{
"NDC": [
{
"NDCCode": "70710-1937-7",
"PackageDescription": "25 CARTON in 1 CARTON (70710-1937-7) / 5 VIAL in 1 CARTON (70710-1937-5) / 2 mL in 1 VIAL (70710-1937-1) ",
"NDC11Code": "70710-1937-07",
"ProductNDC": "70710-1937",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231017",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214215",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-12-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231017",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil hydrochloride injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride USP 2.5 mg/mL and sodium chloride USP 8.5 mg/mL in water for injection USP. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid NF or sodium hydroxide NF for pH adjustment; pH is 4.0 to 6.0. The chemical name of verapamil hydrochloride USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) monohydrochloride. Verapamil hydrochloride USP is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C27H38N2O4 HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "67296-1937-7",
"PackageDescription": "15 TABLET in 1 BOTTLE (67296-1937-7) ",
"NDC11Code": "67296-1937-07",
"ProductNDC": "67296-1937",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201278",
"LabelerName": "RedPharm Drug",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-12-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140828",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains."
},
{
"NDCCode": "70518-1937-7",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-1937-7) ",
"NDC11Code": "70518-1937-07",
"ProductNDC": "70518-1937",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078235",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260316",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate is indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older ( 1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate capsules, USP are available as 15 mg, 25 mg and 50 mg sprinkle capsules for oral administration as whole capsules or opened and sprinkled onto soft food. Topiramate, USP is a white to off-white crystalline powder with bitter taste. It is freely soluble in dichloromethane. Topiramate has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Each topiramate tablet,USP intended for oral administration contains 25 mg or 50 mg or 100 mg or 200 mg of topiramate. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Each topiramate capsule, USP intended for oral administration contains 15 mg or 25 mg or 50 mg of topiramate. In addition, each capsule contains the following inactive ingredients: cellulose acetate, gelatin, hypromellose, povidone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and water. Each capsule is printed with black pharmaceutical ink and contains the following inactive ingredients: shellac, propylene glycol, black iron oxide and potassium hydroxide. Topiramate Capsules, USP meet USP dissolution test 2."
},
{
"NDCCode": "71335-1937-7",
"PackageDescription": "25 TABLET, FILM COATED in 1 BOTTLE (71335-1937-7) ",
"NDC11Code": "71335-1937-07",
"ProductNDC": "71335-1937",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carvedilol",
"NonProprietaryName": "Carvedilol",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078251",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CARVEDILOL",
"StrengthNumber": "6.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240408",
"SamplePackage": "N",
"IndicationAndUsage": "Carvedilol tablets are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients (1.2), 3 hypertension (1.3) .",
"Description": "Carvedilol, USP is a nonselective β-adrenergic blocking agent with α1-blocking activity. It is (±)-1-(Carbazol-4-yloxy)-3-[[2-(o-methoxyphenoxy)ethyl]amino]-2-propanol. Carvedilol, USP is a racemic mixture with the following structure. Carvedilol tablets, USP are film-coated tablets containing 3.125 mg, 6.25 mg, 12.5 mg or 25 mg of carvedilol. The 3.125 mg, 6.25 mg and 25 mg tablets are white film-coated circular shaped tablets. The 12.5 mg tablets are white film-coated capsule shaped tablets. Inactive ingredients consist of colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. Carvedilol, USP is a white to off-white powder with a molecular weight of 406.5 g/mol and a molecular formula of C24H26N2O4. It is freely soluble in dimethylsulfoxide; soluble in methylene chloride and methanol; sparingly soluble in 95% ethanol and isopropanol; slightly soluble in ethyl ether; and practically insoluble in water, gastric fluid (simulated, TS, pH 1.1), and intestinal fluid (simulated, TS without pancreatin, pH 7.5). The product meets USP Dissolution test 2."
},
{
"NDCCode": "70710-1021-7",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (70710-1021-7) ",
"NDC11Code": "70710-1021-07",
"ProductNDC": "70710-1021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albendazole",
"NonProprietaryName": "Albendazole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20181217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208979",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ALBENDAZOLE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20181217",
"SamplePackage": "N",
"IndicationAndUsage": "Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).",
"Description": "Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide."
},
{
"NDCCode": "70710-1030-7",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (70710-1030-7) ",
"NDC11Code": "70710-1030-07",
"ProductNDC": "70710-1030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230307",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210154",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230307",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "70710-1031-7",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (70710-1031-7) ",
"NDC11Code": "70710-1031-07",
"ProductNDC": "70710-1031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210154",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220912",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "70710-1032-7",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (70710-1032-7) ",
"NDC11Code": "70710-1032-07",
"ProductNDC": "70710-1032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210154",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220912",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac."
},
{
"NDCCode": "70710-1114-8",
"PackageDescription": "2 CARTON in 1 CARTON (70710-1114-8) / 1 BLISTER PACK in 1 CARTON (70710-1114-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1114-08",
"ProductNDC": "70710-1114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209668",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "7",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230214",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2."
},
{
"NDCCode": "70710-1115-8",
"PackageDescription": "2 CARTON in 1 CARTON (70710-1115-8) / 1 BLISTER PACK in 1 CARTON (70710-1115-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1115-08",
"ProductNDC": "70710-1115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Teriflunomide",
"NonProprietaryName": "Teriflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209668",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TERIFLUNOMIDE",
"StrengthNumber": "14",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230214",
"SamplePackage": "N",
"IndicationAndUsage": "Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).",
"Description": "Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2."
},
{
"NDCCode": "70710-1123-7",
"PackageDescription": "50 TABLET, FILM COATED in 1 BOTTLE (70710-1123-7) ",
"NDC11Code": "70710-1123-07",
"ProductNDC": "70710-1123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209582",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180111",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent's infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline tablets USP, 50 mg, 75 mg, 100 mg and 150 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, 100 mg or 150 mg of doxycycline, USP for oral administration. Doxycycline, USP is light yellow to pale yellow powder, very slightly soluble in alcohol and water; practically insoluble in ether. It dissolves in dilute solutions of mineral acids and in solutions of alkali hydroxides and carbonates. Its molecular weight is 462.45. The chemical designation of doxycycline is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients are as follows: colloidal silicon dioxide, crospovidone, hydroxyl propyl methylcellulose, magnesium stearate and microcrystalline cellulose, titanium dioxide. In addition. 50 mg tablets contain: D&C yellow#10 aluminum lake, FD&C blue#2, iron oxide yellow, polyethylene glycol and polysorbate 80. 75 mg tablets contain: iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. 100 mg tablets contain: D&C yellow#10 aluminum lake, FD&C red#40, iron oxide yellow, polyethylene glycol, polysorbate 80. 150 mg tablets contain: D&C yellow#10 aluminum lake, iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. The Product meets USP dissolution test - 2."
},
{
"NDCCode": "70710-1139-7",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70710-1139-7) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "70710-1139-07",
"ProductNDC": "70710-1139",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208963",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170406",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70710-1179-7",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70710-1179-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1179-07",
"ProductNDC": "70710-1179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210058",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake."
