{
"NDC": [
{
"NDCCode": "70748-132-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-132-06) ",
"NDC11Code": "70748-0132-06",
"ProductNDC": "70748-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190927",
"EndMarketingDate": "20240131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212051",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190927",
"EndMarketingDatePackage": "20240131",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablet is indicated for the treatment of erectile dysfunction.",
"Description": "Sildenafil tablets USP, an oral therapy for erectile dysfunction, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo[4,3- d]pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic, crystalline powder with a solubility of 4.904 mg/mL in water and a molecular weight of 666.7. Sildenafil tablets are formulated as white to off white, round, film coated tablets equivalent to 25 mg, 50 mg and 100 mg of sildenafil for oral administration. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: anhydrous dibasic calcium phosphate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "70748-132-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (70748-132-01) ",
"NDC11Code": "70748-0132-01",
"ProductNDC": "70748-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212051",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190927",
"SamplePackage": "N"
},
{
"NDCCode": "17511-132-06",
"PackageDescription": "25 kg in 1 DRUM (17511-132-06) ",
"NDC11Code": "17511-0132-06",
"ProductNDC": "17511-132",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20200714",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "COHANCE LIFESCIENCES LIMITED",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "480",
"StrengthUnit": "kg/480kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-31",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "14-JUL-20"
},
{
"NDCCode": "33261-132-06",
"PackageDescription": "6 TABLET in 1 BOTTLE, PLASTIC (33261-132-06)",
"NDC11Code": "33261-0132-06",
"ProductNDC": "33261-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110201",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days. (See DOSAGE AND ADMINISTRATION section.).",
"Description": "Phenazopyridine Hydrochloride is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch."
},
{
"NDCCode": "42794-132-06",
"PackageDescription": "1000 TABLET in 1 BOTTLE (42794-132-06) ",
"NDC11Code": "42794-0132-06",
"ProductNDC": "42794-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Liomny",
"NonProprietaryName": "Liothyronine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200295",
"LabelerName": "SIGMAPHARM LABORATORIES, LLC",
"SubstanceName": "LIOTHYRONINE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Triiodothyronine [CS], l-Triiodothyronine [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251121",
"SamplePackage": "N",
"IndicationAndUsage": "LIOMNY is an L-triiodothyronine (T3) indicated for: 1 Hypothyroidism: As replacement in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1.1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression: As an adjunct to surgery and radioiodine therapy in the management of well-differentiated thyroid cancer ( 1.2) , 3 Thyroid Suppression Test: As a diagnostic agent in suppression tests to differentiate suspected mild hyperthyroidism or thyroid gland autonomy ( 1.3) .",
"Description": "LIOMNY contains the active ingredient, liothyronine (L-triiodothyronine or LT3), a synthetic form of a thyroid hormone liothyronine in sodium salt form. It is chemically designated as L-Tyrosine, O-(4-hydroxy-3-iodophenyl)-3,5-diiodo-, monosodium salt. The molecular formula, molecular weight and structural formula of liothyronine sodium are given below. LIOMNY contains liothyronine sodium equivalent to liothyronine in 5 mcg, 25 mcg, and 50 mcg. Inactive ingredients consist of calcium sulfate dihydrate, corn starch, gelatin, magnesium stearate and mannitol."
},
{
"NDCCode": "55292-132-60",
"PackageDescription": "60 PACKAGE in 1 BOX (55292-132-60) / 6 AMPULE in 1 PACKAGE (55292-132-06) / 1 mL in 1 AMPULE (55292-132-01) ",
"NDC11Code": "55292-0132-60",
"ProductNDC": "55292-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Signifor",
"NonProprietaryName": "Pasireotide",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20121214",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200677",
"LabelerName": "Recordati Rare Diseases, Inc.",
"SubstanceName": "PASIREOTIDE",
"StrengthNumber": ".6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Somatostatin Analog [EPC], Somatostatin Receptor Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121214",
"SamplePackage": "N",
"IndicationAndUsage": "SIGNIFOR is a somatostatin analog indicated for the treatment of adult patients with Cushing's disease for whom pituitary surgery is not an option or has not been curative (1).",
"Description": "SIGNIFOR (pasireotide) injection is prepared as a sterile solution of pasireotide diaspartate in a tartaric acid buffer for administration by subcutaneous injection. SIGNIFOR is a somatostatin analog. Pasireotide diaspartate, chemically known as (2-Aminoethyl) carbamic acid (2R,5S,8S,11S,14R,17S,19aS)-11-(4-aminobutyl)-5-benzyl-8-(4-benzyloxybenzyl)-14-(1H-indol-3-ylmethyl)-4,7,10,13,16,19-hexaoxo-17-phenyloctadecahydro-3a,6,9,12,15,18-hexaazacyclopentacyclooctadecen-2-yl ester, di[(S)-2-aminosuccinic acid] salt, is a cyclohexapeptide with pharmacologic properties mimicking those of the natural hormone somatostatin. The molecular formula of pasireotide diaspartate is C58H66N10O9 2 C4H7NO4 and the molecular weight is 1313.41 g/mol. The structural formula is. SIGNIFOR is supplied as a sterile solution in a single-dose, 1 mL colorless glass ampule containing pasireotide in 0.3 mg/mL, 0.6 mg/mL, or 0.9 mg/mL strengths for subcutaneous injection. Each glass ampule contains."
