{
"NDC": [
{
"NDCCode": "70748-300-02",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-300-02) / 10 mL in 1 BOTTLE",
"NDC11Code": "70748-0300-02",
"ProductNDC": "70748-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215719",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid- responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti- inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white crystalline powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7 Mol. Wt. 466.95. Chemical Name. chloromethyl 17a-[(ethoxycarbonyl)oxy]-11β-hydroxyandrosta-1,4-diene-3-one-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 0.5% (5 mg). INACTIVES: Edetate disodium, glycerin, povidone, tyloxapol and water for injection. Hydrochloric Acid and/or sodium hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 350 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "70748-300-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-300-01) / 5 mL in 1 BOTTLE",
"NDC11Code": "70748-0300-01",
"ProductNDC": "70748-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215719",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250715",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid- responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti- inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white crystalline powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7 Mol. Wt. 466.95. Chemical Name. chloromethyl 17a-[(ethoxycarbonyl)oxy]-11β-hydroxyandrosta-1,4-diene-3-one-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 0.5% (5 mg). INACTIVES: Edetate disodium, glycerin, povidone, tyloxapol and water for injection. Hydrochloric Acid and/or sodium hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 350 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "70748-300-03",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-300-03) / 15 mL in 1 BOTTLE",
"NDC11Code": "70748-0300-03",
"ProductNDC": "70748-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20250701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215719",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250730",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid- responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti- inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white crystalline powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7 Mol. Wt. 466.95. Chemical Name. chloromethyl 17a-[(ethoxycarbonyl)oxy]-11β-hydroxyandrosta-1,4-diene-3-one-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 0.5% (5 mg). INACTIVES: Edetate disodium, glycerin, povidone, tyloxapol and water for injection. Hydrochloric Acid and/or sodium hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 350 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%."
},
{
"NDCCode": "70748-411-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-411-01) / 300 mL in 1 BOTTLE",
"NDC11Code": "70748-0411-01",
"ProductNDC": "70748-411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brivaracetam",
"NonProprietaryName": "Brivaracetam",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20260223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220164",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "BRIVARACETAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Epoxide Hydrolase Inhibitors [MoA]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260223",
"SamplePackage": "N",
"IndicationAndUsage": "Brivaracetam oral solution is indicated for the treatment of partial-onset seizures in patients 1 month of age and older.",
"Description": "The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyltetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a white to off-white crystalline powder. It is freely soluble in water, in ethanol, in methanol, in glacial acetic acid, in acetonitrile and in acetone. It is soluble in toluene. Oral Solution. Brivaracetam oral solution contains 10 mg of brivaracetam per mL. The inactive ingredients are sodium citrate (trisodium citrate dihydrate), anhydrous citric acid, methylparaben, sodium carboxymethylcellulose, sucralose, non-crystallizing sorbitol solution, anhydrous glycerol, raspberry flavor, and purified water. Raspberry flavor also contains maltodextrin, propylene glycol and modified waxy maize starch."
},
{
"NDCCode": "70748-105-02",
"PackageDescription": "500 TABLET in 1 BOTTLE (70748-105-02) ",
"NDC11Code": "70748-0105-02",
"ProductNDC": "70748-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin",
"NonProprietaryName": "Dapagliflozin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211531",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sodium-Glucose Cotransporter 2 Inhibitor [EPC],Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20181115",
"SamplePackage": "N"
},
{
"NDCCode": "70748-106-02",
"PackageDescription": "500 TABLET in 1 BOTTLE (70748-106-02) ",
"NDC11Code": "70748-0106-02",
"ProductNDC": "70748-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dapagliflozin",
"NonProprietaryName": "Dapagliflozin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211531",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DAPAGLIFLOZIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sodium-Glucose Cotransporter 2 Inhibitor [EPC],Sodium-Glucose Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20181115",
"SamplePackage": "N"
},
{
"NDCCode": "70748-186-02",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (70748-186-02) ",
"NDC11Code": "70748-0186-02",
"ProductNDC": "70748-186",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolate Mofetil",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20191001",
"EndMarketingDate": "20250731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210181",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191001",
"EndMarketingDatePackage": "20250731",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolate mofetil is an antimetabolite immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric recipients 3 months of age and older of allogeneic kidney, heart or liver transplants, in combination with other immunosuppressants. (1).",
"Description": "Mycophenolate mofetil, USP is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. Mycophenolate mofetil, USP is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP and tablets containing 500 mg of mycophenolate mofetil, USP. Inactive ingredients in Mycophenolate mofetil capsules USP, 250 mg include microcrystalline cellulose, hydroxypropyl cellulose, povidone (K-90), croscarmellose sodium, talc and magnesium stearate. The capsule shells contain FD&C blue #2, gelatin, red iron oxide, sodium lauryl sulfate, titanium dioxide and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, iron oxide black and potassium hydroxide. Mycophenolate Mofetil Capsules, USP meets USP Dissolution Test 2. Inactive ingredients in Mycophenolate mofetil tablets USP, 500 mg include Microcrystalline cellulose, Povidone, Croscarmellose sodium and Magnesium stearate. The film coating contains Hypromellose, Titanium dioxide, Polyethylene glycol, Iron oxide red, FD&C blue#2 aluminium lake and black iron oxide. Mycophenolate Mofetil Tablets, USP meets USP Dissolution Test 2."
},
{
"NDCCode": "70748-262-02",
"PackageDescription": "500 TABLET in 1 BOTTLE (70748-262-02) ",
"NDC11Code": "70748-0262-02",
"ProductNDC": "70748-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolate Mofetil",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201221",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212087",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20201221",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolate mofetil is an antimetabolite immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric recipients 3 months of age and older of allogeneic kidney, heart or liver transplants, in combination with other immunosuppressants. (1).",
"Description": "Mycophenolate mofetil, USP is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. Mycophenolate mofetil, USP is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP and tablets containing 500 mg of mycophenolate mofetil, USP. Inactive ingredients in Mycophenolate mofetil capsules USP, 250 mg include microcrystalline cellulose, hydroxypropyl cellulose, povidone (K-90), croscarmellose sodium, talc and magnesium stearate. The capsule shells contain FD&C blue #2, gelatin, red iron oxide, sodium lauryl sulfate, titanium dioxide and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, iron oxide black and potassium hydroxide. Mycophenolate Mofetil Capsules, USP meets USP Dissolution Test 2. Inactive ingredients in Mycophenolate mofetil tablets USP, 500 mg include Microcrystalline cellulose, Povidone, Croscarmellose sodium and Magnesium stearate. The film coating contains Hypromellose, Titanium dioxide, Polyethylene glycol, Iron oxide red, FD&C blue#2 aluminium lake and black iron oxide. Mycophenolate Mofetil Tablets, USP meets USP Dissolution Test 2."