},
{
"NDCCode": "70710-1180-7",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70710-1180-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70710-1180-07",
"ProductNDC": "70710-1180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambrisentan",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210058",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.",
"Description": "Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake."
},
{
"NDCCode": "70710-1190-3",
"PackageDescription": "3 POUCH in 1 CARTON (70710-1190-3) / 1 POUCH in 1 POUCH (70710-1190-1) / 7 mg in 1 POUCH",
"NDC11Code": "70710-1190-03",
"ProductNDC": "70710-1190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norelgestromin And Ethinyl Estradiol",
"NonProprietaryName": "Norelgestromin And Ethinyl Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20231121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214594",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "NORELGESTROMIN; ETHINYL ESTRADIOL",
"StrengthNumber": "150; 35",
"StrengthUnit": "ug/mg; ug/mg",
"Pharm_Classes": "Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231121",
"SamplePackage": "N",
"IndicationAndUsage": "Norelgestromin and ethinyl estradiol transdermal system is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Norelgestromin and ethinyl estradiol transdermal system may be less effective in preventing pregnancy in women who weigh 198 lbs (90 kg) or more. Norelgestromin and ethinyl estradiol transdermal system is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].",
"Description": "Norelgestromin and ethinyl estradiol transdermal system is a transdermal system with a contact surface area of 15.75 cm2. It contains 4.678 mg norelgestromin, USP (NGMN) and 0.53 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN and 35 mcg of EE per day. Systemic exposures (as measured by area under the curve [AUC] and steady state concentration [Css]) of NGMN and EE during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing NGM 250 mcg / EE 35 mcg. [See Boxed Warning and Clinical Pharmacology (12.3).]. Norelgestromin and ethinyl estradiol transdermal system is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a peach flexible film consisting of a pigmented polyethylene outer layer and a polyester inner layer. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains crospovidone, lauryl lactate, polyisobutylene/polybutene adhesive and non-woven polyester fabric as inactive components. The active components in this layer are the hormones, NGMN and EE. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyethylene terephthalate (PET) film with a polydimethylsiloxane coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with \"Norelgestromin and ethinyl estradiol 150/35 mcg per day\" in red ink. Norelgestromin and ethinyl estradiol transdermal system is packaged with additional piece of protective film above the system within each pouch. This piece of protective film is removed and discarded at the time of use. The structural formulas of the components are. Molecular weight, NGMN: 327.47. Molecular weight, EE: 296.41. Chemical name for NGMN: 18, 19-dinorpregn-4-en-20-yn-3-one, 13-ethyl-, 17-hydroxy, 3-oxime, (17α)-. Chemical name for EE: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17β-diol, (17α)-."
},
{
"NDCCode": "70710-1196-7",
"PackageDescription": "30 POUCH in 1 CARTON (70710-1196-7) / 24 h in 1 POUCH (70710-1196-1) ",
"NDC11Code": "70710-1196-07",
"ProductNDC": "70710-1196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine",
"NonProprietaryName": "Rivastigmine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206318",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIVASTIGMINE",
"StrengthNumber": "4.6",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).",
"Description": "Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene."
},
{
"NDCCode": "70710-1197-7",
"PackageDescription": "30 POUCH in 1 CARTON (70710-1197-7) / 24 h in 1 POUCH (70710-1197-1) ",
"NDC11Code": "70710-1197-07",
"ProductNDC": "70710-1197",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine",
"NonProprietaryName": "Rivastigmine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206318",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIVASTIGMINE",
"StrengthNumber": "9.5",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).",
"Description": "Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene."
},
{
"NDCCode": "70710-1198-7",
"PackageDescription": "30 POUCH in 1 CARTON (70710-1198-7) / 24 h in 1 POUCH (70710-1198-1) ",
"NDC11Code": "70710-1198-07",
"ProductNDC": "70710-1198",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivastigmine",
"NonProprietaryName": "Rivastigmine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190306",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206318",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "RIVASTIGMINE",
"StrengthNumber": "13.3",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190306",
"SamplePackage": "N",
"IndicationAndUsage": "Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).",
"Description": "Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene."
},
{
"NDCCode": "70710-1204-7",
"PackageDescription": "14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1204-7) ",
"NDC11Code": "70710-1204-07",
"ProductNDC": "70710-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dimethyl Fumarate",
"NonProprietaryName": "Dimethyl Fumarate",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200928",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210538",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "DIMETHYL FUMARATE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200928",
"SamplePackage": "Y",
"IndicationAndUsage": "Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.",
"Description": "Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "70710-1302-7",
"PackageDescription": "5 BLISTER PACK in 1 POUCH (70710-1302-7) / 6 SUPPOSITORY in 1 BLISTER PACK (70710-1302-6) ",
"NDC11Code": "70710-1302-07",
"ProductNDC": "70710-1302",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesalamine",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20200214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208953",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Active",
"LastUpdate": "2025-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200214",
"SamplePackage": "N",
"IndicationAndUsage": "Mesalamine is an aminosalicylate indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.",
"Description": "The active ingredient in Mesalamine suppositories, USP 1000 mg is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each Mesalamine suppository, USP contains 1000 mg of mesalamine, USP (micronized) in a base of hard fat. Mesalamine, USP (micronized) are light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. It is slightly soluble in water; very slightly soluble in methanol, in dehydrated alcohol, and in acetone; practically insoluble in n-butyl alcohol, in chloroform, in ether, in ethyl acetate, in n-hexane, in methylene chloride, and in n-propyl alcohol; soluble in dilute hydrochloric acid and in dilute alkali hydroxides. The molecular formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is."
},
{
"NDCCode": "70710-1397-7",
"PackageDescription": "14 TABLET in 1 BOTTLE (70710-1397-7) ",
"NDC11Code": "70710-1397-07",
"ProductNDC": "70710-1397",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eltrombopag",
"NonProprietaryName": "Eltrombopag",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216281",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ELTROMBOPAG OLAMINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260114",
"SamplePackage": "N",
"IndicationAndUsage": "Eltrombopag is a thrombopoietin receptor agonist indicated: 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins or splenectomy. Eltrombopag should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1), 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2), 3 in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3), 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3).",
"Description": "Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid-2-aminoethanol (1:2). It has the molecular formula C25H22N4O4.2(C2H7NO). The molecular weight is 564.64 g/mol for eltrombopag olamine and 442.48 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is practically insoluble in aqueous buffer across a pH range of 1 to 7.5, very slightly soluble in water, slightly soluble in methanol and ethanol. Each film-coated tablets contain eltrombopag olamine equivalent to 12.5 mg, 25 mg, 50 mg or 75 mg of eltrombopag free acid and contains the following inactive ingredients: hypromellose, microcrystalline cellulose, polyethylene glycol, povidone (k-30), sodium starch glycolate, sodium stearyl fumarate, titanium dioxide and xylitol. Additionally, each 25 mg tablet contains iron oxide red and iron oxide yellow, each 50 mg tablet contains FD&C blue #2 Aluminum Lake and each 75 mg tablet contains ferrosoferric oxide and iron oxide red."
