{
"NDC": [
{
"NDCCode": "70748-270-13",
"PackageDescription": "1 KIT in 1 BOX (70748-270-13) * 2 mL in 1 VIAL (70748-449-11) * 2 mL in 1 SYRINGE (70748-448-01) ",
"NDC11Code": "70748-0270-13",
"ProductNDC": "70748-270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "KIT",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211220",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2026-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone for extended-release injectable suspension is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of Bipolar I Disorder. (1.2).",
"Description": "Risperidone for extended-release injectable suspension contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4-Hpyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone for extended-release injectable suspension is a combination of extended-release microspheres for injection and diluent for parenteral use. The extended-release microspheres formulation is an off-white to slightly yellow, free flowing sterile powder that is available in dosage strengths of 25 mg, 37.5 mg or 50 mg risperidone per vial. Risperidone is micro-encapsulated in 7525 polylactide-co-glycolide (PLG) at a concentration of 381 mg risperidone per gram of microspheres. The diluent for parenteral use is a clear, colorless, sterile solution. Composition of the diluent includes 1 mg/mL citric acid anhydrous, 1.27 mg/mL disodium hydrogen phosphate dihydrate, 1 mg/mL polysorbate 20, 22.5 mg sodium carboxymethyl cellulose, 6 mg/mL sodium chloride, 0.54 mg/mL sodium hydroxide, and water for injection. The microspheres are suspended in the diluent prior to injection. Risperidone for extended-release injectable suspension is provided as a single dose pack, consisting of a vial containing the microspheres, a pre-filled syringe containing the diluent, a vial adapter, and two Terumo SurGuard® 3 Needles (a 21 G UTW 1-inch needle with needle protection device for deltoid administration and a 20 G TW 2-inch needle with needle protection device for gluteal administration)."
},
{
"NDCCode": "70748-125-13",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70748-125-13) / 1 KIT in 1 BLISTER PACK",
"NDC11Code": "70748-0125-13",
"ProductNDC": "70748-125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Varenicline Tartrate",
"NonProprietaryName": "Varenicline Tartrate",
"DosageFormName": "KIT",
"StartMarketingDate": "20240320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211862",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2025-12-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240320",
"SamplePackage": "N",
"IndicationAndUsage": "Varenicline tablets are indicated for use as an aid to smoking cessation treatment.",
"Description": "Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α4β2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt, is a powder which is a white to light brown color powder with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano 6H-pyrazino[2,3 h][3]benzazepine, (2R,3R)-2,3-dihydroxybutanedioate (1:1). It is freely soluble in water. Varenicline tartrate has a molecular weight of 361.35 Daltons, and a molecular formula of C13H13N3 C4H6O6. The chemical structure is. Varenicline tablets are supplied for oral administration in two strengths: 0.5 mg white to off white, round, biconvex-coated tablets, debossed with \"T\" on one side and \"2\" on the other side and 1 mg yellow, round, biconvex-coated tablets, debossed with \"T\" on one side and \"1\" on the other side. Each 0.5 mg varenicline tablet contains 0.855 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablet contains 1.710 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: anhydrous dibasic calcium phosphate, croscarmellose sodium, hypromellose, magnesium stearate, maltodextrin, talc and titanium dioxide. The 1 mg tablet also contains iron oxide yellow."
},
{
"NDCCode": "70748-126-13",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (70748-126-13) / 56 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "70748-0126-13",
"ProductNDC": "70748-126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Varenicline",
"NonProprietaryName": "Varenicline",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211862",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "VARENICLINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240216",
"SamplePackage": "N",
"IndicationAndUsage": "Varenicline tablets are indicated for use as an aid to smoking cessation treatment.",
"Description": "Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α4β2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt, is a powder which is a white to light brown color powder with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano 6H-pyrazino[2,3 h][3]benzazepine, (2R,3R)-2,3-dihydroxybutanedioate (1:1). It is freely soluble in water. Varenicline tartrate has a molecular weight of 361.35 Daltons, and a molecular formula of C13H13N3 C4H6O6. The chemical structure is. Varenicline tablets are supplied for oral administration in two strengths: 0.5 mg white to off white, round, biconvex-coated tablets, debossed with \"T\" on one side and \"2\" on the other side and 1 mg yellow, round, biconvex-coated tablets, debossed with \"T\" on one side and \"1\" on the other side. Each 0.5 mg varenicline tablet contains 0.855 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablet contains 1.710 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: anhydrous dibasic calcium phosphate, croscarmellose sodium, hypromellose, magnesium stearate, maltodextrin, talc and titanium dioxide. The 1 mg tablet also contains iron oxide yellow."
},
{
"NDCCode": "70748-240-13",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (70748-240-13) / 1 KIT in 1 BLISTER PACK (70748-240-11) ",
"NDC11Code": "70748-0240-13",
"ProductNDC": "70748-240",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "KIT",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216063",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).",
"Description": "Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide."
},
{
"NDCCode": "70748-241-13",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (70748-241-13) / 1 KIT in 1 BLISTER PACK (70748-241-11) ",
"NDC11Code": "70748-0241-13",
"ProductNDC": "70748-241",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "KIT",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216063",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).",
"Description": "Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide."
},
{
"NDCCode": "70748-242-13",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (70748-242-13) / 1 KIT in 1 BLISTER PACK (70748-242-11) ",
"NDC11Code": "70748-0242-13",
"ProductNDC": "70748-242",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "KIT",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216063",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).",
"Description": "Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide."
},
{
"NDCCode": "70748-243-13",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (70748-243-13) / 1 KIT in 1 BLISTER PACK (70748-243-11) ",
"NDC11Code": "70748-0243-13",
"ProductNDC": "70748-243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "KIT",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216063",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).",
"Description": "Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide."
},
{
"NDCCode": "70748-244-13",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (70748-244-13) / 1 KIT in 1 BLISTER PACK (70748-244-11) ",
"NDC11Code": "70748-0244-13",
"ProductNDC": "70748-244",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolvaptan",
"NonProprietaryName": "Tolvaptan",
"DosageFormName": "KIT",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216063",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).",
"Description": "Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide."
