{
"NDC": [
{
"NDCCode": "70934-053-94",
"PackageDescription": "30 TABLET, FILM COATED in 1 DOSE PACK (70934-053-94) ",
"NDC11Code": "70934-0053-94",
"ProductNDC": "70934-053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091569",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "500; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20171220",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets and other antibacterial drugs, amoxicillin and clavulanate potassium tablets should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets are a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*:.",
"Description": "Amoxicillin and clavulanate potassium tablets, USP are an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2 S,5 R,6 R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium ( Z)( 2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as:. Each film coated tablet for oral administration contains 250 mg, 500 mg or 875 mg amoxicillin USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each amoxicillin and clavulanate potassium tablet 250 mg/125 mg, 500 mg/125 mg or 875 mg/125 mg contains 0.63 mEq potassium. Inactive Ingredients: Colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, surelease clear (aqueous ethyl cellulose dispersion), and titanium dioxide."
},
{
"NDCCode": "70934-053-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70934-053-14) ",
"NDC11Code": "70934-0053-14",
"ProductNDC": "70934-053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091569",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "500; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20191014",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets and other antibacterial drugs, amoxicillin and clavulanate potassium tablets should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets are a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*:.",
"Description": "Amoxicillin and clavulanate potassium tablets, USP are an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2 S,5 R,6 R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium ( Z)( 2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as:. Each film coated tablet for oral administration contains 250 mg, 500 mg or 875 mg amoxicillin USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each amoxicillin and clavulanate potassium tablet 250 mg/125 mg, 500 mg/125 mg or 875 mg/125 mg contains 0.63 mEq potassium. Inactive Ingredients: Colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, surelease clear (aqueous ethyl cellulose dispersion), and titanium dioxide."
},
{
"NDCCode": "70934-033-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-033-94) ",
"NDC11Code": "70934-0033-94",
"ProductNDC": "70934-033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065271",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20171031",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).",
"Description": "Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin USP as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "70934-034-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-034-94) ",
"NDC11Code": "70934-0034-94",
"ProductNDC": "70934-034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170727",
"EndMarketingDate": "20200731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065248",
"LabelerName": "Denton Pharma, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20171023",
"EndMarketingDatePackage": "20200731",
"SamplePackage": "N"
},
{
"NDCCode": "70934-035-94",
"PackageDescription": "30 TABLET, FILM COATED in 1 DOSE PACK (70934-035-94) ",
"NDC11Code": "70934-0035-94",
"ProductNDC": "70934-035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065435",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals.",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20171023",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium and other antibacterial drugs, penicillin V potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriologic studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia)Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections Mild to moderately severe infections of the respiratory tract. Staphylococcal infections – penicillin G-sensitive Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis)Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract 1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association 1.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V potassium tablets, for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units). The 250 mg tablet is equivalent to 250 mg (400,000 units) penicillin V and the 500 mg tablet is equivalent to 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: povidone, microcrystalline cellulose, talc, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "70934-037-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-037-94) ",
"NDC11Code": "70934-0037-94",
"ProductNDC": "70934-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065248",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20171031",
"SamplePackage": "N"
},
{
"NDCCode": "70934-038-94",
"PackageDescription": "30 TABLET, FILM COATED in 1 DOSE PACK (70934-038-94) ",
"NDC11Code": "70934-0038-94",
"ProductNDC": "70934-038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171031",
"EndMarketingDate": "20250731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20171031",
"EndMarketingDatePackage": "20250731",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin tablets are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 to 1.4) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. ( 1.5) .",
"Description": "Formulation of amoxicillin tablets, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S.3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "70934-039-94",
"PackageDescription": "30 TABLET, FILM COATED in 1 DOSE PACK (70934-039-94) ",
"NDC11Code": "70934-0039-94",
"ProductNDC": "70934-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171023",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091568",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "875; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20171023",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets and other antibacterial drugs, amoxicillin and clavulanate potassium tablets should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets are a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*:.",
"Description": "Amoxicillin and clavulanate potassium tablets, USP are an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2 S,5 R,6 R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium ( Z)( 2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as:. Each film coated tablet for oral administration contains 250 mg, 500 mg or 875 mg amoxicillin USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each amoxicillin and clavulanate potassium tablet 250 mg/125 mg, 500 mg/125 mg or 875 mg/125 mg contains 0.63 mEq potassium. Inactive Ingredients: Colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, surelease clear (aqueous ethyl cellulose dispersion), and titanium dioxide."
