{
"NDC": [
{
"NDCCode": "71205-258-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-258-90) ",
"NDC11Code": "71205-0258-90",
"ProductNDC": "71205-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203145",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "160; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2022-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190501",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets, USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets, USP may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets, USP may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets, USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)]provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets, USP compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets, USP 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8 For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets, USP rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide."
},
{
"NDCCode": "71205-258-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (71205-258-30) ",
"NDC11Code": "71205-0258-30",
"ProductNDC": "71205-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203145",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "160; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2022-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190501",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets, USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets, USP may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets, USP may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets, USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)]provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets, USP compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets, USP 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8 For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets, USP rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide."
},
{
"NDCCode": "71205-258-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (71205-258-60) ",
"NDC11Code": "71205-0258-60",
"ProductNDC": "71205-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130419",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203145",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "160; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2022-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190501",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets, USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets, USP may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets, USP may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets, USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)]provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets, USP compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets, USP 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8 For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets, USP rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide."
},
{
"NDCCode": "49702-258-37",
"PackageDescription": "1 KIT in 1 CARTON (49702-258-37) * 90 TABLET, FILM COATED in 1 BOTTLE (49702-272-59) ",
"NDC11Code": "49702-0258-37",
"ProductNDC": "49702-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triumeq Pd",
"NonProprietaryName": "Abacavir Sulfate, Dolutegravir Sodium, Lamivudine",
"DosageFormName": "KIT",
"StartMarketingDate": "20220330",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215413",
"LabelerName": "ViiV Healthcare Company",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220330",
"SamplePackage": "N",
"IndicationAndUsage": "TRIUMEQ and TRIUMEQ PD are indicated for the treatment of HIV-1 infection in adults and in pediatric patients aged at least 3 months and weighing at least 6 kg. Limitations of Use. TRIUMEQ and TRIUMEQ PD alone are not recommended in patients with resistance‑associated integrase substitutions or clinically suspected integrase strand transfer inhibitor (INSTI) resistance because the dose of dolutegravir in TRIUMEQ and TRIUMEQ PD is insufficient in these subpopulations. See full prescribing information for TIVICAY (dolutegravir).",
"Description": "TRIUMEQ and TRIUMEQ PD. TRIUMEQ and TRIUMEQ PD contain an INSTI (dolutegravir) and 2 nucleoside analogues (abacavir and lamivudine) with inhibitory activity against HIV. Each film-coated tablet of TRIUMEQ, for oral use, contains 600 mg of abacavir (present as 702 mg of abacavir sulfate), 50 mg of dolutegravir (present as 52.6 mg of dolutegravir sodium), and 300 mg of lamivudine. The inactive ingredients of TRIUMEQ tablets include D-mannitol, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The tablet film‑coating contains the inactive ingredients iron oxide black, iron oxide red, macrogol/PEG, polyvinyl alcohol–part hydrolyzed, talc, and titanium oxide. Each film-coated tablet of TRIUMEQ PD for oral suspension contains 60 mg of abacavir (present as 70.2 mg of abacavir sulfate), 5 mg of dolutegravir (present as 5.26 mg of dolutegravir sodium), and 30 mg of lamivudine. The inactive ingredients of TRIUMEQ PD tablets include acesulfame potassium, crospovidone, mannitol, microcrystalline cellulose, povidone K29/32, silicified microcrystalline cellulose, sodium starch glycolate, sodium stearyl fumarate, strawberry cream flavor and sucralose. The tablet film-coating contains the inactive ingredients: ferric oxide yellow, macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc and titanium dioxide. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g/mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. Dolutegravir Sodium. The chemical name of dolutegravir sodium is sodium (4R,12aS)-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2H-pyrido[1',2':4,5]pyrazino[2,1-b][1,3]oxazin-7-olate. The empirical formula is C20H18F2N3NaO5 and the molecular weight is 441.36 g/mol. It has the following structural formula. Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (‑)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (‑)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g/mol. It has the following structural formula. Lamivudine is a white to off-white crystalline solid and is soluble in water."
},
{
"NDCCode": "55111-258-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (55111-258-90) ",
"NDC11Code": "55111-0258-90",
"ProductNDC": "55111-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ziprasidone",
"NonProprietaryName": "Ziprasidone",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120302",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077565",
"LabelerName": "Dr. Reddy's Laboratories Limited",
"SubstanceName": "ZIPRASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120302",
"SamplePackage": "N",
"IndicationAndUsage": "Ziprasidone capsules are indicated for the treatment of schizophrenia, as monotherapy for the acute treatment of bipolar manic or mixed episodes, and as an adjunct to lithium or valproate for the maintenance treatment of bipolar disorder. When deciding among the alternative treatments available for the condition needing treatment, the prescriber should consider the finding of ziprasidone’s greater capacity to prolong the QT/QTc interval compared to several other antipsychotic drugs [see Warnings and Precautions (5.3)]. Prolongation of the QTc interval is associated in some other drugs with the ability to cause torsade de pointes-type arrhythmia, a potentially fatal polymorphic ventricular tachycardia, and sudden death. In many cases this would lead to the conclusion that other drugs should be tried first. Whether ziprasidone will cause torsade de pointes or increase the rate of sudden death is not yet known [see Warnings and Precautions (5.3)]. Schizophrenia: 1 Ziprasidone capsules are indicated for the treatment of schizophrenia in adults [see Clinical Studies (14.1)].",
"Description": "Ziprasidone capsules, USP contains the active moiety, ziprasidone in the form of ziprasidone hydrochloride, USP salt. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one. The molecular formula of C21H21ClN4OS (free base of ziprasidone) represents the following structural formula. Ziprasidone capsules, USP contain a hydrochloride salt of ziprasidone. Chemically, ziprasidone hydrochloride USP is 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one, hydrochloride. The molecular formula is C21H21ClN4OS · HCl and its molecular weight is 449.40. Ziprasidone hydrochloride USP is a light pink to pink colored powder. Ziprasidone capsules, USP are supplied for oral administration in 20 mg, 40 mg, 60 mg, and 80 mg capsules. Ziprasidone capsules, USP contain ziprasidone hydrochloride USP, anhydrous lactose, magnesium stearate, polysorbate 80, povidone (PVK-30), pregelatinized starch and silicon dioxide. The components of the capsule shells are FD&C Blue #1, FD&C Red #3, gelatin, red iron oxide and titanium dioxide. The capsule shells are imprinted with black ink. The components of black ink (Black SW-9008/SW-9009) are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. Ziprasidone capsules meets USP Dissolution Test 3."
