{
"NDC": [
{
"NDCCode": "70748-196-07",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (70748-196-07) ",
"NDC11Code": "70748-0196-07",
"ProductNDC": "70748-196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213808",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "49; 51",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250729",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).",
"Description": "Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc."
},
{
"NDCCode": "33342-196-07",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (33342-196-07) ",
"NDC11Code": "33342-0196-07",
"ProductNDC": "33342-196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venlafaxine Hydrochloride",
"NonProprietaryName": "Venlafaxine Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20171006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204889",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "VENLAFAXINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171006",
"SamplePackage": "N",
"IndicationAndUsage": "Venlafaxine hydrochloride extended-release capsules are indicated in adults for the treatment of: Major Depressive Disorder (MDD) [see Clinical Studies (14.1)] Generalized Anxiety Disorder (GAD) [see Clinical Studies (14.2)] Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)] Panic Disorder (PD) [see Clinical Studies (14.4)].",
"Description": "Venlafaxine hydrochloride extended-release capsules, USP are an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C17H27NO2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows. Venlafaxine hydrochloride is a white to off-white crystalline solid, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of corn starch, ethyl cellulose, gelatin, hydroxy propyl cellulose, hydroxy propyl methyl cellulose, iron oxide black, iron oxide red, iron oxide yellow, microcrystalline cellulose, sodium lauryl sulfate, talc and titanium dioxide. The drug product meets USP Dissolution Test 12."
},
{
"NDCCode": "54340-196-08",
"PackageDescription": "12 BOTTLE, PUMP in 1 CARTON (54340-196-08) / 221 mL in 1 BOTTLE, PUMP (54340-196-07) ",
"NDC11Code": "54340-0196-08",
"ProductNDC": "54340-196",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dial Professional Complete Antibacterial Foaming Hand Wash Original Scent",
"NonProprietaryName": "Dial Professional Complete Antibacterial Foaming Hand Wash Original Scent",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20221201",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Henkel Corporation",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".13",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20221201",
"SamplePackage": "N",
"IndicationAndUsage": "Uses. For hand washing to decrease bacteria on the skin."
},
{
"NDCCode": "55316-196-07",
"PackageDescription": "221 mL in 1 BOTTLE, PLASTIC (55316-196-07)",
"NDC11Code": "55316-0196-07",
"ProductNDC": "55316-196",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Healthy Accents Antibacterial Foaming Hand",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170606",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "DZA Brands LLC",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"IndicationAndUsage": "For washing to decrease bacteria on the skin."
},
{
"NDCCode": "66487-001-07",
"PackageDescription": "196 L in 1 DEWAR (66487-001-07) ",
"NDC11Code": "66487-0001-07",
"ProductNDC": "66487-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19990109",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205840",
"LabelerName": "ROBINSON`S INDUSTRIAL GAS & EQUIPMENT CORP.",
"SubstanceName": "OXYGEN",
"StrengthNumber": "997",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990109",
"SamplePackage": "N"
},
{
"NDCCode": "71919-196-07",
"PackageDescription": "15 mL in 1 VIAL, GLASS (71919-196-07) ",
"NDC11Code": "71919-0196-07",
"ProductNDC": "71919-196",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chromium Sulphuricum",
"NonProprietaryName": "Chromic Sulfate Pentadecahydrate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20160202",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "CHROMIC SULFATE PENTADECAHYDRATE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20160202",
"SamplePackage": "N"
},
{
"NDCCode": "70748-102-07",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-102-07) ",
"NDC11Code": "70748-0102-07",
"ProductNDC": "70748-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"NonProprietaryName": "Dapagliflozin And Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260417",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211579",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "5; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260417",
"SamplePackage": "N",
"IndicationAndUsage": "Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.",
"Description": "Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake."
},
{
"NDCCode": "70748-195-07",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (70748-195-07) ",
"NDC11Code": "70748-0195-07",
"ProductNDC": "70748-195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213808",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250729",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).",
"Description": "Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc."
},
{
"NDCCode": "70748-197-07",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (70748-197-07) ",
"NDC11Code": "70748-0197-07",
"ProductNDC": "70748-197",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213808",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250729",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).",
"Description": "Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc."
},
{
"NDCCode": "70748-208-07",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-208-07) / 60 TABLET in 1 BOTTLE",
"NDC11Code": "70748-0208-07",
"ProductNDC": "70748-208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dasatinib",
"NonProprietaryName": "Dasatinib",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214350",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DASATINIB",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.",
"Description": "Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide."
},
{
"NDCCode": "70748-209-07",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-209-07) / 60 TABLET in 1 BOTTLE",
"NDC11Code": "70748-0209-07",
"ProductNDC": "70748-209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dasatinib",
"NonProprietaryName": "Dasatinib",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214350",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DASATINIB",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.",
"Description": "Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide."
},
{
"NDCCode": "70748-210-07",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-210-07) / 60 TABLET in 1 BOTTLE",
"NDC11Code": "70748-0210-07",
"ProductNDC": "70748-210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dasatinib",
"NonProprietaryName": "Dasatinib",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214350",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DASATINIB",
"StrengthNumber": "70",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.",
"Description": "Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide."
},
{
"NDCCode": "70748-215-07",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (70748-215-07) ",
"NDC11Code": "70748-0215-07",
"ProductNDC": "70748-215",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen And Esomeprazole Magnesium",
"NonProprietaryName": "Naproxen And Esomeprazole Magnesium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200304",
"EndMarketingDate": "20240930",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA022511",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM; NAPROXEN",
"StrengthNumber": "20; 375",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200304",
"EndMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Naproxen and esomeprazole magnesium delayed-release tablets, a combination of naproxen and esomeprazole magnesium, are indicated in adult and adolescent patients 12 years of age and older weighing at least 38 kg, requiring naproxen for symptomatic relief of arthritis and esomeprazole magnesium to decrease the risk for developing naproxen-associated gastric ulcers. The naproxen component of naproxen and esomeprazole magnesium delayed-release tablets is indicated for relief of signs and symptoms of: 1 osteoarthritis, rheumatoid arthritis and ankylosing spondylitis in adults., 2 juvenile idiopathic arthritis (JIA) in adolescent patients.",
"Description": "The active ingredients of naproxen and esomeprazole magnesium delayed-release tablets are naproxen which is an NSAID and esomeprazole magnesium which is a Proton Pump Inhibitor (PPI). Naproxen and esomeprazole magnesium delayed-release tablet is combination of a nonsteroidal anti- inflammatory drug and a PPI available as an oval, yellow, multi-layer, delayed-release tablet combining an enteric-coated naproxen core and an immediate-release esomeprazole magnesium layer surrounding the core. Each strength contains either 375 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 500 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) for oral administration. The inactive ingredients are carnauba wax, colloidal silicon dioxide, croscarmellose sodium, iron oxide yellow, glyceryl monostearate, hypromellose, iron oxide black, magnesium stearate, methacrylic acid copolymer dispersion, methylparaben, polysorbate 80, polydextrose, polyethylene glycol, povidone, propylene glycol, propylparaben, titanium dioxide, and triethyl citrate. The chemical name for naproxen is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. Naproxen has the following structure:. Naproxen has a molecular weight of 230.26 and a molecular formula of C14H14O3.Naproxen is an odorless, white to off-white crystalline substance. It is lipid soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen at pH 7.4 is 1.6 to 1.8. The chemical name for esomeprazole is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2- pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate. Esomeprazole is the S- isomer of omeprazole, which is a mixture of the S- and R- isomers. Its molecular formula is (C17H18N3O3S)2 Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C."