},
{
"NDCCode": "70934-040-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-040-94) ",
"NDC11Code": "70934-0040-94",
"ProductNDC": "70934-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171030",
"EndMarketingDate": "20250731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090836",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180122",
"EndMarketingDatePackage": "20250731",
"SamplePackage": "N",
"IndicationAndUsage": "Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).",
"Description": "Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg."
},
{
"NDCCode": "70934-054-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-054-94) ",
"NDC11Code": "70934-0054-94",
"ProductNDC": "70934-054",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064076",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180118",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin is a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 – 1.4) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. ( 1.5) .",
"Description": "Formulations of amoxicillin contain amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum."
},
{
"NDCCode": "70934-056-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-056-94) ",
"NDC11Code": "70934-0056-94",
"ProductNDC": "70934-056",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefadroxil",
"NonProprietaryName": "Cefadroxil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065352",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CEFADROXIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20171228",
"SamplePackage": "N"
},
{
"NDCCode": "70934-057-94",
"PackageDescription": "30 TABLET, FILM COATED in 1 DOSE PACK (70934-057-94) ",
"NDC11Code": "70934-0057-94",
"ProductNDC": "70934-057",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205707",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "500; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180504",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets USP, and other antibacterial drugs, amoxicillin and clavulanate potassium should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets USP is a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*.",
"Description": "Amoxicillin and clavulanate potassium tablets, USP is an oral antibacterial combination consisting of amoxicillin and the β-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. Chemically, amoxicillin, USP is ( 2S, 5R, 6R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. C 16H 19N 3O 5S3H 2O M.W. 419.45 Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium, USP is potassium ( Z)-(2 R,5 R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as:. C 8H 8KNO 5 M.W. 237.25 Each tablet contains 250 mg, 500 mg or 875 mg amoxicillin, USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP contains 0.63 mEq potassium. Inactive Ingredients: colloidal silicon dioxide, ethylcellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 1."
},
{
"NDCCode": "70934-064-94",
"PackageDescription": "30 TABLET, FILM COATED in 1 DOSE PACK (70934-064-94) ",
"NDC11Code": "70934-0064-94",
"ProductNDC": "70934-064",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180221",
"EndMarketingDate": "20240930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180307",
"EndMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin tablets are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 to 1.4) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. ( 1.5) .",
"Description": "Formulation of amoxicillin tablets, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S●3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "70934-065-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-065-94) ",
"NDC11Code": "70934-0065-94",
"ProductNDC": "70934-065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065229",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180118",
"SamplePackage": "N",
"IndicationAndUsage": "Cephalexin capsules USP is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria: : 1 Respiratory tract infection ( 1.1) , 2 Otitis media ( 1.2) , 3 Skin and skin structure infections ( 1.3) , 4 Bone infections ( 1.4) , 5 Genitourinary tract infections ( 1.5) .",
"Description": "Cephalexin capsules USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7- (D-a-Amino-a-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula. Each capsule contains cephalexin USP equivalent to 250 mg, or 500 mg of anhydrous cephalexin. The capsules also contain the following inactive ingredients D&C Yellow 10, FD&C Blue 1, FD&C Green 3, FD&C Yellow 6, ferric oxide black, gelatin, magnesium stearate, microcrystalline cellulose, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "70934-081-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-081-94) ",
"NDC11Code": "70934-0081-94",
"ProductNDC": "70934-081",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefadroxil",
"NonProprietaryName": "Cefadroxil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065392",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CEFADROXIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180214",
"SamplePackage": "N",
"IndicationAndUsage": "Cefadroxil Capsules USP are indicated for the treatment of patients with infection caused by susceptible strains of the designated organisms in the following diseases. Urinary tract infections caused by E. coli, P. mirabilis, and Klebsiella species. Skin and skin structure infections caused by staphylococci and/or streptococci. Pharyngitis and/or tonsillitis caused by Streptococcus pyogenes (Group A beta-hemolytic streptococci). Note: Only penicillin by the intramuscular route of administration has been shown to be effective in the prophylaxis of rheumatic fever. Cefadroxil monohydrate is generally effective in the eradication of streptococci from the oropharynx. However, data establishing the efficacy of cefadroxil monohydrate for the prophylaxis of subsequent rheumatic fever are not available. Note: Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefadroxil capsules and other antibacterial drugs, cefadroxil capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cefadroxil monohydrate is a semisynthetic cephalosporin antibiotic intended for oral administration. It is a white to yellowish-white crystalline powder. It is soluble in water and it is acid-stable. It is chemically designated as 5-Thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7-[[amino(4-hydroxyphenyl)acetyl]amino]-3-methyl-8-oxo-, monohydrate, [6R-[6α,7β(R*)]]-. It has the formula C 16H 17N 3O 5SH 2O and the molecular weight of 381.40. It has the following structural formula:. Each capsule contains cefadroxil monohydrate USP equivalent to 500 mg of cefadroxil. In addition, each capsule also contains the following inactive ingredients: crospovidone, D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, ferric oxide black, gelatin, magnesium stearate, microcrystalline cellulose, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "70934-082-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-082-94) ",
