{
"NDC": [
{
"NDCCode": "70756-634-10",
"PackageDescription": "10 VIAL in 1 CARTON (70756-634-10) / 20 mL in 1 VIAL (70756-634-87) ",
"NDC11Code": "70756-0634-10",
"ProductNDC": "70756-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217354",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230228",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.",
"Description": "Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3 MW 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "70756-634-25",
"PackageDescription": "25 CARTON in 1 CARTON (70756-634-25) / 10 VIAL in 1 CARTON (70756-634-10) / 20 mL in 1 VIAL (70756-634-87) ",
"NDC11Code": "70756-0634-25",
"ProductNDC": "70756-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217354",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230228",
"SamplePackage": "N",
"IndicationAndUsage": "Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).",
"Description": "Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows:. C19H28BrNO3 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate injection, USP is a clear, colorless, sterile liquid with a pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, benzyl alcohol is used as preservative and hydrochloric acid and/or sodium hydroxide as pH adjusters."
},
{
"NDCCode": "10019-634-01",
"PackageDescription": "10 VIAL in 1 PACKAGE (10019-634-01) > 4 mL in 1 VIAL (10019-634-31)",
"NDC11Code": "10019-0634-01",
"ProductNDC": "10019-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin And Sulbactam",
"NonProprietaryName": "Ampicillin, Sulbactam",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065406",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
"StrengthNumber": "250; 125",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
},
{
"NDCCode": "13668-634-74",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (13668-634-74) / 10 TABLET in 1 BLISTER PACK (13668-634-71) ",
"NDC11Code": "13668-0634-74",
"ProductNDC": "13668-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "24; 26",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "41250-634-10",
"PackageDescription": "2 BOTTLE in 1 CARTON (41250-634-10) / 144 SPRAY, METERED in 1 BOTTLE",
"NDC11Code": "41250-0634-10",
"ProductNDC": "41250-634",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief",
"NonProprietaryName": "Fluticasone Propionate",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20160527",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207957",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "FLUTICASONE PROPIONATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210323",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily relieves these symptoms of hay fever or other upper respiratory allergies: 1 nasal congestion, 2 itchy nose, 3 runny nose, 4 itchy, watery eyes, 5 sneezing."
},
{
"NDCCode": "43547-634-10",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (43547-634-10) ",
"NDC11Code": "43547-0634-10",
"ProductNDC": "43547-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217531",
"LabelerName": "Solco Healthcare US,LLC",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220823",
"SamplePackage": "N",
"IndicationAndUsage": "Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.",
"Description": "Dicyclomine hydrochloride capsules are an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: 1 Dicyclomine hydrochloride capsules USP, for oral use, contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: calcium sulfate dihydrate, lactose monohydrate, and magnesium stearate., 2 In addition, the capsule shells contain Gelatin, Sodium Lauryl Sulfate, and Titanium Dioxide. The imprinting ink contains D&C yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, iron oxide black, potassium hydroxide and shellac glaze."
},
{
"NDCCode": "43858-634-01",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (43858-634-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE",
"NDC11Code": "43858-0634-01",
"ProductNDC": "43858-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ceftriaxone Sodium",
"NonProprietaryName": "Ceftriaxone Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20050509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065169",
"LabelerName": "Sandoz GmbH",
"SubstanceName": "CEFTRIAXONE SODIUM",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180319",
"SamplePackage": "N"
},
{
"NDCCode": "46708-634-06",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (46708-634-06) / 6 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "46708-0634-06",
"ProductNDC": "46708-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dabigatran Etexilate",
"NonProprietaryName": "Dabigatran Etexilate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215233",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DABIGATRAN ETEXILATE MESYLATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240614",
"SamplePackage": "N",
"IndicationAndUsage": "Dabigatran etexilate capsules are a direct thrombin inhibitor indicated: To reduce the risk of stroke and systemic embolism in adult patients with non-valvular atrial fibrillation (1.1) For the treatment of deep venous thrombosis (DVT) and pulmonary embolism (PE) in adult patients who have been treated with a parenteral anticoagulant for 5 to 10 days (1.2) To reduce the risk of recurrence of DVT and PE in adult patients who have been previously treated (1.3) For the prophylaxis of DVT and PE in adult patients who have undergone hip replacement surgery (1.4) For the treatment of venous thromboembolic events (VTE) in pediatric patients 8 to less than 18 years of age who have been treated with a parenteral anticoagulant for at least 5 days (1.5) To reduce the risk of recurrence of VTE in pediatric patients 8 to less than 18 years of age who have been previously treated (1.6).",
"Description": "The chemical name for dabigatran etexilate mesylate, a direct thrombin inhibitor, is β-Alanine, N-[[2-[[[4-[[[(hexyloxy)carbonyl]amino]iminomethyl]phenyl]amino]methyl]-1-methyl-1H-benzimidazol-5-yl]carbonyl]-N-2-pyridinyl-,ethyl ester, methanesulfonate. The empirical formula is C34H41N7O5⋅ CH4O3S and the molecular weight is 723.86 (mesylate salt), 627.75 (free base). The structural formula is. Dabigatran etexilate mesylate is off-white to yellowish powder. It is freely soluble in methanol and ethanol, practically insoluble in acetone, ethyl acetate and water. Dabigatran etexilate capsules are supplied in 75 mg, 110 mg, and 150 mg strengths for oral administration. Each capsule contains dabigatran etexilate mesylate as the active ingredient: 75 mg dabigatran etexilate (equivalent to 86.48 mg dabigatran etexilate mesylate), 110 mg dabigatran etexilate (equivalent to 126.83 mg dabigatran etexilate mesylate) or 150 mg dabigatran etexilate (equivalent to 172.95 mg dabigatran etexilate mesylate) along with the following inactive ingredients: hydroxypropyl cellulose, hypromellose phthalate, pelletized tartaric acid, talc. The capsule shell is composed of carrageenan, hypromellose, potassium chloride and titanium dioxide. Additionally, 110 mg and 150 mg capsule shell also contains FD&C Blue No. 2. The empty hard hypromellose capsule shells are printed with edible black ink containing iron oxide black, potassium hydroxide and shellac."