},
{
"NDCCode": "70748-332-02",
"PackageDescription": "1 BOTTLE in 1 CARTON (70748-332-02) / 5 mL in 1 BOTTLE",
"NDC11Code": "70748-0332-02",
"ProductNDC": "70748-332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisolone Acetate",
"NonProprietaryName": "Prednisolone Acetate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20241011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216935",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "PREDNISOLONE ACETATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241011",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisolone acetate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammation of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe.",
"Description": "Prednisolone acetate ophthalmic suspension USP, 1% is a sterile, topical anti-inflammatory agent for ophthalmic use. Its chemical name is 11ß,17, 21-Trihydroxypregna-1,4-diene-3, 20-dione 21-acetate and it has the following structure:. Each mL of prednisolone acetate ophthalmic suspension USP contains:. Active: prednisolone acetate (micronized) 1%. Inactive: benzalkonium chloride as preservative, boric acid, edetate disodium, hypromellose, polysorbate 80, sodium bisulfite, sodium chloride, sodium citrate and water for injection. The pH during its shelf life ranges from 5.0 to 6.0."
},
{
"NDCCode": "70748-346-02",
"PackageDescription": "2 SYRINGE, PLASTIC in 1 CARTON (70748-346-02) / 3 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "70748-0346-02",
"ProductNDC": "70748-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Liraglutide",
"NonProprietaryName": "Liraglutide",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20251002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215421",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "LIRAGLUTIDE",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251002",
"SamplePackage": "N",
"IndicationAndUsage": "Liraglutide injection is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus.",
"Description": "Liraglutide injection contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The liraglutide is produced by a solid phase synthesis and is 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34 and attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1: Structural Formula of Liraglutide. Liraglutide injection is a sterile, aqueous, clear, colorless solution for subcutaneous use. Each 1 mL of liraglutide injection solution contains 6 mg of liraglutide and the following inactive ingredients: disodium hydrogen phosphate dihydrate, 1.42 mg; phenol, 5.5 mg; propylene glycol, 14 mg; and water for injection. Liraglutide injection has a pH between 8.0 and 8.4, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of liraglutide injection equivalent to 18 mg liraglutide (free-base, anhydrous)."
},
{
"NDCCode": "70748-347-02",
"PackageDescription": "25 VIAL in 1 CARTON (70748-347-02) / 2 mL in 1 VIAL",
"NDC11Code": "70748-0347-02",
"ProductNDC": "70748-347",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Thiamine Hydrochloride",
"NonProprietaryName": "Thiamine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215692",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "THIAMINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230615",
"SamplePackage": "N",
"IndicationAndUsage": "Thiamine hydrochloride injection is effective for the treatment of thiamine deficiency or beriberi whether of the dry (major symptoms related to the nervous system) or wet (major symptoms related to the cardiovascular system) variety. Thiamine hydrochloride injection should be used where rapid restoration of thiamine is necessary, as in Wernicke's encephalopathy, infantile beriberi with acute collapse, cardiovascular disease due to thiamine deficiency, or neuritis of pregnancy if vomiting is severe. It is also indicated when giving IV dextrose to individuals with marginal thiamine status to avoid precipitation of heart failure. Thiamine hydrochloride injection is also indicated in patients with established thiamine deficiency who cannot take thiamine orally due to coexisting severe anorexia, nausea, vomiting, or malabsorption. Thiamine hydrochloride injection is not usually indicated for conditions of decreased oral intake or decreased gastrointestinal absorption, because multiple vitamins should usually be given.",
"Description": "Thiamine Hydrochloride Injection, USP is a sterile solution of thiamine hydrochloride in Water for Injection for intramuscular (IM) or slow intravenous (IV) administration. Each mL contains: Thiamine hydrochloride 100 mg; chlorobutanol anhydrous (chloral derivative) 0.5%; monothioglycerol 0.5%; water for injection, q.s. Sodium hydroxide may have been added for pH adjustment (2.5 to 4.5). Thiamine hydrochloride, or vitamin B1, occurs as white crystals or crystalline powder that usually has a slight characteristic odor. Freely soluble in water; soluble in glycerin; slightly soluble in alcohol; insoluble in ether and benzene. Thiamine is rapidly destroyed in neutral or alkaline solutions but is stable in the dry state. It is reasonably stable to heat in acid solution. The chemical name of thiamine hydrochloride is thiazolium,3-[(4-amino-2-methyl-5-pyrimidinyl)methyl]-5-(2-hydroxyethyl)-4-methylchloride, monohydrochloride and it has the following structural formula."
},
{
"NDCCode": "70748-348-02",
"PackageDescription": "10 VIAL in 1 CARTON (70748-348-02) / 5 mL in 1 VIAL",
"NDC11Code": "70748-0348-02",
"ProductNDC": "70748-348",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216234",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20231023",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow or orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "70748-349-02",
"PackageDescription": "10 VIAL in 1 CARTON (70748-349-02) / 10 mL in 1 VIAL",
"NDC11Code": "70748-0349-02",
"ProductNDC": "70748-349",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216234",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20231023",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow or orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "70748-370-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70748-370-02) / 2 mL in 1 VIAL, SINGLE-DOSE (70748-370-01) ",
"NDC11Code": "70748-0370-02",
"ProductNDC": "70748-370",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sugammadex",
"NonProprietaryName": "Sugammadex",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214338",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SUGAMMADEX SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "gamma-Cyclodextrins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260728",
"SamplePackage": "N",
"IndicationAndUsage": "Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is."
},
{
"NDCCode": "70748-371-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70748-371-02) / 5 mL in 1 VIAL, SINGLE-DOSE (70748-371-01) ",
"NDC11Code": "70748-0371-02",
"ProductNDC": "70748-371",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sugammadex",
"NonProprietaryName": "Sugammadex",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214338",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SUGAMMADEX SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "gamma-Cyclodextrins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260728",
"SamplePackage": "N",
"IndicationAndUsage": "Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is."