},
{
"NDCCode": "70748-271-13",
"PackageDescription": "1 KIT in 1 BOX (70748-271-13) * 2 mL in 1 VIAL (70748-450-11) * 2 mL in 1 SYRINGE (70748-448-01) ",
"NDC11Code": "70748-0271-13",
"ProductNDC": "70748-271",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "KIT",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211220",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2026-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone for extended-release injectable suspension is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of Bipolar I Disorder. (1.2).",
"Description": "Risperidone for extended-release injectable suspension contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4-Hpyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone for extended-release injectable suspension is a combination of extended-release microspheres for injection and diluent for parenteral use. The extended-release microspheres formulation is an off-white to slightly yellow, free flowing sterile powder that is available in dosage strengths of 25 mg, 37.5 mg or 50 mg risperidone per vial. Risperidone is micro-encapsulated in 7525 polylactide-co-glycolide (PLG) at a concentration of 381 mg risperidone per gram of microspheres. The diluent for parenteral use is a clear, colorless, sterile solution. Composition of the diluent includes 1 mg/mL citric acid anhydrous, 1.27 mg/mL disodium hydrogen phosphate dihydrate, 1 mg/mL polysorbate 20, 22.5 mg sodium carboxymethyl cellulose, 6 mg/mL sodium chloride, 0.54 mg/mL sodium hydroxide, and water for injection. The microspheres are suspended in the diluent prior to injection. Risperidone for extended-release injectable suspension is provided as a single dose pack, consisting of a vial containing the microspheres, a pre-filled syringe containing the diluent, a vial adapter, and two Terumo SurGuard® 3 Needles (a 21 G UTW 1-inch needle with needle protection device for deltoid administration and a 20 G TW 2-inch needle with needle protection device for gluteal administration)."
},
{
"NDCCode": "70748-272-13",
"PackageDescription": "1 KIT in 1 BOX (70748-272-13) * 2 mL in 1 VIAL (70748-451-11) * 2 mL in 1 SYRINGE (70748-448-01) ",
"NDC11Code": "70748-0272-13",
"ProductNDC": "70748-272",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "KIT",
"StartMarketingDate": "20251017",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211220",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2026-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone for extended-release injectable suspension is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of Bipolar I Disorder. (1.2).",
"Description": "Risperidone for extended-release injectable suspension contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4-Hpyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone for extended-release injectable suspension is a combination of extended-release microspheres for injection and diluent for parenteral use. The extended-release microspheres formulation is an off-white to slightly yellow, free flowing sterile powder that is available in dosage strengths of 25 mg, 37.5 mg or 50 mg risperidone per vial. Risperidone is micro-encapsulated in 7525 polylactide-co-glycolide (PLG) at a concentration of 381 mg risperidone per gram of microspheres. The diluent for parenteral use is a clear, colorless, sterile solution. Composition of the diluent includes 1 mg/mL citric acid anhydrous, 1.27 mg/mL disodium hydrogen phosphate dihydrate, 1 mg/mL polysorbate 20, 22.5 mg sodium carboxymethyl cellulose, 6 mg/mL sodium chloride, 0.54 mg/mL sodium hydroxide, and water for injection. The microspheres are suspended in the diluent prior to injection. Risperidone for extended-release injectable suspension is provided as a single dose pack, consisting of a vial containing the microspheres, a pre-filled syringe containing the diluent, a vial adapter, and two Terumo SurGuard® 3 Needles (a 21 G UTW 1-inch needle with needle protection device for deltoid administration and a 20 G TW 2-inch needle with needle protection device for gluteal administration)."
},
{
"NDCCode": "21130-270-13",
"PackageDescription": "225 TABLET, COATED in 1 BOTTLE, PLASTIC (21130-270-13) ",
"NDC11Code": "21130-0270-13",
"ProductNDC": "21130-270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pain Relief Rapid Release Gelcaps",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150805",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Safeway",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180417",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to: the common coldheadachebackacheminor pain of arthritistoothachemuscular achespremenstrual and menstrual cramps. temporarily reduces fever."
},
{
"NDCCode": "50268-270-13",
"PackageDescription": "30 BLISTER PACK in 1 BOX (50268-270-13) / 1 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (50268-270-11) ",
"NDC11Code": "50268-0270-13",
"ProductNDC": "50268-270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220518",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204343",
"LabelerName": "AvPAK",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-10-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20220518",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: Major depressive disorder in adults Generalized anxiety disorder in adults and pediatric patients 7 years of age and older Diabetic peripheral neuropathic pain in adults Fibromyalgia in adults Chronic musculoskeletal pain in adults Additional pediatric use information is approved for Eli Lilly and Company, Inc.’s CYMBALTA (duloxetine) delayed-release capsules. However, due to Eli Lilly and Company Inc.’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.",
"Description": "Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (γS)-N-Methyl-γ-(1-napthalenyloxy)-2-thiophenepropanamine hydrochloride. The empirical formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.87. The structural formula is:. Duloxetine hydrochloride, USP is an off-white to white colored crystalline powder which is freely soluble in methanol and sparingly soluble in water. Each capsule contains film-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. Inactive ingredients include crospovidone, FD & C Blue 2, gelatin, hydroxy propyl methyl cellulose acetate succinate, hypromellose, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. In addition, the 20 mg and 60 mg capsules also contain iron oxide yellow. The imprinting ink contains propylene glycol, shellac, and strong ammonia solution. The 20 mg capsule also contains black iron oxide and potassium hydroxide. The 30 mg capsule also contains yellow iron oxide. The 60 mg capsule also contains potassium hydroxide and titanium dioxide."
},
{
"NDCCode": "54340-270-13",
"PackageDescription": "113 g in 1 PACKET (54340-270-13) ",
"NDC11Code": "54340-0270-13",
"ProductNDC": "54340-270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dial Complete Antibacterial Bar",
"ProprietaryNameSuffix": "Spring Water",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210308",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Henkel Corporation",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230131",
"SamplePackage": "N",
"IndicationAndUsage": "Use. For washing to decrease bacteria on the skin."
},
{
"NDCCode": "54340-270-25",
"PackageDescription": "36 PACKET in 1 CARTON (54340-270-25) / 113 g in 1 PACKET (54340-270-13) ",
"NDC11Code": "54340-0270-25",
"ProductNDC": "54340-270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dial Complete Antibacterial Bar",
"ProprietaryNameSuffix": "Spring Water",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210308",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Henkel Corporation",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220108",
"SamplePackage": "N",
"IndicationAndUsage": "Use. For washing to decrease bacteria on the skin."
},
{
"NDCCode": "59779-270-01",
"PackageDescription": "13.3 g in 1 BOTTLE (59779-270-01) ",
"NDC11Code": "59779-0270-01",
"ProductNDC": "59779-270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Baby Pure Gentle Sunstick Spf 60",
"ProprietaryNameSuffix": "Cvs",
"NonProprietaryName": "Titanium Dioxide 6.00% Zinc Oxide 4.70%",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20141117",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "CVS",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "6; 4.7",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20141117",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn."
},
{
"NDCCode": "69540-0036-4",
"PackageDescription": "270 PATCH in 1 CANISTER (69540-0036-4) / .13 g in 1 PATCH",
"NDC11Code": "69540-0036-04",
"ProductNDC": "69540-0036",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clorox Hand Sanitizer",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210824",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Brand Buzz LLC",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".13",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210824",
"SamplePackage": "N",
"IndicationAndUsage": "Hand sanitizing to help reduce bacteria on the skin."
