RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>70860-454-01</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70860-454-01)  / 1 mL in 1 VIAL (70860-454-41) </PackageDescription>
    <NDC11Code>70860-0454-01</NDC11Code>
    <ProductNDC>70860-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desmopressin Acetate</ProprietaryName>
    <NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20201130</StartMarketingDate>
    <EndMarketingDate>20241031</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210223</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-05-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20201130</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240430</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desmopressin Acetate Injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. ( 1.1) , 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. ( 1.2) , 3 von Willebrand's disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. ( 1.3) .</IndicationAndUsage>
    <Description>Desmopressin Acetate Injection, USP (desmopressin acetate) is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows. Mol. Wt. 1129.27. Empirical Formula: C 46H 64N 14O 12S 2C 2H 4O 2. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt). Desmopressin Acetate solution for injection is a sterile solution in a 1 mL single-dose vial: Each mL contains 4 mcg of desmopressin acetate which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH. Desmopressin Acetate solution for injection is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-454-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70860-454-10)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70860-0454-10</NDC11Code>
    <ProductNDC>70860-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desmopressin Acetate</ProprietaryName>
    <NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20201130</StartMarketingDate>
    <EndMarketingDate>20241031</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210223</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20201130</StartMarketingDatePackage>
    <EndMarketingDatePackage>20241031</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desmopressin Acetate Injection is a vasopressin analog used for: 1 Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. ( 1.1) , 2 Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. ( 1.2) , 3 von Willebrand's disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. ( 1.3) .</IndicationAndUsage>
    <Description>Desmopressin Acetate Injection, USP (desmopressin acetate) is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows. Mol. Wt. 1129.27. Empirical Formula: C 46H 64N 14O 12S 2C 2H 4O 2. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin monoacetate (salt). Desmopressin Acetate solution for injection is a sterile solution in a 1 mL single-dose vial: Each mL contains 4 mcg of desmopressin acetate which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH. Desmopressin Acetate solution for injection is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-454-31</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (31722-454-31)  / 10 mL in 1 VIAL (31722-454-10) </PackageDescription>
    <NDC11Code>31722-0454-31</NDC11Code>
    <ProductNDC>31722-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Zinc Sulfate</ProprietaryName>
    <NonProprietaryName>Zinc Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219585</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>ZINC SULFATE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Zinc sulfate injection is indicated in adult and pediatric patients as a source of zinc for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
    <Description>Zinc Sulfate Injection, USP is a sterile, non-pyrogenic, clear, colorless, and odorless solution intended for use as a trace element and an additive to intravenous solutions for parenteral nutrition. 10 mg/10 mL Pharmacy Bulk Package vial: Each mL contains 1 mg of zinc present as 2.46 mg of zinc sulfate and water for injection q.s. 30 mg/10 mL Pharmacy Bulk Package vial: Each mL contains 3 mg of zinc present as 7.41 mg of zinc sulfate and water for injection q.s. 25 mg/5 mL Pharmacy Bulk Package vial: Each mL contains 5 mg of zinc present as 12.32 mg of zinc sulfate and water for injection q.s. All presentations do not contain preservatives. The pH range is 2 to 4; pH may be adjusted with sulfuric acid. 1 mg/mL of zinc sulfate injection contains no more than 1,500 mcg/L of aluminum and has a calculated osmolarity of 33 mOsmol/L. 3 mg/mL of zinc sulfate injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 96.5 mOsmol/L. 5 mg/mL of zinc sulfate injection contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 157.2 mOsmol/L. Zinc sulfate heptahydrate USP has a molecular weight of 287.54 g/mol and a formula of ZnSO 4·7H 2O.</Description>
  </NDC>
  <NDC>
    <NDCCode>36800-395-10</NDCCode>
    <PackageDescription>454 g in 1 POUCH (36800-395-10) </PackageDescription>
    <NDC11Code>36800-0395-10</NDC11Code>
    <ProductNDC>36800-395</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Epsom Salt</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate</NonProprietaryName>
    <DosageFormName>GRANULE</DosageFormName>
    <RouteName>ORAL; TOPICAL</RouteName>
    <StartMarketingDate>20140430</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M007</ApplicationNumber>