},
{
"NDCCode": "72835-602-02",
"PackageDescription": "1 KIT in 1 CARTON (72835-602-02) * 1 BOTTLE in 1 CARTON (70748-130-06) / 30 TABLET, FILM COATED in 1 BOTTLE * 100 g in 1 TUBE (0113-1189-01) ",
"NDC11Code": "72835-0602-02",
"ProductNDC": "72835-602",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lefluniclo",
"NonProprietaryName": "Leflunomide And Diclofenac Sodium Gel",
"DosageFormName": "KIT",
"StartMarketingDate": "20230111",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "V2 Pharma, LLC",
"Status": "Active",
"LastUpdate": "2023-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230111",
"SamplePackage": "N"
},
{
"NDCCode": "70748-338-10",
"PackageDescription": "10 VIAL in 1 CARTON (70748-338-10) / 10 mL in 1 VIAL",
"NDC11Code": "70748-0338-10",
"ProductNDC": "70748-338",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217794",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240531",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline for injection and other antibacterial drugs, doxycycline for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated in infections caused by the following microorganisms. Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, Q fever, rickettsial pox and tick fevers). Mycoplasma pneumoniae (PPLO, Eaton Agent). Agents of psittacosis and ornithosis. Agents of lymphogranuloma venereum and granuloma inguinale. The spirochetal agent of relapsing fever (Borrelia recurrentis). The following gram-negative microorganisms. Haemophilus ducreyi (chancroid). Yersinia pestis. Francisella tularensis. Bartonella bacilliformis. Bacteroides species. Vibrio cholerae and. Campylobacter fetus. Brucella species (in conjunction with streptomycin). Because many strains of the following groups of microorganisms have been shown to be resistant to tetracyclines, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Haemophilus influenzae (respiratory infections). Klebsiella species (respiratory and urinary infections). Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug.",
"Description": "Doxycycline for injection, USP is an antibacterial drug synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate). The chemical designation of this yellow crystalline powder is (4S, 4aR, 5S, 5aR, 6R, 12 aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg."
},
{
"NDCCode": "0009-4992-02",
"PackageDescription": "10 BAG in 1 BOX (0009-4992-02) / 300 mL in 1 BAG (0009-4992-01) ",
"NDC11Code": "00009-4992-02",
"ProductNDC": "0009-4992",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zyvox",
"NonProprietaryName": "Linezolid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150706",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021131",
"LabelerName": "Pharmacia & Upjohn Company LLC",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/300mL",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150706",
"SamplePackage": "N"
},
{
"NDCCode": "0009-7807-02",
"PackageDescription": "10 BAG in 1 BOX (0009-7807-02) / 300 mL in 1 BAG (0009-7807-01) ",
"NDC11Code": "00009-7807-02",
"ProductNDC": "0009-7807",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zyvox",
"NonProprietaryName": "Linezolid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150218",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021131",
"LabelerName": "Pharmacia & Upjohn Company LLC",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/300mL",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150218",
"SamplePackage": "N",
"IndicationAndUsage": "ZYVOX is an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5)Limitations of Use (1.6): 1 ZYVOX is not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of ZYVOX formulations given for longer than 28 days have not been evaluated in controlled clinical trials.",
"Description": "ZYVOX I.V. Injection contains linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. ZYVOX I.V. Injection is supplied as a ready-to-use sterile isotonic solution for intravenous infusion. Each mL contains 2 mg of linezolid. Inactive ingredients are dextrose monohydrate 50.24 mg/mL in an aqueous vehicle for intravenous administration, sodium citrate dihydrate 1.64 mg/mL, and citric acid anhydrous 0.85 mg/mL. Sodium hydroxide NF and/or hydrochloric acid NF are used to adjust the pH. The sodium (Na+) content is 0.38 mg/mL (5 mEq/300 mL bag)."
},
{
"NDCCode": "0069-1558-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0069-1558-02) / 300 mL in 1 BOTTLE, GLASS (0069-1558-01) ",
"NDC11Code": "00069-1558-02",
"ProductNDC": "0069-1558",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190809",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190809",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "0069-6339-02",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0069-6339-02) / 300 mL in 1 BOTTLE, GLASS (0069-6339-01) ",
"NDC11Code": "00069-6339-02",
"ProductNDC": "0069-6339",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Octagam Immune Globulin (human)",
"NonProprietaryName": "Immune Globulin",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231113",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125062",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2024-01-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231113",
"SamplePackage": "N",
"IndicationAndUsage": "Octagam 10% is an immune globulin intravenous (human) liquid preparation indicated for the treatment of. Chronic immune thrombocytopenic purpura (ITP) in adults ( 1.1 ). Dermatomyositis (DM) in adults ( 1.2 ).",
"Description": "Immune Globulin Intravenous (Human), Octagam 10%, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 10% is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%) of which not less than 96% is normal human immunoglobulin G. Octagam 10% contains not more than 3% aggregates, not less than 94% monomers and dimers and not more than 3% fragments. On average, the product contains 106 µg/mL of IgA and even lower amounts of IgM. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 4.5 and 5.0. The osmolality is 310 - 380 mosmol/kg. The manufacturing process for Octagam 10% isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact Octagam 10% contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 30%, IgG 3 is 3% and IgG 4 is 2%. Octagam 10% contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (90 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of Octagam 10% are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 10% manufacturing process shows significant viral reduction in in vitro studies (Table 6). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6: In vitro reduction factor during Octagam 10% manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus."
},
{
"NDCCode": "0121-1101-02",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0121-1101-02) / 300 mg in 1 VIAL, SINGLE-USE (0121-1101-55) ",
"NDC11Code": "00121-1101-02",
"ProductNDC": "0121-1101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pentamidine Isethionate",
"NonProprietaryName": "Pentamidine Isethionate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20260612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206666",
"LabelerName": "PAI Holdings, LLC dba PAI Pharma",
"SubstanceName": "PENTAMIDINE DIISETHIONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/300mg",
"Pharm_Classes": "Antiprotozoal [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260612",
"SamplePackage": "N",
"IndicationAndUsage": "Pentamidine isethionate for injection is indicated for the treatment of pneumonia due to Pneumocystis carinii.",
"Description": "Pentamidine isethionate for injection, an anti-protozoal agent, is a sterile, nonpyrogenic, lyophilized product. After reconstitution, it should be administered by intramuscular (IM) or intravenous (IV) routes (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate is a white crystalline powder soluble in water and glycerin, slightly soluble in alcohol and insoluble in ether, acetone, and chloroform. It is chemically designated as 4,4-[1,5-pentanediylbis(oxy)]bis-benzenecarboximidamid with the following structural formula. Each vial contains:Pentamidine isethionate . . . . . . . . . . . . . 300 mg."