},
{
"NDCCode": "60760-258-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (60760-258-90)",
"NDC11Code": "60760-0258-90",
"ProductNDC": "60760-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075805",
"LabelerName": "St Marys Medical Park Pharmacy",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-01-04",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "61919-258-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (61919-258-90) ",
"NDC11Code": "61919-0258-90",
"ProductNDC": "61919-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091650",
"LabelerName": "Direct_Rx",
"SubstanceName": "ATORVASTATIN CALCIUM TRIHYDRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20150101",
"SamplePackage": "N",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.1.1 Prevention of Cardiovascular Disease In adult patients without clinically evident coronary heart disease, but with multiple risk factors for coronary heart disease such as age, smoking, hypertension, low HDL-C, or a family history of early coronary heart disease, atorvastatin calcium tablets are indicated to: Reduce the risk of myocardial infarction Reduce the risk of stroke Reduce the risk for revascularization procedures and anginaIn patients with type 2 diabetes, and without clinically evident coronary heart disease, but with multiple risk factors for coronary heart disease such as retinopathy, albuminuria, smoking, or hypertension, atorvastatin calcium tablets are indicated to:Reduce the risk of myocardial infarction Reduce the risk of strokeIn patients with clinically evident coronary heart disease, atorvastatin calcium tablets are indicated to:Reduce the risk of non-fatal myocardial infarction Reduce the risk of fatal and non-fatal stroke Reduce the risk for revascularization procedures Reduce the risk of hospitalization for CHF Reduce the risk of angina1.2 Hyperlipidemia Atorvastatin calcium tablets are indicated:As an adjunct to diet to reduce elevated total-C, LDL-C, apo B, and TG levels and to increase HDL-C in patients with primary hypercholesterolemia (heterozygous familial and nonfamilial) and mixed dyslipidemia (Fredrickson Types IIa and IIb);As an adjunct to diet for the treatment of patients with elevated serum TG levels (Fredrickson Type IV);For the treatment of patients with primary dysbetalipoproteinemia (Fredrickson Type III) who do not respond adequately to diet;To reduce total-C and LDL-C in patients with homozygous familial hypercholesterolemia as an adjunct to other lipid-lowering treatments (e.g., LDL apheresis) or if such treatments are unavailable;As an adjunct to diet to reduce total-C, LDL-C, and apo B levels in boys and postmenarchal girls, 10 to 17 years of age, with heterozygous familial hypercholesterolemia if after an adequate trial of diet therapy the following findings are present: a. LDL-C remains ≥ 190 mg/dL or b. LDL-C remains ≥ 160 mg/dL and:there is a positive family history of premature cardiovascular disease ortwo or more other CVD risk factors are present in the pediatric patient 1.3 Limitations of Use Atorvastatin calcium tablets have not been studied in conditions where the major lipoprotein abnormality is elevation of chylomicrons (Fredrickson Types I and V).",
"Description": "Atorvastatin calcium is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). The molecular formula of atorvastatin calcium is C66H68CaF2N4O10and its molecular weight is 1155.36. Its structural formula is. structure. Atorvastatin calcium is a white to off-white colored powder free from visible extraneous matter. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral administration contain 10, 20 and 40 mg atorvastatin and the following inactive ingredients: Basic butylated methacrylate copolymer, crospovidone, hydroxy propyl cellulose, lactose monohydrate, magnesium stearate, methanol, microcrystalline cellulose, sodium bicarbonate and sodium lauryl sulphate. The tablet coating contains isopropyl alcohol, methylene chloride and coloring agent opadry OY-58900 white contains polyethylene glycol, titanium dioxide and hypromellose."
},
{
"NDCCode": "63187-258-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (63187-258-90) ",
"NDC11Code": "63187-0258-90",
"ProductNDC": "63187-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200294",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Active",
"LastUpdate": "2021-01-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"Description": "Chemically, meclizine hydrochloride is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. C25H27CIN2·2HCl·H20 M.W. 481.89. Meclizine hydrochloride tablets, USP are available in two different strengths, 12.5 mg and 25 mg. Inactive ingredients: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium and magnesium stearate. The 12.5 mg tablet also contains FD&C Blue #1 Aluminum Lake."
},
{
"NDCCode": "67877-258-90",
"PackageDescription": "9 BOTTLE in 1 CARTON (67877-258-90) / 10 TABLET, CHEWABLE in 1 BOTTLE (67877-258-11) ",
"NDC11Code": "67877-0258-90",
"ProductNDC": "67877-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lanthanum Carbonate",
"NonProprietaryName": "Lanthanum Carbonate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20250510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202329",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "LANTHANUM CARBONATE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250510",
"SamplePackage": "N",
"IndicationAndUsage": "Lanthanum carbonate is a phosphate binder indicated to reduce serum phosphate in patients with end-stage renal disease (ESRD). Management of elevated serum phosphorus levels in patients with ESRD usually includes all of the following: reduction in dietary intake of phosphate, removal of phosphate by dialysis, and reduction of intestinal phosphate absorption with phosphate binders.",
"Description": "Lanthanum carbonate chewable tablet contains lanthanum carbonate with molecular formula La2(CO3)3 xH2O (where x=8 moles of water) and molecular weight 457.8 (anhydrous mass). Lanthanum carbonate octahydrate is insoluble in water and soluble in acids. The molecular weight of lanthanum carbonate octahydrate is 601.95 g/mol. Each white to off-white, round flat with a beveled edge chewable tablet contains lanthanum carbonate hydrate equivalent to 500, 750, or 1,000 mg of elemental lanthanum and the following inactive ingredients: maltitol, crospovidone and sodium stearyl fumarate. The chemical structure of lanthanum carbonate octahydrate is."
},
{
"NDCCode": "68225-258-00",
"PackageDescription": "90 VIAL in 1 BOX (68225-258-00) / 10 mL in 1 VIAL",
"NDC11Code": "68225-0258-00",
"ProductNDC": "68225-258",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Mogamulizumab-kpkc",
"DosageFormName": "INJECTION",
"StartMarketingDate": "20241026",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Patheon Italia S.p.A.",
"SubstanceName": "MOGAMULIZUMAB",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Status": "Unfinished",
"LastUpdate": "2025-05-07",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "26-OCT-24"
},
{
"NDCCode": "69452-258-19",
"PackageDescription": "90 CAPSULE in 1 BOTTLE, PLASTIC (69452-258-19) ",
"NDC11Code": "69452-0258-19",
"ProductNDC": "69452-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Droxidopa",
"NonProprietaryName": "Droxidopa",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20211001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213033",
"LabelerName": "Bionpharma Inc.",
"SubstanceName": "DROXIDOPA",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Catecholamines [CS], Increased Blood Pressure [PE]",
"Status": "Active",
"LastUpdate": "2021-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211001",
"SamplePackage": "N",
"IndicationAndUsage": "Droxidopa capsule is indicated for the treatment of orthostatic dizziness, lightheadedness, or the “feeling that you are about to black out” in adult patients with symptomatic neurogenic orthostatic hypotension (nOH) caused by primary autonomic failure (Parkinson's disease [PD], multiple system atrophy, and pure autonomic failure), dopamine beta-hydroxylase deficiency, and non-diabetic autonomic neuropathy. Effectiveness beyond 2 weeks of treatment has not been established. The continued effectiveness of Droxidopa capsule should be assessed periodically.",
"Description": "Droxidopa capsules contain droxidopa, which is a synthetic amino acid precursor of norepinephrine, for oral administration. Chemically, droxidopa is (–)-threo-3-(3,4-Dihydroxyphenyl)-L-serine. It has the following structural formula. Droxidopa is an odorless, tasteless, white to off-white crystals or crystalline powder. It is slightly soluble in water, and practically insoluble in methanol, glacial acetic acid, ethanol, acetone, ether, and chloroform. It is soluble in dilute hydrochloric acid. It has a molecular weight of 213.19 and a molecular formula of C 9H 11NO 5. Droxidopa capsules also contain the following inactive ingredients: mannitol, corn starch, and magnesium stearate. The capsule shell is printed with black ink. The black inks contain shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. The capsule shell contains the following inactive ingredients: 100 mg – gelatin, titanium dioxide, FD&C Blue No. 2, black iron oxide, red iron oxide, water and SLS; 200 mg – gelatin, titanium dioxide, FD&C Blue No. 2, black iron oxide, iron oxide yellow, water and SLS; 300 mg – gelatin, titanium dioxide, FD&C Blue No. 1, FD&C Yellow No.,5 (tartrazine), FD&C Red No. 40, water and SLS. Droxidopa capsules differ in size and color by strength [see Dosage Forms and Strengths (3)]."
},
{
"NDCCode": "71610-258-60",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71610-258-60) ",
"NDC11Code": "71610-0258-60",
"ProductNDC": "71610-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110805",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090700",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-06-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil hydrochloride extended-release tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.",
"Description": "Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below. C27H38N2O4·HCl..........M.W. 491.06. Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1."