},
{
"NDCCode": "70710-1467-7",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (70710-1467-7) ",
"NDC11Code": "70710-1467-07",
"ProductNDC": "70710-1467",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colestipol Hydrochloride",
"NonProprietaryName": "Colestipol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215223",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "COLESTIPOL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220504",
"SamplePackage": "N",
"IndicationAndUsage": "Since no drug is innocuous, strict attention should be paid to the indications and contraindications, particularly when selecting drugs for chronic long-term use. Colestipol hydrochloride tablets are indicated as adjunctive therapy to diet for the reduction of elevated serum total and LDL-C in patients with primary hypercholesterolemia (elevated LDL-C) who do not respond adequately to diet. Generally, colestipol hydrochloride tablets have no clinically significant effect on serum triglycerides, but with their use, triglyceride levels may be raised in some patients. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy (see NCEP guidelines). A minimum of six months of intensive dietary therapy and counseling should be carried out prior to initiation of drug therapy. Shorter periods may be considered in patients with severe elevations of LDL-C or with definite CHD. According to the NCEP guidelines, the goal of treatment is to lower LDL-C and LDL-C is to be used to initiate and assess treatment response. Only if LDL-C levels are not available, should the Total-C be used to monitor therapy. The NCEP treatment guidelines are shown below.",
"Description": "The active ingredient in colestipol hydrochloride tablets is colestipol hydrochloride, which is a lipid lowering agent for oral use. Colestipol is an insoluble, high molecular weight basic anion-exchange copolymer of diethylenetriamine and 1-chloro-2,3-epoxpropane (hydrochloride), with approximately one out of five amine nitrogens protonated. It is a yellow to orange powder or beads water-insoluble resin which is hygroscopic and swells when suspended in water or aqueous fluids. Each colestipol hydrochloride tablet contains one gram of colestipol hydrochloride. Colestipol hydrochloride tablets are light yellow to yellow in color and are tasteless and odorless. Inactive ingredients: cellacefate, colloidal silicon dioxide, crospovidone, ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, povidone, and triacetin."
},
{
"NDCCode": "70710-1477-7",
"PackageDescription": "30 POUCH in 1 CARTON (70710-1477-7) > 1 PATCH in 1 POUCH (70710-1477-1) > 14 h in 1 PATCH",
"NDC11Code": "70710-1477-07",
"ProductNDC": "70710-1477",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin Transdermal System",
"NonProprietaryName": "Nitroglycerin Transdermal System",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20180208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089885",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".1",
"StrengthUnit": "mg/h",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180208",
"SamplePackage": "N",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.03 mg of nitroglycerin per hour. Thus, the 3.5-cm2 system delivers approximately 0.1 mg of nitroglycerin per hour. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 6% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises 3 layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a transparent outer backing layer composed of a composite plastic film and is printed with the name of the drug and strength; 2) nitroglycerin in acrylic-based polymer adhesive with a cross-linking agent; 3) a protective white, translucent peelable silicone treated polystyrene release liner which covers the second layer and must be removed-prior to use. The inactive ingredients are: multilayer plastic film (polyolefin/EVA/PVDC), silicone coated polystyrene film, acrylic adhesive with a cross-linking agent and blue ink. Cross section of the system."
},
{
"NDCCode": "70710-1508-8",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (70710-1508-8) / 14 TABLET, FOR SUSPENSION in 1 BLISTER PACK (70710-1508-7) ",
"NDC11Code": "70710-1508-08",
"ProductNDC": "70710-1508",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosentan",
"NonProprietaryName": "Bosentan",
"DosageFormName": "TABLET, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20260217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213981",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "BOSENTAN",
"StrengthNumber": "32",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260217",
"SamplePackage": "N",
"IndicationAndUsage": "Bosentan tablets for oral suspension are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1): 1 in adults to improve exercise ability and to decrease clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (60%), PAH associated with connective tissue diseases (21%) and PAH associated with congenital heart disease with left-to-right shunts (18%) [see Clinical Studies (14.1)] ., 2 in pediatric patients aged 3 years and older with idiopathic or congenital PAH to improve pulmonary vascular resistance (PVR), which is expected to result in an improvement in exercise ability.",
"Description": "Bosentan tablets for oral suspension is an endothelin receptor antagonist that belongs to a class of highly substituted pyrimidine derivatives, with no chiral centers. It is designated chemically as 4-tert-butyl-N-[6-(2-hydroxy-ethoxy)-5-(2-methoxy-phenoxy)-[2,2´]-bipyrimidin -4-yl]-benzenesulfonamide monohydrate and has the following structural formula. Bosentan has a molecular weight of 569.63 and a molecular formula of C27H29N5O6S.H2O. Bosentan is a white to yellowish powder. It is soluble in acetonitrile, slightly soluble in methanol and practically insoluble in water. In the solid state, bosentan is very stable, is not hygroscopic and is not light sensitive. Bosentan is available as a 32 mg tablet for oral suspension and contains the following excipients: acesulfame potassium, aspartame, basic butylated methacrylate copolymer, colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, mannitol, sodium lauryl sulfate, stearic acid, talcum and tutti frutti flavor. Each dispersible tablet contains 2.08 mg of phenylalanine. Each dispersible tablet contains 33.045 mg of bosentan monohydrate, equivalent to 32 mg anhydrous bosentan."
},
{
"NDCCode": "70710-1584-4",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (70710-1584-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1584-7) ",
"NDC11Code": "70710-1584-04",
"ProductNDC": "70710-1584",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214501",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260221",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow."
},
{
"NDCCode": "70710-1585-4",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (70710-1585-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1585-7) ",
"NDC11Code": "70710-1585-04",
"ProductNDC": "70710-1585",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214501",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260221",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow."
},
{
"NDCCode": "70710-1586-4",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (70710-1586-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1586-7) ",
"NDC11Code": "70710-1586-04",
"ProductNDC": "70710-1586",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214501",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260221",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow."
},
{
"NDCCode": "70710-1587-4",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (70710-1587-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1587-7) ",
"NDC11Code": "70710-1587-04",
"ProductNDC": "70710-1587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214501",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260221",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow."
},
{
"NDCCode": "70710-1588-4",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (70710-1588-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1588-7) ",
"NDC11Code": "70710-1588-04",
"ProductNDC": "70710-1588",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214501",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260221",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow."