},
{
"NDCCode": "58159-132-06",
"PackageDescription": "5 kg in 1 DRUM (58159-132-06) ",
"NDC11Code": "58159-0132-06",
"ProductNDC": "58159-132",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Progesterone",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250920",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "NURAY CHEMICALS PRIVATE LIMITED",
"SubstanceName": "PROGESTERONE",
"StrengthNumber": "35",
"StrengthUnit": "kg/35kg",
"Status": "Unfinished",
"LastUpdate": "2025-09-30",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20-SEP-25"
},
{
"NDCCode": "68382-132-06",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (68382-132-06) ",
"NDC11Code": "68382-0132-06",
"ProductNDC": "68382-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078225",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100427",
"SamplePackage": "N",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules are an alpha1 adrenoceptor antagonist indicated for treatment of the signs and symptoms of benign prostatic hyperplasia (1) . Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension (1).",
"Description": "Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride, USP is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is:. Each tamsulosin hydrochloride capsule intended for oral administration contains tamsulosin hydrochloride 0.4 mg. In addition, each capsule contains the following inactive ingredients: black iron oxide, D&C yellow # 10, FD&C blue # 1, FD&C red # 40, FD&C yellow # 6, gelatin, methacrylic acid copolymer dispersion, microcrystalline cellulose, polysorbate 80, talc, titanium dioxide, triacetin and yellow iron oxide. The capsule is printed with black pharmaceutical ink which contains black iron oxide as a coloring agent. The product meets USP Dissolution Test 8."
},
{
"NDCCode": "69367-132-06",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (69367-132-06) ",
"NDC11Code": "69367-0132-06",
"ProductNDC": "69367-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160401",
"EndMarketingDate": "20261201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204989",
"LabelerName": "Westminster Pharmaceuticals, LLC",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160401",
"EndMarketingDatePackage": "20261201",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin is indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&C Red 40, D&C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&C Yellow 10, and FD&C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide and coating agent contains hypromellose, titanium dioxide, polyethylene glycol and talc."
},
{
"NDCCode": "69729-132-06",
"PackageDescription": "3 PACKET in 1 CARTON (69729-132-06) / 2 TABLET, COATED in 1 PACKET",
"NDC11Code": "69729-0132-06",
"ProductNDC": "69729-132",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Buscapina",
"NonProprietaryName": "Acetaminophen, Caffeine, Pyrilamine Maleate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230904",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "OPMX LLC",
"SubstanceName": "PYRILAMINE MALEATE; ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "15; 500; 60",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"Status": "Active",
"LastUpdate": "2024-12-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230904",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of these symptoms associated with menstrual periods: 1 cramps, 2 bloating, 3 water-weight gain, 4 headache, 5 backache, 6 muscle aches, 7 fatigue."
},
{
"NDCCode": "69945-132-06",
"PackageDescription": "1 VIAL, GLASS in 1 CAN (69945-132-06) > .5 mL in 1 VIAL, GLASS",
"NDC11Code": "69945-0132-06",
"ProductNDC": "69945-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Indium In 111 Chloride",
"NonProprietaryName": "Indium In 111 Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20071207",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019841",
"LabelerName": "Curium US LLC",
"SubstanceName": "INDIUM CHLORIDE IN-111",
"StrengthNumber": "10",
"StrengthUnit": "mCi/mL",
"Status": "Deprecated",
"LastUpdate": "2024-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20071207",
"SamplePackage": "N",
"IndicationAndUsage": "Indium In 111 Chloride Sterile Solution is indicated for radiolabeling ProstaScint preparations used for in vivo diagnostic imaging procedures. It is also indicated for radiolabeling Zevalin preparations used for Radioimmunotherapy procedures. Please refer to the package insert for ProstaScint or Zevalin for information on the final drug product.",
"Description": "Indium In 111 Chloride Sterile Solution is indicated for radiolabeling ProstaScint preparations used for in vivo diagnostic imaging procedures. It is also indicated for radiolabeling Zevalin preparations used for Radioimmunotherapy procedures. It is supplied as a sterile, non-pyrogenic solution of Indium In 111 Chloride in 0.05 molar hydrochloric acid. No carrier has been added to the solution. Each 0.5 milliliter of the solution contains 185 megabequerels (5 millicuries) of Indium In 111 Chloride at time of calibration (specific activity of >1.85 GBq/μg Indium; >50 mCi/μg Indium at this time of calibration). The solution pH is 1.1 to 1.4."
},
{
"NDCCode": "71093-132-06",
"PackageDescription": "1000 TABLET in 1 BOTTLE, PLASTIC (71093-132-06) ",
"NDC11Code": "71093-0132-06",
"ProductNDC": "71093-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203769",
"LabelerName": "ACI Healthcare USA, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2020-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180115",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride is a white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene hydrochloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin Hydrochloride Tablets contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 662.88 mg, 779.86 mg metformin base, respectively. Each tablet contains the inactive ingredients pregelatinized starch (maize), povidone, crospovidone, magnesium stearate. In addition, the coating for the tablets contains Hypromellose, polyethylene glycol, titanium dioxide and flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol and silicon dioxide."
