "NORELGESTROMIN; ETHINYL ESTRADIOL",
"StrengthNumber": "150; 35",
"StrengthUnit": "ug/mg; ug/mg",
"Pharm_Classes": "Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231121",
"SamplePackage": "N",
"IndicationAndUsage": "Norelgestromin and ethinyl estradiol transdermal system is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Norelgestromin and ethinyl estradiol transdermal system may be less effective in preventing pregnancy in women who weigh 198 lbs (90 kg) or more. Norelgestromin and ethinyl estradiol transdermal system is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].",
"Description": "Norelgestromin and ethinyl estradiol transdermal system is a transdermal system with a contact surface area of 15.75 cm2. It contains 4.678 mg norelgestromin, USP (NGMN) and 0.53 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN and 35 mcg of EE per day. Systemic exposures (as measured by area under the curve [AUC] and steady state concentration [Css]) of NGMN and EE during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing NGM 250 mcg / EE 35 mcg. [See Boxed Warning and Clinical Pharmacology (12.3).]. Norelgestromin and ethinyl estradiol transdermal system is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a peach flexible film consisting of a pigmented polyethylene outer layer and a polyester inner layer. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains crospovidone, lauryl lactate, polyisobutylene/polybutene adhesive and non-woven polyester fabric as inactive components. The active components in this layer are the hormones, NGMN and EE. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyethylene terephthalate (PET) film with a polydimethylsiloxane coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with \"Norelgestromin and ethinyl estradiol 150/35 mcg per day\" in red ink. Norelgestromin and ethinyl estradiol transdermal system is packaged with additional piece of protective film above the system within each pouch. This piece of protective film is removed and discarded at the time of use. The structural formulas of the components are. Molecular weight, NGMN: 327.47. Molecular weight, EE: 296.41. Chemical name for NGMN: 18, 19-dinorpregn-4-en-20-yn-3-one, 13-ethyl-, 17-hydroxy, 3-oxime, (17α)-. Chemical name for EE: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17β-diol, (17α)-."
},
{
"NDCCode": "70710-1196-7",
"PackageDescription": "30 POUCH in 1 CARTON (70710-1196-7) / 24 h in 1 POUCH (70710-1196-1) ",
"NDC11Code": "70710-1196-07",
"ProductNDC": "70710-1196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine",
"NonProprietaryName": "Rivastigmine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206318",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIVASTIGMINE",
"StrengthNumber": "4.6",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).",
"Description": "Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene."
},
{
"NDCCode": "70710-1197-7",
"PackageDescription": "30 POUCH in 1 CARTON (70710-1197-7) / 24 h in 1 POUCH (70710-1197-1) ",
"NDC11Code": "70710-1197-07",
"ProductNDC": "70710-1197",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine",
"NonProprietaryName": "Rivastigmine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206318",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIVASTIGMINE",
"StrengthNumber": "9.5",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).",
"Description": "Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene."
},
{
"NDCCode": "70710-1198-7",
"PackageDescription": "30 POUCH in 1 CARTON (70710-1198-7) / 24 h in 1 POUCH (70710-1198-1) ",
"NDC11Code": "70710-1198-07",
"ProductNDC": "70710-1198",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine",
"NonProprietaryName": "Rivastigmine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206318",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIVASTIGMINE",
"StrengthNumber": "13.3",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).",
"Description": "Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene."