},
{
"NDCCode": "70748-216-07",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (70748-216-07) ",
"NDC11Code": "70748-0216-07",
"ProductNDC": "70748-216",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen And Esomeprazole Magnesium",
"NonProprietaryName": "Naproxen And Esomeprazole Magnesium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200304",
"EndMarketingDate": "20240930",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA022511",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM; NAPROXEN",
"StrengthNumber": "20; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200304",
"EndMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Naproxen and esomeprazole magnesium delayed-release tablets, a combination of naproxen and esomeprazole magnesium, are indicated in adult and adolescent patients 12 years of age and older weighing at least 38 kg, requiring naproxen for symptomatic relief of arthritis and esomeprazole magnesium to decrease the risk for developing naproxen-associated gastric ulcers. The naproxen component of naproxen and esomeprazole magnesium delayed-release tablets is indicated for relief of signs and symptoms of: 1 osteoarthritis, rheumatoid arthritis and ankylosing spondylitis in adults., 2 juvenile idiopathic arthritis (JIA) in adolescent patients.",
"Description": "The active ingredients of naproxen and esomeprazole magnesium delayed-release tablets are naproxen which is an NSAID and esomeprazole magnesium which is a Proton Pump Inhibitor (PPI). Naproxen and esomeprazole magnesium delayed-release tablet is combination of a nonsteroidal anti- inflammatory drug and a PPI available as an oval, yellow, multi-layer, delayed-release tablet combining an enteric-coated naproxen core and an immediate-release esomeprazole magnesium layer surrounding the core. Each strength contains either 375 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 500 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) for oral administration. The inactive ingredients are carnauba wax, colloidal silicon dioxide, croscarmellose sodium, iron oxide yellow, glyceryl monostearate, hypromellose, iron oxide black, magnesium stearate, methacrylic acid copolymer dispersion, methylparaben, polysorbate 80, polydextrose, polyethylene glycol, povidone, propylene glycol, propylparaben, titanium dioxide, and triethyl citrate. The chemical name for naproxen is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. Naproxen has the following structure:. Naproxen has a molecular weight of 230.26 and a molecular formula of C14H14O3.Naproxen is an odorless, white to off-white crystalline substance. It is lipid soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen at pH 7.4 is 1.6 to 1.8. The chemical name for esomeprazole is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2- pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate. Esomeprazole is the S- isomer of omeprazole, which is a mixture of the S- and R- isomers. Its molecular formula is (C17H18N3O3S)2 Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C."
},
{
"NDCCode": "70748-258-07",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (70748-258-07) ",
"NDC11Code": "70748-0258-07",
"ProductNDC": "70748-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Posaconazole",
"NonProprietaryName": "Posaconazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213454",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "POSACONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS]",
"Status": "Active",
"LastUpdate": "2026-05-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210217",
"SamplePackage": "N",
"IndicationAndUsage": "Posaconazole is an azole antifungal indicated as follows: 1 Posaconazole is indicated for the prophylaxis of invasive Aspergillus and Candida infections in patients who are at high risk of developing these infections due to being severely immunocompromised, such as hematopoietic stem cell transplant (HSCT) recipients with graft-versus-host disease (GVHD)or those with hematologic malignancies with prolonged neutropenia from chemotherapy as follows: (1.2).",
"Description": "Posaconazole delayed-release tablets contain posaconazole, an azole antifungal agent. Posaconazole is designated chemically as 4-[4-[4-[4-[[ (3R,5R)-5- (2,4-difluorophenyl)tetrahydro-5 - (1H-1,2,4-triazol-1-ylmethyl)-3-furanyl]methoxy]phenyl]-1-piperazinyl]phenyl]-2-[(1S,2S)-1-ethyl-2 - hydroxypropyl]-2,4-dihydro-3H-1,2,4-triazol-3-one with an empirical formula of C37H42F2N8O4 and a molecular weight of 700.8. The chemical structure is. Posaconazole is a white powder with a low aqueous solubility. Posaconazole delayed-release tablet, for oral use, is yellow, coated, capsule-shaped tablets containing 100 mg of posaconazole. Each delayed-release tablet contains the inactive ingredients: partially neutralized methacrylic acid and ethyl acrylate copolymer, triethyl citrate, xylitol, hydroxypropyl cellulose, propyl gallate, cellulose, microcrystalline, silica, colloidal anhydrous, croscarmellose sodium, sodium stearyl fumarate and Opadry® II Yellow (consists of the following ingredients: polyvinyl alcohol partially hydrolyzed, macrogol, polyethylene glycol, titanium dioxide, talc, and iron oxide yellow)."
},
{
"NDCCode": "70748-173-26",
"PackageDescription": "180 TABLET in 1 BOTTLE (70748-173-26) ",
"NDC11Code": "70748-0173-26",
"ProductNDC": "70748-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevelamer Hydrochloride",
"NonProprietaryName": "Sevelamer Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213145",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SEVELAMER HYDROCHLORIDE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220225",
"SamplePackage": "N",
"IndicationAndUsage": "Sevelamer hydrochloride tablets are indicated for the control of serum phosphorus in patients with chronic kidney disease (CKD) on dialysis. The safety and efficacy of sevelamer hydrochloride tablets in CKD patients who are not on dialysis have not been studied.",
"Description": "The active ingredient in sevelamer hydrochloride tablets is sevelamer hydrochloride, a polymeric amine that binds phosphate and is meant for oral administration. Sevelamer hydrochloride is poly (allylamine hydrochloride) crosslinked with epichlorohydrin in which 40 % of the amines are protonated. It is known chemically as poly (allylamine-co-N, N'-diallyl-1,3-diamino-2-hydroxypropane) hydrochloride. Sevelamer hydrochloride is hydrophilic, but insoluble in water. The structure is represented in Figure 1. Figure 1: Chemical Structure of Sevelamer Hydrochloride. The primary amine groups shown in the structure are derived directly from poly (allylamine hydrochloride). The crosslinking groups consist of two secondary amine groups derived from poly (allylamine hydrochloride) and one molecule of epichlorohydrin. Sevelamer Hydrochloride Tablets: Each film-coated tablet of sevelamer hydrochloride contains either 400 mg or 800 mg of sevelamer hydrochloride on an anhydrous basis. The inactive ingredients are colloidal silicon dioxide, stearic acid and Opadry Clear 84F590009 containing polyethylene glycol, polyvinyl alcohol, and talc. The tablet imprint contains Opacode S-1-17823 Black containing ferrosoferric oxide, propylene glycol and shellac."