},
{
"NDCCode": "71894-132-06",
"PackageDescription": "1 KIT in 1 CARTON (71894-132-06) * 8.3 mL in 1 VIAL (71894-115-01) * 1 mL in 1 POUCH",
"NDC11Code": "71894-0132-06",
"ProductNDC": "71894-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolgensma",
"NonProprietaryName": "Onasemnogene Abeparvovec-xioi",
"DosageFormName": "KIT",
"StartMarketingDate": "20190524",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125694",
"LabelerName": "Novartis Innovative Technologies Inc.",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190524",
"SamplePackage": "N",
"IndicationAndUsage": "ZOLGENSMA is an adeno-associated virus (AAV) vector-based gene therapy indicated for the treatment of pediatric patients less than 2 years of age with spinal muscular atrophy (SMA) with bi-allelic mutations in the survival motor neuron 1 (SMN1) gene. Limitations of Use: 1 The safety and effectiveness of repeat administration of ZOLGENSMA have not been evaluated [see Adverse Reactions (6.2)]. , 2 The use of ZOLGENSMA in patients with advanced SMA (e.g., complete paralysis of limbs, permanent ventilator-dependence) has not been evaluated [see Clinical Studies (14)].",
"Description": "ZOLGENSMA is a suspension of an adeno-associated viral vector-based gene therapy for intravenous infusion. It is a recombinant self-complementary AAV9 containing a transgene encoding the human survival motor neuron (SMN) protein, under the control of a cytomegalovirus enhancer/chicken-β-actin hybrid promoter. ZOLGENSMA has a nominal concentration of 2.0 × 1013 vg/mL. Each vial contains an extractable volume of not less than either 5.5 mL or 8.3 mL and the excipients 20 mM Tris (pH 8.0), 1 mM magnesium chloride (MgCl2), 200 mM sodium chloride (NaCl) and 0.005% poloxamer 188. ZOLGENSMA is packaged as a sterile suspension and contains no preservative."
},
{
"NDCCode": "83589-132-06",
"PackageDescription": "1 g in 1 VIAL (83589-132-06) ",
"NDC11Code": "83589-0132-06",
"ProductNDC": "83589-132",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Larazotide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20260208",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Nanjing Chengong Pharmaceutical Co., Ltd.",
"SubstanceName": "LARAZOTIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "08-FEB-26"
},
{
"NDCCode": "70748-101-06",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-101-06) ",
"NDC11Code": "70748-0101-06",
"ProductNDC": "70748-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"NonProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260417",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211579",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260417",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.",
"Description": "Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake."
},
{
"NDCCode": "70748-103-06",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-103-06) ",
"NDC11Code": "70748-0103-06",
"ProductNDC": "70748-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"NonProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260417",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211579",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "10; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260417",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.",
"Description": "Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake."
},
{
"NDCCode": "70748-104-06",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-104-06) ",
"NDC11Code": "70748-0104-06",
"ProductNDC": "70748-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"NonProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260417",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211579",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "10; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260417",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.",
"Description": "Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake."
},
{
"NDCCode": "70748-105-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (70748-105-06) ",
"NDC11Code": "70748-0105-06",
"ProductNDC": "70748-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin",
"NonProprietaryName": "Dapagliflozin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211531",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260408",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin is indicated: : 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established cardiovascular (CV) disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the molecular weight is 408.88. The structural formula is. Dapagliflozin tablets USP are available as a film-coated tablet for oral administration containing 5 mg dapagliflozin or 10 mg dapagliflozin, and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone, and sodium stearyl fumarate. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "70748-106-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (70748-106-06) ",
"NDC11Code": "70748-0106-06",
"ProductNDC": "70748-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin",
"NonProprietaryName": "Dapagliflozin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211531",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260408",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin is indicated: : 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established cardiovascular (CV) disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the molecular weight is 408.88. The structural formula is. Dapagliflozin tablets USP are available as a film-coated tablet for oral administration containing 5 mg dapagliflozin or 10 mg dapagliflozin, and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone, and sodium stearyl fumarate. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "70748-129-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-129-06) ",
"NDC11Code": "70748-0129-06",
"ProductNDC": "70748-129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leflunomide",
"NonProprietaryName": "Leflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211863",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LEFLUNOMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200831",
"SamplePackage": "N",
"IndicationAndUsage": "Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).",
"Description": "Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only)."
},
{
"NDCCode": "70748-130-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-130-06) ",
"NDC11Code": "70748-0130-06",
"ProductNDC": "70748-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leflunomide",
"NonProprietaryName": "Leflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211863",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LEFLUNOMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200831",
"SamplePackage": "N",
"IndicationAndUsage": "Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).",
"Description": "Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only)."
},
{
"NDCCode": "70748-131-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-131-06) ",
"NDC11Code": "70748-0131-06",
"ProductNDC": "70748-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212051",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190927",
"SamplePackage": "N"
},
{
"NDCCode": "70748-133-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-133-06) ",
"NDC11Code": "70748-0133-06",
"ProductNDC": "70748-133",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190927",
"EndMarketingDate": "20240131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212051",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190927",
"EndMarketingDatePackage": "20240131",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablet is indicated for the treatment of erectile dysfunction.",
"Description": "Sildenafil tablets USP, an oral therapy for erectile dysfunction, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo[4,3- d]pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic, crystalline powder with a solubility of 4.904 mg/mL in water and a molecular weight of 666.7. Sildenafil tablets are formulated as white to off white, round, film coated tablets equivalent to 25 mg, 50 mg and 100 mg of sildenafil for oral administration. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: anhydrous dibasic calcium phosphate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "70748-211-06",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-211-06) / 30 TABLET in 1 BOTTLE",
"NDC11Code": "70748-0211-06",
"ProductNDC": "70748-211",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dasatinib",
"NonProprietaryName": "Dasatinib",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214350",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DASATINIB",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.",
"Description": "Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide."
