{
"NDC": [
{
"NDCCode": "70882-105-56",
"PackageDescription": "56 TABLET, FILM COATED in 1 BLISTER PACK (70882-105-56)",
"NDC11Code": "70882-0105-56",
"ProductNDC": "70882-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pioglitazone And Metformin",
"NonProprietaryName": "Pioglitazone And Metformin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091273",
"LabelerName": "Cambridge Therapeutics Technologies, LLC",
"SubstanceName": "PIOGLITAZONE HYDROCHLORIDE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "15; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [CS],PPAR gamma [CS],Thiazolidinedione [EPC],Thiazolidinediones [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC],Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Pioglitazone and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus when treatment with both pioglitazone and metformin is appropriate [see CLINICAL STUDIES (14)]. Important Limitations of Use. Pioglitazone exerts its antihyperglycemic effect only in the presence of endogenous insulin. Pioglitazone and metformin hydrochloride tablets should not be used to treat type 1 diabetes or diabetic ketoacidosis, as it would not be effective in these settings. Use caution in patients with liver disease [see WARNINGS AND PRECAUTIONS (5.5)].",
"Description": "Pioglitazone and metformin hydrochloride tablets, USP are a thiazolidinediones and biguanide combination product that contains two oral antidiabetic medications: pioglitazone and metformin hydrochloride. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl) ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. Pioglitazone hydrochloride is an odorless white to off white crystalline powder that has a molecular formula of C19H20N2O3SHCl and a molecular weight of 392.91. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white to almost white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is as shown. Pioglitazone and metformin hydrochloride tablets, USP are available for oral administration containing 15 mg pioglitazone (as the base) with 500 mg metformin hydrochloride (15 mg/500 mg) or 15 mg pioglitazone (as the base) with 850 mg metformin hydrochloride (15 mg/850 mg) formulated with the following inactive ingredients: croscarmellose sodium, hydroxypropylcellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, talc, and titanium dioxide."
},
{
"NDCCode": "70882-124-56",
"PackageDescription": "56 TABLET in 1 BLISTER PACK (70882-124-56)",
"NDC11Code": "70882-0124-56",
"ProductNDC": "70882-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hcl",
"NonProprietaryName": "Metformin Hcl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090564",
"LabelerName": "Cambridge Therapeutics Technologies, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"IndicationAndUsage": "Metformin Hydrochloride Tablets USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Tablets USP are oral antihyperglycemic drugs used in the management of type 2 diabetes. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin Hydrochloride Tablets USP contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients povidone (K-30), povidone (K-90), pregelatinized starch,and magnesium stearate. In addition, the coating for the tablets contains artificial blackberry flavor, hypromellose and polyethylene glycol."
},
{
"NDCCode": "42934-105-31",
"PackageDescription": "56 TABLET, FILM COATED in 1 BLISTER PACK (42934-105-31) ",
"NDC11Code": "42934-0105-31",
"ProductNDC": "42934-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Varenicline Tartrate",
"NonProprietaryName": "Varenicline Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217151",
"LabelerName": "Medley Pharmaceuticals Limited",
"SubstanceName": "VARENICLINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/561",
"Pharm_Classes": "Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230725",
"SamplePackage": "N"
},
{
"NDCCode": "42934-105-51",
"PackageDescription": "56 TABLET, FILM COATED in 1 BOTTLE (42934-105-51) ",
"NDC11Code": "42934-0105-51",
"ProductNDC": "42934-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Varenicline Tartrate",
"NonProprietaryName": "Varenicline Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217151",
"LabelerName": "Medley Pharmaceuticals Limited",
"SubstanceName": "VARENICLINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/561",
"Pharm_Classes": "Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230725",
"SamplePackage": "N"
},
{
"NDCCode": "57627-105-02",
"PackageDescription": "1 JAR in 1 BOX (57627-105-02) > 56 g in 1 JAR (57627-105-01)",
"NDC11Code": "57627-0105-02",
"ProductNDC": "57627-105",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Defense Creme Normal Dry Spf 15",
"ProprietaryNameSuffix": "Merle Norman",
"NonProprietaryName": "Octinoxate,titanium Dioxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110420",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Merle Norman",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "6.5; 2",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2014-04-28"
},
{
"NDCCode": "61269-105-56",
"PackageDescription": "1 TUBE in 1 CARTON (61269-105-56) / 28 g in 1 TUBE",
"NDC11Code": "61269-0105-56",
"ProductNDC": "61269-105",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bacitracin Zinc",
"NonProprietaryName": "Bacitracin Zinc",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210510",
"EndMarketingDate": "20241031",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "H2-Pharma, LLC",
"SubstanceName": "BACITRACIN ZINC",
"StrengthNumber": "500",
"StrengthUnit": "[USP'U]/g",
"Pharm_Classes": "Decreased Cell Wall Synthesis & Repair [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210629",
"EndMarketingDatePackage": "20241031",
"SamplePackage": "N",
"IndicationAndUsage": "First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "66435-105-99",
"PackageDescription": "4 DOSE PACK in 1 CARTON (66435-105-99) > 14 TABLET in 1 DOSE PACK (66435-105-56)",
"NDC11Code": "66435-0105-99",
"ProductNDC": "66435-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ribasphere Ribapak",
"NonProprietaryName": "Ribavirin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077456",
"LabelerName": "Kadmon Pharmaceuticals, LLC",
"SubstanceName": "RIBAVIRIN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleoside Analog [EXT],Nucleoside Analog Antiviral [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-10-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "0093-7743-56",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0093-7743-56) ",
"NDC11Code": "00093-7743-56",
"ProductNDC": "0093-7743",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190219",
"EndMarketingDate": "20210131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065485",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "105",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190219",
"EndMarketingDatePackage": "20210131",
"SamplePackage": "N"
},
{
"NDCCode": "0093-8232-56",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0093-8232-56) ",
"NDC11Code": "00093-8232-56",
"ProductNDC": "0093-8232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan And Hydrochlorothiazide",
"NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077369",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "IRBESARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "300; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130827",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets compared to irbesartan or hydrochlorothiazide (HCTZ) monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. Figure 1a: Probability of Achieving SBP <140 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 1b: Probability of Achieving SBP <130 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2a: Probability of Achieving DBP <90 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2b: Probability of Achieving DBP <80 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. * For all probability curves, patients without blood pressure measurements at Week 7 (Study VI) and Week 8 (Study V) were counted as not reaching goal (intent-to-treat analysis). The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets rises to about 40% (systolic) or 70% (diastolic).",
"Description": "Irbesartan and Hydrochlorothiazide Tablets USP are a combination of an angiotensin II receptor antagonist (AT1 subtype), irbesartan, USP and a thiazide diuretic, hydrochlorothiazide (HCTZ), USP. Irbesartan, USP is a non-peptide compound, chemically described as a 2-Butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its structural formula is. C25H28N6O M.W. 428.5. Irbesartan, USP is a white to off-white crystalline powder. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide, USP is 6-Chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its structural formula is. C7H8ClN3O4S2 M.W. 297.7. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. Hydrochlorothiazide, USP is very slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and Hydrochlorothiazide Tablets USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. Inactive ingredients include: colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, povidone, pregelatinized corn starch and titanium dioxide."
