{
"NDC": [
{
"NDCCode": "71205-229-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-229-90) ",
"NDC11Code": "71205-0229-90",
"ProductNDC": "71205-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077443",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis: Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction: Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONS and WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 50 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine."
},
{
"NDCCode": "71205-229-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (71205-229-30) ",
"NDC11Code": "71205-0229-30",
"ProductNDC": "71205-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077443",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis: Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction: Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONS and WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 50 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine."
},
{
"NDCCode": "71205-229-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (71205-229-60) ",
"NDC11Code": "71205-0229-60",
"ProductNDC": "71205-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077443",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis: Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction: Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONS and WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 50 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine."
},
{
"NDCCode": "16590-229-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (16590-229-90)",
"NDC11Code": "16590-0229-90",
"ProductNDC": "16590-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075964",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.",
"Description": "Tramadol hydrochloride tablet, USP is a centrally acting analgesic. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Molecular formula is C16H13NO2HCl. The molecular weight of tramadol hydrochloride, USP is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH7. Tramadol hydrochloride tablets, USP for oral administration contain 50 mg of tramadol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide."
},
{
"NDCCode": "42291-229-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (42291-229-90)",
"NDC11Code": "42291-0229-90",
"ProductNDC": "42291-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desloratadine",
"NonProprietaryName": "Desloratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078355",
"LabelerName": "AvKARE, Inc.",
"SubstanceName": "DESLORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-15",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "51655-229-26",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (51655-229-26) ",
"NDC11Code": "51655-0229-26",
"ProductNDC": "51655-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040197",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230215",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure., 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease., 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only)., 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate. (See CLINICAL PHARMACOLOGY, Clinical Studies. ) .",
"Description": "Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. C 18H 24O 2M.W. 272.38. Inactive Ingredients:Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake."
},
{
"NDCCode": "52183-229-90",
"PackageDescription": "90 LOZENGE in 1 BAG (52183-229-90) ",
"NDC11Code": "52183-0229-90",
"ProductNDC": "52183-229",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ludens Wild Cherry Throat Drops",
"NonProprietaryName": "Pectin",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20091029",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M022",
"LabelerName": "Prestige Brands Holdings, Inc.",
"SubstanceName": "PECTIN",
"StrengthNumber": "2.8",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-08-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091029",
"SamplePackage": "N"
},
{
"NDCCode": "55111-229-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (55111-229-90) ",
"NDC11Code": "55111-0229-90",
"ProductNDC": "55111-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076714",
"LabelerName": "Dr.Reddy's Laboratories Limited",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091231",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.",
"Description": "Pravastatin sodium USP is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium USP is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8ahexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-,monosodium salt,[1S [1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula:. Pravastatin sodium USP is an white to yellowish white, hygroscopic powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is freely soluble in water, in methanol, soluble in alcohol, very slightly soluble in acetonitrile, practically insoluble in ether, in ethyl acetate, and in chloroform. Pravastatin sodium tablets USP are available for oral administration as 10 mg, 20 mg, 40 mg or 80 mg tablets. Inactive ingredients include: croscarmellose sodium, crospovidone, magnesium stearate, meglumine, microcelac 100 (lactose monohydrate and microcrystalline cellulose), microcrystalline cellulose, opadry white YS-1-7040 (hypromellose 2910, polyethylene glycol 8000, talc, and titanium dioxide)."
},
{
"NDCCode": "55700-229-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55700-229-90)",
"NDC11Code": "55700-0229-90",
"ProductNDC": "55700-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-10-22",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "60760-229-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (60760-229-90)",
"NDC11Code": "60760-0229-90",
"ProductNDC": "60760-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130509",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077091",
"LabelerName": "St Marys Medical Park Pharmacy",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "61786-229-02",
"PackageDescription": "90 TABLET in 1 BOTTLE (61786-229-02)",
"NDC11Code": "61786-0229-02",
"ProductNDC": "61786-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150317",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074174",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "61919-229-90",
"PackageDescription": "90 BOTTLE in 1 BOTTLE (61919-229-90) > 120 BOTTLE in 1 BOTTLE (61919-229-72) > 60 BOTTLE in 1 BOTTLE (61919-229-60) > 50 BOTTLE in 1 BOTTLE (61919-229-50) > 30 TABLET in 1 BOTTLE (61919-229-30) ",
"NDC11Code": "61919-0229-90",
"ProductNDC": "61919-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075964",
"LabelerName": "Direct Rx",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20140101",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.",
"Description": "Tramadol hydrochloride tablet, USP is a centrally acting analgesic. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Molecular formula is C16H13NO2HCl. The molecular weight of tramadol hydrochloride, USP is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH7. Tramadol hydrochloride tablets, USP for oral administration contain 50 mg of tramadol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide."
},
{
"NDCCode": "68462-229-90",
"PackageDescription": "90 TABLET, CHEWABLE in 1 BOTTLE (68462-229-90) ",
"NDC11Code": "68462-0229-90",
"ProductNDC": "68462-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20090219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079099",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090219",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine tablets for oral suspension (chewable, dispersible tablets) are indicated for. Epilepsy – adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic (PGTC) seizures., 3 generalized seizures of Lennox-Gastaut syndrome. (1.1).",
"Description": "Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine’s chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09 g/mol. Lamotrigine, USP is a white powder and has a pKa of 5.7. Lamotrigine, USP is slightly soluble in 0.1 N hydrochloric acid, in acetone, in methanol, and in water. The structural formula is:. Lamotrigine tablets for oral suspension (chewable, dispersible tablets), 5 mg and 25 mg are supplied for oral administration. The tablets contain 5 mg (white to off-white) or 25 mg (white to off-white) of lamotrigine, USP and the following inactive ingredients: aspartame, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone K-25, sodium starch glycolate and strawberry guarana 586997 AP 0551. FDA approved dissolution test specifications differ the USP for Lamotrigine tablets for oral suspension, USP (chewable, dispersible tablets), 5 mg and 25 mg."
},
{
"NDCCode": "71610-229-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (71610-229-60) ",
"NDC11Code": "71610-0229-60",
"ProductNDC": "71610-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203572",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2023-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190201",
"SamplePackage": "N",
"IndicationAndUsage": "Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one: It is a nearly white powder almost insoluble in water. Each lorazepam tablet, USP to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are anhydrous lactose, magnesium stearate, microcrystalline cellulose, and polacrilin potassium."
