{
"NDC": [
{
"NDCCode": "70756-665-88",
"PackageDescription": "1 VIAL in 1 CARTON (70756-665-88) / 30 mL in 1 VIAL",
"NDC11Code": "70756-0665-88",
"ProductNDC": "70756-665",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20231129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217692",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231129",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "70756-637-88",
"PackageDescription": "1 VIAL in 1 CARTON (70756-637-88) / 30 mL in 1 VIAL",
"NDC11Code": "70756-0637-88",
"ProductNDC": "70756-637",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyanocobalamin",
"NonProprietaryName": "Cyanocobalamin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; SUBCUTANEOUS",
"StartMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217839",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "CYANOCOBALAMIN",
"StrengthNumber": "1000",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Vitamin B 12 [CS], Vitamin B12 [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial. gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel. Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin injection is also suitable for the vitamin B12 absorption test (Schilling test).",
"Description": "Cyanocobalamin injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.50%. Benzyl Alcohol, 1.5%, is present as a preservative. Sodium acetate and glacial acetic acid are present as buffer. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below."
},
{
"NDCCode": "70756-665-05",
"PackageDescription": "5 VIAL in 1 CARTON (70756-665-05) / 30 mL in 1 VIAL",
"NDC11Code": "70756-0665-05",
"ProductNDC": "70756-665",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20231129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217692",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231129",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "70756-665-10",
"PackageDescription": "10 VIAL in 1 CARTON (70756-665-10) / 30 mL in 1 VIAL",
"NDC11Code": "70756-0665-10",
"ProductNDC": "70756-665",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20231129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217692",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231129",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "70756-665-25",
"PackageDescription": "25 VIAL in 1 CARTON (70756-665-25) / 30 mL in 1 VIAL",
"NDC11Code": "70756-0665-25",
"ProductNDC": "70756-665",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20231129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217692",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231129",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "70756-247-12",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70756-247-12) ",
"NDC11Code": "70756-0247-12",
"ProductNDC": "70756-247",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-247-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70756-247-30) ",
"NDC11Code": "70756-0247-30",
"ProductNDC": "70756-247",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-247-51",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70756-247-51) ",
"NDC11Code": "70756-0247-51",
"ProductNDC": "70756-247",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-247-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (70756-247-90) ",
"NDC11Code": "70756-0247-90",
"ProductNDC": "70756-247",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-248-12",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70756-248-12) ",
"NDC11Code": "70756-0248-12",
"ProductNDC": "70756-248",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-248-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70756-248-30) ",
"NDC11Code": "70756-0248-30",
"ProductNDC": "70756-248",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-248-51",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70756-248-51) ",
"NDC11Code": "70756-0248-51",
"ProductNDC": "70756-248",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-248-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (70756-248-90) ",
"NDC11Code": "70756-0248-90",
"ProductNDC": "70756-248",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-249-12",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (70756-249-12) ",
"NDC11Code": "70756-0249-12",
"ProductNDC": "70756-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-249-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70756-249-30) ",
"NDC11Code": "70756-0249-30",
"ProductNDC": "70756-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-249-51",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70756-249-51) ",
"NDC11Code": "70756-0249-51",
"ProductNDC": "70756-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-249-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (70756-249-90) ",
"NDC11Code": "70756-0249-90",
"ProductNDC": "70756-249",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-250-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (70756-250-30) ",
"NDC11Code": "70756-0250-30",
"ProductNDC": "70756-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-250-51",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (70756-250-51) ",
"NDC11Code": "70756-0250-51",
"ProductNDC": "70756-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "70756-250-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (70756-250-90) ",
"NDC11Code": "70756-0250-90",
"ProductNDC": "70756-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217081",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240105",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated.",
"Description": "Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate."
},
{
"NDCCode": "45802-104-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (45802-104-01) / 240 SPRAY in 1 BOTTLE",
"NDC11Code": "45802-0104-01",
"ProductNDC": "45802-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olopatadine Hydrochloride",
"NonProprietaryName": "Olopatadine Hydrochloride",
"DosageFormName": "SPRAY",
"RouteName": "NASAL",
"StartMarketingDate": "20170614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202853",
"LabelerName": "Padagis Israel Pharmaceuticals Ltd",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "665",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170614",
"SamplePackage": "N",
"IndicationAndUsage": "Olopatadine hydrochloride nasal spray is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.",
"Description": "Olopatadine hydrochloride nasal spray, 665 mcg is a metered-spray solution for nasal administration. Olopatadine hydrochloride, the active component of olopatadine hydrochloride nasal spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88 g/mol, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine hydrochloride nasal spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 µL of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine hydrochloride nasal spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, hydrochloric acid and/or sodium hydroxide (to adjust pH), purified water and sodium chloride."