},
{
"NDCCode": "70341-270-01",
"PackageDescription": "13 g in 1 CARTON (70341-270-01)",
"NDC11Code": "70341-0270-01",
"ProductNDC": "70341-270",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Eco Soul Power Proof Cooling Bb Cushion 01 Aqua Beige",
"NonProprietaryName": "Titanium Dioxide, Octinoxate, Octisalate, Zinc Oxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "The Saem International Co., Ltd.",
"SubstanceName": "TITANIUM DIOXIDE; OCTINOXATE; OCTISALATE; ZINC OXIDE",
"StrengthNumber": "1.17; .91; .62; .26",
"StrengthUnit": "g/13g; g/13g; g/13g; g/13g",
"Status": "Deprecated",
"LastUpdate": "2018-12-28",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "72915-301-13",
"PackageDescription": "270 TABLET, FILM COATED in 1 BOTTLE (72915-301-13) ",
"NDC11Code": "72915-0301-13",
"ProductNDC": "72915-301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevelamer Carbonate",
"NonProprietaryName": "Sevelamer Carbonate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20231229",
"EndMarketingDate": "20240411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212970",
"LabelerName": "Anxin Pharma Inc.",
"SubstanceName": "SEVELAMER CARBONATE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20231229",
"EndMarketingDatePackage": "20240411",
"SamplePackage": "N"
},
{
"NDCCode": "73069-270-13",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 BOX (73069-270-13) > 1 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "73069-0270-13",
"ProductNDC": "73069-270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Viatrexx-ithurts",
"NonProprietaryName": "Anti-interleukin-1.alpha. Apomorphine, Metenkefalin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "VIATREXX BIO INCORPORATED",
"SubstanceName": "ANTI-INTERLEUKIN-1.ALPHA. IMMUNOGLOBULIN G RABBIT; APOMORPHINE; BETA-ENDORPHIN HUMAN",
"StrengthNumber": "201; 201; 201",
"StrengthUnit": "[kp_C]/mL; [kp_C]/mL; [kp_C]/mL",
"Pharm_Classes": "Dopamine Agonists [MoA],Dopaminergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190506",
"SamplePackage": "N"
},
{
"NDCCode": "70748-129-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-129-06) ",
"NDC11Code": "70748-0129-06",
"ProductNDC": "70748-129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leflunomide",
"NonProprietaryName": "Leflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211863",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LEFLUNOMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200831",
"SamplePackage": "N",
"IndicationAndUsage": "Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).",
"Description": "Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only)."
},
{
"NDCCode": "70748-130-06",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-130-06) ",
"NDC11Code": "70748-0130-06",
"ProductNDC": "70748-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leflunomide",
"NonProprietaryName": "Leflunomide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211863",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LEFLUNOMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200831",
"SamplePackage": "N",
"IndicationAndUsage": "Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).",
"Description": "Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only)."
},
{
"NDCCode": "70748-299-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-299-01) > 210 mL in 1 BOTTLE",
"NDC11Code": "70748-0299-01",
"ProductNDC": "70748-299",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atovaquone",
"NonProprietaryName": "Atovaquone",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210692",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "ATOVAQUONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Antimalarial [EPC], Antiprotozoal [EPC]",
"Status": "Active",
"LastUpdate": "2021-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "Atovaquone oral suspension is a quinone antimicrobial drug indicated for: 1 Prevention of Pneumocystis jirovecii pneumonia (PCP) in adults and adolescents aged 13 years and older who cannot tolerate trimethoprim-sulfamethoxazole (TMP-SMX). (1.1), 2 Treatment of mild-to-moderate PCP in adults and adolescents aged 13 years and older who cannot tolerate TMP-SMX. (1.2).",
"Description": "Atovaquone oral suspension is a quinone antimicrobial drug. The chemical name of atovaquone is 1,4-Naphthalenedione, 2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-, trans. Atovaquone USP is a yellow colored powder that is freely soluble in tetrahydrofuran, soluble in chloroform and sparingly soluble in acetone. It has a molecular weight of 366.84 and the molecular formula C22H19ClO3. The compound has the following structural formula. Atovaquone oral suspension, USP is a formulation of micro-fine particles of atovaquone USP. Each 5 mL of atovaquone oral suspension, USP contains 750 mg of atovaquone USP and the inactive ingredients benzyl alcohol, flavor, hypromellose, poloxamer, purified water, saccharin sodium, and xanthan gum."
},
{
"NDCCode": "70748-322-14",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (70748-322-14) / 1 KIT in 1 BLISTER PACK",
"NDC11Code": "70748-0322-14",
"ProductNDC": "70748-322",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minzoya",
"NonProprietaryName": "Levonorgestrel And Ethinyl Estradiol And Ferrous Bisglycinate",
"DosageFormName": "KIT",
"StartMarketingDate": "20250109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217087",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"Status": "Active",
"LastUpdate": "2025-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250109",
"SamplePackage": "N",
"IndicationAndUsage": "Minzoya is indicated for use by females of reproductive potential to prevent pregnancy.",
"Description": "Minzoya (levonorgestrel and ethinyl estradiol tablets USP and ferrous bisglycinate tablets) provides an oral contraceptive regimen consisting of 21 white to off-white active tablets and 7 blue inactive tablets. : 1 21 white to off-white active tablets each containing 0.1 mg of levonorgestrel, 13-Ethyl-17-hydroxy- 18,19-dinor-17 α-pregn-4-en-20-yn-3-one, a totally synthetic progestogen, and 0.02 mg of ethinyl estradiol, 19-norpregna-1,3,5(10)-tien-20-yne-3,17-diol,(17α), an estrogenic compound, 2 7 blue inactive tablets each containing 36.5 mg ferrous bisglycinate."
},
{
"NDCCode": "70748-336-01",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (70748-336-01) / 345 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "70748-0336-01",
"ProductNDC": "70748-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide",
"NonProprietaryName": "Ipratropium Bromide",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20250703",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217912",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE",
"StrengthNumber": "21",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250703",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium bromide nasal solution, 0.03% is indicated for the symptomatic relief of rhinorrhea associated with allergic and nonallergic perennial rhinitis in adults and children age 6 years and older. Ipratropium bromide 0.03% does not relieve nasal congestion, sneezing, or postnasal drip associated with allergic or nonallergic perennial rhinitis.",
"Description": "The active ingredient in ipratropium bromide nasal solution is ipratropium bromide, USP (as the monohydrate). It is an anticholinergic agent chemically described as 8-azoniabicyclo (3.2.1) octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide monohydrate, (3-endo, 8-syn)-: a synthetic quaternary ammonium compound, chemically related to atropine. The structural formula is. Ipratropium bromide, USP is a white to off-white, crystalline powder. It is soluble in water, freely soluble in methanol and slightly soluble in ethanol (96%). Ipratropium bromide nasal solution, 0.03% is a metered-dose, manual pump spray unit which delivers 21 mcg (70 mcL) ipratropium bromide, USP (on an anhydrous basis) per spray (70 mcL) in an isotonic, aqueous solution with pH-adjusted to 4.7 with hydrochloric acid and sodium hydroxide (if needed). It also contains benzalkonium chloride, edetate disodium, purified water and sodium chloride. Each bottle contains 345 metered sprays."