},
{
"NDCCode": "72189-229-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (72189-229-90) ",
"NDC11Code": "72189-0229-90",
"ProductNDC": "72189-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090515",
"LabelerName": "DIRECT RX",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Partial Onset Seizures. Levetiracetam tablet is indicated as adjunctive therapy in the treatment of partial onset seizures in adults and children 1 month of age and older with epilepsy. 1.2 Myoclonic Seizures in Patients with Juvenile Myoclonic Epilepsy. Levetiracetam tablet is indicated as adjunctive therapy in the treatment of myoclonic seizures in adults and adolescents 12 years of age and older with juvenile myoclonic epilepsy. 1.3 Primary Generalized Tonic-Clonic Seizures. Levetiracetam tablet is indicated as adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in adults and children 6 years of age and older with idiopathic generalized epilepsy.",
"Description": "Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (1040 mg/mL). It is freely soluble in chloroform (653 mg/mL) and in methanol (536 mg/mL), soluble in ethanol (165 mg/mL), sparingly soluble in acetonitrile (57 mg/mL) and practically insoluble in n-hexane. (Solubility limits are expressed as mg/mL solvent.) Levetiracetam tablets, USP contain the labeled amount of levetiracetam USP. Inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, povidone, talc and additional agents listed below: 250 mg tablets: opadry II blue (FD&C blue #2/indigo carmine aluminum lake, polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) 500 mg tablets: opadry II yellow (iron oxide yellow, polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) 750 mg tablets: opadry II orange (FD&C yellow # 6/sunset yellow FCF aluminum lake, iron oxide red, polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) 1000 mg tablets: opadry II white (polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) USP Dissolution test is 4."
},
{
"NDCCode": "72865-229-90",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (72865-229-90) ",
"NDC11Code": "72865-0229-90",
"ProductNDC": "72865-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202882",
"LabelerName": "XLCare Pharmaceuticals Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-01-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220501",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole Sodium Delayed-Release Tablets are indicated for:.",
"Description": "The active ingredient in Pantoprazole Sodium Delayed-Release Tablets, USP, a PPI, is a substituted benzimidazole, 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridyl)methyl] sulfinyl]benzimidazole, sodium salt, sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S . 1.5 H 2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate, USP is a white to off-white powder. Pantoprazole sodium sesquihydrate, USP is freely soluble in water, in methanol, in dehydrated alcohol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole Sodium is supplied as a Delayed-Release Tablet, available in two strengths (20 mg and 40 mg). Each Pantoprazole Sodium Delayed-Release Tablet, USP contains 45.11 mg or 22.55 mg of pantoprazole sodium sesquihydrate, USP (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, carnauba wax, ferric oxide yellow, hydroxy propyl cellulose, hypromellose, lactose monohydrate, methacrylic acid copolymer, polysorbate 80, propylene glycol, sodium carbonate anhydrous, sodium lauryl sulfate, titanium dioxide and triethyl citrate. The tablets are imprinted with opacode black containing ammonium hydroxide, iron oxide black, propylene glycol and shellac. Pantoprazole Sodium Delayed-Release Tablets, (40 mg and 20 mg) complies with USP dissolution test 2."
},
{
"NDCCode": "76420-229-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-229-90) ",
"NDC11Code": "76420-0229-90",
"ProductNDC": "76420-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine",
"NonProprietaryName": "Tizanidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020703",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076286",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220707",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine tablet is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine tablets should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration ( 2.1) ].",
"Description": "Tizanidine hydrochloride USP, is a central α 2-adrenergic agonist. Tizanidine hydrochloride USP is almost white to slightly yellow crystalline powder, which is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole monohydrochloride. Tizanidine’s molecular formula is C 9H 8ClN 5S.HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine tablets USP, are supplied as 2 mg and 4 mg tablets for oral administration. Tizanidine tablets USP, contain the active ingredient, tizanidine hydrochloride USP (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base), and the inactive ingredients, anhydrous lactose, microcrystalline cellulose, colloidal silicon dioxide and stearic acid."
},
{
"NDCCode": "42385-928-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42385-928-90) ",
"NDC11Code": "42385-0928-90",
"ProductNDC": "42385-928",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"NonProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212786",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE",
"StrengthNumber": "600; 300; 300",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]",
"Status": "Active",
"LastUpdate": "2023-11-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200514",
"SamplePackage": "N",
"IndicationAndUsage": "Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 40 kg.",
"Description": "Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets contain efavirenz (EFV), an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI), lamivudine (also known as 3TC), a synthetic nucleoside analogue with activity against HIV-1 and tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir), a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5'-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are for oral administration. Each film coated tablet contains efavirenz USP 600 mg, lamivudine USP 300 mg and tenofovir disoproxil fumarate 300 mg equivalent to tenofovir disoproxil 245 mg, and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz: The chemical name of efavirenz is (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is. Efavirenz USP is a white to off white powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL).Lamivudine: The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine USP is a white or almost white powder and is soluble in water.Tenofovir Disoproxil Fumarate: The chemical name of tenofovir DF is 9-[(R)-2- [[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.52. It has the following structural formula: Tenofovir DF is a white to off white powder freely soluble in dimethyl formamide, soluble in methanol and slightly soluble in water at 25°C. It has a partition coefficient (log p) of 0.75."
},
{
"NDCCode": "42385-929-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42385-929-90) ",
"NDC11Code": "42385-0929-90",
"ProductNDC": "42385-929",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"NonProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213038",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE",
"StrengthNumber": "400; 300; 300",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]",
"Status": "Active",
"LastUpdate": "2024-05-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200514",
"SamplePackage": "N",
"IndicationAndUsage": "Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.",
"Description": "Efavirenz, lamivudine and tenofovir disoproxil fumarate is a fixed-dose combination tablet for oral administration. Each film coated tablet contains efavirenz USP 400 mg, lamivudine USP 300 mg and tenofovir disoproxil fumarate 300 mg equivalent to tenofovir disoproxil 245 mg. Each tablet contains the following inactive ingredients: croscarmellose sodium, ferric oxide yellow, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz:Efavirenz (EFV) is an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI). Efavirenz is chemically described as (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is. Efavirenz USP is a white to off white powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine:Lamivudine (also known as 3TC) is a synthetic nucleoside analogue with activity against HIV-1 and HBV.The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxy methyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine USP is a white or almost white powder and is soluble in water. Tenofovir Disoproxil Fumarate: Tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir) is a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5' -monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of tenofovir disoproxil fumarateis 9-[(R)-2- [[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.52. It has the following structural formula. Tenofovir disoproxil fumarate is a white to off white powder freely soluble in dimethyl formamide, soluble in methanol and slightly soluble in water at 25°C. It has a partition coefficient (log p) of 0.75."