"NDC11Code": "70934-0082-94",
"ProductNDC": "70934-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065229",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20180305",
"SamplePackage": "N"
},
{
"NDCCode": "70934-110-94",
"PackageDescription": "30 TABLET, FILM COATED in 1 DOSE PACK (70934-110-94) ",
"NDC11Code": "70934-0110-94",
"ProductNDC": "70934-110",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204755",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "875; 125",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180507",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets USP, and other antibacterial drugs, amoxicillin and clavulanate potassium should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets USP is a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*.",
"Description": "Amoxicillin and clavulanate potassium tablets, USP is an oral antibacterial combination consisting of amoxicillin and the β-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. Chemically, amoxicillin, USP is ( 2S, 5R, 6R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. C 16H 19N 3O 5S3H 2O M.W. 419.45 Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium, USP is potassium ( Z)-(2 R,5 R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as:. C 8H 8KNO 5 M.W. 237.25 Each tablet contains 250 mg, 500 mg or 875 mg amoxicillin, USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP contains 0.63 mEq potassium. Inactive Ingredients: colloidal silicon dioxide, ethylcellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 1."
},
{
"NDCCode": "70934-154-94",
"PackageDescription": "30 CAPSULE in 1 DOSE PACK (70934-154-94) ",
"NDC11Code": "70934-0154-94",
"ProductNDC": "70934-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180820",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065271",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210820",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).",
"Description": "Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin USP as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "42908-053-00",
"PackageDescription": "1 BOTTLE, GLASS in 1 BOX (42908-053-00) > 30 mL in 1 BOTTLE, GLASS",
"NDC11Code": "42908-0053-00",
"ProductNDC": "42908-053",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Paul And Joe",
"ProprietaryNameSuffix": "Protective Fluid Foundation S 102",
"NonProprietaryName": "Octinoxate And Titanium Dioxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110301",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Albion Co., Ltd.",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "1.5; 2.94",
"StrengthUnit": "g/30mL; g/30mL",
"Status": "Deprecated",
"LastUpdate": "2014-03-05"
},
{
"NDCCode": "43419-053-31",
"PackageDescription": "2 CONTAINER in 1 CARTON (43419-053-31) > 15 g in 1 CONTAINER",
"NDC11Code": "43419-0053-31",
"ProductNDC": "43419-053",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sulwhasoo Perfecting Cushion No.25",
"NonProprietaryName": "Octinoxate, Titanium Dioxide, And Zinc Oxide",
"DosageFormName": "SPONGE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150902",
"EndMarketingDate": "20210531",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Amorepacific Corporation",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "2.1; 1.245; 2.94",
"StrengthUnit": "g/30g; g/30g; g/30g",
"Status": "Deprecated",
"LastUpdate": "2021-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20181105",
"EndMarketingDatePackage": "20210531",
"SamplePackage": "N"
},
{
"NDCCode": "70934-097-20",
"PackageDescription": "20 CAPSULE in 1 BOTTLE, PLASTIC (70934-097-20) ",
"NDC11Code": "70934-0097-20",
"ProductNDC": "70934-097",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20180405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA063066",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20180405",
"SamplePackage": "N",
"IndicationAndUsage": "Minocycline hydrochloride capsules USP are indicated in the treatment of the following infections due to susceptible strains of the designated microorganisms: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox and tick fevers caused by rickettsiae , 2 Respiratory tract infections caused by Mycoplasma pneumoniae, 3 Lymphogranuloma venereum caused by Chlamydia trachomatis, 4 Psittacosis (Ornithosis) due to Chlamydia psittaci, 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence , 6 Inclusion conjunctivitis caused by Chlamydia trachomatis, 7 Nongonococcal urethritis, endocervical, or rectal infections in adults caused by Ureaplasma urealyticum or Chlamydia trachomatis, 8 Relapsing fever due to Borrelia recurrentis, 9 Chancroid caused by Haemophilus ducreyi, 10 Plague due to Yersinia pestis, 11 Tularemia due to Francisella tularensis, 12 Cholera caused by Vibrio cholerae, 13 Campylobacter fetus infections caused by Campylobacter fetusBrucellosis due to Brucella species (in conjunction with streptomycin) , 14 Bartonellosis due to Bartonella bacilliformis, 15 Granuloma inguinale caused by Calymmatobacterium granulomatis, 16 .",
"Description": "Minocycline hydrochloride, a semisynthetic derivative of tetracycline, 4,7-Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. The structural formula is represented below. C 23H 27N 3O 7HCl M. W. 493.94. Each minocycline hydrochloride capsule, for oral administration, contains the equivalent of 50 mg, 75 mg or 100 mg of minocycline hydrochloride. In addition each capsule contains the following inactive ingredients: magnesium stearate and starch (corn). The 50 mg, 75 mg and 100 mg capsule shells contain: gelatin, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The 75 mg and 100 mg capsule shells also contain: black iron oxide."