},
{
"NDCCode": "70748-273-01",
"PackageDescription": "1 SYRINGE in 1 CARTON (70748-273-01) / .6 mL in 1 SYRINGE",
"NDC11Code": "70748-0273-01",
"ProductNDC": "70748-273",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Armlupeg",
"NonProprietaryName": "Pegfilgrastim-unne",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260401",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761212",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "PEGFILGRASTIM",
"StrengthNumber": "6",
"StrengthUnit": "mg/.6mL",
"Pharm_Classes": "Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260401",
"SamplePackage": "N",
"IndicationAndUsage": "Armlupeg is a leukocyte growth factor indicated to : 1 Decrease the incidence of infection, as manifested by febrile neutropenia, in patients with non-myeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a clinically significant incidence of febrile neutropenia. (1.1) , 2 Increase survival in patients acutely exposed to myelosuppressive doses of radiation (Hematopoietic Subsyndrome of Acute Radiation Syndrome). (1.2).",
"Description": "Pegfilgrastim-unne is a covalent conjugate of recombinant methionyl human G-CSF and monomethoxypolyethylene glycol. Recombinant methionyl human G-CSF is a water-soluble 175 amino acid protein with a molecular weight of approximately 19 kilodaltons (kD). Recombinant methionyl human G-CSF is obtained from the bacterial fermentation of a strain of E coli transformed with a genetically engineered plasmid containing the human G-CSF gene. To produce pegfilgrastim-unne, a 20 kD monomethoxypolyethylene glycol molecule is covalently bound to the N-terminal methionyl residue of recombinant methionyl human G-CSF. The average molecular weight of pegfilgrastim-unne is approximately 39 kD. Armlupeg (pegfilgrastim-unne) injection is a sterile, clear, colorless, preservative-free solution intended for subcutaneous use only and is supplied in a single-dose prefilled syringe with a 27‑gauge ½\" needle and rigid needle shield, with UltraSafe Plus PassiveTM Needle Guard. The prefilled syringe does not bear graduation marks and is designed to deliver the entire contents of the syringe (6 mg/0.6 mL). Each prefilled syringe contains 0.6 mL solution of 6 mg pegfilgrastim-unne (based on protein weight), glacial acetic acid (0.77 mg), polysorbate 20 (0.02 mg), sodium acetate (0.066 mg) and sorbitol (30 mg) in Water for Injection, USP. The pH is 4."
},
{
"NDCCode": "70748-370-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70748-370-02) / 2 mL in 1 VIAL, SINGLE-DOSE (70748-370-01) ",
"NDC11Code": "70748-0370-02",
"ProductNDC": "70748-370",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sugammadex",
"NonProprietaryName": "Sugammadex",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214338",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SUGAMMADEX SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "gamma-Cyclodextrins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260728",
"SamplePackage": "N",
"IndicationAndUsage": "Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is."
},
{
"NDCCode": "70748-371-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70748-371-02) / 5 mL in 1 VIAL, SINGLE-DOSE (70748-371-01) ",
"NDC11Code": "70748-0371-02",
"ProductNDC": "70748-371",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sugammadex",
"NonProprietaryName": "Sugammadex",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214338",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SUGAMMADEX SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "gamma-Cyclodextrins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260728",
"SamplePackage": "N",
"IndicationAndUsage": "Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is."
},
{
"NDCCode": "0703-3678-81",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0703-3678-81) > 40 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00703-3678-81",
"ProductNDC": "0703-3678",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRA-ARTERIAL; INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS",
"StartMarketingDate": "20151214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040843",
"LabelerName": "Teva Parenteral Medicines, Inc.",
"SubstanceName": "METHOTREXATE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20151214",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:Treatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen (1.1)Prophylaxis and treatment of adult and pediatric patients with meningeal leukemia (1.2)Treatment of adult and pediatric patients with non-Hodgkin lymphoma (1.3) Treatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen (1.4)Treatment of adults with breast cancer as part of a combination chemotherapy regimen (1.5)Treatment of adults with squamous cell carcinoma of the head and neck as single-agent (1.6)Treatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen (1.7) Treatment of adults with rheumatoid arthritis (RA). (1.8)Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9)Treatment of adults with severe psoriasis. (1.10).",
"Description": "Methotrexate, USP (formerly Amethopterin) is a folate analog metabolic inhibitor used in the treatment of certain neoplastic diseases, severe psoriasis, and adult rheumatoid arthritis. Chemically methotrexate, USP is N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid. The structural formula is. C20H22N8O5 M.W. 454.45. Preservative-free Methotrexate Injection, USP is supplied in sterile single-dose vials for intravenous, intramuscular, subcutaneous, or intrathecal use. Methotrexate Injection, USP, Isotonic Liquid, Preservative Free is available in 1 gram/40 mL single-dose vials. : 1 Each 25 mg/mL, 40 mL vial contains 1,000 mg methotrexate, USP equivalent to 1,096.7 mg of methotrexate sodium, and the following inactive ingredients: sodium chloride 196 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5."