},
{
"NDCCode": "47781-665-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (47781-665-10) ",
"NDC11Code": "47781-0665-10",
"ProductNDC": "47781-665",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190507",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021116",
"LabelerName": "Alvogen, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "175",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190507",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength."
},
{
"NDCCode": "47781-665-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (47781-665-90) ",
"NDC11Code": "47781-0665-90",
"ProductNDC": "47781-665",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190507",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021116",
"LabelerName": "Alvogen, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "175",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190507",
"EndMarketingDatePackage": "20280930",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength."
},
{
"NDCCode": "50383-943-23",
"PackageDescription": "1 BOTTLE in 1 CARTON (50383-943-23) > 240 SPRAY, METERED in 1 BOTTLE",
"NDC11Code": "50383-0943-23",
"ProductNDC": "50383-943",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olopatadine Hydrochloride",
"NonProprietaryName": "Olopatadine Hydrochloride Nasal",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20200929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213757",
"LabelerName": "Akorn",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "665",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200929",
"SamplePackage": "N",
"IndicationAndUsage": "Olopatadine hydrochloride nasal spray is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.",
"Description": "Olopatadine Hydrochloride Nasal Spray, 665 micrograms (mcg) is a metered-spray solution for intranasal administration. Olopatadine hydrochloride, the active component of Olopatadine Hydrochloride Nasal Spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz [b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine Hydrochloride Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine Hydrochloride Nasal Spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water."
},
{
"NDCCode": "54868-6049-0",
"PackageDescription": "240 SPRAY, METERED in 1 BOTTLE (54868-6049-0)",
"NDC11Code": "54868-6049-00",
"ProductNDC": "54868-6049",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Patanase",
"NonProprietaryName": "Olopatadine Hydrochloride",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20090713",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021861",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "665",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Decreased Histamine Release [PE],Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "PATANASE Nasal Spray is an H1 receptor antagonist indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and children 6 years of age and older. (1).",
"Description": "PATANASE (olopatadine hydrochloride) Nasal Spray, 665 micrograms (mcg) is a metered-spray solution for intranasal administration. Olopatadine hydrochloride, the active component of PATANASE Nasal Spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure. PATANASE Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage and Administration]. PATANASE Nasal Spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water."
},
{
"NDCCode": "59467-700-27",
"PackageDescription": "12 CARTON in 1 BOX (59467-700-27) / 1 BOTTLE, SPRAY in 1 CARTON / 240 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "59467-0700-27",
"ProductNDC": "59467-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ryaltris",
"NonProprietaryName": "Olopatadine Hydrochloride And Mometasone Furoate",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20220815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211746",
"LabelerName": "HIKMA SPECIALTY USA INC.",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE; MOMETASONE FUROATE MONOHYDRATE",
"StrengthNumber": "665; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220815",
"SamplePackage": "N",
"IndicationAndUsage": "RYALTRIS is indicated for the treatment of symptoms of seasonal allergic rhinitis in adult and pediatric patients 12 years of age and older.",
"Description": "RYALTRIS is a metered-dose manual nasal spray unit containing an aqueous suspension of a fixed‑dose combination of a histamine-1 (H1) receptor inhibitor (olopatadine hydrochloride) and a corticosteroid (mometasone furoate monohydrate). Olopatadine hydrochloride is a white, sparingly water‑soluble crystalline powder. The chemical name for olopatadine hydrochloride is 2‑[(11Z)-11-[3-(dimethylamino)propylidene]-6H-benzo[c][1]benzoxepin-2-yl]acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3HCl with the following chemical structure. Mometasone furoate monohydrate is an anti-inflammatory corticosteroid having the chemical name [(8S,9R,10S,11S,13S,14S,16R,17R)-9-chloro-17-(2-chloroacetyl)-11-hydroxy-10,13,16-trimethyl-3-oxo-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl] furan-2-carboxylate;hydrate and the following chemical structure. Mometasone furoate monohydrate is a white powder, with an empirical formula of C27H30Cl2O6H2O and a molecular weight of 539.45. It is practically insoluble in water; slightly soluble