},
{
"NDCCode": "0093-8238-56",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0093-8238-56) ",
"NDC11Code": "00093-8238-56",
"ProductNDC": "0093-8238",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irbesartan And Hydrochlorothiazide",
"NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077369",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "IRBESARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "150; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130124",
"SamplePackage": "N",
"IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets compared to irbesartan or hydrochlorothiazide (HCTZ) monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. Figure 1a: Probability of Achieving SBP <140 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 1b: Probability of Achieving SBP <130 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2a: Probability of Achieving DBP <90 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2b: Probability of Achieving DBP <80 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. * For all probability curves, patients without blood pressure measurements at Week 7 (Study VI) and Week 8 (Study V) were counted as not reaching goal (intent-to-treat analysis). The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets rises to about 40% (systolic) or 70% (diastolic).",
"Description": "Irbesartan and Hydrochlorothiazide Tablets USP are a combination of an angiotensin II receptor antagonist (AT1 subtype), irbesartan, USP and a thiazide diuretic, hydrochlorothiazide (HCTZ), USP. Irbesartan, USP is a non-peptide compound, chemically described as a 2-Butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its structural formula is. C25H28N6O M.W. 428.5. Irbesartan, USP is a white to off-white crystalline powder. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide, USP is 6-Chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its structural formula is. C7H8ClN3O4S2 M.W. 297.7. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. Hydrochlorothiazide, USP is very slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and Hydrochlorothiazide Tablets USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. Inactive ingredients include: colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, povidone, pregelatinized corn starch and titanium dioxide."
},
{
"NDCCode": "0143-9666-06",
"PackageDescription": "6 CONTAINER in 1 CARTON (0143-9666-06) / 200 mL in 1 CONTAINER (0143-9666-01) ",
"NDC11Code": "00143-9666-06",
"ProductNDC": "0143-9666",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078764",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120130",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 \"Indirect Food Additives\". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0143-9667-06",
"PackageDescription": "6 CONTAINER in 1 CARTON (0143-9667-06) / 100 mL in 1 CONTAINER (0143-9667-01) ",
"NDC11Code": "00143-9667-06",
"ProductNDC": "0143-9667",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078764",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120130",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 \"Indirect Food Additives\". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0143-9668-06",
"PackageDescription": "6 CONTAINER in 1 CARTON (0143-9668-06) / 200 mL in 1 CONTAINER (0143-9668-01) ",
"NDC11Code": "00143-9668-06",
"ProductNDC": "0143-9668",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078698",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20120130",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 \"Indirect Food Additives\". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0143-9668-10",
"PackageDescription": "10 CONTAINER in 1 CARTON (0143-9668-10) / 200 mL in 1 CONTAINER (0143-9668-01) ",
"NDC11Code": "00143-9668-10",
"ProductNDC": "0143-9668",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078698",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120130",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 \"Indirect Food Additives\". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0143-9669-06",
"PackageDescription": "6 CONTAINER in 1 CARTON (0143-9669-06) / 100 mL in 1 CONTAINER (0143-9669-01) ",
"NDC11Code": "00143-9669-06",
"ProductNDC": "0143-9669",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078698",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20120130",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 \"Indirect Food Additives\". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0143-9669-10",
"PackageDescription": "10 CONTAINER in 1 CARTON (0143-9669-10) / 100 mL in 1 CONTAINER (0143-9669-01) ",
"NDC11Code": "00143-9669-10",
"ProductNDC": "0143-9669",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078698",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120130",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 \"Indirect Food Additives\". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0143-9899-91",
"PackageDescription": "6 VIAL in 1 CARTON (0143-9899-91) / 100 mL in 1 VIAL (0143-9899-01) ",
"NDC11Code": "00143-9899-91",
"ProductNDC": "0143-9899",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076736",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050823",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 \"Indirect Food Additives\". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "0409-4196-05",
"PackageDescription": "6 POUCH in 1 CASE (0409-4196-05) > 1 BAG in 1 POUCH > 1000 mL in 1 BAG",
"NDC11Code": "00409-4196-05",
"ProductNDC": "0409-4196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Histidine, Proline, Serine, Tyrosine, Glycine, Sodium Chloride, Potassium Acetate, Phosphoric Acid, And Magnesium Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110323",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017789",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; HISTIDINE; PROLINE; SERINE; TYROSINE; GLYCINE; SODIUM CHLORIDE; POTASSIUM ACETATE; PHOSPHORIC ACID; MAGNESIUM ACETATE",
"StrengthNumber": "252; 329; 252; 140; 154; 182; 56; 280; 448; 343; 105; 300; 147; 31; 448; 234; 128; 40; 21",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-04-20",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "33342-105-11",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (33342-105-11) ",
"NDC11Code": "33342-0105-11",
"ProductNDC": "33342-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203359",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160614",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: Schizophrenia (1.1) Bipolar I disorder manic episodes (1.2) Bipolar disorder, depressive episodes (1.2).",
"Description": "Quetiapine fumarate USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water.Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach, one side debossed with “F71”), 50 mg (round, white, one side debossed with “F72”), 100 mg (round, yellow one side debossed with “F73”), 200 mg (round, white, one side debossed with \"F75”), 300 mg (capsule-shaped, white, one side debossed with \"F76”), and 400 mg (capsule-shaped, yellow, one side debossed with “F77”) tablets.Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, colloidal silicon di-oxide, hypromellose, polyethylene glycol, and titanium dioxide.The 25 mg tablets contain red ferric oxide and yellow ferric oxide and the 100 mg and 400 mg tablets contain only yellow ferric oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.39 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.51 mg of quetiapine fumarate equivalent to 400 mg quetiapine."
},
{
"NDCCode": "33342-105-15",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (33342-105-15) ",
"NDC11Code": "33342-0105-15",
"ProductNDC": "33342-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203359",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160614",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: Schizophrenia (1.1) Bipolar I disorder manic episodes (1.2) Bipolar disorder, depressive episodes (1.2).",
"Description": "Quetiapine fumarate USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water.Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach, one side debossed with “F71”), 50 mg (round, white, one side debossed with “F72”), 100 mg (round, yellow one side debossed with “F73”), 200 mg (round, white, one side debossed with \"F75”), 300 mg (capsule-shaped, white, one side debossed with \"F76”), and 400 mg (capsule-shaped, yellow, one side debossed with “F77”) tablets.Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, colloidal silicon di-oxide, hypromellose, polyethylene glycol, and titanium dioxide.The 25 mg tablets contain red ferric oxide and yellow ferric oxide and the 100 mg and 400 mg tablets contain only yellow ferric oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.39 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.51 mg of quetiapine fumarate equivalent to 400 mg quetiapine."