},
{
"NDCCode": "70710-1204-7",
"PackageDescription": "14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1204-7) ",
"NDC11Code": "70710-1204-07",
"ProductNDC": "70710-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl Fumarate",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210538",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200928",
"SamplePackage": "Y",
"IndicationAndUsage": "Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70710-1846-7</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (70710-1846-7) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>70710-1846-07</NDC11Code>
<ProductNDC>70710-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20240905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217893</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240905</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.237 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.4 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 1.57 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of tan-colored polyethylene/polyester film; (2) a drug layer of scopolamine, povidone and silicone adhesive; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of scopolamine, povidone and silicone adhesive. A protective, oversized release liner of fluorosilicone-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-7</NDCCode>
<PackageDescription>112 TABLET in 1 BOTTLE (71335-1846-7) </PackageDescription>
<NDC11Code>71335-1846-07</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>70710-1846-2</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (70710-1846-2) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>70710-1846-02</NDC11Code>
<ProductNDC>70710-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20240905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217893</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240905</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.237 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.4 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 1.57 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of tan-colored polyethylene/polyester film; (2) a drug layer of scopolamine, povidone and silicone adhesive; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of scopolamine, povidone and silicone adhesive. A protective, oversized release liner of fluorosilicone-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>70710-1846-4</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (70710-1846-4) / 1 PATCH in 1 POUCH (70710-1846-1) / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>70710-1846-04</NDC11Code>
<ProductNDC>70710-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20240905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217893</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240905</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.237 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.4 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 0.2 mm thick, 1.57 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of tan-colored polyethylene/polyester film; (2) a drug layer of scopolamine, povidone and silicone adhesive; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of scopolamine, povidone and silicone adhesive. A protective, oversized release liner of fluorosilicone-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>61589-1846-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (61589-1846-1) > 30 g in 1 BOTTLE</PackageDescription>
<NDC11Code>61589-1846-01</NDC11Code>
<ProductNDC>61589-1846</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>No7 Stay Perfect Foundation Sunscreen Broad Spectrum Spf 15 Deeply Beige</ProprietaryName>
<NonProprietaryName>Octinoxate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150710</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>BCM Cosmetique SAS</LabelerName>
<SubstanceName>OCTINOXATE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>g/30g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions for suncreen use. apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 monhts of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. limit time in the sun, especially from 10 a.m. - 2 p.m. wear long-sleeved shirts, pants, hats, and sunglasses.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-1846-0</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (71335-1846-0) </PackageDescription>
<NDC11Code>71335-1846-00</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (71335-1846-1) </PackageDescription>
<NDC11Code>71335-1846-01</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-2</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (71335-1846-2) </PackageDescription>
<NDC11Code>71335-1846-02</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-3</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71335-1846-3) </PackageDescription>
<NDC11Code>71335-1846-03</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-4</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71335-1846-4) </PackageDescription>
<NDC11Code>71335-1846-04</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-5</NDCCode>
<PackageDescription>40 TABLET in 1 BOTTLE (71335-1846-5) </PackageDescription>
<NDC11Code>71335-1846-05</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-6</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (71335-1846-6) </PackageDescription>
<NDC11Code>71335-1846-06</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-8</NDCCode>
<PackageDescription>84 TABLET in 1 BOTTLE (71335-1846-8) </PackageDescription>
<NDC11Code>71335-1846-08</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>71335-1846-9</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE (71335-1846-9) </PackageDescription>
<NDC11Code>71335-1846-09</NDC11Code>