},
{
"NDCCode": "70748-212-06",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-212-06) / 30 TABLET in 1 BOTTLE",
"NDC11Code": "70748-0212-06",
"ProductNDC": "70748-212",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dasatinib",
"NonProprietaryName": "Dasatinib",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214350",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DASATINIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.",
"Description": "Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide."
},
{
"NDCCode": "70748-213-06",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-213-06) / 30 TABLET in 1 BOTTLE",
"NDC11Code": "70748-0213-06",
"ProductNDC": "70748-213",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dasatinib",
"NonProprietaryName": "Dasatinib",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214350",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DASATINIB",
"StrengthNumber": "140",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.",
"Description": "Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide."
},
{
"NDCCode": "70748-236-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (70748-236-06) ",
"NDC11Code": "70748-0236-06",
"ProductNDC": "70748-236",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azilsartan Medoxomil",
"NonProprietaryName": "Azilsartan Medoxomil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214489",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "AZILSARTAN KAMEDOXOMIL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Blocker [EPC], Angiotensin 2 Type 1 Receptor Antagonists [MoA], Decreased Blood Pressure [PE]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260514",
"SamplePackage": "N",
"IndicationAndUsage": "Azilsartan medoxomil tablets are indicated for the treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with azilsartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality and it can be concluded that it is blood pressure reduction and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia) and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure or diabetic kidney disease). These considerations may guide selection of therapy. Azilsartan medoxomil tablets may be used alone or in combination with other antihypertensive agents.",
"Description": "Azilsartan medoxomil, a prodrug, is hydrolyzed to azilsartan in the gastrointestinal tract during absorption. Azilsartan is an angiotensin II receptor blocker. The drug substance used in the drug product formulation is the potassium salt of azilsartan medoxomil, also known by the US accepted name of azilsartan kamedoxomil and is chemically described as (5-Methyl-2-oxo-1,3-dioxol-4-yl)methyl 2-ethoxy-1-{[2'-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)biphenyl-4-yl]methyl}-1H-benzimidazole-7-carboxylate mono potassium salt. Its empirical formula is C30H23KN4O8 and its structural formula is. Azilsartan kamedoxomil is a white to off-white colored powder with a molecular weight of 606.62. It is practically insoluble in water, sparingly soluble in methanol; and soluble in N, N-Dimethylformamide. Azilsartan medoxomil is available for oral use as tablets. The tablets have a characteristic odor. Each azilsartan medoxomil tablet contains 42.68 or 85.36 mg of azilsartan kamedoxomil, which is equivalent to containing 40 mg or 80 mg respectively, of azilsartan medoxomil and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose and vanillin."
},
{
"NDCCode": "70748-237-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (70748-237-06) ",
"NDC11Code": "70748-0237-06",
"ProductNDC": "70748-237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azilsartan Medoxomil",
"NonProprietaryName": "Azilsartan Medoxomil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214489",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "AZILSARTAN KAMEDOXOMIL",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Blocker [EPC], Angiotensin 2 Type 1 Receptor Antagonists [MoA], Decreased Blood Pressure [PE]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260514",
"SamplePackage": "N",
"IndicationAndUsage": "Azilsartan medoxomil tablets are indicated for the treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with azilsartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality and it can be concluded that it is blood pressure reduction and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia) and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure or diabetic kidney disease). These considerations may guide selection of therapy. Azilsartan medoxomil tablets may be used alone or in combination with other antihypertensive agents.",
"Description": "Azilsartan medoxomil, a prodrug, is hydrolyzed to azilsartan in the gastrointestinal tract during absorption. Azilsartan is an angiotensin II receptor blocker. The drug substance used in the drug product formulation is the potassium salt of azilsartan medoxomil, also known by the US accepted name of azilsartan kamedoxomil and is chemically described as (5-Methyl-2-oxo-1,3-dioxol-4-yl)methyl 2-ethoxy-1-{[2'-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)biphenyl-4-yl]methyl}-1H-benzimidazole-7-carboxylate mono potassium salt. Its empirical formula is C30H23KN4O8 and its structural formula is. Azilsartan kamedoxomil is a white to off-white colored powder with a molecular weight of 606.62. It is practically insoluble in water, sparingly soluble in methanol; and soluble in N, N-Dimethylformamide. Azilsartan medoxomil is available for oral use as tablets. The tablets have a characteristic odor. Each azilsartan medoxomil tablet contains 42.68 or 85.36 mg of azilsartan kamedoxomil, which is equivalent to containing 40 mg or 80 mg respectively, of azilsartan medoxomil and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose and vanillin."
},
{
"NDCCode": "70748-238-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (70748-238-06) ",
"NDC11Code": "70748-0238-06",
"ProductNDC": "70748-238",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216063",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "TOLVAPTAN",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vasopressin V2 Receptor Antagonist [EPC], Vasopressin V2 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).",
"Description": "Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide."
