{
"NDC": [
{
"NDCCode": "71190-7312-5",
"PackageDescription": "1 BOX in 1 CARTON (71190-7312-5) > 15 g in 1 BOX",
"NDC11Code": "71190-7312-05",
"ProductNDC": "71190-7312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cc Cushion Compact Sunscreen - Fair / Light",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170118",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Skin Pi LLC",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "22.4; .5",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "USES: Help to prevent sunburn. If used as directed with other sun protection measures (see directions) may decrease the risk of skin cancer and early skin ageing caused by the sun."
},
{
"NDCCode": "0904-7312-61",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (0904-7312-61) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "00904-7312-61",
"ProductNDC": "0904-7312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalapril Maleate",
"NonProprietaryName": "Enalapril Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075479",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "ENALAPRIL MALEATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250828",
"SamplePackage": "N",
"IndicationAndUsage": "Hypertension. Enalapril maleate tablets USP are indicated for the treatment of hypertension. Enalapril maleate tablets USP are effective alone or in combination with other antihypertensive agents, especially thiazide- type diuretics. The blood pressure lowering effects of enalapril maleate tablets USP and thiazides are approximately additive. Heart Failure. Enalapril maleate tablets USP are indicated for the treatment of symptomatic congestive heart failure, usually in combination with diuretics and digitalis. In these patients enalapril maleate tablets USP improves symptoms, increases survival, and decreases the frequency of hospitalization (see CLINICAL PHARMACOLOGY, Heart Failure, Mortality Trials for details and limitations of survival trials). Asymptomatic Left Ventricular Dysfunction. In clinically stable asymptomatic patients with left ventricular dysfunction (ejection fraction ≤35 percent), enalapril maleate tablets USP decreases the rate of development of overt heart failure and decreases the incidence of hospitalization for heart failure (see CLINICAL PHARMACOLOGY, Heart Failure, Mortality Trials for details and limitations of survival trials). In using enalapril maleate tablets USP consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that enalapril maleate tablets USP does not have a similar risk (see WARNINGS, Neutropenia/Agranulocytosis). In considering use of enalapril maleate tablets USP, it should be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, it should be noted that black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-blacks (see WARNINGS, Head and Neck Angioedema).",
"Description": "Enalapril Maleate Tablets, USP is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1- [N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, (Z)-2-butenedioate salt (1:1). Its empirical formula is C20H28N2O5C4H4O4, and its structural formula is. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril Maleate Tablets, USP are supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium bicarbonate. Each 2.5 mg tablet contains D&C red #27 aluminum lake, D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake, and FD&C yellow #6 aluminum lake. Each 10 mg tablet contains FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake and FD&C yellow #6 aluminum lake. Each 20 mg tablet contains FD&C yellow #6 aluminum lake."
},
{
"NDCCode": "50090-7312-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-7312-0) ",
"NDC11Code": "50090-7312-00",
"ProductNDC": "50090-7312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204821",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "320",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241014",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension, to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart failure in adults (1.2), 3 Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, polyvinyl alcohol-partially hydrolyzed, iron oxides (yellow and/or red), magnesium stearate, microcrystalline cellulose, macrogol/PEG 3350, talc, and titanium dioxide."
},
{
"NDCCode": "50090-7312-1",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-7312-1) ",
"NDC11Code": "50090-7312-01",
"ProductNDC": "50090-7312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204821",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "320",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241014",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension, to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart failure in adults (1.2), 3 Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).",
"Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, polyvinyl alcohol-partially hydrolyzed, iron oxides (yellow and/or red), magnesium stearate, microcrystalline cellulose, macrogol/PEG 3350, talc, and titanium dioxide."
},
{
"NDCCode": "71190-6487-3",
"PackageDescription": "1 BOX in 1 CARTON (71190-6487-3) > 15 g in 1 BOX",
"NDC11Code": "71190-6487-03",
"ProductNDC": "71190-6487",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cc Cushion Compact Sunscreen - Light / Medium",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170118",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Skin Pi LLC",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "22.4; .5",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "USES: Help to prevent sunburn. If used as directed with other sun protection measures (see directions) may decrease the risk of skin cancer and early skin ageing caused by the sun."
},
{
"NDCCode": "71190-9387-4",
"PackageDescription": "1 BOX in 1 CARTON (71190-9387-4) > 15 g in 1 BOX",
"NDC11Code": "71190-9387-04",
"ProductNDC": "71190-9387",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cc Cushion Compact Sunscreen - Medium / Deep",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170118",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Skin Pi LLC",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "22.4; .5",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "USES: Help to prevent sunburn. If used as directed with other sun protection measures (see directions) may decrease the risk of skin cancer and early skin ageing caused by the sun."