},
{
"NDCCode": "0904-6440-61",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0904-6440-61) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "00904-6440-61",
"ProductNDC": "0904-6440",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20150514",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "13537-196-06",
"PackageDescription": "1 BOTTLE in 1 BOX (13537-196-06) > 6 g in 1 BOTTLE (13537-196-05)",
"NDC11Code": "13537-0196-06",
"ProductNDC": "13537-196",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika 3-in-1 Pro Make Up Foundation Spf 20 Base De Maquillaje Para Rostro 3-en-1 Pro Fps 20",
"ProprietaryNameSuffix": "(rose 3) - Rose",
"NonProprietaryName": "Octinoxate, Oxybenzone, And Titanium Dioxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140306",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; OXYBENZONE; TITANIUM DIOXIDE",
"StrengthNumber": ".07; .02; .02",
"StrengthUnit": "g/g; g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "30142-196-26",
"PackageDescription": "1 BOTTLE in 1 CARTON (30142-196-26) > 118 mL in 1 BOTTLE",
"NDC11Code": "30142-0196-26",
"ProductNDC": "30142-196",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens Pain Relief Plus",
"ProprietaryNameSuffix": "Cough And Sore Throat",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hbr",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20080825",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Kroger Company",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "160; 5",
"StrengthUnit": "mg/5mL; mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "42507-196-26",
"PackageDescription": "1 BOTTLE in 1 CARTON (42507-196-26) > 118 mL in 1 BOTTLE",
"NDC11Code": "42507-0196-26",
"ProductNDC": "42507-196",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cough And Sore Throat",
"ProprietaryNameSuffix": "Childrens Pain Relief",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hbr",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20081013",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "HyVee Inc",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "160; 5",
"StrengthUnit": "mg/5mL; mg/5mL",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "43419-025-20",
"PackageDescription": "1 CONTAINER in 1 CARTON (43419-025-20) > 10 g in 1 CONTAINER",
"NDC11Code": "43419-0025-20",
"ProductNDC": "43419-025",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sulwhasoo Evenfair Smoothing Foundation",
"ProprietaryNameSuffix": "Spf25 No.2 Medium Beige",
"NonProprietaryName": "Octinoxate, Titanium Dioxide, And Zinc Oxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121123",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Amorepacific Corporation",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": ".32; .4268; .196",
"StrengthUnit": "g/10g; g/10g; g/10g",
"Status": "Deprecated",
"LastUpdate": "2019-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20121123",
"SamplePackage": "N"
},
{
"NDCCode": "43419-026-20",
"PackageDescription": "1 CONTAINER in 1 CARTON (43419-026-20) > 10 g in 1 CONTAINER",
"NDC11Code": "43419-0026-20",
"ProductNDC": "43419-026",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sulwhasoo Evenfair Smoothing Foundation",
"ProprietaryNameSuffix": "Spf25 No.3 Medium Ocher",
"NonProprietaryName": "Octinoxate, Titanium Dioxide, And Zinc Oxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121123",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Amorepacific Corporation",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": ".32; .4268; .196",
"StrengthUnit": "g/10g; g/10g; g/10g",
"Status": "Deprecated",
"LastUpdate": "2019-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20121123",
"SamplePackage": "N"
},
{
"NDCCode": "50090-4641-0",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (50090-4641-0) ",
"NDC11Code": "50090-4641-00",
"ProductNDC": "50090-4641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20191023",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "50090-4641-4",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (50090-4641-4) ",
"NDC11Code": "50090-4641-04",
"ProductNDC": "50090-4641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-09-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20191023",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "50742-246-18",
"PackageDescription": "180 TABLET in 1 BOTTLE (50742-246-18) ",
"NDC11Code": "50742-0246-18",
"ProductNDC": "50742-246",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate And Hydralazine Hydrochloride",
"NonProprietaryName": "Isosorbide Dinitrate And Hydralazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215586",
"LabelerName": "Ingenus Pharmaceuticals, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE; ISOSORBIDE DINITRATE",
"StrengthNumber": "37.5; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC], Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220412",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate and hydralazine hydrochloride tablets is a combination of isosorbide dinitrate, a nitrate vasodilator, and hydralazine hydrochloride, an arteriolar vasodilator, indicated for:. ● the treatment of heart failure as an adjunct therapy to standard therapy in self-identified black patients to improve survival, prolong time to hospitalization for heart failure and to improve patient-reported functional status (1.1). Limitations of use:. ● There is little experience in patients with NYHA class IV heart failure (1.2).",
"Description": "Isosorbide dinitrate and hydralazine hydrochloride tablets is a fixed-dose combination of isosorbide dinitrate, a vasodilator with effects on both arteries and veins, and hydralazine hydrochloride, a predominantly arterial vasodilator. Isosorbide dinitrate is described chemically as 1,4:3,6-dianhydro-D-glucitol dinitrate and its structural formula is. Isosorbide dinitrate is a white to off-white, crystalline powder with the empirical formula C6H8N2O8 and a molecular weight of 236.14. It is freely soluble in organic solvents such as alcohol, chloroform and ether, but is only sparingly soluble in water. Hydralazine hydrochloride is described chemically as 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Hydralazine hydrochloride is a white to off-white, crystalline powder with the empirical formula C8H8N4HCl and a molecular weight of 196.64. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. Each isosorbide dinitrate and hydralazine hydrochloride tablet for oral administration contains 20 mg of isosorbide dinitrate and 37.5 mg of hydralazine hydrochloride. The inactive ingredients in isosorbide dinitrate and hydralazine hydrochloride tablets include: microcrystalline cellulose, anhydrous lactose, hypromellose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, mannitol, FD&C yellow #6, stearic acid, triacetin, FDC red #40 and FDC blue #1."
},
{
"NDCCode": "50742-246-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (50742-246-90) ",
"NDC11Code": "50742-0246-90",
"ProductNDC": "50742-246",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate And Hydralazine Hydrochloride",
"NonProprietaryName": "Isosorbide Dinitrate And Hydralazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215586",
"LabelerName": "Ingenus Pharmaceuticals, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE; ISOSORBIDE DINITRATE",
"StrengthNumber": "37.5; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC], Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220412",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate and hydralazine hydrochloride tablets is a combination of isosorbide dinitrate, a nitrate vasodilator, and hydralazine hydrochloride, an arteriolar vasodilator, indicated for:. ● the treatment of heart failure as an adjunct therapy to standard therapy in self-identified black patients to improve survival, prolong time to hospitalization for heart failure and to improve patient-reported functional status (1.1). Limitations of use:. ● There is little experience in patients with NYHA class IV heart failure (1.2).",
"Description": "Isosorbide dinitrate and hydralazine hydrochloride tablets is a fixed-dose combination of isosorbide dinitrate, a vasodilator with effects on both arteries and veins, and hydralazine hydrochloride, a predominantly arterial vasodilator. Isosorbide dinitrate is described chemically as 1,4:3,6-dianhydro-D-glucitol dinitrate and its structural formula is. Isosorbide dinitrate is a white to off-white, crystalline powder with the empirical formula C6H8N2O8 and a molecular weight of 236.14. It is freely soluble in organic solvents such as alcohol, chloroform and ether, but is only sparingly soluble in water. Hydralazine hydrochloride is described chemically as 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Hydralazine hydrochloride is a white to off-white, crystalline powder with the empirical formula C8H8N4HCl and a molecular weight of 196.64. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. Each isosorbide dinitrate and hydralazine hydrochloride tablet for oral administration contains 20 mg of isosorbide dinitrate and 37.5 mg of hydralazine hydrochloride. The inactive ingredients in isosorbide dinitrate and hydralazine hydrochloride tablets include: microcrystalline cellulose, anhydrous lactose, hypromellose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, mannitol, FD&C yellow #6, stearic acid, triacetin, FDC red #40 and FDC blue #1."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70748-196-07</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70748-196-07) </PackageDescription>