in methanol, ethanol, and isopropanol; soluble in acetone and chloroform; and freely soluble in tetrahydrofuran. Its partition coefficient between octanol and water is >5000. RYALTRIS is a nasal spray containing an isotonic aqueous suspension of olopatadine hydrochloride (equivalent to 0.6% w/v olopatadine base) and mometasone furoate monohydrate (equivalent to 0.025% w/w mometasone furoate on the anhydrous basis). After initial priming (6 sprays), each metered spray delivers 100 microliters of suspension containing 665 mcg of olopatadine hydrochloride (equivalent to 600 mcg olopatadine base) and 25 mcg of mometasone furoate. RYALTRIS also contains benzalkonium chloride, carboxymethyl cellulose sodium, dibasic sodium phosphate heptahydrate, edetate disodium, hydrochloric acid, microcrystalline cellulose, polysorbate 80, sodium chloride, sodium hydroxide, and water. It has a pH of approximately 3.7 [see How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "59467-700-84",
"PackageDescription": "12 CARTON in 1 BOX (59467-700-84) / 1 BOTTLE, SPRAY in 1 CARTON / 56 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "59467-0700-84",
"ProductNDC": "59467-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ryaltris",
"NonProprietaryName": "Olopatadine Hydrochloride And Mometasone Furoate",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20220815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211746",
"LabelerName": "HIKMA SPECIALTY USA INC.",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE; MOMETASONE FUROATE MONOHYDRATE",
"StrengthNumber": "665; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220815",
"SamplePackage": "N",
"IndicationAndUsage": "RYALTRIS is indicated for the treatment of symptoms of seasonal allergic rhinitis in adult and pediatric patients 12 years of age and older.",
"Description": "RYALTRIS is a metered-dose manual nasal spray unit containing an aqueous suspension of a fixed‑dose combination of a histamine-1 (H1) receptor inhibitor (olopatadine hydrochloride) and a corticosteroid (mometasone furoate monohydrate). Olopatadine hydrochloride is a white, sparingly water‑soluble crystalline powder. The chemical name for olopatadine hydrochloride is 2‑[(11Z)-11-[3-(dimethylamino)propylidene]-6H-benzo[c][1]benzoxepin-2-yl]acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3HCl with the following chemical structure. Mometasone furoate monohydrate is an anti-inflammatory corticosteroid having the chemical name [(8S,9R,10S,11S,13S,14S,16R,17R)-9-chloro-17-(2-chloroacetyl)-11-hydroxy-10,13,16-trimethyl-3-oxo-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl] furan-2-carboxylate;hydrate and the following chemical structure. Mometasone furoate monohydrate is a white powder, with an empirical formula of C27H30Cl2O6H2O and a molecular weight of 539.45. It is practically insoluble in water; slightly soluble in methanol, ethanol, and isopropanol; soluble in acetone and chloroform; and freely soluble in tetrahydrofuran. Its partition coefficient between octanol and water is >5000. RYALTRIS is a nasal spray containing an isotonic aqueous suspension of olopatadine hydrochloride (equivalent to 0.6% w/v olopatadine base) and mometasone furoate monohydrate (equivalent to 0.025% w/w mometasone furoate on the anhydrous basis). After initial priming (6 sprays), each metered spray delivers 100 microliters of suspension containing 665 mcg of olopatadine hydrochloride (equivalent to 600 mcg olopatadine base) and 25 mcg of mometasone furoate. RYALTRIS also contains benzalkonium chloride, carboxymethyl cellulose sodium, dibasic sodium phosphate heptahydrate, edetate disodium, hydrochloric acid, microcrystalline cellulose, polysorbate 80, sodium chloride, sodium hydroxide, and water. It has a pH of approximately 3.7 [see How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "60505-0845-5",
"PackageDescription": "1 BOTTLE in 1 CARTON (60505-0845-5) / 240 SPRAY, METERED in 1 BOTTLE",
"NDC11Code": "60505-0845-05",
"ProductNDC": "60505-0845",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olopatadine Hydrochloride",
"NonProprietaryName": "Olopatadine Hydrochloride",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20141027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091572",
"LabelerName": "Apotex Corp.",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "665",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141027",
"SamplePackage": "N",
"IndicationAndUsage": "Olopatadine hydrochloride nasal spray is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.",
"Description": "Olopatadine Hydrochloride Nasal Spray, 665 micrograms (mcg) is a metered-spray for nasal administration. Olopatadine hydrochloride, the active component of Olopatadine Hydrochloride Nasal Spray, is a white to off-white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e] oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure:. Olopatadine Hydrochloride Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous spray with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous spray containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine Hydrochloride Nasal Spray also contains anhydrous dibasic sodium phosphate, benzalkonium chloride (0.01%), edetate disodium dihydrate, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water."