},
{
"NDCCode": "70710-1589-7",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (70710-1589-7) ",
"NDC11Code": "70710-1589-07",
"ProductNDC": "70710-1589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tofacitinib",
"NonProprietaryName": "Tofacitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260605",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209829",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TOFACITINIB CITRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260605",
"SamplePackage": "N",
"IndicationAndUsage": "Tofacitinib tablets are Janus kinase (JAK) inhibitors. Tofacitinib tablets are indicated for the treatment of adult patients with: 1 Moderately to severely active rheumatoid arthritis (RA),who have had an inadequate response or intolerance to one or more TNF blockers., 2 Active psoriatic arthritis (PsA),who have had an inadequate response or intolerance to one or more TNF blockers., 3 Active ankylosing spondylitis (AS),who have had an inadequate response or intolerance to one or more TNF blockers., 4 Moderately to severely active ulcerative colitis (UC),who have had an inadequate response or intolerance to one or more TNF blockers.",
"Description": "Tofacitinib tablets are formulated with the citrate salt of tofacitinib, a JAK inhibitor. Tofacitinib citrate is a white to off-white powder and soluble in dimethylsulfoxide and. insoluble in water with the following chemical name: (3R,4R)-4-methyl-3-(methyl-7Hpyrrolo [2,3-d]pyrimidin-4-ylamino)-ß-oxo-1-piperidinepropanenitrile, 2-hydroxy-1,2,3- propanetricarboxylate (1:1). The solubility of tofacitinib citrate in water is 2.9 mg/mL. Tofacitinib citrate has a molecular weight of 504.5 Daltons (or 312.4 Daltons as the. tofacitinib free base) and a molecular formula of C16H20N6OC6H8O7. The chemical. structure of tofacitinib citrate is. Each 5 mg and 10 mg film-coated tablet contains tofacitinib equivalent to 8.08 mg and 16.15 mg of tofacitinib citrate respectively for oral administration and contains following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and titanium dioxide. Additionally, each 10 mg tablet contains FD&C blue #1 Aluminum Lake and iron oxide yellow."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70710-1937-7</NDCCode>
<PackageDescription>25 CARTON in 1 CARTON (70710-1937-7) / 5 VIAL in 1 CARTON (70710-1937-5) / 2 mL in 1 VIAL (70710-1937-1) </PackageDescription>
<NDC11Code>70710-1937-07</NDC11Code>
<ProductNDC>70710-1937</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231017</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214215</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil hydrochloride injection, USP is indicated for the following: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [W-P-W] and Lown-Ganong-Levine [L-G-L] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to verapamil hydrochloride administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White (W-P-W) and Lown-Ganong-Levine (L-G-L) syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor. Verapamil hydrochloride injection, USP is a sterile, nonpyrogenic solution containing verapamil hydrochloride USP 2.5 mg/mL and sodium chloride USP 8.5 mg/mL in water for injection USP. The solution contains no bacteriostat or antimicrobial agent and is intended for single-dose intravenous administration. May contain hydrochloric acid NF or sodium hydroxide NF for pH adjustment; pH is 4.0 to 6.0. The chemical name of verapamil hydrochloride USP is benzeneacetonitrile, α-[3-[{2-(3,4-dimethoxyphenyl)ethyl} methylamino] propyl]-3,4-dimethoxy-α-(1-methylethyl) monohydrochloride. Verapamil hydrochloride USP is a white or practically white crystalline powder. It is practically odorless and has a bitter taste. It is soluble in water; freely soluble in chloroform; sparingly soluble in alcohol; practically insoluble in ether. It has the following structural formula. Molecular weight: 491.06. Molecular formula: C27H38N2O4 HCl. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>67296-1937-7</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE (67296-1937-7) </PackageDescription>
<NDC11Code>67296-1937-07</NDC11Code>
<ProductNDC>67296-1937</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201278</ApplicationNumber>
<LabelerName>RedPharm Drug</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains.</Description>
</NDC>
<NDC>
<NDCCode>70518-1937-7</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-1937-7) </PackageDescription>
<NDC11Code>70518-1937-07</NDC11Code>
<ProductNDC>70518-1937</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078235</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate is indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older ( 1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate capsules, USP are available as 15 mg, 25 mg and 50 mg sprinkle capsules for oral administration as whole capsules or opened and sprinkled onto soft food. Topiramate, USP is a white to off-white crystalline powder with bitter taste. It is freely soluble in dichloromethane. Topiramate has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Each topiramate tablet,USP intended for oral administration contains 25 mg or 50 mg or 100 mg or 200 mg of topiramate. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Each topiramate capsule, USP intended for oral administration contains 15 mg or 25 mg or 50 mg of topiramate. In addition, each capsule contains the following inactive ingredients: cellulose acetate, gelatin, hypromellose, povidone, sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and water. Each capsule is printed with black pharmaceutical ink and contains the following inactive ingredients: shellac, propylene glycol, black iron oxide and potassium hydroxide. Topiramate Capsules, USP meet USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>71335-1937-7</NDCCode>
<PackageDescription>25 TABLET, FILM COATED in 1 BOTTLE (71335-1937-7) </PackageDescription>
<NDC11Code>71335-1937-07</NDC11Code>
<ProductNDC>71335-1937</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carvedilol</ProprietaryName>
<NonProprietaryName>Carvedilol</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078251</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CARVEDILOL</SubstanceName>
<StrengthNumber>6.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], Adrenergic beta1-Antagonists [MoA], Adrenergic beta2-Antagonists [MoA], alpha-Adrenergic Blocker [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carvedilol tablets are an alpha-/beta-adrenergic blocking agent indicated for the treatment of: 1 mild to severe chronic heart failure (1.1), 2 left ventricular dysfunction following myocardial infarction in clinically stable patients (1.2), 3 hypertension (1.3) .</IndicationAndUsage>
<Description>Carvedilol, USP is a nonselective β-adrenergic blocking agent with α1-blocking activity. It is (±)-1-(Carbazol-4-yloxy)-3-[[2-(o-methoxyphenoxy)ethyl]amino]-2-propanol. Carvedilol, USP is a racemic mixture with the following structure. Carvedilol tablets, USP are film-coated tablets containing 3.125 mg, 6.25 mg, 12.5 mg or 25 mg of carvedilol. The 3.125 mg, 6.25 mg and 25 mg tablets are white film-coated circular shaped tablets. The 12.5 mg tablets are white film-coated capsule shaped tablets. Inactive ingredients consist of colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. Carvedilol, USP is a white to off-white powder with a molecular weight of 406.5 g/mol and a molecular formula of C24H26N2O4. It is freely soluble in dimethylsulfoxide; soluble in methylene chloride and methanol; sparingly soluble in 95% ethanol and isopropanol; slightly soluble in ethyl ether; and practically insoluble in water, gastric fluid (simulated, TS, pH 1.1), and intestinal fluid (simulated, TS without pancreatin, pH 7.5). The product meets USP Dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>70710-1021-7</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (70710-1021-7) </PackageDescription>
<NDC11Code>70710-1021-07</NDC11Code>
<ProductNDC>70710-1021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albendazole</ProprietaryName>
<NonProprietaryName>Albendazole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208979</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ALBENDAZOLE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anthelmintic [EPC], Cytochrome P450 1A Inducers [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albendazole tablets are an anthelmintic drug indicated for: 1 Treatment of parenchymal neurocysticercosis due to active lesions caused by larval forms of the pork tapeworm, Taenia solium . (1.1), 2 Treatment of cystic hydatid disease of the liver, lung, and peritoneum, caused by the larval form of the dog tapeworm, Echinococcus granulosus . (1.2).</IndicationAndUsage>