},
{
"NDCCode": "0172-7312-46",
"PackageDescription": "30 BLISTER PACK in 1 CARTON (0172-7312-46) > 1 CAPSULE, LIQUID FILLED in 1 BLISTER PACK (0172-7312-00)",
"NDC11Code": "00172-7312-46",
"ProductNDC": "0172-7312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclosporine",
"ProprietaryNameSuffix": "Modified",
"NonProprietaryName": "Cyclosporine",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20050329",
"EndMarketingDate": "20170331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065110",
"LabelerName": "IVAX Pharmaceuticals, Inc.",
"SubstanceName": "CYCLOSPORINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-04-04"
},
{
"NDCCode": "11523-7312-1",
"PackageDescription": "177 mL in 1 CAN (11523-7312-1) ",
"NDC11Code": "11523-7312-01",
"ProductNDC": "11523-7312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Coppertone Sport Continuous",
"ProprietaryNameSuffix": "Spf 100 Plus",
"NonProprietaryName": "Avobenzone, Homosalate, Octinoxate, Octisalate, Octocrylene, And Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140811",
"EndMarketingDate": "20210801",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Bayer HealthCare LLC.",
"SubstanceName": "HOMOSALATE; OCTISALATE; AVOBENZONE; OXYBENZONE; OCTOCRYLENE; OCTINOXATE",
"StrengthNumber": "137.47; 45.82; 27.49; 54.99; 91.65; 18.33",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2020-12-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140811",
"EndMarketingDatePackage": "20201201",
"SamplePackage": "N"
},
{
"NDCCode": "11523-7312-2",
"PackageDescription": "177 mL in 1 CAN (11523-7312-2) ",
"NDC11Code": "11523-7312-02",
"ProductNDC": "11523-7312",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Coppertone Sport Continuous",
"ProprietaryNameSuffix": "Spf 100 Plus",
"NonProprietaryName": "Avobenzone, Homosalate, Octinoxate, Octisalate, Octocrylene, And Oxybenzone",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140811",
"EndMarketingDate": "20210801",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Bayer HealthCare LLC.",
"SubstanceName": "HOMOSALATE; OCTISALATE; AVOBENZONE; OXYBENZONE; OCTOCRYLENE; OCTINOXATE",
"StrengthNumber": "137.47; 45.82; 27.49; 54.99; 91.65; 18.33",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2021-08-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20140811",
"EndMarketingDatePackage": "20210801",
"SamplePackage": "N"
},
{
"NDCCode": "68788-7312-1",
"PackageDescription": "15 g in 1 TUBE (68788-7312-1) ",
"NDC11Code": "68788-7312-01",
"ProductNDC": "68788-7312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Valerate",
"NonProprietaryName": "Betamethasone Valerate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018861",
"LabelerName": "Preferred Pharmaceuticals Inc.",
"SubstanceName": "BETAMETHASONE VALERATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190102",
"SamplePackage": "N"
},
{
"NDCCode": "68788-7312-4",
"PackageDescription": "45 g in 1 TUBE (68788-7312-4) ",
"NDC11Code": "68788-7312-04",
"ProductNDC": "68788-7312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Valerate",
"NonProprietaryName": "Betamethasone Valerate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018861",
"LabelerName": "Preferred Pharmaceuticals Inc.",
"SubstanceName": "BETAMETHASONE VALERATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-04-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190102",
"SamplePackage": "N"
},
{
"NDCCode": "71872-7312-1",
"PackageDescription": "1 VIAL, GLASS in 1 BAG (71872-7312-1) / 1 mL in 1 VIAL, GLASS",
"NDC11Code": "71872-7312-01",
"ProductNDC": "71872-7312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216120",
"LabelerName": "Medical Purchasing Solutions, LLC",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2023-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231006",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.",
"Description": "Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.4 mg or 1 mg of atropine sulfate monohydrate equivalent to 0.332 mg or 0.83 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment. 0.308 mOsmol/mL (calc.). pH (3.0 to 5.0). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2∙ H 2SO 4∙ H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug."
},
{
"NDCCode": "74274-201-01",
"PackageDescription": "4.7312 mL in 1 BOTTLE (74274-201-01) ",
"NDC11Code": "74274-0201-01",
"ProductNDC": "74274-201",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "90018 Sanitizer Pen",
"NonProprietaryName": "90018 Sanitizer Pen",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200901",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Huizhou Bliss Commodity Co., Ltd",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "g/117mL",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200901",
"SamplePackage": "N",
"IndicationAndUsage": "For Hand Sanitizing."
},
{
"NDCCode": "0002-0152-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-01) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0152-01",
"ProductNDC": "0002-0152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240328",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0152-04",
"PackageDescription": "4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-04) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0152-04",
"ProductNDC": "0002-0152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240808",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0152-61",
"PackageDescription": "4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-61) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0152-61",
"ProductNDC": "0002-0152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250501",
"SamplePackage": "Y",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0213-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-0213-01",
"ProductNDC": "0002-0213",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Humulin",
"ProprietaryNameSuffix": "R",
"NonProprietaryName": "Insulin Human",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "19830627",
"EndMarketingDate": "20261215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA018780",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "INSULIN HUMAN",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin [CS], Insulin [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230620",
"EndMarketingDatePackage": "20261215",
"SamplePackage": "N",
"IndicationAndUsage": "HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8."