},
{
"NDCCode": "72603-258-03",
"PackageDescription": "3 BOTTLE in 1 CARTON (72603-258-03) / 90 TABLET, FILM COATED in 1 BOTTLE (72603-258-01) ",
"NDC11Code": "72603-0258-03",
"ProductNDC": "72603-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pirfenidone",
"NonProprietaryName": "Pirfenidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212772",
"LabelerName": "Northstar Rx LLC",
"SubstanceName": "PIRFENIDONE",
"StrengthNumber": "267",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Pyridone [EPC], Pyridones [CS]",
"Status": "Active",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240701",
"SamplePackage": "N",
"IndicationAndUsage": "Pirfenidone tablet is indicated for the treatment of idiopathic pulmonary fibrosis (IPF).",
"Description": "Pirfenidone belongs to the chemical class of pyridone. Pirfenidone is available as film-coated tablets containing 267 mg and 801 mg pirfenidone. Pirfenidone has a molecular formula of C12H11NO and a molecular weight of 185.23. Pirfenidone has the following structural formula, which has been referred to as 5-methyl-1-phenyl-2-1(H)-pyridone or 5-methyl-1-phenyl-2-(1H)-pyridone. Pirfenidone is a white to pale yellow, non-hygroscopic powder. It is freely soluble in dichloromethane, methanol, soluble in ethanol and practically insoluble in water. The melting point is approximately 109°C.Pirfenidone tablets contain pirfenidone and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, titanium dioxide, macrogol (polyethylene glycol) and talc."
},
{
"NDCCode": "72865-258-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (72865-258-90) ",
"NDC11Code": "72865-0258-90",
"ProductNDC": "72865-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Torsemide",
"NonProprietaryName": "Torsemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079234",
"LabelerName": "XLCare Pharmaceuticals Inc.",
"SubstanceName": "TORSEMIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240910",
"SamplePackage": "N",
"IndicationAndUsage": "Torsemide tablets are a loop diuretic indicated for: the treatment of edema associated with heart failure, renal disease or hepatic disease. (1.1) the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).",
"Description": "Torsemide is a diuretic of the pyridine-sulfonylurea class. Its chemical name is 1-isopropyl-3-[(4-m-toluidino-3-pyridyl) sulfonyl]urea and its structural formula is. Its molecular formula is C 16H 20N 4O 3S, its pKa is 6.42, and its molecular weight is 348.43. Torsemide USP is a white to off-white crystalline powder. The tablets for oral administration also contain crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone."
},
{
"NDCCode": "75834-258-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (75834-258-90) ",
"NDC11Code": "75834-0258-90",
"ProductNDC": "75834-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atorvastatin Calcium",
"NonProprietaryName": "Atorvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200826",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213853",
"LabelerName": "NIVAGEN PHARMACEUTICALS, INC.",
"SubstanceName": "ATORVASTATIN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200826",
"SamplePackage": "N",
"IndicationAndUsage": "Atorvastatin calcium tablets are indicated. : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemiaHypertriglyceridemia.",
"Description": "Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is C 66H 68CaF 2N 4O 10.3H 2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.359 mg, 20.718 mg, 41.436 mg, or 82.872 mg atorvastatin calcium trihydrate) and the following inactive ingredients: Croscarmellose sodium, NF; Hydroxy propyl cellulose, NF; , Lactose monohydrate, NF; Magnesium stearate, NF; , Microcrystalline cellulose, NF; Polysorbate 80, NF; Precipitated calcium carbonate, NF; Hypromellose; Macrogol; Talc and Titanium dioxide."
},
{
"NDCCode": "76420-258-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-258-90) ",
"NDC11Code": "76420-0258-90",
"ProductNDC": "76420-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methocarbamol",
"NonProprietaryName": "Methocarbamol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040489",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "METHOCARBAMOL",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2024-06-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190815",
"SamplePackage": "N",
"IndicationAndUsage": "Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.",
"Description": "Methocarbamol Tablets, USP, 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C 11H 15NO 5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "55700-258-30",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (55700-258-30)",
"NDC11Code": "55700-0258-30",
"ProductNDC": "55700-258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nifedipine",
"NonProprietaryName": "Nifedipine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130802",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076070",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "NIFEDIPINE",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-11-05",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "55910-012-15",
"PackageDescription": "258 g in 1 CAN (55910-012-15) ",
"NDC11Code": "55910-0012-15",
"ProductNDC": "55910-012",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunscreen",
"NonProprietaryName": "Avobenzone, Homosalate,otisalate, Octocrylene",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191001",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "OLD EAST MAIN CO",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "90; 225; 250; 1000",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2024-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other skin protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "68025-077-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68025-077-90) ",
"NDC11Code": "68025-0077-90",
"ProductNDC": "68025-077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Osmolex Er",
"NonProprietaryName": "Amantadine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209410",
"LabelerName": "Vertical Pharmaceuticals, LLC",
"SubstanceName": "AMANTADINE",
"StrengthNumber": "258",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Influenza A M2 Protein Inhibitor [EPC],M2 Protein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N"
},
{
"NDCCode": "71205-001-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-001-90) ",
"NDC11Code": "71205-0001-90",
"ProductNDC": "71205-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088628",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia,, 2 Have not been tolerated, or are not expected to be tolerated.",
"Description": "Acetaminophen and codeine phosphate are supplied in tablet form for oral administration. Acetaminophen, USP, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C8H9NO2 M.W. 151.16. Codeine phosphate, USP, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. C18H21NO3H3PO4½H2O M.W. 406.37. Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/15 mg) contains: 1 Acetaminophen, USP...........................300 mgCodeine Phosphate, USP.......................15 mg."
},
{
"NDCCode": "71205-003-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-003-90) ",
"NDC11Code": "71205-0003-90",
"ProductNDC": "71205-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate",
"NonProprietaryName": "Metoprolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202871",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "METOPROLOL TARTRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Hypertension Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris Metoprolol tartrate tablets are indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol. Oral metoprolol therapy can be initiated after intravenous metoprolol therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS.",
"Description": "Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25 mg, 50 mg and 100 mg tablets for oral administration. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-2-methoxyethyl)phenoxy]-2-propanol L-(+)-tartrate (2:1) salt, its structural formula is. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, povidone, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate hypromellose, titanium dioxide and polyethylene glycol. In addition, the 50 mg product contains D&C Red No. 30 Aluminum Lake and the 100 mg product contains FD&C Blue No. 2 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake as coloring agents."
},
{
"NDCCode": "71205-004-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-004-90) ",
"NDC11Code": "71205-0004-90",
"ProductNDC": "71205-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091519",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 320",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160 mmHg/100 mmHg has about a 41% likelihood of achieving a goal of less than 140 mmHg (systolic) and 60% likelihood of achieving less than 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, USP a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide, USP is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the film-coated tablets are microcrystalline cellulose, croscarmellose sodium, sodium dodecyl sulphate, hydroxypropylcellulose, silicified microcrystalline cellulose, low substituted hydroxypropylcellulose, magnesium stearate, polyvinyl alcohol-part. hydrolyzed, titanium dioxide, talc, polyethylene glycol, and iron oxide yellow. In addition, 80 mg /12.5 mg and 160 mg/12.5 mg tablets contain FD&C red#40 /allura red AC aluminum lake, 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg and 320 mg/12.5 mg tablets contain iron oxide black, and 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg tablets contain iron oxide red."
},
{
"NDCCode": "71205-005-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71205-005-90) ",
"NDC11Code": "71205-0005-90",
"ProductNDC": "71205-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208706",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major Depressive Disorder [see Clinical Studies (14.1)]. , 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)]. , 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)]. , 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].",
"Description": "Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Blue No. 2, titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending."