},
{
"NDCCode": "70748-337-01",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (70748-337-01) / 165 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "70748-0337-01",
"ProductNDC": "70748-337",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide",
"NonProprietaryName": "Ipratropium Bromide",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20250703",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217886",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE",
"StrengthNumber": "42",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250703",
"SamplePackage": "N",
"IndicationAndUsage": "Ipratropium bromide nasal solution, 0.06% is indicated for the symptomatic relief of rhinorrhea associated with the common cold or seasonal allergic rhinitis for adults and children age 5 years and older. Ipratropium bromide 0.06% does not relieve nasal congestion or sneezing associated with the common cold or seasonal allergic rhinitis. The safety and effectiveness of the use of ipratropium bromide 0.06% beyond four days in patients with the common cold or beyond three weeks in patients with seasonal allergic rhinitis has not been established.",
"Description": "The active ingredient in ipratropium bromide nasal solution is ipratropium bromide, USP (as the monohydrate). It is an anticholinergic agent chemically described as 8-azoniabicyclo (3.2.1) octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide, monohydrate (endo,syn)-, (±)-: a synthetic quaternary ammonium compound, chemically related to atropine. Its structural formula is. Ipratropium bromide, USP is a white to off-white, crystalline powder. It is soluble in water, freely soluble in methanol and slightly soluble in ethanol (96%). Ipratropium bromide nasal solution, 0.06% is a metered-dose, manual pump spray unit which delivers 42 mcg ipratropium bromide, USP (on an anhydrous basis) per spray (70 mcL) in an isotonic, aqueous solution with pH-adjusted to 4.7 with hydrochloric acid and sodium hydroxide (if needed). It also contains benzalkonium chloride, edetate disodium, purified water and sodium chloride. Each bottle contains 165 metered sprays."
},
{
"NDCCode": "70748-389-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-389-01) ",
"NDC11Code": "70748-0389-01",
"ProductNDC": "70748-389",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prucalopride",
"NonProprietaryName": "Prucalopride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218847",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "PRUCALOPRIDE SUCCINATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Prucalopride tablets are indicated for the treatment of chronic idiopathic constipation (CIC) in adults.",
"Description": "Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-Amino-5-chloro -N- [1-(3-methoxy propyl)piperidin-4-yl] -2, 3- dihydro -1- benzofuran -7-carboxamide succinate.. The molecular formula is C22H32CIN3O7 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to almost white powder. It is highly soluble in acidic aqueous media and alkaline aqueous media up to a pH of approximately 9. Each 1-mg film-coated tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous. The coating for the 1-mg tablet contains hypromellose, iron oxide yellow, lactose monohydrate, talc, titanium dioxide and triacetin. Each 2-mg film-coated tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous.. The coating for the 2-mg tablet contains hypromellose, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "70748-390-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70748-390-01) ",
"NDC11Code": "70748-0390-01",
"ProductNDC": "70748-390",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prucalopride",
"NonProprietaryName": "Prucalopride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218847",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "PRUCALOPRIDE SUCCINATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Prucalopride tablets are indicated for the treatment of chronic idiopathic constipation (CIC) in adults.",
"Description": "Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-Amino-5-chloro -N- [1-(3-methoxy propyl)piperidin-4-yl] -2, 3- dihydro -1- benzofuran -7-carboxamide succinate.. The molecular formula is C22H32CIN3O7 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to almost white powder. It is highly soluble in acidic aqueous media and alkaline aqueous media up to a pH of approximately 9. Each 1-mg film-coated tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous. The coating for the 1-mg tablet contains hypromellose, iron oxide yellow, lactose monohydrate, talc, titanium dioxide and triacetin. Each 2-mg film-coated tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous.. The coating for the 2-mg tablet contains hypromellose, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "0074-4456-04",
"PackageDescription": "250 mL in 1 BOTTLE, PLASTIC (0074-4456-04) ",
"NDC11Code": "00074-4456-04",
"ProductNDC": "0074-4456",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultane",
"NonProprietaryName": "Sevoflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19950607",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020478",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "SEVOFLURANE",
"StrengthNumber": "250",
"StrengthUnit": "mL/250mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19950607",
"SamplePackage": "N",
"IndicationAndUsage": "ULTANE is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. ULTANE should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
"Description": "ULTANE (sevoflurane), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
},
{
"NDCCode": "0074-4456-51",
"PackageDescription": "250 mL in 1 BOTTLE, PLASTIC (0074-4456-51) ",
"NDC11Code": "00074-4456-51",
"ProductNDC": "0074-4456",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ultane",
"NonProprietaryName": "Sevoflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19950607",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020478",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "SEVOFLURANE",
"StrengthNumber": "250",
"StrengthUnit": "mL/250mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19950607",
"SamplePackage": "N",
"IndicationAndUsage": "ULTANE is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. ULTANE should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
"Description": "ULTANE (sevoflurane), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
},
{
"NDCCode": "0378-2820-27",
"PackageDescription": "270 TABLET in 1 BOTTLE, PLASTIC (0378-2820-27)",
"NDC11Code": "00378-2820-27",
"ProductNDC": "0378-2820",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acarbose",
"NonProprietaryName": "Acarbose",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091053",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ACARBOSE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "alpha Glucosidase Inhibitors [MoA],alpha-Glucosidase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2015-02-13"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70748-270-13</NDCCode>
<PackageDescription>1 KIT in 1 BOX (70748-270-13) * 2 mL in 1 VIAL (70748-449-11) * 2 mL in 1 SYRINGE (70748-448-01) </PackageDescription>
<NDC11Code>70748-0270-13</NDC11Code>
<ProductNDC>70748-270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211220</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone for extended-release injectable suspension is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of Bipolar I Disorder. (1.2).</IndicationAndUsage>