},
{
"NDCCode": "0002-0243-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0002-0243-01) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0243-01",
"ProductNDC": "0002-0243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240328",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0243-04",
"PackageDescription": "4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0243-04) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-0243-04",
"ProductNDC": "0002-0243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240808",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-0800-01",
"PackageDescription": "1 VIAL in 1 CARTON (0002-0800-01) / 10 mL in 1 VIAL",
"NDC11Code": "00002-0800-01",
"ProductNDC": "0002-0800",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Diluent",
"NonProprietaryName": "Diluent",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19870710",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA020563",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19870710",
"SamplePackage": "N",
"IndicationAndUsage": "HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH."
},
{
"NDCCode": "0002-1152-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1152-01) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-1152-01",
"ProductNDC": "0002-1152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mounjaro",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230728",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215866",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230728",
"SamplePackage": "N",
"IndicationAndUsage": "MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .",
"Description": "MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-1200-48",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CAN (0002-1200-48) / 100 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-1200-48",
"ProductNDC": "0002-1200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amyvid",
"NonProprietaryName": "Florbetapir F 18",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202008",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "FLORBETAPIR F-18",
"StrengthNumber": "51",
"StrengthUnit": "mCi/mL",
"Pharm_Classes": "Positron Emitting Activity [MoA], Radioactive Diagnostic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230522",
"SamplePackage": "N",
"IndicationAndUsage": "AMYVID is indicated for positron emission tomography (PET) of the brain to estimate amyloid beta neuritic plaque density in adults with cognitive impairment for: : 1 Evaluation of Alzheimer's disease (AD) and other causes of cognitive decline , 2 Selection of patients who are indicated for amyloid beta-directed therapy as described in the prescribing information of the therapeutic products .",
"Description": "AMYVID (florbetapir F 18 injection) is a radioactive diagnostic drug for intravenous use. Chemically, florbetapir F 18 is (E)-4-(2-(6-(2-(2-(2[18F] fluoroethoxy)ethoxy)ethoxy)pyridine-3-yl)vinyl)-N-methylbenzamine. The molecular weight is 359 and the structural formula is:. AMYVID is a sterile, non-pyrogenic clear, colorless solution. Each mL contains 0.1 mcg to 19 mcg of florbetapir and 500 MBq to 1,900 MBq (13.5 mCi to 51 mCi) of florbetapir F 18 at EOS and the following inactive ingredients: 4.5 mg sodium ascorbate and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection. The pH of the solution is between 5.5 and 8.0."
},
{
"NDCCode": "0002-1200-50",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CAN (0002-1200-50) / 50 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-1200-50",
"ProductNDC": "0002-1200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amyvid",
"NonProprietaryName": "Florbetapir F 18",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202008",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "FLORBETAPIR F-18",
"StrengthNumber": "51",
"StrengthUnit": "mCi/mL",
"Pharm_Classes": "Positron Emitting Activity [MoA], Radioactive Diagnostic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120601",
"SamplePackage": "N",
"IndicationAndUsage": "AMYVID is indicated for positron emission tomography (PET) of the brain to estimate amyloid beta neuritic plaque density in adults with cognitive impairment for: : 1 Evaluation of Alzheimer's disease (AD) and other causes of cognitive decline , 2 Selection of patients who are indicated for amyloid beta-directed therapy as described in the prescribing information of the therapeutic products .",
"Description": "AMYVID (florbetapir F 18 injection) is a radioactive diagnostic drug for intravenous use. Chemically, florbetapir F 18 is (E)-4-(2-(6-(2-(2-(2[18F] fluoroethoxy)ethoxy)ethoxy)pyridine-3-yl)vinyl)-N-methylbenzamine. The molecular weight is 359 and the structural formula is:. AMYVID is a sterile, non-pyrogenic clear, colorless solution. Each mL contains 0.1 mcg to 19 mcg of florbetapir and 500 MBq to 1,900 MBq (13.5 mCi to 51 mCi) of florbetapir F 18 at EOS and the following inactive ingredients: 4.5 mg sodium ascorbate and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection. The pH of the solution is between 5.5 and 8.0."
},
{
"NDCCode": "0002-1214-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1214-01) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-1214-01",
"ProductNDC": "0002-1214",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240328",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-1214-04",
"PackageDescription": "4 VIAL, SINGLE-DOSE in 1 CARTON (0002-1214-04) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-1214-04",
"ProductNDC": "0002-1214",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250218",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-1220-48",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CAN (0002-1220-48) / 100 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-1220-48",
"ProductNDC": "0002-1220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tauvid",
"NonProprietaryName": "Flortaucipir F-18",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212123",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "FLORTAUCIPIR F-18",
"StrengthNumber": "100",
"StrengthUnit": "mCi/mL",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221025",
"SamplePackage": "N",
"IndicationAndUsage": "TAUVID is indicated for use with positron emission tomography (PET) imaging of the brain to estimate the density and distribution of aggregated tau neurofibrillary tangles (NFTs) in adult patients with cognitive impairment who are being evaluated for Alzheimer's disease (AD).",
"Description": "TAUVID contains flortaucipir fluorine 18 (F 18). Chemically, flortaucipir F 18 is 7-(6-[F-18]fluoropyridin-3-yl)-5H-pyrido[4,3-b]indole. The molecular weight is 262.27, the molecular formula is C16H10[18F]N3, and the structural formula is:. TAUVID is a sterile, non-pyrogenic solution for intravenous injection. The clear, colorless solution free of visible particulate matter is supplied ready to use, and each milliliter contains up to 2 micrograms of flortaucipir and 300 to 3,700 MBq (8.1 to 100 mCi) flortaucipir F 18 at end of synthesis, 1.5 mg of L-cysteine hydrochloride monohydrate USP, 2.1 mg of dibasic sodium phosphate anhydrous USP, up to 55 of micrograms hydrogen chloride and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection USP. The pH of the solution is between 5.5 and 7.5."