<NDC11Code>70748-0196-07</NDC11Code>
<ProductNDC>70748-196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213808</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>49; 51</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc.</Description>
</NDC>
<NDC>
<NDCCode>33342-196-07</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (33342-196-07) </PackageDescription>
<NDC11Code>33342-0196-07</NDC11Code>
<ProductNDC>33342-196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
<NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204889</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are indicated in adults for the treatment of: Major Depressive Disorder (MDD) [see Clinical Studies (14.1)] Generalized Anxiety Disorder (GAD) [see Clinical Studies (14.2)] Social Anxiety Disorder (SAD) [see Clinical Studies (14.3)] Panic Disorder (PD) [see Clinical Studies (14.4)].</IndicationAndUsage>
<Description>Venlafaxine hydrochloride extended-release capsules, USP are an extended-release capsule for once-a-day oral administration that contains venlafaxine hydrochloride, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α-[(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C17H27NO2 HCl. Its molecular weight is 313.86. The structural formula is shown as follows. Venlafaxine hydrochloride is a white to off-white crystalline solid, with a solubility of 572 mg/mL in water (adjusted to ionic strength of 0.2 M with sodium chloride). Its octanol:water (0.2 M sodium chloride) partition coefficient is 0.43. Drug release is controlled by diffusion through the coating membrane on the spheroids and is not pH-dependent. Capsules contain venlafaxine hydrochloride equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of corn starch, ethyl cellulose, gelatin, hydroxy propyl cellulose, hydroxy propyl methyl cellulose, iron oxide black, iron oxide red, iron oxide yellow, microcrystalline cellulose, sodium lauryl sulfate, talc and titanium dioxide. The drug product meets USP Dissolution Test 12.</Description>
</NDC>
<NDC>
<NDCCode>54340-196-08</NDCCode>
<PackageDescription>12 BOTTLE, PUMP in 1 CARTON (54340-196-08) / 221 mL in 1 BOTTLE, PUMP (54340-196-07) </PackageDescription>
<NDC11Code>54340-0196-08</NDC11Code>
<ProductNDC>54340-196</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dial Professional Complete Antibacterial Foaming Hand Wash Original Scent</ProprietaryName>
<NonProprietaryName>Dial Professional Complete Antibacterial Foaming Hand Wash Original Scent</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20221201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Henkel Corporation</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.13</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses. For hand washing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55316-196-07</NDCCode>
<PackageDescription>221 mL in 1 BOTTLE, PLASTIC (55316-196-07)</PackageDescription>
<NDC11Code>55316-0196-07</NDC11Code>
<ProductNDC>55316-196</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Healthy Accents Antibacterial Foaming Hand</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170606</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>DZA Brands LLC</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For washing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>66487-001-07</NDCCode>
<PackageDescription>196 L in 1 DEWAR (66487-001-07) </PackageDescription>
<NDC11Code>66487-0001-07</NDC11Code>
<ProductNDC>66487-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19990109</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205840</ApplicationNumber>
<LabelerName>ROBINSON`S INDUSTRIAL GAS & EQUIPMENT CORP.</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>997</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71919-196-07</NDCCode>
<PackageDescription>15 mL in 1 VIAL, GLASS (71919-196-07) </PackageDescription>
<NDC11Code>71919-0196-07</NDC11Code>
<ProductNDC>71919-196</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chromium Sulphuricum</ProprietaryName>
<NonProprietaryName>Chromic Sulfate Pentadecahydrate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160202</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>CHROMIC SULFATE PENTADECAHYDRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70748-102-07</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (70748-102-07) </PackageDescription>
<NDC11Code>70748-0102-07</NDC11Code>
<ProductNDC>70748-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Dapagliflozin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260417</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211579</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Sodium-Glucose Cotransporter 2 Inhibitor [EPC], Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dapagliflozin and metformin hydrochloride extended-release tablets are combination of dapagliflozin and metformin hydrochloride (HCl) extended-release, indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Dapagliflozin when used as a component of dapagliflozin and metformin hydrochloride extended-release tablets, is indicated in adults with type 2 diabetes mellitus to reduce the risk of: 1 Sustained eGFR decline, end-stage kidney disease, (CV) death and hospitalization for heart failure in patients with chronic kidney disease at risk of progression., 2 CV death, hospitalization for heart failure and urgent heart failure visit in patients with heart failure., 3 Hospitalization for heart failure in patients with type 2 diabetes mellitus and either established CV disease or multiple CV risk factors.</IndicationAndUsage>
<Description>Dapagliflozin and metformin hydrochloride extended-release tablets contain: dapagliflozin, a SGLT2 inhibitor, and metformin HCl, a biguanide. Dapagliflozin. Dapagliflozin is described chemically as, (2S,3R,4R,5S,6R)-2-(4-chloro-3-(4-ethoxybenzyl)phenyl)-6-(hydroxymethyl) tetrahydro-2H-pyran-3,4,5-triol. The empirical formula is C21H25ClO6 and the formula weight is 408.88. The structural formula is. Metformin hydrochloride. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, and is practically insoluble in acetone, and methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is. Dapagliflozin and Metformin Hydrochloride Extended-Release Tablets. Dapagliflozin and metformin hydrochloride extended-release tablets are available for oral administration as tablets containing 5 mg dapagliflozin and 500 mg metformin hydrochloride, 5 mg dapagliflozin and 1000 mg metformin hydrochloride, 10 mg dapagliflozin and 500 mg metformin hydrochloride, or 10 mg dapagliflozin and 1000 mg metformin hydrochloride. Each film-coated tablet of dapagliflozin and metformin hydrochloride extended-release tablet contains the following inactive ingredients: crospovidone, colloidal silicon dioxide, hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, povidone, sodium carboxymethyl cellulose, sodium stearyl fumarate. The film coatings contain the following inactive ingredients: polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide. Additionally, the film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/500 mg tablets contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 5 mg/1000 mg contains iron oxide red and iron oxide black. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/500 mg contains iron oxide red and iron oxide yellow. The film coating for the dapagliflozin and metformin hydrochloride extended-release tablets 10 mg/1000 mg tablets contains D & C Yellow #10 Aluminum lake, FD & C Yellow #6/ sunset yellow FCF aluminum lake, FD & C Blue #2/ indigo carmine aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>70748-195-07</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70748-195-07) </PackageDescription>
<NDC11Code>70748-0195-07</NDC11Code>
<ProductNDC>70748-195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213808</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc.</Description>
</NDC>
<NDC>
<NDCCode>70748-197-07</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70748-197-07) </PackageDescription>
<NDC11Code>70748-0197-07</NDC11Code>
<ProductNDC>70748-197</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213808</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).</IndicationAndUsage>
<Description>Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc.</Description>
</NDC>
<NDC>
<NDCCode>70748-208-07</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-208-07) / 60 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0208-07</NDC11Code>
<ProductNDC>70748-208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dasatinib</ProprietaryName>
<NonProprietaryName>Dasatinib</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214350</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DASATINIB</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.</IndicationAndUsage>