},
{
"NDCCode": "61314-320-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (61314-320-01) > 30500 uL in 1 BOTTLE",
"NDC11Code": "61314-0320-01",
"ProductNDC": "61314-320",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olopatadine Hydrochloride",
"NonProprietaryName": "Olopatadine Hydrochloride",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20150401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021861",
"LabelerName": "Sandoz Inc",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "665",
"StrengthUnit": "ug/100uL",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20150401",
"SamplePackage": "N",
"IndicationAndUsage": "Olopatadine Hydrochloride Nasal Spray is an H receptor antagonist indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and children 6 years of age and older.",
"Description": "Olopatadine Hydrochloride Nasal Spray, 665 micrograms (mcg) is a metered-spray solution for intranasal administration. Olopatadine hydrochloride, the active component of Olopatadine Hydrochloride Nasal Spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine Hydrochloride Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine Hydrochloride Nasal Spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water."
},
{
"NDCCode": "63629-8434-1",
"PackageDescription": "1 BOTTLE in 1 CARTON (63629-8434-1) / 240 SPRAY in 1 BOTTLE",
"NDC11Code": "63629-8434-01",
"ProductNDC": "63629-8434",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olopatadine Hydrochloride",
"NonProprietaryName": "Olopatadine Hydrochloride",
"DosageFormName": "SPRAY",
"RouteName": "NASAL",
"StartMarketingDate": "20170614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202853",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "665",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210428",
"SamplePackage": "N",
"IndicationAndUsage": "Olopatadine hydrochloride nasal solution (nasal spray) is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.",
"Description": "Olopatadine hydrochloride nasal solution (nasal spray), 665 mcg is a metered-spray solution for nasal administration. Olopatadine hydrochloride, the active component of olopatadine hydrochloride nasal solution (nasal spray), is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88 g/mol, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine hydrochloride nasal solution (nasal spray) contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 µL of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine hydrochloride nasal solution (nasal spray) also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, hydrochloric acid and/or sodium hydroxide (to adjust pH), purified water and sodium chloride."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70756-665-88</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (70756-665-88) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>70756-0665-88</NDC11Code>
<ProductNDC>70756-665</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20231129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217692</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>70756-637-88</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (70756-637-88) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>70756-0637-88</NDC11Code>
<ProductNDC>70756-637</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyanocobalamin</ProprietaryName>
<NonProprietaryName>Cyanocobalamin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217839</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>CYANOCOBALAMIN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Vitamin B 12 [CS], Vitamin B12 [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyanocobalamin is indicated for vitamin B12 deficiencies due to malabsorption which may be associated with the following conditions. Addisonian (pernicious) anemia. Gastrointestinal pathology, dysfunction, or surgery, including gluten enteropathy or sprue, small bowel bacteria overgrowth, total or partial. gastrectomy. Fish tapeworm infestation. Malignancy of pancreas or bowel. Folic acid deficiency. It may be possible to treat the underlying disease by surgical correction of anatomic lesions leading to small bowel bacterial overgrowth, expulsion of fish tapeworm, discontinuation of drugs leading to vitamin malabsorption (see Drug Interactions), use of a gluten-free diet in nontropical sprue, or administration of antibiotics in tropical sprue. Such measures remove the need for long-term administration of cyanocobalamin. Requirements of vitamin B12 in excess of normal (due to pregnancy, thyrotoxicosis, hemolytic anemia, hemorrhage, malignancy, hepatic and renal disease) can usually be met with oral supplementation. Cyanocobalamin injection is also suitable for the vitamin B12 absorption test (Schilling test).</IndicationAndUsage>
<Description>Cyanocobalamin injection, USP is a sterile solution of cyanocobalamin for intramuscular or subcutaneous injection. Each mL contains 1,000 mcg cyanocobalamin. Each vial also contains Sodium Chloride, 0.50%. Benzyl Alcohol, 1.5%, is present as a preservative. Sodium acetate and glacial acetic acid are present as buffer. Hydrochloric acid and/or sodium hydroxide may have been added during manufacture to adjust the pH (range 4.5-7.0). Cyanocobalamin appears as dark red crystals or as an amorphous or crystalline red powder. It is very hygroscopic in the anhydrous form, and sparingly soluble in water (1:80). The vitamin B12 coenzymes are very unstable in light. The chemical name is 5,6-dimethyl-benzimidazolyl cyanocobamide; the molecular formula is C63H88CoN14O14P. The cobalt content is 4.34%. The molecular weight is 1355.39. The structural formula is represented below.</Description>