<Description>Albendazole is an orally administered anthelmintic drug. Chemically, it is methyl 5 - (propylthio)-2-benzimidazolecarbamate. Its molecular formula is C12H15N3O2S. Its molecular weight is 265.34. It has the following chemical structure. Albendazole, USP is a white to faintly yellowish powder. It is freely soluble in anhydrous formic acid, very slightly soluble in ether and in methylene chloride, practically insoluble in alcohol and water. Each film-coated tablet contains albendazole USP, 200 mg and inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, povidone K-30, saccharin sodium, sodium lauryl sulfate, sodium starch glycolate type A (botanical source: potato), talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70710-1030-7</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (70710-1030-7) </PackageDescription>
<NDC11Code>70710-1030-07</NDC11Code>
<ProductNDC>70710-1030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230307</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210154</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>70710-1031-7</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (70710-1031-7) </PackageDescription>
<NDC11Code>70710-1031-07</NDC11Code>
<ProductNDC>70710-1031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210154</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>70710-1032-7</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (70710-1032-7) </PackageDescription>
<NDC11Code>70710-1032-07</NDC11Code>
<ProductNDC>70710-1032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210154</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: 1 Multiple myeloma (MM), in combination with dexamethasone (1.1)., 2 Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities (1.2).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure. 3-(4-amino-1-oxo 1,3-dihydro-2H-isoindol-2-yl) piperidine-2,6-dione. The molecular formula for lenalidomide is C13H13N3O3, and the gram molecular weight is 259.3. Lenalidomide is white to off-white to pale-yellow solid powder. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide capsule is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: croscarmellose sodium, gelatin, lactose anhydrous, lactose monohydrate, magnesium stearate, microcrystalline cellulose and titanium dioxide. Each 2.5 mg capsule shell contains: FD& C Blue # 1, FD& C Red#40 and FD&C Yellow # 6. Each 10 mg capsule shell contains: D&C Red # 33, D&C Yellow# 10 and FD & C Blue # 1. Each 15 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each 20 mg capsule shell contains: D&C Red # 28, D&C Red # 33, D&C Yellow # 10 and FD & C Blue # 1. Each 25 mg capsule shell contains: D&C Red # 28 and FD & C Blue # 1. Each capsule is imprinted with black pharmaceutical ink which contains following inactive ingredients: black iron oxide, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>70710-1114-8</NDCCode>
<PackageDescription>2 CARTON in 1 CARTON (70710-1114-8) / 1 BLISTER PACK in 1 CARTON (70710-1114-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1114-08</NDC11Code>
<ProductNDC>70710-1114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209668</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>7</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2.</Description>
</NDC>
<NDC>
<NDCCode>70710-1115-8</NDCCode>
<PackageDescription>2 CARTON in 1 CARTON (70710-1115-8) / 1 BLISTER PACK in 1 CARTON (70710-1115-7) / 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1115-08</NDC11Code>
<ProductNDC>70710-1115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Teriflunomide</ProprietaryName>
<NonProprietaryName>Teriflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209668</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TERIFLUNOMIDE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dihydroorotate Dehydrogenase Inhibitors [MoA], Pyrimidine Synthesis Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Teriflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. (1).</IndicationAndUsage>
<Description>Teriflunomide is an oral de novo pyrimidine synthesis inhibitor of the DHO-DH enzyme, with the chemical name (Z)-2-Cyano-3-hydroxy-but-2-enoic acid-(4 trifluoromethylphenyl)-amide. Its molecular weight is 270.21, and the molecular formula is C12 H9 F3 N2 O2 with the following chemical structure. Teriflunomide, USP is a white to light yellow powder, sparingly soluble in acetone, slightly soluble in ethanol, very slightly soluble in isopropanol and polyethylene glycol-200 and practically insoluble in water. Each film-coated tablet contains teriflunomide 7 mg or 14 mg and the following inactive ingredients: corn starch, hypromellose, silicified microcrystalline cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycols, sodium starch glycolate and titanium dioxide. Additionally, 14 mg tablet contains FD&C blue #2.</Description>
</NDC>
<NDC>
<NDCCode>70710-1123-7</NDCCode>
<PackageDescription>50 TABLET, FILM COATED in 1 BOTTLE (70710-1123-7) </PackageDescription>
<NDC11Code>70710-1123-07</NDC11Code>
<ProductNDC>70710-1123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209582</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent's infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline tablets USP, 50 mg, 75 mg, 100 mg and 150 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, 100 mg or 150 mg of doxycycline, USP for oral administration. Doxycycline, USP is light yellow to pale yellow powder, very slightly soluble in alcohol and water; practically insoluble in ether. It dissolves in dilute solutions of mineral acids and in solutions of alkali hydroxides and carbonates. Its molecular weight is 462.45. The chemical designation of doxycycline is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients are as follows: colloidal silicon dioxide, crospovidone, hydroxyl propyl methylcellulose, magnesium stearate and microcrystalline cellulose, titanium dioxide. In addition. 50 mg tablets contain: D&C yellow#10 aluminum lake, FD&C blue#2, iron oxide yellow, polyethylene glycol and polysorbate 80. 75 mg tablets contain: iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. 100 mg tablets contain: D&C yellow#10 aluminum lake, FD&C red#40, iron oxide yellow, polyethylene glycol, polysorbate 80. 150 mg tablets contain: D&C yellow#10 aluminum lake, iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. The Product meets USP dissolution test - 2.</Description>
</NDC>
<NDC>
<NDCCode>70710-1139-7</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70710-1139-7) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1139-07</NDC11Code>
<ProductNDC>70710-1139</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208963</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70710-1179-7</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70710-1179-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1179-07</NDC11Code>
<ProductNDC>70710-1179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210058</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1180-7</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70710-1180-7) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70710-1180-07</NDC11Code>
<ProductNDC>70710-1180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambrisentan</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210058</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ambrisentan tablets are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening.</IndicationAndUsage>
<Description>Ambrisentan is an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4, 6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42. It contains a single chiral center determined to be the (S) configuration and has the following structural formula. Figure 1. Ambrisentan Structural Formula. Ambrisentan is a white to light yellow crystalline powder. It is a carboxylic acid with a pKa of 4.0. It is freely soluble in tetrahydrofuran, sparingly soluble in ethyl acetate, slightly soluble in ethanol, practically insoluble in n-hexane, water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Ambrisentan tablets are available as 5 mg and 10 mg film-coated tablets for once daily oral administration and contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, lecithin, magnesium stearate, microcrystalline cellulose, partially hydrolyzed polyvinyl alcohol, polyethylene glycol, povidone, talc and titanium dioxide. Additionally, 5 mg tablet contains: FD&C red#40 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70710-1190-3</NDCCode>