<Description>Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-209-07</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-209-07) / 60 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0209-07</NDC11Code>
<ProductNDC>70748-209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dasatinib</ProprietaryName>
<NonProprietaryName>Dasatinib</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214350</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DASATINIB</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.</IndicationAndUsage>
<Description>Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-210-07</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-210-07) / 60 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0210-07</NDC11Code>
<ProductNDC>70748-210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dasatinib</ProprietaryName>
<NonProprietaryName>Dasatinib</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214350</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DASATINIB</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dasatinib tablets are indicated for the treatment of adult patients with: 1 newly diagnosed Philadelphia chromosome-positive (Ph+) chronic myeloid leukemia (CML) in chronic phase., 2 chronic, accelerated, or myeloid or lymphoid blast phase Ph+ CML with resistance or intolerance to prior therapy including imatinib., 3 Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ ALL) with resistance or intolerance to prior therapy.</IndicationAndUsage>
<Description>Dasatinib is a kinase inhibitor. The chemical name for dasatinib is N-(2-chloro-6-methylphenyl)-2-[[6-[4-(2-hydroxyethyl)-1-piperazinyl]-2-methyl-4-pyrimidinyl]amino]-5-thiazolecarboxamide. The molecular formula is C22H26ClN7O2S, which corresponds to a molecular weight of 488.01. Dasatinib has the following chemical structure. Dasatinib is a white to off-white powder. The drug substance is insoluble in water and slightly soluble in ethanol and methanol. Dasatinib tablets are white to off-white, film-coated tablets containing dasatinib, with the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, magnesium stearate, talc. The tablet coating consists of hypromellose, medium chain triglycerides, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-215-07</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (70748-215-07) </PackageDescription>
<NDC11Code>70748-0215-07</NDC11Code>
<ProductNDC>70748-215</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen And Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Naproxen And Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200304</StartMarketingDate>
<EndMarketingDate>20240930</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA022511</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM; NAPROXEN</SubstanceName>
<StrengthNumber>20; 375</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200304</StartMarketingDatePackage>
<EndMarketingDatePackage>20240930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naproxen and esomeprazole magnesium delayed-release tablets, a combination of naproxen and esomeprazole magnesium, are indicated in adult and adolescent patients 12 years of age and older weighing at least 38 kg, requiring naproxen for symptomatic relief of arthritis and esomeprazole magnesium to decrease the risk for developing naproxen-associated gastric ulcers. The naproxen component of naproxen and esomeprazole magnesium delayed-release tablets is indicated for relief of signs and symptoms of: 1 osteoarthritis, rheumatoid arthritis and ankylosing spondylitis in adults., 2 juvenile idiopathic arthritis (JIA) in adolescent patients.</IndicationAndUsage>
<Description>The active ingredients of naproxen and esomeprazole magnesium delayed-release tablets are naproxen which is an NSAID and esomeprazole magnesium which is a Proton Pump Inhibitor (PPI). Naproxen and esomeprazole magnesium delayed-release tablet is combination of a nonsteroidal anti- inflammatory drug and a PPI available as an oval, yellow, multi-layer, delayed-release tablet combining an enteric-coated naproxen core and an immediate-release esomeprazole magnesium layer surrounding the core. Each strength contains either 375 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 500 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) for oral administration. The inactive ingredients are carnauba wax, colloidal silicon dioxide, croscarmellose sodium, iron oxide yellow, glyceryl monostearate, hypromellose, iron oxide black, magnesium stearate, methacrylic acid copolymer dispersion, methylparaben, polysorbate 80, polydextrose, polyethylene glycol, povidone, propylene glycol, propylparaben, titanium dioxide, and triethyl citrate. The chemical name for naproxen is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. Naproxen has the following structure:. Naproxen has a molecular weight of 230.26 and a molecular formula of C14H14O3.Naproxen is an odorless, white to off-white crystalline substance. It is lipid soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen at pH 7.4 is 1.6 to 1.8. The chemical name for esomeprazole is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2- pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate. Esomeprazole is the S- isomer of omeprazole, which is a mixture of the S- and R- isomers. Its molecular formula is (C17H18N3O3S)2 Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C.</Description>
</NDC>
<NDC>
<NDCCode>70748-216-07</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (70748-216-07) </PackageDescription>
<NDC11Code>70748-0216-07</NDC11Code>
<ProductNDC>70748-216</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen And Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Naproxen And Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200304</StartMarketingDate>
<EndMarketingDate>20240930</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA022511</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM; NAPROXEN</SubstanceName>
<StrengthNumber>20; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200304</StartMarketingDatePackage>
<EndMarketingDatePackage>20240930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naproxen and esomeprazole magnesium delayed-release tablets, a combination of naproxen and esomeprazole magnesium, are indicated in adult and adolescent patients 12 years of age and older weighing at least 38 kg, requiring naproxen for symptomatic relief of arthritis and esomeprazole magnesium to decrease the risk for developing naproxen-associated gastric ulcers. The naproxen component of naproxen and esomeprazole magnesium delayed-release tablets is indicated for relief of signs and symptoms of: 1 osteoarthritis, rheumatoid arthritis and ankylosing spondylitis in adults., 2 juvenile idiopathic arthritis (JIA) in adolescent patients.</IndicationAndUsage>
<Description>The active ingredients of naproxen and esomeprazole magnesium delayed-release tablets are naproxen which is an NSAID and esomeprazole magnesium which is a Proton Pump Inhibitor (PPI). Naproxen and esomeprazole magnesium delayed-release tablet is combination of a nonsteroidal anti- inflammatory drug and a PPI available as an oval, yellow, multi-layer, delayed-release tablet combining an enteric-coated naproxen core and an immediate-release esomeprazole magnesium layer surrounding the core. Each strength contains either 375 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) or 500 mg of naproxen and 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate) for oral administration. The inactive ingredients are carnauba wax, colloidal silicon dioxide, croscarmellose sodium, iron oxide yellow, glyceryl monostearate, hypromellose, iron oxide black, magnesium stearate, methacrylic acid copolymer dispersion, methylparaben, polysorbate 80, polydextrose, polyethylene glycol, povidone, propylene glycol, propylparaben, titanium dioxide, and triethyl citrate. The chemical name for naproxen is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. Naproxen has the following structure:. Naproxen has a molecular weight of 230.26 and a molecular formula of C14H14O3.Naproxen is an odorless, white to off-white crystalline substance. It is lipid soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen at pH 7.4 is 1.6 to 1.8. The chemical name for esomeprazole is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2- pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate. Esomeprazole is the S- isomer of omeprazole, which is a mixture of the S- and R- isomers. Its molecular formula is (C17H18N3O3S)2 Mg x 3 H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C.</Description>
</NDC>
<NDC>
<NDCCode>70748-258-07</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (70748-258-07) </PackageDescription>
<NDC11Code>70748-0258-07</NDC11Code>
<ProductNDC>70748-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Posaconazole</ProprietaryName>
