{
"NDC": [
{
"NDCCode": "70860-752-04",
"PackageDescription": "10 VIAL in 1 CARTON (70860-752-04) / 4 mL in 1 VIAL (70860-752-41) ",
"NDC11Code": "70860-0752-04",
"ProductNDC": "70860-752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075651",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200810",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: : 1 Short term treatment of active duodenal ulcer.Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks. , 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer.Controlled studies in adults have not extended beyond one year. , 3 Short term treatment of active benign gastric ulcer.Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks. , 4 Short term treatment of gastroesophageal reflux disease (GERD).Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). , 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas)(see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). .",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H 2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio] propylidene] sulfamide. Its structural formula is:. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol. Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single-dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg, and Water for Injection q.s. 1 mL. The multi-dose solution also contains benzyl alcohol 0.9% added as preservative."
},
{
"NDCCode": "70860-302-04",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (70860-302-04) / 4 mL in 1 VIAL, SINGLE-DOSE (70860-302-42) ",
"NDC11Code": "70860-0302-04",
"ProductNDC": "70860-302",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210315",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214766",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210315",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro- N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg/mL is a sterile, non-pyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3."
},
{
"NDCCode": "70860-405-04",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70860-405-04) / 4 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "70860-0405-04",
"ProductNDC": "70860-405",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220208",
"EndMarketingDate": "20260131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074441",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220208",
"EndMarketingDatePackage": "20260131",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg per mL), for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 to 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C 17H 20N 2O 5S Molecular weight: 364.42."
},
{
"NDCCode": "70860-701-04",
"PackageDescription": "25 VIAL in 1 CARTON (70860-701-04) / 2 mL in 1 VIAL (70860-701-42) ",
"NDC11Code": "70860-0701-04",
"ProductNDC": "70860-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20170115",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204216",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20171106",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).",
"Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color."
},
{
"NDCCode": "49348-752-04",
"PackageDescription": "2 BLISTER PACK in 1 BOX (49348-752-04) > 12 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "49348-0752-04",
"ProductNDC": "49348-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti-diarrheal",
"ProprietaryNameSuffix": "Loperamide Hcl",
"NonProprietaryName": "Loperamide Hydrochloride",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20060801",
"EndMarketingDate": "20211230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021855",
"LabelerName": "Strategic Sourcing Services LLC",
"SubstanceName": "LOPERAMIDE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20060801",
"EndMarketingDatePackage": "20211230",
"SamplePackage": "N"
},
{
"NDCCode": "54766-752-04",
"PackageDescription": "1 KIT in 1 CARTON (54766-752-04) * 28.4 g in 1 TUBE, WITH APPLICATOR (54766-755-04) * 6 g in 1 POUCH (0496-0749-76)",
"NDC11Code": "54766-0752-04",
"ProductNDC": "54766-752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Analpram E Cream 2.5% Kit",
"ProprietaryNameSuffix": "Hydrocortisone Acetate 2.5% Pramoxine Hydrochloride 1%",
"NonProprietaryName": "Hydrocortisone Acetate And Pramoxine Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Sebela Pharmaceuticals Inc.",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "59011-752-04",
"PackageDescription": "4 POUCH in 1 CARTON (59011-752-04) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH",
"NDC11Code": "59011-0752-04",
"ProductNDC": "59011-752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butrans",
"NonProprietaryName": "Buprenorphine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20110214",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021306",
"LabelerName": "Knoa Pharma LLC",
"SubstanceName": "BUPRENORPHINE",
"StrengthNumber": "20",
"StrengthUnit": "ug/h",
"Pharm_Classes": "Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110214",
"SamplePackage": "N",
"IndicationAndUsage": "BUTRANS is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including BUTRANS, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 BUTRANS is not indicated as an as-needed (prn) analgesic.",
"Description": "BUTRANS is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of BUTRANS are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. BUTRANS is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of BUTRANS (not to scale). The active ingredient in BUTRANS is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum."
},
{
"NDCCode": "63545-752-04",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (63545-752-04) ",
"NDC11Code": "63545-0752-04",
"ProductNDC": "63545-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Adamas",
"NonProprietaryName": "Adamas",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191220",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "DIAMOND",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20191220",
"SamplePackage": "N"
},
{
"NDCCode": "65601-752-04",
"PackageDescription": "3780 mL in 1 JUG (65601-752-04)",
"NDC11Code": "65601-0752-04",
"ProductNDC": "65601-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Winning Hands Alcohol Free",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121112",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Betco Corporation, Ltd.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "72288-752-04",
"PackageDescription": "3870 mL in 1 JUG (72288-752-04) ",
"NDC11Code": "72288-0752-04",
"ProductNDC": "72288-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Amazon Commercial Alcohol Free Foam Hand Sanitizer",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Amazon.com Services",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20151001",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: 1 Use in a variety of public facilities., 2 Use this product when soap and water are not available."