},
{
"NDCCode": "49348-634-01",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (49348-634-01) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "49348-0634-01",
"ProductNDC": "49348-634",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunmark Loratadine",
"ProprietaryNameSuffix": "Allergy Relief",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20040202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075990",
"LabelerName": "McKesson",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "49348-634-47",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (49348-634-47) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "49348-0634-47",
"ProductNDC": "49348-634",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunmark Loratadine",
"ProprietaryNameSuffix": "Allergy Relief",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20040202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075990",
"LabelerName": "McKesson",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "49349-634-10",
"PackageDescription": "6 TABLET in 1 VIAL (49349-634-10)",
"NDC11Code": "49349-0634-10",
"ProductNDC": "49349-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin Hydrochloride",
"NonProprietaryName": "Ciprofloxacin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075593",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-14"
},
{
"NDCCode": "50742-634-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-634-10) ",
"NDC11Code": "50742-0634-10",
"ProductNDC": "50742-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin",
"NonProprietaryName": "Metformin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209674",
"LabelerName": "Ingenus Pharmaceuticals, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181210",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are a biguanide indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (1).",
"Description": "Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white to off-white crystalline powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: ethylcellulose, hydroxypropyl cellulose, hypromellose, magnesium stearate, povidone, triethyl citrate, titanium dioxide, polydextrose, triacetin, macrogol/PEG. Product Meets USP Dissolution Test 23."
},
{
"NDCCode": "57664-634-44",
"PackageDescription": "10 VIAL in 1 CARTON (57664-634-44) > 5 mL in 1 VIAL (57664-634-41) ",
"NDC11Code": "57664-0634-44",
"ProductNDC": "57664-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120808",
"EndMarketingDate": "20180629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090850",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-06-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120808",
"EndMarketingDatePackage": "20180629",
"SamplePackage": "N"
},
{
"NDCCode": "57664-634-45",
"PackageDescription": "10 VIAL in 1 CARTON (57664-634-45) > 10 mL in 1 VIAL (57664-634-42) ",
"NDC11Code": "57664-0634-45",
"ProductNDC": "57664-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20120808",
"EndMarketingDate": "20180629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090850",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-06-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120808",
"EndMarketingDatePackage": "20180629",
"SamplePackage": "N"
},
{
"NDCCode": "59651-634-03",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (59651-634-03) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "59651-0634-03",
"ProductNDC": "59651-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isotretinoin",
"NonProprietaryName": "Isotretinoin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218194",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ISOTRETINOIN",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240129",
"SamplePackage": "N",
"IndicationAndUsage": "Isotretinoin capsules are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, isotretinoin capsules are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use. If a second course of isotretinoin capsules treatment is needed, it is not recommended before a 2-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of treatment [see Dosage and Administration (2.2)].",
"Description": "Isotretinoin capsules, USP contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin USP (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin USP, each capsule contains the following inactive ingredients: propyl gallate, sorbitan monooleate, soybean oil and stearoyl polyoxylglycerides. The gelatin capsules contain the following dye systems:. The black imprinting ink of 10 mg and 20 mg capsules contain the following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac. The white imprinting ink of 25 mg, 30 mg, 35 mg and 40 mg capsules contain the following ingredients: potassium hydroxide, propylene glycol, shellac and titanium dioxide. In addition 10 mg and 20 mg capsules contain band sealing composition: gelatin and polysorbate 80. Isotretinoin. Chemically, isotretinoin USP is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow or light-orange, crystalline powder with a molecular weight of 300.44. It is practically insoluble in water, soluble in methylene chloride, slightly soluble in alcohol. The structural formula is. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "62332-634-06",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (62332-634-06) / 6 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "62332-0634-06",
"ProductNDC": "62332-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dabigatran Etexilate",
"NonProprietaryName": "Dabigatran Etexilate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215233",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "DABIGATRAN ETEXILATE MESYLATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240614",
"SamplePackage": "N",
"IndicationAndUsage": "Dabigatran etexilate capsules are a direct thrombin inhibitor indicated: To reduce the risk of stroke and systemic embolism in adult patients with non-valvular atrial fibrillation (1.1) For the treatment of deep venous thrombosis (DVT) and pulmonary embolism (PE) in adult patients who have been treated with a parenteral anticoagulant for 5 to 10 days (1.2) To reduce the risk of recurrence of DVT and PE in adult patients who have been previously treated (1.3) For the prophylaxis of DVT and PE in adult patients who have undergone hip replacement surgery (1.4) For the treatment of venous thromboembolic events (VTE) in pediatric patients 8 to less than 18 years of age who have been treated with a parenteral anticoagulant for at least 5 days (1.5) To reduce the risk of recurrence of VTE in pediatric patients 8 to less than 18 years of age who have been previously treated (1.6).",
"Description": "The chemical name for dabigatran etexilate mesylate, a direct thrombin inhibitor, is β-Alanine, N-[[2-[[[4-[[[(hexyloxy)carbonyl]amino]iminomethyl]phenyl]amino]methyl]-1-methyl-1H-benzimidazol-5-yl]carbonyl]-N-2-pyridinyl-,ethyl ester, methanesulfonate. The empirical formula is C34H41N7O5⋅ CH4O3S and the molecular weight is 723.86 (mesylate salt), 627.75 (free base). The structural formula is. Dabigatran etexilate mesylate is off-white to yellowish powder. It is freely soluble in methanol and ethanol, practically insoluble in acetone, ethyl acetate and water. Dabigatran etexilate capsules are supplied in 75 mg, 110 mg, and 150 mg strengths for oral administration. Each capsule contains dabigatran etexilate mesylate as the active ingredient: 75 mg dabigatran etexilate (equivalent to 86.48 mg dabigatran etexilate mesylate), 110 mg dabigatran etexilate (equivalent to 126.83 mg dabigatran etexilate mesylate) or 150 mg dabigatran etexilate (equivalent to 172.95 mg dabigatran etexilate mesylate) along with the following inactive ingredients: hydroxypropyl cellulose, hypromellose phthalate, pelletized tartaric acid, talc. The capsule shell is composed of carrageenan, hypromellose, potassium chloride and titanium dioxide. Additionally, 110 mg and 150 mg capsule shell also contains FD&C Blue No. 2. The empty hard hypromellose capsule shells are printed with edible black ink containing iron oxide black, potassium hydroxide and shellac."
},
{
"NDCCode": "68001-634-42",
"PackageDescription": "10 SYRINGE in 1 CARTON (68001-634-42) / .4 mL in 1 SYRINGE (68001-634-43) ",
"NDC11Code": "68001-0634-42",
"ProductNDC": "68001-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20250115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206834",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness ( 1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism ( 1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism ( 1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) ( 1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) ( 1.4) .",
"Description": "Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentrationcontains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentrationcontains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration ( 2) and How Supplied/Storage and Handling ( 16)] ."
},
{
"NDCCode": "68016-634-10",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (68016-634-10) / 100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "68016-0634-10",
"ProductNDC": "68016-634",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19880524",
"EndMarketingDate": "20270228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075010",
"LabelerName": "Chain Drug Consortium",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19880524",
"EndMarketingDatePackage": "20270228",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:headachetoothachebackachemenstrual crampsthe common coldmuscular achesminor pain of arthritis. temporarily reduces fever."