<Description>Risperidone for extended-release injectable suspension contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4-Hpyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone for extended-release injectable suspension is a combination of extended-release microspheres for injection and diluent for parenteral use. The extended-release microspheres formulation is an off-white to slightly yellow, free flowing sterile powder that is available in dosage strengths of 25 mg, 37.5 mg or 50 mg risperidone per vial. Risperidone is micro-encapsulated in 7525 polylactide-co-glycolide (PLG) at a concentration of 381 mg risperidone per gram of microspheres. The diluent for parenteral use is a clear, colorless, sterile solution. Composition of the diluent includes 1 mg/mL citric acid anhydrous, 1.27 mg/mL disodium hydrogen phosphate dihydrate, 1 mg/mL polysorbate 20, 22.5 mg sodium carboxymethyl cellulose, 6 mg/mL sodium chloride, 0.54 mg/mL sodium hydroxide, and water for injection. The microspheres are suspended in the diluent prior to injection. Risperidone for extended-release injectable suspension is provided as a single dose pack, consisting of a vial containing the microspheres, a pre-filled syringe containing the diluent, a vial adapter, and two Terumo SurGuard® 3 Needles (a 21 G UTW 1-inch needle with needle protection device for deltoid administration and a 20 G TW 2-inch needle with needle protection device for gluteal administration).</Description>
</NDC>
<NDC>
<NDCCode>70748-125-13</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70748-125-13) / 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70748-0125-13</NDC11Code>
<ProductNDC>70748-125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Varenicline Tartrate</ProprietaryName>
<NonProprietaryName>Varenicline Tartrate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211862</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-12-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Varenicline tablets are indicated for use as an aid to smoking cessation treatment.</IndicationAndUsage>
<Description>Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α4β2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt, is a powder which is a white to light brown color powder with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano 6H-pyrazino[2,3 h][3]benzazepine, (2R,3R)-2,3-dihydroxybutanedioate (1:1). It is freely soluble in water. Varenicline tartrate has a molecular weight of 361.35 Daltons, and a molecular formula of C13H13N3 C4H6O6. The chemical structure is. Varenicline tablets are supplied for oral administration in two strengths: 0.5 mg white to off white, round, biconvex-coated tablets, debossed with "T" on one side and "2" on the other side and 1 mg yellow, round, biconvex-coated tablets, debossed with "T" on one side and "1" on the other side. Each 0.5 mg varenicline tablet contains 0.855 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablet contains 1.710 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: anhydrous dibasic calcium phosphate, croscarmellose sodium, hypromellose, magnesium stearate, maltodextrin, talc and titanium dioxide. The 1 mg tablet also contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70748-126-13</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (70748-126-13) / 56 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70748-0126-13</NDC11Code>
<ProductNDC>70748-126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Varenicline</ProprietaryName>
<NonProprietaryName>Varenicline</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211862</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VARENICLINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Varenicline tablets are indicated for use as an aid to smoking cessation treatment.</IndicationAndUsage>
<Description>Varenicline tablets contain varenicline (as the tartrate salt), which is a partial nicotinic agonist selective for α4β2 nicotinic acetylcholine receptor subtypes. Varenicline, as the tartrate salt, is a powder which is a white to light brown color powder with the following chemical name: 7,8,9,10-tetrahydro-6,10-methano 6H-pyrazino[2,3 h][3]benzazepine, (2R,3R)-2,3-dihydroxybutanedioate (1:1). It is freely soluble in water. Varenicline tartrate has a molecular weight of 361.35 Daltons, and a molecular formula of C13H13N3 C4H6O6. The chemical structure is. Varenicline tablets are supplied for oral administration in two strengths: 0.5 mg white to off white, round, biconvex-coated tablets, debossed with "T" on one side and "2" on the other side and 1 mg yellow, round, biconvex-coated tablets, debossed with "T" on one side and "1" on the other side. Each 0.5 mg varenicline tablet contains 0.855 mg of varenicline tartrate equivalent to 0.5 mg of varenicline free base; each 1 mg varenicline tablet contains 1.710 mg of varenicline tartrate equivalent to 1 mg of varenicline free base. The following inactive ingredients are included in the tablets: anhydrous dibasic calcium phosphate, croscarmellose sodium, hypromellose, magnesium stearate, maltodextrin, talc and titanium dioxide. The 1 mg tablet also contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>70748-240-13</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (70748-240-13) / 1 KIT in 1 BLISTER PACK (70748-240-11) </PackageDescription>
<NDC11Code>70748-0240-13</NDC11Code>
<ProductNDC>70748-240</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216063</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).</IndicationAndUsage>
<Description>Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-241-13</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (70748-241-13) / 1 KIT in 1 BLISTER PACK (70748-241-11) </PackageDescription>
<NDC11Code>70748-0241-13</NDC11Code>
<ProductNDC>70748-241</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216063</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).</IndicationAndUsage>
<Description>Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-242-13</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (70748-242-13) / 1 KIT in 1 BLISTER PACK (70748-242-11) </PackageDescription>
<NDC11Code>70748-0242-13</NDC11Code>
<ProductNDC>70748-242</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216063</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).</IndicationAndUsage>
<Description>Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-243-13</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (70748-243-13) / 1 KIT in 1 BLISTER PACK (70748-243-11) </PackageDescription>
<NDC11Code>70748-0243-13</NDC11Code>
<ProductNDC>70748-243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216063</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).</IndicationAndUsage>
<Description>Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-244-13</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (70748-244-13) / 1 KIT in 1 BLISTER PACK (70748-244-11) </PackageDescription>
<NDC11Code>70748-0244-13</NDC11Code>
<ProductNDC>70748-244</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolvaptan</ProprietaryName>
<NonProprietaryName>Tolvaptan</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216063</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolvaptan tablets are indicated to slow kidney function decline in adults at risk of rapidly progressing autosomal dominant polycystic kidney disease (ADPKD).</IndicationAndUsage>
<Description>Tolvaptan tablets contain tolvaptan, a selective vasopressin V2-receptor antagonist in immediate release tablets for oral administration available in 15 mg, 30 mg, 45 mg, 60 mg and 90 mg strengths. Tolvaptan is N-(4-(7-chloro-5-hydroxy-2, 3, 4, 5 - tetrahydro-1H-benzo[b]azepine-1-carbonyl)-3-methylphenyl)-2-methylbenzamide. The empirical formula is C26H25ClN2O3. Molecular weight is 448.9. The chemical structure is. Inactive ingredients include corn starch, hydroxy propyl cellulose, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose and red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-271-13</NDCCode>
<PackageDescription>1 KIT in 1 BOX (70748-271-13) * 2 mL in 1 VIAL (70748-450-11) * 2 mL in 1 SYRINGE (70748-448-01) </PackageDescription>
<NDC11Code>70748-0271-13</NDC11Code>
<ProductNDC>70748-271</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211220</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone for extended-release injectable suspension is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of Bipolar I Disorder. (1.2).</IndicationAndUsage>