},
{
"NDCCode": "73926-752-04",
"PackageDescription": "100 POUCH in 1 PACKAGE (73926-752-04) / 2 mL in 1 POUCH",
"NDC11Code": "73926-0752-04",
"ProductNDC": "73926-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sterno Performance Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200801",
"EndMarketingDate": "20231231",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "STERNO PRODUCTS, LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200801",
"EndMarketingDatePackage": "20231231",
"SamplePackage": "N"
},
{
"NDCCode": "42291-752-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (42291-752-01) ",
"NDC11Code": "42291-0752-01",
"ProductNDC": "42291-752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tacrolimus",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200319",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206651",
"LabelerName": "AvKARE",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200319",
"SamplePackage": "N"
},
{
"NDCCode": "43269-752-16",
"PackageDescription": "500 mL in 1 BOTTLE, PUMP (43269-752-16)",
"NDC11Code": "43269-0752-16",
"ProductNDC": "43269-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Golden Pear Antibacterial Foaming Hand Wash",
"NonProprietaryName": "Triclosan",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120217",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "SJ Creations, Inc.",
"SubstanceName": "TRICLOSAN",
"StrengthNumber": ".2",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-04-02",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55319-752-21",
"PackageDescription": "89 g in 1 BOTTLE, PLASTIC (55319-752-21) ",
"NDC11Code": "55319-0752-21",
"ProductNDC": "55319-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunscreen",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170807",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Family Dollar Services, Inc",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30.9; 133.9; 51.5; 72.1; 41.2",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170807",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "55319-752-34",
"PackageDescription": "236 g in 1 BOTTLE, PLASTIC (55319-752-34) ",
"NDC11Code": "55319-0752-34",
"ProductNDC": "55319-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunscreen",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170807",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Family Dollar Services, Inc",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30.9; 133.9; 51.5; 72.1; 41.2",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170807",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "59088-752-00",
"PackageDescription": "1 KIT in 1 KIT (59088-752-00) * 1 TUBE in 1 CARTON (52565-022-85) > 85 g in 1 TUBE",
"NDC11Code": "59088-0752-00",
"ProductNDC": "59088-752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolpak",
"NonProprietaryName": "Econazole Nitrate",
"DosageFormName": "KIT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200324",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "PureTek Corporation",
"Status": "Deprecated",
"LastUpdate": "2023-04-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20200324",
"SamplePackage": "N"
},
{
"NDCCode": "59779-752-28",
"PackageDescription": "1 TUBE in 1 BOX (59779-752-28) > 1 g in 1 TUBE",
"NDC11Code": "59779-0752-28",
"ProductNDC": "59779-752",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cvs Hemorrhoidal",
"NonProprietaryName": "Glycerin Phenylephrine Hci Pramoxine Hci White Petrolatum",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140117",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part346",
"LabelerName": "CVS Pharmacy, Inc.",
"SubstanceName": "GLYCERIN; PHENYLEPHRINE HYDROCHLORIDE; PRAMOXINE HYDROCHLORIDE; PETROLATUM",
"StrengthNumber": "14.4; .25; 1; 15",
"StrengthUnit": "g/100g; g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20160912",
"SamplePackage": "N",
"IndicationAndUsage": "Directions: 1 Adults: when practical, cleanse the affected area by patting or blottign with an appropriate cleansing wipe. Gently dry by patting or blotting with a tissue or a soft cloth before applying., 2 When first opening the tube, puncture foil seal with top end of cap, 3 Apply externally or in the lower portion of the anal canal only, 4 Apply to the affected area up to 4 times daily, especially at night, in the morning or after each bowel movement, 5 For application in the lower anal canal: remove cover from dispensing cap. Attach dispensing cap to tube, lubricate dispensing cap well, then gently insert dispensing cap partway into the anus., 6 Thoroughly cleanse dispensing cap after each use and replace cover., 7 Children under 12 years of age: ask a doctor."