},
{
"NDCCode": "0944-2514-02",
"PackageDescription": "1 KIT in 1 CARTON (0944-2514-02) * 300 mL in 1 VIAL, GLASS (0944-2719-30) * 15 mL in 1 VIAL, GLASS (0944-2724-03) ",
"NDC11Code": "00944-2514-02",
"ProductNDC": "0944-2514",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Hyqvia",
"NonProprietaryName": "Immune Globulin Infusion (human), 10% With Recombinant Human Hyaluronidase",
"DosageFormName": "KIT",
"StartMarketingDate": "20140912",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125402",
"LabelerName": "Takeda Pharmaceuticals America, Inc.",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140912",
"SamplePackage": "N",
"Description": "HYQVIA is a dual vial unit with one vial of Immune Globulin Infusion (Human), 10% and one vial of rHuPH20. The Immune Globulin Infusion (Human), 10% of HYQVIA is a ready-for-use, sterile, liquid preparation of highly purified and concentrated IgG antibodies. The distribution of the IgG subclasses is similar to that of normal plasma. The Fc and Fab functions are maintained in the primary component. Pre-kallikrein activator activity is not detectable. The Immune Globulin Infusion (Human), 10% of HYQVIA contains 100 mg/mL protein. At least 98% of the protein is IgG, average immunoglobulin A (IgA) concentration is 37µg/mL, and immunoglobulin M (IgM) is present in trace amounts. The Immune Globulin Infusion (Human), 10% of HYQVIA contains a broad spectrum of IgG antibodies against bacterial and viral agents. Glycine (0.25M) serves as a stabilizing and buffering agent. There is no added sugar, sodium, or preservatives. The pH is 4.6 to 5.1. The osmolality is 240 to 300 mOsmol/kg. The Immune Globulin Infusion (Human), 10% of HYQVIA is manufactured from large pools of human plasma. IgG preparations are purified from plasma pools using a modified Cohn-Oncley cold ethanol fractionation process, as well as cation and anion exchange chromatography. Screening against potentially infectious agents begins with the donor selection process and continues throughout plasma collection and plasma preparation. Each individual plasma donation used in the manufacture of the Immune Globulin Infusion (Human), 10% of HYQVIA is collected only at FDA approved blood establishments and is tested by FDA licensed serological tests for Hepatitis B Surface Antigen (HBsAg), and for antibodies to Human Immunodeficiency Virus (HIV-1/HIV-2) and Hepatitis C Virus (HCV) in accordance with U.S. regulatory requirements. As an additional safety measure, mini-pools of the plasma are tested for the presence of HIV-1 and HCV by FDA licensed Nucleic Acid Testing (NAT). To further improve the margin of safety, three dedicated, independent and effective virus inactivation/removal steps have been integrated into the manufacturing and formulation processes, namely solvent/detergent (S/D) treatment, 35 nm nanofiltration, and a low pH incubation at elevated temperature. The S/D process includes treatment with an organic mixture of tri-n-butyl phosphate, octoxynol 9 and polysorbate 80 at 18°C to 25°C for a minimum of 60 minutes. In vitro virus spiking studies have been used to validate the capability of the manufacturing process to inactivate and remove viruses. To establish the minimum applicable virus clearance capacity of the manufacturing process, these virus clearance studies were performed under extreme conditions (e.g., at minimum S/D concentrations, incubation time and temperature for the S/D treatment). Virus clearance studies for the Immune Globulin Infusion (Human), 10% of HYQVIA performed in accordance with good laboratory practices (Table 12) have demonstrated that: 1 S/D treatment inactivates the lipid-enveloped viruses investigated to below detection limits within minutes., 2 35 nm nanofiltration removes lipid-enveloped viruses to below detection limits and reduces the nonlipid enveloped viruses HAV and B19V. As determined by a polymerase chain reaction assay, nanofiltration reduced B19V by a mean log10 reduction factor of 4.8 genome equivalents., 3 Treatment with low pH at elevated temperature of 30°C to 32°C inactivates lipid-enveloped viruses and encephalomyocarditis virus (EMCV, model for HAV) to below detection limits, and reduces mice minute virus (MMV, model for B19V)."
},
{
"NDCCode": "10167-300-02",
"PackageDescription": "5800 L in 1 CYLINDER (10167-300-02) ",
"NDC11Code": "10167-0300-02",
"ProductNDC": "10167-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Helium",
"NonProprietaryName": "Helium",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19920101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205843",
"LabelerName": "Air Source Industries Inc",
"SubstanceName": "HELIUM",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Active",
"LastUpdate": "2024-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920101",
"SamplePackage": "N"
},
{
"NDCCode": "12165-300-02",
"PackageDescription": "18 TUBE in 1 CASE (12165-300-02) > 1 STICK in 1 TUBE (12165-300-01) ",
"NDC11Code": "12165-0300-02",
"ProductNDC": "12165-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Grafco",
"ProprietaryNameSuffix": "Applicator 45 Cm",
"NonProprietaryName": "Silver Nitrate",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "19490419",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "GF Health Products, Inc.",
"SubstanceName": "SILVER NITRATE; POTASSIUM NITRATE",
"StrengthNumber": "73.4314; 24.4804",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "19490419",
"SamplePackage": "N"
},
{
"NDCCode": "13537-300-01",
"PackageDescription": "1 TUBE in 1 BOX (13537-300-01) > 4.5 g in 1 TUBE (13537-300-02)",
"NDC11Code": "13537-0300-01",
"ProductNDC": "13537-300",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cyzone",
"ProprietaryNameSuffix": "Better Lips Balm",
"NonProprietaryName": "Octinoxate, Oxybenzone, And Zinc Oxide",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110228",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation Ltd.",
"SubstanceName": "OCTINOXATE; OXYBENZONE; ZINC OXIDE",
"StrengthNumber": "70; 20; 10",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "14789-300-02",
"PackageDescription": "5 VIAL in 1 PACKAGE (14789-300-02) > 2 mL in 1 VIAL",
"NDC11Code": "14789-0300-02",
"ProductNDC": "14789-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"ProprietaryNameSuffix": "Injection, Usp",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "INJECTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "20090729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090233",
"LabelerName": "Nexus Pharmaceuticals Inc",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC],Antihistamine [EPC],Cholinergic Antagonists [MoA],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "17575-300-02",
"PackageDescription": "6570 L in 1 CYLINDER (17575-300-02) ",
"NDC11Code": "17575-0300-02",
"ProductNDC": "17575-300",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Air",
"NonProprietaryName": "Air",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19660101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205767",
"LabelerName": "AGL Welding Supply Co., Inc.",
"SubstanceName": "OXYGEN",
"StrengthNumber": "210",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19660101",
"SamplePackage": "N"
},
{
"NDCCode": "37808-246-02",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (37808-246-02) / 300 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC",
"NDC11Code": "37808-0246-02",
"ProductNDC": "37808-246",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aspirin 81 Mg",
"ProprietaryNameSuffix": "Low Dose",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "HEB",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100401",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains. ask your doctor about other uses for this product."