},
{
"NDCCode": "0002-1220-50",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CAN (0002-1220-50) / 50 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00002-1220-50",
"ProductNDC": "0002-1220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tauvid",
"NonProprietaryName": "Flortaucipir F-18",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212123",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "FLORTAUCIPIR F-18",
"StrengthNumber": "100",
"StrengthUnit": "mCi/mL",
"Status": "Active",
"LastUpdate": "2026-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221025",
"SamplePackage": "N",
"IndicationAndUsage": "TAUVID is indicated for use with positron emission tomography (PET) imaging of the brain to estimate the density and distribution of aggregated tau neurofibrillary tangles (NFTs) in adult patients with cognitive impairment who are being evaluated for Alzheimer's disease (AD).",
"Description": "TAUVID contains flortaucipir fluorine 18 (F 18). Chemically, flortaucipir F 18 is 7-(6-[F-18]fluoropyridin-3-yl)-5H-pyrido[4,3-b]indole. The molecular weight is 262.27, the molecular formula is C16H10[18F]N3, and the structural formula is:. TAUVID is a sterile, non-pyrogenic solution for intravenous injection. The clear, colorless solution free of visible particulate matter is supplied ready to use, and each milliliter contains up to 2 micrograms of flortaucipir and 300 to 3,700 MBq (8.1 to 100 mCi) flortaucipir F 18 at end of synthesis, 1.5 mg of L-cysteine hydrochloride monohydrate USP, 2.1 mg of dibasic sodium phosphate anhydrous USP, up to 55 of micrograms hydrogen chloride and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection USP. The pH of the solution is between 5.5 and 7.5."
},
{
"NDCCode": "0002-1243-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1243-01) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-1243-01",
"ProductNDC": "0002-1243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mounjaro",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230728",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215866",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230728",
"SamplePackage": "N",
"IndicationAndUsage": "MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .",
"Description": "MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-1340-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1340-01) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-1340-01",
"ProductNDC": "0002-1340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240328",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
},
{
"NDCCode": "0002-1340-04",
"PackageDescription": "4 VIAL, SINGLE-DOSE in 1 CARTON (0002-1340-04) / .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00002-1340-04",
"ProductNDC": "0002-1340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zepbound",
"NonProprietaryName": "Tirzepatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20240328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217806",
"LabelerName": "Eli Lilly and Company",
"SubstanceName": "TIRZEPATIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250218",
"SamplePackage": "N",
"IndicationAndUsage": "ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .",
"Description": "ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71190-7312-5</NDCCode>
<PackageDescription>1 BOX in 1 CARTON (71190-7312-5) > 15 g in 1 BOX</PackageDescription>
<NDC11Code>71190-7312-05</NDC11Code>
<ProductNDC>71190-7312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cc Cushion Compact Sunscreen - Fair / Light</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170118</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Skin Pi LLC</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>22.4; .5</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>USES: Help to prevent sunburn. If used as directed with other sun protection measures (see directions) may decrease the risk of skin cancer and early skin ageing caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0904-7312-61</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (0904-7312-61) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00904-7312-61</NDC11Code>
<ProductNDC>0904-7312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalapril Maleate</ProprietaryName>
<NonProprietaryName>Enalapril Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075479</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>ENALAPRIL MALEATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypertension. Enalapril maleate tablets USP are indicated for the treatment of hypertension. Enalapril maleate tablets USP are effective alone or in combination with other antihypertensive agents, especially thiazide- type diuretics. The blood pressure lowering effects of enalapril maleate tablets USP and thiazides are approximately additive. Heart Failure. Enalapril maleate tablets USP are indicated for the treatment of symptomatic congestive heart failure, usually in combination with diuretics and digitalis. In these patients enalapril maleate tablets USP improves symptoms, increases survival, and decreases the frequency of hospitalization (see CLINICAL PHARMACOLOGY, Heart Failure, Mortality Trials for details and limitations of survival trials). Asymptomatic Left Ventricular Dysfunction. In clinically stable asymptomatic patients with left ventricular dysfunction (ejection fraction ≤35 percent), enalapril maleate tablets USP decreases the rate of development of overt heart failure and decreases the incidence of hospitalization for heart failure (see CLINICAL PHARMACOLOGY, Heart Failure, Mortality Trials for details and limitations of survival trials). In using enalapril maleate tablets USP consideration should be given to the fact that another angiotensin converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease, and that available data are insufficient to show that enalapril maleate tablets USP does not have a similar risk (see WARNINGS, Neutropenia/Agranulocytosis). In considering use of enalapril maleate tablets USP, it should be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks. In addition, it should be noted that black patients receiving ACE inhibitors have been reported to have a higher incidence of angioedema compared to non-blacks (see WARNINGS, Head and Neck Angioedema).</IndicationAndUsage>