},
{
"NDCCode": "62157-752-01",
"PackageDescription": "20 kg in 1 DRUM (62157-752-01)",
"NDC11Code": "62157-0752-01",
"ProductNDC": "62157-752",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Medroxyprogesterone Acetate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20181215",
"MarketingCategoryName": "BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING",
"LabelerName": "AX Pharmaceutical Corp",
"SubstanceName": "MEDROXYPROGESTERONE ACETATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "62935-752-75",
"PackageDescription": "1 KIT in 1 CARTON (62935-752-75) * .25 mL in 1 SYRINGE (62935-751-74) * .25 mL in 1 SYRINGE (62935-750-75) ",
"NDC11Code": "62935-0752-75",
"ProductNDC": "62935-752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eligard",
"NonProprietaryName": "Leuprolide Acetate",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20020515",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021343",
"LabelerName": "TOLMAR PHARMACEUTICALS INC.",
"Status": "Deprecated",
"LastUpdate": "2019-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20020515",
"SamplePackage": "N"
},
{
"NDCCode": "65015-752-61",
"PackageDescription": "100 kg in 1 DRUM (65015-752-61)",
"NDC11Code": "65015-0752-61",
"ProductNDC": "65015-752",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150128",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "MYLAN LABORATORIES LIMITED",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "68094-752-62",
"PackageDescription": "3 TRAY in 1 CASE (68094-752-62) > 10 CUP, UNIT-DOSE in 1 TRAY > 5 mL in 1 CUP, UNIT-DOSE (68094-752-59) ",
"NDC11Code": "68094-0752-62",
"ProductNDC": "68094-752",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Digoxin",
"NonProprietaryName": "Digoxin",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20120504",
"EndMarketingDate": "20190531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021648",
"LabelerName": "Precision Dose Inc.",
"SubstanceName": "DIGOXIN",
"StrengthNumber": ".05",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cardiac Glycoside [EPC],Cardiac Glycosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120504",
"EndMarketingDatePackage": "20190531",
"SamplePackage": "N"
},
{
"NDCCode": "70860-100-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (70860-100-10) / 5 mL in 1 VIAL, SINGLE-DOSE (70860-100-41) ",
"NDC11Code": "70860-0100-10",
"ProductNDC": "70860-100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin Monohydrate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170101",
"EndMarketingDate": "20270331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065501",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "AZITHROMYCIN MONOHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2025-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170101",
"EndMarketingDatePackage": "20270331",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin for injection is a macrolide antibacterial drug indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Azithromycin for Injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-hepta-methyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D- xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the monohydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12· H 2O and a molecular weight of 767.0. Azithromycin for Injection, USP consists of azithromycin monohydrate and the following inactive ingredients: citric acid and sodium hydroxide. Azithromycin for Injection, USP is supplied in lyophilized form in a 10 mL single-dose vial equivalent to 500 mg of azithromycin for intravenous administration. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate equivalent to 100 mg of azithromycin."
},
{
"NDCCode": "70860-103-10",
"PackageDescription": "10 VIAL in 1 CARTON (70860-103-10) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70860-103-41) ",
"NDC11Code": "70860-0103-10",
"ProductNDC": "70860-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B Sulfate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "20170101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207322",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[iU]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170101",
"SamplePackage": "N",
"IndicationAndUsage": "Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H. influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of polymyxin B and other antibacterial drugs, polymyxin B should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Polymyxin B for Injection, USP is one of a group of basic polypeptide antibiotics derived from B. polymyxa (B. aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B 1and B 2, which are produced by the growth of Bacillus polymyxa(Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection, USP is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable."
},
{
"NDCCode": "70860-104-10",
"PackageDescription": "10 VIAL in 1 CARTON (70860-104-10) > 10 mL in 1 VIAL (70860-104-41) ",
"NDC11Code": "70860-0104-10",
"ProductNDC": "70860-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205694",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170915",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "70860-105-20",
"PackageDescription": "10 VIAL in 1 CARTON (70860-105-20) > 20 mL in 1 VIAL (70860-105-41) ",
"NDC11Code": "70860-0105-20",
"ProductNDC": "70860-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205694",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20170915",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "70860-106-10",
"PackageDescription": "1 VIAL in 1 CARTON (70860-106-10) / 10.8 mL in 1 VIAL",
"NDC11Code": "70860-0106-10",
"ProductNDC": "70860-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caspofungin Acetate",
"NonProprietaryName": "Caspofungin Acetate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171004",
"EndMarketingDate": "20240731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207092",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "CASPOFUNGIN ACETATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/10.8mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20171004",
"EndMarketingDatePackage": "20240731",
"SamplePackage": "N",
"IndicationAndUsage": "Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. ( 1) , 2 Treatment of candidemia and the following Candidainfections: intra-abdominal abscesses, peritonitis and pleural space infections. ( 1) , 3 Treatment of esophageal candidiasis. ( 1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. ( 1) .",
"Description": "Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis.Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4 R,5 S)-5-[(2-aminoethyl)amino]- N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3 R)-3-hydroxy-L-ornithine] pneumocandin B 0diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C 52H 88N 10O 152C 2H 4O 2and the formula weight is 1213.42. The structural formula is:."