},
{
"NDCCode": "70748-239-06",
"PackageDescription": "30 TABLET in 1 BOTTLE (70748-239-06) ",
"NDC11Code": "70748-0239-06",
"ProductNDC": "70748-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216063",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "TOLVAPTAN",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vasopressin V2 Receptor Antagonist [EPC], Vasopressin V2 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).",
"Description": "Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70748-132-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-132-06) </PackageDescription>
<NDC11Code>70748-0132-06</NDC11Code>
<ProductNDC>70748-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190927</StartMarketingDate>
<EndMarketingDate>20240131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212051</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190927</StartMarketingDatePackage>
<EndMarketingDatePackage>20240131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablet is indicated for the treatment of erectile dysfunction.</IndicationAndUsage>
<Description>Sildenafil tablets USP, an oral therapy for erectile dysfunction, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo[4,3- d]pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic, crystalline powder with a solubility of 4.904 mg/mL in water and a molecular weight of 666.7. Sildenafil tablets are formulated as white to off white, round, film coated tablets equivalent to 25 mg, 50 mg and 100 mg of sildenafil for oral administration. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: anhydrous dibasic calcium phosphate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-132-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (70748-132-01) </PackageDescription>
<NDC11Code>70748-0132-01</NDC11Code>
<ProductNDC>70748-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212051</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>17511-132-06</NDCCode>
<PackageDescription>25 kg in 1 DRUM (17511-132-06) </PackageDescription>
<NDC11Code>17511-0132-06</NDC11Code>
<ProductNDC>17511-132</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20200714</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>COHANCE LIFESCIENCES LIMITED</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>480</StrengthNumber>
<StrengthUnit>kg/480kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-31</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>14-JUL-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>33261-132-06</NDCCode>
<PackageDescription>6 TABLET in 1 BOTTLE, PLASTIC (33261-132-06)</PackageDescription>
<NDC11Code>33261-0132-06</NDC11Code>
<ProductNDC>33261-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110201</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days. (See DOSAGE AND ADMINISTRATION section.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>42794-132-06</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (42794-132-06) </PackageDescription>
<NDC11Code>42794-0132-06</NDC11Code>
<ProductNDC>42794-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Liomny</ProprietaryName>
<NonProprietaryName>Liothyronine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200295</ApplicationNumber>
<LabelerName>SIGMAPHARM LABORATORIES, LLC</LabelerName>
<SubstanceName>LIOTHYRONINE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Triiodothyronine [CS], l-Triiodothyronine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIOMNY is an L-triiodothyronine (T3) indicated for: 1 Hypothyroidism: As replacement in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism ( 1.1) , 2 Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression: As an adjunct to surgery and radioiodine therapy in the management of well-differentiated thyroid cancer ( 1.2) , 3 Thyroid Suppression Test: As a diagnostic agent in suppression tests to differentiate suspected mild hyperthyroidism or thyroid gland autonomy ( 1.3) .</IndicationAndUsage>
<Description>LIOMNY contains the active ingredient, liothyronine (L-triiodothyronine or LT3), a synthetic form of a thyroid hormone liothyronine in sodium salt form. It is chemically designated as L-Tyrosine, O-(4-hydroxy-3-iodophenyl)-3,5-diiodo-, monosodium salt. The molecular formula, molecular weight and structural formula of liothyronine sodium are given below. LIOMNY contains liothyronine sodium equivalent to liothyronine in 5 mcg, 25 mcg, and 50 mcg. Inactive ingredients consist of calcium sulfate dihydrate, corn starch, gelatin, magnesium stearate and mannitol.</Description>
</NDC>
<NDC>
<NDCCode>55292-132-60</NDCCode>
<PackageDescription>60 PACKAGE in 1 BOX (55292-132-60) / 6 AMPULE in 1 PACKAGE (55292-132-06) / 1 mL in 1 AMPULE (55292-132-01) </PackageDescription>
<NDC11Code>55292-0132-60</NDC11Code>
<ProductNDC>55292-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Signifor</ProprietaryName>
<NonProprietaryName>Pasireotide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20121214</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200677</ApplicationNumber>
<LabelerName>Recordati Rare Diseases, Inc.</LabelerName>
<SubstanceName>PASIREOTIDE</SubstanceName>
<StrengthNumber>.6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Somatostatin Analog [EPC], Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SIGNIFOR is a somatostatin analog indicated for the treatment of adult patients with Cushing's disease for whom pituitary surgery is not an option or has not been curative (1).</IndicationAndUsage>
<Description>SIGNIFOR (pasireotide) injection is prepared as a sterile solution of pasireotide diaspartate in a tartaric acid buffer for administration by subcutaneous injection. SIGNIFOR is a somatostatin analog. Pasireotide diaspartate, chemically known as (2-Aminoethyl) carbamic acid (2R,5S,8S,11S,14R,17S,19aS)-11-(4-aminobutyl)-5-benzyl-8-(4-benzyloxybenzyl)-14-(1H-indol-3-ylmethyl)-4,7,10,13,16,19-hexaoxo-17-phenyloctadecahydro-3a,6,9,12,15,18-hexaazacyclopentacyclooctadecen-2-yl ester, di[(S)-2-aminosuccinic acid] salt, is a cyclohexapeptide with pharmacologic properties mimicking those of the natural hormone somatostatin. The molecular formula of pasireotide diaspartate is C58H66N10O9 2 C4H7NO4 and the molecular weight is 1313.41 g/mol. The structural formula is. SIGNIFOR is supplied as a sterile solution in a single-dose, 1 mL colorless glass ampule containing pasireotide in 0.3 mg/mL, 0.6 mg/mL, or 0.9 mg/mL strengths for subcutaneous injection. Each glass ampule contains.</Description>
</NDC>
<NDC>
<NDCCode>58159-132-06</NDCCode>
<PackageDescription>5 kg in 1 DRUM (58159-132-06) </PackageDescription>
<NDC11Code>58159-0132-06</NDC11Code>
<ProductNDC>58159-132</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Progesterone</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250920</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>NURAY CHEMICALS PRIVATE LIMITED</LabelerName>
<SubstanceName>PROGESTERONE</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>kg/35kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-09-30</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20-SEP-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>68382-132-06</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (68382-132-06) </PackageDescription>
<NDC11Code>68382-0132-06</NDC11Code>