},
{
"NDCCode": "42385-929-91",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42385-929-91) ",
"NDC11Code": "42385-0929-91",
"ProductNDC": "42385-929",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"NonProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213038",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE",
"StrengthNumber": "400; 300; 300",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]",
"Status": "Active",
"LastUpdate": "2024-05-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200514",
"SamplePackage": "N",
"IndicationAndUsage": "Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.",
"Description": "Efavirenz, lamivudine and tenofovir disoproxil fumarate is a fixed-dose combination tablet for oral administration. Each film coated tablet contains efavirenz USP 400 mg, lamivudine USP 300 mg and tenofovir disoproxil fumarate 300 mg equivalent to tenofovir disoproxil 245 mg. Each tablet contains the following inactive ingredients: croscarmellose sodium, ferric oxide yellow, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz:Efavirenz (EFV) is an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI). Efavirenz is chemically described as (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is. Efavirenz USP is a white to off white powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine:Lamivudine (also known as 3TC) is a synthetic nucleoside analogue with activity against HIV-1 and HBV.The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxy methyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine USP is a white or almost white powder and is soluble in water. Tenofovir Disoproxil Fumarate: Tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir) is a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5' -monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of tenofovir disoproxil fumarateis 9-[(R)-2- [[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.52. It has the following structural formula. Tenofovir disoproxil fumarate is a white to off white powder freely soluble in dimethyl formamide, soluble in methanol and slightly soluble in water at 25°C. It has a partition coefficient (log p) of 0.75."
},
{
"NDCCode": "42385-962-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42385-962-90) ",
"NDC11Code": "42385-0962-90",
"ProductNDC": "42385-962",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abacavir And Lamivudine",
"NonProprietaryName": "Abacavir And Lamivudine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216332",
"LabelerName": "Laurus Labs Limited",
"SubstanceName": "ABACAVIR SULFATE; LAMIVUDINE",
"StrengthNumber": "600; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 1A1 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Abacavir and lamivudine tablets, in combination with other antiretroviral agents, are indicated for the treatment of human immunodeficiency virus type 1 (HIV-1) infection.",
"Description": "Abacavir and Lamivudine. Abacavir and lamivudine tablets, USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets, USP are for oral administration. Each orange colored, capsule-shaped, biconvex film coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate USP and 300 mg of lamivudine USP, and the inactive ingredients magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The tablets are coated with a film (OPADRY orange YS-1-13065-A) that is made of FD&C Yellow No.6, hypromellose, polyethylene glycol 400, polysorbate 80, and titanium dioxide. Abacavir Sulfate, USP. The chemical name of abacavir sulfate, USP is (1S, 4R)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4and a molecular weight of 670.74 g per mol. It has the following structural formula. Abacavir sulfate, USP is a white to almost white powder and is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine, USP. The chemical name of lamivudine, USP is (2(1H)-Pyrimidinone,4-amino-1-[2-(hydroxymethyl)-1,3-oxathiolan-5-yl]-, (2R-cis)-. Lamivudine, USP is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine, USP has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine, USP is a white to almost white solid and is soluble in water, sparingly soluble in methanol, slightly soluble to practically insoluble in 96% ethanol and practically insoluble in acetone. Meets USP Dissolution Test 2."
},
{
"NDCCode": "49702-258-37",
"PackageDescription": "1 KIT in 1 CARTON (49702-258-37) * 90 TABLET, FILM COATED in 1 BOTTLE (49702-272-59) ",
"NDC11Code": "49702-0258-37",
"ProductNDC": "49702-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triumeq Pd",
"NonProprietaryName": "Abacavir Sulfate, Dolutegravir Sodium, Lamivudine",
"DosageFormName": "KIT",
"StartMarketingDate": "20220330",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215413",
"LabelerName": "ViiV Healthcare Company",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220330",
"SamplePackage": "N",
"IndicationAndUsage": "TRIUMEQ and TRIUMEQ PD are indicated for the treatment of HIV-1 infection in adults and in pediatric patients aged at least 3 months and weighing at least 6 kg. Limitations of Use. TRIUMEQ and TRIUMEQ PD alone are not recommended in patients with resistance‑associated integrase substitutions or clinically suspected integrase strand transfer inhibitor (INSTI) resistance because the dose of dolutegravir in TRIUMEQ and TRIUMEQ PD is insufficient in these subpopulations. See full prescribing information for TIVICAY (dolutegravir).",
"Description": "TRIUMEQ and TRIUMEQ PD. TRIUMEQ and TRIUMEQ PD contain an INSTI (dolutegravir) and 2 nucleoside analogues (abacavir and lamivudine) with inhibitory activity against HIV. Each film-coated tablet of TRIUMEQ, for oral use, contains 600 mg of abacavir (present as 702 mg of abacavir sulfate), 50 mg of dolutegravir (present as 52.6 mg of dolutegravir sodium), and 300 mg of lamivudine. The inactive ingredients of TRIUMEQ tablets include D-mannitol, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The tablet film‑coating contains the inactive ingredients iron oxide black, iron oxide red, macrogol/PEG, polyvinyl alcohol–part hydrolyzed, talc, and titanium oxide. Each film-coated tablet of TRIUMEQ PD for oral suspension contains 60 mg of abacavir (present as 70.2 mg of abacavir sulfate), 5 mg of dolutegravir (present as 5.26 mg of dolutegravir sodium), and 30 mg of lamivudine. The inactive ingredients of TRIUMEQ PD tablets include acesulfame potassium, crospovidone, mannitol, microcrystalline cellulose, povidone K29/32, silicified microcrystalline cellulose, sodium starch glycolate, sodium stearyl fumarate, strawberry cream flavor and sucralose. The tablet film-coating contains the inactive ingredients: ferric oxide yellow, macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc and titanium dioxide. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g/mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. Dolutegravir Sodium. The chemical name of dolutegravir sodium is sodium (4R,12aS)-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2H-pyrido[1',2':4,5]pyrazino[2,1-b][1,3]oxazin-7-olate. The empirical formula is C20H18F2N3NaO5 and the molecular weight is 441.36 g/mol. It has the following structural formula. Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (‑)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (‑)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g/mol. It has the following structural formula. Lamivudine is a white to off-white crystalline solid and is soluble in water."