},
{
"NDCCode": "70860-107-10",
"PackageDescription": "1 VIAL in 1 CARTON (70860-107-10) > 10.8 mL in 1 VIAL",
"NDC11Code": "70860-0107-10",
"ProductNDC": "70860-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caspofungin Acetate",
"NonProprietaryName": "Caspofungin Acetate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207092",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "CASPOFUNGIN ACETATE",
"StrengthNumber": "70",
"StrengthUnit": "mg/10.8mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20171004",
"SamplePackage": "N",
"IndicationAndUsage": "Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .",
"Description": "Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:."
},
{
"NDCCode": "70860-112-15",
"PackageDescription": "10 VIAL in 1 CARTON (70860-112-15) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-112-41) ",
"NDC11Code": "70860-0112-15",
"ProductNDC": "70860-112",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "70860-113-15",
"PackageDescription": "10 VIAL in 1 CARTON (70860-113-15) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-113-41) ",
"NDC11Code": "70860-0113-15",
"ProductNDC": "70860-113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
},
{
"NDCCode": "70860-114-15",
"PackageDescription": "10 VIAL in 1 CARTON (70860-114-15) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-114-41) ",
"NDC11Code": "70860-0114-15",
"ProductNDC": "70860-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090354",
"LabelerName": "Athenex Pharmaceutical Division, LLC.",
"SubstanceName": "AMPICILLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180801",
"SamplePackage": "N",
"IndicationAndUsage": "Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.",
"Description": "Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70860-752-04</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70860-752-04) / 4 mL in 1 VIAL (70860-752-41) </PackageDescription>
<NDC11Code>70860-0752-04</NDC11Code>
<ProductNDC>70860-752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075651</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: : 1 Short term treatment of active duodenal ulcer.Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks. , 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer.Controlled studies in adults have not extended beyond one year. , 3 Short term treatment of active benign gastric ulcer.Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks. , 4 Short term treatment of gastroesophageal reflux disease (GERD).Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). , 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas)(see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). .</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H 2-receptor antagonist. Famotidine is [1-Amino-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl]thio] propylidene] sulfamide. Its structural formula is:. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol. Famotidine Injection is supplied as a sterile concentrated solution for intravenous injection. Each mL of the single-dose solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg, and Water for Injection q.s. 1 mL. The multi-dose solution also contains benzyl alcohol 0.9% added as preservative.</Description>
</NDC>
<NDC>
<NDCCode>70860-302-04</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (70860-302-04) / 4 mL in 1 VIAL, SINGLE-DOSE (70860-302-42) </PackageDescription>
<NDC11Code>70860-0302-04</NDC11Code>
<ProductNDC>70860-302</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210315</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214766</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210315</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro- N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection, USP 10 mg/mL is a sterile, non-pyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each mL contains: Furosemide 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
</NDC>
<NDC>
<NDCCode>70860-405-04</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70860-405-04) / 4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>70860-0405-04</NDC11Code>
<ProductNDC>70860-405</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220208</StartMarketingDate>
<EndMarketingDate>20260131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074441</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220208</StartMarketingDatePackage>
<EndMarketingDatePackage>20260131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg per mL), for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 to 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C 17H 20N 2O 5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>70860-701-04</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (70860-701-04) / 2 mL in 1 VIAL (70860-701-42) </PackageDescription>
<NDC11Code>70860-0701-04</NDC11Code>
<ProductNDC>70860-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20170115</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204216</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20171106</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).</IndicationAndUsage>
<Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1 H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg and 8.70 mg respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear to slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>49348-752-04</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 BOX (49348-752-04) > 12 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49348-0752-04</NDC11Code>
<ProductNDC>49348-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti-diarrheal</ProprietaryName>
<ProprietaryNameSuffix>Loperamide Hcl</ProprietaryNameSuffix>