},
{
"NDCCode": "68083-634-10",
"PackageDescription": "10 SYRINGE in 1 CARTON (68083-634-10) / .3 mL in 1 SYRINGE",
"NDC11Code": "68083-0634-10",
"ProductNDC": "68083-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230711",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078990",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230711",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. <2000 daltons ≤20%. 2000 to 8000 daltons ≥68%. >8000 daltons ≤18%. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "70934-634-95",
"PackageDescription": "10 TABLET, ORALLY DISINTEGRATING in 1 BAG (70934-634-95) ",
"NDC11Code": "70934-0634-95",
"ProductNDC": "70934-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20200818",
"EndMarketingDate": "20250531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090469",
"LabelerName": "Denton Pharma, Inc. dba Northwind Pharmaceuticals",
"SubstanceName": "ONDANSETRON",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200831",
"EndMarketingDatePackage": "20250531",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron orally disintegrating tablets are indicated for the prevention of nausea and vomiting associated with: 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m 2, 2 initial and repeat courses of moderately emetogenic cancer chemotherapy, 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen.",
"Description": "The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18H 19N 3O representing a molecular weight of 293.4. Ondansetron is a white to off-white powder. Each 4 mg ondansetron orally disintegrating tablet, USP for oral administration contains 4 mg ondansetron base. Each 8 mg ondansetron orally disintegrating tablet, USP for oral administration contains 8 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2."
},
{
"NDCCode": "71919-634-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-634-10) ",
"NDC11Code": "71919-0634-10",
"ProductNDC": "71919-634",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Solanum Tuberosum",
"NonProprietaryName": "Solanum Tuberosum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20090512",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "SOLANUM TUBEROSUM",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20090512",
"SamplePackage": "N",
"IndicationAndUsage": "Indications:. SOLANUM TUB Faintness."
},
{
"NDCCode": "72485-634-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (72485-634-10) / 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "72485-0634-10",
"ProductNDC": "72485-634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate/timolol Maleate",
"NonProprietaryName": "Brimonidine Tartrate And Timolol Maleate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20231103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201949",
"LabelerName": "ARMAS PHARMACEUTICALS INC",
"SubstanceName": "BRIMONIDINE TARTRATE; TIMOLOL MALEATE",
"StrengthNumber": "2; 5",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Antagonists [MoA], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231103",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate/timolol maleate ophthalmic solution 0.2%/0.5% is an alpha adrenergic receptor agonist with a beta adrenergic receptor inhibitor indicated for the reduction of elevated intraocular pressure (IOP) in patients with glaucoma or ocular hypertension who require adjunctive or replacement therapy due to inadequately controlled IOP; the IOP-lowering of brimonidine tartrate/timolol maleate ophthalmic solution dosed twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol maleate ophthalmic solution dosed twice a day and 0.2% brimonidine tartrate ophthalmic solution dosed three times per day.",
"Description": "Brimonidine tartrate/timolol maleate ophthalmic solution 0.2%/0.5%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist with a non-selective beta-adrenergic receptor inhibitor (topical intraocular pressure lowering agent). The structural formulae are. Brimonidine tartrate. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. Timolol maleate. (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)-oxy]-2-propanol maleate (1:1) (salt); MW= 432.50 as the maleate salt. In solution, brimonidine tartrate/timolol maleate ophthalmic solution 0.2%/0.5% has a clear, greenish-yellow color. It has an osmolality of 260 to 330 mOsmol/kg and a pH during its shelf life of 6.5 to 7.3. Brimonidine tartrate appears as an off-white, or white to pale-yellow powder and is soluble in both water (1.5 mg/mL) and in the product vehicle (3 mg/mL) at pH 7.2. Timolol maleate appears as a white, odorless, crystalline powder and is soluble in water, methanol, and alcohol. Each mL of brimonidine tartrate/timolol maleate ophthalmic solution contains the active ingredients brimonidine tartrate 0.2% and timolol 0.5% with the inactive ingredients benzalkonium chloride 0.005%; dibasic sodium phosphate USP, monobasic sodium phosphate USP, water for injection. Hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "82160-634-01",
"PackageDescription": "1 TUBE, WITH APPLICATOR in 1 CARTON (82160-634-01) / 10 mL in 1 TUBE, WITH APPLICATOR",
"NDC11Code": "82160-0634-01",
"ProductNDC": "82160-634",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mostal Lashes And Brows Enhancing Serum",
"NonProprietaryName": "Pyrus Malus (apple) Fruit Extract, Acetyl Tetrapeptide-3, Biotinoyl Tripeptide-1",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200930",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Pella Pharmaceuticals Co. Ltd",
"SubstanceName": "ACETYL TETRAPEPTIDE-3; APPLE; BIOTINOYL TRIPEPTIDE-1",
"StrengthNumber": "1; 100; .066",
"StrengthUnit": "mg/10mL; mg/10mL; mg/10mL",
"Pharm_Classes": "Allergens [CS], Dietary Proteins [CS], Fruit Proteins [EXT], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Mostal lashes & brows serum is revolutionary serum of lashes and brows enhancing, conditioning, moisturizing and strengthening ingredients that work together to help improve the overall appearance of the eyelashes and eyebrows. Five key ingredients benefits: : 1 Pyrus Malus (Apple) Fruit Extract (Procyanidine B2): Helps to stop hair loss from eyelashes and eyebrows, improves their growth and increase their density. , 2 Panthenol: Moisturizes and strengthens hair; improves texture, suppleness and sheen; increases durability and flexibility. , 3 Acetyl Tetrapeptide-3: Helps to promote regrowth and build stronger cellular matrices around the dermal papilla, which means that lashes and brows will be better anchored for less chance of fall out. , 4 Biotionyl Tripeptide-1: Helps lashes and brows appear longer, fuller and stronger. Promotes hair bulb keratinocyte production and ensures optimal hair anchorage, helping lashes reach their full potential. , 5 Trifolium Pratense (Clover) Flower Extract: thanks to its high content of Biochanin A isoflavone, has showed antioxidant properties useful in fighting free radicals, counteracting the damage created by the external environment and stressful conditions. .",
"Description": "Advanced revitalizing formula for longer, stronger, fuller lashes and brows, formulated with a powerful peptide complex and vitamins with natural vegan extracts work together for longer, fuller and more voluminous lashes and bolder brows. Does not change eyelash or brow color, Paraben Free."