<PackageDescription>3 POUCH in 1 CARTON (70710-1190-3) / 1 POUCH in 1 POUCH (70710-1190-1) / 7 mg in 1 POUCH</PackageDescription>
<NDC11Code>70710-1190-03</NDC11Code>
<ProductNDC>70710-1190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norelgestromin And Ethinyl Estradiol</ProprietaryName>
<NonProprietaryName>Norelgestromin And Ethinyl Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20231121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214594</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>NORELGESTROMIN; ETHINYL ESTRADIOL</SubstanceName>
<StrengthNumber>150; 35</StrengthNumber>
<StrengthUnit>ug/mg; ug/mg</StrengthUnit>
<Pharm_Classes>Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norelgestromin and ethinyl estradiol transdermal system is indicated for the prevention of pregnancy in women with a body mass index (BMI) < 30 kg/m2 for whom a combined hormonal contraceptive is appropriate. Limitations of Use:. Norelgestromin and ethinyl estradiol transdermal system may be less effective in preventing pregnancy in women who weigh 198 lbs (90 kg) or more. Norelgestromin and ethinyl estradiol transdermal system is contraindicated for use in women with BMI ≥ 30 kg/m2 [see Contraindications (4), Warnings and Precautions (5.1) and Clinical Studies (14)].</IndicationAndUsage>
<Description>Norelgestromin and ethinyl estradiol transdermal system is a transdermal system with a contact surface area of 15.75 cm2. It contains 4.678 mg norelgestromin, USP (NGMN) and 0.53 mg ethinyl estradiol, USP (EE), and its delivery rate is approximately 150 mcg of NGMN and 35 mcg of EE per day. Systemic exposures (as measured by area under the curve [AUC] and steady state concentration [Css]) of NGMN and EE during use of norelgestromin and ethinyl estradiol transdermal system are higher and the Cmax is lower than those produced by an oral contraceptive containing NGM 250 mcg / EE 35 mcg. [See Boxed Warning and Clinical Pharmacology (12.3).]. Norelgestromin and ethinyl estradiol transdermal system is a thin, matrix-type transdermal system consisting of three layers. The backing layer is composed of a peach flexible film consisting of a pigmented polyethylene outer layer and a polyester inner layer. It provides structural support and protects the middle adhesive layer from the environment. The middle layer contains crospovidone, lauryl lactate, polyisobutylene/polybutene adhesive and non-woven polyester fabric as inactive components. The active components in this layer are the hormones, NGMN and EE. The third layer is the release liner, which protects the adhesive layer during storage and is removed just prior to application. It is a transparent polyethylene terephthalate (PET) film with a polydimethylsiloxane coating on the side that is in contact with the middle adhesive layer. The outside of the backing layer is printed with "Norelgestromin and ethinyl estradiol 150/35 mcg per day" in red ink. Norelgestromin and ethinyl estradiol transdermal system is packaged with additional piece of protective film above the system within each pouch. This piece of protective film is removed and discarded at the time of use. The structural formulas of the components are. Molecular weight, NGMN: 327.47. Molecular weight, EE: 296.41. Chemical name for NGMN: 18, 19-dinorpregn-4-en-20-yn-3-one, 13-ethyl-, 17-hydroxy, 3-oxime, (17α)-. Chemical name for EE: 19-Norpregna-1,3,5(10)-trien-20-yne-3, 17β-diol, (17α)-.</Description>
</NDC>
<NDC>
<NDCCode>70710-1196-7</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (70710-1196-7) / 24 h in 1 POUCH (70710-1196-1) </PackageDescription>
<NDC11Code>70710-1196-07</NDC11Code>
<ProductNDC>70710-1196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine</ProprietaryName>
<NonProprietaryName>Rivastigmine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206318</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIVASTIGMINE</SubstanceName>
<StrengthNumber>4.6</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).</IndicationAndUsage>
<Description>Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene.</Description>
</NDC>
<NDC>
<NDCCode>70710-1197-7</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (70710-1197-7) / 24 h in 1 POUCH (70710-1197-1) </PackageDescription>
<NDC11Code>70710-1197-07</NDC11Code>
<ProductNDC>70710-1197</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine</ProprietaryName>
<NonProprietaryName>Rivastigmine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206318</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIVASTIGMINE</SubstanceName>
<StrengthNumber>9.5</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).</IndicationAndUsage>
<Description>Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene.</Description>
</NDC>
<NDC>
<NDCCode>70710-1198-7</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (70710-1198-7) / 24 h in 1 POUCH (70710-1198-1) </PackageDescription>
<NDC11Code>70710-1198-07</NDC11Code>
<ProductNDC>70710-1198</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivastigmine</ProprietaryName>
<NonProprietaryName>Rivastigmine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190306</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206318</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>RIVASTIGMINE</SubstanceName>
<StrengthNumber>13.3</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivastigmine transdermal system is an acetylcholinesterase inhibitor indicated for treatment of: 1 Mild, moderate, and severe dementia of the Alzheimer's type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson's disease (PD) (1.2).</IndicationAndUsage>
<Description>Rivastigmine transdermal system contains rivastigmine USP, a reversible cholinesterase inhibitor known chemically as (S)-3-[1-(dimethylamino)ethyl]phenyl ethylmethylcarbamate. It has an empirical formula of C14H22N2O2 as the base and a molecular weight of 250.34 g/mol (as the base). Rivastigmine is a viscous, clear, and colorless to yellow to very slightly brown liquid that is sparingly soluble in water and very soluble in ethanol, acetonitrile, n-octanol and ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 4.27. Rivastigmine transdermal system is for transdermal administration. The transdermal system is a four-layer laminate containing (1) a foam backing with adhesive layer, (2) a polyester film, (3) an adhesive matrix containing rivastigmine, and (4) a fluoropolymer coated polyester release liner (see Figure 1). The release liner is removed and discarded prior to use. Figure 1: Cross Section of the Rivastigmine Transdermal System. Layer 1: Copolymer foam backing with adhesive layer. Layer 2: Polyester Film. Layer 3: Adhesive Matrix. Layer 4: Fluoropolymer coated Release Liner (removed at time of use). The active component of the system is rivastigmine. The remaining components of the system (colloidal silicon dioxide, light mineral oil, polyisobutylene adhesive, copolymer foam and polyester film) are pharmacologically inactive. Additionally, rivastigmine transdermal system is printed with pharmaceutical grade brown ink which contains acrylic polymers, carbon black, ethoxylated 2,4,7,9-tetramethyl 5 decyn-4,7-diol, iron oxide, octylphenoxypolyethoxyethanol, polyethylene glycol, polyethylene wax and polytetrafluoroethylene.</Description>
</NDC>
<NDC>
<NDCCode>70710-1204-7</NDCCode>
<PackageDescription>14 CAPSULE, DELAYED RELEASE in 1 BOTTLE (70710-1204-7) </PackageDescription>
<NDC11Code>70710-1204-07</NDC11Code>
<ProductNDC>70710-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dimethyl Fumarate</ProprietaryName>
<NonProprietaryName>Dimethyl Fumarate</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200928</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210538</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>DIMETHYL FUMARATE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200928</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Dimethyl fumarate is indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults.</IndicationAndUsage>