},
{
"NDCCode": "0270-1315-45",
"PackageDescription": "10 BOTTLE in 1 BOX (0270-1315-45) / 200 mL in 1 BOTTLE",
"NDC11Code": "00270-1315-45",
"ProductNDC": "0270-1315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue",
"ProprietaryNameSuffix": "300",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20140620",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020327",
"LabelerName": "Bracco Diagnostics Inc",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "612",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140620",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine."
},
{
"NDCCode": "0270-1315-95",
"PackageDescription": "6 BOTTLE in 1 BOX (0270-1315-95) / 500 mL in 1 BOTTLE",
"NDC11Code": "00270-1315-95",
"ProductNDC": "0270-1315",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue",
"ProprietaryNameSuffix": "300",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20140620",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020327",
"LabelerName": "Bracco Diagnostics Inc",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "612",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140620",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine."
},
{
"NDCCode": "0270-1316-45",
"PackageDescription": "10 BOTTLE in 1 BOX (0270-1316-45) / 200 mL in 1 BOTTLE",
"NDC11Code": "00270-1316-45",
"ProductNDC": "0270-1316",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue",
"ProprietaryNameSuffix": "370",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20140620",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020327",
"LabelerName": "Bracco Diagnostics Inc",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "755",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140620",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine."
},
{
"NDCCode": "0270-1316-52",
"PackageDescription": "10 BOTTLE in 1 BOX (0270-1316-52) / 75 mL in 1 BOTTLE",
"NDC11Code": "00270-1316-52",
"ProductNDC": "0270-1316",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue",
"ProprietaryNameSuffix": "370",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "19851231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018735",
"LabelerName": "BRACCO DIAGNOSTICS INC",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "755",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19851231",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE is a radiographic contrast agent indicated for. Intra-arterial Procedures † (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5- lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 ISOVUE 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 ISOVUE 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine."
},
{
"NDCCode": "0270-1316-95",
"PackageDescription": "6 BOTTLE in 1 BOX (0270-1316-95) / 500 mL in 1 BOTTLE",
"NDC11Code": "00270-1316-95",
"ProductNDC": "0270-1316",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isovue",
"ProprietaryNameSuffix": "370",
"NonProprietaryName": "Iopamidol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20140620",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020327",
"LabelerName": "Bracco Diagnostics Inc",
"SubstanceName": "IOPAMIDOL",
"StrengthNumber": "755",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140620",
"SamplePackage": "N",
"IndicationAndUsage": "ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.",
"Description": "ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine."
},
{
"NDCCode": "0378-0630-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0630-01) ",
"NDC11Code": "00378-0630-01",
"ProductNDC": "0378-0630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0630-88",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0378-0630-88) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00378-0630-88",
"ProductNDC": "0378-0630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0630-91",
"PackageDescription": "60 TABLET in 1 BOTTLE (0378-0630-91) ",
"NDC11Code": "00378-0630-91",
"ProductNDC": "0378-0630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0631-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0631-01) ",
"NDC11Code": "00378-0631-01",
"ProductNDC": "0378-0631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>70934-053-94</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 DOSE PACK (70934-053-94) </PackageDescription>
<NDC11Code>70934-0053-94</NDC11Code>
<ProductNDC>70934-053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091569</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>500; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets and other antibacterial drugs, amoxicillin and clavulanate potassium tablets should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets are a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*:.</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium tablets, USP are an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2 S,5 R,6 R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium ( Z)( 2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as:. Each film coated tablet for oral administration contains 250 mg, 500 mg or 875 mg amoxicillin USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each amoxicillin and clavulanate potassium tablet 250 mg/125 mg, 500 mg/125 mg or 875 mg/125 mg contains 0.63 mEq potassium. Inactive Ingredients: Colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, surelease clear (aqueous ethyl cellulose dispersion), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-053-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70934-053-14) </PackageDescription>
<NDC11Code>70934-0053-14</NDC11Code>