},
{
"NDCCode": "70710-1049-9",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (70710-1049-9) ",
"NDC11Code": "70710-1049-09",
"ProductNDC": "70710-1049",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abacavir And Lamivudine",
"NonProprietaryName": "Abacavir And Lamivudine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190314",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208990",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ABACAVIR SULFATE; LAMIVUDINE",
"StrengthNumber": "600; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 1A1 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190314",
"SamplePackage": "N",
"IndicationAndUsage": "Abacavir and lamivudine tablets, a combination of abacavir and lamivudine, both nucleoside analogue HIV-1 reverse transcriptase inhibitors, are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection. (1).",
"Description": "Abacavir and Lamivudine Tablets, USP. Abacavir and lamivudine tablets contain the following 2 synthetic nucleoside analogues: abacavir sulfate and lamivudine with inhibitory activity against HIV-1. Each tablet contains 600 mg of abacavir (equivalent to 702.00 mg abacavir sulfate, USP) and 300 mg of lamivudine, USP and the inactive ingredients: croscarmellose sodium, D&C yellow #10 aluminum lake, FD&C red #40 aluminum lake, hypromellose, iron oxide yellow, magnesium stearate, microcrystalline cellulose polysorbate 80, polyethylene glycol, povidone K-30 and titanium dioxide. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6 (cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g per mol. It has the following structural formula. Abacavir sulfate, USP is white to almost white powder. It is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. All dosages for abacavir sulfate are expressed in terms of abacavir. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3 oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g per mol. It has the following structural formula. Lamivudine, USP is a white to off-white solid, melts at about 176°C. It is soluble in water."
},
{
"NDCCode": "71205-001-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-001-90) ",
"NDC11Code": "71205-0001-90",
"ProductNDC": "71205-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088628",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia,, 2 Have not been tolerated, or are not expected to be tolerated.",
"Description": "Acetaminophen and codeine phosphate are supplied in tablet form for oral administration. Acetaminophen, USP, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C8H9NO2 M.W. 151.16. Codeine phosphate, USP, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. C18H21NO3H3PO4½H2O M.W. 406.37. Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/15 mg) contains: 1 Acetaminophen, USP...........................300 mgCodeine Phosphate, USP.......................15 mg."
},
{
"NDCCode": "71205-003-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-003-90) ",
"NDC11Code": "71205-0003-90",
"ProductNDC": "71205-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate",
"NonProprietaryName": "Metoprolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202871",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "METOPROLOL TARTRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Hypertension Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris Metoprolol tartrate tablets are indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol. Oral metoprolol therapy can be initiated after intravenous metoprolol therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS.",
"Description": "Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25 mg, 50 mg and 100 mg tablets for oral administration. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-2-methoxyethyl)phenoxy]-2-propanol L-(+)-tartrate (2:1) salt, its structural formula is. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, povidone, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate hypromellose, titanium dioxide and polyethylene glycol. In addition, the 50 mg product contains D&C Red No. 30 Aluminum Lake and the 100 mg product contains FD&C Blue No. 2 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake as coloring agents."
},
{
"NDCCode": "71205-004-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-004-90) ",
"NDC11Code": "71205-0004-90",
"ProductNDC": "71205-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091519",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 320",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160 mmHg/100 mmHg has about a 41% likelihood of achieving a goal of less than 140 mmHg (systolic) and 60% likelihood of achieving less than 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, USP a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide, USP is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the film-coated tablets are microcrystalline cellulose, croscarmellose sodium, sodium dodecyl sulphate, hydroxypropylcellulose, silicified microcrystalline cellulose, low substituted hydroxypropylcellulose, magnesium stearate, polyvinyl alcohol-part. hydrolyzed, titanium dioxide, talc, polyethylene glycol, and iron oxide yellow. In addition, 80 mg /12.5 mg and 160 mg/12.5 mg tablets contain FD&C red#40 /allura red AC aluminum lake, 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg and 320 mg/12.5 mg tablets contain iron oxide black, and 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg tablets contain iron oxide red."
},
{
"NDCCode": "71205-005-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71205-005-90) ",
"NDC11Code": "71205-0005-90",
"ProductNDC": "71205-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208706",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major Depressive Disorder [see Clinical Studies (14.1)]. , 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)]. , 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)]. , 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].",
"Description": "Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Blue No. 2, titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending."
},
{
"NDCCode": "71205-007-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-007-90) ",
"NDC11Code": "71205-0007-90",
"ProductNDC": "71205-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ranitidine",
"ProprietaryNameSuffix": "Immediate Release",
"NonProprietaryName": "Ranitidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205512",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "RANITIDINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N"
},
{
"NDCCode": "71205-008-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-008-90) ",
"NDC11Code": "71205-0008-90",
"ProductNDC": "71205-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206434",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Pediatric use information for patients 7 to 17 years of age is approved for AstraZeneca’s CRESTOR (rosuvastatin calcium) tablets. However, due to AstraZeneca’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.",
"Description": "Rosuvastatin calcium is a synthetic lipid-lowering agent for oral administration. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin calcium tablets for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: For 5 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, and ferric oxide yellow. For 10, 20 and 40 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, FD & C yellow No. 6, FD & C red No. 40, and FD & C blue No.1."
},
{
"NDCCode": "71205-015-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-015-90) ",
"NDC11Code": "71205-0015-90",
"ProductNDC": "71205-015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2019-11-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71205-229-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-229-90) </PackageDescription>
<NDC11Code>71205-0229-90</NDC11Code>
<ProductNDC>71205-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077443</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis: Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction: Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONS and WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 50 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine.</Description>
</NDC>
<NDC>
<NDCCode>71205-229-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (71205-229-30) </PackageDescription>
<NDC11Code>71205-0229-30</NDC11Code>
<ProductNDC>71205-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077443</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis: Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction: Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONS and WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 50 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine.</Description>
</NDC>
<NDC>
<NDCCode>71205-229-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71205-229-60) </PackageDescription>