},
{
"NDCCode": "33342-105-39",
"PackageDescription": "9 BLISTER PACK in 1 CARTON (33342-105-39) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "33342-0105-39",
"ProductNDC": "33342-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203359",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160614",
"SamplePackage": "N",
"IndicationAndUsage": "Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: Schizophrenia (1.1) Bipolar I disorder manic episodes (1.2) Bipolar disorder, depressive episodes (1.2).",
"Description": "Quetiapine fumarate USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water.Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach, one side debossed with “F71”), 50 mg (round, white, one side debossed with “F72”), 100 mg (round, yellow one side debossed with “F73”), 200 mg (round, white, one side debossed with \"F75”), 300 mg (capsule-shaped, white, one side debossed with \"F76”), and 400 mg (capsule-shaped, yellow, one side debossed with “F77”) tablets.Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, colloidal silicon di-oxide, hypromellose, polyethylene glycol, and titanium dioxide.The 25 mg tablets contain red ferric oxide and yellow ferric oxide and the 100 mg and 400 mg tablets contain only yellow ferric oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.39 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.51 mg of quetiapine fumarate equivalent to 400 mg quetiapine."
},
{
"NDCCode": "43251-3213-3",
"PackageDescription": "1 TUBE in 1 CARTON (43251-3213-3) > 56 g in 1 TUBE",
"NDC11Code": "43251-3213-03",
"ProductNDC": "43251-3213",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Natralia Cramp Relief",
"NonProprietaryName": "Methyl Salicylate",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Laderma Trading Pty Ltd",
"SubstanceName": "METHYL SALICYLATE",
"StrengthNumber": "105",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the temporary relief of minor aches and pains of muscles and joints associated with simple backache, arthritis, strains, bruises and sprains."
},
{
"NDCCode": "69639-105-01",
"PackageDescription": "1 VIAL in 1 CARTON (69639-105-01) / 20 mL in 1 VIAL",
"NDC11Code": "69639-0105-01",
"ProductNDC": "69639-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Akynzeo",
"NonProprietaryName": "Fosnetupitant And Palonosetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200615",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210493",
"LabelerName": "Helsinn Therapeutics (U.S.), Inc.",
"SubstanceName": "FOSNETUPITANT; PALONOSETRON HYDROCHLORIDE",
"StrengthNumber": "260; .28",
"StrengthUnit": "mg/20mL; mg/20mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "AKYNZEO capsules is indicated in combination with dexamethasone in adults for the prevention of acute and delayed nausea and vomiting associated with initial and repeat courses of cancer chemotherapy, including, but not limited to, highly emetogenic chemotherapy. AKYNZEO capsules is a combination of palonosetron and netupitant: palonosetron prevents nausea and vomiting during the acute phase and netupitant prevents nausea and vomiting during both the acute and delayed phase after cancer chemotherapy. AKYNZEO for injection and AKYNZEO injection are indicated in combination with dexamethasone in adults for the prevention of acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy. AKYNZEO for injection is a combination of palonosetron and fosnetupitant, a prodrug of netupitant: palonosetron prevents nausea and vomiting during the acute phase and fosnetupitant prevents nausea and vomiting during both the acute and delayed phase after cancer chemotherapy. Limitations of Use AKYNZEO for injection and AKYNZEO injection have not been studied for the prevention of nausea and vomiting associated with anthracycline plus cyclophosphamide chemotherapy.",
"Description": "AKYNZEO (300 mg netupitant/0.5 mg palonosetron) capsules are an oral combination product of netupitant, a substance P/neurokinin 1 (NK-1) receptor antagonist, and palonosetron hydrochloride, a serotonin-3 (5-HT3) receptor antagonist. Both netupitant and palonosetron hydrochloride are anti-nausea and anti-emetic agents. Netupitant is chemically described: 2-[3,5-bis(trifluoromethyl)phenyl]-N, 2 dimethyl-N-[4-(2-methylphenyl)-6-(4-methylpiperazin-1-yl)pyridin-3-yl] propanamide. The empirical formula is C30H32F6N4O, with a molecular weight of 578.61. Netupitant exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is chemically described: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1H-benz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Netupitant is white to off-white crystalline powder. It is freely soluble in toluene and acetone, soluble in isopropanol and ethanol, and very slightly soluble in water. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Each AKYNZEO capsule is composed of one white-caramel hard gelatin capsule which contains three tablets each containing 100 mg netupitant and one gelatin capsule containing 0.5 mg palonosetron (equivalent to 0.56 mg palonosetron hydrochloride). The inactive ingredients are butylated hydroxyanisole (BHA), croscarmellose sodium, gelatin, glycerin, magnesium stearate, microcrystalline cellulose, mono- and di-glycerides of capryl/capric acid, polyglyceryl dioleate, povidone K-30, purified water, red iron oxide, silicon dioxide, sodium stearyl fumarate, sorbitol, sucrose fatty acid esters, titanium dioxide and yellow iron oxide. It may contain traces of medium-chain triglycerides, lecithin, and denatured ethanol. AKYNZEO (235 mg fosnetupitant/0.25 mg palonosetron) for injection is a combination product of fosnetupitant, a prodrug of netupitant, which is a substance P/neurokinin 1 (NK-1) receptor antagonist, and palonosetron hydrochloride, a serotonin-3 (5-HT3) receptor antagonist. Fosnetupitant chloride hydrochloride is chemically described as 2-(3,5-bis-trifluoromethylphenyl)-N-methyl-N-[6-(4-methyl-4-O-methylene-phosphatepiperazinium-1-yl)-4-o-tolyl-pyridin-3-yl]-isobutyramide chloride hydrochloride. The empirical formula is C31H36F6N4O5PClHCl, with a molecular weight of 761.53. Fosnetupitant chloride hydrochloride exists as a single isomer and has the following structural formula. Fosnetupitant chloride hydrochloride is white to off-white to yellowish solid or powder. Its solubility is pH dependent: at acidic pH (pH 2), its solubility is 1.4 mg/mL; at basic pH (pH 10), its solubility is 11.5 mg/mL. Palonosetron hydrochloride is described above in this section. AKYNZEO for injection is available for intravenous infusion supplied as a sterile lyophilized powder. Each vial of AKYNZEO for injection contains 235 mg of fosnetupitant (equivalent to 260 mg fosnetupitant chloride hydrochloride) and 0.25 mg of palonosetron (equivalent to 0.28 mg of palonosetron hydrochloride). The inactive ingredients are edetate disodium (6.4 mg), mannitol (760 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment). AKYNZEO injection is available for intravenous infusion supplied as a sterile solution in a single-dose vial. Each vial of AKYNZEO injection contains 235 mg of fosnetupitant (equivalent to 260 mg fosnetupitant chloride hydrochloride) and 0.25 mg of palonosetron (equivalent to 0.28 mg of palonosetron hydrochloride). The inactive ingredients are edetate disodium (3.2 mg), mannitol (760 mg), water for injection, sodium hydroxide and/or hydrochloric acid (for pH adjustment)."