<ProductNDC>70934-053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091569</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>500; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets and other antibacterial drugs, amoxicillin and clavulanate potassium tablets should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets are a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*:.</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium tablets, USP are an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2 S,5 R,6 R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium ( Z)( 2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as:. Each film coated tablet for oral administration contains 250 mg, 500 mg or 875 mg amoxicillin USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each amoxicillin and clavulanate potassium tablet 250 mg/125 mg, 500 mg/125 mg or 875 mg/125 mg contains 0.63 mEq potassium. Inactive Ingredients: Colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, surelease clear (aqueous ethyl cellulose dispersion), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-033-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-033-94) </PackageDescription>
<NDC11Code>70934-0033-94</NDC11Code>
<ProductNDC>70934-033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065271</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).</IndicationAndUsage>
<Description>Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin USP as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>70934-034-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-034-94) </PackageDescription>
<NDC11Code>70934-0034-94</NDC11Code>
<ProductNDC>70934-034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170727</StartMarketingDate>
<EndMarketingDate>20200731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065248</ApplicationNumber>
<LabelerName>Denton Pharma, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20171023</StartMarketingDatePackage>
<EndMarketingDatePackage>20200731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70934-035-94</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 DOSE PACK (70934-035-94) </PackageDescription>
<NDC11Code>70934-0035-94</NDC11Code>
<ProductNDC>70934-035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065435</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals.</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium and other antibacterial drugs, penicillin V potassium should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriologic studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal Infections (without bacteremia)Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal Infections Mild to moderately severe infections of the respiratory tract. Staphylococcal infections – penicillin G-sensitive Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent’s gingivitis and pharyngitis)Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis: For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract 1. Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association 1.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Penicillin V potassium tablets, for oral administration, contain 250 mg (400,000 units) or 500 mg (800,000 units). The 250 mg tablet is equivalent to 250 mg (400,000 units) penicillin V and the 500 mg tablet is equivalent to 500 mg (800,000 units) penicillin V. In addition, each tablet contains the following inactive ingredients: povidone, microcrystalline cellulose, talc, colloidal silicon dioxide, magnesium stearate, hypromellose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-037-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-037-94) </PackageDescription>
<NDC11Code>70934-0037-94</NDC11Code>
<ProductNDC>70934-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065248</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70934-038-94</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 DOSE PACK (70934-038-94) </PackageDescription>
<NDC11Code>70934-0038-94</NDC11Code>
<ProductNDC>70934-038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171031</StartMarketingDate>
<EndMarketingDate>20250731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20171031</StartMarketingDatePackage>
<EndMarketingDatePackage>20250731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin tablets are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 to 1.4) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. ( 1.5) .</IndicationAndUsage>
<Description>Formulation of amoxicillin tablets, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S.3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-039-94</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 DOSE PACK (70934-039-94) </PackageDescription>
<NDC11Code>70934-0039-94</NDC11Code>
<ProductNDC>70934-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171023</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091568</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>875; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets and other antibacterial drugs, amoxicillin and clavulanate potassium tablets should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets are a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*:.</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium tablets, USP are an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2 S,5 R,6 R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium ( Z)( 2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as:. Each film coated tablet for oral administration contains 250 mg, 500 mg or 875 mg amoxicillin USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each amoxicillin and clavulanate potassium tablet 250 mg/125 mg, 500 mg/125 mg or 875 mg/125 mg contains 0.63 mEq potassium. Inactive Ingredients: Colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, surelease clear (aqueous ethyl cellulose dispersion), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-040-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-040-94) </PackageDescription>
<NDC11Code>70934-0040-94</NDC11Code>
<ProductNDC>70934-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171030</StartMarketingDate>
<EndMarketingDate>20250731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090836</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180122</StartMarketingDatePackage>
<EndMarketingDatePackage>20250731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
<Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
</NDC>
<NDC>
<NDCCode>70934-054-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-054-94) </PackageDescription>
<NDC11Code>70934-0054-94</NDC11Code>