<NonProprietaryName>Posaconazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213454</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>POSACONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Posaconazole is an azole antifungal indicated as follows: 1 Posaconazole is indicated for the prophylaxis of invasive Aspergillus and Candida infections in patients who are at high risk of developing these infections due to being severely immunocompromised, such as hematopoietic stem cell transplant (HSCT) recipients with graft-versus-host disease (GVHD)or those with hematologic malignancies with prolonged neutropenia from chemotherapy as follows: (1.2).</IndicationAndUsage>
<Description>Posaconazole delayed-release tablets contain posaconazole, an azole antifungal agent. Posaconazole is designated chemically as 4-[4-[4-[4-[[ (3R,5R)-5- (2,4-difluorophenyl)tetrahydro-5 - (1H-1,2,4-triazol-1-ylmethyl)-3-furanyl]methoxy]phenyl]-1-piperazinyl]phenyl]-2-[(1S,2S)-1-ethyl-2 - hydroxypropyl]-2,4-dihydro-3H-1,2,4-triazol-3-one with an empirical formula of C37H42F2N8O4 and a molecular weight of 700.8. The chemical structure is. Posaconazole is a white powder with a low aqueous solubility. Posaconazole delayed-release tablet, for oral use, is yellow, coated, capsule-shaped tablets containing 100 mg of posaconazole. Each delayed-release tablet contains the inactive ingredients: partially neutralized methacrylic acid and ethyl acrylate copolymer, triethyl citrate, xylitol, hydroxypropyl cellulose, propyl gallate, cellulose, microcrystalline, silica, colloidal anhydrous, croscarmellose sodium, sodium stearyl fumarate and Opadry® II Yellow (consists of the following ingredients: polyvinyl alcohol partially hydrolyzed, macrogol, polyethylene glycol, titanium dioxide, talc, and iron oxide yellow).</Description>
</NDC>
<NDC>
<NDCCode>70748-173-26</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (70748-173-26) </PackageDescription>
<NDC11Code>70748-0173-26</NDC11Code>
<ProductNDC>70748-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevelamer Hydrochloride</ProprietaryName>
<NonProprietaryName>Sevelamer Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213145</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SEVELAMER HYDROCHLORIDE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220225</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sevelamer hydrochloride tablets are indicated for the control of serum phosphorus in patients with chronic kidney disease (CKD) on dialysis. The safety and efficacy of sevelamer hydrochloride tablets in CKD patients who are not on dialysis have not been studied.</IndicationAndUsage>
<Description>The active ingredient in sevelamer hydrochloride tablets is sevelamer hydrochloride, a polymeric amine that binds phosphate and is meant for oral administration. Sevelamer hydrochloride is poly (allylamine hydrochloride) crosslinked with epichlorohydrin in which 40 % of the amines are protonated. It is known chemically as poly (allylamine-co-N, N'-diallyl-1,3-diamino-2-hydroxypropane) hydrochloride. Sevelamer hydrochloride is hydrophilic, but insoluble in water. The structure is represented in Figure 1. Figure 1: Chemical Structure of Sevelamer Hydrochloride. The primary amine groups shown in the structure are derived directly from poly (allylamine hydrochloride). The crosslinking groups consist of two secondary amine groups derived from poly (allylamine hydrochloride) and one molecule of epichlorohydrin. Sevelamer Hydrochloride Tablets: Each film-coated tablet of sevelamer hydrochloride contains either 400 mg or 800 mg of sevelamer hydrochloride on an anhydrous basis. The inactive ingredients are colloidal silicon dioxide, stearic acid and Opadry Clear 84F590009 containing polyethylene glycol, polyvinyl alcohol, and talc. The tablet imprint contains Opacode S-1-17823 Black containing ferrosoferric oxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>70748-273-01</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (70748-273-01) / .6 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>70748-0273-01</NDC11Code>
<ProductNDC>70748-273</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Armlupeg</ProprietaryName>
<NonProprietaryName>Pegfilgrastim-unne</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260401</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761212</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PEGFILGRASTIM</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/.6mL</StrengthUnit>
<Pharm_Classes>Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Armlupeg is a leukocyte growth factor indicated to : 1 Decrease the incidence of infection, as manifested by febrile neutropenia, in patients with non-myeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a clinically significant incidence of febrile neutropenia. (1.1) , 2 Increase survival in patients acutely exposed to myelosuppressive doses of radiation (Hematopoietic Subsyndrome of Acute Radiation Syndrome). (1.2).</IndicationAndUsage>
<Description>Pegfilgrastim-unne is a covalent conjugate of recombinant methionyl human G-CSF and monomethoxypolyethylene glycol. Recombinant methionyl human G-CSF is a water-soluble 175 amino acid protein with a molecular weight of approximately 19 kilodaltons (kD). Recombinant methionyl human G-CSF is obtained from the bacterial fermentation of a strain of E coli transformed with a genetically engineered plasmid containing the human G-CSF gene. To produce pegfilgrastim-unne, a 20 kD monomethoxypolyethylene glycol molecule is covalently bound to the N-terminal methionyl residue of recombinant methionyl human G-CSF. The average molecular weight of pegfilgrastim-unne is approximately 39 kD. Armlupeg (pegfilgrastim-unne) injection is a sterile, clear, colorless, preservative-free solution intended for subcutaneous use only and is supplied in a single-dose prefilled syringe with a 27‑gauge ½" needle and rigid needle shield, with UltraSafe Plus PassiveTM Needle Guard. The prefilled syringe does not bear graduation marks and is designed to deliver the entire contents of the syringe (6 mg/0.6 mL). Each prefilled syringe contains 0.6 mL solution of 6 mg pegfilgrastim-unne (based on protein weight), glacial acetic acid (0.77 mg), polysorbate 20 (0.02 mg), sodium acetate (0.066 mg) and sorbitol (30 mg) in Water for Injection, USP. The pH is 4.</Description>
</NDC>
<NDC>
<NDCCode>70748-370-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70748-370-02) / 2 mL in 1 VIAL, SINGLE-DOSE (70748-370-01) </PackageDescription>
<NDC11Code>70748-0370-02</NDC11Code>
<ProductNDC>70748-370</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sugammadex</ProprietaryName>
<NonProprietaryName>Sugammadex</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214338</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SUGAMMADEX SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>gamma-Cyclodextrins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>70748-371-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70748-371-02) / 5 mL in 1 VIAL, SINGLE-DOSE (70748-371-01) </PackageDescription>
<NDC11Code>70748-0371-02</NDC11Code>
<ProductNDC>70748-371</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sugammadex</ProprietaryName>
<NonProprietaryName>Sugammadex</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214338</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SUGAMMADEX SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>gamma-Cyclodextrins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0703-3678-81</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0703-3678-81) > 40 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00703-3678-81</NDC11Code>
<ProductNDC>0703-3678</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS</RouteName>
<StartMarketingDate>20151214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040843</ApplicationNumber>
<LabelerName>Teva Parenteral Medicines, Inc.</LabelerName>
<SubstanceName>METHOTREXATE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:Treatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen (1.1)Prophylaxis and treatment of adult and pediatric patients with meningeal leukemia (1.2)Treatment of adult and pediatric patients with non-Hodgkin lymphoma (1.3) Treatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen (1.4)Treatment of adults with breast cancer as part of a combination chemotherapy regimen (1.5)Treatment of adults with squamous cell carcinoma of the head and neck as single-agent (1.6)Treatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen (1.7) Treatment of adults with rheumatoid arthritis (RA). (1.8)Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9)Treatment of adults with severe psoriasis. (1.10).</IndicationAndUsage>
<Description>Methotrexate, USP (formerly Amethopterin) is a folate analog metabolic inhibitor used in the treatment of certain neoplastic diseases, severe psoriasis, and adult rheumatoid arthritis. Chemically methotrexate, USP is N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid. The structural formula is. C20H22N8O5 M.W. 454.45. Preservative-free Methotrexate Injection, USP is supplied in sterile single-dose vials for intravenous, intramuscular, subcutaneous, or intrathecal use. Methotrexate Injection, USP, Isotonic Liquid, Preservative Free is available in 1 gram/40 mL single-dose vials. : 1 Each 25 mg/mL, 40 mL vial contains 1,000 mg methotrexate, USP equivalent to 1,096.7 mg of methotrexate sodium, and the following inactive ingredients: sodium chloride 196 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>0904-6440-61</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0904-6440-61) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00904-6440-61</NDC11Code>