</NDC>
<NDC>
<NDCCode>70756-665-05</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (70756-665-05) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>70756-0665-05</NDC11Code>
<ProductNDC>70756-665</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20231129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217692</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>70756-665-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70756-665-10) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>70756-0665-10</NDC11Code>
<ProductNDC>70756-665</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20231129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217692</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>70756-665-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70756-665-25) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>70756-0665-25</NDC11Code>
<ProductNDC>70756-665</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20231129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217692</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2OHCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>70756-247-12</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70756-247-12) </PackageDescription>
<NDC11Code>70756-0247-12</NDC11Code>
<ProductNDC>70756-247</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-247-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70756-247-30) </PackageDescription>
<NDC11Code>70756-0247-30</NDC11Code>
<ProductNDC>70756-247</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-247-51</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70756-247-51) </PackageDescription>
<NDC11Code>70756-0247-51</NDC11Code>
<ProductNDC>70756-247</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-247-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (70756-247-90) </PackageDescription>
<NDC11Code>70756-0247-90</NDC11Code>
<ProductNDC>70756-247</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-248-12</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70756-248-12) </PackageDescription>
<NDC11Code>70756-0248-12</NDC11Code>
<ProductNDC>70756-248</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-248-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70756-248-30) </PackageDescription>
<NDC11Code>70756-0248-30</NDC11Code>
<ProductNDC>70756-248</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-248-51</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70756-248-51) </PackageDescription>
<NDC11Code>70756-0248-51</NDC11Code>
<ProductNDC>70756-248</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-248-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (70756-248-90) </PackageDescription>
<NDC11Code>70756-0248-90</NDC11Code>
<ProductNDC>70756-248</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-249-12</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (70756-249-12) </PackageDescription>
<NDC11Code>70756-0249-12</NDC11Code>
<ProductNDC>70756-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-249-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70756-249-30) </PackageDescription>
<NDC11Code>70756-0249-30</NDC11Code>
<ProductNDC>70756-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-249-51</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70756-249-51) </PackageDescription>
<NDC11Code>70756-0249-51</NDC11Code>
<ProductNDC>70756-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-249-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (70756-249-90) </PackageDescription>
<NDC11Code>70756-0249-90</NDC11Code>
<ProductNDC>70756-249</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-250-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (70756-250-30) </PackageDescription>
<NDC11Code>70756-0250-30</NDC11Code>
<ProductNDC>70756-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-250-51</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (70756-250-51) </PackageDescription>
<NDC11Code>70756-0250-51</NDC11Code>
<ProductNDC>70756-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>70756-250-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (70756-250-90) </PackageDescription>
<NDC11Code>70756-0250-90</NDC11Code>
<ProductNDC>70756-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217081</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets, USP are an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium, USP is 1H-pyrrole-1-heptanoic acid, 2-(4-fluorophenyl)-β,δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-, calcium salt (2:1),[R-(R*, R*)]-; trihydrate. The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca3H2O and its molecular weight is 1209.41. Its structural formula is. Atorvastatin calcium, USP is a white to off-white crystalline powder that is soluble to freely soluble in methanol, slightly soluble in alcohol; insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile, insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.36 mg, 20.72 mg, 41.44 mg, or 82.88 mg atorvastatin calcium anhydrous) and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, Opadry YS -1-7040 (hypromellose, polyethylene glycol, talc and titanium dioxide), polysorbate 80, and precipitated calcium carbonate.</Description>