},
{
"NDCCode": "71205-007-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-007-90) ",
"NDC11Code": "71205-0007-90",
"ProductNDC": "71205-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ranitidine",
"ProprietaryNameSuffix": "Immediate Release",
"NonProprietaryName": "Ranitidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205512",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "RANITIDINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N"
},
{
"NDCCode": "71205-008-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-008-90) ",
"NDC11Code": "71205-0008-90",
"ProductNDC": "71205-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206434",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Pediatric use information for patients 7 to 17 years of age is approved for AstraZeneca’s CRESTOR (rosuvastatin calcium) tablets. However, due to AstraZeneca’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.",
"Description": "Rosuvastatin calcium is a synthetic lipid-lowering agent for oral administration. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin calcium tablets for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: For 5 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, and ferric oxide yellow. For 10, 20 and 40 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, FD & C yellow No. 6, FD & C red No. 40, and FD & C blue No.1."
},
{
"NDCCode": "71205-015-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-015-90) ",
"NDC11Code": "71205-0015-90",
"ProductNDC": "71205-015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2019-11-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "71205-016-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-016-90) ",
"NDC11Code": "71205-0016-90",
"ProductNDC": "71205-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metaxalone",
"NonProprietaryName": "Metaxalone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207466",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "METAXALONE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Metaxalone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomforts associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Metaxalone does not directly relax tense skeletal muscles in man.",
"Description": "Metaxalone Tablets, USP are available as an 800 mg, capsule shaped, scored pink tablet.Chemically, metaxalone, USP is 5-[(3,5-dimethylphenoxy)methyl]-2-oxazolidinone. The empirical formula is C12H15NO3, which corresponds to a molecular weight of 221.25. The structural formula is. Metaxalone, USP is a white to almost white, crystalline powder freely soluble in dichloromethane, soluble in methanol, sparingly soluble in ethanol and ethyl acetate, slightly soluble in toluene and isopropanol, insoluble in water and n-hexane. Each tablet contains 800 mg metaxalone, USP and the following inactive ingredients: alginic acid, corn starch, ferric oxide red, copovidone, magnesium stearate, povidone, pregelatinized starch, sodium alginate."
},
{
"NDCCode": "71205-017-90",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71205-017-90) ",
"NDC11Code": "71205-0017-90",
"ProductNDC": "71205-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078906",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-11-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil hydrochloride extended-release tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.",
"Description": "Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below. C27H38N2O4·HCl..........M.W. 491.06. Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1."
},
{
"NDCCode": "71205-018-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-018-90) ",
"NDC11Code": "71205-0018-90",
"ProductNDC": "71205-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020301",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021342",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Levothyroxine sodium is used for the following indications. Hypothyroidism – As replacement or supplemental therapy in congenital or acquired hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. Specific indications include: primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) hypothyroidism and subclinical hypothyroidism. Primary hypothyroidism may result from functional deficiency, primary atrophy, partial or total congenital absence of the thyroid gland, or from the effects of surgery, radiation, or drugs, with or without the presence of goiter. Pituitary TSH Suppression – In the treatment or prevention of various types of euthyroid goiters (see WARNINGS and PRECAUTIONS), including thyroid nodules (see WARNINGS and PRECAUTIONS), subacute or chronic lymphocytic thyroiditis (Hashimoto’s thyroiditis), multinodular goiter (see WARNINGS and PRECAUTIONS) and, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer.",
"Description": "Levothyroxine sodium tablets, USP contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt [levothyroxine (T 4) sodium]. Synthetic T 4 is identical to that produced in the human thyroid gland. Levothyroxine (T 4) sodium has an empirical formula of C 15H 10I 4N NaO 4 x H 2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:."
},
{
"NDCCode": "71205-019-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71205-019-90) ",
"NDC11Code": "71205-0019-90",
"ProductNDC": "71205-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methocarbamol",
"NonProprietaryName": "Methocarbamol",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150713",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200958",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "METHOCARBAMOL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180402",
"SamplePackage": "N",
"IndicationAndUsage": "Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.",
"Description": "Methocarbamol Tablets USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Methocarbamol tablet, 500 mg is available as an orange, film coated, round convex tablet containing 500 mg of methocarbamol, USP for oral administration. The inactive ingredients present are microcrystalline cellulose, croscarmellose sodium, FD&C Yellow 6 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, triacetin, titanium dioxide. Methocarbamol tablet, 750 mg is available as a yellow, film coated, modified capsule shaped tablet containing 750 mg of methocarbamol, USP for oral administration. The inactive ingredients present are microcrystalline cellulose, croscarmellose sodium, iron oxide yellow, iron oxide red, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, triacetin, titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>71205-258-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-258-90) </PackageDescription>
<NDC11Code>71205-0258-90</NDC11Code>
<ProductNDC>71205-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203145</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>160; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets, USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets, USP may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets, USP may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets, USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)]provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets, USP compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets, USP 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8 For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets, USP rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71205-258-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71205-258-30) </PackageDescription>
<NDC11Code>71205-0258-30</NDC11Code>
<ProductNDC>71205-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203145</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>160; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets, USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets, USP may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets, USP may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets, USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)]provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets, USP compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets, USP 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8 For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets, USP rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71205-258-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (71205-258-60) </PackageDescription>
<NDC11Code>71205-0258-60</NDC11Code>
<ProductNDC>71205-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130419</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203145</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>160; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets, USP may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets, USP may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets, USP may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets, USP as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)]provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets, USP compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets, USP 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. Figure 1: Probability of Achieving Systolic Blood Pressure <140 mmHg at Week 8. Figure 2: Probability of Achieving Diastolic Blood Pressure <90 mmHg at Week 8. Figure 3: Probability of Achieving Systolic Blood Pressure <130 mmHg at Week 8. Figure 4: Probability of Achieving Diastolic Blood Pressure <80 mmHg at Week 8 For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets, USP rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP, are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, iron oxides, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>49702-258-37</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (49702-258-37) * 90 TABLET, FILM COATED in 1 BOTTLE (49702-272-59) </PackageDescription>