<Description>Enalapril Maleate Tablets, USP is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1- [N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, (Z)-2-butenedioate salt (1:1). Its empirical formula is C20H28N2O5C4H4O4, and its structural formula is. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril Maleate Tablets, USP are supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium bicarbonate. Each 2.5 mg tablet contains D&C red #27 aluminum lake, D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake, and FD&C yellow #6 aluminum lake. Each 10 mg tablet contains FD&C blue #2 aluminum lake, FD&C red #40 aluminum lake and FD&C yellow #6 aluminum lake. Each 20 mg tablet contains FD&C yellow #6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>50090-7312-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-7312-0) </PackageDescription>
<NDC11Code>50090-7312-00</NDC11Code>
<ProductNDC>50090-7312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204821</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>320</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension, to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart failure in adults (1.2), 3 Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).</IndicationAndUsage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, polyvinyl alcohol-partially hydrolyzed, iron oxides (yellow and/or red), magnesium stearate, microcrystalline cellulose, macrogol/PEG 3350, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50090-7312-1</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-7312-1) </PackageDescription>
<NDC11Code>50090-7312-01</NDC11Code>
<ProductNDC>50090-7312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204821</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>320</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension, to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart failure in adults (1.2), 3 Post-myocardial infarction, for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).</IndicationAndUsage>
<Description>Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl) [1,1′-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan tablets, USP, are available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan, USP. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, polyvinyl alcohol-partially hydrolyzed, iron oxides (yellow and/or red), magnesium stearate, microcrystalline cellulose, macrogol/PEG 3350, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71190-6487-3</NDCCode>
<PackageDescription>1 BOX in 1 CARTON (71190-6487-3) > 15 g in 1 BOX</PackageDescription>
<NDC11Code>71190-6487-03</NDC11Code>
<ProductNDC>71190-6487</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cc Cushion Compact Sunscreen - Light / Medium</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170118</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Skin Pi LLC</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>22.4; .5</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>USES: Help to prevent sunburn. If used as directed with other sun protection measures (see directions) may decrease the risk of skin cancer and early skin ageing caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71190-9387-4</NDCCode>
<PackageDescription>1 BOX in 1 CARTON (71190-9387-4) > 15 g in 1 BOX</PackageDescription>
<NDC11Code>71190-9387-04</NDC11Code>
<ProductNDC>71190-9387</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cc Cushion Compact Sunscreen - Medium / Deep</ProprietaryName>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170118</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Skin Pi LLC</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>22.4; .5</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>USES: Help to prevent sunburn. If used as directed with other sun protection measures (see directions) may decrease the risk of skin cancer and early skin ageing caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0172-7312-46</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 CARTON (0172-7312-46) > 1 CAPSULE, LIQUID FILLED in 1 BLISTER PACK (0172-7312-00)</PackageDescription>
<NDC11Code>00172-7312-46</NDC11Code>
<ProductNDC>0172-7312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclosporine</ProprietaryName>
<ProprietaryNameSuffix>Modified</ProprietaryNameSuffix>
<NonProprietaryName>Cyclosporine</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050329</StartMarketingDate>
<EndMarketingDate>20170331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065110</ApplicationNumber>
<LabelerName>IVAX Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CYCLOSPORINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-04-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>11523-7312-1</NDCCode>
<PackageDescription>177 mL in 1 CAN (11523-7312-1) </PackageDescription>
<NDC11Code>11523-7312-01</NDC11Code>
<ProductNDC>11523-7312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Coppertone Sport Continuous</ProprietaryName>
<ProprietaryNameSuffix>Spf 100 Plus</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octinoxate, Octisalate, Octocrylene, And Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140811</StartMarketingDate>
<EndMarketingDate>20210801</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC.</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; AVOBENZONE; OXYBENZONE; OCTOCRYLENE; OCTINOXATE</SubstanceName>
<StrengthNumber>137.47; 45.82; 27.49; 54.99; 91.65; 18.33</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140811</StartMarketingDatePackage>
<EndMarketingDatePackage>20201201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>11523-7312-2</NDCCode>
<PackageDescription>177 mL in 1 CAN (11523-7312-2) </PackageDescription>
<NDC11Code>11523-7312-02</NDC11Code>
<ProductNDC>11523-7312</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Coppertone Sport Continuous</ProprietaryName>
<ProprietaryNameSuffix>Spf 100 Plus</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octinoxate, Octisalate, Octocrylene, And Oxybenzone</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140811</StartMarketingDate>