<Description>Risperidone for extended-release injectable suspension contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4-Hpyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone for extended-release injectable suspension is a combination of extended-release microspheres for injection and diluent for parenteral use. The extended-release microspheres formulation is an off-white to slightly yellow, free flowing sterile powder that is available in dosage strengths of 25 mg, 37.5 mg or 50 mg risperidone per vial. Risperidone is micro-encapsulated in 7525 polylactide-co-glycolide (PLG) at a concentration of 381 mg risperidone per gram of microspheres. The diluent for parenteral use is a clear, colorless, sterile solution. Composition of the diluent includes 1 mg/mL citric acid anhydrous, 1.27 mg/mL disodium hydrogen phosphate dihydrate, 1 mg/mL polysorbate 20, 22.5 mg sodium carboxymethyl cellulose, 6 mg/mL sodium chloride, 0.54 mg/mL sodium hydroxide, and water for injection. The microspheres are suspended in the diluent prior to injection. Risperidone for extended-release injectable suspension is provided as a single dose pack, consisting of a vial containing the microspheres, a pre-filled syringe containing the diluent, a vial adapter, and two Terumo SurGuard® 3 Needles (a 21 G UTW 1-inch needle with needle protection device for deltoid administration and a 20 G TW 2-inch needle with needle protection device for gluteal administration).</Description>
</NDC>
<NDC>
<NDCCode>70748-272-13</NDCCode>
<PackageDescription>1 KIT in 1 BOX (70748-272-13) * 2 mL in 1 VIAL (70748-451-11) * 2 mL in 1 SYRINGE (70748-448-01) </PackageDescription>
<NDC11Code>70748-0272-13</NDC11Code>
<ProductNDC>70748-272</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20251017</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211220</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone for extended-release injectable suspension is an atypical antipsychotic indicated: 1 for the treatment of schizophrenia. (1.1), 2 as monotherapy or as adjunctive therapy to lithium or valproate for the maintenance treatment of Bipolar I Disorder. (1.2).</IndicationAndUsage>
<Description>Risperidone for extended-release injectable suspension contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4-Hpyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone for extended-release injectable suspension is a combination of extended-release microspheres for injection and diluent for parenteral use. The extended-release microspheres formulation is an off-white to slightly yellow, free flowing sterile powder that is available in dosage strengths of 25 mg, 37.5 mg or 50 mg risperidone per vial. Risperidone is micro-encapsulated in 7525 polylactide-co-glycolide (PLG) at a concentration of 381 mg risperidone per gram of microspheres. The diluent for parenteral use is a clear, colorless, sterile solution. Composition of the diluent includes 1 mg/mL citric acid anhydrous, 1.27 mg/mL disodium hydrogen phosphate dihydrate, 1 mg/mL polysorbate 20, 22.5 mg sodium carboxymethyl cellulose, 6 mg/mL sodium chloride, 0.54 mg/mL sodium hydroxide, and water for injection. The microspheres are suspended in the diluent prior to injection. Risperidone for extended-release injectable suspension is provided as a single dose pack, consisting of a vial containing the microspheres, a pre-filled syringe containing the diluent, a vial adapter, and two Terumo SurGuard® 3 Needles (a 21 G UTW 1-inch needle with needle protection device for deltoid administration and a 20 G TW 2-inch needle with needle protection device for gluteal administration).</Description>
</NDC>
<NDC>
<NDCCode>21130-270-13</NDCCode>
<PackageDescription>225 TABLET, COATED in 1 BOTTLE, PLASTIC (21130-270-13) </PackageDescription>
<NDC11Code>21130-0270-13</NDC11Code>
<ProductNDC>21130-270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pain Relief Rapid Release Gelcaps</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150805</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Safeway</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to: the common coldheadachebackacheminor pain of arthritistoothachemuscular achespremenstrual and menstrual cramps. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50268-270-13</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 BOX (50268-270-13) / 1 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (50268-270-11) </PackageDescription>
<NDC11Code>50268-0270-13</NDC11Code>
<ProductNDC>50268-270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220518</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204343</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: Major depressive disorder in adults Generalized anxiety disorder in adults and pediatric patients 7 years of age and older Diabetic peripheral neuropathic pain in adults Fibromyalgia in adults Chronic musculoskeletal pain in adults Additional pediatric use information is approved for Eli Lilly and Company, Inc.’s CYMBALTA (duloxetine) delayed-release capsules. However, due to Eli Lilly and Company Inc.’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules, USP are a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (γS)-N-Methyl-γ-(1-napthalenyloxy)-2-thiophenepropanamine hydrochloride. The empirical formula is C 18H 19NOSHCl, which corresponds to a molecular weight of 333.87. The structural formula is:. Duloxetine hydrochloride, USP is an off-white to white colored crystalline powder which is freely soluble in methanol and sparingly soluble in water. Each capsule contains film-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. Inactive ingredients include crospovidone, FD & C Blue 2, gelatin, hydroxy propyl methyl cellulose acetate succinate, hypromellose, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. In addition, the 20 mg and 60 mg capsules also contain iron oxide yellow. The imprinting ink contains propylene glycol, shellac, and strong ammonia solution. The 20 mg capsule also contains black iron oxide and potassium hydroxide. The 30 mg capsule also contains yellow iron oxide. The 60 mg capsule also contains potassium hydroxide and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54340-270-13</NDCCode>
<PackageDescription>113 g in 1 PACKET (54340-270-13) </PackageDescription>
<NDC11Code>54340-0270-13</NDC11Code>
<ProductNDC>54340-270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dial Complete Antibacterial Bar</ProprietaryName>
<ProprietaryNameSuffix>Spring Water</ProprietaryNameSuffix>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210308</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Henkel Corporation</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use. For washing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54340-270-25</NDCCode>
<PackageDescription>36 PACKET in 1 CARTON (54340-270-25) / 113 g in 1 PACKET (54340-270-13) </PackageDescription>
<NDC11Code>54340-0270-25</NDC11Code>
<ProductNDC>54340-270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dial Complete Antibacterial Bar</ProprietaryName>
<ProprietaryNameSuffix>Spring Water</ProprietaryNameSuffix>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210308</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Henkel Corporation</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use. For washing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59779-270-01</NDCCode>
<PackageDescription>13.3 g in 1 BOTTLE (59779-270-01) </PackageDescription>
<NDC11Code>59779-0270-01</NDC11Code>
<ProductNDC>59779-270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Baby Pure Gentle Sunstick Spf 60</ProprietaryName>
<ProprietaryNameSuffix>Cvs</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide 6.00% Zinc Oxide 4.70%</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20141117</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>CVS</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>6; 4.7</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69540-0036-4</NDCCode>
<PackageDescription>270 PATCH in 1 CANISTER (69540-0036-4) / .13 g in 1 PATCH</PackageDescription>
<NDC11Code>69540-0036-04</NDC11Code>
<ProductNDC>69540-0036</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clorox Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210824</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Brand Buzz LLC</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.13</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210824</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand sanitizing to help reduce bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70341-270-01</NDCCode>