<ProductNDC>71335-1846</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211610</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). · Have not been tolerated, or are not expected to be tolerated. · Have not provided adequate analgesia, or are not expected to provide adequate analgesia. Acetaminophen and codeine phosphate tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Acetaminophen and Codeine Phosphate Tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula: C8H9NO2 M.W. 151.16 Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula: C18H21NO3 H3PO4 ½H2O M.W. 406.37 Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/15 mg contains: Acetaminophen USP………………..…300 mg Codeine Phosphate USP……………….15 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/30 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….30 mg Each Acetaminophen and Codeine Phosphate Tablet USP, 300 mg/60 mg contains: Acetaminophen USP……………..……300 mg Codeine Phosphate USP……………….60 mg In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, stearic acid, FD&C Red #40 aluminum lake (300 mg/15 mg only), and FD&C Blue#1 aluminum lake (300 mg/60 mg only).</Description>
</NDC>
<NDC>
<NDCCode>72594-1846-8</NDCCode>
<PackageDescription>89 mL in 1 TUBE, WITH APPLICATOR (72594-1846-8) </PackageDescription>
<NDC11Code>72594-1846-08</NDC11Code>
<ProductNDC>72594-1846</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neptune Ice</ProprietaryName>
<NonProprietaryName>Lidocaine, Menthol, Camphor, And Dimethicone Gel</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181010</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Neptune Products L.L.C.</LabelerName>
<SubstanceName>CAMPHOR (NATURAL); DIMETHICONE; LIDOCAINE; MENTHOL</SubstanceName>
<StrengthNumber>.0291; .0291; .0388; .0097</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Skin Barrier Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the temporary relief of joint pain and muscle pain associated with: 1 Arthritis, 2 Backache, 3 Discomfort, 4 Cramps, 5 Neckache, 6 Soreness, 7 Sprains, 8 Strains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70710-1021-7</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (70710-1021-7) </PackageDescription>
<NDC11Code>70710-1021-07</NDC11Code>
<ProductNDC>70710-1021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albendazole</ProprietaryName>
<NonProprietaryName>Albendazole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208979</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALBENDAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).</IndicationAndUsage>
<Description>Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1030-7</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (70710-1030-7) </PackageDescription>
<NDC11Code>70710-1030-07</NDC11Code>
<ProductNDC>70710-1030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210154</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>70710-1031-7</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (70710-1031-7) </PackageDescription>
<NDC11Code>70710-1031-07</NDC11Code>
<ProductNDC>70710-1031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210154</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>70710-1032-7</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (70710-1032-7) </PackageDescription>
<NDC11Code>70710-1032-07</NDC11Code>
<ProductNDC>70710-1032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210154</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>70710-1114-8</NDCCode>
<PackageDescription>2 CARTON in 1 CARTON (70710-1114-8) / 1 BLISTER PACK in 1 CARTON (70710-1114-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1114-08</NDC11Code>
<ProductNDC>70710-1114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209668</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2.</Description>
</NDC>
<NDC>
<NDCCode>70710-1115-8</NDCCode>
<PackageDescription>2 CARTON in 1 CARTON (70710-1115-8) / 1 BLISTER PACK in 1 CARTON (70710-1115-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1115-08</NDC11Code>
<ProductNDC>70710-1115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209668</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2.</Description>
</NDC>
<NDC>
<NDCCode>70710-1123-7</NDCCode>
<PackageDescription>50 TABLET, FILM COATED in 1 BOTTLE (70710-1123-7) </PackageDescription>
<NDC11Code>70710-1123-07</NDC11Code>
<ProductNDC>70710-1123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209582</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent's infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline tablets USP, 50 mg, 75 mg, 100 mg and 150 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, 100 mg or 150 mg of doxycycline, USP for oral administration. Doxycycline, USP is light yellow to pale yellow powder, very slightly soluble in alcohol and water; practically insoluble in ether. It dissolves in dilute solutions of mineral acids and in solutions of alkali hydroxides and carbonates. Its molecular weight is 462.45. The chemical designation of doxycycline is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients are as follows: colloidal silicon dioxide, crospovidone, hydroxyl propyl methylcellulose, magnesium stearate and microcrystalline cellulose, titanium dioxide. In addition. 50 mg tablets contain: D&C yellow#10 aluminum lake, FD&C blue#2, iron oxide yellow, polyethylene glycol and polysorbate 80. 75 mg tablets contain: iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. 100 mg tablets contain: D&C yellow#10 aluminum lake, FD&C red#40, iron oxide yellow, polyethylene glycol, polysorbate 80. 150 mg tablets contain: D&C yellow#10 aluminum lake, iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. The Product meets USP dissolution test - 2.</Description>
</NDC>
<NDC>
<NDCCode>70710-1139-7</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70710-1139-7) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1139-07</NDC11Code>