<EndMarketingDate>20210801</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Bayer HealthCare LLC.</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; AVOBENZONE; OXYBENZONE; OCTOCRYLENE; OCTINOXATE</SubstanceName>
<StrengthNumber>137.47; 45.82; 27.49; 54.99; 91.65; 18.33</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-08-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20140811</StartMarketingDatePackage>
<EndMarketingDatePackage>20210801</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68788-7312-1</NDCCode>
<PackageDescription>15 g in 1 TUBE (68788-7312-1) </PackageDescription>
<NDC11Code>68788-7312-01</NDC11Code>
<ProductNDC>68788-7312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Valerate</ProprietaryName>
<NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018861</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68788-7312-4</NDCCode>
<PackageDescription>45 g in 1 TUBE (68788-7312-4) </PackageDescription>
<NDC11Code>68788-7312-04</NDC11Code>
<ProductNDC>68788-7312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Valerate</ProprietaryName>
<NonProprietaryName>Betamethasone Valerate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018861</ApplicationNumber>
<LabelerName>Preferred Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BETAMETHASONE VALERATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-04-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71872-7312-1</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 BAG (71872-7312-1) / 1 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>71872-7312-01</NDC11Code>
<ProductNDC>71872-7312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216120</ApplicationNumber>
<LabelerName>Medical Purchasing Solutions, LLC</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231006</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.4 mg or 1 mg of atropine sulfate monohydrate equivalent to 0.332 mg or 0.83 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment. 0.308 mOsmol/mL (calc.). pH (3.0 to 5.0). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C 17H 23NO 3) 2∙ H 2SO 4∙ H 2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula:. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug.</Description>
</NDC>
<NDC>
<NDCCode>74274-201-01</NDCCode>
<PackageDescription>4.7312 mL in 1 BOTTLE (74274-201-01) </PackageDescription>
<NDC11Code>74274-0201-01</NDC11Code>
<ProductNDC>74274-201</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>90018 Sanitizer Pen</ProprietaryName>
<NonProprietaryName>90018 Sanitizer Pen</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Huizhou Bliss Commodity Co., Ltd</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>g/117mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For Hand Sanitizing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0002-0152-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-01) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0152-01</NDC11Code>
<ProductNDC>0002-0152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0152-04</NDCCode>
<PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-04) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0152-04</NDC11Code>
<ProductNDC>0002-0152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0152-61</NDCCode>
<PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0152-61) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0152-61</NDC11Code>
<ProductNDC>0002-0152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250501</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0213-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0002-0213-01) / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-0213-01</NDC11Code>
<ProductNDC>0002-0213</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Humulin</ProprietaryName>
<ProprietaryNameSuffix>R</ProprietaryNameSuffix>
<NonProprietaryName>Insulin Human</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>19830627</StartMarketingDate>
<EndMarketingDate>20261215</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA018780</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>INSULIN HUMAN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin [CS], Insulin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230620</StartMarketingDatePackage>
<EndMarketingDatePackage>20261215</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMULIN R is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin human is produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli and has the empirical formula C257H383N65O77S6 with a molecular weight of 5.808 kDa. HUMULIN R (insulin human) injection is a short-acting human insulin for subcutaneous or intravenous use. HUMULIN R is a sterile, aqueous, clear, and colorless solution. HUMULIN R contains 100 units of insulin human in each milliliter. Each milliliter of HUMULIN R also contains glycerin (16 mg), metacresol (2.5 mg), endogenous zinc (approximately 0.015 mg/100 units,) and Water for Injection. Sodium hydroxide and hydrochloric acid may be added during manufacture to adjust the pH. The pH is 7.0 to 7.8.</Description>
</NDC>
<NDC>
<NDCCode>0002-0243-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0002-0243-01) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0243-01</NDC11Code>
<ProductNDC>0002-0243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0243-04</NDCCode>
<PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (0002-0243-04) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-0243-04</NDC11Code>
<ProductNDC>0002-0243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-0800-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (0002-0800-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>00002-0800-01</NDC11Code>
<ProductNDC>0002-0800</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Diluent</ProprietaryName>