<PackageDescription>13 g in 1 CARTON (70341-270-01)</PackageDescription>
<NDC11Code>70341-0270-01</NDC11Code>
<ProductNDC>70341-270</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Eco Soul Power Proof Cooling Bb Cushion 01 Aqua Beige</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Octinoxate, Octisalate, Zinc Oxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>The Saem International Co., Ltd.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; OCTINOXATE; OCTISALATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>1.17; .91; .62; .26</StrengthNumber>
<StrengthUnit>g/13g; g/13g; g/13g; g/13g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-12-28</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>72915-301-13</NDCCode>
<PackageDescription>270 TABLET, FILM COATED in 1 BOTTLE (72915-301-13) </PackageDescription>
<NDC11Code>72915-0301-13</NDC11Code>
<ProductNDC>72915-301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevelamer Carbonate</ProprietaryName>
<NonProprietaryName>Sevelamer Carbonate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231229</StartMarketingDate>
<EndMarketingDate>20240411</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212970</ApplicationNumber>
<LabelerName>Anxin Pharma Inc.</LabelerName>
<SubstanceName>SEVELAMER CARBONATE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20231229</StartMarketingDatePackage>
<EndMarketingDatePackage>20240411</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>73069-270-13</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 BOX (73069-270-13) > 1 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>73069-0270-13</NDC11Code>
<ProductNDC>73069-270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Viatrexx-ithurts</ProprietaryName>
<NonProprietaryName>Anti-interleukin-1.alpha. Apomorphine, Metenkefalin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>VIATREXX BIO INCORPORATED</LabelerName>
<SubstanceName>ANTI-INTERLEUKIN-1.ALPHA. IMMUNOGLOBULIN G RABBIT; APOMORPHINE; BETA-ENDORPHIN HUMAN</SubstanceName>
<StrengthNumber>201; 201; 201</StrengthNumber>
<StrengthUnit>[kp_C]/mL; [kp_C]/mL; [kp_C]/mL</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Dopaminergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70748-129-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-129-06) </PackageDescription>
<NDC11Code>70748-0129-06</NDC11Code>
<ProductNDC>70748-129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leflunomide</ProprietaryName>
<NonProprietaryName>Leflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211863</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEFLUNOMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).</IndicationAndUsage>
<Description>Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only).</Description>
</NDC>
<NDC>
<NDCCode>70748-130-06</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-130-06) </PackageDescription>
<NDC11Code>70748-0130-06</NDC11Code>
<ProductNDC>70748-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leflunomide</ProprietaryName>
<NonProprietaryName>Leflunomide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211863</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEFLUNOMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Leflunomide is a pyrimidine synthesis inhibitor indicated for the treatment of adults with active rheumatoid arthritis. (1).</IndicationAndUsage>
<Description>Leflunomide USP is a pyrimidine synthesis inhibitor. The chemical name for leflunomide is N-(4´-trifluoromethylphenyl)-5-methylisoxazole-4-carboxamide. It has an empirical formula C12H9F3N2O2, a molecular weight of 270.2 and the following structural formula. Leflunomide USP is available for oral administration as film coated tablets containing 10 mg and 20 mg of active drug. Combined with leflunomide are the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, corn starch, HPMC 2910/Hypromellose USP (6 mPas), Titanium Dioxide USP, Macrogol/PEG 6000 NF, Talc USP and Iron Oxide Yellow NF (20 mg tablet only).</Description>
</NDC>
<NDC>
<NDCCode>70748-299-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-299-01) > 210 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0299-01</NDC11Code>
<ProductNDC>70748-299</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atovaquone</ProprietaryName>
<NonProprietaryName>Atovaquone</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210692</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATOVAQUONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antiprotozoal [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atovaquone oral suspension is a quinone antimicrobial drug indicated for: 1 Prevention of Pneumocystis jirovecii pneumonia (PCP) in adults and adolescents aged 13 years and older who cannot tolerate trimethoprim-sulfamethoxazole (TMP-SMX). (1.1), 2 Treatment of mild-to-moderate PCP in adults and adolescents aged 13 years and older who cannot tolerate TMP-SMX. (1.2).</IndicationAndUsage>
<Description>Atovaquone oral suspension is a quinone antimicrobial drug. The chemical name of atovaquone is 1,4-Naphthalenedione, 2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-, trans. Atovaquone USP is a yellow colored powder that is freely soluble in tetrahydrofuran, soluble in chloroform and sparingly soluble in acetone. It has a molecular weight of 366.84 and the molecular formula C22H19ClO3. The compound has the following structural formula. Atovaquone oral suspension, USP is a formulation of micro-fine particles of atovaquone USP. Each 5 mL of atovaquone oral suspension, USP contains 750 mg of atovaquone USP and the inactive ingredients benzyl alcohol, flavor, hypromellose, poloxamer, purified water, saccharin sodium, and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>70748-322-14</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (70748-322-14) / 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70748-0322-14</NDC11Code>
<ProductNDC>70748-322</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minzoya</ProprietaryName>
<NonProprietaryName>Levonorgestrel And Ethinyl Estradiol And Ferrous Bisglycinate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217087</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Minzoya is indicated for use by females of reproductive potential to prevent pregnancy.</IndicationAndUsage>
<Description>Minzoya (levonorgestrel and ethinyl estradiol tablets USP and ferrous bisglycinate tablets) provides an oral contraceptive regimen consisting of 21 white to off-white active tablets and 7 blue inactive tablets. : 1 21 white to off-white active tablets each containing 0.1 mg of levonorgestrel, 13-Ethyl-17-hydroxy- 18,19-dinor-17 α-pregn-4-en-20-yn-3-one, a totally synthetic progestogen, and 0.02 mg of ethinyl estradiol, 19-norpregna-1,3,5(10)-tien-20-yne-3,17-diol,(17α), an estrogenic compound, 2 7 blue inactive tablets each containing 36.5 mg ferrous bisglycinate.</Description>
</NDC>
<NDC>
<NDCCode>70748-336-01</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (70748-336-01) / 345 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>70748-0336-01</NDC11Code>
<ProductNDC>70748-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20250703</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217912</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE</SubstanceName>
<StrengthNumber>21</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium bromide nasal solution, 0.03% is indicated for the symptomatic relief of rhinorrhea associated with allergic and nonallergic perennial rhinitis in adults and children age 6 years and older. Ipratropium bromide 0.03% does not relieve nasal congestion, sneezing, or postnasal drip associated with allergic or nonallergic perennial rhinitis.</IndicationAndUsage>