    <LabelerName>TOP CARE (Topco Associates LLC)</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE, UNSPECIFIED</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140430</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>relieves occasional constipation (irregularity) . generally produces bowel movement in 1/2 to 6 hours.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>42494-454-10</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (42494-454-10) </PackageDescription>
    <NDC11Code>42494-0454-10</NDC11Code>
    <ProductNDC>42494-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naproxen</ProprietaryName>
    <NonProprietaryName>Naproxen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230910</StartMarketingDate>
    <EndMarketingDate>20261130</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091432</ApplicationNumber>
    <LabelerName>Cameron Pharmaceuticals</LabelerName>
    <SubstanceName>NAPROXEN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20230926</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261130</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Naproxen delayed-release tablets are indicated for. The relief of the signs and symptoms of: 1 rheumatoid arthritis, 2 osteoarthritis, 3 ankylosing spondylitis, 4 polyarticular juvenile idiopathic arthritis.</IndicationAndUsage>
    <Description>Naproxen delayed-release tablets are nonsteroidal anti-inflammatory drugs available as follows: Naproxen delayed-release tablets USP are available as enteric coated, white tablets containing 375 mg of naproxen or 500 mg of naproxen, USP for oral administration. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical name for naproxen, USP is (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid. Naproxen, USP has a molecular weight of 230.26 and a molecular formula of C 14H 14O 3. Naproxen has the following structural formula. Naproxen, USP is an odorless, white to off-white crystalline substance. It is lipid-soluble, practically insoluble in water at low pH and freely soluble in water at high pH. The octanol/water partition coefficient of naproxen, USP at pH 7.4 is 1.6 to 1.8. The inactive ingredients are croscarmellose sodium, povidone, colloidal silicon dioxide and magnesium stearate. The enteric coating dispersion contains methacrylic acid copolymer dispersion, talc, titanium dioxide, triethyl citrate and purified water. The dissolution of this enteric-coated naproxen tablet is pH dependent with rapid dissolution above pH 6. There is no dissolution below pH 4.</Description>
  </NDC>
  <NDC>
    <NDCCode>43063-454-10</NDCCode>
    <PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-454-10) </PackageDescription>
    <NDC11Code>43063-0454-10</NDC11Code>
    <ProductNDC>43063-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Chloroquine Phosphate</ProprietaryName>
    <NonProprietaryName>Chloroquine Phosphate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110315</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090249</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CHLOROQUINE PHOSPHATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antimalarial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>43538-531-10</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (43538-531-10)  *  454 g in 1 BOTTLE, PUMP *  100 g in 1 CAN</PackageDescription>
    <NDC11Code>43538-0531-10</NDC11Code>
    <ProductNDC>43538-531</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketodan</ProprietaryName>
    <NonProprietaryName>Ketoconazole</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20120615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091550</ApplicationNumber>
    <LabelerName>Medimetriks Pharmaceuticals, Inc.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2022-12-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>43547-454-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43547-454-10)  / 5 mL in 1 VIAL, SINGLE-DOSE (43547-454-41) </PackageDescription>
    <NDC11Code>43547-0454-10</NDC11Code>
    <ProductNDC>43547-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levetiracetam</ProprietaryName>
    <NonProprietaryName>Levetiracetam</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220411</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209474</ApplicationNumber>
    <LabelerName>Solco Healthcare US, LLC</LabelerName>
    <SubstanceName>LEVETIRACETAM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220411</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1) . Levetiracetam injection is indicated for adjunctive therapy for the treatment of: . oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2) . oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3) . Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible (1.4) .</IndicationAndUsage>
    <Description>Levetiracetam injection is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection, USP contains 100 mg of levetiracetam, USP per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)].</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-454-10</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 CARTON (46708-454-10) </PackageDescription>
    <NDC11Code>46708-0454-10</NDC11Code>
    <ProductNDC>46708-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160520</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201662</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
    <StrengthNumber>12.5; 160</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of &lt;140 mmHg (systolic) and 60% likelihood of achieving &lt;90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
    <Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-454-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-454-10)</PackageDescription>
    <NDC11Code>54575-0454-10</NDC11Code>
    <ProductNDC>54575-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sage Food</ProprietaryName>