<NonProprietaryName>Diluent</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19870710</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA020563</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19870710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HUMALOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Chemically, it is Lys(B28), Pro(B29) human insulin analog and has the empirical formula C257H383N65O77S6 and a molecular weight of 5.808 kDa, both identical to that of human insulin. Insulin lispro has the following primary structure:. HUMALOG (insulin lispro) injection is a sterile, clear, and colorless solution for subcutaneous or intravenous use. Each mL of HUMALOG U-100 contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.0 mg), glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Each mL of HUMALOG U-200 contains 200 units of insulin lispro, and the inactive ingredients: glycerin (16 mg), metacresol (3.15 mg), trace amounts of phenol, tromethamine (5 mg), zinc oxide (content adjusted to provide 0.046 mg zinc ion), and Water for Injection, USP. HUMALOG has a pH of 7.0 to 7.8. Hydrochloric acid 10% and/or sodium hydroxide 10% is added to adjust the pH.</Description>
</NDC>
<NDC>
<NDCCode>0002-1152-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1152-01) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-1152-01</NDC11Code>
<ProductNDC>0002-1152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mounjaro</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230728</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215866</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
<Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-1200-48</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CAN (0002-1200-48) / 100 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-1200-48</NDC11Code>
<ProductNDC>0002-1200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amyvid</ProprietaryName>
<NonProprietaryName>Florbetapir F 18</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202008</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>FLORBETAPIR F-18</SubstanceName>
<StrengthNumber>51</StrengthNumber>
<StrengthUnit>mCi/mL</StrengthUnit>
<Pharm_Classes>Positron Emitting Activity [MoA], Radioactive Diagnostic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AMYVID is indicated for positron emission tomography (PET) of the brain to estimate amyloid beta neuritic plaque density in adults with cognitive impairment for: : 1 Evaluation of Alzheimer's disease (AD) and other causes of cognitive decline , 2 Selection of patients who are indicated for amyloid beta-directed therapy as described in the prescribing information of the therapeutic products .</IndicationAndUsage>
<Description>AMYVID (florbetapir F 18 injection) is a radioactive diagnostic drug for intravenous use. Chemically, florbetapir F 18 is (E)-4-(2-(6-(2-(2-(2[18F] fluoroethoxy)ethoxy)ethoxy)pyridine-3-yl)vinyl)-N-methylbenzamine. The molecular weight is 359 and the structural formula is:. AMYVID is a sterile, non-pyrogenic clear, colorless solution. Each mL contains 0.1 mcg to 19 mcg of florbetapir and 500 MBq to 1,900 MBq (13.5 mCi to 51 mCi) of florbetapir F 18 at EOS and the following inactive ingredients: 4.5 mg sodium ascorbate and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection. The pH of the solution is between 5.5 and 8.0.</Description>
</NDC>
<NDC>
<NDCCode>0002-1200-50</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CAN (0002-1200-50) / 50 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-1200-50</NDC11Code>
<ProductNDC>0002-1200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amyvid</ProprietaryName>
<NonProprietaryName>Florbetapir F 18</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202008</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>FLORBETAPIR F-18</SubstanceName>
<StrengthNumber>51</StrengthNumber>
<StrengthUnit>mCi/mL</StrengthUnit>
<Pharm_Classes>Positron Emitting Activity [MoA], Radioactive Diagnostic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AMYVID is indicated for positron emission tomography (PET) of the brain to estimate amyloid beta neuritic plaque density in adults with cognitive impairment for: : 1 Evaluation of Alzheimer's disease (AD) and other causes of cognitive decline , 2 Selection of patients who are indicated for amyloid beta-directed therapy as described in the prescribing information of the therapeutic products .</IndicationAndUsage>
<Description>AMYVID (florbetapir F 18 injection) is a radioactive diagnostic drug for intravenous use. Chemically, florbetapir F 18 is (E)-4-(2-(6-(2-(2-(2[18F] fluoroethoxy)ethoxy)ethoxy)pyridine-3-yl)vinyl)-N-methylbenzamine. The molecular weight is 359 and the structural formula is:. AMYVID is a sterile, non-pyrogenic clear, colorless solution. Each mL contains 0.1 mcg to 19 mcg of florbetapir and 500 MBq to 1,900 MBq (13.5 mCi to 51 mCi) of florbetapir F 18 at EOS and the following inactive ingredients: 4.5 mg sodium ascorbate and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection. The pH of the solution is between 5.5 and 8.0.</Description>
</NDC>
<NDC>
<NDCCode>0002-1214-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1214-01) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-1214-01</NDC11Code>
<ProductNDC>0002-1214</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-1214-04</NDCCode>
<PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (0002-1214-04) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-1214-04</NDC11Code>
<ProductNDC>0002-1214</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-1220-48</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CAN (0002-1220-48) / 100 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-1220-48</NDC11Code>
<ProductNDC>0002-1220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tauvid</ProprietaryName>
<NonProprietaryName>Flortaucipir F-18</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212123</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>FLORTAUCIPIR F-18</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mCi/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TAUVID is indicated for use with positron emission tomography (PET) imaging of the brain to estimate the density and distribution of aggregated tau neurofibrillary tangles (NFTs) in adult patients with cognitive impairment who are being evaluated for Alzheimer's disease (AD).</IndicationAndUsage>