<ProductNDC>70934-054</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064076</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin is a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 – 1.4) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. ( 1.5) .</IndicationAndUsage>
<Description>Formulations of amoxicillin contain amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum.</Description>
</NDC>
<NDC>
<NDCCode>70934-056-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-056-94) </PackageDescription>
<NDC11Code>70934-0056-94</NDC11Code>
<ProductNDC>70934-056</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefadroxil</ProprietaryName>
<NonProprietaryName>Cefadroxil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065352</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CEFADROXIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70934-057-94</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 DOSE PACK (70934-057-94) </PackageDescription>
<NDC11Code>70934-0057-94</NDC11Code>
<ProductNDC>70934-057</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205707</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>500; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets USP, and other antibacterial drugs, amoxicillin and clavulanate potassium should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets USP is a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*.</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium tablets, USP is an oral antibacterial combination consisting of amoxicillin and the β-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. Chemically, amoxicillin, USP is ( 2S, 5R, 6R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. C 16H 19N 3O 5S3H 2O M.W. 419.45 Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium, USP is potassium ( Z)-(2 R,5 R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as:. C 8H 8KNO 5 M.W. 237.25 Each tablet contains 250 mg, 500 mg or 875 mg amoxicillin, USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP contains 0.63 mEq potassium. Inactive Ingredients: colloidal silicon dioxide, ethylcellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>70934-064-94</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 DOSE PACK (70934-064-94) </PackageDescription>
<NDC11Code>70934-0064-94</NDC11Code>
<ProductNDC>70934-064</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180221</StartMarketingDate>
<EndMarketingDate>20240930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180307</StartMarketingDatePackage>
<EndMarketingDatePackage>20240930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin tablets are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 to 1.4) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. ( 1.5) .</IndicationAndUsage>
<Description>Formulation of amoxicillin tablets, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S●3H 2O, and the molecular weight is 419.45. Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-065-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-065-94) </PackageDescription>
<NDC11Code>70934-0065-94</NDC11Code>
<ProductNDC>70934-065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065229</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cephalexin capsules USP is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria: : 1 Respiratory tract infection ( 1.1) , 2 Otitis media ( 1.2) , 3 Skin and skin structure infections ( 1.3) , 4 Bone infections ( 1.4) , 5 Genitourinary tract infections ( 1.5) .</IndicationAndUsage>
<Description>Cephalexin capsules USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7- (D-a-Amino-a-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula. Each capsule contains cephalexin USP equivalent to 250 mg, or 500 mg of anhydrous cephalexin. The capsules also contain the following inactive ingredients D&C Yellow 10, FD&C Blue 1, FD&C Green 3, FD&C Yellow 6, ferric oxide black, gelatin, magnesium stearate, microcrystalline cellulose, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-081-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-081-94) </PackageDescription>
<NDC11Code>70934-0081-94</NDC11Code>
<ProductNDC>70934-081</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefadroxil</ProprietaryName>
<NonProprietaryName>Cefadroxil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065392</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CEFADROXIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefadroxil Capsules USP are indicated for the treatment of patients with infection caused by susceptible strains of the designated organisms in the following diseases. Urinary tract infections caused by E. coli, P. mirabilis, and Klebsiella species. Skin and skin structure infections caused by staphylococci and/or streptococci. Pharyngitis and/or tonsillitis caused by Streptococcus pyogenes (Group A beta-hemolytic streptococci). Note: Only penicillin by the intramuscular route of administration has been shown to be effective in the prophylaxis of rheumatic fever. Cefadroxil monohydrate is generally effective in the eradication of streptococci from the oropharynx. However, data establishing the efficacy of cefadroxil monohydrate for the prophylaxis of subsequent rheumatic fever are not available. Note: Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefadroxil capsules and other antibacterial drugs, cefadroxil capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cefadroxil monohydrate is a semisynthetic cephalosporin antibiotic intended for oral administration. It is a white to yellowish-white crystalline powder. It is soluble in water and it is acid-stable. It is chemically designated as 5-Thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7-[[amino(4-hydroxyphenyl)acetyl]amino]-3-methyl-8-oxo-, monohydrate, [6R-[6α,7β(R*)]]-. It has the formula C 16H 17N 3O 5SH 2O and the molecular weight of 381.40. It has the following structural formula:. Each capsule contains cefadroxil monohydrate USP equivalent to 500 mg of cefadroxil. In addition, each capsule also contains the following inactive ingredients: crospovidone, D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, ferric oxide black, gelatin, magnesium stearate, microcrystalline cellulose, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>70934-082-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-082-94) </PackageDescription>