<Description>The active ingredient in ipratropium bromide nasal solution is ipratropium bromide, USP (as the monohydrate). It is an anticholinergic agent chemically described as 8-azoniabicyclo (3.2.1) octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide monohydrate, (3-endo, 8-syn)-: a synthetic quaternary ammonium compound, chemically related to atropine. The structural formula is. Ipratropium bromide, USP is a white to off-white, crystalline powder. It is soluble in water, freely soluble in methanol and slightly soluble in ethanol (96%). Ipratropium bromide nasal solution, 0.03% is a metered-dose, manual pump spray unit which delivers 21 mcg (70 mcL) ipratropium bromide, USP (on an anhydrous basis) per spray (70 mcL) in an isotonic, aqueous solution with pH-adjusted to 4.7 with hydrochloric acid and sodium hydroxide (if needed). It also contains benzalkonium chloride, edetate disodium, purified water and sodium chloride. Each bottle contains 345 metered sprays.</Description>
</NDC>
<NDC>
<NDCCode>70748-337-01</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (70748-337-01) / 165 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>70748-0337-01</NDC11Code>
<ProductNDC>70748-337</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20250703</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217886</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE</SubstanceName>
<StrengthNumber>42</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250703</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ipratropium bromide nasal solution, 0.06% is indicated for the symptomatic relief of rhinorrhea associated with the common cold or seasonal allergic rhinitis for adults and children age 5 years and older. Ipratropium bromide 0.06% does not relieve nasal congestion or sneezing associated with the common cold or seasonal allergic rhinitis. The safety and effectiveness of the use of ipratropium bromide 0.06% beyond four days in patients with the common cold or beyond three weeks in patients with seasonal allergic rhinitis has not been established.</IndicationAndUsage>
<Description>The active ingredient in ipratropium bromide nasal solution is ipratropium bromide, USP (as the monohydrate). It is an anticholinergic agent chemically described as 8-azoniabicyclo (3.2.1) octane, 3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide, monohydrate (endo,syn)-, (±)-: a synthetic quaternary ammonium compound, chemically related to atropine. Its structural formula is. Ipratropium bromide, USP is a white to off-white, crystalline powder. It is soluble in water, freely soluble in methanol and slightly soluble in ethanol (96%). Ipratropium bromide nasal solution, 0.06% is a metered-dose, manual pump spray unit which delivers 42 mcg ipratropium bromide, USP (on an anhydrous basis) per spray (70 mcL) in an isotonic, aqueous solution with pH-adjusted to 4.7 with hydrochloric acid and sodium hydroxide (if needed). It also contains benzalkonium chloride, edetate disodium, purified water and sodium chloride. Each bottle contains 165 metered sprays.</Description>
</NDC>
<NDC>
<NDCCode>70748-389-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-389-01) </PackageDescription>
<NDC11Code>70748-0389-01</NDC11Code>
<ProductNDC>70748-389</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prucalopride</ProprietaryName>
<NonProprietaryName>Prucalopride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218847</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PRUCALOPRIDE SUCCINATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prucalopride tablets are indicated for the treatment of chronic idiopathic constipation (CIC) in adults.</IndicationAndUsage>
<Description>Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-Amino-5-chloro -N- [1-(3-methoxy propyl)piperidin-4-yl] -2, 3- dihydro -1- benzofuran -7-carboxamide succinate.. The molecular formula is C22H32CIN3O7 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to almost white powder. It is highly soluble in acidic aqueous media and alkaline aqueous media up to a pH of approximately 9. Each 1-mg film-coated tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous. The coating for the 1-mg tablet contains hypromellose, iron oxide yellow, lactose monohydrate, talc, titanium dioxide and triacetin. Each 2-mg film-coated tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous.. The coating for the 2-mg tablet contains hypromellose, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>70748-390-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70748-390-01) </PackageDescription>
<NDC11Code>70748-0390-01</NDC11Code>
<ProductNDC>70748-390</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prucalopride</ProprietaryName>
<NonProprietaryName>Prucalopride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218847</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PRUCALOPRIDE SUCCINATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 4 Receptor Agonists [MoA], Serotonin-4 Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prucalopride tablets are indicated for the treatment of chronic idiopathic constipation (CIC) in adults.</IndicationAndUsage>
<Description>Prucalopride tablets for oral use contain prucalopride succinate, a dihydrobenzofurancarboxamide that is a serotonin type 4 (5-HT4) receptor agonist. The IUPAC name is: 4-Amino-5-chloro -N- [1-(3-methoxy propyl)piperidin-4-yl] -2, 3- dihydro -1- benzofuran -7-carboxamide succinate.. The molecular formula is C22H32CIN3O7 and the molecular weight is 485.96. The structural formula is. Prucalopride succinate is a white to almost white powder. It is highly soluble in acidic aqueous media and alkaline aqueous media up to a pH of approximately 9. Each 1-mg film-coated tablet contains 1 mg of prucalopride (equivalent to 1.32 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous. The coating for the 1-mg tablet contains hypromellose, iron oxide yellow, lactose monohydrate, talc, titanium dioxide and triacetin. Each 2-mg film-coated tablet contains 2 mg of prucalopride (equivalent to 2.64 mg prucalopride succinate), and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose and silica, colloidal anhydrous.. The coating for the 2-mg tablet contains hypromellose, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>0074-4456-04</NDCCode>
<PackageDescription>250 mL in 1 BOTTLE, PLASTIC (0074-4456-04) </PackageDescription>
<NDC11Code>00074-4456-04</NDC11Code>
<ProductNDC>0074-4456</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultane</ProprietaryName>
<NonProprietaryName>Sevoflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19950607</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020478</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>SEVOFLURANE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mL/250mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19950607</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTANE is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. ULTANE should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
<Description>ULTANE (sevoflurane), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
</NDC>
<NDC>
<NDCCode>0074-4456-51</NDCCode>
<PackageDescription>250 mL in 1 BOTTLE, PLASTIC (0074-4456-51) </PackageDescription>
<NDC11Code>00074-4456-51</NDC11Code>
<ProductNDC>0074-4456</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ultane</ProprietaryName>
<NonProprietaryName>Sevoflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19950607</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020478</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>SEVOFLURANE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mL/250mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19950607</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ULTANE is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. ULTANE should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
<Description>ULTANE (sevoflurane), volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is:. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
</NDC>
<NDC>
<NDCCode>0378-2820-27</NDCCode>
<PackageDescription>270 TABLET in 1 BOTTLE, PLASTIC (0378-2820-27)</PackageDescription>
<NDC11Code>00378-2820-27</NDC11Code>
<ProductNDC>0378-2820</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acarbose</ProprietaryName>
<NonProprietaryName>Acarbose</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091053</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ACARBOSE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>alpha Glucosidase Inhibitors [MoA],alpha-Glucosidase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-02-13</LastUpdate>
</NDC>
</NDCList>