<NonProprietaryName>Loperamide Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060801</StartMarketingDate>
<EndMarketingDate>20211230</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021855</ApplicationNumber>
<LabelerName>Strategic Sourcing Services LLC</LabelerName>
<SubstanceName>LOPERAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20060801</StartMarketingDatePackage>
<EndMarketingDatePackage>20211230</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>54766-752-04</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (54766-752-04) * 28.4 g in 1 TUBE, WITH APPLICATOR (54766-755-04) * 6 g in 1 POUCH (0496-0749-76)</PackageDescription>
<NDC11Code>54766-0752-04</NDC11Code>
<ProductNDC>54766-752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Analpram E Cream 2.5% Kit</ProprietaryName>
<ProprietaryNameSuffix>Hydrocortisone Acetate 2.5% Pramoxine Hydrochloride 1%</ProprietaryNameSuffix>
<NonProprietaryName>Hydrocortisone Acetate And Pramoxine Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Sebela Pharmaceuticals Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>59011-752-04</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (59011-752-04) / 1 PATCH in 1 POUCH / 168 h in 1 PATCH</PackageDescription>
<NDC11Code>59011-0752-04</NDC11Code>
<ProductNDC>59011-752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butrans</ProprietaryName>
<NonProprietaryName>Buprenorphine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20110214</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021306</ApplicationNumber>
<LabelerName>Knoa Pharma LLC</LabelerName>
<SubstanceName>BUPRENORPHINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/h</StrengthUnit>
<Pharm_Classes>Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BUTRANS is indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including BUTRANS, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 BUTRANS is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>BUTRANS is a transdermal system providing systemic delivery of buprenorphine, a mu opioid partial agonist analgesic, continuously for 7 days. The chemical name of buprenorphine is 6,14-ethenomorphinan-7-methanol, 17-(cyclopropylmethyl)- α-(1,1-dimethylethyl)-4, 5-epoxy-18, 19-dihydro-3-hydroxy-6-methoxy-α-methyl-, [5α, 7α, (S)]. The structural formula is. The molecular weight of buprenorphine is 467.6; the empirical formula is C29H41NO4. Buprenorphine occurs as a white or almost white powder and is very slightly soluble in water, freely soluble in acetone, soluble in methanol and ether, and slightly soluble in cyclohexane. The pKa is 8.5 and the melting point is about 217°C. System Components and Structure. Five different strengths of BUTRANS are available: 5, 7.5, 10, 15, and 20 mcg/hour (Table 6). The proportion of buprenorphine mixed in the adhesive matrix is the same in each of the five strengths. The amount of buprenorphine released from each system per hour is proportional to the active surface area of the system. The skin is the limiting barrier to diffusion from the system into the bloodstream. BUTRANS is a rectangular or square, beige-colored system consisting of a protective liner and functional layers. Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a beige-colored web backing layer; (2) an adhesive rim without buprenorphine; (3) a separating layer over the buprenorphine-containing adhesive matrix; (4) the buprenorphine-containing adhesive matrix; and (5) a peel-off release liner. Before use, the release liner covering the adhesive layer is removed and discarded. Figure 1: Cross-Section Diagram of BUTRANS (not to scale). The active ingredient in BUTRANS is buprenorphine. The inactive ingredients in each system are: levulinic acid, oleyl oleate, povidone, and polyacrylate cross-linked with aluminum.</Description>
</NDC>
<NDC>
<NDCCode>63545-752-04</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (63545-752-04) </PackageDescription>
<NDC11Code>63545-0752-04</NDC11Code>
<ProductNDC>63545-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Adamas</ProprietaryName>
<NonProprietaryName>Adamas</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191220</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>DIAMOND</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65601-752-04</NDCCode>
<PackageDescription>3780 mL in 1 JUG (65601-752-04)</PackageDescription>
<NDC11Code>65601-0752-04</NDC11Code>
<ProductNDC>65601-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Winning Hands Alcohol Free</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121112</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Betco Corporation, Ltd.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>72288-752-04</NDCCode>
<PackageDescription>3870 mL in 1 JUG (72288-752-04) </PackageDescription>
<NDC11Code>72288-0752-04</NDC11Code>
<ProductNDC>72288-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Amazon Commercial Alcohol Free Foam Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Amazon.com Services</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: 1 Use in a variety of public facilities., 2 Use this product when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>73926-752-04</NDCCode>
<PackageDescription>100 POUCH in 1 PACKAGE (73926-752-04) / 2 mL in 1 POUCH</PackageDescription>
<NDC11Code>73926-0752-04</NDC11Code>
<ProductNDC>73926-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sterno Performance Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200801</StartMarketingDate>
<EndMarketingDate>20231231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>STERNO PRODUCTS, LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200801</StartMarketingDatePackage>