<NDC11Code>70934-0082-94</NDC11Code>
<ProductNDC>70934-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065229</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70934-110-94</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 DOSE PACK (70934-110-94) </PackageDescription>
<NDC11Code>70934-0110-94</NDC11Code>
<ProductNDC>70934-110</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204755</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>875; 125</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium tablets USP, and other antibacterial drugs, amoxicillin and clavulanate potassium should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets USP is a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below*.</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium tablets, USP is an oral antibacterial combination consisting of amoxicillin and the β-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. Chemically, amoxicillin, USP is ( 2S, 5R, 6R)-6-[( R)-(-)-2-Amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as:. C 16H 19N 3O 5S3H 2O M.W. 419.45 Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C 8H 8KNO 5, and the molecular weight is 237.25. Chemically, clavulanate potassium, USP is potassium ( Z)-(2 R,5 R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and may be represented structurally as:. C 8H 8KNO 5 M.W. 237.25 Each tablet contains 250 mg, 500 mg or 875 mg amoxicillin, USP as the trihydrate and 125 mg clavulanic acid as the potassium salt. Each Amoxicillin and Clavulanate Potassium Tablet USP contains 0.63 mEq potassium. Inactive Ingredients: colloidal silicon dioxide, ethylcellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>70934-154-94</NDCCode>
<PackageDescription>30 CAPSULE in 1 DOSE PACK (70934-154-94) </PackageDescription>
<NDC11Code>70934-0154-94</NDC11Code>
<ProductNDC>70934-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180820</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065271</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).</IndicationAndUsage>
<Description>Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin USP as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>42908-053-00</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 BOX (42908-053-00) > 30 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>42908-0053-00</NDC11Code>
<ProductNDC>42908-053</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Paul And Joe</ProprietaryName>
<ProprietaryNameSuffix>Protective Fluid Foundation S 102</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Titanium Dioxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Albion Co., Ltd.</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>1.5; 2.94</StrengthNumber>
<StrengthUnit>g/30mL; g/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-03-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>43419-053-31</NDCCode>
<PackageDescription>2 CONTAINER in 1 CARTON (43419-053-31) > 15 g in 1 CONTAINER</PackageDescription>
<NDC11Code>43419-0053-31</NDC11Code>
<ProductNDC>43419-053</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sulwhasoo Perfecting Cushion No.25</ProprietaryName>
<NonProprietaryName>Octinoxate, Titanium Dioxide, And Zinc Oxide</NonProprietaryName>
<DosageFormName>SPONGE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150902</StartMarketingDate>
<EndMarketingDate>20210531</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Amorepacific Corporation</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>2.1; 1.245; 2.94</StrengthNumber>
<StrengthUnit>g/30g; g/30g; g/30g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20181105</StartMarketingDatePackage>
<EndMarketingDatePackage>20210531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70934-097-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE, PLASTIC (70934-097-20) </PackageDescription>
<NDC11Code>70934-0097-20</NDC11Code>
<ProductNDC>70934-097</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA063066</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Minocycline hydrochloride capsules USP are indicated in the treatment of the following infections due to susceptible strains of the designated microorganisms: 1 Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox and tick fevers caused by rickettsiae , 2 Respiratory tract infections caused by Mycoplasma pneumoniae, 3 Lymphogranuloma venereum caused by Chlamydia trachomatis, 4 Psittacosis (Ornithosis) due to Chlamydia psittaci, 5 Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence , 6 Inclusion conjunctivitis caused by Chlamydia trachomatis, 7 Nongonococcal urethritis, endocervical, or rectal infections in adults caused by Ureaplasma urealyticum or Chlamydia trachomatis, 8 Relapsing fever due to Borrelia recurrentis, 9 Chancroid caused by Haemophilus ducreyi, 10 Plague due to Yersinia pestis, 11 Tularemia due to Francisella tularensis, 12 Cholera caused by Vibrio cholerae, 13 Campylobacter fetus infections caused by Campylobacter fetusBrucellosis due to Brucella species (in conjunction with streptomycin) , 14 Bartonellosis due to Bartonella bacilliformis, 15 Granuloma inguinale caused by Calymmatobacterium granulomatis, 16 .</IndicationAndUsage>
<Description>Minocycline hydrochloride, a semisynthetic derivative of tetracycline, 4,7-Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. The structural formula is represented below. C 23H 27N 3O 7HCl M. W. 493.94. Each minocycline hydrochloride capsule, for oral administration, contains the equivalent of 50 mg, 75 mg or 100 mg of minocycline hydrochloride. In addition each capsule contains the following inactive ingredients: magnesium stearate and starch (corn). The 50 mg, 75 mg and 100 mg capsule shells contain: gelatin, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The 75 mg and 100 mg capsule shells also contain: black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>0270-1315-45</NDCCode>
<PackageDescription>10 BOTTLE in 1 BOX (0270-1315-45) / 200 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00270-1315-45</NDC11Code>