    <NonProprietaryName>Sage</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>SAGE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>55111-454-78</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (55111-454-78)  &gt; 10 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (55111-454-79) </PackageDescription>
    <NDC11Code>55111-0454-78</NDC11Code>
    <ProductNDC>55111-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Venlafaxine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Venlafaxine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078421</ApplicationNumber>
    <LabelerName>Dr.Reddy's Laboratories Ltd.</LabelerName>
    <SubstanceName>VENLAFAXINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2018-12-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Venlafaxine hydrochloride extended-release capsules are serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of:.  Major Depressive Disorder (MDD).  Generalized Anxiety Disorder (GAD).  Social Anxiety Disorder (SAD).  Panic Disorder (PD).</IndicationAndUsage>
    <Description>Venlafaxine hydrochloride extended-release capsules USP for once-a-day oral administration contains venlafaxine hydrochloride USP, a serotonin and norepinephrine reuptake inhibitor (SNRI). Venlafaxine is designated (R/S)-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride or (±)-1-[α- [(dimethylamino)methyl]-p-methoxybenzyl] cyclohexanol hydrochloride and has the empirical formula of C17H27NO2 HCl. Its molecular weight is 313.87. The structural formula is shown as follows. Venlafaxine hydrochloride USP is an off-white to white crystalline powder, soluble in methanol. Venlafaxine hydrochloride extended-release capsules USP are formulated as extended-release capsule for once-a-day oral administration. Drug release is controlled by diffusion through the coating membrane on the mini-tablets and is not pH dependent. Capsules contain venlafaxine hydrochloride USP equivalent to 37.5 mg, 75 mg, or 150 mg venlafaxine. Inactive ingredients consist of basic butylated methacrylate copolymer, ethyl cellulose, gelatin, medium chain triglycerides, microcrystalline cellulose, povidone, red iron oxide, sodium stearyl fumarate, talc and titanium dioxide. In addition to the above 37.5 mg consists of black iron oxide and yellow iron oxide. The components of the black imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 37.5 mg and 75 mg are black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution The components of the white imprinting ink used in the venlafaxine hydrochloride extended-release capsules USP, 150 mg are ammonium hydroxide, propylene glycol, simethicone, shellac and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>55363-454-02</NDCCode>
    <PackageDescription>10 kg in 1 DRUM (55363-454-02) </PackageDescription>
    <NDC11Code>55363-0454-02</NDC11Code>
    <ProductNDC>55363-454</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Cholestyramine Resin</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20120901</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>ION EXCHANGE INDIA LIMITED</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-10-18</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>01-SEP-12</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>55700-454-10</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE (55700-454-10) </PackageDescription>
    <NDC11Code>55700-0454-10</NDC11Code>
    <ProductNDC>55700-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levofloxacin</ProprietaryName>
    <NonProprietaryName>Levofloxacin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076890</ApplicationNumber>
    <LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
    <SubstanceName>LEVOFLOXACIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-07-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>57896-454-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (57896-454-10) </PackageDescription>
    <NDC11Code>57896-0454-10</NDC11Code>
    <ProductNDC>57896-454</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Geri-kot</ProprietaryName>
    <NonProprietaryName>Standardized Senna Concentrate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180401</StartMarketingDate>
    <EndMarketingDate>20260831</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>505G(a)(3)</ApplicationNumber>
    <LabelerName>Geri-Care Pharmaceutical Corp</LabelerName>
    <SubstanceName>SENNOSIDES</SubstanceName>
    <StrengthNumber>8.6</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20180401</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260831</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>relieves occasional constipation (irregularity).</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>58411-454-10</NDCCode>
    <PackageDescription>1 CONTAINER in 1 CARTON (58411-454-10)  / 125 mL in 1 CONTAINER</PackageDescription>
    <NDC11Code>58411-0454-10</NDC11Code>
    <ProductNDC>58411-454</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cle De Peau Beaute Protective Fortifying N</ProprietaryName>
    <NonProprietaryName>Avobenzone, Octinoxate, Octocrylene, And Oxybenzone</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190201</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M020</ApplicationNumber>
    <LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
    <SubstanceName>AVOBENZONE; OCTINOXATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
    <StrengthNumber>3200; 9472; 2560; 1280</StrengthNumber>
    <StrengthUnit>mg/125mL; mg/125mL; mg/125mL; mg/125mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>59011-454-10</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (59011-454-10)</PackageDescription>