<ProductNDC>68382-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078225</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tamsulosin hydrochloride capsules are an alpha1 adrenoceptor antagonist indicated for treatment of the signs and symptoms of benign prostatic hyperplasia (1) . Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension (1).</IndicationAndUsage>
<Description>Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate. Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride, USP is a white crystalline powder that melts with decomposition at approximately 230°C. It is sparingly soluble in water and methanol, slightly soluble in glacial acetic acid and ethanol, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is:. Each tamsulosin hydrochloride capsule intended for oral administration contains tamsulosin hydrochloride 0.4 mg. In addition, each capsule contains the following inactive ingredients: black iron oxide, D&C yellow # 10, FD&C blue # 1, FD&C red # 40, FD&C yellow # 6, gelatin, methacrylic acid copolymer dispersion, microcrystalline cellulose, polysorbate 80, talc, titanium dioxide, triacetin and yellow iron oxide. The capsule is printed with black pharmaceutical ink which contains black iron oxide as a coloring agent. The product meets USP Dissolution Test 8.</Description>
</NDC>
<NDC>
<NDCCode>69367-132-06</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (69367-132-06) </PackageDescription>
<NDC11Code>69367-0132-06</NDC11Code>
<ProductNDC>69367-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160401</StartMarketingDate>
<EndMarketingDate>20261201</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204989</ApplicationNumber>
<LabelerName>Westminster Pharmaceuticals, LLC</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160401</StartMarketingDatePackage>
<EndMarketingDatePackage>20261201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin is indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin capsules and tablets, USP is gabapentin, which has the chemical name 1-(aminomethyl) cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 4.72±0.10 and a pKa2 of 10.27±0.29. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient is -1.083±0.235 at 25°C temperature. Each gabapentin capsule contains 100 mg, 300 mg or 400 mg of gabapentin, USP and the following inactive ingredients: pregelatinized starch (maize), and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate (SLS) and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, FD&C Red 40, D&C Yellow 10, and sodium lauryl sulfate (SLS). The 400mg capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate (SLS), D&C Yellow 10, and FD&C Red 40. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin, USP and the following inactive ingredients: poloxamer 407, mannitol, magnesium stearate, hydroxypropyl cellulose, talc, copovidone, crospovidone, colloidal silicon dioxide and coating agent contains hypromellose, titanium dioxide, polyethylene glycol and talc.</Description>
</NDC>
<NDC>
<NDCCode>69729-132-06</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (69729-132-06) / 2 TABLET, COATED in 1 PACKET</PackageDescription>
<NDC11Code>69729-0132-06</NDC11Code>
<ProductNDC>69729-132</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Buscapina</ProprietaryName>
<NonProprietaryName>Acetaminophen, Caffeine, Pyrilamine Maleate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230904</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>OPMX LLC</LabelerName>
<SubstanceName>PYRILAMINE MALEATE; ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>15; 500; 60</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of these symptoms associated with menstrual periods: 1 cramps, 2 bloating, 3 water-weight gain, 4 headache, 5 backache, 6 muscle aches, 7 fatigue.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69945-132-06</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CAN (69945-132-06) > .5 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>69945-0132-06</NDC11Code>
<ProductNDC>69945-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Indium In 111 Chloride</ProprietaryName>
<NonProprietaryName>Indium In 111 Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20071207</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019841</ApplicationNumber>
<LabelerName>Curium US LLC</LabelerName>
<SubstanceName>INDIUM CHLORIDE IN-111</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mCi/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indium In 111 Chloride Sterile Solution is indicated for radiolabeling ProstaScint preparations used for in vivo diagnostic imaging procedures. It is also indicated for radiolabeling Zevalin preparations used for Radioimmunotherapy procedures. Please refer to the package insert for ProstaScint or Zevalin for information on the final drug product.</IndicationAndUsage>
<Description>Indium In 111 Chloride Sterile Solution is indicated for radiolabeling ProstaScint preparations used for in vivo diagnostic imaging procedures. It is also indicated for radiolabeling Zevalin preparations used for Radioimmunotherapy procedures. It is supplied as a sterile, non-pyrogenic solution of Indium In 111 Chloride in 0.05 molar hydrochloric acid. No carrier has been added to the solution. Each 0.5 milliliter of the solution contains 185 megabequerels (5 millicuries) of Indium In 111 Chloride at time of calibration (specific activity of >1.85 GBq/μg Indium; >50 mCi/μg Indium at this time of calibration). The solution pH is 1.1 to 1.4.</Description>
</NDC>
<NDC>
<NDCCode>71093-132-06</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (71093-132-06) </PackageDescription>
<NDC11Code>71093-0132-06</NDC11Code>
<ProductNDC>71093-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203769</ApplicationNumber>
<LabelerName>ACI Healthcare USA, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride is a white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene hydrochloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin Hydrochloride Tablets contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 662.88 mg, 779.86 mg metformin base, respectively. Each tablet contains the inactive ingredients pregelatinized starch (maize), povidone, crospovidone, magnesium stearate. In addition, the coating for the tablets contains Hypromellose, polyethylene glycol, titanium dioxide and flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol and silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71894-132-06</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (71894-132-06) * 8.3 mL in 1 VIAL (71894-115-01) * 1 mL in 1 POUCH</PackageDescription>
<NDC11Code>71894-0132-06</NDC11Code>
<ProductNDC>71894-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolgensma</ProprietaryName>
<NonProprietaryName>Onasemnogene Abeparvovec-xioi</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20190524</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125694</ApplicationNumber>
<LabelerName>Novartis Innovative Technologies Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOLGENSMA is an adeno-associated virus (AAV) vector-based gene therapy indicated for the treatment of pediatric patients less than 2 years of age with spinal muscular atrophy (SMA) with bi-allelic mutations in the survival motor neuron 1 (SMN1) gene. Limitations of Use: 1 The safety and effectiveness of repeat administration of ZOLGENSMA have not been evaluated [see Adverse Reactions (6.2)]. , 2 The use of ZOLGENSMA in patients with advanced SMA (e.g., complete paralysis of limbs, permanent ventilator-dependence) has not been evaluated [see Clinical Studies (14)].</IndicationAndUsage>