},
{
"NDCCode": "70756-006-99",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (70756-006-99) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "70756-0006-99",
"ProductNDC": "70756-006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rivaroxaban",
"NonProprietaryName": "Rivaroxaban",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20261001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220874",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "RIVAROXABAN",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20261001",
"SamplePackage": "N",
"IndicationAndUsage": "Rivaroxaban tablets are a factor Xa inhibitor indicated: 1 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 2 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8).",
"Description": "Rivaroxaban, USP a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban, USP is sparingly soluble in dimethyl formamide and practically insoluble in water. Each rivaroxaban tablet, USP contains 2.5 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: croscarmellose sodium, hydroxy propyl methyl cellulose, magnesium stearate, microcrystalline cellulose (PH 101), microcrystalline cellulose (PH 102), lactose monohydrate, sodium lauryl sulphate. Additionally, the proprietary film coating mixture used for rivaroxaban tablets, USP 2.5 mg is Opadry Yellow containing hypromellose, titanium dioxide, polyethylene glycol 3350, iron oxide yellow. FDA-approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70756-048-99",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (70756-048-99) / 10 TABLET, FILM COATED in 1 BLISTER PACK (70756-048-01) ",
"NDC11Code": "70756-0048-99",
"ProductNDC": "70756-048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ticagrelor",
"NonProprietaryName": "Ticagrelor",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217679",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "TICAGRELOR",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P-Glycoprotein Inhibitors [MoA], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260206",
"SamplePackage": "N",
"IndicationAndUsage": "Ticagrelor tablets are P2Y12 platelet inhibitor indicated: 1 to reduce the risk of a first MI or stroke in patients with coronary artery disease (CAD) at high risk for such events. While use is not limited to this setting, the efficacy of ticagrelor tablets was established in a population with type 2 diabetes mellitus (T2DM). (1.2), 2 to reduce the risk of stroke in patients with acute ischemic stroke (NIH Stroke Scale score ≤5) or high-risk transient ischemic attack (TIA). (1.3).",
"Description": "Ticagrelor tablets contains ticagrelor, a cyclopentyltriazolopyrimidine, inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP-receptor. Chemically it is (1S,2S,3R,5S)-3-[7-[[(1R,2S)-2-(3,4-difluorophenyl)cyclopropyl]amino]-5-(propylsulfanyl)-3H-[1,2,3] triazolo[4,5-d]-pyrimidin-3-yl]-5-(2-hydroxyethoxy)cyclopentane-1,2-diol The molecular formula of ticagrelor is C23H28F2N6O4S and its molecular weight is 522.6. The chemical structure of ticagrelor is. Ticagrelor is off white to pale pink powder with an aqueous solubility of approximately 10 mcg/mL at room temperature. It is freely soluble in dimethylsulphoxide, sparingly soluble in methanol, and insoluble in water. Ticagrelor tablets for oral administration contain 60 mg or 90 mg of ticagrelor and the following ingredients: croscarmellose sodium, dicalcium phosphate dihydrate, hypromellose, magnesium stearate, mannitol, polyethylene glycol, povidone, and titanium dioxide. The 60 mg tablets also contain D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, and FD&C red #40 aluminum lake. The 90 mg tablets also contain talc."
},
{
"NDCCode": "70756-288-99",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (70756-288-99) / 10 TABLET in 1 BLISTER PACK (70756-288-01) ",
"NDC11Code": "70756-0288-99",
"ProductNDC": "70756-288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215885",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240325",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "70756-289-99",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (70756-289-99) / 10 TABLET in 1 BLISTER PACK (70756-289-01) ",
"NDC11Code": "70756-0289-99",
"ProductNDC": "70756-289",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215885",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240325",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "70756-312-99",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (70756-312-99) / 10 TABLET in 1 BLISTER PACK (70756-312-01) ",
"NDC11Code": "70756-0312-99",
"ProductNDC": "70756-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218157",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241015",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).",
"Description": "Telmisartan, USP is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C33H30N4O2 , its molecular weight is 514.62, and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture."
},
{
"NDCCode": "70756-313-80",
"PackageDescription": "8 BLISTER PACK in 1 CARTON (70756-313-80) / 10 TABLET in 1 BLISTER PACK (70756-313-01) ",
"NDC11Code": "70756-0313-80",
"ProductNDC": "70756-313",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218157",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241015",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).",
"Description": "Telmisartan, USP is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C33H30N4O2 , its molecular weight is 514.62, and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture."
},
{
"NDCCode": "70756-314-80",
"PackageDescription": "8 BLISTER PACK in 1 CARTON (70756-314-80) / 10 TABLET in 1 BLISTER PACK (70756-314-01) ",
"NDC11Code": "70756-0314-80",
"ProductNDC": "70756-314",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan",
"NonProprietaryName": "Telmisartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218157",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "TELMISARTAN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241015",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).",
"Description": "Telmisartan, USP is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C33H30N4O2 , its molecular weight is 514.62, and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70756-634-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70756-634-10) / 20 mL in 1 VIAL (70756-634-87) </PackageDescription>
<NDC11Code>70756-0634-10</NDC11Code>
<ProductNDC>70756-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217354</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants.</IndicationAndUsage>
<Description>Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3 MW 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection is a clear, colorless, sterile liquid; pH 2.0 – 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>70756-634-25</NDCCode>
<PackageDescription>25 CARTON in 1 CARTON (70756-634-25) / 10 VIAL in 1 CARTON (70756-634-10) / 20 mL in 1 VIAL (70756-634-87) </PackageDescription>
<NDC11Code>70756-0634-25</NDC11Code>
<ProductNDC>70756-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217354</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycopyrrolate Injection is an anticholinergic indicated. in anesthesia (adult and pediatric patients): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation., 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias., 3 for protection against peripheral muscarinic effects of cholinergic agents. (1).</IndicationAndUsage>
<Description>Glycopyrrolate is a synthetic anticholinergic agent. It is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows:. C19H28BrNO3 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. Glycopyrrolate injection, USP is a clear, colorless, sterile liquid with a pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C). Glycopyrrolate injection, USP is intended for intramuscular or intravenous administration. Each 1 mL contains 0.2 mg of glycopyrrolate, water for injection, benzyl alcohol is used as preservative and hydrochloric acid and/or sodium hydroxide as pH adjusters.</Description>
</NDC>
<NDC>
<NDCCode>10019-634-01</NDCCode>
<PackageDescription>10 VIAL in 1 PACKAGE (10019-634-01) > 4 mL in 1 VIAL (10019-634-31)</PackageDescription>