    <NDC11Code>59011-0454-10</NDC11Code>
    <ProductNDC>59011-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dilaudid</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19560101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019892</ApplicationNumber>
    <LabelerName>Purdue Pharma LP</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-05-01</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63739-454-10</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-454-10)  &gt; 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>63739-0454-10</NDC11Code>
    <ProductNDC>63739-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metoprolol Succinate</ProprietaryName>
    <NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100415</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077298</ApplicationNumber>
    <LabelerName>McKesson Corporation dba SKY Packaging</LabelerName>
    <SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-11-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100415</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65084-454-10</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (65084-454-10) </PackageDescription>
    <NDC11Code>65084-0454-10</NDC11Code>
    <ProductNDC>65084-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fioricet</ProprietaryName>
    <NonProprietaryName>Butalbital, Acetaminophen, And Caffeine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130729</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040885</ApplicationNumber>
    <LabelerName>McKesson Corporation dba RX Pak</LabelerName>
    <SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE</SubstanceName>
    <StrengthNumber>50; 300; 40</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Barbiturates [CS],Barbiturate [EPC],Central Nervous System Stimulant [EPC],Methylxanthine [EPC],Xanthines [CS],Central Nervous System Stimulation [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>67877-454-84</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (67877-454-84)  / 10 CAPSULE, COATED PELLETS in 1 BLISTER PACK (67877-454-33) </PackageDescription>
    <NDC11Code>67877-0454-84</NDC11Code>
    <ProductNDC>67877-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Itraconazole</ProprietaryName>
    <NonProprietaryName>Itraconazole</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED PELLETS</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170612</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208591</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>ITRACONAZOLE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Itraconazole capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients. 1. Blastomycosis, pulmonary and extrapulmonary. 2. Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal. histoplasmosis, and. 3. Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are. refractory to amphotericin B therapy. Specimens for fungal cultures and other relevant laboratory studies (wet mount, histopathology, serology) should be obtained before therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, antiinfective therapy should be adjusted accordingly. Itraconazole capsules are also indicated for the treatment of the following fungal infections in non-immunocompromised. patients. 1. Onychomycosis of the toenail, with or without fingernail involvement, due to dermatophytes (tinea unguium), and. 2. Onychomycosis of the fingernail due to dermatophytes (tinea unguium). Prior to initiating treatment, appropriate nail specimens for laboratory testing (KOH preparation, fungal culture, or nail biopsy) should be obtained to confirm the diagnosis of onychomycosis. (See CLINICAL PHARMACOLOGY: Special Populations, CONTRAINDICATIONS, WARNINGS, and ADVERSE REACTIONS: Postmarketing Experience for more information.). Description of Clinical Studies. Blastomycosis:. Analyses were conducted on data from two open-label, non-concurrently controlled studies (N=73 combined) in patients with normal or abnormal immune status. The median dose was 200 mg/day. A response for most signs and symptoms was observed within the first 2 weeks, and all signs and symptoms cleared between 3 and 6 months. Results of these two studies demonstrated substantial evidence of the effectiveness of itraconazole for the treatment of blastomycosis compared with the natural history of untreated cases. Histoplasmosis. Analyses were conducted on data from two open-label, non-concurrently controlled studies (N=34 combined) in patients with normal or abnormal immune status (not including HIV-infected patients). The median dose was 200 mg/day. A response for most signs and symptoms was observed within the first 2 weeks, and all signs and symptoms cleared between 3 and 12 months. Results of these two studies demonstrated substantial evidence of the effectiveness of itraconazole for the treatment of histoplasmosis, compared with the natural history of untreated cases. Histoplasmosis in HIV-infected patients.  