<NDC11Code>71205-0229-60</NDC11Code>
<ProductNDC>71205-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077443</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents. Angina Pectoris Due to Coronary Atherosclerosis: Atenolol is indicated for the long-term management of patients with angina pectoris. Acute Myocardial Infarction: Atenolol is indicated in the management of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality. Treatment can be initiated as soon as the patient's clinical condition allows. (See DOSAGE AND ADMNISTRATION, CONTRAINDICATIONS and WARNINGS). In general, there is no basis for treating patients like those who were excluded from the ISIS-1 trial (blood pressure less than 100 mm Hg systolic, heart rate less than 50 bpm) or have other reasons to avoid beta-blockade. As noted above, some subgroups (e.g., elderly patients with systolic blood pressure below 120 mm Hg) seemed less likely to benefit.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP is available as 50 mg tablets for oral administration. Inactive Ingredients: Magnesium stearate, microcrystalline cellulose, povidone, sodium starch glycolate, hydroxypropyl methylcellulose, titanium dioxide and glycerine.</Description>
</NDC>
<NDC>
<NDCCode>16590-229-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (16590-229-90)</PackageDescription>
<NDC11Code>16590-0229-90</NDC11Code>
<ProductNDC>16590-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075964</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablet, USP is a centrally acting analgesic. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Molecular formula is C16H13NO2HCl. The molecular weight of tramadol hydrochloride, USP is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH7. Tramadol hydrochloride tablets, USP for oral administration contain 50 mg of tramadol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42291-229-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (42291-229-90)</PackageDescription>
<NDC11Code>42291-0229-90</NDC11Code>
<ProductNDC>42291-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desloratadine</ProprietaryName>
<NonProprietaryName>Desloratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078355</ApplicationNumber>
<LabelerName>AvKARE, Inc.</LabelerName>
<SubstanceName>DESLORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-15</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51655-229-26</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (51655-229-26) </PackageDescription>
<NDC11Code>51655-0229-26</NDC11Code>
<ProductNDC>51655-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040197</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol tablets are indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause., 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure., 4 Treatment of breast cancer (for palliation only) in appropriately selected women and men with metastatic disease., 5 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only)., 6 Prevention of osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and for whom non-estrogen medications are not considered to be appropriate. (See CLINICAL PHARMACOLOGY, Clinical Studies. ) .</IndicationAndUsage>
<Description>Estradiol Tablets, USP for oral administration contains 0.5, 1 or 2 mg of micronized estradiol, USP per tablet. Estradiol, USP (17β-estradiol) is a white, crystalline solid, chemically described as estra-1,3,5,(10)-triene-3, 17β-diol. The structural formula is. C 18H 24O 2M.W. 272.38. Inactive Ingredients:Colloidal silicon dioxide, corn starch, dibasic calcium phosphate, lactose monohydrate, magnesium stearate, and sodium starch glycolate. In addition, the 1 mg also contains FD&C blue no. 1 aluminum lake and D&C red no. 27 aluminum lake. The 2 mg also contains FD&C blue no. 1 aluminum lake and FD&C yellow no. 5 (tartrazine) aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>52183-229-90</NDCCode>
<PackageDescription>90 LOZENGE in 1 BAG (52183-229-90) </PackageDescription>
<NDC11Code>52183-0229-90</NDC11Code>
<ProductNDC>52183-229</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ludens Wild Cherry Throat Drops</ProprietaryName>
<NonProprietaryName>Pectin</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091029</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M022</ApplicationNumber>
<LabelerName>Prestige Brands Holdings, Inc.</LabelerName>
<SubstanceName>PECTIN</SubstanceName>
<StrengthNumber>2.8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55111-229-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (55111-229-90) </PackageDescription>
<NDC11Code>55111-0229-90</NDC11Code>
<ProductNDC>55111-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091231</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076714</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Limited</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate.</IndicationAndUsage>
<Description>Pravastatin sodium USP is one of a class of lipid-lowering compounds, the statins, which reduce cholesterol biosynthesis. These agents are competitive inhibitors of HMG-CoA reductase, the enzyme catalyzing the early rate-limiting step in cholesterol biosynthesis, conversion of HMG-CoA to mevalonate. Pravastatin sodium USP is designated chemically as 1-Naphthalene-heptanoic acid, 1,2,6,7,8,8ahexahydro-β,δ,6-trihydroxy-2-methyl-8-(2-methyl-1-oxobutoxy)-,monosodium salt,[1S [1α(βS*,δS*),2α,6α,8β(R*),8aα]]-. Structural formula:. Pravastatin sodium USP is an white to yellowish white, hygroscopic powder. It is a relatively polar hydrophilic compound with a partition coefficient (octanol/water) of 0.59 at a pH of 7.0. It is freely soluble in water, in methanol, soluble in alcohol, very slightly soluble in acetonitrile, practically insoluble in ether, in ethyl acetate, and in chloroform. Pravastatin sodium tablets USP are available for oral administration as 10 mg, 20 mg, 40 mg or 80 mg tablets. Inactive ingredients include: croscarmellose sodium, crospovidone, magnesium stearate, meglumine, microcelac 100 (lactose monohydrate and microcrystalline cellulose), microcrystalline cellulose, opadry white YS-1-7040 (hypromellose 2910, polyethylene glycol 8000, talc, and titanium dioxide).</Description>
</NDC>
<NDC>
<NDCCode>55700-229-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55700-229-90)</PackageDescription>
<NDC11Code>55700-0229-90</NDC11Code>
<ProductNDC>55700-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-10-22</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>60760-229-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (60760-229-90)</PackageDescription>
<NDC11Code>60760-0229-90</NDC11Code>
<ProductNDC>60760-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130509</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077091</ApplicationNumber>
<LabelerName>St Marys Medical Park Pharmacy</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>61786-229-02</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (61786-229-02)</PackageDescription>
<NDC11Code>61786-0229-02</NDC11Code>
<ProductNDC>61786-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150317</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074174</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>61919-229-90</NDCCode>
<PackageDescription>90 BOTTLE in 1 BOTTLE (61919-229-90) > 120 BOTTLE in 1 BOTTLE (61919-229-72) > 60 BOTTLE in 1 BOTTLE (61919-229-60) > 50 BOTTLE in 1 BOTTLE (61919-229-50) > 30 TABLET in 1 BOTTLE (61919-229-30) </PackageDescription>
<NDC11Code>61919-0229-90</NDC11Code>
<ProductNDC>61919-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075964</ApplicationNumber>
<LabelerName>Direct Rx</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablet, USP is a centrally acting analgesic. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Molecular formula is C16H13NO2HCl. The molecular weight of tramadol hydrochloride, USP is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH7. Tramadol hydrochloride tablets, USP for oral administration contain 50 mg of tramadol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68462-229-90</NDCCode>
<PackageDescription>90 TABLET, CHEWABLE in 1 BOTTLE (68462-229-90) </PackageDescription>
<NDC11Code>68462-0229-90</NDC11Code>
<ProductNDC>68462-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079099</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine tablets for oral suspension (chewable, dispersible tablets) are indicated for. Epilepsy – adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic (PGTC) seizures., 3 generalized seizures of Lennox-Gastaut syndrome. (1.1).</IndicationAndUsage>