},
{
"NDCCode": "41900-300-02",
"PackageDescription": "2 BOTTLE, SPRAY in 1 PACKAGE (41900-300-02) > 8 mL in 1 BOTTLE, SPRAY (41900-300-01)",
"NDC11Code": "41900-0300-02",
"ProductNDC": "41900-300",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Quik Spray",
"NonProprietaryName": "Advanced Hand Sanitizing Spray",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20091001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333",
"LabelerName": "Cinogen Cosmetics Zhaoqing, LTD.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".62",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70748-300-02</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-300-02) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0300-02</NDC11Code>
<ProductNDC>70748-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215719</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid- responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti- inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white crystalline powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7 Mol. Wt. 466.95. Chemical Name. chloromethyl 17a-[(ethoxycarbonyl)oxy]-11β-hydroxyandrosta-1,4-diene-3-one-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 0.5% (5 mg). INACTIVES: Edetate disodium, glycerin, povidone, tyloxapol and water for injection. Hydrochloric Acid and/or sodium hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 350 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>70748-300-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-300-01) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0300-01</NDC11Code>
<ProductNDC>70748-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215719</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid- responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti- inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white crystalline powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7 Mol. Wt. 466.95. Chemical Name. chloromethyl 17a-[(ethoxycarbonyl)oxy]-11β-hydroxyandrosta-1,4-diene-3-one-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 0.5% (5 mg). INACTIVES: Edetate disodium, glycerin, povidone, tyloxapol and water for injection. Hydrochloric Acid and/or sodium hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 350 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>70748-300-03</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-300-03) / 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0300-03</NDC11Code>
<ProductNDC>70748-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215719</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid- responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti- inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white crystalline powder. Loteprednol etabonate is represented by the following structural formula. C24H31ClO7 Mol. Wt. 466.95. Chemical Name. chloromethyl 17a-[(ethoxycarbonyl)oxy]-11β-hydroxyandrosta-1,4-diene-3-one-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 0.5% (5 mg). INACTIVES: Edetate disodium, glycerin, povidone, tyloxapol and water for injection. Hydrochloric Acid and/or sodium hydroxide may be added to adjust the pH. The suspension is essentially isotonic with a tonicity of 250 to 350 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride 0.01%.</Description>
</NDC>
<NDC>
<NDCCode>70748-411-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-411-01) / 300 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0411-01</NDC11Code>
<ProductNDC>70748-411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brivaracetam</ProprietaryName>
<NonProprietaryName>Brivaracetam</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220164</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BRIVARACETAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Epoxide Hydrolase Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brivaracetam oral solution is indicated for the treatment of partial-onset seizures in patients 1 month of age and older.</IndicationAndUsage>
<Description>The chemical name of brivaracetam is (2S)-2-[(4R)-2-oxo-4-propyltetrahydro-1H-pyrrol-1-yl] butanamide. Its molecular formula is C11H20N2O2 and its molecular weight is 212.29. The chemical structure is. Brivaracetam is a white to off-white crystalline powder. It is freely soluble in water, in ethanol, in methanol, in glacial acetic acid, in acetonitrile and in acetone. It is soluble in toluene. Oral Solution. Brivaracetam oral solution contains 10 mg of brivaracetam per mL. The inactive ingredients are sodium citrate (trisodium citrate dihydrate), anhydrous citric acid, methylparaben, sodium carboxymethylcellulose, sucralose, non-crystallizing sorbitol solution, anhydrous glycerol, raspberry flavor, and purified water. Raspberry flavor also contains maltodextrin, propylene glycol and modified waxy maize starch.</Description>
</NDC>
<NDC>
<NDCCode>70748-105-02</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70748-105-02) </PackageDescription>
<NDC11Code>70748-0105-02</NDC11Code>
<ProductNDC>70748-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin</ProprietaryName>
<NonProprietaryName>Dapagliflozin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211531</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC],Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70748-106-02</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70748-106-02) </PackageDescription>
<NDC11Code>70748-0106-02</NDC11Code>
<ProductNDC>70748-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dapagliflozin</ProprietaryName>
<NonProprietaryName>Dapagliflozin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211531</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DAPAGLIFLOZIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sodium-Glucose Cotransporter 2 Inhibitor [EPC],Sodium-Glucose Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70748-186-02</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (70748-186-02) </PackageDescription>
<NDC11Code>70748-0186-02</NDC11Code>
<ProductNDC>70748-186</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<EndMarketingDate>20250731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210181</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<EndMarketingDatePackage>20250731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolate mofetil is an antimetabolite immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric recipients 3 months of age and older of allogeneic kidney, heart or liver transplants, in combination with other immunosuppressants. (1).</IndicationAndUsage>
<Description>Mycophenolate mofetil, USP is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. Mycophenolate mofetil, USP is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP and tablets containing 500 mg of mycophenolate mofetil, USP. Inactive ingredients in Mycophenolate mofetil capsules USP, 250 mg include microcrystalline cellulose, hydroxypropyl cellulose, povidone (K-90), croscarmellose sodium, talc and magnesium stearate. The capsule shells contain FD&C blue #2, gelatin, red iron oxide, sodium lauryl sulfate, titanium dioxide and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, iron oxide black and potassium hydroxide. Mycophenolate Mofetil Capsules, USP meets USP Dissolution Test 2. Inactive ingredients in Mycophenolate mofetil tablets USP, 500 mg include Microcrystalline cellulose, Povidone, Croscarmellose sodium and Magnesium stearate. The film coating contains Hypromellose, Titanium dioxide, Polyethylene glycol, Iron oxide red, FD&C blue#2 aluminium lake and black iron oxide. Mycophenolate Mofetil Tablets, USP meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>70748-262-02</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (70748-262-02) </PackageDescription>
<NDC11Code>70748-0262-02</NDC11Code>
<ProductNDC>70748-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201221</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212087</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20201221</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolate mofetil is an antimetabolite immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric recipients 3 months of age and older of allogeneic kidney, heart or liver transplants, in combination with other immunosuppressants. (1).</IndicationAndUsage>