},
{
"NDCCode": "79950-016-01",
"PackageDescription": "1 CAN in 1 CARTON (79950-016-01) / 60 g in 1 CAN",
"NDC11Code": "79950-0016-01",
"ProductNDC": "79950-016",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bondi Sands Spf 60 Sunny Spritz Face Mist",
"NonProprietaryName": "Homosalate, Octocrylene, Octisalate, Avobenzone",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250106",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "BONDI SANDS (USA) INC.",
"SubstanceName": "OCTISALATE; OCTOCRYLENE; AVOBENZONE; HOMOSALATE",
"StrengthNumber": "35; 56; 30; 105",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2025-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250106",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. ."
},
{
"NDCCode": "79950-022-01",
"PackageDescription": "1 CAN in 1 CARTON (79950-022-01) / 60 g in 1 CAN",
"NDC11Code": "79950-0022-01",
"ProductNDC": "79950-022",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bondi Sands Fragrance Free Face Spf 50 Sunscreen Mist",
"NonProprietaryName": "Homosalate, Octocrylene, Octisalate, Avobenzone",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250210",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "BONDI SANDS (USA) INC.",
"SubstanceName": "OCTOCRYLENE; AVOBENZONE; HOMOSALATE; OCTISALATE",
"StrengthNumber": "56; 30; 105; 35",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2025-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250210",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. ."
},
{
"NDCCode": "70882-101-28",
"PackageDescription": "28 TABLET, FILM COATED in 1 BLISTER PACK (70882-101-28)",
"NDC11Code": "70882-0101-28",
"ProductNDC": "70882-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19840911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062505",
"LabelerName": "Cambridge Therapeutics Technologies, LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of Doxycycline Hyclate Tablets and other antibacterial drugs, Doxycycline Hyclate Tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as Doxycycline Hyclate Tablets and Capsules for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8∙H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8∙HCl)2∙C2H6O∙H2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet, for oral administration, contains doxycycline Hyclate equivalent to 100 mg doxycycline. In addition, each tablet contains the following inactive ingredients; anhydrous lactose, colloidal silicon dioxide, FD&C Red No. 40, FD&C Yellow No. 6, hypromellose, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, stearic acid, and titanium dioxide."
},
{
"NDCCode": "70882-102-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (70882-102-30)",
"NDC11Code": "70882-0102-30",
"ProductNDC": "70882-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077575",
"LabelerName": "Cambridge Therapeutics Technologies, LLC",
"SubstanceName": "ATORVASTATIN CALCIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin calcium tablets are a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca and its molecular weight is 1155.38. Its structural formula is. Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: carboxymethylcellulose sodium, ferric oxide yellow, glycerin, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, talc, tromethamine."
},
{
"NDCCode": "70882-103-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (70882-103-30)",
"NDC11Code": "70882-0103-30",
"ProductNDC": "70882-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075994",
"LabelerName": "Cambridge Therapeutics Technologies, LLC",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-07-07",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"IndicationAndUsage": "Lisinopril tablets are an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5 2H2O and its structural formula is. Lisinopril, USP is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, for oral administration, are supplied as 5 mg, 10 mg, and 20 mg tablets. Inactive Ingredients. 5 mg and 10 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide. 20 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide, yellow iron oxide."
},
{
"NDCCode": "70882-104-30",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (70882-104-30)",
"NDC11Code": "70882-0104-30",
"ProductNDC": "70882-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075994",
"LabelerName": "Cambridge Therapeutics Technologies, LLC",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-07-07",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"IndicationAndUsage": "Lisinopril tablets are an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5 2H2O and its structural formula is. Lisinopril, USP is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, for oral administration, are supplied as 5 mg, 10 mg, and 20 mg tablets. Inactive Ingredients. 5 mg and 10 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide. 20 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide, yellow iron oxide."
},
{
"NDCCode": "70882-106-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (70882-106-30)",
"NDC11Code": "70882-0106-30",
"ProductNDC": "70882-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077575",
"LabelerName": "Cambridge Therapeutics Technologies, LLC",
"SubstanceName": "ATORVASTATIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.",
"Description": "Atorvastatin calcium tablets are a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca and its molecular weight is 1155.38. Its structural formula is. Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: carboxymethylcellulose sodium, ferric oxide yellow, glycerin, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, talc, tromethamine."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70882-105-56</NDCCode>
<PackageDescription>56 TABLET, FILM COATED in 1 BLISTER PACK (70882-105-56)</PackageDescription>
<NDC11Code>70882-0105-56</NDC11Code>
<ProductNDC>70882-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pioglitazone And Metformin</ProprietaryName>
<NonProprietaryName>Pioglitazone And Metformin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091273</ApplicationNumber>
<LabelerName>Cambridge Therapeutics Technologies, LLC</LabelerName>
<SubstanceName>PIOGLITAZONE HYDROCHLORIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [CS],PPAR gamma [CS],Thiazolidinedione [EPC],Thiazolidinediones [CS],Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC],Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pioglitazone and metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus when treatment with both pioglitazone and metformin is appropriate [see CLINICAL STUDIES (14)]. Important Limitations of Use. Pioglitazone exerts its antihyperglycemic effect only in the presence of endogenous insulin. Pioglitazone and metformin hydrochloride tablets should not be used to treat type 1 diabetes or diabetic ketoacidosis, as it would not be effective in these settings. Use caution in patients with liver disease [see WARNINGS AND PRECAUTIONS (5.5)].</IndicationAndUsage>
<Description>Pioglitazone and metformin hydrochloride tablets, USP are a thiazolidinediones and biguanide combination product that contains two oral antidiabetic medications: pioglitazone and metformin hydrochloride. Pioglitazone [(±)-5-[[4-[2-(5-ethyl-2-pyridinyl) ethoxy]phenyl]methyl]-2,4-] thiazolidinedione monohydrochloride contains one asymmetric carbon, and the compound is synthesized and used as the racemic mixture. The two enantiomers of pioglitazone interconvert in vivo. No differences were found in the pharmacologic activity between the two enantiomers. The structural formula is as shown. Pioglitazone hydrochloride is an odorless white to off white crystalline powder that has a molecular formula of C19H20N2O3SHCl and a molecular weight of 392.91. It is soluble in N,N-dimethylformamide, slightly soluble in anhydrous ethanol, very slightly soluble in acetone and acetonitrile, practically insoluble in water, and insoluble in ether. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is a white to almost white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.62. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is as shown. Pioglitazone and metformin hydrochloride tablets, USP are available for oral administration containing 15 mg pioglitazone (as the base) with 500 mg metformin hydrochloride (15 mg/500 mg) or 15 mg pioglitazone (as the base) with 850 mg metformin hydrochloride (15 mg/850 mg) formulated with the following inactive ingredients: croscarmellose sodium, hydroxypropylcellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70882-124-56</NDCCode>