<Description>Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine’s chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09 g/mol. Lamotrigine, USP is a white powder and has a pKa of 5.7. Lamotrigine, USP is slightly soluble in 0.1 N hydrochloric acid, in acetone, in methanol, and in water. The structural formula is:. Lamotrigine tablets for oral suspension (chewable, dispersible tablets), 5 mg and 25 mg are supplied for oral administration. The tablets contain 5 mg (white to off-white) or 25 mg (white to off-white) of lamotrigine, USP and the following inactive ingredients: aspartame, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone K-25, sodium starch glycolate and strawberry guarana 586997 AP 0551. FDA approved dissolution test specifications differ the USP for Lamotrigine tablets for oral suspension, USP (chewable, dispersible tablets), 5 mg and 25 mg.</Description>
</NDC>
<NDC>
<NDCCode>71610-229-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71610-229-60) </PackageDescription>
<NDC11Code>71610-0229-60</NDC11Code>
<ProductNDC>71610-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203572</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lorazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam USP, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one: It is a nearly white powder almost insoluble in water. Each lorazepam tablet, USP to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam, USP. The inactive ingredients present are anhydrous lactose, magnesium stearate, microcrystalline cellulose, and polacrilin potassium.</Description>
</NDC>
<NDC>
<NDCCode>72189-229-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (72189-229-90) </PackageDescription>
<NDC11Code>72189-0229-90</NDC11Code>
<ProductNDC>72189-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090515</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Partial Onset Seizures. Levetiracetam tablet is indicated as adjunctive therapy in the treatment of partial onset seizures in adults and children 1 month of age and older with epilepsy. 1.2 Myoclonic Seizures in Patients with Juvenile Myoclonic Epilepsy. Levetiracetam tablet is indicated as adjunctive therapy in the treatment of myoclonic seizures in adults and adolescents 12 years of age and older with juvenile myoclonic epilepsy. 1.3 Primary Generalized Tonic-Clonic Seizures. Levetiracetam tablet is indicated as adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in adults and children 6 years of age and older with idiopathic generalized epilepsy.</IndicationAndUsage>
<Description>Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam USP, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam USP is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (1040 mg/mL). It is freely soluble in chloroform (653 mg/mL) and in methanol (536 mg/mL), soluble in ethanol (165 mg/mL), sparingly soluble in acetonitrile (57 mg/mL) and practically insoluble in n-hexane. (Solubility limits are expressed as mg/mL solvent.) Levetiracetam tablets, USP contain the labeled amount of levetiracetam USP. Inactive ingredients: corn starch, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate, povidone, talc and additional agents listed below: 250 mg tablets: opadry II blue (FD&C blue #2/indigo carmine aluminum lake, polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) 500 mg tablets: opadry II yellow (iron oxide yellow, polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) 750 mg tablets: opadry II orange (FD&C yellow # 6/sunset yellow FCF aluminum lake, iron oxide red, polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) 1000 mg tablets: opadry II white (polyvinyl alcohol, polyethylene glycol 3350, titanium dioxide, talc) USP Dissolution test is 4.</Description>
</NDC>
<NDC>
<NDCCode>72865-229-90</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (72865-229-90) </PackageDescription>
<NDC11Code>72865-0229-90</NDC11Code>
<ProductNDC>72865-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202882</ApplicationNumber>
<LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole Sodium Delayed-Release Tablets are indicated for:.</IndicationAndUsage>
<Description>The active ingredient in Pantoprazole Sodium Delayed-Release Tablets, USP, a PPI, is a substituted benzimidazole, 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridyl)methyl] sulfinyl]benzimidazole, sodium salt, sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C 16H 14F 2N 3NaO 4S . 1.5 H 2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium sesquihydrate, USP is a white to off-white powder. Pantoprazole sodium sesquihydrate, USP is freely soluble in water, in methanol, in dehydrated alcohol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole Sodium is supplied as a Delayed-Release Tablet, available in two strengths (20 mg and 40 mg). Each Pantoprazole Sodium Delayed-Release Tablet, USP contains 45.11 mg or 22.55 mg of pantoprazole sodium sesquihydrate, USP (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, carnauba wax, ferric oxide yellow, hydroxy propyl cellulose, hypromellose, lactose monohydrate, methacrylic acid copolymer, polysorbate 80, propylene glycol, sodium carbonate anhydrous, sodium lauryl sulfate, titanium dioxide and triethyl citrate. The tablets are imprinted with opacode black containing ammonium hydroxide, iron oxide black, propylene glycol and shellac. Pantoprazole Sodium Delayed-Release Tablets, (40 mg and 20 mg) complies with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>76420-229-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-229-90) </PackageDescription>
<NDC11Code>76420-0229-90</NDC11Code>
<ProductNDC>76420-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine</ProprietaryName>
<NonProprietaryName>Tizanidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020703</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076286</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine tablet is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine tablets should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration ( 2.1) ].</IndicationAndUsage>
<Description>Tizanidine hydrochloride USP, is a central α 2-adrenergic agonist. Tizanidine hydrochloride USP is almost white to slightly yellow crystalline powder, which is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiodiazole monohydrochloride. Tizanidine’s molecular formula is C 9H 8ClN 5S.HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine tablets USP, are supplied as 2 mg and 4 mg tablets for oral administration. Tizanidine tablets USP, contain the active ingredient, tizanidine hydrochloride USP (2.288 mg equivalent to 2 mg tizanidine base and 4.576 mg equivalent to 4 mg tizanidine base), and the inactive ingredients, anhydrous lactose, microcrystalline cellulose, colloidal silicon dioxide and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>42385-928-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42385-928-90) </PackageDescription>
<NDC11Code>42385-0928-90</NDC11Code>
<ProductNDC>42385-928</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</ProprietaryName>
<NonProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212786</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE</SubstanceName>
<StrengthNumber>600; 300; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 40 kg.</IndicationAndUsage>
<Description>Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets contain efavirenz (EFV), an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI), lamivudine (also known as 3TC), a synthetic nucleoside analogue with activity against HIV-1 and tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir), a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5'-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are for oral administration. Each film coated tablet contains efavirenz USP 600 mg, lamivudine USP 300 mg and tenofovir disoproxil fumarate 300 mg equivalent to tenofovir disoproxil 245 mg, and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz: The chemical name of efavirenz is (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is. Efavirenz USP is a white to off white powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL).Lamivudine: The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine USP is a white or almost white powder and is soluble in water.Tenofovir Disoproxil Fumarate: The chemical name of tenofovir DF is 9-[(R)-2- [[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.52. It has the following structural formula: Tenofovir DF is a white to off white powder freely soluble in dimethyl formamide, soluble in methanol and slightly soluble in water at 25°C. It has a partition coefficient (log p) of 0.75.</Description>
</NDC>
<NDC>
<NDCCode>42385-929-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42385-929-90) </PackageDescription>
<NDC11Code>42385-0929-90</NDC11Code>
<ProductNDC>42385-929</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</ProprietaryName>
<NonProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213038</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE</SubstanceName>