<Description>Mycophenolate mofetil, USP is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white to off-white crystalline powder. It is slightly soluble in water (43 µg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.4 to 4.1. Mycophenolate mofetil, USP is available for oral administration as capsules containing 250 mg of mycophenolate mofetil, USP and tablets containing 500 mg of mycophenolate mofetil, USP. Inactive ingredients in Mycophenolate mofetil capsules USP, 250 mg include microcrystalline cellulose, hydroxypropyl cellulose, povidone (K-90), croscarmellose sodium, talc and magnesium stearate. The capsule shells contain FD&C blue #2, gelatin, red iron oxide, sodium lauryl sulfate, titanium dioxide and yellow iron oxide. The imprinting ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, iron oxide black and potassium hydroxide. Mycophenolate Mofetil Capsules, USP meets USP Dissolution Test 2. Inactive ingredients in Mycophenolate mofetil tablets USP, 500 mg include Microcrystalline cellulose, Povidone, Croscarmellose sodium and Magnesium stearate. The film coating contains Hypromellose, Titanium dioxide, Polyethylene glycol, Iron oxide red, FD&C blue#2 aluminium lake and black iron oxide. Mycophenolate Mofetil Tablets, USP meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>70748-332-02</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70748-332-02) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70748-0332-02</NDC11Code>
<ProductNDC>70748-332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisolone Acetate</ProprietaryName>
<NonProprietaryName>Prednisolone Acetate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20241011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216935</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PREDNISOLONE ACETATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisolone acetate ophthalmic suspension is indicated for the treatment of steroid-responsive inflammation of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe.</IndicationAndUsage>
<Description>Prednisolone acetate ophthalmic suspension USP, 1% is a sterile, topical anti-inflammatory agent for ophthalmic use. Its chemical name is 11ß,17, 21-Trihydroxypregna-1,4-diene-3, 20-dione 21-acetate and it has the following structure:. Each mL of prednisolone acetate ophthalmic suspension USP contains:. Active: prednisolone acetate (micronized) 1%. Inactive: benzalkonium chloride as preservative, boric acid, edetate disodium, hypromellose, polysorbate 80, sodium bisulfite, sodium chloride, sodium citrate and water for injection. The pH during its shelf life ranges from 5.0 to 6.0.</Description>
</NDC>
<NDC>
<NDCCode>70748-346-02</NDCCode>
<PackageDescription>2 SYRINGE, PLASTIC in 1 CARTON (70748-346-02) / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>70748-0346-02</NDC11Code>
<ProductNDC>70748-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Liraglutide</ProprietaryName>
<NonProprietaryName>Liraglutide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20251002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215421</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIRAGLUTIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Liraglutide injection is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Liraglutide injection contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The liraglutide is produced by a solid phase synthesis and is 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34 and attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1: Structural Formula of Liraglutide. Liraglutide injection is a sterile, aqueous, clear, colorless solution for subcutaneous use. Each 1 mL of liraglutide injection solution contains 6 mg of liraglutide and the following inactive ingredients: disodium hydrogen phosphate dihydrate, 1.42 mg; phenol, 5.5 mg; propylene glycol, 14 mg; and water for injection. Liraglutide injection has a pH between 8.0 and 8.4, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of liraglutide injection equivalent to 18 mg liraglutide (free-base, anhydrous).</Description>
</NDC>
<NDC>
<NDCCode>70748-347-02</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70748-347-02) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>70748-0347-02</NDC11Code>
<ProductNDC>70748-347</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Thiamine Hydrochloride</ProprietaryName>
<NonProprietaryName>Thiamine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215692</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>THIAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Thiamine hydrochloride injection is effective for the treatment of thiamine deficiency or beriberi whether of the dry (major symptoms related to the nervous system) or wet (major symptoms related to the cardiovascular system) variety. Thiamine hydrochloride injection should be used where rapid restoration of thiamine is necessary, as in Wernicke's encephalopathy, infantile beriberi with acute collapse, cardiovascular disease due to thiamine deficiency, or neuritis of pregnancy if vomiting is severe. It is also indicated when giving IV dextrose to individuals with marginal thiamine status to avoid precipitation of heart failure. Thiamine hydrochloride injection is also indicated in patients with established thiamine deficiency who cannot take thiamine orally due to coexisting severe anorexia, nausea, vomiting, or malabsorption. Thiamine hydrochloride injection is not usually indicated for conditions of decreased oral intake or decreased gastrointestinal absorption, because multiple vitamins should usually be given.</IndicationAndUsage>
<Description>Thiamine Hydrochloride Injection, USP is a sterile solution of thiamine hydrochloride in Water for Injection for intramuscular (IM) or slow intravenous (IV) administration. Each mL contains: Thiamine hydrochloride 100 mg; chlorobutanol anhydrous (chloral derivative) 0.5%; monothioglycerol 0.5%; water for injection, q.s. Sodium hydroxide may have been added for pH adjustment (2.5 to 4.5). Thiamine hydrochloride, or vitamin B1, occurs as white crystals or crystalline powder that usually has a slight characteristic odor. Freely soluble in water; soluble in glycerin; slightly soluble in alcohol; insoluble in ether and benzene. Thiamine is rapidly destroyed in neutral or alkaline solutions but is stable in the dry state. It is reasonably stable to heat in acid solution. The chemical name of thiamine hydrochloride is thiazolium,3-[(4-amino-2-methyl-5-pyrimidinyl)methyl]-5-(2-hydroxyethyl)-4-methylchloride, monohydrochloride and it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>70748-348-02</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70748-348-02) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>70748-0348-02</NDC11Code>
<ProductNDC>70748-348</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216234</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow or orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-349-02</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70748-349-02) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>70748-0349-02</NDC11Code>
<ProductNDC>70748-349</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216234</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The structural formula is. The chemical formula is C32H53BrN2O4 with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow or orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>70748-370-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70748-370-02) / 2 mL in 1 VIAL, SINGLE-DOSE (70748-370-01) </PackageDescription>
<NDC11Code>70748-0370-02</NDC11Code>
<ProductNDC>70748-370</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sugammadex</ProprietaryName>
<NonProprietaryName>Sugammadex</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214338</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SUGAMMADEX SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>gamma-Cyclodextrins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>70748-371-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70748-371-02) / 5 mL in 1 VIAL, SINGLE-DOSE (70748-371-01) </PackageDescription>
<NDC11Code>70748-0371-02</NDC11Code>
<ProductNDC>70748-371</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sugammadex</ProprietaryName>
<NonProprietaryName>Sugammadex</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214338</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SUGAMMADEX SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>gamma-Cyclodextrins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sugammadex injection is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC's BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC's marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl) - 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin Octa sodium salt with a molecular weight of 2178.01. The structural formula is:. Sugammadex injection is supplied as a sterile, non-pyrogenic aqueous solution that is clear and colorless to slightly brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.785 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex injection may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2-carboxyethyl)-6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>72835-602-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (72835-602-02) * 1 BOTTLE in 1 CARTON (70748-130-06) / 30 TABLET, FILM COATED in 1 BOTTLE * 100 g in 1 TUBE (0113-1189-01) </PackageDescription>