<PackageDescription>56 TABLET in 1 BLISTER PACK (70882-124-56)</PackageDescription>
<NDC11Code>70882-0124-56</NDC11Code>
<ProductNDC>70882-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hcl</ProprietaryName>
<NonProprietaryName>Metformin Hcl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090564</ApplicationNumber>
<LabelerName>Cambridge Therapeutics Technologies, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metformin Hydrochloride Tablets USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Tablets USP are oral antihyperglycemic drugs used in the management of type 2 diabetes. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin Hydrochloride Tablets USP contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients povidone (K-30), povidone (K-90), pregelatinized starch,and magnesium stearate. In addition, the coating for the tablets contains artificial blackberry flavor, hypromellose and polyethylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>42934-105-31</NDCCode>
<PackageDescription>56 TABLET, FILM COATED in 1 BLISTER PACK (42934-105-31) </PackageDescription>
<NDC11Code>42934-0105-31</NDC11Code>
<ProductNDC>42934-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Varenicline Tartrate</ProprietaryName>
<NonProprietaryName>Varenicline Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217151</ApplicationNumber>
<LabelerName>Medley Pharmaceuticals Limited</LabelerName>
<SubstanceName>VARENICLINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/561</StrengthUnit>
<Pharm_Classes>Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42934-105-51</NDCCode>
<PackageDescription>56 TABLET, FILM COATED in 1 BOTTLE (42934-105-51) </PackageDescription>
<NDC11Code>42934-0105-51</NDC11Code>
<ProductNDC>42934-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Varenicline Tartrate</ProprietaryName>
<NonProprietaryName>Varenicline Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217151</ApplicationNumber>
<LabelerName>Medley Pharmaceuticals Limited</LabelerName>
<SubstanceName>VARENICLINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/561</StrengthUnit>
<Pharm_Classes>Cholinergic Agonists [MoA], Cholinergic Receptor Agonist [EPC], Partial Cholinergic Nicotinic Agonist [EPC], Partial Cholinergic Nicotinic Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>57627-105-02</NDCCode>
<PackageDescription>1 JAR in 1 BOX (57627-105-02) > 56 g in 1 JAR (57627-105-01)</PackageDescription>
<NDC11Code>57627-0105-02</NDC11Code>
<ProductNDC>57627-105</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Defense Creme Normal Dry Spf 15</ProprietaryName>
<ProprietaryNameSuffix>Merle Norman</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate,titanium Dioxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110420</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Merle Norman</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>6.5; 2</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-04-28</LastUpdate>
</NDC>
<NDC>
<NDCCode>61269-105-56</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (61269-105-56) / 28 g in 1 TUBE</PackageDescription>
<NDC11Code>61269-0105-56</NDC11Code>
<ProductNDC>61269-105</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bacitracin Zinc</ProprietaryName>
<NonProprietaryName>Bacitracin Zinc</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210510</StartMarketingDate>
<EndMarketingDate>20241031</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>H2-Pharma, LLC</LabelerName>
<SubstanceName>BACITRACIN ZINC</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[USP'U]/g</StrengthUnit>
<Pharm_Classes>Decreased Cell Wall Synthesis & Repair [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210629</StartMarketingDatePackage>
<EndMarketingDatePackage>20241031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid to help prevent infection in minor: 1 cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>66435-105-99</NDCCode>
<PackageDescription>4 DOSE PACK in 1 CARTON (66435-105-99) > 14 TABLET in 1 DOSE PACK (66435-105-56)</PackageDescription>
<NDC11Code>66435-0105-99</NDC11Code>
<ProductNDC>66435-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ribasphere Ribapak</ProprietaryName>
<NonProprietaryName>Ribavirin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077456</ApplicationNumber>
<LabelerName>Kadmon Pharmaceuticals, LLC</LabelerName>
<SubstanceName>RIBAVIRIN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleoside Analog [EXT],Nucleoside Analog Antiviral [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0093-7743-56</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0093-7743-56) </PackageDescription>
<NDC11Code>00093-7743-56</NDC11Code>
<ProductNDC>0093-7743</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190219</StartMarketingDate>
<EndMarketingDate>20210131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065485</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>105</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190219</StartMarketingDatePackage>
<EndMarketingDatePackage>20210131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0093-8232-56</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0093-8232-56) </PackageDescription>
<NDC11Code>00093-8232-56</NDC11Code>
<ProductNDC>0093-8232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077369</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>IRBESARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>300; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets compared to irbesartan or hydrochlorothiazide (HCTZ) monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. Figure 1a: Probability of Achieving SBP <140 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 1b: Probability of Achieving SBP <130 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2a: Probability of Achieving DBP <90 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2b: Probability of Achieving DBP <80 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. * For all probability curves, patients without blood pressure measurements at Week 7 (Study VI) and Week 8 (Study V) were counted as not reaching goal (intent-to-treat analysis). The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets rises to about 40% (systolic) or 70% (diastolic).</IndicationAndUsage>
<Description>Irbesartan and Hydrochlorothiazide Tablets USP are a combination of an angiotensin II receptor antagonist (AT1 subtype), irbesartan, USP and a thiazide diuretic, hydrochlorothiazide (HCTZ), USP. Irbesartan, USP is a non-peptide compound, chemically described as a 2-Butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its structural formula is. C25H28N6O M.W. 428.5. Irbesartan, USP is a white to off-white crystalline powder. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide, USP is 6-Chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its structural formula is. C7H8ClN3O4S2 M.W. 297.7. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. Hydrochlorothiazide, USP is very slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and Hydrochlorothiazide Tablets USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. Inactive ingredients include: colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, povidone, pregelatinized corn starch and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0093-8238-56</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0093-8238-56) </PackageDescription>
<NDC11Code>00093-8238-56</NDC11Code>