<Description>TAUVID contains flortaucipir fluorine 18 (F 18). Chemically, flortaucipir F 18 is 7-(6-[F-18]fluoropyridin-3-yl)-5H-pyrido[4,3-b]indole. The molecular weight is 262.27, the molecular formula is C16H10[18F]N3, and the structural formula is:. TAUVID is a sterile, non-pyrogenic solution for intravenous injection. The clear, colorless solution free of visible particulate matter is supplied ready to use, and each milliliter contains up to 2 micrograms of flortaucipir and 300 to 3,700 MBq (8.1 to 100 mCi) flortaucipir F 18 at end of synthesis, 1.5 mg of L-cysteine hydrochloride monohydrate USP, 2.1 mg of dibasic sodium phosphate anhydrous USP, up to 55 of micrograms hydrogen chloride and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection USP. The pH of the solution is between 5.5 and 7.5.</Description>
</NDC>
<NDC>
<NDCCode>0002-1220-50</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CAN (0002-1220-50) / 50 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00002-1220-50</NDC11Code>
<ProductNDC>0002-1220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tauvid</ProprietaryName>
<NonProprietaryName>Flortaucipir F-18</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212123</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>FLORTAUCIPIR F-18</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mCi/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TAUVID is indicated for use with positron emission tomography (PET) imaging of the brain to estimate the density and distribution of aggregated tau neurofibrillary tangles (NFTs) in adult patients with cognitive impairment who are being evaluated for Alzheimer's disease (AD).</IndicationAndUsage>
<Description>TAUVID contains flortaucipir fluorine 18 (F 18). Chemically, flortaucipir F 18 is 7-(6-[F-18]fluoropyridin-3-yl)-5H-pyrido[4,3-b]indole. The molecular weight is 262.27, the molecular formula is C16H10[18F]N3, and the structural formula is:. TAUVID is a sterile, non-pyrogenic solution for intravenous injection. The clear, colorless solution free of visible particulate matter is supplied ready to use, and each milliliter contains up to 2 micrograms of flortaucipir and 300 to 3,700 MBq (8.1 to 100 mCi) flortaucipir F 18 at end of synthesis, 1.5 mg of L-cysteine hydrochloride monohydrate USP, 2.1 mg of dibasic sodium phosphate anhydrous USP, up to 55 of micrograms hydrogen chloride and 0.1 mL dehydrated alcohol in 0.9% sodium chloride injection USP. The pH of the solution is between 5.5 and 7.5.</Description>
</NDC>
<NDC>
<NDCCode>0002-1243-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1243-01) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-1243-01</NDC11Code>
<ProductNDC>0002-1243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mounjaro</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230728</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215866</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MOUNJARO® is indicated: : 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. , 2 to reduce the risk of major adverse cardiovascular (CV) events (CV death, non-fatal myocardial infarction (MI), or non-fatal stroke) in adults with type 2 diabetes mellitus who are at high risk for these events. .</IndicationAndUsage>
<Description>MOUNJARO (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a once weekly GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. MOUNJARO is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. MOUNJARO has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-1340-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0002-1340-01) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-1340-01</NDC11Code>
<ProductNDC>0002-1340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240328</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
<NDC>
<NDCCode>0002-1340-04</NDCCode>
<PackageDescription>4 VIAL, SINGLE-DOSE in 1 CARTON (0002-1340-04) / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00002-1340-04</NDC11Code>
<ProductNDC>0002-1340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zepbound</ProprietaryName>
<NonProprietaryName>Tirzepatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20240328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217806</ApplicationNumber>
<LabelerName>Eli Lilly and Company</LabelerName>
<SubstanceName>TIRZEPATIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>G-Protein-linked Receptor Interactions [MoA], GLP-1 Receptor Agonist [EPC], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Glucose-dependent Insulinotropic Polypeptide Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZEPBOUND® is indicated in combination with a reduced-calorie diet and increased physical activity: : 1 to reduce excess body weight and maintain weight reduction long term in adults with obesity or adults with overweight in the presence of at least one weight-related comorbid condition. , 2 to treat moderate to severe obstructive sleep apnea (OSA) in adults with obesity. .</IndicationAndUsage>
<Description>ZEPBOUND (tirzepatide) injection, for subcutaneous use, contains tirzepatide, a GIP receptor and GLP-1 receptor agonist. Tirzepatide is based on the GIP sequence and contains aminoisobutyric acid (Aib) in positions 2 and 13, a C-terminal amide, and Lys residue at position 20 that is attached to 1,20-eicosanedioic acid via a linker. The molecular weight is 4813.53 Da and the empirical formula is C225H348N48O68. Structural formula:. ZEPBOUND is a clear, colorless to slightly yellow, sterile solution for subcutaneous use. Each single-dose pen or single-dose vial contains a 0.5 mL solution of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide and the following excipients: sodium chloride (4.1 mg), sodium phosphate dibasic heptahydrate (0.7 mg), and water for injection. Each multi-dose vial or single-patient-use KwikPen contains 2.4 mL of solution, which provides 4 doses of 2.5 mg, 5 mg, 7.5 mg, 10 mg, 12.5 mg, or 15 mg of tirzepatide per 0.6 mL. Each dose contains the following excipients: benzyl alcohol (5.4 mg), glycerin (4.8 mg), phenol (1.08 mg), sodium chloride (1.05 mg), sodium phosphate dibasic heptahydrate (0.8 mg), and water for injection. Hydrochloric acid solution and/or sodium hydroxide solution may have been added to adjust the pH. ZEPBOUND has a pH of 6.5 to 7.5. Each single-patient-use KwikPen contains additional volume to allow for device priming.</Description>
</NDC>
</NDCList>