<NDC11Code>49702-0258-37</NDC11Code>
<ProductNDC>49702-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triumeq Pd</ProprietaryName>
<NonProprietaryName>Abacavir Sulfate, Dolutegravir Sodium, Lamivudine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20220330</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215413</ApplicationNumber>
<LabelerName>ViiV Healthcare Company</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRIUMEQ and TRIUMEQ PD are indicated for the treatment of HIV-1 infection in adults and in pediatric patients aged at least 3 months and weighing at least 6 kg. Limitations of Use. TRIUMEQ and TRIUMEQ PD alone are not recommended in patients with resistance‑associated integrase substitutions or clinically suspected integrase strand transfer inhibitor (INSTI) resistance because the dose of dolutegravir in TRIUMEQ and TRIUMEQ PD is insufficient in these subpopulations. See full prescribing information for TIVICAY (dolutegravir).</IndicationAndUsage>
<Description>TRIUMEQ and TRIUMEQ PD. TRIUMEQ and TRIUMEQ PD contain an INSTI (dolutegravir) and 2 nucleoside analogues (abacavir and lamivudine) with inhibitory activity against HIV. Each film-coated tablet of TRIUMEQ, for oral use, contains 600 mg of abacavir (present as 702 mg of abacavir sulfate), 50 mg of dolutegravir (present as 52.6 mg of dolutegravir sodium), and 300 mg of lamivudine. The inactive ingredients of TRIUMEQ tablets include D-mannitol, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. The tablet film‑coating contains the inactive ingredients iron oxide black, iron oxide red, macrogol/PEG, polyvinyl alcohol–part hydrolyzed, talc, and titanium oxide. Each film-coated tablet of TRIUMEQ PD for oral suspension contains 60 mg of abacavir (present as 70.2 mg of abacavir sulfate), 5 mg of dolutegravir (present as 5.26 mg of dolutegravir sodium), and 30 mg of lamivudine. The inactive ingredients of TRIUMEQ PD tablets include acesulfame potassium, crospovidone, mannitol, microcrystalline cellulose, povidone K29/32, silicified microcrystalline cellulose, sodium starch glycolate, sodium stearyl fumarate, strawberry cream flavor and sucralose. The tablet film-coating contains the inactive ingredients: ferric oxide yellow, macrogol/PEG, polyvinyl alcohol-part hydrolyzed, talc and titanium dioxide. Abacavir Sulfate. The chemical name of abacavir sulfate is (1S,cis)-4-[2-amino-6-(cyclopropylamino)-9H-purin-9-yl]-2-cyclopentene-1-methanol sulfate (salt) (2:1). It has a molecular formula of (C14H18N6O)2H2SO4 and a molecular weight of 670.76 g/mol. It has the following structural formula. Abacavir sulfate is a white to off-white solid and is soluble in water. Dolutegravir Sodium. The chemical name of dolutegravir sodium is sodium (4R,12aS)-9-{[(2,4-difluorophenyl)methyl]carbamoyl}-4-methyl-6,8-dioxo-3,4,6,8,12,12a-hexahydro-2H-pyrido[1',2':4,5]pyrazino[2,1-b][1,3]oxazin-7-olate. The empirical formula is C20H18F2N3NaO5 and the molecular weight is 441.36 g/mol. It has the following structural formula. Dolutegravir sodium is a white to light yellow powder and is slightly soluble in water. Lamivudine. The chemical name of lamivudine is (2R,cis)-4-amino-1-(2-hydroxymethyl-1,3-oxathiolan-5-yl)-(1H)-pyrimidin-2-one. Lamivudine is the (‑)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (‑)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.3 g/mol. It has the following structural formula. Lamivudine is a white to off-white crystalline solid and is soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>55111-258-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (55111-258-90) </PackageDescription>
<NDC11Code>55111-0258-90</NDC11Code>
<ProductNDC>55111-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ziprasidone</ProprietaryName>
<NonProprietaryName>Ziprasidone</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120302</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077565</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
<SubstanceName>ZIPRASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ziprasidone capsules are indicated for the treatment of schizophrenia, as monotherapy for the acute treatment of bipolar manic or mixed episodes, and as an adjunct to lithium or valproate for the maintenance treatment of bipolar disorder. When deciding among the alternative treatments available for the condition needing treatment, the prescriber should consider the finding of ziprasidone’s greater capacity to prolong the QT/QTc interval compared to several other antipsychotic drugs [see Warnings and Precautions (5.3)]. Prolongation of the QTc interval is associated in some other drugs with the ability to cause torsade de pointes-type arrhythmia, a potentially fatal polymorphic ventricular tachycardia, and sudden death. In many cases this would lead to the conclusion that other drugs should be tried first. Whether ziprasidone will cause torsade de pointes or increase the rate of sudden death is not yet known [see Warnings and Precautions (5.3)]. Schizophrenia: 1 Ziprasidone capsules are indicated for the treatment of schizophrenia in adults [see Clinical Studies (14.1)].</IndicationAndUsage>
<Description>Ziprasidone capsules, USP contains the active moiety, ziprasidone in the form of ziprasidone hydrochloride, USP salt. Ziprasidone is a psychotropic agent that is chemically unrelated to phenothiazine or butyrophenone antipsychotic agents. It has a molecular weight of 412.94 (free base), with the following chemical name: 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one. The molecular formula of C21H21ClN4OS (free base of ziprasidone) represents the following structural formula. Ziprasidone capsules, USP contain a hydrochloride salt of ziprasidone. Chemically, ziprasidone hydrochloride USP is 5-[2-[4-(1,2-benzisothiazol-3-yl)-1-piperazinyl]ethyl]-6-chloro-1,3-dihydro-2H-indol-2-one, hydrochloride. The molecular formula is C21H21ClN4OS · HCl and its molecular weight is 449.40. Ziprasidone hydrochloride USP is a light pink to pink colored powder. Ziprasidone capsules, USP are supplied for oral administration in 20 mg, 40 mg, 60 mg, and 80 mg capsules. Ziprasidone capsules, USP contain ziprasidone hydrochloride USP, anhydrous lactose, magnesium stearate, polysorbate 80, povidone (PVK-30), pregelatinized starch and silicon dioxide. The components of the capsule shells are FD&C Blue #1, FD&C Red #3, gelatin, red iron oxide and titanium dioxide. The capsule shells are imprinted with black ink. The components of black ink (Black SW-9008/SW-9009) are black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. Ziprasidone capsules meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>60760-258-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (60760-258-90)</PackageDescription>
<NDC11Code>60760-0258-90</NDC11Code>
<ProductNDC>60760-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130710</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075805</ApplicationNumber>
<LabelerName>St Marys Medical Park Pharmacy</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-04</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>61919-258-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (61919-258-90) </PackageDescription>
<NDC11Code>61919-0258-90</NDC11Code>
<ProductNDC>61919-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091650</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.1.1 Prevention of Cardiovascular Disease In adult patients without clinically evident coronary heart disease, but with multiple risk factors for coronary heart disease such as age, smoking, hypertension, low HDL-C, or a family history of early coronary heart disease, atorvastatin calcium tablets are indicated to: Reduce the risk of myocardial infarction Reduce the risk of stroke Reduce the risk for revascularization procedures and anginaIn patients with type 2 diabetes, and without clinically evident coronary heart disease, but with multiple risk factors for coronary heart disease such as retinopathy, albuminuria, smoking, or hypertension, atorvastatin calcium tablets are indicated to:Reduce the risk of myocardial infarction Reduce the risk of strokeIn patients with clinically evident coronary heart disease, atorvastatin calcium tablets are indicated to:Reduce the risk of non-fatal myocardial infarction Reduce the risk of fatal and non-fatal stroke Reduce the risk for revascularization procedures Reduce the risk of hospitalization for CHF Reduce the risk of angina1.2 Hyperlipidemia Atorvastatin calcium tablets are indicated:As an adjunct to diet to reduce elevated total-C, LDL-C, apo B, and TG levels and to increase HDL-C in patients with primary hypercholesterolemia (heterozygous familial and nonfamilial) and mixed dyslipidemia (Fredrickson Types IIa and IIb);As an adjunct to diet for the treatment of patients with elevated serum TG levels (Fredrickson Type IV);For the treatment of patients with primary dysbetalipoproteinemia (Fredrickson Type III) who do not respond adequately to diet;To reduce total-C and LDL-C in patients with homozygous familial hypercholesterolemia as an adjunct to other lipid-lowering treatments (e.g., LDL apheresis) or if such treatments are unavailable;As an adjunct to diet to reduce total-C, LDL-C, and apo B levels in boys and postmenarchal girls, 10 to 17 years of age, with heterozygous familial hypercholesterolemia if after an adequate trial of diet therapy the following findings are present: a. LDL-C remains ≥ 190 mg/dL or b. LDL-C remains ≥ 160 mg/dL and:there is a positive family history of premature cardiovascular disease ortwo or more other CVD risk factors are present in the pediatric patient 1.3 Limitations of Use Atorvastatin calcium tablets have not been studied in conditions where the major lipoprotein abnormality is elevation of chylomicrons (Fredrickson Types I and V).</IndicationAndUsage>