<ProductNDC>0093-8238</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077369</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>IRBESARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>150; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irbesartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets compared to irbesartan or hydrochlorothiazide (HCTZ) monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. Figure 1a: Probability of Achieving SBP <140 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 1b: Probability of Achieving SBP <130 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2a: Probability of Achieving DBP <90 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. Figure 2b: Probability of Achieving DBP <80 mmHg in Patients from Initial Therapy Studies V (Week 8) and VI (Week 7)*. * For all probability curves, patients without blood pressure measurements at Week 7 (Study VI) and Week 8 (Study V) were counted as not reaching goal (intent-to-treat analysis). The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone). The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets rises to about 40% (systolic) or 70% (diastolic).</IndicationAndUsage>
<Description>Irbesartan and Hydrochlorothiazide Tablets USP are a combination of an angiotensin II receptor antagonist (AT1 subtype), irbesartan, USP and a thiazide diuretic, hydrochlorothiazide (HCTZ), USP. Irbesartan, USP is a non-peptide compound, chemically described as a 2-Butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro[4.4]non-1-en-4-one. Its structural formula is. C25H28N6O M.W. 428.5. Irbesartan, USP is a white to off-white crystalline powder. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide, USP is 6-Chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its structural formula is. C7H8ClN3O4S2 M.W. 297.7. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. Hydrochlorothiazide, USP is very slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and Hydrochlorothiazide Tablets USP are available for oral administration in film-coated tablets containing either 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP. Inactive ingredients include: colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide black, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, povidone, pregelatinized corn starch and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0143-9666-06</NDCCode>
<PackageDescription>6 CONTAINER in 1 CARTON (0143-9666-06) / 200 mL in 1 CONTAINER (0143-9666-01) </PackageDescription>
<NDC11Code>00143-9666-06</NDC11Code>
<ProductNDC>0143-9666</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078764</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0143-9667-06</NDCCode>
<PackageDescription>6 CONTAINER in 1 CARTON (0143-9667-06) / 100 mL in 1 CONTAINER (0143-9667-01) </PackageDescription>
<NDC11Code>00143-9667-06</NDC11Code>
<ProductNDC>0143-9667</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078764</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0143-9668-06</NDCCode>
<PackageDescription>6 CONTAINER in 1 CARTON (0143-9668-06) / 200 mL in 1 CONTAINER (0143-9668-01) </PackageDescription>
<NDC11Code>00143-9668-06</NDC11Code>
<ProductNDC>0143-9668</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078698</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0143-9668-10</NDCCode>
<PackageDescription>10 CONTAINER in 1 CARTON (0143-9668-10) / 200 mL in 1 CONTAINER (0143-9668-01) </PackageDescription>
<NDC11Code>00143-9668-10</NDC11Code>
<ProductNDC>0143-9668</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078698</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0143-9669-06</NDCCode>
<PackageDescription>6 CONTAINER in 1 CARTON (0143-9669-06) / 100 mL in 1 CONTAINER (0143-9669-01) </PackageDescription>
<NDC11Code>00143-9669-06</NDC11Code>
<ProductNDC>0143-9669</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078698</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0143-9669-10</NDCCode>
<PackageDescription>10 CONTAINER in 1 CARTON (0143-9669-10) / 100 mL in 1 CONTAINER (0143-9669-01) </PackageDescription>
<NDC11Code>00143-9669-10</NDC11Code>
<ProductNDC>0143-9669</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078698</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0143-9899-91</NDCCode>
<PackageDescription>6 VIAL in 1 CARTON (0143-9899-91) / 100 mL in 1 VIAL (0143-9899-01) </PackageDescription>
<NDC11Code>00143-9899-91</NDC11Code>
<ProductNDC>0143-9899</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076736</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole Injection, USP is indicated for the treatment of: : 1 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia. , 2 Cryptococcal meningitis. Before prescribing fluconazole for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole Injection, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as a sterile solution for intravenous use in glass and in plastic containers. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an empirical formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is:. Fluconazole is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Injection, USP is an iso-osmotic, sterile, nonpyrogenic solution of Fluconazole, USP in a sodium chloride or dextrose diluent. Each mL contains 2 mg of Fluconazole, USP and 9 mg of Sodium Chloride, USP or 56 mg of Dextrose, hydrous. The pH ranges from 4.0 to 8.0 in the sodium chloride diluent and from 3.5 to 6.5 in the dextrose diluent. Injection volume of 100 mL is packaged in glass and in plastic containers. Injection volume of 200 mL is packed in plastic containers. The plastic container is fabricated from polypropylene. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., cis-13-docosenoicamide (Erucamide), up to 32 mcg/mL. The Erucamide is an authorized additive listed in the 21 CFR 175.105 "Indirect Food Additives". However, the suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>0409-4196-05</NDCCode>
<PackageDescription>6 POUCH in 1 CASE (0409-4196-05) > 1 BAG in 1 POUCH > 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-4196-05</NDC11Code>
<ProductNDC>0409-4196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Histidine, Proline, Serine, Tyrosine, Glycine, Sodium Chloride, Potassium Acetate, Phosphoric Acid, And Magnesium Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110323</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017789</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; HISTIDINE; PROLINE; SERINE; TYROSINE; GLYCINE; SODIUM CHLORIDE; POTASSIUM ACETATE; PHOSPHORIC ACID; MAGNESIUM ACETATE</SubstanceName>
<StrengthNumber>252; 329; 252; 140; 154; 182; 56; 280; 448; 343; 105; 300; 147; 31; 448; 234; 128; 40; 21</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [CS],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Potassium Compounds [CS],Potassium Salt [EPC],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-20</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>33342-105-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (33342-105-11) </PackageDescription>
<NDC11Code>33342-0105-11</NDC11Code>
<ProductNDC>33342-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203359</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: Schizophrenia (1.1) Bipolar I disorder manic episodes (1.2) Bipolar disorder, depressive episodes (1.2).</IndicationAndUsage>
<Description>Quetiapine fumarate USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water.Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach, one side debossed with “F71”), 50 mg (round, white, one side debossed with “F72”), 100 mg (round, yellow one side debossed with “F73”), 200 mg (round, white, one side debossed with "F75”), 300 mg (capsule-shaped, white, one side debossed with "F76”), and 400 mg (capsule-shaped, yellow, one side debossed with “F77”) tablets.Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, colloidal silicon di-oxide, hypromellose, polyethylene glycol, and titanium dioxide.The 25 mg tablets contain red ferric oxide and yellow ferric oxide and the 100 mg and 400 mg tablets contain only yellow ferric oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.39 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.51 mg of quetiapine fumarate equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>33342-105-15</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (33342-105-15) </PackageDescription>