<StrengthNumber>400; 300; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.</IndicationAndUsage>
<Description>Efavirenz, lamivudine and tenofovir disoproxil fumarate is a fixed-dose combination tablet for oral administration. Each film coated tablet contains efavirenz USP 400 mg, lamivudine USP 300 mg and tenofovir disoproxil fumarate 300 mg equivalent to tenofovir disoproxil 245 mg. Each tablet contains the following inactive ingredients: croscarmellose sodium, ferric oxide yellow, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz:Efavirenz (EFV) is an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI). Efavirenz is chemically described as (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is. Efavirenz USP is a white to off white powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine:Lamivudine (also known as 3TC) is a synthetic nucleoside analogue with activity against HIV-1 and HBV.The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxy methyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine USP is a white or almost white powder and is soluble in water. Tenofovir Disoproxil Fumarate: Tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir) is a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5' -monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of tenofovir disoproxil fumarateis 9-[(R)-2- [[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.52. It has the following structural formula. Tenofovir disoproxil fumarate is a white to off white powder freely soluble in dimethyl formamide, soluble in methanol and slightly soluble in water at 25°C. It has a partition coefficient (log p) of 0.75.</Description>
</NDC>
<NDC>
<NDCCode>42385-929-91</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42385-929-91) </PackageDescription>
<NDC11Code>42385-0929-91</NDC11Code>
<ProductNDC>42385-929</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</ProprietaryName>
<NonProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213038</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE</SubstanceName>
<StrengthNumber>400; 300; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Efavirenz, lamivudine and tenofovir disoproxil fumarate tablets are indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.</IndicationAndUsage>
<Description>Efavirenz, lamivudine and tenofovir disoproxil fumarate is a fixed-dose combination tablet for oral administration. Each film coated tablet contains efavirenz USP 400 mg, lamivudine USP 300 mg and tenofovir disoproxil fumarate 300 mg equivalent to tenofovir disoproxil 245 mg. Each tablet contains the following inactive ingredients: croscarmellose sodium, ferric oxide yellow, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz:Efavirenz (EFV) is an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI). Efavirenz is chemically described as (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is. Efavirenz USP is a white to off white powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine:Lamivudine (also known as 3TC) is a synthetic nucleoside analogue with activity against HIV-1 and HBV.The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxy methyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine USP is a white or almost white powder and is soluble in water. Tenofovir Disoproxil Fumarate: Tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir) is a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5' -monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of tenofovir disoproxil fumarateis 9-[(R)-2- [[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.52. It has the following structural formula. Tenofovir disoproxil fumarate is a white to off white powder freely soluble in dimethyl formamide, soluble in methanol and slightly soluble in water at 25°C. It has a partition coefficient (log p) of 0.75.</Description>
</NDC>
<NDC>
<NDCCode>42385-962-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42385-962-90) </PackageDescription>
<NDC11Code>42385-0962-90</NDC11Code>
<ProductNDC>42385-962</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abacavir And Lamivudine</ProprietaryName>
<NonProprietaryName>Abacavir And Lamivudine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216332</ApplicationNumber>
<LabelerName>Laurus Labs Limited</LabelerName>
<SubstanceName>ABACAVIR SULFATE; LAMIVUDINE</SubstanceName>
<StrengthNumber>600; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A1 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abacavir and lamivudine tablets, in combination with other antiretroviral agents, are indicated for the treatment of human immunodeficiency virus type 1 (HIV-1) infection.</IndicationAndUsage>
<Description>Abacavir and Lamivudine. Abacavir and lamivudine tablets, USP contain the following 2 synthetic nucleoside analogues: abacavir (ZIAGEN, also a component of TRIZIVIR) and lamivudine (also known as EPIVIR or 3TC) with inhibitory activity against HIV-1. Abacavir and lamivudine tablets, USP are for oral administration. Each orange colored, capsule-shaped, biconvex film coated tablet contains the active ingredients 600 mg of abacavir as abacavir sulfate USP and 300 mg of lamivudine USP, and the inactive ingredients magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The tablets are coated with a film (OPADRY orange YS-1-13065-A) that is made of FD&C Yellow No.6, hypromellose, polyethylene glycol 400, polysorbate 80, and titanium dioxide. Abacavir Sulfate, USP. The chemical name of abacavir sulfate, USP is (1S, 4R)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4and a molecular weight of 670.74 g per mol. It has the following structural formula. Abacavir sulfate, USP is a white to almost white powder and is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. Dosages are expressed in terms of abacavir. Lamivudine, USP. The chemical name of lamivudine, USP is (2(1H)-Pyrimidinone,4-amino-1-[2-(hydroxymethyl)-1,3-oxathiolan-5-yl]-, (2R-cis)-. Lamivudine, USP is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine, USP has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine, USP is a white to almost white solid and is soluble in water, sparingly soluble in methanol, slightly soluble to practically insoluble in 96% ethanol and practically insoluble in acetone. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>49702-258-37</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (49702-258-37) * 90 TABLET, FILM COATED in 1 BOTTLE (49702-272-59) </PackageDescription>
<NDC11Code>49702-0258-37</NDC11Code>
<ProductNDC>49702-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triumeq Pd</ProprietaryName>
<NonProprietaryName>Abacavir Sulfate, Dolutegravir Sodium, Lamivudine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20220330</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215413</ApplicationNumber>
<LabelerName>ViiV Healthcare Company</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRIUMEQ and TRIUMEQ PD are indicated for the treatment of HIV-1 infection in adults and in pediatric patients aged at least 3 months and weighing at least 6 kg. Limitations of Use. TRIUMEQ and TRIUMEQ PD alone are not recommended in patients with resistance‑associated integrase substitutions or clinically suspected integrase strand transfer inhibitor (INSTI) resistance because the dose of dolutegravir in TRIUMEQ and TRIUMEQ PD is insufficient in these subpopulations. See full prescribing information for TIVICAY (dolutegravir).</IndicationAndUsage>
<Description>TRIUMEQ and TRIUMEQ PD. TRIUMEQ and TRIUMEQ PD contain an INSTI (dolutegravir) and 2 nucleoside analogues (abacavir and lamivudine) with inhibitory activity against HIV. Each film-coated tablet of TRIUMEQ, for oral use, contains 600 mg of abacavir (present as 702 mg of abacavir sulfate), 50 mg of dolutegravir (present as 52.6 mg of dolutegravir sodium), and 300 mg of lamivudine. The inactive ingredients of TRIUMEQ tablets include D-mannitol, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The tablet film‑coating contains the inactive ingredients iron oxide black, iron oxide red, macrogol/PEG, polyvinyl alcohol–part hydrolyzed, talc, and titanium oxide. Each film-coated tablet of TRIUMEQ PD for oral suspension contains 60 mg of abacavir (present as 70.2 mg of abacavir sulfate), 5 mg of dolutegravir (present as 5.26 mg of dolutegravir sodium), and 30 mg of lamivudine. The inactive ingredients of TRIUMEQ PD tablets include acesulfame potassium, crospovidone, mannitol, microcrystalline cellulose, povidone K29/32, silicified microcrystalline cellulose, sodium starch glycolate, sodium stearyl fumarate, strawberry cream flavor and sucralose. The tablet film-coating contains the inactive ingredients: ferric oxide yellow, macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc and titanium dioxide. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g/mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. Dolutegravir Sodium. The chemical name of dolutegravir sodium is sodium (4R,12aS)-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2H-pyrido[1',2':4,5]pyrazino[2,1-b][1,3]oxazin-7-olate. The empirical formula is C20H18F2N3NaO5 and the molecular weight is 441.36 g/mol. It has the following structural formula. Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (‑)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (‑)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g/mol. It has the following structural formula. Lamivudine is a white to off-white crystalline solid and is soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>70710-1049-9</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (70710-1049-9) </PackageDescription>