<NDC11Code>72835-0602-02</NDC11Code>
<ProductNDC>72835-602</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lefluniclo</ProprietaryName>
<NonProprietaryName>Leflunomide And Diclofenac Sodium Gel</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20230111</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>V2 Pharma, LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2023-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70748-338-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70748-338-10) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>70748-0338-10</NDC11Code>
<ProductNDC>70748-338</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217794</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline for injection and other antibacterial drugs, doxycycline for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated in infections caused by the following microorganisms. Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, Q fever, rickettsial pox and tick fevers). Mycoplasma pneumoniae (PPLO, Eaton Agent). Agents of psittacosis and ornithosis. Agents of lymphogranuloma venereum and granuloma inguinale. The spirochetal agent of relapsing fever (Borrelia recurrentis). The following gram-negative microorganisms. Haemophilus ducreyi (chancroid). Yersinia pestis. Francisella tularensis. Bartonella bacilliformis. Bacteroides species. Vibrio cholerae and. Campylobacter fetus. Brucella species (in conjunction with streptomycin). Because many strains of the following groups of microorganisms have been shown to be resistant to tetracyclines, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Haemophilus influenzae (respiratory infections). Klebsiella species (respiratory and urinary infections). Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug.</IndicationAndUsage>
<Description>Doxycycline for injection, USP is an antibacterial drug synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate). The chemical designation of this yellow crystalline powder is (4S, 4aR, 5S, 5aR, 6R, 12 aS)-4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg.</Description>
</NDC>
<NDC>
<NDCCode>0009-4992-02</NDCCode>
<PackageDescription>10 BAG in 1 BOX (0009-4992-02) / 300 mL in 1 BAG (0009-4992-01) </PackageDescription>
<NDC11Code>00009-4992-02</NDC11Code>
<ProductNDC>0009-4992</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zyvox</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150706</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021131</ApplicationNumber>
<LabelerName>Pharmacia & Upjohn Company LLC</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/300mL</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0009-7807-02</NDCCode>
<PackageDescription>10 BAG in 1 BOX (0009-7807-02) / 300 mL in 1 BAG (0009-7807-01) </PackageDescription>
<NDC11Code>00009-7807-02</NDC11Code>
<ProductNDC>0009-7807</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zyvox</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150218</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021131</ApplicationNumber>
<LabelerName>Pharmacia & Upjohn Company LLC</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/300mL</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZYVOX is an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5)Limitations of Use (1.6): 1 ZYVOX is not indicated for the treatment of Gram-negative infections., 2 The safety and efficacy of ZYVOX formulations given for longer than 28 days have not been evaluated in controlled clinical trials.</IndicationAndUsage>
<Description>ZYVOX I.V. Injection contains linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. ZYVOX I.V. Injection is supplied as a ready-to-use sterile isotonic solution for intravenous infusion. Each mL contains 2 mg of linezolid. Inactive ingredients are dextrose monohydrate 50.24 mg/mL in an aqueous vehicle for intravenous administration, sodium citrate dihydrate 1.64 mg/mL, and citric acid anhydrous 0.85 mg/mL. Sodium hydroxide NF and/or hydrochloric acid NF are used to adjust the pH. The sodium (Na+) content is 0.38 mg/mL (5 mEq/300 mL bag).</Description>
</NDC>
<NDC>
<NDCCode>0069-1558-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-1558-02) / 300 mL in 1 BOTTLE, GLASS (0069-1558-01) </PackageDescription>
<NDC11Code>00069-1558-02</NDC11Code>
<ProductNDC>0069-1558</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190809</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>0069-6339-02</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0069-6339-02) / 300 mL in 1 BOTTLE, GLASS (0069-6339-01) </PackageDescription>
<NDC11Code>00069-6339-02</NDC11Code>
<ProductNDC>0069-6339</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Octagam Immune Globulin (human)</ProprietaryName>
<NonProprietaryName>Immune Globulin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231113</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125062</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Octagam 10% is an immune globulin intravenous (human) liquid preparation indicated for the treatment of. Chronic immune thrombocytopenic purpura (ITP) in adults ( 1.1 ). Dermatomyositis (DM) in adults ( 1.2 ).</IndicationAndUsage>
<Description>Immune Globulin Intravenous (Human), Octagam 10%, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. Octagam 10% is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%) of which not less than 96% is normal human immunoglobulin G. Octagam 10% contains not more than 3% aggregates, not less than 94% monomers and dimers and not more than 3% fragments. On average, the product contains 106 µg/mL of IgA and even lower amounts of IgM. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 4.5 and 5.0. The osmolality is 310 - 380 mosmol/kg. The manufacturing process for Octagam 10% isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact Octagam 10% contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 30%, IgG 3 is 3% and IgG 4 is 2%. Octagam 10% contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (90 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of Octagam 10% are provided by FDA-approved blood establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Triton X-100 (Octoxynol). The Octagam 10% manufacturing process shows significant viral reduction in in vitro studies (Table 6). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6: In vitro reduction factor during Octagam 10% manufacturing. *not calculated for global LRF. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus. SBV: Sindbis Virus. MEV: Mouse Encephalomyelitis Virus. PPV: Porcine Parvovirus.</Description>
</NDC>
<NDC>
<NDCCode>0121-1101-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0121-1101-02) / 300 mg in 1 VIAL, SINGLE-USE (0121-1101-55) </PackageDescription>
<NDC11Code>00121-1101-02</NDC11Code>
<ProductNDC>0121-1101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pentamidine Isethionate</ProprietaryName>
<NonProprietaryName>Pentamidine Isethionate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20260612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206666</ApplicationNumber>
<LabelerName>PAI Holdings, LLC dba PAI Pharma</LabelerName>
<SubstanceName>PENTAMIDINE DIISETHIONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/300mg</StrengthUnit>
<Pharm_Classes>Antiprotozoal [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pentamidine isethionate for injection is indicated for the treatment of pneumonia due to Pneumocystis carinii.</IndicationAndUsage>
<Description>Pentamidine isethionate for injection, an anti-protozoal agent, is a sterile, nonpyrogenic, lyophilized product. After reconstitution, it should be administered by intramuscular (IM) or intravenous (IV) routes (see DOSAGE AND ADMINISTRATION). Pentamidine isethionate is a white crystalline powder soluble in water and glycerin, slightly soluble in alcohol and insoluble in ether, acetone, and chloroform. It is chemically designated as 4,4-[1,5-pentanediylbis(oxy)]bis-benzenecarboximidamid with the following structural formula. Each vial contains:Pentamidine isethionate . . . . . . . . . . . . . 300 mg.</Description>