<EndMarketingDatePackage>20231231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42291-752-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (42291-752-01) </PackageDescription>
<NDC11Code>42291-0752-01</NDC11Code>
<ProductNDC>42291-752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tacrolimus</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200319</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206651</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43269-752-16</NDCCode>
<PackageDescription>500 mL in 1 BOTTLE, PUMP (43269-752-16)</PackageDescription>
<NDC11Code>43269-0752-16</NDC11Code>
<ProductNDC>43269-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Golden Pear Antibacterial Foaming Hand Wash</ProprietaryName>
<NonProprietaryName>Triclosan</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120217</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>SJ Creations, Inc.</LabelerName>
<SubstanceName>TRICLOSAN</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-04-02</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55319-752-21</NDCCode>
<PackageDescription>89 g in 1 BOTTLE, PLASTIC (55319-752-21) </PackageDescription>
<NDC11Code>55319-0752-21</NDC11Code>
<ProductNDC>55319-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170807</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Family Dollar Services, Inc</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30.9; 133.9; 51.5; 72.1; 41.2</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>55319-752-34</NDCCode>
<PackageDescription>236 g in 1 BOTTLE, PLASTIC (55319-752-34) </PackageDescription>
<NDC11Code>55319-0752-34</NDC11Code>
<ProductNDC>55319-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170807</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Family Dollar Services, Inc</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30.9; 133.9; 51.5; 72.1; 41.2</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170807</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59088-752-00</NDCCode>
<PackageDescription>1 KIT in 1 KIT (59088-752-00) * 1 TUBE in 1 CARTON (52565-022-85) > 85 g in 1 TUBE</PackageDescription>
<NDC11Code>59088-0752-00</NDC11Code>
<ProductNDC>59088-752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolpak</ProprietaryName>
<NonProprietaryName>Econazole Nitrate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200324</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>PureTek Corporation</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2023-04-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59779-752-28</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (59779-752-28) > 1 g in 1 TUBE</PackageDescription>
<NDC11Code>59779-0752-28</NDC11Code>
<ProductNDC>59779-752</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cvs Hemorrhoidal</ProprietaryName>
<NonProprietaryName>Glycerin Phenylephrine Hci Pramoxine Hci White Petrolatum</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140117</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part346</ApplicationNumber>
<LabelerName>CVS Pharmacy, Inc.</LabelerName>
<SubstanceName>GLYCERIN; PHENYLEPHRINE HYDROCHLORIDE; PRAMOXINE HYDROCHLORIDE; PETROLATUM</SubstanceName>
<StrengthNumber>14.4; .25; 1; 15</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions: 1 Adults: when practical, cleanse the affected area by patting or blottign with an appropriate cleansing wipe. Gently dry by patting or blotting with a tissue or a soft cloth before applying., 2 When first opening the tube, puncture foil seal with top end of cap, 3 Apply externally or in the lower portion of the anal canal only, 4 Apply to the affected area up to 4 times daily, especially at night, in the morning or after each bowel movement, 5 For application in the lower anal canal: remove cover from dispensing cap. Attach dispensing cap to tube, lubricate dispensing cap well, then gently insert dispensing cap partway into the anus., 6 Thoroughly cleanse dispensing cap after each use and replace cover., 7 Children under 12 years of age: ask a doctor.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62157-752-01</NDCCode>
<PackageDescription>20 kg in 1 DRUM (62157-752-01)</PackageDescription>
<NDC11Code>62157-0752-01</NDC11Code>
<ProductNDC>62157-752</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20181215</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR ANIMAL DRUG COMPOUNDING</MarketingCategoryName>
<LabelerName>AX Pharmaceutical Corp</LabelerName>
<SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62935-752-75</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (62935-752-75) * .25 mL in 1 SYRINGE (62935-751-74) * .25 mL in 1 SYRINGE (62935-750-75) </PackageDescription>
<NDC11Code>62935-0752-75</NDC11Code>
<ProductNDC>62935-752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eligard</ProprietaryName>
<NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20020515</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021343</ApplicationNumber>
<LabelerName>TOLMAR PHARMACEUTICALS INC.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65015-752-61</NDCCode>
<PackageDescription>100 kg in 1 DRUM (65015-752-61)</PackageDescription>
<NDC11Code>65015-0752-61</NDC11Code>
<ProductNDC>65015-752</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150128</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>MYLAN LABORATORIES LIMITED</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68094-752-62</NDCCode>
<PackageDescription>3 TRAY in 1 CASE (68094-752-62) > 10 CUP, UNIT-DOSE in 1 TRAY > 5 mL in 1 CUP, UNIT-DOSE (68094-752-59) </PackageDescription>
<NDC11Code>68094-0752-62</NDC11Code>
<ProductNDC>68094-752</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Digoxin</ProprietaryName>