<Description>Atorvastatin calcium is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino) carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1). The molecular formula of atorvastatin calcium is C66H68CaF2N4O10and its molecular weight is 1155.36. Its structural formula is. structure. Atorvastatin calcium is a white to off-white colored powder free from visible extraneous matter. Atorvastatin calcium is soluble in dimethyl sulphoxide, slightly soluble in alcohol, very slightly soluble in water, in pH 7.4 phosphate buffer and in acetonitrile and practically insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium tablets for oral administration contain 10, 20 and 40 mg atorvastatin and the following inactive ingredients: Basic butylated methacrylate copolymer, crospovidone, hydroxy propyl cellulose, lactose monohydrate, magnesium stearate, methanol, microcrystalline cellulose, sodium bicarbonate and sodium lauryl sulphate. The tablet coating contains isopropyl alcohol, methylene chloride and coloring agent opadry OY-58900 white contains polyethylene glycol, titanium dioxide and hypromellose.</Description>
</NDC>
<NDC>
<NDCCode>63187-258-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (63187-258-90) </PackageDescription>
<NDC11Code>63187-0258-90</NDC11Code>
<ProductNDC>63187-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200294</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-01-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Chemically, meclizine hydrochloride is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. C25H27CIN2·2HCl·H20 M.W. 481.89. Meclizine hydrochloride tablets, USP are available in two different strengths, 12.5 mg and 25 mg. Inactive ingredients: microcrystalline cellulose, lactose monohydrate, croscarmellose sodium and magnesium stearate. The 12.5 mg tablet also contains FD&C Blue #1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>67877-258-90</NDCCode>
<PackageDescription>9 BOTTLE in 1 CARTON (67877-258-90) / 10 TABLET, CHEWABLE in 1 BOTTLE (67877-258-11) </PackageDescription>
<NDC11Code>67877-0258-90</NDC11Code>
<ProductNDC>67877-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lanthanum Carbonate</ProprietaryName>
<NonProprietaryName>Lanthanum Carbonate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202329</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>LANTHANUM CARBONATE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lanthanum carbonate is a phosphate binder indicated to reduce serum phosphate in patients with end-stage renal disease (ESRD). Management of elevated serum phosphorus levels in patients with ESRD usually includes all of the following: reduction in dietary intake of phosphate, removal of phosphate by dialysis, and reduction of intestinal phosphate absorption with phosphate binders.</IndicationAndUsage>
<Description>Lanthanum carbonate chewable tablet contains lanthanum carbonate with molecular formula La2(CO3)3 xH2O (where x=8 moles of water) and molecular weight 457.8 (anhydrous mass). Lanthanum carbonate octahydrate is insoluble in water and soluble in acids. The molecular weight of lanthanum carbonate octahydrate is 601.95 g/mol. Each white to off-white, round flat with a beveled edge chewable tablet contains lanthanum carbonate hydrate equivalent to 500, 750, or 1,000 mg of elemental lanthanum and the following inactive ingredients: maltitol, crospovidone and sodium stearyl fumarate. The chemical structure of lanthanum carbonate octahydrate is.</Description>
</NDC>
<NDC>
<NDCCode>68225-258-00</NDCCode>
<PackageDescription>90 VIAL in 1 BOX (68225-258-00) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>68225-0258-00</NDC11Code>
<ProductNDC>68225-258</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Mogamulizumab-kpkc</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<StartMarketingDate>20241026</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Patheon Italia S.p.A.</LabelerName>
<SubstanceName>MOGAMULIZUMAB</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-05-07</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>26-OCT-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>69452-258-19</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (69452-258-19) </PackageDescription>
<NDC11Code>69452-0258-19</NDC11Code>
<ProductNDC>69452-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Droxidopa</ProprietaryName>
<NonProprietaryName>Droxidopa</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213033</ApplicationNumber>
<LabelerName>Bionpharma Inc.</LabelerName>
<SubstanceName>DROXIDOPA</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Catecholamines [CS], Increased Blood Pressure [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Droxidopa capsule is indicated for the treatment of orthostatic dizziness, lightheadedness, or the “feeling that you are about to black out” in adult patients with symptomatic neurogenic orthostatic hypotension (nOH) caused by primary autonomic failure (Parkinson's disease [PD], multiple system atrophy, and pure autonomic failure), dopamine beta-hydroxylase deficiency, and non-diabetic autonomic neuropathy. Effectiveness beyond 2 weeks of treatment has not been established. The continued effectiveness of Droxidopa capsule should be assessed periodically.</IndicationAndUsage>
<Description>Droxidopa capsules contain droxidopa, which is a synthetic amino acid precursor of norepinephrine, for oral administration. Chemically, droxidopa is (–)-threo-3-(3,4-Dihydroxyphenyl)-L-serine. It has the following structural formula. Droxidopa is an odorless, tasteless, white to off-white crystals or crystalline powder. It is slightly soluble in water, and practically insoluble in methanol, glacial acetic acid, ethanol, acetone, ether, and chloroform. It is soluble in dilute hydrochloric acid. It has a molecular weight of 213.19 and a molecular formula of C 9H 11NO 5. Droxidopa capsules also contain the following inactive ingredients: mannitol, corn starch, and magnesium stearate. The capsule shell is printed with black ink. The black inks contain shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. The capsule shell contains the following inactive ingredients: 100 mg – gelatin, titanium dioxide, FD&C Blue No. 2, black iron oxide, red iron oxide, water and SLS; 200 mg – gelatin, titanium dioxide, FD&C Blue No. 2, black iron oxide, iron oxide yellow, water and SLS; 300 mg – gelatin, titanium dioxide, FD&C Blue No. 1, FD&C Yellow No.,5 (tartrazine), FD&C Red No. 40, water and SLS. Droxidopa capsules differ in size and color by strength [see Dosage Forms and Strengths (3)].</Description>
</NDC>
<NDC>
<NDCCode>71610-258-60</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71610-258-60) </PackageDescription>
<NDC11Code>71610-0258-60</NDC11Code>
<ProductNDC>71610-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110805</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090700</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil hydrochloride extended-release tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.</IndicationAndUsage>
<Description>Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below. C27H38N2O4·HCl..........M.W. 491.06. Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>72603-258-03</NDCCode>
<PackageDescription>3 BOTTLE in 1 CARTON (72603-258-03) / 90 TABLET, FILM COATED in 1 BOTTLE (72603-258-01) </PackageDescription>
<NDC11Code>72603-0258-03</NDC11Code>
<ProductNDC>72603-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pirfenidone</ProprietaryName>
<NonProprietaryName>Pirfenidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212772</ApplicationNumber>
<LabelerName>Northstar Rx LLC</LabelerName>
<SubstanceName>PIRFENIDONE</SubstanceName>
<StrengthNumber>267</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Pyridone [EPC], Pyridones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pirfenidone tablet is indicated for the treatment of idiopathic pulmonary fibrosis (IPF).</IndicationAndUsage>
<Description>Pirfenidone belongs to the chemical class of pyridone. Pirfenidone is available as film-coated tablets containing 267 mg and 801 mg pirfenidone. Pirfenidone has a molecular formula of C12H11NO and a molecular weight of 185.23. Pirfenidone has the following structural formula, which has been referred to as 5-methyl-1-phenyl-2-1(H)-pyridone or 5-methyl-1-phenyl-2-(1H)-pyridone. Pirfenidone is a white to pale yellow, non-hygroscopic powder. It is freely soluble in dichloromethane, methanol, soluble in ethanol and practically insoluble in water. The melting point is approximately 109°C.Pirfenidone tablets contain pirfenidone and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, titanium dioxide, macrogol (polyethylene glycol) and talc.</Description>
</NDC>
<NDC>
<NDCCode>72865-258-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (72865-258-90) </PackageDescription>
<NDC11Code>72865-0258-90</NDC11Code>
<ProductNDC>72865-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Torsemide</ProprietaryName>
<NonProprietaryName>Torsemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079234</ApplicationNumber>
<LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TORSEMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Torsemide tablets are a loop diuretic indicated for: the treatment of edema associated with heart failure, renal disease or hepatic disease. (1.1) the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).</IndicationAndUsage>