</NDC>
<NDC>
<NDCCode>0944-2514-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0944-2514-02) * 300 mL in 1 VIAL, GLASS (0944-2719-30) * 15 mL in 1 VIAL, GLASS (0944-2724-03) </PackageDescription>
<NDC11Code>00944-2514-02</NDC11Code>
<ProductNDC>0944-2514</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Hyqvia</ProprietaryName>
<NonProprietaryName>Immune Globulin Infusion (human), 10% With Recombinant Human Hyaluronidase</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140912</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125402</ApplicationNumber>
<LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>HYQVIA is a dual vial unit with one vial of Immune Globulin Infusion (Human), 10% and one vial of rHuPH20. The Immune Globulin Infusion (Human), 10% of HYQVIA is a ready-for-use, sterile, liquid preparation of highly purified and concentrated IgG antibodies. The distribution of the IgG subclasses is similar to that of normal plasma. The Fc and Fab functions are maintained in the primary component. Pre-kallikrein activator activity is not detectable. The Immune Globulin Infusion (Human), 10% of HYQVIA contains 100 mg/mL protein. At least 98% of the protein is IgG, average immunoglobulin A (IgA) concentration is 37µg/mL, and immunoglobulin M (IgM) is present in trace amounts. The Immune Globulin Infusion (Human), 10% of HYQVIA contains a broad spectrum of IgG antibodies against bacterial and viral agents. Glycine (0.25M) serves as a stabilizing and buffering agent. There is no added sugar, sodium, or preservatives. The pH is 4.6 to 5.1. The osmolality is 240 to 300 mOsmol/kg. The Immune Globulin Infusion (Human), 10% of HYQVIA is manufactured from large pools of human plasma. IgG preparations are purified from plasma pools using a modified Cohn-Oncley cold ethanol fractionation process, as well as cation and anion exchange chromatography. Screening against potentially infectious agents begins with the donor selection process and continues throughout plasma collection and plasma preparation. Each individual plasma donation used in the manufacture of the Immune Globulin Infusion (Human), 10% of HYQVIA is collected only at FDA approved blood establishments and is tested by FDA licensed serological tests for Hepatitis B Surface Antigen (HBsAg), and for antibodies to Human Immunodeficiency Virus (HIV-1/HIV-2) and Hepatitis C Virus (HCV) in accordance with U.S. regulatory requirements. As an additional safety measure, mini-pools of the plasma are tested for the presence of HIV-1 and HCV by FDA licensed Nucleic Acid Testing (NAT). To further improve the margin of safety, three dedicated, independent and effective virus inactivation/removal steps have been integrated into the manufacturing and formulation processes, namely solvent/detergent (S/D) treatment, 35 nm nanofiltration, and a low pH incubation at elevated temperature. The S/D process includes treatment with an organic mixture of tri-n-butyl phosphate, octoxynol 9 and polysorbate 80 at 18°C to 25°C for a minimum of 60 minutes. In vitro virus spiking studies have been used to validate the capability of the manufacturing process to inactivate and remove viruses. To establish the minimum applicable virus clearance capacity of the manufacturing process, these virus clearance studies were performed under extreme conditions (e.g., at minimum S/D concentrations, incubation time and temperature for the S/D treatment). Virus clearance studies for the Immune Globulin Infusion (Human), 10% of HYQVIA performed in accordance with good laboratory practices (Table 12) have demonstrated that: 1 S/D treatment inactivates the lipid-enveloped viruses investigated to below detection limits within minutes., 2 35 nm nanofiltration removes lipid-enveloped viruses to below detection limits and reduces the nonlipid enveloped viruses HAV and B19V. As determined by a polymerase chain reaction assay, nanofiltration reduced B19V by a mean log10 reduction factor of 4.8 genome equivalents., 3 Treatment with low pH at elevated temperature of 30°C to 32°C inactivates lipid-enveloped viruses and encephalomyocarditis virus (EMCV, model for HAV) to below detection limits, and reduces mice minute virus (MMV, model for B19V).</Description>
</NDC>
<NDC>
<NDCCode>10167-300-02</NDCCode>
<PackageDescription>5800 L in 1 CYLINDER (10167-300-02) </PackageDescription>
<NDC11Code>10167-0300-02</NDC11Code>
<ProductNDC>10167-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Helium</ProprietaryName>
<NonProprietaryName>Helium</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19920101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205843</ApplicationNumber>
<LabelerName>Air Source Industries Inc</LabelerName>
<SubstanceName>HELIUM</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>12165-300-02</NDCCode>
<PackageDescription>18 TUBE in 1 CASE (12165-300-02) > 1 STICK in 1 TUBE (12165-300-01) </PackageDescription>
<NDC11Code>12165-0300-02</NDC11Code>
<ProductNDC>12165-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Grafco</ProprietaryName>
<ProprietaryNameSuffix>Applicator 45 Cm</ProprietaryNameSuffix>
<NonProprietaryName>Silver Nitrate</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19490419</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>GF Health Products, Inc.</LabelerName>
<SubstanceName>SILVER NITRATE; POTASSIUM NITRATE</SubstanceName>
<StrengthNumber>73.4314; 24.4804</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19490419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>13537-300-01</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-300-01) > 4.5 g in 1 TUBE (13537-300-02)</PackageDescription>
<NDC11Code>13537-0300-01</NDC11Code>
<ProductNDC>13537-300</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cyzone</ProprietaryName>
<ProprietaryNameSuffix>Better Lips Balm</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Oxybenzone, And Zinc Oxide</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110228</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation Ltd.</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE; ZINC OXIDE</SubstanceName>
<StrengthNumber>70; 20; 10</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14789-300-02</NDCCode>
<PackageDescription>5 VIAL in 1 PACKAGE (14789-300-02) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>14789-0300-02</NDC11Code>
<ProductNDC>14789-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<ProprietaryNameSuffix>Injection, Usp</ProprietaryNameSuffix>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>20090729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090233</ApplicationNumber>
<LabelerName>Nexus Pharmaceuticals Inc</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Antihistamine [EPC],Cholinergic Antagonists [MoA],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>17575-300-02</NDCCode>
<PackageDescription>6570 L in 1 CYLINDER (17575-300-02) </PackageDescription>
<NDC11Code>17575-0300-02</NDC11Code>
<ProductNDC>17575-300</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Air</ProprietaryName>
<NonProprietaryName>Air</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19660101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205767</ApplicationNumber>
<LabelerName>AGL Welding Supply Co., Inc.</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>210</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19660101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37808-246-02</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (37808-246-02) / 300 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>37808-0246-02</NDC11Code>
<ProductNDC>37808-246</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aspirin 81 Mg</ProprietaryName>
<ProprietaryNameSuffix>Low Dose</ProprietaryNameSuffix>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>HEB</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains. ask your doctor about other uses for this product.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41900-300-02</NDCCode>
<PackageDescription>2 BOTTLE, SPRAY in 1 PACKAGE (41900-300-02) > 8 mL in 1 BOTTLE, SPRAY (41900-300-01)</PackageDescription>
<NDC11Code>41900-0300-02</NDC11Code>
<ProductNDC>41900-300</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Quik Spray</ProprietaryName>
<NonProprietaryName>Advanced Hand Sanitizing Spray</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20091001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333</ApplicationNumber>
<LabelerName>Cinogen Cosmetics Zhaoqing, LTD.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.62</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
</NDCList>