Data from a small number of HIV-infected patients suggested that the response rate of histoplasmosis in HIV-infected patients is similar to that of non-HIV-infected patients. The clinical course of histoplasmosis in HIV-infected patients is more severe and usually requires maintenance therapy to prevent relapse. Aspergillosis. Analyses were conducted on data from an open-label, "single-patient-use" protocol designed to make itraconazole available in the U.S. for patients who either failed or were intolerant of amphotericin B therapy (N=190). The findings were corroborated by two smaller open-label studies (N=31 combined) in the same patient population. Most adult patients were treated with a daily dose of 200 to 400 mg, with a median duration of 3 months. Results of these studies demonstrated substantial evidence of  effectiveness of itraconazole as a second-line therapy for the treatment of aspergillosis compared with the natural history of the disease in patients who either failed or were intolerant of amphotericin B therapy. Onychomycosis of the toenail. Analyses were conducted on data from three double-blind, placebo-controlled studies (N=214 total; 110 given itraconazole capsules) in which patients with onychomycosis of the toenails received 200 mg of itraconazole capsules once daily for 12 consecutive weeks. Results of these studies demonstrated mycologic cure, defined as simultaneous occurrence of negative KOH plus negative culture, in 54% of patients. Thirty-five percent (35%) of patients were considered an overall success (mycologic cure plus clear or minimal nail involvement with significantly decreased signs) and 14% of patients demonstrated mycologic cure plus clinical cure (clearance of all signs, with or without residual nail deformity). The mean time to overall success was approximately 10 months. Twenty-one percent (21%) of the overall success group had a relapse (worsening of the global score or conversion of KOH or culture from negative to positive). Onychomycosis of the fingernail. Analyses were conducted on data from a double-blind, placebo-controlled study (N=73 total; 37 given itraconazole capsules) in which patients with onychomycosis of the fingernails received a 1-week course of 200 mg of itraconazole capsules b.i.d., followed by a 3-week period without itraconazole, which was followed by a second 1-week course of 200 mg of itraconazole capsules b.i.d. Results demonstrated mycologic cure in 61% of patients. Fifty-six percent (56%) of patients were considered an overall success and 47% of patients demonstrated mycologic cure plus clinical cure. The mean time to overall success was approximately 5 months. None of the patients who achieved overall success relapsed.</IndicationAndUsage>
    <Description>Itraconazole, an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2 -1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2 -1,2,4-triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]- Δ2 -1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white or almost white powder. Freely soluble in methylene chloride, sparingly soluble in tetrahydrofuran, very slightly soluble in alcohol and practically insoluble in water. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole capsules contain 100 mg of itraconazole coated on sugar spheres (composed of sucrose, maize starch and purified water). Inactive ingredients are hard gelatin capsule, hypromellose, poloxamer 188, ethanol absolute, methylene chloride, polyethylene glycol 20000, talc, colloidal silicon dioxide, SLS, titanium dioxide, FD&amp;C blue 1, FD&amp;C red 40, FD&amp;C red 3 and white ink (containing: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, titanium dioxide and potassium hydroxide). FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>71919-454-10</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-454-10) </PackageDescription>
    <NDC11Code>71919-0454-10</NDC11Code>
    <ProductNDC>71919-454</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Mercurius Cyanatus</ProprietaryName>
    <NonProprietaryName>Mercuric Cyanide</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120125</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>MERCURIC CYANIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-03-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>72603-454-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (72603-454-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (72603-454-01) </PackageDescription>
    <NDC11Code>72603-0454-10</NDC11Code>
    <ProductNDC>72603-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20240301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062797</ApplicationNumber>
    <LabelerName>NorthStar Rx, LLC</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-03-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl) amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure. The molecular formula is C 16H 18N 3NaO 4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-100-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70860-100-10)  / 5 mL in 1 VIAL, SINGLE-DOSE (70860-100-41) </PackageDescription>
    <NDC11Code>70860-0100-10</NDC11Code>
    <ProductNDC>70860-100</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Azithromycin</ProprietaryName>
    <NonProprietaryName>Azithromycin Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170101</StartMarketingDate>
    <EndMarketingDate>20270331</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065501</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20170101</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270331</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Azithromycin for injection is a macrolide antibacterial drug indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
    <Description>Azithromycin for Injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-hepta-methyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D- xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the monohydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12· H 2O and a molecular weight of 767.0. Azithromycin for Injection, USP consists of azithromycin monohydrate and the following inactive ingredients: citric acid and sodium hydroxide. Azithromycin for Injection, USP is supplied in lyophilized form in a 10 mL single-dose vial equivalent to 500 mg of azithromycin for intravenous administration. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate equivalent to 100 mg of azithromycin.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-103-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70860-103-10)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70860-103-41) </PackageDescription>