<NDC11Code>10019-0634-01</NDC11Code>
<ProductNDC>10019-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin And Sulbactam</ProprietaryName>
<NonProprietaryName>Ampicillin, Sulbactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065406</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>AMPICILLIN SODIUM; SULBACTAM SODIUM</SubstanceName>
<StrengthNumber>250; 125</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [Chemical/Ingredient],beta Lactamase Inhibitors [MoA],beta Lactamase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>13668-634-74</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (13668-634-74) / 10 TABLET in 1 BLISTER PACK (13668-634-71) </PackageDescription>
<NDC11Code>13668-0634-74</NDC11Code>
<ProductNDC>13668-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>24; 26</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>41250-634-10</NDCCode>
<PackageDescription>2 BOTTLE in 1 CARTON (41250-634-10) / 144 SPRAY, METERED in 1 BOTTLE</PackageDescription>
<NDC11Code>41250-0634-10</NDC11Code>
<ProductNDC>41250-634</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20160527</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207957</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily relieves these symptoms of hay fever or other upper respiratory allergies: 1 nasal congestion, 2 itchy nose, 3 runny nose, 4 itchy, watery eyes, 5 sneezing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43547-634-10</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (43547-634-10) </PackageDescription>
<NDC11Code>43547-0634-10</NDC11Code>
<ProductNDC>43547-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217531</ApplicationNumber>
<LabelerName>Solco Healthcare US,LLC</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dicyclomine hydrochloride is indicated for the treatment of patients with functional bowel/irritable bowel syndrome.</IndicationAndUsage>
<Description>Dicyclomine hydrochloride capsules are an antispasmodic and anticholinergic (antimuscarinic) agent available in the following dosage forms: 1 Dicyclomine hydrochloride capsules USP, for oral use, contain 10 mg dicyclomine hydrochloride USP. Dicyclomine hydrochloride 10 mg capsules also contain inactive ingredients: calcium sulfate dihydrate, lactose monohydrate, and magnesium stearate., 2 In addition, the capsule shells contain Gelatin, Sodium Lauryl Sulfate, and Titanium Dioxide. The imprinting ink contains D&C yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, iron oxide black, potassium hydroxide and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>43858-634-01</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (43858-634-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>43858-0634-01</NDC11Code>
<ProductNDC>43858-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
<NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20050509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065169</ApplicationNumber>
<LabelerName>Sandoz GmbH</LabelerName>
<SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>46708-634-06</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (46708-634-06) / 6 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0634-06</NDC11Code>
<ProductNDC>46708-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dabigatran Etexilate</ProprietaryName>
<NonProprietaryName>Dabigatran Etexilate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215233</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DABIGATRAN ETEXILATE MESYLATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dabigatran etexilate capsules are a direct thrombin inhibitor indicated: To reduce the risk of stroke and systemic embolism in adult patients with non-valvular atrial fibrillation (1.1) For the treatment of deep venous thrombosis (DVT) and pulmonary embolism (PE) in adult patients who have been treated with a parenteral anticoagulant for 5 to 10 days (1.2) To reduce the risk of recurrence of DVT and PE in adult patients who have been previously treated (1.3) For the prophylaxis of DVT and PE in adult patients who have undergone hip replacement surgery (1.4) For the treatment of venous thromboembolic events (VTE) in pediatric patients 8 to less than 18 years of age who have been treated with a parenteral anticoagulant for at least 5 days (1.5) To reduce the risk of recurrence of VTE in pediatric patients 8 to less than 18 years of age who have been previously treated (1.6).</IndicationAndUsage>
<Description>The chemical name for dabigatran etexilate mesylate, a direct thrombin inhibitor, is β-Alanine, N-[[2-[[[4-[[[(hexyloxy)carbonyl]amino]iminomethyl]phenyl]amino]methyl]-1-methyl-1H-benzimidazol-5-yl]carbonyl]-N-2-pyridinyl-,ethyl ester, methanesulfonate. The empirical formula is C34H41N7O5⋅ CH4O3S and the molecular weight is 723.86 (mesylate salt), 627.75 (free base). The structural formula is. Dabigatran etexilate mesylate is off-white to yellowish powder. It is freely soluble in methanol and ethanol, practically insoluble in acetone, ethyl acetate and water. Dabigatran etexilate capsules are supplied in 75 mg, 110 mg, and 150 mg strengths for oral administration. Each capsule contains dabigatran etexilate mesylate as the active ingredient: 75 mg dabigatran etexilate (equivalent to 86.48 mg dabigatran etexilate mesylate), 110 mg dabigatran etexilate (equivalent to 126.83 mg dabigatran etexilate mesylate) or 150 mg dabigatran etexilate (equivalent to 172.95 mg dabigatran etexilate mesylate) along with the following inactive ingredients: hydroxypropyl cellulose, hypromellose phthalate, pelletized tartaric acid, talc. The capsule shell is composed of carrageenan, hypromellose, potassium chloride and titanium dioxide. Additionally, 110 mg and 150 mg capsule shell also contains FD&C Blue No. 2. The empty hard hypromellose capsule shells are printed with edible black ink containing iron oxide black, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>49348-634-01</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (49348-634-01) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49348-0634-01</NDC11Code>
<ProductNDC>49348-634</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunmark Loratadine</ProprietaryName>
<ProprietaryNameSuffix>Allergy Relief</ProprietaryNameSuffix>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075990</ApplicationNumber>
<LabelerName>McKesson</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>49348-634-47</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (49348-634-47) > 10 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49348-0634-47</NDC11Code>
<ProductNDC>49348-634</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunmark Loratadine</ProprietaryName>
<ProprietaryNameSuffix>Allergy Relief</ProprietaryNameSuffix>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075990</ApplicationNumber>
<LabelerName>McKesson</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>49349-634-10</NDCCode>
<PackageDescription>6 TABLET in 1 VIAL (49349-634-10)</PackageDescription>
<NDC11Code>49349-0634-10</NDC11Code>
<ProductNDC>49349-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin Hydrochloride</ProprietaryName>
<NonProprietaryName>Ciprofloxacin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075593</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-14</LastUpdate>
</NDC>
<NDC>
<NDCCode>50742-634-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-634-10) </PackageDescription>
<NDC11Code>50742-0634-10</NDC11Code>
<ProductNDC>50742-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin</ProprietaryName>
<NonProprietaryName>Metformin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209674</ApplicationNumber>
<LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are a biguanide indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (1).</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets contain the biguanidine antihyperglycemic agent, metformin, in the form of monohydrochloride salt. The chemical name of metformin HCl is N, N-dimethylimidodicarbonimidic diamide hydrochloride with a molecular formula of C4H11N5HCl and a molecular weight of 165.63. Its structural formula is. Metformin HCl is a white to off-white crystalline powder that is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin HCl is 6.68. Metformin hydrochloride extended-release tablets deliver 500 mg or 1,000 mg of metformin HCl, which is equivalent to 389.93 mg or 779.86 mg metformin, respectively. In addition to the active ingredient metformin HCl, each tablet contains the following inactive ingredients: ethylcellulose, hydroxypropyl cellulose, hypromellose, magnesium stearate, povidone, triethyl citrate, titanium dioxide, polydextrose, triacetin, macrogol/PEG. Product Meets USP Dissolution Test 23.</Description>
</NDC>
<NDC>
<NDCCode>57664-634-44</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (57664-634-44) > 5 mL in 1 VIAL (57664-634-41) </PackageDescription>
<NDC11Code>57664-0634-44</NDC11Code>
<ProductNDC>57664-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120808</StartMarketingDate>
<EndMarketingDate>20180629</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090850</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-06-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120808</StartMarketingDatePackage>
<EndMarketingDatePackage>20180629</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>57664-634-45</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (57664-634-45) > 10 mL in 1 VIAL (57664-634-42) </PackageDescription>
<NDC11Code>57664-0634-45</NDC11Code>
<ProductNDC>57664-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20120808</StartMarketingDate>
<EndMarketingDate>20180629</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090850</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-06-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120808</StartMarketingDatePackage>
<EndMarketingDatePackage>20180629</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59651-634-03</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (59651-634-03) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>59651-0634-03</NDC11Code>
<ProductNDC>59651-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isotretinoin</ProprietaryName>
<NonProprietaryName>Isotretinoin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218194</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ISOTRETINOIN</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isotretinoin capsules are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, isotretinoin capsules are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use. If a second course of isotretinoin capsules treatment is needed, it is not recommended before a 2-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of treatment [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Isotretinoin capsules, USP contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin USP (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin USP, each capsule contains the following inactive ingredients: propyl gallate, sorbitan monooleate, soybean oil and stearoyl polyoxylglycerides. The gelatin capsules contain the following dye systems:. The black imprinting ink of 10 mg and 20 mg capsules contain the following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac. The white imprinting ink of 25 mg, 30 mg, 35 mg and 40 mg capsules contain the following ingredients: potassium hydroxide, propylene glycol, shellac and titanium dioxide. In addition 10 mg and 20 mg capsules contain band sealing composition: gelatin and polysorbate 80. Isotretinoin. Chemically, isotretinoin USP is 13-cis-retinoic acid and is related to both retinoic acid and retinol (vitamin A). It is a yellow or light-orange, crystalline powder with a molecular weight of 300.44. It is practically insoluble in water, soluble in methylene chloride, slightly soluble in alcohol. The structural formula is. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>62332-634-06</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (62332-634-06) / 6 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>62332-0634-06</NDC11Code>
<ProductNDC>62332-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dabigatran Etexilate</ProprietaryName>
<NonProprietaryName>Dabigatran Etexilate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215233</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DABIGATRAN ETEXILATE MESYLATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dabigatran etexilate capsules are a direct thrombin inhibitor indicated: To reduce the risk of stroke and systemic embolism in adult patients with non-valvular atrial fibrillation (1.1) For the treatment of deep venous thrombosis (DVT) and pulmonary embolism (PE) in adult patients who have been treated with a parenteral anticoagulant for 5 to 10 days (1.2) To reduce the risk of recurrence of DVT and PE in adult patients who have been previously treated (1.3) For the prophylaxis of DVT and PE in adult patients who have undergone hip replacement surgery (1.4) For the treatment of venous thromboembolic events (VTE) in pediatric patients 8 to less than 18 years of age who have been treated with a parenteral anticoagulant for at least 5 days (1.5) To reduce the risk of recurrence of VTE in pediatric patients 8 to less than 18 years of age who have been previously treated (1.6).</IndicationAndUsage>
<Description>The chemical name for dabigatran etexilate mesylate, a direct thrombin inhibitor, is β-Alanine, N-[[2-[[[4-[[[(hexyloxy)carbonyl]amino]iminomethyl]phenyl]amino]methyl]-1-methyl-1H-benzimidazol-5-yl]carbonyl]-N-2-pyridinyl-,ethyl ester, methanesulfonate. The empirical formula is C34H41N7O5⋅ CH4O3S and the molecular weight is 723.86 (mesylate salt), 627.75 (free base). The structural formula is. Dabigatran etexilate mesylate is off-white to yellowish powder. It is freely soluble in methanol and ethanol, practically insoluble in acetone, ethyl acetate and water. Dabigatran etexilate capsules are supplied in 75 mg, 110 mg, and 150 mg strengths for oral administration. Each capsule contains dabigatran etexilate mesylate as the active ingredient: 75 mg dabigatran etexilate (equivalent to 86.48 mg dabigatran etexilate mesylate), 110 mg dabigatran etexilate (equivalent to 126.83 mg dabigatran etexilate mesylate) or 150 mg dabigatran etexilate (equivalent to 172.95 mg dabigatran etexilate mesylate) along with the following inactive ingredients: hydroxypropyl cellulose, hypromellose phthalate, pelletized tartaric acid, talc. The capsule shell is composed of carrageenan, hypromellose, potassium chloride and titanium dioxide. Additionally, 110 mg and 150 mg capsule shell also contains FD&C Blue No. 2. The empty hard hypromellose capsule shells are printed with edible black ink containing iron oxide black, potassium hydroxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68001-634-42</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (68001-634-42) / .4 mL in 1 SYRINGE (68001-634-43) </PackageDescription>
<NDC11Code>68001-0634-42</NDC11Code>
<ProductNDC>68001-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206834</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness ( 1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism ( 1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism ( 1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) ( 1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) ( 1.4) .</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection, USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4,500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin Sodium Injection, USP 100 mg per mL Concentrationcontains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin Sodium Injection, USP 150 mg per mL Concentrationcontains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1,500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Enoxaparin Sodium Injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration ( 2) and How Supplied/Storage and Handling ( 16)] .</Description>
</NDC>
<NDC>
<NDCCode>68016-634-10</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (68016-634-10) / 100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>68016-0634-10</NDC11Code>
<ProductNDC>68016-634</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880524</StartMarketingDate>
<EndMarketingDate>20270228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075010</ApplicationNumber>