<ProductNDC>70710-1139</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208963</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70710-1179-7</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70710-1179-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1179-07</NDC11Code>
<ProductNDC>70710-1179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210058</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1180-7</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70710-1180-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1180-07</NDC11Code>
<ProductNDC>70710-1180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210058</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1190-3</NDCCode>
<PackageDescription>3 POUCH in 1 CARTON (70710-1190-3) / 1 POUCH in 1 POUCH (70710-1190-1) / 7 mg in 1 POUCH</PackageDescription>
<NDC11Code>70710-1190-03</NDC11Code>
<ProductNDC>70710-1190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norelgestromin And Ethinyl Estradiol</ProprietaryName>
<NonProprietaryName>Norelgestromin And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20231121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214594</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>NORELGESTROMIN; ETHINYL ESTRADIOL</SubstanceName>
<StrengthNumber>150; 35</StrengthNumber>
<StrengthUnit>ug/mg; ug/mg</StrengthUnit>
<Pharm_Classes>Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norelgestromin and ethinyl estradiol transdermal system is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Norelgestromin and ethinyl estradiol transdermal system may be less effective in preventing pregnancy in women who weigh 198 lbs (90 kg) or more. Norelgestromin and ethinyl estradiol transdermal system is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Norelgestromin and ethinyl estradiol transdermal system is a transdermal system with a contact surface area of 15.75 cm2. It contains 4.678 mg norelgestromin, USP (NGMN) and 0.53 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN and 35 mcg of EE per day. Systemic exposures (as measured by area under the curve [AUC] and steady state concentration [Css]) of NGMN and EE during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing NGM 250 mcg / EE 35 mcg. [See Boxed Warning and Clinical Pharmacology (12.3).]. Norelgestromin and ethinyl estradiol transdermal system is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a peach flexible film consisting of a pigmented polyethylene outer layer and a polyester inner layer. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains crospovidone, lauryl lactate, polyisobutylene/polybutene adhesive and non-woven polyester fabric as inactive components. The active components in this layer are the hormones, NGMN and EE. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyethylene terephthalate (PET) film with a polydimethylsiloxane coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with "Norelgestromin and ethinyl estradiol 150/35 mcg per day" in red ink. Norelgestromin and ethinyl estradiol transdermal system is packaged with additional piece of protective film above the system within each pouch. This piece of protective film is removed and discarded at the time of use. The structural formulas of the components are. Molecular weight, NGMN: 327.47. Molecular weight, EE: 296.41. Chemical name for NGMN: 18, 19-dinorpregn-4-en-20-yn-3-one, 13-ethyl-, 17-hydroxy, 3-oxime, (17α)-. Chemical name for EE: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17β-diol, (17α)-.</Description>
</NDC>
<NDC>
<NDCCode>70710-1196-7</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (70710-1196-7) / 24 h in 1 POUCH (70710-1196-1) </PackageDescription>
<NDC11Code>70710-1196-07</NDC11Code>
<ProductNDC>70710-1196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine</ProprietaryName>
<NonProprietaryName>Rivastigmine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206318</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIVASTIGMINE</SubstanceName>
<StrengthNumber>4.6</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).</IndicationAndUsage>
<Description>Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene.</Description>
</NDC>
<NDC>
<NDCCode>70710-1197-7</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (70710-1197-7) / 24 h in 1 POUCH (70710-1197-1) </PackageDescription>
<NDC11Code>70710-1197-07</NDC11Code>
<ProductNDC>70710-1197</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine</ProprietaryName>
<NonProprietaryName>Rivastigmine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206318</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIVASTIGMINE</SubstanceName>
<StrengthNumber>9.5</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).</IndicationAndUsage>
<Description>Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene.</Description>
</NDC>
<NDC>
<NDCCode>70710-1198-7</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (70710-1198-7) / 24 h in 1 POUCH (70710-1198-1) </PackageDescription>
<NDC11Code>70710-1198-07</NDC11Code>
<ProductNDC>70710-1198</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine</ProprietaryName>
<NonProprietaryName>Rivastigmine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206318</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIVASTIGMINE</SubstanceName>
<StrengthNumber>13.3</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).</IndicationAndUsage>
<Description>Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene.</Description>
</NDC>
<NDC>
<NDCCode>70710-1204-7</NDCCode>
<PackageDescription>14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1204-7) </PackageDescription>
<NDC11Code>70710-1204-07</NDC11Code>
<ProductNDC>70710-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl Fumarate</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210538</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200928</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
</NDCList>