<NonProprietaryName>Digoxin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120504</StartMarketingDate>
<EndMarketingDate>20190531</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021648</ApplicationNumber>
<LabelerName>Precision Dose Inc.</LabelerName>
<SubstanceName>DIGOXIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cardiac Glycoside [EPC],Cardiac Glycosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120504</StartMarketingDatePackage>
<EndMarketingDatePackage>20190531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70860-100-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (70860-100-10) / 5 mL in 1 VIAL, SINGLE-DOSE (70860-100-41) </PackageDescription>
<NDC11Code>70860-0100-10</NDC11Code>
<ProductNDC>70860-100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170101</StartMarketingDate>
<EndMarketingDate>20270331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065501</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170101</StartMarketingDatePackage>
<EndMarketingDatePackage>20270331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin for injection is a macrolide antibacterial drug indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Azithromycin for Injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-hepta-methyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D- xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the monohydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12· H 2O and a molecular weight of 767.0. Azithromycin for Injection, USP consists of azithromycin monohydrate and the following inactive ingredients: citric acid and sodium hydroxide. Azithromycin for Injection, USP is supplied in lyophilized form in a 10 mL single-dose vial equivalent to 500 mg of azithromycin for intravenous administration. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate equivalent to 100 mg of azithromycin.</Description>
</NDC>
<NDC>
<NDCCode>70860-103-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70860-103-10) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (70860-103-41) </PackageDescription>
<NDC11Code>70860-0103-10</NDC11Code>
<ProductNDC>70860-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>20170101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207322</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[iU]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Polymyxin B sulfate is a drug of choice in the treatment of infections of the urinary tract, meninges, and bloodstream caused by susceptible strains of Ps. aeruginosa. It may also be used topically and subconjunctivally in the treatment of infections of the eye caused by susceptible strains of Ps. aeruginosa. It may be indicated in serious infections caused by susceptible strains of the following organisms, when less potentially toxic drugs are ineffective or contraindicated. H. influenzae, specifically meningeal infections. Escherichia coli, specifically urinary tract infections. Aerobacter aerogenes, specifically bacteremia. Klebsiella pneumoniae, specifically bacteremia. NOTE: IN MENINGEAL INFECTIONS, POLYMYXIN B SULFATE SHOULD BE ADMINISTERED ONLY BY THE INTRATHECAL ROUTE. To reduce the development of drug-resistant bacteria and maintain the effectiveness of polymyxin B and other antibacterial drugs, polymyxin B should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Polymyxin B for Injection, USP is one of a group of basic polypeptide antibiotics derived from B. polymyxa (B. aerosporous). Polymyxin B sulfate is the sulfate salt of Polymyxins B 1and B 2, which are produced by the growth of Bacillus polymyxa(Prazmowski) Migula (Fam. Bacillacea). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on the anhydrous basis. The structural formulae are:. Each vial contains 500,000 polymyxin B units for parenteral or ophthalmic administration. Polymyxin B for Injection, USP is in powder form suitable for preparation of sterile solutions for intramuscular, intravenous drip, intrathecal, or ophthalmic use. In the medical literature, dosages have frequently been given in terms of equivalent weights of pure polymyxin B base. Each milligram of pure polymyxin B base is equivalent to 10,000 units of polymyxin B and each microgram of pure polymyxin B base is equivalent to 10 units of polymyxin B. Aqueous solutions of polymyxin B sulfate may be stored up to 12 months without significant loss of potency if kept under refrigeration. In the interest of safety, solutions for parenteral use should be stored under refrigeration and any unused portion should be discarded after 72 hours. Polymyxin B sulfate should not be stored in alkaline solutions since they are less stable.</Description>
</NDC>
<NDC>
<NDCCode>70860-104-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70860-104-10) > 10 mL in 1 VIAL (70860-104-41) </PackageDescription>
<NDC11Code>70860-0104-10</NDC11Code>
<ProductNDC>70860-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205694</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>70860-105-20</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70860-105-20) > 20 mL in 1 VIAL (70860-105-41) </PackageDescription>
<NDC11Code>70860-0105-20</NDC11Code>
<ProductNDC>70860-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205694</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 gram vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9] oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>70860-106-10</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (70860-106-10) / 10.8 mL in 1 VIAL</PackageDescription>
<NDC11Code>70860-0106-10</NDC11Code>
<ProductNDC>70860-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caspofungin Acetate</ProprietaryName>
<NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171004</StartMarketingDate>
<EndMarketingDate>20240731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207092</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/10.8mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20171004</StartMarketingDatePackage>
<EndMarketingDatePackage>20240731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. ( 1) , 2 Treatment of candidemia and the following Candidainfections: intra-abdominal abscesses, peritonitis and pleural space infections. ( 1) , 3 Treatment of esophageal candidiasis. ( 1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. ( 1) .</IndicationAndUsage>
<Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis.Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4 R,5 S)-5-[(2-aminoethyl)amino]- N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3 R)-3-hydroxy-L-ornithine] pneumocandin B 0diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C 52H 88N 10O 152C 2H 4O 2and the formula weight is 1213.42. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>70860-107-10</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (70860-107-10) > 10.8 mL in 1 VIAL</PackageDescription>
<NDC11Code>70860-0107-10</NDC11Code>
<ProductNDC>70860-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caspofungin Acetate</ProprietaryName>
<NonProprietaryName>Caspofungin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207092</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>CASPOFUNGIN ACETATE</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mg/10.8mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Caspofungin acetate for injection is an echinocandin antifungal indicated in adults and pediatric patients (3 months of age and older) for: : 1 Empirical therapy for presumed fungal infections in febrile, neutropenic patients. (1) , 2 Treatment of candidemia and the following Candida infections: intra-abdominal abscesses, peritonitis and pleural space infections. (1) , 3 Treatment of esophageal candidiasis. (1) , 4 Treatment of invasive aspergillosis in patients who are refractory to or intolerant of other therapies. (1) .</IndicationAndUsage>
<Description>Caspofungin acetate for injection is a sterile, lyophilized product for intravenous (IV) infusion that contains a semisynthetic lipopeptide (echinocandin) compound synthesized from a fermentation product of Glarea lozoyensis. Caspofungin acetate is an echinocandin antifungal that inhibits the synthesis of β (1,3)-D-glucan, an integral component of the fungal cell wall. Caspofungin acetate is 1-[(4R,5S)-5-[(2-aminoethyl)amino]-N2-(10,12-dimethyl-1-oxotetradecyl)-4-hydroxy-L-ornithine]-5-[(3R)-3-hydroxy-L-ornithine] pneumocandin B0 diacetate (salt). Caspofungin acetate for injection 50 mg vial contains 50 mg of caspofungin equivalent to 55.5 mg of caspofungin acetate. Caspofungin acetate for injection 50 mg vial also contains 39 mg sucrose, 26 mg mannitol, 2 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate for injection 70 mg vial contains 70 mg of caspofungin equivalent to 77.7 mg of caspofungin acetate. Caspofungin acetate for injection 70 mg vial also contains 54 mg sucrose, 36 mg mannitol, 2.7 mg glacial acetic acid added as a buffering agent, and sodium hydroxide added as a pH adjuster ingredient. Caspofungin acetate is a hygroscopic, white to off-white powder. It is freely soluble in water and methanol, and slightly soluble in ethanol. The pH of a saturated aqueous solution of caspofungin acetate is approximately 6.6. The empirical formula is C52H88N10O152C2H4O2 and the formula weight is 1213.42. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>70860-112-15</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70860-112-15) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-112-41) </PackageDescription>
<NDC11Code>70860-0112-15</NDC11Code>
<ProductNDC>70860-112</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>70860-113-15</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70860-113-15) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-113-41) </PackageDescription>
<NDC11Code>70860-0113-15</NDC11Code>
<ProductNDC>70860-113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
<NDC>
<NDCCode>70860-114-15</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70860-114-15) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (70860-114-41) </PackageDescription>
<NDC11Code>70860-0114-15</NDC11Code>
<ProductNDC>70860-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090354</ApplicationNumber>
<LabelerName>Athenex Pharmaceutical Division, LLC.</LabelerName>
<SubstanceName>AMPICILLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:. Respiratory Tract Infections caused by Streptococcus pneumoniae, Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci. Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria. Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis. Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis. Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy. Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Indicated surgical procedures should be performed.</IndicationAndUsage>
<Description>Ampicillin for Injection, USP the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. Ampicillin for Injection, USP is a dry, white to off-white powder. The reconstituted solution is clear, colorless and free from visible particulates. Each vial of Ampicillin for Injection, USP contains ampicillin sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for Injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin. It has the following molecular structure:. The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.</Description>
</NDC>
</NDCList>