<LabelerName>Chain Drug Consortium</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19880524</StartMarketingDatePackage>
<EndMarketingDatePackage>20270228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:headachetoothachebackachemenstrual crampsthe common coldmuscular achesminor pain of arthritis. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68083-634-10</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (68083-634-10) / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>68083-0634-10</NDC11Code>
<ProductNDC>68083-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230711</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078990</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. <2000 daltons ≤20%. 2000 to 8000 daltons ≥68%. >8000 daltons ≤18%. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>70934-634-95</NDCCode>
<PackageDescription>10 TABLET, ORALLY DISINTEGRATING in 1 BAG (70934-634-95) </PackageDescription>
<NDC11Code>70934-0634-95</NDC11Code>
<ProductNDC>70934-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200818</StartMarketingDate>
<EndMarketingDate>20250531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090469</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. dba Northwind Pharmaceuticals</LabelerName>
<SubstanceName>ONDANSETRON</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<EndMarketingDatePackage>20250531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron orally disintegrating tablets are indicated for the prevention of nausea and vomiting associated with: 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m 2, 2 initial and repeat courses of moderately emetogenic cancer chemotherapy, 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen.</IndicationAndUsage>
<Description>The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula: The molecular formula is C 18H 19N 3O representing a molecular weight of 293.4. Ondansetron is a white to off-white powder. Each 4 mg ondansetron orally disintegrating tablet, USP for oral administration contains 4 mg ondansetron base. Each 8 mg ondansetron orally disintegrating tablet, USP for oral administration contains 8 mg ondansetron base. Each ondansetron orally disintegrating tablet, USP also contains the inactive ingredients mannitol, crospovidone, lactose monohydrate, microcrystalline cellulose, aspartame, strawberry guarana flavor, colloidal silicon dioxide, and magnesium stearate. The strawberry guarana flavor contains maltodextrin, propylene glycol, artificial flavors, and acetic acid. Ondansetron orally disintegrating tablets, USP are orally administered formulation of ondansetron which disintegrates on the tongue and does not require water to aid dissolution or swallowing. Meets USP Disintegration Test 2.</Description>
</NDC>
<NDC>
<NDCCode>71919-634-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-634-10) </PackageDescription>
<NDC11Code>71919-0634-10</NDC11Code>
<ProductNDC>71919-634</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Solanum Tuberosum</ProprietaryName>
<NonProprietaryName>Solanum Tuberosum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090512</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>SOLANUM TUBEROSUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications:. SOLANUM TUB Faintness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>72485-634-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (72485-634-10) / 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>72485-0634-10</NDC11Code>
<ProductNDC>72485-634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate/timolol Maleate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate And Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20231103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201949</ApplicationNumber>
<LabelerName>ARMAS PHARMACEUTICALS INC</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE; TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>2; 5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Antagonists [MoA], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate/timolol maleate ophthalmic solution 0.2%/0.5% is an alpha adrenergic receptor agonist with a beta adrenergic receptor inhibitor indicated for the reduction of elevated intraocular pressure (IOP) in patients with glaucoma or ocular hypertension who require adjunctive or replacement therapy due to inadequately controlled IOP; the IOP-lowering of brimonidine tartrate/timolol maleate ophthalmic solution dosed twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol maleate ophthalmic solution dosed twice a day and 0.2% brimonidine tartrate ophthalmic solution dosed three times per day.</IndicationAndUsage>
<Description>Brimonidine tartrate/timolol maleate ophthalmic solution 0.2%/0.5%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist with a non-selective beta-adrenergic receptor inhibitor (topical intraocular pressure lowering agent). The structural formulae are. Brimonidine tartrate. 5-bromo-6-(2-imidazolidinylideneamino) quinoxaline L-tartrate; MW= 442.24. Timolol maleate. (-)-1-( tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)-oxy]-2-propanol maleate (1:1) (salt); MW= 432.50 as the maleate salt. In solution, brimonidine tartrate/timolol maleate ophthalmic solution 0.2%/0.5% has a clear, greenish-yellow color. It has an osmolality of 260 to 330 mOsmol/kg and a pH during its shelf life of 6.5 to 7.3. Brimonidine tartrate appears as an off-white, or white to pale-yellow powder and is soluble in both water (1.5 mg/mL) and in the product vehicle (3 mg/mL) at pH 7.2. Timolol maleate appears as a white, odorless, crystalline powder and is soluble in water, methanol, and alcohol. Each mL of brimonidine tartrate/timolol maleate ophthalmic solution contains the active ingredients brimonidine tartrate 0.2% and timolol 0.5% with the inactive ingredients benzalkonium chloride 0.005%; dibasic sodium phosphate USP, monobasic sodium phosphate USP, water for injection. Hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>82160-634-01</NDCCode>
<PackageDescription>1 TUBE, WITH APPLICATOR in 1 CARTON (82160-634-01) / 10 mL in 1 TUBE, WITH APPLICATOR</PackageDescription>
<NDC11Code>82160-0634-01</NDC11Code>
<ProductNDC>82160-634</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mostal Lashes And Brows Enhancing Serum</ProprietaryName>
<NonProprietaryName>Pyrus Malus (apple) Fruit Extract, Acetyl Tetrapeptide-3, Biotinoyl Tripeptide-1</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200930</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Pella Pharmaceuticals Co. Ltd</LabelerName>
<SubstanceName>ACETYL TETRAPEPTIDE-3; APPLE; BIOTINOYL TRIPEPTIDE-1</SubstanceName>
<StrengthNumber>1; 100; .066</StrengthNumber>
<StrengthUnit>mg/10mL; mg/10mL; mg/10mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Dietary Proteins [CS], Fruit Proteins [EXT], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mostal lashes & brows serum is revolutionary serum of lashes and brows enhancing, conditioning, moisturizing and strengthening ingredients that work together to help improve the overall appearance of the eyelashes and eyebrows. Five key ingredients benefits: : 1 Pyrus Malus (Apple) Fruit Extract (Procyanidine B2): Helps to stop hair loss from eyelashes and eyebrows, improves their growth and increase their density. , 2 Panthenol: Moisturizes and strengthens hair; improves texture, suppleness and sheen; increases durability and flexibility. , 3 Acetyl Tetrapeptide-3: Helps to promote regrowth and build stronger cellular matrices around the dermal papilla, which means that lashes and brows will be better anchored for less chance of fall out. , 4 Biotionyl Tripeptide-1: Helps lashes and brows appear longer, fuller and stronger. Promotes hair bulb keratinocyte production and ensures optimal hair anchorage, helping lashes reach their full potential. , 5 Trifolium Pratense (Clover) Flower Extract: thanks to its high content of Biochanin A isoflavone, has showed antioxidant properties useful in fighting free radicals, counteracting the damage created by the external environment and stressful conditions. .</IndicationAndUsage>