</NDC>
<NDC>
<NDCCode>45802-104-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (45802-104-01) / 240 SPRAY in 1 BOTTLE</PackageDescription>
<NDC11Code>45802-0104-01</NDC11Code>
<ProductNDC>45802-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20170614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202853</ApplicationNumber>
<LabelerName>Padagis Israel Pharmaceuticals Ltd</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>665</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olopatadine hydrochloride nasal spray is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.</IndicationAndUsage>
<Description>Olopatadine hydrochloride nasal spray, 665 mcg is a metered-spray solution for nasal administration. Olopatadine hydrochloride, the active component of olopatadine hydrochloride nasal spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88 g/mol, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine hydrochloride nasal spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 µL of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine hydrochloride nasal spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, hydrochloric acid and/or sodium hydroxide (to adjust pH), purified water and sodium chloride.</Description>
</NDC>
<NDC>
<NDCCode>47781-665-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (47781-665-10) </PackageDescription>
<NDC11Code>47781-0665-10</NDC11Code>
<ProductNDC>47781-665</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190507</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021116</ApplicationNumber>
<LabelerName>Alvogen, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength.</Description>
</NDC>
<NDC>
<NDCCode>47781-665-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (47781-665-90) </PackageDescription>
<NDC11Code>47781-0665-90</NDC11Code>
<ProductNDC>47781-665</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190507</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021116</ApplicationNumber>
<LabelerName>Alvogen, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190507</StartMarketingDatePackage>
<EndMarketingDatePackage>20280930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine Sodium Tablets are indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: 1 Levothyroxine Sodium Tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with Levothyroxine Sodium Tablets may induce hyperthyroidism [see Warnings and Precautions (5.1)]., 2 Levothyroxine Sodium Tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine Sodium Tablets are L-thyroxine (T4) and contain the active ingredient, levothyroxine, a synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4H2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine Sodium Tablets are for oral administration and are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxytoluene, calcium phosphate dibasic dihydrate, magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, and color additive(s). Table 9 provides a listing of the color additives by tablet strength.</Description>
</NDC>
<NDC>
<NDCCode>50383-943-23</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (50383-943-23) > 240 SPRAY, METERED in 1 BOTTLE</PackageDescription>
<NDC11Code>50383-0943-23</NDC11Code>
<ProductNDC>50383-943</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride Nasal</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20200929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213757</ApplicationNumber>
<LabelerName>Akorn</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>665</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olopatadine hydrochloride nasal spray is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.</IndicationAndUsage>
<Description>Olopatadine Hydrochloride Nasal Spray, 665 micrograms (mcg) is a metered-spray solution for intranasal administration. Olopatadine hydrochloride, the active component of Olopatadine Hydrochloride Nasal Spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz [b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine Hydrochloride Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine Hydrochloride Nasal Spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water.</Description>
</NDC>
<NDC>
<NDCCode>54868-6049-0</NDCCode>
<PackageDescription>240 SPRAY, METERED in 1 BOTTLE (54868-6049-0)</PackageDescription>
<NDC11Code>54868-6049-00</NDC11Code>
<ProductNDC>54868-6049</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Patanase</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20090713</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021861</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>665</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE],Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>PATANASE Nasal Spray is an H1 receptor antagonist indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and children 6 years of age and older. (1).</IndicationAndUsage>