<ProductNDC>0904-6440</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>13537-196-06</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (13537-196-06) > 6 g in 1 BOTTLE (13537-196-05)</PackageDescription>
<NDC11Code>13537-0196-06</NDC11Code>
<ProductNDC>13537-196</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika 3-in-1 Pro Make Up Foundation Spf 20 Base De Maquillaje Para Rostro 3-en-1 Pro Fps 20</ProprietaryName>
<ProprietaryNameSuffix>(rose 3) - Rose</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Oxybenzone, And Titanium Dioxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140306</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>.07; .02; .02</StrengthNumber>
<StrengthUnit>g/g; g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>30142-196-26</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (30142-196-26) > 118 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>30142-0196-26</NDC11Code>
<ProductNDC>30142-196</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens Pain Relief Plus</ProprietaryName>
<ProprietaryNameSuffix>Cough And Sore Throat</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080825</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>160; 5</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>42507-196-26</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (42507-196-26) > 118 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>42507-0196-26</NDC11Code>
<ProductNDC>42507-196</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cough And Sore Throat</ProprietaryName>
<ProprietaryNameSuffix>Childrens Pain Relief</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081013</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>HyVee Inc</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>160; 5</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>43419-025-20</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (43419-025-20) > 10 g in 1 CONTAINER</PackageDescription>
<NDC11Code>43419-0025-20</NDC11Code>
<ProductNDC>43419-025</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sulwhasoo Evenfair Smoothing Foundation</ProprietaryName>
<ProprietaryNameSuffix>Spf25 No.2 Medium Beige</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Titanium Dioxide, And Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121123</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Amorepacific Corporation</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>.32; .4268; .196</StrengthNumber>
<StrengthUnit>g/10g; g/10g; g/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43419-026-20</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (43419-026-20) > 10 g in 1 CONTAINER</PackageDescription>
<NDC11Code>43419-0026-20</NDC11Code>
<ProductNDC>43419-026</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sulwhasoo Evenfair Smoothing Foundation</ProprietaryName>
<ProprietaryNameSuffix>Spf25 No.3 Medium Ocher</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Titanium Dioxide, And Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121123</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Amorepacific Corporation</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>.32; .4268; .196</StrengthNumber>
<StrengthUnit>g/10g; g/10g; g/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-4641-0</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (50090-4641-0) </PackageDescription>
<NDC11Code>50090-4641-00</NDC11Code>
<ProductNDC>50090-4641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-4641-4</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (50090-4641-4) </PackageDescription>
<NDC11Code>50090-4641-04</NDC11Code>
<ProductNDC>50090-4641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50742-246-18</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (50742-246-18) </PackageDescription>
<NDC11Code>50742-0246-18</NDC11Code>
<ProductNDC>50742-246</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate And Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate And Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215586</ApplicationNumber>
<LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE; ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>37.5; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC], Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate and hydralazine hydrochloride tablets is a combination of isosorbide dinitrate, a nitrate vasodilator, and hydralazine hydrochloride, an arteriolar vasodilator, indicated for:. ● the treatment of heart failure as an adjunct therapy to standard therapy in self-identified black patients to improve survival, prolong time to hospitalization for heart failure and to improve patient-reported functional status (1.1). Limitations of use:. ● There is little experience in patients with NYHA class IV heart failure (1.2).</IndicationAndUsage>
<Description>Isosorbide dinitrate and hydralazine hydrochloride tablets is a fixed-dose combination of isosorbide dinitrate, a vasodilator with effects on both arteries and veins, and hydralazine hydrochloride, a predominantly arterial vasodilator. Isosorbide dinitrate is described chemically as 1,4:3,6-dianhydro-D-glucitol dinitrate and its structural formula is. Isosorbide dinitrate is a white to off-white, crystalline powder with the empirical formula C6H8N2O8 and a molecular weight of 236.14. It is freely soluble in organic solvents such as alcohol, chloroform and ether, but is only sparingly soluble in water. Hydralazine hydrochloride is described chemically as 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Hydralazine hydrochloride is a white to off-white, crystalline powder with the empirical formula C8H8N4HCl and a molecular weight of 196.64. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. Each isosorbide dinitrate and hydralazine hydrochloride tablet for oral administration contains 20 mg of isosorbide dinitrate and 37.5 mg of hydralazine hydrochloride. The inactive ingredients in isosorbide dinitrate and hydralazine hydrochloride tablets include: microcrystalline cellulose, anhydrous lactose, hypromellose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, mannitol, FD&C yellow #6, stearic acid, triacetin, FDC red #40 and FDC blue #1.</Description>
</NDC>
<NDC>
<NDCCode>50742-246-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50742-246-90) </PackageDescription>
<NDC11Code>50742-0246-90</NDC11Code>
<ProductNDC>50742-246</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate And Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate And Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215586</ApplicationNumber>
<LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE; ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>37.5; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC], Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate and hydralazine hydrochloride tablets is a combination of isosorbide dinitrate, a nitrate vasodilator, and hydralazine hydrochloride, an arteriolar vasodilator, indicated for:. ● the treatment of heart failure as an adjunct therapy to standard therapy in self-identified black patients to improve survival, prolong time to hospitalization for heart failure and to improve patient-reported functional status (1.1). Limitations of use:. ● There is little experience in patients with NYHA class IV heart failure (1.2).</IndicationAndUsage>
<Description>Isosorbide dinitrate and hydralazine hydrochloride tablets is a fixed-dose combination of isosorbide dinitrate, a vasodilator with effects on both arteries and veins, and hydralazine hydrochloride, a predominantly arterial vasodilator. Isosorbide dinitrate is described chemically as 1,4:3,6-dianhydro-D-glucitol dinitrate and its structural formula is. Isosorbide dinitrate is a white to off-white, crystalline powder with the empirical formula C6H8N2O8 and a molecular weight of 236.14. It is freely soluble in organic solvents such as alcohol, chloroform and ether, but is only sparingly soluble in water. Hydralazine hydrochloride is described chemically as 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Hydralazine hydrochloride is a white to off-white, crystalline powder with the empirical formula C8H8N4HCl and a molecular weight of 196.64. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. Each isosorbide dinitrate and hydralazine hydrochloride tablet for oral administration contains 20 mg of isosorbide dinitrate and 37.5 mg of hydralazine hydrochloride. The inactive ingredients in isosorbide dinitrate and hydralazine hydrochloride tablets include: microcrystalline cellulose, anhydrous lactose, hypromellose, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, mannitol, FD&C yellow #6, stearic acid, triacetin, FDC red #40 and FDC blue #1.</Description>
</NDC>
</NDCList>