    <NDC11Code>70860-0103-10</NDC11Code>
    <ProductNDC>70860-103</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Polymyxin B</ProprietaryName>
    <NonProprietaryName>Polymyxin B Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
    <StartMarketingDate>20170101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207322</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
    <StrengthNumber>500000</StrengthNumber>
    <StrengthUnit>[iU]/1</StrengthUnit>
    <Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H. influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of polymyxin B and other antibacterial drugs, polymyxin B should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Polymyxin B for Injection, USP is one of a group of basic polypeptide antibiotics derived from B. polymyxa (B. aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B 1and B 2, which are produced by the growth of Bacillus polymyxa(Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection, USP is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-104-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70860-104-10)  &gt; 10 mL in 1 VIAL (70860-104-41) </PackageDescription>
    <NDC11Code>70860-0104-10</NDC11Code>
    <ProductNDC>70860-104</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205694</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-105-20</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70860-105-20)  &gt; 20 mL in 1 VIAL (70860-105-41) </PackageDescription>
    <NDC11Code>70860-0105-20</NDC11Code>
    <ProductNDC>70860-105</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205694</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
    <Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-106-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70860-106-10)  / 10.8 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70860-0106-10</NDC11Code>
    <ProductNDC>70860-106</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Caspofungin Acetate</ProprietaryName>
    <NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171004</StartMarketingDate>
    <EndMarketingDate>20240731</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207092</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/10.8mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20171004</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240731</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. ( 1) , 2 Treatment of candidemia and the following Candidainfections: intra-abdominal abscesses, peritonitis and pleural space infections. ( 1) , 3 Treatment of esophageal candidiasis. ( 1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. ( 1) .</IndicationAndUsage>
    <Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis.Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4 R,5 S)-5-[(2-aminoethyl)amino]- N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3 R)-3-hydroxy-L-ornithine] pneumocandin B 0diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C 52H 88N 10O 152C 2H 4O 2and the formula weight is 1213.42. The structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-107-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70860-107-10)  &gt; 10.8 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70860-0107-10</NDC11Code>
    <ProductNDC>70860-107</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Caspofungin Acetate</ProprietaryName>
    <NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171004</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207092</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
    <StrengthNumber>70</StrengthNumber>
    <StrengthUnit>mg/10.8mL</StrengthUnit>
    <Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171004</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .</IndicationAndUsage>
    <Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-112-15</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70860-112-15)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-112-41) </PackageDescription>
    <NDC11Code>70860-0112-15</NDC11Code>
    <ProductNDC>70860-112</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090354</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-113-15</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70860-113-15)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-113-41) </PackageDescription>
    <NDC11Code>70860-0113-15</NDC11Code>
    <ProductNDC>70860-113</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090354</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
  <NDC>
    <NDCCode>70860-114-15</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (70860-114-15)  &gt; 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-114-41) </PackageDescription>
    <NDC11Code>70860-0114-15</NDC11Code>
    <ProductNDC>70860-114</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ampicillin</ProprietaryName>
    <NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090354</ApplicationNumber>
    <LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
    <SubstanceName>AMPICILLIN SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
    <Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
  </NDC>
</NDCList>