<Description>PATANASE (olopatadine hydrochloride) Nasal Spray, 665 micrograms (mcg) is a metered-spray solution for intranasal administration. Olopatadine hydrochloride, the active component of PATANASE Nasal Spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure. PATANASE Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage and Administration]. PATANASE Nasal Spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water.</Description>
</NDC>
<NDC>
<NDCCode>59467-700-27</NDCCode>
<PackageDescription>12 CARTON in 1 BOX (59467-700-27) / 1 BOTTLE, SPRAY in 1 CARTON / 240 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>59467-0700-27</NDC11Code>
<ProductNDC>59467-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ryaltris</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride And Mometasone Furoate</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20220815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211746</ApplicationNumber>
<LabelerName>HIKMA SPECIALTY USA INC.</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE; MOMETASONE FUROATE MONOHYDRATE</SubstanceName>
<StrengthNumber>665; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>RYALTRIS is indicated for the treatment of symptoms of seasonal allergic rhinitis in adult and pediatric patients 12 years of age and older.</IndicationAndUsage>
<Description>RYALTRIS is a metered-dose manual nasal spray unit containing an aqueous suspension of a fixed‑dose combination of a histamine-1 (H1) receptor inhibitor (olopatadine hydrochloride) and a corticosteroid (mometasone furoate monohydrate). Olopatadine hydrochloride is a white, sparingly water‑soluble crystalline powder. The chemical name for olopatadine hydrochloride is 2‑[(11Z)-11-[3-(dimethylamino)propylidene]-6H-benzo[c][1]benzoxepin-2-yl]acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3HCl with the following chemical structure. Mometasone furoate monohydrate is an anti-inflammatory corticosteroid having the chemical name [(8S,9R,10S,11S,13S,14S,16R,17R)-9-chloro-17-(2-chloroacetyl)-11-hydroxy-10,13,16-trimethyl-3-oxo-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl] furan-2-carboxylate;hydrate and the following chemical structure. Mometasone furoate monohydrate is a white powder, with an empirical formula of C27H30Cl2O6H2O and a molecular weight of 539.45. It is practically insoluble in water; slightly soluble in methanol, ethanol, and isopropanol; soluble in acetone and chloroform; and freely soluble in tetrahydrofuran. Its partition coefficient between octanol and water is >5000. RYALTRIS is a nasal spray containing an isotonic aqueous suspension of olopatadine hydrochloride (equivalent to 0.6% w/v olopatadine base) and mometasone furoate monohydrate (equivalent to 0.025% w/w mometasone furoate on the anhydrous basis). After initial priming (6 sprays), each metered spray delivers 100 microliters of suspension containing 665 mcg of olopatadine hydrochloride (equivalent to 600 mcg olopatadine base) and 25 mcg of mometasone furoate. RYALTRIS also contains benzalkonium chloride, carboxymethyl cellulose sodium, dibasic sodium phosphate heptahydrate, edetate disodium, hydrochloric acid, microcrystalline cellulose, polysorbate 80, sodium chloride, sodium hydroxide, and water. It has a pH of approximately 3.7 [see How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>59467-700-84</NDCCode>
<PackageDescription>12 CARTON in 1 BOX (59467-700-84) / 1 BOTTLE, SPRAY in 1 CARTON / 56 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>59467-0700-84</NDC11Code>
<ProductNDC>59467-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ryaltris</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride And Mometasone Furoate</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20220815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211746</ApplicationNumber>
<LabelerName>HIKMA SPECIALTY USA INC.</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE; MOMETASONE FUROATE MONOHYDRATE</SubstanceName>
<StrengthNumber>665; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>RYALTRIS is indicated for the treatment of symptoms of seasonal allergic rhinitis in adult and pediatric patients 12 years of age and older.</IndicationAndUsage>
<Description>RYALTRIS is a metered-dose manual nasal spray unit containing an aqueous suspension of a fixed‑dose combination of a histamine-1 (H1) receptor inhibitor (olopatadine hydrochloride) and a corticosteroid (mometasone furoate monohydrate). Olopatadine hydrochloride is a white, sparingly water‑soluble crystalline powder. The chemical name for olopatadine hydrochloride is 2‑[(11Z)-11-[3-(dimethylamino)propylidene]-6H-benzo[c][1]benzoxepin-2-yl]acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3HCl with the following chemical structure. Mometasone furoate monohydrate is an anti-inflammatory corticosteroid having the chemical name [(8S,9R,10S,11S,13S,14S,16R,17R)-9-chloro-17-(2-chloroacetyl)-11-hydroxy-10,13,16-trimethyl-3-oxo-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl] furan-2-carboxylate;hydrate and the following chemical structure. Mometasone furoate monohydrate is a white powder, with an empirical formula of C27H30Cl2O6H2O and a molecular weight of 539.45. It is practically insoluble in water; slightly soluble in methanol, ethanol, and isopropanol; soluble in acetone and chloroform; and freely soluble in tetrahydrofuran. Its partition coefficient between octanol and water is >5000. RYALTRIS