<Description>ZOLGENSMA is a suspension of an adeno-associated viral vector-based gene therapy for intravenous infusion. It is a recombinant self-complementary AAV9 containing a transgene encoding the human survival motor neuron (SMN) protein, under the control of a cytomegalovirus enhancer/chicken-β-actin hybrid promoter. ZOLGENSMA has a nominal concentration of 2.0 × 1013 vg/mL. Each vial contains an extractable volume of not less than either 5.5 mL or 8.3 mL and the excipients 20 mM Tris (pH 8.0), 1 mM magnesium chloride (MgCl2), 200 mM sodium chloride (NaCl) and 0.005% poloxamer 188. ZOLGENSMA is packaged as a sterile suspension and contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>83589-132-06</NDCCode>
<PackageDescription>1 g in 1 VIAL (83589-132-06) </PackageDescription>
<NDC11Code>83589-0132-06</NDC11Code>
<ProductNDC>83589-132</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Larazotide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20260208</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Nanjing Chengong Pharmaceutical Co., Ltd.</LabelerName>
<SubstanceName>LARAZOTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>08-FEB-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70748-101-06</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-101-06) </PackageDescription>
<NDC11Code>70748-0101-06</NDC11Code>
<ProductNDC>70748-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Dapagliflozin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260417</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211579</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.</IndicationAndUsage>
<Description>Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70748-103-06</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-103-06) </PackageDescription>
<NDC11Code>70748-0103-06</NDC11Code>
<ProductNDC>70748-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Dapagliflozin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260417</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211579</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.</IndicationAndUsage>
<Description>Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70748-104-06</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-104-06) </PackageDescription>
<NDC11Code>70748-0104-06</NDC11Code>
<ProductNDC>70748-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Dapagliflozin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260417</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211579</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.</IndicationAndUsage>
<Description>Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70748-105-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70748-105-06) </PackageDescription>
<NDC11Code>70748-0105-06</NDC11Code>
<ProductNDC>70748-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin</ProprietaryName>
<NonProprietaryName>Dapagliflozin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211531</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin is indicated: : 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established cardiovascular (CV) disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the molecular weight is 408.88. The structural formula is. Dapagliflozin tablets USP are available as a film-coated tablet for oral administration containing 5 mg dapagliflozin or 10 mg dapagliflozin, and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone, and sodium stearyl fumarate. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-106-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70748-106-06) </PackageDescription>
<NDC11Code>70748-0106-06</NDC11Code>
<ProductNDC>70748-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin</ProprietaryName>
<NonProprietaryName>Dapagliflozin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211531</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin is indicated: : 1 To reduce the risk of hospitalization for heart failure in adults with type 2 diabetes mellitus and either established cardiovascular (CV) disease or multiple CV risk factors., 2 As an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Dapagliflozin, an inhibitor of SGLT2, is described chemically as (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the molecular weight is 408.88. The structural formula is. Dapagliflozin tablets USP are available as a film-coated tablet for oral administration containing 5 mg dapagliflozin or 10 mg dapagliflozin, and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose anhydrous, microcrystalline cellulose, povidone, and sodium stearyl fumarate. In addition, the film coating contains the following inactive ingredients: polyethylene glycol, polyvinyl alcohol, talc, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-129-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-129-06) </PackageDescription>
<NDC11Code>70748-0129-06</NDC11Code>
<ProductNDC>70748-129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leflunomide</ProprietaryName>
<NonProprietaryName>Leflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211863</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEFLUNOMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).</IndicationAndUsage>
<Description>Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only).</Description>
</NDC>
<NDC>
<NDCCode>70748-130-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-130-06) </PackageDescription>
<NDC11Code>70748-0130-06</NDC11Code>
<ProductNDC>70748-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leflunomide</ProprietaryName>
<NonProprietaryName>Leflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211863</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEFLUNOMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).</IndicationAndUsage>
<Description>Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only).</Description>
</NDC>
<NDC>
<NDCCode>70748-131-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-131-06) </PackageDescription>
<NDC11Code>70748-0131-06</NDC11Code>
<ProductNDC>70748-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212051</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70748-133-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-133-06) </PackageDescription>
<NDC11Code>70748-0133-06</NDC11Code>
<ProductNDC>70748-133</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190927</StartMarketingDate>
<EndMarketingDate>20240131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212051</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190927</StartMarketingDatePackage>
<EndMarketingDatePackage>20240131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablet is indicated for the treatment of erectile dysfunction.</IndicationAndUsage>
<Description>Sildenafil tablets USP, an oral therapy for erectile dysfunction, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo[4,3- d]pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic, crystalline powder with a solubility of 4.904 mg/mL in water and a molecular weight of 666.7. Sildenafil tablets are formulated as white to off white, round, film coated tablets equivalent to 25 mg, 50 mg and 100 mg of sildenafil for oral administration. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: anhydrous dibasic calcium phosphate, colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-211-06</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-211-06) / 30 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0211-06</NDC11Code>