<NDC11Code>70710-1049-09</NDC11Code>
<ProductNDC>70710-1049</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abacavir And Lamivudine</ProprietaryName>
<NonProprietaryName>Abacavir And Lamivudine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190314</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208990</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ABACAVIR SULFATE; LAMIVUDINE</SubstanceName>
<StrengthNumber>600; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A1 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190314</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Abacavir and lamivudine tablets, a combination of abacavir and lamivudine, both nucleoside analogue HIV-1 reverse transcriptase inhibitors, are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection. (1).</IndicationAndUsage>
<Description>Abacavir and Lamivudine Tablets, USP. Abacavir and lamivudine tablets contain the following 2 synthetic nucleoside analogues: abacavir sulfate and lamivudine with inhibitory activity against HIV-1. Each tablet contains 600 mg of abacavir (equivalent to 702.00 mg abacavir sulfate, USP) and 300 mg of lamivudine, USP and the inactive ingredients: croscarmellose sodium, D&C yellow #10 aluminum lake, FD&C red #40 aluminum lake, hypromellose, iron oxide yellow, magnesium stearate, microcrystalline cellulose polysorbate 80, polyethylene glycol, povidone K-30 and titanium dioxide. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6 (cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). Abacavir sulfate is the enantiomer with 1S, 4R absolute configuration on the cyclopentene ring. It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g per mol. It has the following structural formula. Abacavir sulfate, USP is white to almost white powder. It is soluble in water. In vivo, abacavir sulfate dissociates to its free base, abacavir. All dosages for abacavir sulfate are expressed in terms of abacavir. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3 oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g per mol. It has the following structural formula. Lamivudine, USP is a white to off-white solid, melts at about 176°C. It is soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>71205-001-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-001-90) </PackageDescription>
<NDC11Code>71205-0001-90</NDC11Code>
<ProductNDC>71205-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088628</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia,, 2 Have not been tolerated, or are not expected to be tolerated.</IndicationAndUsage>
<Description>Acetaminophen and codeine phosphate are supplied in tablet form for oral administration. Acetaminophen, USP, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C8H9NO2 M.W. 151.16. Codeine phosphate, USP, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. C18H21NO3H3PO4½H2O M.W. 406.37. Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/15 mg) contains: 1 Acetaminophen, USP...........................300 mgCodeine Phosphate, USP.......................15 mg.</Description>
</NDC>
<NDC>
<NDCCode>71205-003-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-003-90) </PackageDescription>
<NDC11Code>71205-0003-90</NDC11Code>
<ProductNDC>71205-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate</ProprietaryName>
<NonProprietaryName>Metoprolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202871</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>METOPROLOL TARTRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypertension Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris Metoprolol tartrate tablets are indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol. Oral metoprolol therapy can be initiated after intravenous metoprolol therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS.</IndicationAndUsage>
<Description>Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25 mg, 50 mg and 100 mg tablets for oral administration. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-2-methoxyethyl)phenoxy]-2-propanol L-(+)-tartrate (2:1) salt, its structural formula is. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, povidone, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate hypromellose, titanium dioxide and polyethylene glycol. In addition, the 50 mg product contains D&C Red No. 30 Aluminum Lake and the 100 mg product contains FD&C Blue No. 2 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake as coloring agents.</Description>
</NDC>
<NDC>
<NDCCode>71205-004-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-004-90) </PackageDescription>
<NDC11Code>71205-0004-90</NDC11Code>
<ProductNDC>71205-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091519</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 320</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160 mmHg/100 mmHg has about a 41% likelihood of achieving a goal of less than 140 mmHg (systolic) and 60% likelihood of achieving less than 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, USP a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide, USP is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the film-coated tablets are microcrystalline cellulose, croscarmellose sodium, sodium dodecyl sulphate, hydroxypropylcellulose, silicified microcrystalline cellulose, low substituted hydroxypropylcellulose, magnesium stearate, polyvinyl alcohol-part. hydrolyzed, titanium dioxide, talc, polyethylene glycol, and iron oxide yellow. In addition, 80 mg /12.5 mg and 160 mg/12.5 mg tablets contain FD&C red#40 /allura red AC aluminum lake, 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg and 320 mg/12.5 mg tablets contain iron oxide black, and 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg tablets contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>71205-005-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71205-005-90) </PackageDescription>
<NDC11Code>71205-0005-90</NDC11Code>
<ProductNDC>71205-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208706</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major Depressive Disorder [see Clinical Studies (14.1)]. , 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)]. , 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)]. , 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].</IndicationAndUsage>
<Description>Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Blue No. 2, titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending.</Description>
</NDC>
<NDC>
<NDCCode>71205-007-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-007-90) </PackageDescription>
<NDC11Code>71205-0007-90</NDC11Code>
<ProductNDC>71205-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ranitidine</ProprietaryName>
<ProprietaryNameSuffix>Immediate Release</ProprietaryNameSuffix>
<NonProprietaryName>Ranitidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205512</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>RANITIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71205-008-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-008-90) </PackageDescription>
<NDC11Code>71205-0008-90</NDC11Code>
<ProductNDC>71205-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206434</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pediatric use information for patients 7 to 17 years of age is approved for AstraZeneca’s CRESTOR (rosuvastatin calcium) tablets. However, due to AstraZeneca’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
<Description>Rosuvastatin calcium is a synthetic lipid-lowering agent for oral administration. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin calcium tablets for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: For 5 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, and ferric oxide yellow. For 10, 20 and 40 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, FD & C yellow No. 6, FD & C red No. 40, and FD & C blue No.1.</Description>
</NDC>
<NDC>
<NDCCode>71205-015-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-015-90) </PackageDescription>
<NDC11Code>71205-0015-90</NDC11Code>
<ProductNDC>71205-015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
</NDCList>