<Description>Dimethyl fumarate delayed-release capsules contain dimethyl fumarate which is also known by its chemical name, dimethyl (E) butenedioate, (C6H8O4). It has the following structure. Dimethyl fumarate is a white to off-white powder that is soluble in methanol and slightly soluble in water with a molecular mass of 144.13. Each dimethyl fumarate delayed-release capsule intended for oral administration contains 120 mg or 240 mg dimethyl fumarate respectively and contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferric oxide red, ferric oxide yellow, microcrystalline cellulose, magnesium stearate, methacrylic acid copolymer (Type A), methacrylic acid copolymer dispersion (Type C), mono and di-glycerides, povidone, polysorbate 80, sodium lauryl sulphate, talc and triethyl citrate. The capsule shell contains following inactive ingredients: D&C Yellow#10, FD&C Blue#1, FD&C Red#40, gelatin and titanium dioxide. The capsule shell is imprinted with black pharmaceutical ink and contains the following inactive ingredients: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>70710-1302-7</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 POUCH (70710-1302-7) / 6 SUPPOSITORY in 1 BLISTER PACK (70710-1302-6) </PackageDescription>
<NDC11Code>70710-1302-07</NDC11Code>
<ProductNDC>70710-1302</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesalamine</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20200214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208953</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesalamine is an aminosalicylate indicated in adults for the treatment of mildly to moderately active ulcerative proctitis.</IndicationAndUsage>
<Description>The active ingredient in Mesalamine suppositories, USP 1000 mg is mesalamine, also known as mesalazine or 5-aminosalicylic acid (5-ASA). Chemically, mesalamine is 5-amino-2-hydroxybenzoic acid, and is classified as an aminosalicylate. Each Mesalamine suppository, USP contains 1000 mg of mesalamine, USP (micronized) in a base of hard fat. Mesalamine, USP (micronized) are light tan to pink colored, needle-shaped crystals. Color may darken on exposure to air. It is odorless or may have a slight characteristic odor. It is slightly soluble in water; very slightly soluble in methanol, in dehydrated alcohol, and in acetone; practically insoluble in n-butyl alcohol, in chloroform, in ether, in ethyl acetate, in n-hexane, in methylene chloride, and in n-propyl alcohol; soluble in dilute hydrochloric acid and in dilute alkali hydroxides. The molecular formula is C7H7NO3, representing a molecular weight of 153.14. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>70710-1397-7</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (70710-1397-7) </PackageDescription>
<NDC11Code>70710-1397-07</NDC11Code>
<ProductNDC>70710-1397</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eltrombopag</ProprietaryName>
<NonProprietaryName>Eltrombopag</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216281</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ELTROMBOPAG OLAMINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Increased Megakaryocyte Maturation [PE], Increased Platelet Production [PE], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Thrombopoietin Receptor Agonist [EPC], Thrombopoietin Receptor Agonists [MoA], UGT1A1 Inhibitors [MoA], UGT1A3 Inhibitors [MoA], UGT1A4 Inhibitors [MoA], UGT1A6 Inhibitors [MoA], UGT1A9 Inhibitors [MoA], UGT2B15 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eltrombopag is a thrombopoietin receptor agonist indicated: 1 for the treatment of thrombocytopenia in adult and pediatric patients 1 year and older with persistent or chronic immune thrombocytopenia (ITP) who have had an insufficient response to corticosteroids, immunoglobulins or splenectomy. Eltrombopag should be used only in patients with ITP whose degree of thrombocytopenia and clinical condition increase the risk for bleeding. (1.1), 2 for the treatment of thrombocytopenia in patients with chronic hepatitis C to allow the initiation and maintenance of interferon-based therapy. Eltrombopag should be used only in patients with chronic hepatitis C whose degree of thrombocytopenia prevents the initiation of interferon-based therapy or limits the ability to maintain interferon-based therapy. (1.2), 3 in combination with standard immunosuppressive therapy for the first-line treatment of adult and pediatric patients 2 years and older with severe aplastic anemia. (1.3), 4 for the treatment of patients with severe aplastic anemia who have had an insufficient response to immunosuppressive therapy. (1.3).</IndicationAndUsage>
<Description>Eltrombopag tablets contain eltrombopag olamine, a small molecule thrombopoietin (TPO) receptor agonist for oral administration. Eltrombopag olamine is a biphenyl hydrazone. The chemical name for eltrombopag olamine is 3'-{(2Z)-2-[1-(3,4-dimethylphenyl)-3-methyl-5-oxo-1,5-dihydro-4H-pyrazol-4-ylidene]hydrazino}-2'-hydroxy-3-biphenylcarboxylic acid-2-aminoethanol (1:2). It has the molecular formula C25H22N4O4.2(C2H7NO). The molecular weight is 564.64 g/mol for eltrombopag olamine and 442.48 g/mol for eltrombopag free acid. Eltrombopag olamine has the following structural formula. Eltrombopag olamine is practically insoluble in aqueous buffer across a pH range of 1 to 7.5, very slightly soluble in water, slightly soluble in methanol and ethanol. Each film-coated tablets contain eltrombopag olamine equivalent to 12.5 mg, 25 mg, 50 mg or 75 mg of eltrombopag free acid and contains the following inactive ingredients: hypromellose, microcrystalline cellulose, polyethylene glycol, povidone (k-30), sodium starch glycolate, sodium stearyl fumarate, titanium dioxide and xylitol. Additionally, each 25 mg tablet contains iron oxide red and iron oxide yellow, each 50 mg tablet contains FD&C blue #2 Aluminum Lake and each 75 mg tablet contains ferrosoferric oxide and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>70710-1467-7</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (70710-1467-7) </PackageDescription>
<NDC11Code>70710-1467-07</NDC11Code>
<ProductNDC>70710-1467</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colestipol Hydrochloride</ProprietaryName>
<NonProprietaryName>Colestipol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215223</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>COLESTIPOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Since no drug is innocuous, strict attention should be paid to the indications and contraindications, particularly when selecting drugs for chronic long-term use. Colestipol hydrochloride tablets are indicated as adjunctive therapy to diet for the reduction of elevated serum total and LDL-C in patients with primary hypercholesterolemia (elevated LDL-C) who do not respond adequately to diet. Generally, colestipol hydrochloride tablets have no clinically significant effect on serum triglycerides, but with their use, triglyceride levels may be raised in some patients. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy (see NCEP guidelines). A minimum of six months of intensive dietary therapy and counseling should be carried out prior to initiation of drug therapy. Shorter periods may be considered in patients with severe elevations of LDL-C or with definite CHD. According to the NCEP guidelines, the goal of treatment is to lower LDL-C and LDL-C is to be used to initiate and assess treatment response. Only if LDL-C levels are not available, should the Total-C be used to monitor therapy. The NCEP treatment guidelines are shown below.</IndicationAndUsage>
<Description>The active ingredient in colestipol hydrochloride tablets is colestipol hydrochloride, which is a lipid lowering agent for oral use. Colestipol is an insoluble, high molecular weight basic anion-exchange copolymer of diethylenetriamine and 1-chloro-2,3-epoxpropane (hydrochloride), with approximately one out of five amine nitrogens protonated. It is a yellow to orange powder or beads water-insoluble resin which is hygroscopic and swells when suspended in water or aqueous fluids. Each colestipol hydrochloride tablet contains one gram of colestipol hydrochloride. Colestipol hydrochloride tablets are light yellow to yellow in color and are tasteless and odorless. Inactive ingredients: cellacefate, colloidal silicon dioxide, crospovidone, ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, povidone, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>70710-1477-7</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (70710-1477-7) > 1 PATCH in 1 POUCH (70710-1477-1) > 14 h in 1 PATCH</PackageDescription>
<NDC11Code>70710-1477-07</NDC11Code>
<ProductNDC>70710-1477</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin Transdermal System</ProprietaryName>