<Description>Advanced revitalizing formula for longer, stronger, fuller lashes and brows, formulated with a powerful peptide complex and vitamins with natural vegan extracts work together for longer, fuller and more voluminous lashes and bolder brows. Does not change eyelash or brow color, Paraben Free.</Description>
</NDC>
<NDC>
<NDCCode>70756-006-99</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (70756-006-99) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70756-0006-99</NDC11Code>
<ProductNDC>70756-006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rivaroxaban</ProprietaryName>
<NonProprietaryName>Rivaroxaban</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20261001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220874</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>RIVAROXABAN</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20261001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rivaroxaban tablets are a factor Xa inhibitor indicated: 1 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 2 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8).</IndicationAndUsage>
<Description>Rivaroxaban, USP a factor Xa (FXa) inhibitor, is the active ingredient in rivaroxaban tablets, USP with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban, USP is C19H18ClN3O5S and the molecular weight is 435.89. The structural formula is. Rivaroxaban, USP is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban, USP is sparingly soluble in dimethyl formamide and practically insoluble in water. Each rivaroxaban tablet, USP contains 2.5 mg of rivaroxaban, USP. The inactive ingredients of rivaroxaban tablets, USP are: croscarmellose sodium, hydroxy propyl methyl cellulose, magnesium stearate, microcrystalline cellulose (PH 101), microcrystalline cellulose (PH 102), lactose monohydrate, sodium lauryl sulphate. Additionally, the proprietary film coating mixture used for rivaroxaban tablets, USP 2.5 mg is Opadry Yellow containing hypromellose, titanium dioxide, polyethylene glycol 3350, iron oxide yellow. FDA-approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70756-048-99</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (70756-048-99) / 10 TABLET, FILM COATED in 1 BLISTER PACK (70756-048-01) </PackageDescription>
<NDC11Code>70756-0048-99</NDC11Code>
<ProductNDC>70756-048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ticagrelor</ProprietaryName>
<NonProprietaryName>Ticagrelor</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217679</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>TICAGRELOR</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P-Glycoprotein Inhibitors [MoA], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ticagrelor tablets are P2Y12 platelet inhibitor indicated: 1 to reduce the risk of a first MI or stroke in patients with coronary artery disease (CAD) at high risk for such events. While use is not limited to this setting, the efficacy of ticagrelor tablets was established in a population with type 2 diabetes mellitus (T2DM). (1.2), 2 to reduce the risk of stroke in patients with acute ischemic stroke (NIH Stroke Scale score ≤5) or high-risk transient ischemic attack (TIA). (1.3).</IndicationAndUsage>
<Description>Ticagrelor tablets contains ticagrelor, a cyclopentyltriazolopyrimidine, inhibitor of platelet activation and aggregation mediated by the P2Y12 ADP-receptor. Chemically it is (1S,2S,3R,5S)-3-[7-[[(1R,2S)-2-(3,4-difluorophenyl)cyclopropyl]amino]-5-(propylsulfanyl)-3H-[1,2,3] triazolo[4,5-d]-pyrimidin-3-yl]-5-(2-hydroxyethoxy)cyclopentane-1,2-diol The molecular formula of ticagrelor is C23H28F2N6O4S and its molecular weight is 522.6. The chemical structure of ticagrelor is. Ticagrelor is off white to pale pink powder with an aqueous solubility of approximately 10 mcg/mL at room temperature. It is freely soluble in dimethylsulphoxide, sparingly soluble in methanol, and insoluble in water. Ticagrelor tablets for oral administration contain 60 mg or 90 mg of ticagrelor and the following ingredients: croscarmellose sodium, dicalcium phosphate dihydrate, hypromellose, magnesium stearate, mannitol, polyethylene glycol, povidone, and titanium dioxide. The 60 mg tablets also contain D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, and FD&C red #40 aluminum lake. The 90 mg tablets also contain talc.</Description>
</NDC>
<NDC>
<NDCCode>70756-288-99</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (70756-288-99) / 10 TABLET in 1 BLISTER PACK (70756-288-01) </PackageDescription>
<NDC11Code>70756-0288-99</NDC11Code>
<ProductNDC>70756-288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215885</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>70756-289-99</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (70756-289-99) / 10 TABLET in 1 BLISTER PACK (70756-289-01) </PackageDescription>
<NDC11Code>70756-0289-99</NDC11Code>
<ProductNDC>70756-289</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215885</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen tablets are useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen tablets may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen tablets are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen, USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(4-chlorophenyl)-butanoic acid. The structural formula is. C10H12ClNO2 M.W. 213.66. Baclofen, USP is a white to off-white odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg baclofen, USP. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, dibasic calcium phosphate dihydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>70756-312-99</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (70756-312-99) / 10 TABLET in 1 BLISTER PACK (70756-312-01) </PackageDescription>
<NDC11Code>70756-0312-99</NDC11Code>
<ProductNDC>70756-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218157</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).</IndicationAndUsage>
<Description>Telmisartan, USP is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C33H30N4O2 , its molecular weight is 514.62, and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>70756-313-80</NDCCode>
<PackageDescription>8 BLISTER PACK in 1 CARTON (70756-313-80) / 10 TABLET in 1 BLISTER PACK (70756-313-01) </PackageDescription>
<NDC11Code>70756-0313-80</NDC11Code>
<ProductNDC>70756-313</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218157</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).</IndicationAndUsage>
<Description>Telmisartan, USP is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C33H30N4O2 , its molecular weight is 514.62, and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture.</Description>
</NDC>
<NDC>
<NDCCode>70756-314-80</NDCCode>
<PackageDescription>8 BLISTER PACK in 1 CARTON (70756-314-80) / 10 TABLET in 1 BLISTER PACK (70756-314-01) </PackageDescription>
<NDC11Code>70756-0314-80</NDC11Code>
<ProductNDC>70756-314</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan</ProprietaryName>
<NonProprietaryName>Telmisartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218157</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>TELMISARTAN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan tablets are an angiotensin II receptor blocker (ARB) indicated for: : 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Cardiovascular (CV) risk reduction in patients unable to take ACE inhibitors (1.2).</IndicationAndUsage>
<Description>Telmisartan, USP is a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan, USP is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its molecular formula is C33H30N4O2 , its molecular weight is 514.62, and its structural formula is. Telmisartan, USP is a white to slightly yellowish crystalline powder. It is practically insoluble in water and in the pH range of 3 to 9, sparingly soluble in strong acid (except insoluble in hydrochloric acid), and soluble in strong base. Telmisartan is available as tablets for oral administration, containing 20 mg, 40 mg or 80 mg of telmisartan. The tablets contain the following inactive ingredients: colloidal silicon dioxide, mannitol, meglumine, povidone, sodium hydroxide, and sodium stearyl fumarate. Telmisartan tablets, USP are hygroscopic and require protection from moisture.</Description>
</NDC>
</NDCList>