<ProductNDC>70748-211</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dasatinib</ProprietaryName>
<NonProprietaryName>Dasatinib</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214350</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DASATINIB</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.</IndicationAndUsage>
<Description>Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-212-06</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-212-06) / 30 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0212-06</NDC11Code>
<ProductNDC>70748-212</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dasatinib</ProprietaryName>
<NonProprietaryName>Dasatinib</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214350</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DASATINIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.</IndicationAndUsage>
<Description>Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-213-06</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-213-06) / 30 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0213-06</NDC11Code>
<ProductNDC>70748-213</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dasatinib</ProprietaryName>
<NonProprietaryName>Dasatinib</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214350</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DASATINIB</SubstanceName>
<StrengthNumber>140</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.</IndicationAndUsage>
<Description>Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-236-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70748-236-06) </PackageDescription>
<NDC11Code>70748-0236-06</NDC11Code>
<ProductNDC>70748-236</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azilsartan Medoxomil</ProprietaryName>
<NonProprietaryName>Azilsartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214489</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AZILSARTAN KAMEDOXOMIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Blocker [EPC], Angiotensin 2 Type 1 Receptor Antagonists [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azilsartan medoxomil tablets are indicated for the treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with azilsartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality and it can be concluded that it is blood pressure reduction and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia) and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure or diabetic kidney disease). These considerations may guide selection of therapy. Azilsartan medoxomil tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Azilsartan medoxomil, a prodrug, is hydrolyzed to azilsartan in the gastrointestinal tract during absorption. Azilsartan is an angiotensin II receptor blocker. The drug substance used in the drug product formulation is the potassium salt of azilsartan medoxomil, also known by the US accepted name of azilsartan kamedoxomil and is chemically described as (5-Methyl-2-oxo-1,3-dioxol-4-yl)methyl 2-ethoxy-1-{[2'-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)biphenyl-4-yl]methyl}-1H-benzimidazole-7-carboxylate mono potassium salt. Its empirical formula is C30H23KN4O8 and its structural formula is. Azilsartan kamedoxomil is a white to off-white colored powder with a molecular weight of 606.62. It is practically insoluble in water, sparingly soluble in methanol; and soluble in N, N-Dimethylformamide. Azilsartan medoxomil is available for oral use as tablets. The tablets have a characteristic odor. Each azilsartan medoxomil tablet contains 42.68 or 85.36 mg of azilsartan kamedoxomil, which is equivalent to containing 40 mg or 80 mg respectively, of azilsartan medoxomil and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose and vanillin.</Description>
</NDC>
<NDC>
<NDCCode>70748-237-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70748-237-06) </PackageDescription>
<NDC11Code>70748-0237-06</NDC11Code>
<ProductNDC>70748-237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azilsartan Medoxomil</ProprietaryName>
<NonProprietaryName>Azilsartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214489</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AZILSARTAN KAMEDOXOMIL</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Blocker [EPC], Angiotensin 2 Type 1 Receptor Antagonists [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azilsartan medoxomil tablets are indicated for the treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with azilsartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality and it can be concluded that it is blood pressure reduction and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia) and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure or diabetic kidney disease). These considerations may guide selection of therapy. Azilsartan medoxomil tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Azilsartan medoxomil, a prodrug, is hydrolyzed to azilsartan in the gastrointestinal tract during absorption. Azilsartan is an angiotensin II receptor blocker. The drug substance used in the drug product formulation is the potassium salt of azilsartan medoxomil, also known by the US accepted name of azilsartan kamedoxomil and is chemically described as (5-Methyl-2-oxo-1,3-dioxol-4-yl)methyl 2-ethoxy-1-{[2'-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)biphenyl-4-yl]methyl}-1H-benzimidazole-7-carboxylate mono potassium salt. Its empirical formula is C30H23KN4O8 and its structural formula is. Azilsartan kamedoxomil is a white to off-white colored powder with a molecular weight of 606.62. It is practically insoluble in water, sparingly soluble in methanol; and soluble in N, N-Dimethylformamide. Azilsartan medoxomil is available for oral use as tablets. The tablets have a characteristic odor. Each azilsartan medoxomil tablet contains 42.68 or 85.36 mg of azilsartan kamedoxomil, which is equivalent to containing 40 mg or 80 mg respectively, of azilsartan medoxomil and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose and vanillin.</Description>
</NDC>
<NDC>
<NDCCode>70748-238-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70748-238-06) </PackageDescription>
<NDC11Code>70748-0238-06</NDC11Code>
<ProductNDC>70748-238</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216063</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLVAPTAN</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vasopressin V2 Receptor Antagonist [EPC], Vasopressin V2 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).</IndicationAndUsage>
<Description>Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-239-06</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (70748-239-06) </PackageDescription>
<NDC11Code>70748-0239-06</NDC11Code>
<ProductNDC>70748-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216063</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TOLVAPTAN</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vasopressin V2 Receptor Antagonist [EPC], Vasopressin V2 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).</IndicationAndUsage>
<Description>Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide.</Description>
</NDC>
</NDCList>