<NDC11Code>33342-0105-15</NDC11Code>
<ProductNDC>33342-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203359</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: Schizophrenia (1.1) Bipolar I disorder manic episodes (1.2) Bipolar disorder, depressive episodes (1.2).</IndicationAndUsage>
<Description>Quetiapine fumarate USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water.Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach, one side debossed with “F71”), 50 mg (round, white, one side debossed with “F72”), 100 mg (round, yellow one side debossed with “F73”), 200 mg (round, white, one side debossed with "F75”), 300 mg (capsule-shaped, white, one side debossed with "F76”), and 400 mg (capsule-shaped, yellow, one side debossed with “F77”) tablets.Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, colloidal silicon di-oxide, hypromellose, polyethylene glycol, and titanium dioxide.The 25 mg tablets contain red ferric oxide and yellow ferric oxide and the 100 mg and 400 mg tablets contain only yellow ferric oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.39 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.51 mg of quetiapine fumarate equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>33342-105-39</NDCCode>
<PackageDescription>9 BLISTER PACK in 1 CARTON (33342-105-39) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0105-39</NDC11Code>
<ProductNDC>33342-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203359</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160614</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Quetiapine tablets are an atypical antipsychotic indicated for the treatment of: Schizophrenia (1.1) Bipolar I disorder manic episodes (1.2) Bipolar disorder, depressive episodes (1.2).</IndicationAndUsage>
<Description>Quetiapine fumarate USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate USP is a white to off-white crystalline powder which is moderately soluble in water.Quetiapine tablets USP are supplied for oral administration as 25 mg (round, peach, one side debossed with “F71”), 50 mg (round, white, one side debossed with “F72”), 100 mg (round, yellow one side debossed with “F73”), 200 mg (round, white, one side debossed with "F75”), 300 mg (capsule-shaped, white, one side debossed with "F76”), and 400 mg (capsule-shaped, yellow, one side debossed with “F77”) tablets.Inactive ingredients are povidone, dibasic calcium phosphate dihydrate, microcrystalline cellulose, sodium starch glycolate, lactose monohydrate, magnesium stearate, colloidal silicon di-oxide, hypromellose, polyethylene glycol, and titanium dioxide.The 25 mg tablets contain red ferric oxide and yellow ferric oxide and the 100 mg and 400 mg tablets contain only yellow ferric oxide. Each 25 mg tablet contains 28.78 mg of quetiapine fumarate equivalent to 25 mg quetiapine. Each 50 mg tablet contains 57.56 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 100 mg tablet contains 115.13 mg of quetiapine fumarate equivalent to 100 mg quetiapine. Each 200 mg tablet contains 230.26 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345.39 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 460.51 mg of quetiapine fumarate equivalent to 400 mg quetiapine.</Description>
</NDC>
<NDC>
<NDCCode>43251-3213-3</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (43251-3213-3) > 56 g in 1 TUBE</PackageDescription>
<NDC11Code>43251-3213-03</NDC11Code>
<ProductNDC>43251-3213</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Natralia Cramp Relief</ProprietaryName>
<NonProprietaryName>Methyl Salicylate</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Laderma Trading Pty Ltd</LabelerName>
<SubstanceName>METHYL SALICYLATE</SubstanceName>
<StrengthNumber>105</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the temporary relief of minor aches and pains of muscles and joints associated with simple backache, arthritis, strains, bruises and sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69639-105-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (69639-105-01) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>69639-0105-01</NDC11Code>
<ProductNDC>69639-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Akynzeo</ProprietaryName>
<NonProprietaryName>Fosnetupitant And Palonosetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200615</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210493</ApplicationNumber>
<LabelerName>Helsinn Therapeutics (U.S.), Inc.</LabelerName>
<SubstanceName>FOSNETUPITANT; PALONOSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>260; .28</StrengthNumber>
<StrengthUnit>mg/20mL; mg/20mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AKYNZEO capsules is indicated in combination with dexamethasone in adults for the prevention of acute and delayed nausea and vomiting associated with initial and repeat courses of cancer chemotherapy, including, but not limited to, highly emetogenic chemotherapy. AKYNZEO capsules is a combination of palonosetron and netupitant: palonosetron prevents nausea and vomiting during the acute phase and netupitant prevents nausea and vomiting during both the acute and delayed phase after cancer chemotherapy. AKYNZEO for injection and AKYNZEO injection are indicated in combination with dexamethasone in adults for the prevention of acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy. AKYNZEO for injection is a combination of palonosetron and fosnetupitant, a prodrug of netupitant: palonosetron prevents nausea and vomiting during the acute phase and fosnetupitant prevents nausea and vomiting during both the acute and delayed phase after cancer chemotherapy. Limitations of Use AKYNZEO for injection and AKYNZEO injection have not been studied for the prevention of nausea and vomiting associated with anthracycline plus cyclophosphamide chemotherapy.</IndicationAndUsage>
<Description>AKYNZEO (300 mg netupitant/0.5 mg palonosetron) capsules are an oral combination product of netupitant, a substance P/neurokinin 1 (NK-1) receptor antagonist, and palonosetron hydrochloride, a serotonin-3 (5-HT3) receptor antagonist. Both netupitant and palonosetron hydrochloride are anti-nausea and anti-emetic agents. Netupitant is chemically described: 2-[3,5-bis(trifluoromethyl)phenyl]-N, 2 dimethyl-N-[4-(2-methylphenyl)-6-(4-methylpiperazin-1-yl)pyridin-3-yl] propanamide. The empirical formula is C30H32F6N4O, with a molecular weight of 578.61. Netupitant exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is chemically described: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1H-benz[de]isoquinoline hydrochloride. The empirical formula is C19H24N2O.HCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Netupitant is white to off-white crystalline powder. It is freely soluble in toluene and acetone, soluble in isopropanol and ethanol, and very slightly soluble in water. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Each AKYNZEO capsule is composed of one white-caramel hard gelatin capsule which contains three tablets each containing 100 mg netupitant and one gelatin capsule containing 0.5 mg palonosetron (equivalent to 0.56 mg palonosetron hydrochloride). The inactive ingredients are butylated hydroxyanisole (BHA), croscarmellose sodium, gelatin, glycerin, magnesium stearate, microcrystalline cellulose, mono- and di-glycerides of capryl/capric acid, polyglyceryl dioleate, povidone K-30, purified water, red iron oxide, silicon dioxide, sodium stearyl fumarate, sorbitol, sucrose fatty acid esters, titanium dioxide and yellow iron oxide. It may contain traces of medium-chain triglycerides, lecithin, and denatured ethanol. AKYNZEO (235 mg fosnetupitant/0.25 mg palonosetron) for injection is a combination product of fosnetupitant, a prodrug of netupitant, which is a substance P/neurokinin 1 (NK-1) receptor antagonist, and palonosetron hydrochloride, a serotonin-3 (5-HT3) receptor antagonist. Fosnetupitant chloride hydrochloride is chemically described as 2-(3,5-bis-trifluoromethylphenyl)-N-methyl-N-[6-(4-methyl-4-O-methylene-phosphatepiperazinium-1-yl)-4-o-tolyl-pyridin-3-yl]-isobutyramide chloride hydrochloride. The empirical formula is C31H36F6N4O5PClHCl, with a molecular weight of 761.53. Fosnetupitant chloride hydrochloride exists as a single isomer and has the following structural formula. Fosnetupitant chloride hydrochloride is white to off-white to yellowish solid or powder. Its solubility is pH dependent: at acidic pH (pH 2), its solubility is 1.4 mg/mL; at basic pH (pH 10), its solubility is 11.5 mg/mL. Palonosetron hydrochloride is described above in this section. AKYNZEO for injection is available for intravenous infusion supplied as a sterile lyophilized powder. Each vial of AKYNZEO for injection contains 235 mg of fosnetupitant (equivalent to 260 mg fosnetupitant chloride hydrochloride) and 0.25 mg of palonosetron (equivalent to 0.28 mg of palonosetron hydrochloride). The inactive ingredients are edetate disodium (6.4 mg), mannitol (760 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment). AKYNZEO injection is available for intravenous infusion supplied as a sterile solution in a single-dose vial. Each vial of AKYNZEO injection contains 235 mg of fosnetupitant (equivalent to 260 mg fosnetupitant chloride hydrochloride) and 0.25 mg of palonosetron (equivalent to 0.28 mg of palonosetron hydrochloride). The inactive ingredients are edetate disodium (3.2 mg), mannitol (760 mg), water for injection, sodium hydroxide and/or hydrochloric acid (for pH adjustment).</Description>
</NDC>
<NDC>
<NDCCode>79950-016-01</NDCCode>
<PackageDescription>1 CAN in 1 CARTON (79950-016-01) / 60 g in 1 CAN</PackageDescription>
<NDC11Code>79950-0016-01</NDC11Code>
<ProductNDC>79950-016</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bondi Sands Spf 60 Sunny Spritz Face Mist</ProprietaryName>
<NonProprietaryName>Homosalate, Octocrylene, Octisalate, Avobenzone</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250106</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>BONDI SANDS (USA) INC.</LabelerName>
<SubstanceName>OCTISALATE; OCTOCRYLENE; AVOBENZONE; HOMOSALATE</SubstanceName>
<StrengthNumber>35; 56; 30; 105</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>79950-022-01</NDCCode>
<PackageDescription>1 CAN in 1 CARTON (79950-022-01) / 60 g in 1 CAN</PackageDescription>
<NDC11Code>79950-0022-01</NDC11Code>
<ProductNDC>79950-022</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bondi Sands Fragrance Free Face Spf 50 Sunscreen Mist</ProprietaryName>
<NonProprietaryName>Homosalate, Octocrylene, Octisalate, Avobenzone</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250210</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>BONDI SANDS (USA) INC.</LabelerName>
<SubstanceName>OCTOCRYLENE; AVOBENZONE; HOMOSALATE; OCTISALATE</SubstanceName>
<StrengthNumber>56; 30; 105; 35</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70882-101-28</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BLISTER PACK (70882-101-28)</PackageDescription>
<NDC11Code>70882-0101-28</NDC11Code>
<ProductNDC>70882-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19840911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062505</ApplicationNumber>
<LabelerName>Cambridge Therapeutics Technologies, LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of Doxycycline Hyclate Tablets and other antibacterial drugs, Doxycycline Hyclate Tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline is an antibacterial drug synthetically derived from oxytetracycline, and is available as Doxycycline Hyclate Tablets and Capsules for oral administration. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8∙H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8∙HCl)2∙C2H6O∙H2O and the molecular weight is 1025.89. Doxycycline is a light-yellow crystalline powder. Doxycycline hyclate is soluble in water, while doxycycline monohydrate is very slightly soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet, for oral administration, contains doxycycline Hyclate equivalent to 100 mg doxycycline. In addition, each tablet contains the following inactive ingredients; anhydrous lactose, colloidal silicon dioxide, FD&C Red No. 40, FD&C Yellow No. 6, hypromellose, magnesium stearate, methylcellulose, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, stearic acid, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70882-102-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70882-102-30)</PackageDescription>
<NDC11Code>70882-0102-30</NDC11Code>
<ProductNDC>70882-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077575</ApplicationNumber>
<LabelerName>Cambridge Therapeutics Technologies, LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets are a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca and its molecular weight is 1155.38. Its structural formula is. Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: carboxymethylcellulose sodium, ferric oxide yellow, glycerin, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, talc, tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>70882-103-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (70882-103-30)</PackageDescription>
<NDC11Code>70882-0103-30</NDC11Code>
<ProductNDC>70882-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075994</ApplicationNumber>
<LabelerName>Cambridge Therapeutics Technologies, LLC</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-07</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablets are an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5 2H2O and its structural formula is. Lisinopril, USP is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, for oral administration, are supplied as 5 mg, 10 mg, and 20 mg tablets. Inactive Ingredients. 5 mg and 10 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide. 20 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide, yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70882-104-30</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (70882-104-30)</PackageDescription>
<NDC11Code>70882-0104-30</NDC11Code>
<ProductNDC>70882-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075994</ApplicationNumber>
<LabelerName>Cambridge Therapeutics Technologies, LLC</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-07</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablets are an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5 2H2O and its structural formula is. Lisinopril, USP is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, for oral administration, are supplied as 5 mg, 10 mg, and 20 mg tablets. Inactive Ingredients. 5 mg and 10 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide. 20 mg tablets – dibasic calcium phosphate, magnesium stearate, mannitol, corn starch, red iron oxide, yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>70882-106-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70882-106-30)</PackageDescription>
<NDC11Code>70882-0106-30</NDC11Code>
<ProductNDC>70882-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077575</ApplicationNumber>
<LabelerName>Cambridge Therapeutics Technologies, LLC</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
<Description>Atorvastatin calcium tablets are a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). The molecular formula of atorvastatin calcium is (C33H34 FN2O5)2Ca and its molecular weight is 1155.38. Its structural formula is. Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is very slightly soluble in distilled water, pH 7.4 phosphate buffer, and acetonitrile; slightly soluble in ethanol; and freely soluble in methanol. Atorvastatin calcium tablets for oral administration contain 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: carboxymethylcellulose sodium, ferric oxide yellow, glycerin, magnesium stearate, pregelatinized starch, silicified microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, talc, tromethamine.</Description>
</NDC>
</NDCList>