<Description>Torsemide is a diuretic of the pyridine-sulfonylurea class. Its chemical name is 1-isopropyl-3-[(4-m-toluidino-3-pyridyl) sulfonyl]urea and its structural formula is. Its molecular formula is C 16H 20N 4O 3S, its pKa is 6.42, and its molecular weight is 348.43. Torsemide USP is a white to off-white crystalline powder. The tablets for oral administration also contain crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose and povidone.</Description>
</NDC>
<NDC>
<NDCCode>75834-258-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (75834-258-90) </PackageDescription>
<NDC11Code>75834-0258-90</NDC11Code>
<ProductNDC>75834-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atorvastatin Calcium</ProprietaryName>
<NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200826</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213853</ApplicationNumber>
<LabelerName>NIVAGEN PHARMACEUTICALS, INC.</LabelerName>
<SubstanceName>ATORVASTATIN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atorvastatin calcium tablets are indicated. : 1 To reduce the risk of: Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHDMI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHDNon-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD, 2 As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in: Adults with primary hyperlipidemia.Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH)., 3 As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH)., 4 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemiaHypertriglyceridemia.</IndicationAndUsage>
<Description>Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. Atorvastatin calcium is [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H- pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The empirical formula of atorvastatin calcium is C 66H 68CaF 2N 4O 10.3H 2O and its molecular weight is 1209.42. Its structural formula is:. Atorvastatin calcium is a white to off-white powder that is insoluble in aqueous solutions of pH 4 and below. Atorvastatin calcium is soluble to freely soluble in methanol, slightly soluble in alcohol, insoluble to very slightly soluble in distilled water, in pH 7.4 phosphate buffer and in acetonitrile. Atorvastatin calcium tablets, USP for oral use contain atorvastatin 10 mg, 20 mg, 40 mg, or 80 mg (equivalent to 10.359 mg, 20.718 mg, 41.436 mg, or 82.872 mg atorvastatin calcium trihydrate) and the following inactive ingredients: Croscarmellose sodium, NF; Hydroxy propyl cellulose, NF; , Lactose monohydrate, NF; Magnesium stearate, NF; , Microcrystalline cellulose, NF; Polysorbate 80, NF; Precipitated calcium carbonate, NF; Hypromellose; Macrogol; Talc and Titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-258-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-258-90) </PackageDescription>
<NDC11Code>76420-0258-90</NDC11Code>
<ProductNDC>76420-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methocarbamol</ProprietaryName>
<NonProprietaryName>Methocarbamol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040489</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>METHOCARBAMOL</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Methocarbamol Tablets, USP, 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C 11H 15NO 5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Each tablet, for oral administration, contains 750 mg of methocarbamol, USP. The inactive ingredients present are colloidal silicon dioxide, magnesium stearate, povidone, pregelatinized corn starch, purified water, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>55700-258-30</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (55700-258-30)</PackageDescription>
<NDC11Code>55700-0258-30</NDC11Code>
<ProductNDC>55700-258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nifedipine</ProprietaryName>
<NonProprietaryName>Nifedipine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130802</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076070</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>NIFEDIPINE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-11-05</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55910-012-15</NDCCode>
<PackageDescription>258 g in 1 CAN (55910-012-15) </PackageDescription>
<NDC11Code>55910-0012-15</NDC11Code>
<ProductNDC>55910-012</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate,otisalate, Octocrylene</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>OLD EAST MAIN CO</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>90; 225; 250; 1000</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other skin protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68025-077-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68025-077-90) </PackageDescription>
<NDC11Code>68025-0077-90</NDC11Code>
<ProductNDC>68025-077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Osmolex Er</ProprietaryName>
<NonProprietaryName>Amantadine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209410</ApplicationNumber>
<LabelerName>Vertical Pharmaceuticals, LLC</LabelerName>
<SubstanceName>AMANTADINE</SubstanceName>
<StrengthNumber>258</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Influenza A M2 Protein Inhibitor [EPC],M2 Protein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71205-001-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-001-90) </PackageDescription>
<NDC11Code>71205-0001-90</NDC11Code>
<ProductNDC>71205-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088628</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]: 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia,, 2 Have not been tolerated, or are not expected to be tolerated.</IndicationAndUsage>
<Description>Acetaminophen and codeine phosphate are supplied in tablet form for oral administration. Acetaminophen, USP, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. C8H9NO2 M.W. 151.16. Codeine phosphate, USP, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. C18H21NO3H3PO4½H2O M.W. 406.37. Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/15 mg) contains: 1 Acetaminophen, USP...........................300 mgCodeine Phosphate, USP.......................15 mg.</Description>
</NDC>
<NDC>
<NDCCode>71205-003-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-003-90) </PackageDescription>
<NDC11Code>71205-0003-90</NDC11Code>
<ProductNDC>71205-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate</ProprietaryName>
<NonProprietaryName>Metoprolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202871</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>METOPROLOL TARTRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypertension Metoprolol tartrate tablets are indicated for the treatment of hypertension. They may be used alone or in combination with other antihypertensive agents. Angina Pectoris Metoprolol tartrate tablets are indicated in the long-term treatment of angina pectoris. Myocardial Infarction. Metoprolol tartrate tablets are indicated in the treatment of hemodynamically stable patients with definite or suspected acute myocardial infarction to reduce cardiovascular mortality when used alone or in conjunction with intravenous metoprolol. Oral metoprolol therapy can be initiated after intravenous metoprolol therapy or, alternatively, oral treatment can begin within 3 to 10 days of the acute event (see DOSAGE AND ADMINISTRATION, CONTRAINDICATIONS, and WARNINGS.</IndicationAndUsage>
<Description>Metoprolol tartrate, USP is a selective beta1-adrenoreceptor blocking agent, available as 25 mg, 50 mg and 100 mg tablets for oral administration. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-2-methoxyethyl)phenoxy]-2-propanol L-(+)-tartrate (2:1) salt, its structural formula is. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.82. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether. Each tablet for oral administration contains 25 mg, 50 mg or 100 mg of metoprolol tartrate and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, povidone, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate hypromellose, titanium dioxide and polyethylene glycol. In addition, the 50 mg product contains D&C Red No. 30 Aluminum Lake and the 100 mg product contains FD&C Blue No. 2 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake as coloring agents.</Description>
</NDC>
<NDC>
<NDCCode>71205-004-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-004-90) </PackageDescription>
<NDC11Code>71205-0004-90</NDC11Code>
<ProductNDC>71205-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091519</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 320</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160 mmHg/100 mmHg has about a 41% likelihood of achieving a goal of less than 140 mmHg (systolic) and 60% likelihood of achieving less than 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, USP a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2′-(1H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide, USP is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the film-coated tablets are microcrystalline cellulose, croscarmellose sodium, sodium dodecyl sulphate, hydroxypropylcellulose, silicified microcrystalline cellulose, low substituted hydroxypropylcellulose, magnesium stearate, polyvinyl alcohol-part. hydrolyzed, titanium dioxide, talc, polyethylene glycol, and iron oxide yellow. In addition, 80 mg /12.5 mg and 160 mg/12.5 mg tablets contain FD&C red#40 /allura red AC aluminum lake, 80 mg /12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg and 320 mg/12.5 mg tablets contain iron oxide black, and 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg tablets contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>71205-005-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71205-005-90) </PackageDescription>
<NDC11Code>71205-0005-90</NDC11Code>