<ProductNDC>0270-1315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue</ProprietaryName>
<ProprietaryNameSuffix>300</ProprietaryNameSuffix>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20140620</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020327</ApplicationNumber>
<LabelerName>Bracco Diagnostics Inc</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>612</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>0270-1315-95</NDCCode>
<PackageDescription>6 BOTTLE in 1 BOX (0270-1315-95) / 500 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00270-1315-95</NDC11Code>
<ProductNDC>0270-1315</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue</ProprietaryName>
<ProprietaryNameSuffix>300</ProprietaryNameSuffix>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20140620</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020327</ApplicationNumber>
<LabelerName>Bracco Diagnostics Inc</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>612</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>0270-1316-45</NDCCode>
<PackageDescription>10 BOTTLE in 1 BOX (0270-1316-45) / 200 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00270-1316-45</NDC11Code>
<ProductNDC>0270-1316</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue</ProprietaryName>
<ProprietaryNameSuffix>370</ProprietaryNameSuffix>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20140620</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020327</ApplicationNumber>
<LabelerName>Bracco Diagnostics Inc</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>755</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>0270-1316-52</NDCCode>
<PackageDescription>10 BOTTLE in 1 BOX (0270-1316-52) / 75 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00270-1316-52</NDC11Code>
<ProductNDC>0270-1316</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue</ProprietaryName>
<ProprietaryNameSuffix>370</ProprietaryNameSuffix>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>19851231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018735</ApplicationNumber>
<LabelerName>BRACCO DIAGNOSTICS INC</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>755</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19851231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for. Intra-arterial Procedures † (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5- lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution available in four concentrations of iodine: 1 ISOVUE 200 mg iodine/mL: Each mL contains 408 mg iopamidol (providing 200 mg organically bound iodine) and the following inactive ingredients: 0.26 mg edetate calcium disodium (providing 0.029 mg (0.001 mEq) sodium) and 1 mg tromethamine., 2 ISOVUE 250 mg iodine/mL: Each mL contains 510 mg iopamidol (providing 250 mg organically bound iodine) and the following inactive ingredients: 0.33 mg edetate calcium disodium (providing 0.036 mg (0.002 mEq) sodium) and 1 mg tromethamine., 3 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg organically bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg (0.002 mEq) sodium) and 1 mg tromethamine., 4 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg organically bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg (0.002 mEq) sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>0270-1316-95</NDCCode>
<PackageDescription>6 BOTTLE in 1 BOX (0270-1316-95) / 500 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00270-1316-95</NDC11Code>
<ProductNDC>0270-1316</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isovue</ProprietaryName>
<ProprietaryNameSuffix>370</ProprietaryNameSuffix>
<NonProprietaryName>Iopamidol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20140620</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020327</ApplicationNumber>
<LabelerName>Bracco Diagnostics Inc</LabelerName>
<SubstanceName>IOPAMIDOL</SubstanceName>
<StrengthNumber>755</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ISOVUE is a radiographic contrast agent indicated for:. Intra-arterial Procedures† (1.1): 1 Cerebral arteriography in adults, 2 Peripheral arteriography in adults, 3 Selective visceral arteriography and aortography in adults, 4 Coronary arteriography and cardiac ventriculography in adults, 5 Angiocardiography in pediatric patients.</IndicationAndUsage>
<Description>ISOVUE (iopamidol) injection is a radiographic contrast agent for intra-arterial or intravenous use. Iopamidol is designated chemically as (S)-N,N’-bis[2-hydroxy-1-(hydroxymethyl)-ethyl]-2,4,6-triiodo-5-lactamidoisophthalamide with a molecular weight of 777.09, an empirical formula of C17H22I3N3O8, and the following structural formula. ISOVUE is a sterile, clear, colorless to pale yellow solution. The ISOVUE Imaging Bulk Package is available in two concentrations of iodine: 1 ISOVUE 300 mg iodine/mL: Each mL contains 612 mg iopamidol (providing 300 mg bound iodine) and the following inactive ingredients: 0.39 mg edetate calcium disodium (providing 0.043 mg sodium) and 1 mg tromethamine., 2 ISOVUE 370 mg iodine/mL: Each mL contains 755 mg iopamidol (providing 370 mg bound iodine) and the following inactive ingredients: 0.48 mg edetate calcium disodium (providing 0.053 mg sodium) and 1 mg tromethamine.</Description>
</NDC>
<NDC>
<NDCCode>0378-0630-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0630-01) </PackageDescription>
<NDC11Code>00378-0630-01</NDC11Code>
<ProductNDC>0378-0630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0630-88</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0630-88) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-0630-88</NDC11Code>
<ProductNDC>0378-0630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0630-91</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (0378-0630-91) </PackageDescription>
<NDC11Code>00378-0630-91</NDC11Code>
<ProductNDC>0378-0630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0631-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0631-01) </PackageDescription>
<NDC11Code>00378-0631-01</NDC11Code>
<ProductNDC>0378-0631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
</NDCList>