is a nasal spray containing an isotonic aqueous suspension of olopatadine hydrochloride (equivalent to 0.6% w/v olopatadine base) and mometasone furoate monohydrate (equivalent to 0.025% w/w mometasone furoate on the anhydrous basis). After initial priming (6 sprays), each metered spray delivers 100 microliters of suspension containing 665 mcg of olopatadine hydrochloride (equivalent to 600 mcg olopatadine base) and 25 mcg of mometasone furoate. RYALTRIS also contains benzalkonium chloride, carboxymethyl cellulose sodium, dibasic sodium phosphate heptahydrate, edetate disodium, hydrochloric acid, microcrystalline cellulose, polysorbate 80, sodium chloride, sodium hydroxide, and water. It has a pH of approximately 3.7 [see How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>60505-0845-5</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (60505-0845-5) / 240 SPRAY, METERED in 1 BOTTLE</PackageDescription>
<NDC11Code>60505-0845-05</NDC11Code>
<ProductNDC>60505-0845</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20141027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091572</ApplicationNumber>
<LabelerName>Apotex Corp.</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>665</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olopatadine hydrochloride nasal spray is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.</IndicationAndUsage>
<Description>Olopatadine Hydrochloride Nasal Spray, 665 micrograms (mcg) is a metered-spray for nasal administration. Olopatadine hydrochloride, the active component of Olopatadine Hydrochloride Nasal Spray, is a white to off-white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e] oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure:. Olopatadine Hydrochloride Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous spray with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous spray containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine Hydrochloride Nasal Spray also contains anhydrous dibasic sodium phosphate, benzalkonium chloride (0.01%), edetate disodium dihydrate, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water.</Description>
</NDC>
<NDC>
<NDCCode>61314-320-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (61314-320-01) > 30500 uL in 1 BOTTLE</PackageDescription>
<NDC11Code>61314-0320-01</NDC11Code>
<ProductNDC>61314-320</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20150401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021861</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>665</StrengthNumber>
<StrengthUnit>ug/100uL</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olopatadine Hydrochloride Nasal Spray is an H receptor antagonist indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and children 6 years of age and older.</IndicationAndUsage>
<Description>Olopatadine Hydrochloride Nasal Spray, 665 micrograms (mcg) is a metered-spray solution for intranasal administration. Olopatadine hydrochloride, the active component of Olopatadine Hydrochloride Nasal Spray, is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine Hydrochloride Nasal Spray contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 microliters of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine Hydrochloride Nasal Spray also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, sodium chloride, hydrochloric acid and/or sodium hydroxide (to adjust pH), and purified water.</Description>
</NDC>
<NDC>
<NDCCode>63629-8434-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (63629-8434-1) / 240 SPRAY in 1 BOTTLE</PackageDescription>
<NDC11Code>63629-8434-01</NDC11Code>
<ProductNDC>63629-8434</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20170614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202853</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>665</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olopatadine hydrochloride nasal solution (nasal spray) is indicated for the relief of the symptoms of seasonal allergic rhinitis in adults and pediatric patients 6 years of age and older.</IndicationAndUsage>
<Description>Olopatadine hydrochloride nasal solution (nasal spray), 665 mcg is a metered-spray solution for nasal administration. Olopatadine hydrochloride, the active component of olopatadine hydrochloride nasal solution (nasal spray), is a white, water-soluble crystalline powder. The chemical name for olopatadine hydrochloride is (Z)-11-[3-(dimethylamino)propylidene]-6,11-dihydrodibenz[b,e]oxepin-2-acetic acid hydrochloride. It has a molecular weight of 373.88 g/mol, and its molecular formula is C21H23NO3 HCl with the following chemical structure. Olopatadine hydrochloride nasal solution (nasal spray) contains 0.6% w/v olopatadine (base) in a nonsterile aqueous solution with pH of approximately 3.7. After initial priming (5 sprays), each metered spray from the nasal applicator delivers 100 µL of the aqueous solution containing 665 mcg of olopatadine hydrochloride, which is equivalent to 600 mcg of olopatadine (base) [see Dosage Forms and Strengths (3)]. Olopatadine hydrochloride nasal solution (nasal spray) also contains benzalkonium chloride (0.01%), dibasic sodium phosphate, edetate disodium, hydrochloric acid and/or sodium hydroxide (to adjust pH), purified water and sodium chloride.</Description>
</NDC>
</NDCList>