<NonProprietaryName>Nitroglycerin Transdermal System</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20180208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089885</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/h</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol, trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately 0.03 mg of nitroglycerin per hour. Thus, the 3.5-cm2 system delivers approximately 0.1 mg of nitroglycerin per hour. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 6% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises 3 layers as shown below. Proceeding from the visible surface towards the surface attached to the skin, these layers are: 1) a transparent outer backing layer composed of a composite plastic film and is printed with the name of the drug and strength; 2) nitroglycerin in acrylic-based polymer adhesive with a cross-linking agent; 3) a protective white, translucent peelable silicone treated polystyrene release liner which covers the second layer and must be removed-prior to use. The inactive ingredients are: multilayer plastic film (polyolefin/EVA/PVDC), silicone coated polystyrene film, acrylic adhesive with a cross-linking agent and blue ink. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>70710-1508-8</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (70710-1508-8) / 14 TABLET, FOR SUSPENSION in 1 BLISTER PACK (70710-1508-7) </PackageDescription>
<NDC11Code>70710-1508-08</NDC11Code>
<ProductNDC>70710-1508</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosentan</ProprietaryName>
<NonProprietaryName>Bosentan</NonProprietaryName>
<DosageFormName>TABLET, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213981</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BOSENTAN</SubstanceName>
<StrengthNumber>32</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bosentan tablets for oral suspension are indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1): 1 in adults to improve exercise ability and to decrease clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (60%), PAH associated with connective tissue diseases (21%) and PAH associated with congenital heart disease with left-to-right shunts (18%) [see Clinical Studies (14.1)] ., 2 in pediatric patients aged 3 years and older with idiopathic or congenital PAH to improve pulmonary vascular resistance (PVR), which is expected to result in an improvement in exercise ability.</IndicationAndUsage>
<Description>Bosentan tablets for oral suspension is an endothelin receptor antagonist that belongs to a class of highly substituted pyrimidine derivatives, with no chiral centers. It is designated chemically as 4-tert-butyl-N-[6-(2-hydroxy-ethoxy)-5-(2-methoxy-phenoxy)-[2,2´]-bipyrimidin -4-yl]-benzenesulfonamide monohydrate and has the following structural formula. Bosentan has a molecular weight of 569.63 and a molecular formula of C27H29N5O6S.H2O. Bosentan is a white to yellowish powder. It is soluble in acetonitrile, slightly soluble in methanol and practically insoluble in water. In the solid state, bosentan is very stable, is not hygroscopic and is not light sensitive. Bosentan is available as a 32 mg tablet for oral suspension and contains the following excipients: acesulfame potassium, aspartame, basic butylated methacrylate copolymer, colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, mannitol, sodium lauryl sulfate, stearic acid, talcum and tutti frutti flavor. Each dispersible tablet contains 2.08 mg of phenylalanine. Each dispersible tablet contains 33.045 mg of bosentan monohydrate, equivalent to 32 mg anhydrous bosentan.</Description>
</NDC>
<NDC>
<NDCCode>70710-1584-4</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (70710-1584-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1584-7) </PackageDescription>
<NDC11Code>70710-1584-04</NDC11Code>
<ProductNDC>70710-1584</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214501</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1585-4</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (70710-1585-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1585-7) </PackageDescription>
<NDC11Code>70710-1585-04</NDC11Code>
<ProductNDC>70710-1585</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214501</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1586-4</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (70710-1586-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1586-7) </PackageDescription>
<NDC11Code>70710-1586-04</NDC11Code>
<ProductNDC>70710-1586</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214501</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1587-4</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (70710-1587-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1587-7) </PackageDescription>
<NDC11Code>70710-1587-04</NDC11Code>
<ProductNDC>70710-1587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214501</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1588-4</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (70710-1588-4) / 1 TABLET, FILM COATED in 1 BLISTER PACK (70710-1588-7) </PackageDescription>
<NDC11Code>70710-1588-04</NDC11Code>
<ProductNDC>70710-1588</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214501</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam tablets are indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyl-tetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a almost white to creamish yellow powder. It is very soluble in ethanol and glacial acetic acid. It is freely soluble in buffer (pH 1.2, 4.5, and 7.4), acetonitrile, toluene, acetone and isopropyl acetate and soluble in water and methanol. It is slightly soluble in n-hexane and diisopropyl ether. Brivaracetam tablets are for oral administration and contain the following inactive ingredients: anhydrous lactose, croscarmellose sodium, glyceryl monocaprylocaprate type 1, lactose monohydrate, magnesium stearate, polyvinyl alcohol partially hydrolyzed, sodium lauryl sulfate, talc and titanium dioxide. Additionally, each 25 mg tablet contains FD&C blue #2 Aluminum Lake and FD&C red #40 Aluminum Lake; each 75 mg tablet contains FD&C blue #1 Aluminum Lake and D&C red #27 Aluminum Lake and each 100 mg tablet contains FD&C yellow #5 Aluminum Lake, FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70710-1589-7</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (70710-1589-7) </PackageDescription>
<NDC11Code>70710-1589-07</NDC11Code>
<ProductNDC>70710-1589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tofacitinib</ProprietaryName>
<NonProprietaryName>Tofacitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260605</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209829</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TOFACITINIB CITRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tofacitinib tablets are Janus kinase (JAK) inhibitors. Tofacitinib tablets are indicated for the treatment of adult patients with: 1 Moderately to severely active rheumatoid arthritis (RA),who have had an inadequate response or intolerance to one or more TNF blockers., 2 Active psoriatic arthritis (PsA),who have had an inadequate response or intolerance to one or more TNF blockers., 3 Active ankylosing spondylitis (AS),who have had an inadequate response or intolerance to one or more TNF blockers., 4 Moderately to severely active ulcerative colitis (UC),who have had an inadequate response or intolerance to one or more TNF blockers.</IndicationAndUsage>
<Description>Tofacitinib tablets are formulated with the citrate salt of tofacitinib, a JAK inhibitor. Tofacitinib citrate is a white to off-white powder and soluble in dimethylsulfoxide and. insoluble in water with the following chemical name: (3R,4R)-4-methyl-3-(methyl-7Hpyrrolo [2,3-d]pyrimidin-4-ylamino)-ß-oxo-1-piperidinepropanenitrile, 2-hydroxy-1,2,3- propanetricarboxylate (1:1). The solubility of tofacitinib citrate in water is 2.9 mg/mL. Tofacitinib citrate has a molecular weight of 504.5 Daltons (or 312.4 Daltons as the. tofacitinib free base) and a molecular formula of C16H20N6OC6H8O7. The chemical. structure of tofacitinib citrate is. Each 5 mg and 10 mg film-coated tablet contains tofacitinib equivalent to 8.08 mg and 16.15 mg of tofacitinib citrate respectively for oral administration and contains following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone and titanium dioxide. Additionally, each 10 mg tablet contains FD&C blue #1 Aluminum Lake and iron oxide yellow.</Description>
</NDC>
</NDCList>