<ProductNDC>71205-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208706</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major Depressive Disorder [see Clinical Studies (14.1)]. , 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)]. , 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)]. , 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].</IndicationAndUsage>
<Description>Duloxetine hydrochloride USP is a selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include sugar spheres, hypromellose, sucrose, talc, methacrylic acid copolymer dispersion, and triethyl citrate. The capsule shell contains gelatin, FD&C Blue No. 2, titanium dioxide, and sodium lauryl sulfate. For 20 mg, 30 mg (body & cap) and 60 mg (body only) strengths, imprinting black ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, potassium hydroxide and purified water. For 60 mg (cap only) strength, imprinting white ink contains shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, purified water, potassium hydroxide, and titanium dioxide. USP Assay & Organic Impurities test pending.</Description>
</NDC>
<NDC>
<NDCCode>71205-007-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-007-90) </PackageDescription>
<NDC11Code>71205-0007-90</NDC11Code>
<ProductNDC>71205-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ranitidine</ProprietaryName>
<ProprietaryNameSuffix>Immediate Release</ProprietaryNameSuffix>
<NonProprietaryName>Ranitidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205512</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>RANITIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71205-008-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-008-90) </PackageDescription>
<NDC11Code>71205-0008-90</NDC11Code>
<ProductNDC>71205-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206434</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pediatric use information for patients 7 to 17 years of age is approved for AstraZeneca’s CRESTOR (rosuvastatin calcium) tablets. However, due to AstraZeneca’s marketing exclusivity rights, this drug product is not labeled with that pediatric information.</IndicationAndUsage>
<Description>Rosuvastatin calcium is a synthetic lipid-lowering agent for oral administration. The chemical name for rosuvastatin calcium is bis[(E)-7-[4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] pyrimidin-5-yl](3R,5S)-3,5-dihydroxyhept-6-enoic acid] calcium salt with the following structural formula. The empirical formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1001.14. Rosuvastatin calcium is a white amorphous powder that is sparingly soluble in water and methanol, and slightly soluble in ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin calcium tablets for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: For 5 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, and ferric oxide yellow. For 10, 20 and 40 mg: Each film coated tablet contains: microcrystalline cellulose, lactose monohydrate, anhydrous lactose, crospovidone, magnesium oxide, magnesium stearate, hypromellose, triacetin, titanium dioxide, FD & C yellow No. 6, FD & C red No. 40, and FD & C blue No.1.</Description>
</NDC>
<NDC>
<NDCCode>71205-015-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-015-90) </PackageDescription>
<NDC11Code>71205-0015-90</NDC11Code>
<ProductNDC>71205-015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>71205-016-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-016-90) </PackageDescription>
<NDC11Code>71205-0016-90</NDC11Code>
<ProductNDC>71205-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metaxalone</ProprietaryName>
<NonProprietaryName>Metaxalone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207466</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>METAXALONE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metaxalone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomforts associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Metaxalone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Metaxalone Tablets, USP are available as an 800 mg, capsule shaped, scored pink tablet.Chemically, metaxalone, USP is 5-[(3,5-dimethylphenoxy)methyl]-2-oxazolidinone. The empirical formula is C12H15NO3, which corresponds to a molecular weight of 221.25. The structural formula is. Metaxalone, USP is a white to almost white, crystalline powder freely soluble in dichloromethane, soluble in methanol, sparingly soluble in ethanol and ethyl acetate, slightly soluble in toluene and isopropanol, insoluble in water and n-hexane. Each tablet contains 800 mg metaxalone, USP and the following inactive ingredients: alginic acid, corn starch, ferric oxide red, copovidone, magnesium stearate, povidone, pregelatinized starch, sodium alginate.</Description>
</NDC>
<NDC>
<NDCCode>71205-017-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71205-017-90) </PackageDescription>
<NDC11Code>71205-0017-90</NDC11Code>
<ProductNDC>71205-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078906</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil hydrochloride extended-release tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy.</IndicationAndUsage>
<Description>Verapamil hydrochloride extended-release tablets USP are calcium ion influx inhibitor (slow channel blocker or calcium ion antagonist). Verapamil hydrochloride extended-release tablets USP are available for oral administration as brown colored, oval, biconvex, film-coated tablets containing 120 mg verapamil hydrochloride USP, as brown colored, oval, biconvex, film-coated tablets containing 180 mg verapamil hydrochloride USP, and as brown colored, oval, biconvex, film-coated tablets containing 240 mg verapamil hydrochloride USP. The tablets are designed for sustained release of the drug in the gastrointestinal tract; sustained-release characteristics are not altered when the tablet is divided in half. The structural formula of verapamil HCl USP is given below. C27H38N2O4·HCl..........M.W. 491.06. Benzeneacetonitrile, α[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4- dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil HCl USP is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform and methanol. Verapamil HCl USP is not chemically related to other cardioactive drugs. In addition to verapamil HCl USP, the verapamil hydrochloride extended-release tablets USP contain the following ingredients: colloidal silicon dioxide, sodium alginate, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyethylene glycol and titanium dioxide. The following are the color additives per tablet strength. Verapamil hydrochloride extended-release tablets USP, 120 mg, 180 mg and 240 mg meet USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>71205-018-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-018-90) </PackageDescription>
<NDC11Code>71205-0018-90</NDC11Code>
<ProductNDC>71205-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020301</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021342</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levothyroxine sodium is used for the following indications. Hypothyroidism – As replacement or supplemental therapy in congenital or acquired hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. Specific indications include: primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) hypothyroidism and subclinical hypothyroidism. Primary hypothyroidism may result from functional deficiency, primary atrophy, partial or total congenital absence of the thyroid gland, or from the effects of surgery, radiation, or drugs, with or without the presence of goiter. Pituitary TSH Suppression – In the treatment or prevention of various types of euthyroid goiters (see WARNINGS and PRECAUTIONS), including thyroid nodules (see WARNINGS and PRECAUTIONS), subacute or chronic lymphocytic thyroiditis (Hashimoto’s thyroiditis), multinodular goiter (see WARNINGS and PRECAUTIONS) and, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contains synthetic crystalline L-3,3’,5,5’-tetraiodothyronine sodium salt [levothyroxine (T 4) sodium]. Synthetic T 4 is identical to that produced in the human thyroid gland. Levothyroxine (T 4) sodium has an empirical formula of C 15H 10I 4N NaO 4 x H 2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:.</Description>
</NDC>
<NDC>
<NDCCode>71205-019-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71205-019-90) </PackageDescription>
<NDC11Code>71205-0019-90</NDC11Code>
<ProductNDC>71205-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methocarbamol</ProprietaryName>
<NonProprietaryName>Methocarbamol</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150713</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200958</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>METHOCARBAMOL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methocarbamol is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Methocarbamol Tablets USP, 500 mg and 750 mg, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 3-(2-methoxyphenoxy)-1, 2-propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and chloroform, soluble in alcohol (only with heating) and propylene glycol, and insoluble in benzene and n-hexane. Methocarbamol tablet, 500 mg is available as an orange, film coated, round convex tablet containing 500 mg of methocarbamol, USP for oral administration. The inactive ingredients present are microcrystalline cellulose, croscarmellose sodium, FD&C Yellow 6 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, triacetin, titanium dioxide. Methocarbamol tablet, 750 mg is available as a yellow, film coated, modified capsule shaped tablet containing 750 mg of methocarbamol, USP for oral administration. The inactive ingredients present are microcrystalline cellulose, croscarmellose sodium, iron oxide yellow, iron oxide red, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, triacetin, titanium dioxide.</Description>
</NDC>
</NDCList>